Compare commits

..
1043 Commits
Author SHA1 Message Date
Jonathan Naylor 046e1df161 Merge pull request #362 from n0mjs710/link-audio-fidelity
FM link-mode network audio: anti-alias/reconstruction filtering
2026-08-16 17:36:20 +01:00
Cort Buffington d70ab85bae Copy-construct the ds/us filters from m_filterStage1/2/3
Same coefficients, no need to retype them. CFMDirectFormI's copy ctor
already copies coefficients and (zeroed, at this point) state.
2026-08-13 13:52:06 -05:00
Cort Buffington 384c5d559d Reconstruction filter after ext-audio upsampling in FM mode
CFMUpSampler zero-stuffs 8kHz to 24kHz with no lowpass after it,
leaving imaging artifacts in the reconstructed ext audio. Filter it
with a second, separately-stated pass of the same 300-2700Hz design
already used for TX shaping, right where it comes out of the upsampler.
2026-08-12 07:43:23 -05:00
Cort Buffington 4c7e8fbe46 Anti-alias filter before RF->network downsampling in FM mode
The 24kHz->8kHz decimation in CFMDownSampler had no lowpass ahead of
it, aliasing everything above 4kHz back into the audio band. Reuse
the existing 300-2700Hz filter design (separate instance/state) ahead
of all three addSample() call sites in FM.cpp.

Also: reset() wasn't clearing the ring buffer or in-progress sample
pack, so stale audio could bleed into the next transmission. And
addSample() packed samples into 12 bits with no saturation, so an
out-of-range value corrupted the neighbouring sample.
2026-08-11 09:57:47 -05:00
Jonathan Naylor 894ba76432 Merge pull request #361 from n0mjs710/link-mode-ext-gap
Link mode ext audio gap
2026-08-11 15:02:32 +01:00
Cort Buffington 8a89804fda Refactor FM_LINK_EXT_GAP_MS and improve comments
Updated the FM_LINK_EXT_GAP_MS constant declaration and added comments for clarity.
2026-08-11 08:55:22 -05:00
Cort Buffington 8bd467598c Debounce link-mode external-audio underrun before dropping PTT
Under [FM] LinkMode=1, linkStateMachine() set m_extSignal false the
instant a single ext-audio sample went missing, with no debounce --
unlike the non-link duplex/simplex paths, which already tolerate a
brief gap via the RELAYING_EXT -> RELAYING_WAIT_EXT / m_ackDelayTimer
pattern before declaring a real loss. Since IO::process() drops PTT
the moment the downstream TX buffer runs dry, that zero-debounce cutoff
meant even a very brief, late-but-recoverable gap from the gateway
(scheduling jitter, a late UDP frame, etc.) could cascade into a full
PTT drop-and-rekey cycle -- far more audible than the underlying gap
itself.

Adds m_extGapTimer, mirroring the existing pattern: on the first missed
sample, start the timer instead of immediately clearing m_extSignal; a
gap that recovers before FM_LINK_EXT_GAP_MS (default 60ms) expires
never affects m_extSignal at all, so the transmitter never notices.
Only a gap that outlasts the timer is treated as a genuine end of
transmission, exactly as before.

linkSamples()'s currentExtSample is now zero-initialized, since
m_extSignal can now stay true for a few samples past an underrun --
silence, not stack garbage, must be what gets played out to the modem
during that window.
2026-08-09 11:42:20 -05:00
Jonathan Naylor 715d3f5839 Merge pull request #359 from chancellor1101/bugfixes
Fix several small bugs: STM UART repeater port, FM noise squelch, Due FM LED, DMR trunking state
2026-07-13 12:07:39 +01:00
Clint Chance 68252f15f5 Fix the FM 25kHz calibration debug message.
It said 10kHz, a copy and paste from the case above.
2026-07-12 16:45:24 -05:00
Clint Chance 96061a6013 Make DMR trunking state handling order-independent.
The CSBK slot type was only encoded into the ALOHA frame inside
setColorCode(), so it took effect only if a reconfigure happened after
an ALOHA frame had already been received; on the usual command ordering
(SET_CONFIG then ALOHA) the transmitted slot type depended entirely on
the host-supplied bytes. Remember the colour code and stamp the slot
type in writeAloha() as well.

Also clear m_controlChannel when trunking is disabled, so the host has
a way to stop control channel transmission other than rebooting, and
fix a stray tab introduced in createCACH().
2026-07-12 16:45:24 -05:00
Clint Chance 90220cbb9d Fix the FM mode LED pin guard on the Arduino Due.
The pinMode() call for PIN_FM was guarded by USE_ALTERNATE_POCSAG_LEDS
instead of USE_ALTERNATE_FM_LEDS, a copy and paste error. The Teensy
version and the setFMInt() implementation in this file both use the FM
macro.
2026-07-12 16:42:58 -05:00
Clint Chance 2eb6f7fd06 Initialise and reset the FM noise squelch invalid counter.
m_invalidCount was missing from the constructor initialiser list and was
read uninitialised in process(), making the squelch behaviour after
power-up indeterminate. reset() also cleared neither hysteresis counter,
so state leaked across squelch resets.
2026-07-12 16:42:58 -05:00
Clint Chance a1794b44ed Fix RX interrupt flag being cleared on the wrong USART in STMUART.
handleIRQ() hardcoded USART1 when clearing the RXNE pending bit, so on
boards where the repeater/display UART is not USART1 (Nucleo, Discovery,
F767, UART5-based boards) the flag was cleared on the wrong peripheral.
Use the m_usart member, matching the TXE handling below.

Also fix flush(): it passed a flag constant to USART_GetITStatus and
span while TXE was set, which returns immediately since TXE indicates
the data register is already empty. Wait for the software TX FIFO to
drain and then for the TC flag, which indicates the shift register has
actually emptied.
2026-07-12 16:42:47 -05:00
Jonathan Naylor 57e692ad8c Small cleanups of the DMR trunking code. 2026-04-24 16:54:23 +01:00
Jonathan Naylor 841d7505c2 Merge pull request #358 from qradiolink/trunking_patches
Add support for DMR tier III trunking
2026-04-24 14:50:28 +01:00
adrian 549dfd7258 Change DMR ALOHA header to 0x17 2026-04-19 11:32:07 +03:00
adrian 30ba4c4c55 Fix merge gone wrong in DMRTX.cpp 2026-04-19 11:12:37 +03:00
adrian a696fd454c DMR trunking patches to DMRTX and SerialPort 2026-04-18 11:29:48 +03:00
Jonathan Naylor 3fd84d5ed4 Fix merge compilation issue. 2026-02-19 15:59:46 +00:00
Jonathan Naylor 78216afbb7 Clean up the ring buffer. 2026-02-18 13:40:05 +00:00
Jonathan Naylor 0308bfc6c7 Merge branch 'master' into mqtt 2026-02-18 13:36:22 +00:00
Jonathan Naylor 278c69152a Merge pull request #356 from F4FXL/C++11-Flags 2026-01-20 20:31:18 +00:00
Geoffrey Merck 8e144e81d0 Add C++11 standard flag to compiler flags
Debian Trixie ships with arm-none-eabi-g++ v14.2.1 which defaults to c++17, this forces compilation with c++11
2026-01-20 20:29:04 +01:00
Jonathan Naylor 5dd59fc473 Merge branch 'master' into mqtt 2025-08-28 17:00:21 +01:00
Jonathan Naylor 5fb5986d50 Remove M17 and AX.25 2025-08-27 18:35:30 +01:00
Jonathan Naylor 824c9b9852 Widened the size of serial data going into M17 and FM. 2025-01-13 15:05:28 +00:00
Jonathan Naylor f324f96db7 Increase the number of frames before YSF declares a signal to be lost. 2024-11-21 17:50:15 +00:00
Jonathan Naylor 15227d9cec Merge branch 'master' into mqtt 2024-10-02 16:10:09 +01:00
Jonathan Naylor c3246dbcb7 Merge branch 'master' of https://github.com/g4klx/MMDVM 2024-10-02 16:05:48 +01:00
Jonathan Naylor 65c51bf849 Merge branch 'master' into mqtt 2024-08-01 12:55:06 +01:00
Jonathan Naylor edd60caad3 Remove the deprecated register keyword. 2024-07-31 19:25:59 +01:00
Jonathan Naylor b8a0f7b1cf Merge pull request #343 from mytechguyri/master
Added option to configure Serial Repeater baud rate
2024-03-10 18:28:44 +00:00
John Tetreault 28e564738e Added option to configure Serial Repeater baud rate so end user can set to 115,200 for high speed Nextion display 2024-03-10 14:19:21 -04:00
Jonathan Naylor a7fddc37e1 Don't send a status when the FM repeater is reset, it causes a loop. 2023-11-18 16:45:36 +00:00
Jonathan Naylor a8bf99037e Merge branch 'master' into mqtt 2023-11-09 19:13:12 +00:00
Jonathan Naylor 029e6df4b9 Remove support for STM32F1* boards, they're just too slow. 2023-11-09 19:08:15 +00:00
Jonathan Naylor 85d3086d4c Restart the RSSI ADC conversion in the STM32 interrupt to match the signal ADC. 2023-10-10 20:06:50 +01:00
Jonathan Naylor ccf3b7301e Make the type correct for silence frames. 2023-10-10 20:03:01 +01:00
Jonathan Naylor 6b3a811ae7 Simplify the serial repeater code. 2023-10-05 19:49:17 +01:00
Jonathan Naylor 508018c89c Add the MMDVM serial protocol document from December 2015. 2023-09-22 16:51:03 +01:00
Jonathan Naylor 3e079f58ad Add RSSI reporting to FM and AX.25 2023-08-02 17:34:52 +01:00
Jonathan Naylor 7ef0d992d9 Improve the status reporting for FM mode. 2023-01-18 14:30:02 +00:00
Jonathan Naylor bf23a94038 Merge pull request #334 from n0mjs710/master 2023-01-09 15:17:17 +00:00
Cort Buffington b2755864ef Adding support for WA0EDA STM32-DVM-MTR2K v2.0d with FM LED, and a (commented) line to compile for 500000 serial port speed to support the WA0EDA MODEMs and others that use Armbian + AllWinner H2/H3 SOC that does not support 4600800. 2023-01-09 07:06:42 -06:00
Jonathan Naylor 7276ca3929 Update Version.h 2022-11-21 19:14:24 +00:00
Jonathan Naylor d14b9dede3 Update Version.h 2022-11-21 19:14:14 +00:00
Jonathan Naylor de87d77ad6 Merge pull request #330 from spongegovo/pocsagax25_fix
Fixed Serial protocol issue where MMDVMHost could not send POCSAG or AX25 to the MMDVM
2022-11-21 19:13:21 +00:00
spongegovo 2626ad5580 Update SerialPort.cpp 2022-11-20 09:15:59 +11:00
Jonathan Naylor 031b078e76 Merge pull request #327 from shawnchain/fix_ax25_dac_overflow_error 2022-09-13 14:09:12 +01:00
Shawn Chain 5d987969a9 The AX25 sine value ranges from 0-4095, and inside io.write() will perform the calculation (value * q15_t(txLevel) >> 15) which may exceed 4096 and cause the DAC Overflow error 2022-09-13 20:18:03 +08:00
Jonathan Naylor f898390956 Bump the version date. 2021-12-20 23:00:13 +00:00
Jonathan Naylor f8d1cc7aed Fix crash on long data frames. 2021-12-20 22:57:40 +00:00
Jonathan Naylor cf9fa93cb9 Include the ARM copyright in the README file. 2021-12-18 22:38:26 +00:00
Jonathan Naylor 69adaf2ebb Update SerialTeensy.cpp 2021-12-18 22:34:24 +00:00
Jonathan Naylor 7f4ae790ba Update STM32Utils.h 2021-12-18 22:31:48 +00:00
Jonathan Naylor 416fc8fc8b Update the README. 2021-12-13 10:31:10 +00:00
Jonathan Naylor 5b79356ddb Merge pull request #324 from 1tilen/master
Added PB15 to comment with pins, changed STM32F4 to STM32F7 in line 23
2021-11-14 19:51:29 +00:00
Tilen 26fc87aca6 Added PB15 to comment with pins, changed STM32F4 to STM32F7 in line 23 2021-11-14 19:21:35 +01:00
Jonathan Naylor 54745130c2 Add the transmit function. 2021-10-27 21:28:43 +01:00
Jonathan Naylor f65d52bf2f Add M17 calibration mode. 2021-10-27 19:37:58 +01:00
Jonathan Naylor 5800b33f21 Split the DMR and YSF filtering 2021-10-26 20:51:21 +01:00
Jonathan Naylor 105dba2c27 Merge branch 'master' of github.com:g4klx/MMDVM 2021-10-26 17:43:51 +01:00
Jonathan Naylor 777cc9f2ea Fix typo 2021-10-26 17:43:34 +01:00
Jonathan Naylor e879b4615a Merge branch 'master' of https://github.com/g4klx/MMDVM 2021-10-25 20:03:36 +01:00
Jonathan Naylor 8d69fc59be Update the README file 2021-10-25 20:03:17 +01:00
Jonathan Naylor 2f4e9cc269 Remove unused configuration option 2021-10-25 19:47:31 +01:00
Jonathan Naylor ee07f76bd5 Split the repeater and link mode audio paths. 2021-09-30 18:16:51 +01:00
Jonathan Naylor d063a1da1e Change the EOT handling on TX. 2021-09-19 14:25:12 +01:00
Jonathan Naylor 6a4dad4c44 Change the LinkMode state machine. 2021-09-06 22:50:40 +01:00
Jonathan Naylor ed6bd66fab Rename SimpleMode to LinkMode. 2021-09-06 21:53:01 +01:00
Jonathan Naylor 1a07a6f0d1 Add more details to the simple FM state machine. 2021-09-05 19:46:01 +01:00
Jonathan Naylor 70bf47f93e Add a bery simple FM mode for internet gatewaying. 2021-09-05 19:06:56 +01:00
Jonathan Naylor a5eaafc7e0 Change a method name. 2021-08-26 17:39:52 +01:00
Jonathan Naylor 2200945857 Change the EOF sync pattern for simplicity. 2021-08-26 16:50:18 +01:00
Jonathan Naylor 63a8e61a45 Update to send and receive the new EOF marker. 2021-08-25 21:11:09 +01:00
Jonathan Naylor 7275f65e44 Reset the transmit levels to be correct. 2021-08-23 21:07:17 +01:00
Jonathan Naylor 2aabdb61ab Remove the last traces of M17 packet mode and fix a buffer overrun bug. 2021-08-08 18:55:09 +01:00
Jonathan Naylor 96c0e5b141 Fix compiler warnings when building for POG style boards. 2021-07-19 21:20:57 +01:00
Jonathan Naylor 9c883cfafd Revert "Restore SerialRB for POG builds."
This reverts commit 8a1ab88c3a.
2021-07-01 22:58:59 +01:00
Jonathan Naylor 8a1ab88c3a Restore SerialRB for POG builds. 2021-07-01 22:28:59 +01:00
Jonathan Naylor f4e1c0b401 Fix a potential issue with reporting the wrong command type in ACK and NAK messages. 2021-06-17 16:55:59 +01:00
Jonathan Naylor 43b53fe2fc Add a dummy return for the setting of the FM parameters when FM is not enabled. 2021-05-08 23:48:52 +01:00
Jonathan Naylor 6517229f87 Bump the version date. 2021-05-08 23:24:36 +01:00
Jonathan Naylor d0557ab723 Fix merge mistake which disabled serial access to the RB V5 board. 2021-05-08 23:22:25 +01:00
Jonathan Naylor b5d106dcb6 Merge branch 'master' into M17_AX25_FM 2021-05-05 21:01:19 +01:00
Jonathan Naylor 34cbff41c9 Merge pull request #317 from N4IRS/master 2021-05-02 15:00:12 +01:00
Steve N4IRS 752e13821f Add STM32F7-DVM board 2021-05-02 07:19:24 -04:00
Jonathan Naylor 86b45c15eb Merge branch 'master' into M17_AX25_FM 2021-04-20 20:38:14 +01:00
Jonathan Naylor 4fa0e052f8 Merge pull request #316 from N4IRS/master
RB STM32_DVM_F7 support
2021-04-20 12:51:10 +01:00
Steve N4IRS 0736a5cbe8 RB STM32_DVM_F7 support 2021-04-18 09:50:46 -04:00
Jonathan Naylor 6ffb68450c Allow for hex dumps of modem data by the host. 2021-04-11 18:15:19 +01:00
Jonathan Naylor 1ad20fd4a0 Disable packet mode in M17. 2021-04-07 19:02:04 +01:00
Jonathan Naylor 34f6dfc5bb Simplification of the M17 receiver. 2021-03-14 18:24:30 +00:00
Jonathan Naylor 1e065ba17f Fix and simplify the M17 receiver. 2021-03-14 17:53:28 +00:00
Jonathan Naylor 1df7d7a7fc Change the FM serial block size to 80. 2021-03-07 19:01:46 +00:00
Jonathan Naylor 7e919b12f7 Clean up the M17 synchronisation logic. 2021-01-02 12:24:11 +00:00
Jonathan Naylor bada4d9285 Add M17 packet mode support. 2021-01-01 13:17:02 +00:00
Jonathan Naylor 9ae4a5376d Merge branch 'master' into M17_AX25_FM 2021-01-01 13:01:56 +00:00
Jonathan Naylor 8038ce9c9c Merge pull request #308 from shawnchain/drcc_dvm_hhp_board_support
Add DRCC_DVM_HHP446 board support
2021-01-01 12:32:01 +00:00
Shawn Chain 842dcdb5c5 Add DRCC_DVM_HHP446 board support 2021-01-01 19:48:07 +08:00
Jonathan Naylor f7ead5cc0e Update the M17 sync vectors. 2020-12-26 12:42:16 +00:00
Jonathan Naylor b155597693 Merge branch 'master' into M17_AX25_FM 2020-12-14 09:53:38 +00:00
Jonathan Naylor 7148cf9f7d Add I2C support. 2020-12-14 09:46:53 +00:00
Jonathan Naylor 9440b43114 Simplify the D-Star fast data support. 2020-12-14 09:45:53 +00:00
Jonathan Naylor c06a83660f Merge pull request #306 from timclassic/dstar-match-full-last-data-frame
Detect full 48 bits of last data frame in a D-Star transmission
2020-12-14 09:37:05 +00:00
Tim Stewart 657e71238d Detect full 48 bits of last data frame in a transmission
While testing new support for DV Fast Data, I ran across a particular
image that reliably generated a bit sequence that the MDMVM firmware
interpreted as an end-of-transmission.  I dug a bit and discovered
that MMDVM only matches on 32 bits of the last data frame instead of
the full 48 bits.

See http://www.arrl.org/files/file/D-STAR.pdf section 2.1.2, item (6)
for details.
2020-12-05 13:37:06 -05:00
Jonathan Naylor 510d433906 Merge pull request #305 from dg0tm/M17_AX25_FM
Fixing Arduino Unique Identifier byte order
2020-11-28 15:27:16 +00:00
Christoph Kottke ff39a9031b Fixing Arduino Unique Identifier byte order 2020-11-28 16:25:08 +01:00
Jonathan Naylor 4f3aa8b7e1 Merge pull request #304 from dg0tm/M17_AX25_FM
Fixing Arduino UUID support
2020-11-28 12:13:35 +00:00
Christoph Kottke a35b8f929a Fixing Arduino UUID support 2020-11-28 08:51:58 +01:00
Jonathan Naylor 6d0335b357 Update for latest M17 specification. 2020-11-26 10:03:54 +00:00
Jonathan Naylor 54f4dcabf0 Increase serial speed to 460800. 2020-11-24 16:22:14 +00:00
Jonathan Naylor 19e2ccf150 Bump the version date. 2020-11-20 10:36:45 +00:00
Jonathan Naylor 0c4f49fa68 Add FM LED pin definition for the Repeater Builder V4 board. 2020-11-20 10:35:19 +00:00
Jonathan Naylor 98ebefe84b Update module pointers. 2020-11-20 10:31:11 +00:00
Jonathan Naylor 029e7eef4a Fix bugs. 2020-11-18 20:35:07 +00:00
Jonathan Naylor ca4fff2ba6 Remove unused I2C code and fix buffer handling bugs. 2020-11-17 10:36:00 +00:00
Jonathan Naylor 23ba73cabd Disable I2C in M17_AX25_FM. 2020-11-13 15:22:35 +00:00
Jonathan Naylor 519af80ac4 Add the beginnings of I2C support. 2020-11-13 15:20:54 +00:00
Jonathan Naylor c5b542f438 Allow serial data to be sent back to the host. 2020-11-13 12:09:10 +00:00
Jonathan Naylor 3503e0cc2a Merge branch 'master' into M17_AX25_FM 2020-11-12 09:15:40 +00:00
Jonathan Naylor 955578789d Make the M17 receiver less sensitive to noise. 2020-11-11 18:30:49 +00:00
Andy CA6JAU 061e10e395 Fixing deploy-pi and deploy-pi-f7 (M0VSE advice) 2020-11-11 15:23:14 -03:00
Jonathan Naylor fa9040fdf0 Fix compile issue for the serial repeater. 2020-11-11 17:14:05 +00:00
Jonathan Naylor 8240225371 Set the Config.h defaults correctly for the ZUM v0.9 board. 2020-11-11 17:11:22 +00:00
Jonathan Naylor f2c7c19444 Strip the version out of SerialPort.cpp 2020-11-09 17:29:55 +00:00
Jonathan Naylor 2e5f174cdd Add the modem capabilities data to the version message. 2020-11-09 16:22:44 +00:00
Jonathan Naylor d144ce6f1c Small changes to the serial protocol. 2020-11-09 14:23:43 +00:00
Jonathan Naylor 31744a237a Use the D-Star correlator receiver. 2020-11-09 11:50:02 +00:00
Jonathan Naylor 46c0958704 Add the boxcar filter as an option for NXDN. 2020-11-09 11:25:03 +00:00
Jonathan Naylor 99d2a0d822 Add UDID support. 2020-11-09 10:23:57 +00:00
Jonathan Naylor 81518bf74c Make AX.25, DMR, P25, NXDN and FM selectable at compile time. 2020-11-08 22:23:27 +00:00
Jonathan Naylor dd5a465a39 Make D-Star, System Fusion, M17, and POCSAG optional. 2020-11-08 21:28:26 +00:00
Jonathan Naylor a345586ee9 Update the protocol version. 2020-11-06 15:14:02 +00:00
Jonathan Naylor 55c89a4413 Merge branch 'AX25_FM' into M17_AX25_FM 2020-11-06 15:06:00 +00:00
Jonathan Naylor 60f87072ba Rescale the TX filter for M17. 2020-10-15 09:40:35 +01:00
Jonathan Naylor f2d2033733 Add the sync and RRC 0.5 data and code. 2020-10-14 13:29:23 +01:00
Jonathan Naylor 0334b5a791 Handle the M17 mode LED pins(-ish) 2020-10-14 11:55:31 +01:00
Jonathan Naylor a62fd814ae Begin M17 support. 2020-10-14 10:52:30 +01:00
Jonathan Naylor 02000c8049 Merge branch 'master' into AX25_FM 2020-09-01 13:27:57 +01:00
Jonathan Naylor 2509ab5ba1 Fix the self-test LEDs. 2020-09-01 13:27:29 +01:00
Jonathan Naylor 2de9e4d533 Merge branch 'master' into AX25_FM 2020-09-01 09:59:31 +01:00
Jonathan Naylor fda1e3dcf4 More LED fixes. 2020-09-01 09:57:49 +01:00
Jonathan Naylor cb3ed795d0 Merge branch 'master' into AX25_FM 2020-08-31 16:09:44 +01:00
Jonathan Naylor 632ddda68b Change the handling of the mode LEDs. 2020-08-31 16:06:59 +01:00
Jonathan Naylor b6093406ad Fix missing AX25 class definition. 2020-08-11 16:39:19 +01:00
Jonathan Naylor 8d9b49bdb0 Merge pull request #297 from F4FXL/AX25_FM
Add some delay to squelch
2020-08-05 22:16:37 +01:00
Geoffrey Merck 625ec93af8 Remove unused variable 2020-08-05 21:17:05 +02:00
Geoffrey Merck b2111553c6 Correct comment 2020-08-05 21:15:03 +02:00
Geoffrey Merck 252d54a484 Add some delay to squelch 2020-08-05 21:11:32 +02:00
Jonathan Naylor 1ad9799123 Merge branch 'AX25' into AX25_FM 2020-08-03 13:09:15 +01:00
Jonathan Naylor 6d67b9f104 Merge branch 'master' into AX25 2020-08-03 13:08:48 +01:00
Jonathan Naylor fb85505433 Merge pull request #296 from msraya/patch-1
YSF pictures can go through modem
2020-08-03 08:43:11 +01:00
Manuel Sánchez Raya 823b91c97d Update YSFRX.cpp
Lower MAX_SYNC_FRAMES to 2, so decoder can recover and Yaesu pictures can pass through the modem without problem.
2020-08-03 09:17:07 +02:00
Jonathan Naylor 2a001f491d Simplify the CTCSS and Noise Squelch decoders and logic. 2020-07-31 09:20:55 +01:00
Jonathan Naylor b5ba384495 Fix a couple of minor bugs. 2020-07-28 14:24:51 +01:00
Jonathan Naylor d8f138066e Add an experimental noise squelch. 2020-07-28 13:55:50 +01:00
Jonathan Naylor 6964251122 Merge branch 'AX25' into AX25_FM 2020-07-28 12:40:42 +01:00
Jonathan Naylor 0fca178bd7 Merge branch 'master' into AX25 2020-07-28 12:37:07 +01:00
Jonathan Naylor a60ecb3e57 Merge pull request #295 from n0mjs710/master
Added pin definition for FM mode LED (WA0EDA Boards)
2020-07-21 16:21:08 +01:00
Cort Buffington a2978d9e91 Removed a local change to not contaminate the repo 2020-07-21 08:27:02 -05:00
Cort Buffington e304f5cce2 Added pin assignment for FM mode LED (WA0EDA) 2020-07-21 08:19:18 -05:00
Jonathan Naylor 99a7df7c13 Merge pull request #294 from n0mjs710/master
Add support for WA0EDA MTR2000 & MASTR III boards
2020-07-21 06:08:08 +01:00
Cort Buffington 6dfe1a9271 Add support for WA0EDA MTR2000 & MASTR3 boards 2020-07-20 17:11:29 -05:00
Jonathan Naylor 9ff59570c7 Merge branch 'AX25' into AX25_FM 2020-07-15 10:42:43 +01:00
Jonathan Naylor d5e9b5a315 Merge branch 'master' into AX25 2020-07-15 08:49:40 +01:00
Jonathan Naylor 1ac0628c1c Improve the code efficiency slightly. 2020-07-14 14:54:47 +01:00
Jonathan Naylor dc41fd83d2 Test the use of a reverse burst at the end of a transmission. 2020-07-14 12:20:42 +01:00
Jonathan Naylor 20013e3adc Make Use COS As Lockout a run-time parameter and allow for different access modes. 2020-07-13 17:13:01 +01:00
Jonathan Naylor 5960fb97f3 Merge branch 'AX25' into AX25_FM 2020-07-12 15:28:00 +01:00
Jonathan Naylor 8f8dc92a14 Merge branch 'master' into AX25 2020-07-12 15:24:50 +01:00
Jonathan Naylor ccdbe126e0 Fix the timeout tones. 2020-07-12 15:22:35 +01:00
Jonathan Naylor d29a0bc3a6 Merge branch 'AX25' into AX25_FM 2020-07-12 10:48:43 +01:00
Jonathan Naylor 4ff057069b Merge branch 'master' into AX25 2020-07-12 10:48:20 +01:00
Jonathan Naylor f8d8f85841 Small simplification of the timeout tones. 2020-07-12 10:47:43 +01:00
Jonathan Naylor ad77fd60fd Remove KerchunkTX. 2020-07-07 17:57:31 +01:00
Jonathan Naylor aab8f5469f Add timeouts to the FM simplex state machine. 2020-07-06 10:56:35 +01:00
Jonathan Naylor f1d6a8b36e Add DCD LED control. 2020-07-06 10:03:48 +01:00
Jonathan Naylor 843997ccad Merge pull request #293 from F4FXL/AX25_FM
Fix wrong frame type
2020-07-06 06:52:50 +01:00
Geoffrey Merck d5f2d1c382 Fix wrong frame type 2020-07-04 12:15:33 +02:00
Jonathan Naylor c99f50575d Add a simpe simplex FM controller state machine. 2020-07-01 13:02:14 +01:00
Jonathan Naylor 29c8cf9414 Add AX.25 Slot Time and P-Persist processing for simplex work. 2020-07-01 12:33:08 +01:00
Jonathan Naylor 2c6e2c2a11 Remove unneeded zeroes from the band pass FIR filter. 2020-06-30 17:09:09 +01:00
Jonathan Naylor 8d10555dc9 Reduce the low pass filter a little. 2020-06-30 15:35:58 +01:00
Jonathan Naylor 14d5098018 Rename FMDownsampler to FMDownSampler. 2020-06-30 12:44:02 +01:00
Jonathan Naylor 52a351d0f1 Slight tweak to the mark and space. 2020-06-29 16:11:56 +01:00
Jonathan Naylor 43f84ae968 Simplify the pre-emphasis code for AX.25. 2020-06-29 15:59:46 +01:00
Jonathan Naylor a73376671c Fix preamble and NRZI. 2020-06-28 15:27:58 +01:00
Jonathan Naylor 759efd1da4 Merge pull request #292 from F4FXL/AX25_FM
correct preamble and NRZI
2020-06-28 15:25:45 +01:00
Geoffrey Merck ea0c1953cc correct preamble and NRZI 2020-06-28 11:22:10 +02:00
Jonathan Naylor a29cb23a75 Remove TX Twist. 2020-06-27 22:55:16 +01:00
Jonathan Naylor bb66c72ef3 Merge branch 'FM_Ext' into AX25_FM 2020-06-25 10:41:48 +01:00
Jonathan Naylor 2da28ede64 Increase the maximum AX25 frame size. 2020-06-24 13:14:10 +01:00
Jonathan Naylor a7ac55795d Fix obvious AX25 TX data bug. 2020-06-24 12:46:27 +01:00
Jonathan Naylor 835ef46aef Bump the version date. 2020-06-24 11:16:02 +01:00
Jonathan Naylor 3de10fe98b First version of the AX25 TX functionality. 2020-06-24 11:14:02 +01:00
Jonathan Naylor 7ad70d04a4 Add a dummy AX25 transmit function and make AX25 RX changes. 2020-06-23 10:34:19 +01:00
Jonathan Naylor e210062365 Add the twist processing to the AX25 RX. 2020-06-21 21:40:40 +01:00
Jonathan Naylor f9fcdc5292 Begin adding AX25 TX. 2020-06-21 19:16:02 +01:00
Jonathan Naylor 0ea732780d Implement Kerchunk TX option. 2020-06-20 21:03:11 +01:00
Jonathan Naylor 33d922b8c2 Handle the incoming data offset correctly. 2020-06-19 13:27:45 +01:00
Jonathan Naylor 114c2bcb15 Handle extended packet lengths. 2020-06-19 13:16:47 +01:00
Jonathan Naylor 6dbda2795a Miscalculated the address length. 2020-06-17 22:40:09 +01:00
Jonathan Naylor 6a80d0ec09 Fix minimum packet size. 2020-06-17 22:33:13 +01:00
Jonathan Naylor 0e8f20e1cc Bump the version date. 2020-06-17 16:02:15 +01:00
Jonathan Naylor af11be16dc First woring AX.25 decoder (in simulation). 2020-06-17 15:28:41 +01:00
Jonathan Naylor e332dbba8e Add the correct CCITT checksum table. 2020-06-11 12:59:30 +01:00
Jonathan Naylor 746d915bf9 Rescale one of the filters for the MMDVM sample rate. 2020-06-11 12:14:36 +01:00
Jonathan Naylor c896cf823e Add mobilinkd copyright. 2020-06-11 10:04:09 +01:00
Jonathan Naylor c2959466fd Code complete, but untested. 2020-06-11 10:02:11 +01:00
Jonathan Naylor 121c76f3d8 More filtering added. 2020-06-10 16:38:10 +01:00
Jonathan Naylor 22cb16f831 Add more frame processing. 2020-06-10 16:09:45 +01:00
Jonathan Naylor 57e18e337f Add the seperate AX25Frame class. 2020-06-10 13:53:18 +01:00
Jonathan Naylor e1d1ac4a4d More work on adding AX.25 decoding. 2020-06-10 12:07:04 +01:00
Jonathan Naylor 64fe59382f Start on the actual AX.25 demodulator. 2020-06-09 14:57:06 +01:00
Jonathan Naylor a2e2853241 Begin AX.25 development. 2020-06-08 15:02:12 +01:00
Jonathan Naylor 598d32287d Add alternate FM LEDs for the POG board. 2020-06-01 16:55:13 +01:00
Jonathan Naylor 53d8cfa360 Revert IOSTM_CMSIS.cpp to 5c9abf2 2020-06-01 16:51:59 +01:00
Jonathan Naylor 1309ad9326 Merge pull request #286 from F4FXL/FM_Ext
Add forgotten file for large frame handling
2020-06-01 09:55:25 +01:00
Geoffrey Merck 411d439d78 Add forgotten file for large frame handling 2020-06-01 10:29:05 +02:00
Jonathan Naylor ec9428d63e Merge pull request #285 from F4FXL/FM_Ext
Habdle full frame length
2020-05-31 21:14:35 +01:00
Geoffrey Merck 2a4b28c35e return space as number of bytes 2020-05-31 22:11:28 +02:00
Geoffrey Merck 4f060c0047 Esnure frame size is 84 samples, correctly report space as number of frames 2020-05-31 21:50:06 +02:00
Jonathan Naylor 1ed3a4c9d5 Merge pull request #284 from F4FXL/FM_Ext
Avoid Buffer underruns
2020-05-31 11:26:27 +01:00
Geoffrey Merck f414288c9b Update speed comments 2020-05-31 11:45:17 +02:00
Geoffrey Merck 72cd2ce03e Ensure we have at least 75ms of audio before transmitting 2020-05-30 20:05:34 +02:00
Jonathan Naylor 9137af8e3f Merge pull request #281 from F4FXL/FM_Ext
Speed improvements and fixes for FM Ext
2020-05-24 07:56:45 +01:00
Geoffrey Merck cdfe3d0ec9 Clean up includes 2020-05-24 08:20:03 +02:00
Geoffrey Merck 4dfab06a50 Revert to GPIO_Fast_Speed 2020-05-24 08:11:32 +02:00
Geoffrey Merck 47649171fc Fix sample unpacking 2020-05-24 08:01:59 +02:00
Geoffrey Merck 0bd79fa440 Fix sample packing 2020-05-24 07:45:50 +02:00
Geoffrey Merck 26d055a67b Update filter generation script 2020-05-24 07:44:38 +02:00
Geoffrey Merck 5db1adb5ea #defines for serial speeds 2020-05-23 21:01:21 +02:00
Geoffrey Merck f86b5435bb Remove unneeded include 2020-05-23 15:30:00 +02:00
Geoffrey Merck 31f0e24588 Make serial speed a compile option 2020-05-23 08:57:30 +02:00
Geoffrey Merck 04d0b15545 Remove UART habndling Copy/Paste code 2020-05-23 08:28:23 +02:00
Geoffrey Merck f14222e77d Make sure buffer is continuously filled 2020-05-23 08:25:51 +02:00
Jonathan Naylor 7fabddd7f1 Update the README file. 2020-05-21 11:11:19 +01:00
Jonathan Naylor 5039dfbe68 Merge pull request #280 from F4FXL/FM_Ext
Fix Callsign at end and simplify Samples
2020-05-20 22:19:36 +01:00
Jonathan Naylor f9f81b9b8e Try and make the closing callsign appear.
(cherry picked from commit 063b21f999)
2020-05-20 23:11:22 +02:00
Geoffrey Merck 3cc5d67696 check acks 2020-05-20 22:51:22 +02:00
Geoffrey Merck 3f960f9fc5 Fix Callsignatend and simplify Samples 2020-05-20 22:30:55 +02:00
Jonathan Naylor 489853f200 Fix the TX Hang. 2020-05-20 15:27:16 +01:00
Jonathan Naylor 2cf2ce4dfa Fix the TX Hang handling. 2020-05-20 15:16:12 +01:00
Jonathan Naylor 96e1a765f9 Merge pull request #279 from F4FXL/FM_Ext
Remove SerialUSB for Arduino and remove uneeded class
2020-05-20 10:17:33 +01:00
Geoffrey Merck 04982c25c0 Remove SerialUSB for Arduino 2020-05-20 11:06:02 +02:00
Geoffrey Merck a3ffa9ed36 Remove no longer needed SerialRB class 2020-05-20 08:08:22 +02:00
Jonathan Naylor e7a22482db Set the COS LED on incoming RF transmissions. 2020-05-19 13:45:17 +01:00
Jonathan Naylor 5f29808b80 Set the COS LED correctly. 2020-05-19 12:09:44 +01:00
Jonathan Naylor 063b21f999 Try and make the closing callsign appear. 2020-05-18 11:09:56 +01:00
Jonathan Naylor 89b8641955 Merge pull request #278 from shawnchain/drcc_serial_bugfix
Drcc serial bugfix
2020-05-18 06:34:09 +01:00
Shawn Chain 6397c720e8 Generate bin map file for analysis 2020-05-18 12:19:22 +08:00
Shawn Chain 50c1e5aa3f update pin defs for drcc/nqf board 2020-05-18 12:18:44 +08:00
Shawn Chain 970d02773f Fix serial no write bug on DRCC board 2020-05-18 12:18:17 +08:00
Jonathan Naylor 625749a546 Fixed up the use of the writeFMEOT method. 2020-05-16 13:15:21 +01:00
Jonathan Naylor d75042dc4c Merge pull request #276 from F4FXL/FM_Ext
Add FM EOT
2020-05-16 12:57:33 +01:00
Geoffrey Merck 296ac88842 Correct length 2020-05-16 12:08:26 +02:00
Geoffrey Merck 48e863d1d0 Sent EOT on rf timeout 2020-05-15 21:19:26 +02:00
Geoffrey Merck 7b915f9cac Only send EOT when EXT is enabled 2020-05-15 21:06:16 +02:00
Geoffrey Merck e330c9f52a Fix typo 2020-05-15 21:05:57 +02:00
Geoffrey Merck 9470b1d6d3 Merge remote-tracking branch 'upstream/FM_Ext' into FM_Ext 2020-05-15 20:21:12 +02:00
Geoffrey Merck 388620b182 Add FM EOT 2020-05-15 18:53:34 +02:00
Jonathan Naylor 72e45177f3 Merge pull request #275 from F4FXL/FM_Ext
Minor fix, reduce memory usage
2020-05-14 22:19:27 +01:00
Geoffrey Merck 90b82621f2 Merge remote-tracking branch 'upstream/FM_Ext' into FM_Ext 2020-05-14 22:02:47 +02:00
Jonathan Naylor ff375abb0e Hold off the mode change until the ack and callsign have been
transmitted.
2020-05-14 12:10:37 +01:00
Geoffrey Merck cfcb7ed852 Really fix TX Buffer ovrflows,, reduce delay buffer memory footprint 2020-05-14 09:10:11 +02:00
Geoffrey Merck b245be464f Fix txbuffer overflows and bring back elegant while loop 2020-05-13 22:57:42 +02:00
Jonathan Naylor 139003d4c7 Merge pull request #274 from F4FXL/FM_Ext
Add define to use native USB port on Arduino
2020-05-13 20:19:41 +01:00
Geoffrey Merck c47eacd010 Add define to use native port on Arduino 2020-05-13 21:02:19 +02:00
Jonathan Naylor 6b01f12602 Merge branch 'FM' into FM_Ext 2020-05-13 12:03:12 +01:00
Jonathan Naylor 7169836621 Merge branch 'master' into FM 2020-05-13 12:01:19 +01:00
Jonathan Naylor c84d227242 Merge branch 'master' into TXHang 2020-05-13 12:00:23 +01:00
Jonathan Naylor 4f93c6022c Merge pull request #273 from F4FXL/FM_Ext
Send unsigned data and simplify downdampling code
2020-05-13 11:44:37 +01:00
Geoffrey Merck 81f6b6be53 Send usigned data and simplify downdamplign code 2020-05-13 12:42:14 +02:00
Jonathan Naylor fa9f89700f Merge pull request #272 from F4FXL/FM_Ext
Fix compiler warnings
2020-05-13 11:10:04 +01:00
Geoffrey Merck 9023b6ae13 Correct indentation 2020-05-13 12:03:52 +02:00
Geoffrey Merck df23e15c91 Fix compilation warnings 2020-05-13 11:52:59 +02:00
Jonathan Naylor 51e5e7b851 Merge branch 'FM' into FM_Ext 2020-05-13 10:31:17 +01:00
Jonathan Naylor 8e52bdcc5c Merge branch 'master' into FM 2020-05-13 10:30:46 +01:00
Jonathan Naylor 1332c6544b Merge pull request #271 from shawnchain/fix_led_alternate_macro_names
Fix led alternate macro names
2020-05-13 09:36:05 +01:00
Shawn Chain 703ed2628d Init FM led/mode GPIO pin 2020-05-13 16:28:05 +08:00
Shawn Chain f3943a7888 fix wrong macro name for LED/MODE pin 2020-05-13 16:27:12 +08:00
Jonathan Naylor 737454281a Merge pull request #270 from shawnchain/add_nqf_board_pin_defs_header
pin header file for nqf board
2020-05-13 08:43:19 +01:00
Shawn Chain 1aef42bb21 add missing header files for nqf board 2020-05-13 15:28:08 +08:00
Jonathan Naylor 9550299e4d Merge pull request #268 from shawnchain/drcc_dvm_nqf_board_support
Supports drcc_dvm_nqf board
2020-05-13 07:46:58 +01:00
Jonathan Naylor 056dd908b3 Merge pull request #269 from F4FXL/FM_Ext
Fix crash when writing to serial, Tighten handling of incomign data
2020-05-13 07:41:39 +01:00
Geoffrey Merck 62f239ccc9 Fix modem crash while writing to serial, Split IO write and serial write to 2 separate loops. 2020-05-13 08:31:59 +02:00
Shawn Chain f8879e1f25 Supports drcc_dvm_nqf board 2020-05-13 13:51:02 +08:00
Geoffrey Merck 994226e4b1 Tighten incoming data, Add FM UpSampler 2020-05-12 22:06:26 +02:00
Jonathan Naylor 2cc6c1f68f Merge pull request #267 from F4FXL/FM_Ext
Write Audio to serial
2020-05-12 19:00:09 +01:00
Geoffrey Merck 8e8cf35b19 Merge remote-tracking branch 'upstream/FM_Ext' into FM_Ext 2020-05-12 17:55:41 +02:00
Geoffrey Merck 66de35b6d8 Move downsamplig call back to samples 2020-05-12 17:55:24 +02:00
Jonathan Naylor 43e00bbe1d Merge pull request #266 from shawnchain/io_pins_def_for_each_board_type
Extract the IO pins defs from IOSTM.cpp to separate files
2020-05-12 16:28:04 +01:00
Shawn Chain f31b682625 Extract the IO pins defs from IOSTM.cpp to separate files 2020-05-12 23:21:05 +08:00
Jonathan Naylor 7dc420c8ff Add the FM controller status to the FM Status message. 2020-05-12 15:58:54 +01:00
Jonathan Naylor df0a9ebe72 Merge branch 'FM' into FM_Ext 2020-05-12 15:51:41 +01:00
Jonathan Naylor 66feb9d50b Merge branch 'master' into FM 2020-05-12 15:48:44 +01:00
Jonathan Naylor 0b14b0b73f Merge pull request #265 from shawnchain/mode_led_fm_fix
fix compile error if no MODE_LEDS defined
2020-05-12 15:48:22 +01:00
Shawn Chain 50706c6f09 fix compile error if no MODE_LEDS defined 2020-05-12 22:44:15 +08:00
Jonathan Naylor e957f0154e Merge pull request #264 from F4FXL/FM_Ext
Fix Silence
2020-05-12 15:25:27 +01:00
Geoffrey Merck b10c72fd78 Merge branch 'FM_Ext' of https://github.com/F4FXL/MMDVM into FM_Ext 2020-05-12 16:22:54 +02:00
Geoffrey Merck 496afcb40e Fix silence 2020-05-12 16:21:24 +02:00
Geoffrey Merck 9467b10e5c Fix silence 2020-05-12 16:19:19 +02:00
Jonathan Naylor 13c5f7b0b4 Merge pull request #263 from F4FXL/FM_Ext
Fix FM not transmitting, remove silence for testing
2020-05-12 15:07:17 +01:00
Jonathan Naylor 435544f7a1 Add CTCSS hysteresis. 2020-05-12 13:55:30 +01:00
Geoffrey Merck b64712f657 Restore silence 2020-05-12 14:45:03 +02:00
Geoffrey Merck d23c0900c1 Fix compilation 2020-05-12 14:18:27 +02:00
Geoffrey Merck a0a3080da2 Make sure downsampler always buffers 22 samples at a time 2020-05-12 14:15:04 +02:00
Geoffrey Merck 0fad84b46d Remove silence 2020-05-12 09:29:01 +02:00
Geoffrey Merck 1b40044a23 Re-enable write audio to serial 2020-05-12 09:28:24 +02:00
Geoffrey Merck a671263398 Merge remote-tracking branch 'upstream/FM_Ext' into FM_Ext 2020-05-12 08:37:10 +02:00
Geoffrey Merck ca1cc7096a Fix modem not goign on transmit, still some cleansing to be done 2020-05-12 08:36:38 +02:00
Geoffrey Merck a5aabd8fac Update TX ON/OFF debug info 2020-05-12 08:35:48 +02:00
Jonathan Naylor 6d0e57ea88 Merge pull request #262 from F4FXL/FM_Ext
Still some work in progress to fix no TX
2020-05-11 23:39:05 +01:00
Geoffrey Merck 1d04c1e903 Typo 2020-05-11 22:35:46 +02:00
Geoffrey Merck 042c26b3bb Trying to fix no tx, WIP 2020-05-11 22:32:24 +02:00
Geoffrey Merck b4a125a759 Add debug info TX switching 2020-05-11 22:31:50 +02:00
Geoffrey Merck 8ecf80ff8f Merge branch 'FM_Ext' of https://github.com/F4FXL/MMDVM into FM_Ext 2020-05-11 19:02:24 +02:00
Geoffrey Merck 6786b9b6b1 Temporary revert to previous code 2020-05-11 19:02:08 +02:00
Geoffrey Merck 86ffc69b30 Add getData 2020-05-11 19:02:08 +02:00
Geoffrey Merck 5d4df6ffd9 Write larger chunks of data to IO 2020-05-11 19:02:08 +02:00
Geoffrey Merck eac2aa4ac1 Write larger chunks of FM audio to the serial port 2020-05-11 19:02:08 +02:00
Geoffrey Merck 8cbd52aa72 Update to SAM 1.6.12 2020-05-11 19:02:08 +02:00
Jonathan Naylor 99b853a976 Stop the status timer when leaving TX. 2020-05-11 15:00:53 +01:00
Jonathan Naylor 15bc1a4027 Merge branch 'FM' into FM_Ext 2020-05-11 13:42:14 +01:00
Jonathan Naylor 75e32e1b71 Merge branch 'master' into FM 2020-05-11 13:41:37 +01:00
Jonathan Naylor 7ebc4044f9 Remove Coocox file. 2020-05-11 13:41:10 +01:00
Jonathan Naylor 1836ba928e Merge branch 'FM' into FM_Ext 2020-05-11 13:36:38 +01:00
Jonathan Naylor c54c13c146 Merge branch 'master' into FM 2020-05-11 13:33:49 +01:00
phl0 17a3743cd8 Add GPIO and LEDs for FM mode 2020-05-11 14:27:23 +02:00
Jonathan Naylor 4a5a260c28 Perform FM mode changing in a more conventional manner. 2020-05-11 13:15:13 +01:00
Geoffrey Merck 4bcc1e88c4 Update to SAM 1.6.12 2020-05-11 07:53:21 +02:00
Jonathan Naylor 4cba5931f4 Loosen the conditions for returning to STATE_IDLE 2020-05-10 21:29:01 +01:00
Jonathan Naylor 89458a2c93 Release to STATE_IDLE under simpler conditions. 2020-05-10 21:25:10 +01:00
Jonathan Naylor c91a42f53d Merge pull request #260 from F4FXL/FM_Ext
Write audio to serial port, blank too ext high audio, really ignore ext audio when ext is disabled
2020-05-10 21:04:22 +01:00
Geoffrey Merck 470a070d96 Merge remote-tracking branch 'upstream/FM_Ext' into FM_Ext 2020-05-10 21:59:57 +02:00
Geoffrey Merck 36537c981c Write audio to serial port, blank to high audio, really ignore ext aduio when ext is disabled 2020-05-10 21:59:14 +02:00
Jonathan Naylor c85978a4e3 Rescale the FM calibration level. 2020-05-10 17:33:50 +01:00
Jonathan Naylor d0062a55f8 Rescale the FM calibration output. 2020-05-10 17:31:21 +01:00
Jonathan Naylor 66ea3ad0d1 Only use the CTCSS delay when not using COS. 2020-05-10 17:15:54 +01:00
Jonathan Naylor 3ad443dc2a Remove the delay when using COS. 2020-05-10 17:13:10 +01:00
Jonathan Naylor da16ee277c Merge pull request #258 from F4FXL/FM_Ext
Fix repeater stuck on transmit
2020-05-10 17:06:57 +01:00
Jonathan Naylor 85acdc7121 Merge pull request #259 from F4FXL/FM
Fix stuck on TX
2020-05-10 17:06:26 +01:00
Geoffrey Merck a2518e99f2 Fix stuck on TX 2020-05-10 17:29:17 +02:00
Geoffrey Merck 0f51ddd0bd Fix repeater stuck on transmit 2020-05-10 17:18:59 +02:00
Jonathan Naylor aaa72e769f Merge pull request #257 from F4FXL/FM_Ext
Only use one RingBuffer plus some bug fixes
2020-05-10 08:14:08 +01:00
Geoffrey Merck 0e8fdb381a Fix State machine not changing state 2020-05-10 09:07:21 +02:00
Geoffrey Merck 0b31c40c2b Made Get volatile 2020-05-10 08:01:10 +02:00
Geoffrey Merck 2b3df4e901 Merge remote-tracking branch 'upstream/FM_Ext' into FM_Ext 2020-05-10 07:01:21 +02:00
Geoffrey Merck 807f01ba72 Get rid of annoying PI warning 2020-05-10 07:00:58 +02:00
Geoffrey Merck 03f18451f7 Remove CSerialBuffer, use CRingBuffer 2020-05-10 06:50:35 +02:00
Geoffrey Merck 16c3d418eb Buffer no longer volatile, not needed 2020-05-10 00:03:32 +02:00
Geoffrey Merck 55df5fe04c Remove useless stuff 2020-05-10 00:03:05 +02:00
Geoffrey Merck b0ba3b5dd8 SerialRB now inherits from RingBuffer 2020-05-09 19:57:40 +02:00
Geoffrey Merck 05d21c0a14 TX Buffer now using Templae RB 2020-05-09 17:44:44 +02:00
Geoffrey Merck 26a703c68c IO RXbuffer now uses template RingBuffer 2020-05-09 17:35:38 +02:00
Geoffrey Merck 6c3dd265ab No more need to specify each types for ringBuffer 2020-05-09 14:14:53 +02:00
Jonathan Naylor c04e207821 Insert the missing silence. 2020-05-09 13:10:02 +01:00
Jonathan Naylor 67e0bf02e2 Merge branch 'FM' into FM_Ext 2020-05-09 13:06:32 +01:00
Jonathan Naylor 3bb7cde322 Add input audio delay to match the CTCSS decoder results. 2020-05-09 13:01:02 +01:00
Jonathan Naylor fa29a27695 Ensure all output audio is flushed before leaving FM state. 2020-05-09 12:53:50 +01:00
Geoffrey Merck 7302dc8bd7 Replace RSSI RB with template RB 2020-05-09 11:08:18 +02:00
Jonathan Naylor bb7383a301 Merge pull request #256 from F4FXL/FM_Ext
Add missing files
2020-05-09 10:03:04 +01:00
Geoffrey Merck 61a69d8536 Add missing file 2020-05-09 11:01:28 +02:00
Jonathan Naylor 5a11fcea5b Merge pull request #255 from F4FXL/FM_Ext
Add RingBuffer Template
2020-05-09 09:59:57 +01:00
Geoffrey Merck 05775f0bfa Add RingBuffer Template 2020-05-09 10:57:16 +02:00
Jonathan Naylor 973a1391d7 Merge pull request #254 from F4FXL/FM_Ext
Handle Incoming external audio
2020-05-09 07:36:32 +01:00
Geoffrey Merck 5d45649096 Simplify code 2020-05-09 08:29:31 +02:00
Geoffrey Merck e91c4417cb Handle incoming audio 2020-05-09 08:23:02 +02:00
Geoffrey Merck ff3e6feeb6 Use more explicit names 2020-05-09 08:00:24 +02:00
Geoffrey Merck 0e2a83bc7b Add incoming network data buffer 2020-05-09 07:57:45 +02:00
Jonathan Naylor c84dbd02e5 Merge pull request #253 from F4FXL/FM_Ext
FM into FM_Ext
2020-05-08 21:07:46 +01:00
Geoffrey Merck c0aad5effa Add mising initilizer 2020-05-08 21:47:03 +02:00
Geoffrey Merck e0234dfc00 Merge remote-tracking branch 'upstream/FM' into FM_Ext 2020-05-08 21:39:18 +02:00
Jonathan Naylor e30eb3adaf Reduce the output buffer loading. 2020-05-08 17:18:26 +01:00
Jonathan Naylor 7c9385beab Merge pull request #252 from F4FXL/FM_Ext
Use pointer/shift/masking for sample unpacking
2020-05-08 16:53:32 +01:00
Geoffrey Merck 4c6601d778 Merge branch 'FM_Ext' of https://github.com/F4FXL/MMDVM into FM_Ext 2020-05-08 17:43:43 +02:00
Geoffrey Merck e3a951b33b Use pointer/masking/shifting for sample unpacking 2020-05-08 17:43:05 +02:00
Geoffrey Merck 97192602d8 Use pointer/masking/shifting for sample unpacking 2020-05-08 17:41:12 +02:00
Jonathan Naylor 604957b3e2 Merge pull request #251 from F4FXL/FM_Ext
Remove Union for sample packing
2020-05-08 16:30:06 +01:00
Geoffrey Merck bb731e7890 Init pointer with null 2020-05-08 17:15:23 +02:00
Geoffrey Merck c81d13395b Use correct types 2020-05-08 17:13:29 +02:00
Jonathan Naylor 9b0fed975c Buffer output after adding some initial silence. 2020-05-08 15:48:03 +01:00
Geoffrey Merck 18bc0a75b8 Merge branch 'FM_Ext' of https://github.com/F4FXL/MMDVM into FM_Ext 2020-05-08 16:45:22 +02:00
Geoffrey Merck f1a43ee520 Remove union, use pointer tricks instead 2020-05-08 16:44:53 +02:00
Geoffrey Merck b73bca237d Remove union, use pointer tricks instead 2020-05-08 15:06:08 +02:00
Jonathan Naylor e7ff0d1898 Use const uint8_t instead of non-const. 2020-05-08 13:29:50 +01:00
Jonathan Naylor 880df2536d Add audio packing code. 2020-05-08 12:30:15 +01:00
Jonathan Naylor 09b6929100 Merge pull request #250 from F4FXL/FM_Ext
Merge FM into FM_Ext
2020-05-08 11:04:14 +01:00
Geoffrey Merck 9afcf3acc9 Merge remote-tracking branch 'upstream/FM' into FM_Ext 2020-05-08 12:00:36 +02:00
Jonathan Naylor 5ca9313db8 Merge pull request #248 from F4FXL/FM
Make the FM chain RX Level independant
2020-05-08 09:18:58 +01:00
Geoffrey Merck feff1ee2c7 remove emphasis 2020-05-08 09:04:28 +02:00
Geoffrey Merck 77e0deee76 Make whole FM chain RX level independant 2020-05-08 09:01:00 +02:00
Jonathan Naylor d7cd7096d0 Add the external audio state machine and the beginnings of the audio
processing.
2020-05-07 22:39:17 +01:00
Jonathan Naylor 5d1b66dde3 Add the missing functions. 2020-05-07 22:07:58 +01:00
Jonathan Naylor 96364dc189 Add the external audio parameters. 2020-05-07 22:01:48 +01:00
Jonathan Naylor a816818e3f Beginnings of external audio for the FM controller. 2020-05-07 16:17:00 +01:00
Jonathan Naylor 61ae1fc83a Add transmit hangs to NXDN and P25. 2020-05-06 17:42:46 +01:00
Jonathan Naylor eb9c0dfd93 Allow for the inversion of COS levels. 2020-05-06 11:34:04 +01:00
Jonathan Naylor 79a09e61fa Add the dot to the FM keyer. 2020-05-05 21:02:56 +01:00
Jonathan Naylor 9978a75651 Merge branch 'master' into FM 2020-05-05 21:01:15 +01:00
Jonathan Naylor bd16d13531 Add the dot to the CW Id. 2020-05-05 21:00:36 +01:00
Jonathan Naylor f00d729264 Merge pull request #246 from F4FXL/bugfix/STM32F1_POG
Bug Fixes for the STM32F1_POG and derivatives
2020-05-05 10:17:03 +01:00
Geoffrey Merck a4ddc2a060 Merge remote-tracking branch 'upstream/FM' into bugfix/STM32F1_POG 2020-05-05 11:02:27 +02:00
Geoffrey Merck a938c8b708 Reduce buffer size 2020-05-05 10:48:44 +02:00
Jonathan Naylor aa7a484c7a Allow the start callsign to occur when the kerchunk timer has latched. 2020-05-04 22:18:51 +01:00
Jonathan Naylor 915be8c279 Calculate the AckMinTime accurately. 2020-05-04 22:06:57 +01:00
Geoffrey Merck 87feadd451 Better LED management 2020-05-04 19:12:45 +02:00
Geoffrey Merck 419ab89ee9 Merge branch 'bugfix/STM32F1_POG' of https://github.com/F4FXL/MMDVM into bugfix/STM32F1_POG 2020-05-04 16:44:25 +02:00
Geoffrey Merck fcdb582893 Change FM LED Pin 2020-05-04 16:43:08 +02:00
Geoffrey Merck 5e85565208 Fix compile isue 2020-05-04 15:26:17 +02:00
Geoffrey Merck 2d876b8d8e Fix Fancy LED effect accessing unused ports 2020-05-03 15:36:10 +02:00
Jonathan Naylor 4feca3c5b7 Clock the timers seperately. 2020-05-03 13:08:33 +01:00
Jonathan Naylor f8e119c26b Set the modem state in SET_CONFIG. 2020-05-02 17:37:47 +01:00
Jonathan Naylor edddbedd4b Fix compilation issues. 2020-05-02 15:46:36 +01:00
Jonathan Naylor baa4f7aa4c Last minute tidy-ups. 2020-05-02 14:47:43 +01:00
Jonathan Naylor de3c257f79 Bump the version date. 2020-05-01 18:47:15 +01:00
Jonathan Naylor b027e1d1bf Merge pull request #243 from F4FXL/FM
Fix CTCSS value is different when using RXLevel 50 to 99
2020-05-01 17:04:05 +01:00
Geoffrey Merck 0a5c496a3a Fix CTCSS value is different when using RXLevel 50 to 99 2020-05-01 17:56:45 +02:00
Jonathan Naylor 5b32fecc0a Remove the pre- and de-emphasis and the downsampler. 2020-04-30 11:39:04 +01:00
Jonathan Naylor 92a4db9886 Merge pull request #242 from g4klx/revert-241-FM
Revert "Change emphasis time constant to 750µS"
2020-04-30 11:23:42 +01:00
Jonathan Naylor cc785e3225 Revert "Change emphasis time constant to 750µS" 2020-04-30 11:23:19 +01:00
Jonathan Naylor be0690e587 Merge pull request #241 from F4FXL/FM
Change emphasis time constant to 750µS
2020-04-30 09:38:24 +01:00
Geoffrey Merck 69e39e36b0 Change emphasis time constant to 750µS 2020-04-30 10:26:04 +02:00
Jonathan Naylor b2f33fd4d2 Bump the version date. 2020-04-29 21:51:12 +01:00
Jonathan Naylor 200199c5d4 Reduce the CPU load slightly. 2020-04-29 20:59:48 +01:00
Jonathan Naylor 1465d6f91d Merge pull request #240 from F4FXL/FM
Add resmaplign/packing and Pre and De emphasis
2020-04-29 20:45:02 +01:00
Geoffrey Merck 373aed13c8 Restore Passband 2020-04-29 20:43:01 +02:00
Geoffrey Merck b23620ede3 Add de and pre emphasis 2020-04-29 20:42:20 +02:00
Geoffrey Merck da87afc8d4 Move helper script to separate folder 2020-04-29 20:41:41 +02:00
Geoffrey Merck 626a280d27 Add filter chrachertitics comment 2020-04-29 18:24:15 +02:00
Geoffrey Merck 4b267c2e1e Move downsampling tap point 2020-04-28 22:35:06 +02:00
Geoffrey Merck cf18f95a92 Add Downsampling 2020-04-28 21:37:06 +02:00
Jonathan Naylor dac0f26e5d Rename RXBoost to RFAudioBoost. 2020-04-28 14:43:40 +01:00
Jonathan Naylor 13993891ec Merge pull request #239 from m0vse/FM
Change FM cal levels
2020-04-28 09:55:31 +01:00
m0vse 849c2a0f50 Change FM cal levels 2020-04-28 09:51:11 +01:00
Jonathan Naylor 172ac615a8 Rescale the output. 2020-04-27 14:59:33 +01:00
Jonathan Naylor 30031d8e95 Increase the output level. 2020-04-27 14:53:41 +01:00
Jonathan Naylor b2de5defa4 Tweak the values slightly. 2020-04-27 14:47:17 +01:00
Jonathan Naylor 177c7548ae Merge pull request #237 from m0vse/FM
Add FM Cal modes
2020-04-27 14:35:53 +01:00
m0vse b9bfc36e6f Remove commented code 2020-04-27 14:32:16 +01:00
m0vse 980c529107 Merge remote-tracking branch 'upstream/FM' into FM 2020-04-27 14:19:12 +01:00
m0vse 5156ca13b7 Add FM Cal modes 2020-04-27 14:18:42 +01:00
Jonathan Naylor d08a3690b0 Double the signal level to the CTCSS decoder. 2020-04-27 13:07:03 +01:00
Jonathan Naylor e8ed77241c Simplify the calculations. 2020-04-27 12:05:55 +01:00
Jonathan Naylor 82dcc44a2d Merge pull request #235 from F4FXL/FM
Move division to CTCSSRX, change sample unscaling to 1/rxLevel
2020-04-27 10:27:51 +01:00
Geoffrey Merck 93a8e63233 Remove m_rxLevel 2020-04-27 11:26:19 +02:00
Geoffrey Merck 4ffaa62855 Move division to CTCSSRX, change sample unscaling to 1/rxLevel 2020-04-27 11:16:06 +02:00
Jonathan Naylor f9530ee82a Pass the RX level to the FM controller. 2020-04-26 22:01:11 +01:00
Jonathan Naylor d66c6d7f9c Fix the multiplication. 2020-04-26 15:24:51 +01:00
Jonathan Naylor 458a3d2d24 Bump the version date. 2020-04-26 13:22:16 +01:00
Jonathan Naylor 6f4c19c006 Convert to Q47 arithmetic. 2020-04-26 13:02:43 +01:00
Jonathan Naylor a31cf3d6f8 Convert the CTCSS TX tones to Q31 from Q15. 2020-04-26 12:07:10 +01:00
Jonathan Naylor 3fb0631953 Merge pull request #233 from F4FXL/FM
Remove IO from CTCSSRX
2020-04-26 11:45:44 +01:00
Geoffrey Merck 028d0cf609 Add q31_t cast 2020-04-26 12:38:23 +02:00
Geoffrey Merck 6824d5662a Remove dependency to IO in CTCSSRX 2020-04-26 12:24:05 +02:00
Jonathan Naylor 1bc8726046 Merge pull request #232 from F4FXL/bugfix/FM_CTCSS_TX
Fix invalid values passed to arm_sin_q15
2020-04-26 08:16:20 +01:00
Jonathan Naylor 05c8c130b6 Merge pull request #231 from F4FXL/feature/FM_Normalized_CTCSS_Threshold
CTCSS threshold is level agnostic
2020-04-26 08:15:15 +01:00
Geoffrey Merck 5051a13711 Fix invalid values passed to arm_sin_q15 2020-04-26 08:16:08 +02:00
Geoffrey Merck 103116e410 Add debug essage when CTCSS status changes 2020-04-26 07:26:35 +02:00
Geoffrey Merck d973238596 CTCSS threshold is level agnostic, experimental
(cherry picked from commit d2d50e21e1)
2020-04-26 06:58:27 +02:00
Jonathan Naylor 4d664c4aa4 Merge pull request #230 from g4klx/revert-229-FM
Revert "Make CTCSS threshold RXLevel and RXBoost agnostic"
2020-04-25 23:48:25 +01:00
Jonathan Naylor bd4096b6be Revert "Make CTCSS threshold RXLevel and RXBoost agnostic" 2020-04-25 23:48:02 +01:00
Jonathan Naylor f92d93772c Merge branch 'FM' of https://github.com/g4klx/MMDVM into FM 2020-04-25 22:32:37 +01:00
Jonathan Naylor b963b2b848 Add optional over deviation blanking. 2020-04-25 22:32:10 +01:00
Jonathan Naylor 9dadb51f11 Merge pull request #229 from F4FXL/FM
Make CTCSS threshold RXLevel and RXBoost agnostic
2020-04-25 22:13:09 +01:00
Geoffrey Merck 23cf22d87d remove Debug info 2020-04-25 23:07:41 +02:00
Geoffrey Merck d2d50e21e1 CTCSS threshold is level agnostic, experimental 2020-04-25 22:12:16 +02:00
Jonathan Naylor 8c38fdb36d Clean out the CTCSS decoder coefficient before initialising. 2020-04-25 17:37:37 +01:00
Jonathan Naylor 4fe1c11250 Remove memory leak and other configuration funnies. 2020-04-25 17:29:10 +01:00
Jonathan Naylor 394ab8dfd1 Merge pull request #228 from m0vse/FM
Fix for Ack/Callsign corruption in FM branch
2020-04-25 16:24:10 +01:00
m0vse 5295e0bdc3 Fix for Ack/Callsign corruption 2020-04-25 16:13:13 +01:00
Jonathan Naylor c638dbe55a Merge branch 'FM' of https://github.com/g4klx/MMDVM into FM 2020-04-25 15:17:53 +01:00
Jonathan Naylor 6ac6deba10 Add two more FM parameters. 2020-04-25 15:17:11 +01:00
Jonathan Naylor d2ce76fe89 Merge pull request #227 from F4FXL/FM
Fix STM32F10X compile complaining about duplicate stuff
2020-04-25 08:12:03 +01:00
Geoffrey Merck 0b27ec5443 Fix STM32F10X compile complaining about duplicate stuff 2020-04-25 08:05:31 +02:00
Jonathan Naylor 868d33ebd2 Rescale the CTCSS TX level. 2020-04-24 15:00:40 +01:00
Jonathan Naylor 9fab1e0823 Rescale some of the tone levels. 2020-04-24 13:13:25 +01:00
Jonathan Naylor 242bc7b322 Bump the version date. 2020-04-24 12:54:50 +01:00
Jonathan Naylor e5c25f55fe Remove the FM RX level. 2020-04-24 12:51:10 +01:00
Jonathan Naylor 33f88344c3 Run the holdoff timer permamnently. 2020-04-24 12:15:58 +01:00
Jonathan Naylor 103d937152 Remove unneeded line. 2020-04-24 11:52:47 +01:00
Jonathan Naylor e721dedf1e Merge pull request #225 from F4FXL/FM
Add FM Filtering
2020-04-24 08:46:45 +01:00
Geoffrey Merck 176e067ab9 Merge branch 'FM' of https://github.com/F4FXL/MMDVM into FM 2020-04-24 09:41:14 +02:00
Geoffrey Merck 2057ef5206 clean up 2020-04-24 09:40:06 +02:00
Geoffrey Merck 5c2659deaa Add FM filtering 2020-04-24 09:40:06 +02:00
Geoffrey Merck 4f9d5a8c70 3rd order IIR 2020-04-24 09:40:06 +02:00
Geoffrey Merck 8ecd8b67f4 Using 2 stage IIR filter 2020-04-24 09:40:06 +02:00
Geoffrey Merck 22c40e1d96 Remove bit roation 2020-04-24 09:40:03 +02:00
Geoffrey Merck a720ceeb54 clean up 2020-04-24 09:21:13 +02:00
Geoffrey Merck f8d082e2dd Add FM filtering 2020-04-24 09:10:50 +02:00
Geoffrey Merck 507a4bf64c 3rd order IIR 2020-04-23 22:37:29 +02:00
Jonathan Naylor 7a75db2aeb Remove the bit shift of the sample. 2020-04-23 21:30:41 +01:00
Geoffrey Merck ce0aebce48 Using 2 stage IIR filter 2020-04-23 21:16:52 +02:00
Geoffrey Merck 906de3ad11 Remove bit roation 2020-04-23 21:16:20 +02:00
Jonathan Naylor bf5ad25609 A working fixed point Goertzel based on simulations. 2020-04-23 12:36:34 +01:00
Jonathan Naylor f19009b132 Allow for two levels of the callsign. 2020-04-22 22:10:34 +01:00
Jonathan Naylor 526a53cd8c Use fixed point for the Goertzel algorithm. 2020-04-22 17:40:01 +01:00
Jonathan Naylor 57730d7f81 Implement an efficient FIR filter. 2020-04-22 14:37:23 +01:00
Jonathan Naylor f936bc6fe8 Use a shorter filter. 2020-04-22 14:15:07 +01:00
Jonathan Naylor 3f1f1d1586 Small tidy-ups. 2020-04-22 14:08:34 +01:00
Jonathan Naylor 7940025095 Merge pull request #223 from F4FXL/FM
One loop to rule them all !
2020-04-22 13:30:56 +01:00
Geoffrey Merck 63847ebe62 One loop to rule them all !
Change CFM::Samples and CFMCTCSSRX::process to be able to process all
stuff in one and only loop.
2020-04-22 11:04:27 +02:00
Jonathan Naylor 03f5056236 Small code cleanups. 2020-04-21 22:30:28 +01:00
Jonathan Naylor 23ff29c8f1 Merge pull request #222 from F4FXL/FM
Almost working FM
2020-04-21 22:09:58 +01:00
Geoffrey Merck 1b0229ca6c Attemp to do filtering 2020-04-21 23:03:30 +02:00
Geoffrey Merck ae6cbcd9e7 Minor clean up 2020-04-21 22:43:59 +02:00
Geoffrey Merck 1c599138ad GetAudio do not take any arguments 2020-04-21 22:00:11 +02:00
Geoffrey Merck 9170c398be Reenable CTCSS 2020-04-21 21:36:30 +02:00
Geoffrey Merck 04fd9838b5 Fix state machine wrong kerchunk 2020-04-21 21:00:09 +02:00
Geoffrey Merck 8d340cbfba (almost) One loop to rule all the samples
Avoid looping over and over the samples. One
2020-04-21 20:38:02 +02:00
Geoffrey Merck 87c3b57ae4 Stripping ut stuff, testing 2020-04-21 18:45:11 +02:00
Geoffrey Merck 7befef2f4a Avoid looping samples 2 times, convert each sample on the fly 2020-04-21 18:41:27 +02:00
Geoffrey Merck b2dcbb2df8 Merge remote-tracking branch 'upstream/FM' into FM 2020-04-21 07:03:35 +02:00
Jonathan Naylor 0a51b4c34e Store FM output in a ring buffer. 2020-04-20 21:57:21 +01:00
Geoffrey Merck 3b653dca6a Merge remote-tracking branch 'upstream/FM' into FM 2020-04-20 20:49:58 +02:00
Jonathan Naylor 046a1de51a Reduce the size of the main FM filter. 2020-04-20 13:54:11 +01:00
Jonathan Naylor ae58f8eb64 Don't square the threshold value. 2020-04-20 13:28:07 +01:00
Geoffrey Merck e4c351d5d0 delete old BS 2020-04-20 07:46:03 +02:00
Geoffrey Merck 0b0a59497f Merge branch 'FM' of https://github.com/F4FXL/MMDVM into FM 2020-04-20 07:43:07 +02:00
Geoffrey Merck 939b019592 delete old BS 2020-04-20 07:42:39 +02:00
Geoffrey Merck 3d54519dbf add CTCSS decoder 2020-04-20 07:42:39 +02:00
Geoffrey Merck 94f566aacc Add Goertzel 2020-04-20 07:42:39 +02:00
Geoffrey Merck a765e863c0 delete old BS 2020-04-20 07:42:39 +02:00
Geoffrey Merck 9e552ba1ab add CTCSS decoder 2020-04-20 07:39:19 +02:00
Geoffrey Merck b03fead62d Add Goertzel 2020-04-20 07:39:19 +02:00
Geoffrey Merck 2825c25607 Merge remote-tracking branch 'upstream/FM' into FM 2020-04-20 07:23:59 +02:00
Jonathan Naylor 5ed8eeda6f Allow kerchunk audio to pass through. 2020-04-19 21:40:51 +01:00
Jonathan Naylor 1aef1a39f2 Revert the CTCSS decoder to floats. 2020-04-19 21:21:10 +01:00
Jonathan Naylor a310bf0547 Adjust the coefficients again. 2020-04-19 19:46:44 +01:00
Geoffrey Merck 116b51bd8d delete old BS 2020-04-19 20:45:14 +02:00
Geoffrey Merck c05e7bf873 Merge branch 'FM' of https://github.com/F4FXL/MMDVM into FM 2020-04-19 20:44:18 +02:00
Geoffrey Merck c14ae56e2d delete old BS 2020-04-19 20:43:50 +02:00
Geoffrey Merck 32a71bfbf6 Use long based algorithm 2020-04-19 20:42:57 +02:00
Geoffrey Merck 7435074c0f add CTCSS decoder 2020-04-19 19:34:47 +02:00
Geoffrey Merck ec202d7fb9 Add Goertzel 2020-04-19 19:34:47 +02:00
Jonathan Naylor 6575cba982 Rescale the coefficient. 2020-04-19 17:59:04 +01:00
Jonathan Naylor a17bd9cc1d Don't scale up the sample values. 2020-04-19 17:37:24 +01:00
Jonathan Naylor f7e5c2436c Convert the Goertzel algorithm to Q15 and Q31. 2020-04-19 16:52:11 +01:00
Jonathan Naylor 85816d5bec Re-add COS. 2020-04-18 16:59:25 +01:00
Jonathan Naylor ebdba2bdb9 Convert to using floats. 2020-04-18 16:48:30 +01:00
Jonathan Naylor 6d5b864cba Start the Goertzel development. 2020-04-18 16:07:52 +01:00
Jonathan Naylor c8a450b00d Ensure all timers are stopped when we leave FM mode. 2020-04-18 15:51:49 +01:00
Jonathan Naylor 61ccd79c5f Set up the FM mode pins, partially. 2020-04-18 14:31:21 +01:00
Jonathan Naylor c55002534e Rename the Goertzel class to CTCSSRX. 2020-04-18 13:55:34 +01:00
Jonathan Naylor 8ca756ec22 Simplify the FM arguments. 2020-04-18 13:47:41 +01:00
Jonathan Naylor d1c106b3b8 Add state machine debugging messages. 2020-04-17 18:53:28 +01:00
Jonathan Naylor 564260b2f1 Add the main audio filter. 2020-04-17 18:45:42 +01:00
Jonathan Naylor 4a85122483 CTCSS tones are added to the audio, not replacing it. 2020-04-17 14:11:42 +01:00
Jonathan Naylor bc889f3d26 Handle some extra edge cases. 2020-04-17 13:11:21 +01:00
Jonathan Naylor 95e76f387c Complete the CW keyer. 2020-04-16 21:15:15 +01:00
Jonathan Naylor 4a5f985d02 More efficient CTCSS tone generation. 2020-04-16 14:27:33 +01:00
Jonathan Naylor bbe56f5082 Return configuration errors. 2020-04-16 14:00:31 +01:00
Jonathan Naylor 4b0c3d88f3 More work on the keyer. 2020-04-15 22:41:30 +01:00
Jonathan Naylor c103ac91b3 Add the CTCSS tone generator. 2020-04-15 19:49:26 +01:00
Jonathan Naylor ebd87584da Add the timeout tones. 2020-04-15 18:38:39 +01:00
Jonathan Naylor a9a985182f Add the timer class functionality. 2020-04-15 17:18:01 +01:00
Jonathan Naylor db6fde90e0 Add the intial state machine. 2020-04-15 16:31:49 +01:00
Jonathan Naylor 74228c506e Add stubs for FM classes. 2020-04-15 15:24:01 +01:00
Geoffrey Merck bcd43006ac Merge branch 'FM' of https://github.com/F4FXL/MMDVM into FM 2020-04-14 13:33:59 +02:00
Geoffrey Merck cf616caef9 add CTCSS decoder 2020-04-14 13:33:35 +02:00
Geoffrey Merck 7ab6e51c2c Add Goertzel 2020-04-14 13:33:35 +02:00
Jonathan Naylor 7a549e96ba Handle the net ack parameter. 2020-04-14 12:23:26 +01:00
Geoffrey Merck 3e4d709225 Merge remote-tracking branch 'upstream/FM' into FM 2020-04-14 12:16:54 +02:00
Geoffrey Merck 031563e727 add CTCSS decoder 2020-04-14 12:16:07 +02:00
Geoffrey Merck 3f80248477 Add Goertzel 2020-04-14 12:15:25 +02:00
Jonathan Naylor c84d81d91c Add the minimum time for a 'K' parameter. 2020-04-13 15:54:37 +01:00
Jonathan Naylor ef65268b45 First version of initialisation. 2020-04-12 15:28:56 +01:00
Jonathan Naylor 9d725b9479 Beginnings of FM controller support. 2020-04-11 22:08:17 +01:00
Andy CA6JAU b4647d8d1b Merge pull request #214 from veraabad/master
Fixed deploy-pi-f7
2019-10-23 21:22:43 -03:00
Abad Vera f28a22802d Fixed deploy-pi-f7 2019-10-23 14:36:34 -07:00
Jonathan Naylor 8a60fc1ecb Fix id string for the rpt_hat_tgo. 2019-07-15 09:06:43 +01:00
Jonathan Naylor dfad6d8409 Revert "Merge pull request #204 from shawnchain/support_udid"
This reverts commit b94b8afb77, reversing
changes made to 7c863671c9.
2019-06-04 10:12:53 +01:00
Jonathan Naylor b94b8afb77 Merge pull request #204 from shawnchain/support_udid
Fix HW_TYPE string of RPT_HAT_TGO for MMDVMCal and add UDID support
2019-05-17 08:08:06 +01:00
Shawn Chain 0f37bfa20d arduino_due support 2019-05-16 23:29:28 +08:00
Shawn Chain d6d03158d0 Fix HWType string of RPT_HAT_TGO to work with MMDVMCal and add udid support to the firmware 2019-05-16 23:22:27 +08:00
Jonathan Naylor 7c863671c9 Merge pull request #203 from shawnchain/stm32f1
add STM32F10X_Lib for stm32f105 support
2019-05-14 13:24:48 +01:00
Shawn Chain 2a6db2ab52 Make STM32F1_POG as default type when Makefile.CMSIS is used 2019-05-14 11:53:21 +08:00
Shawn Chain c8a345a301 rollback changes on Config.h 2019-05-14 11:43:29 +08:00
Shawn Chain 37efcb3d4f add STM32F10X_Lib 2019-05-13 21:59:32 +08:00
Jonathan Naylor ff7a9fdd4e Simplify the state change. 2019-03-01 08:00:20 +00:00
Jonathan Naylor 9ccbb842bf Merge branch 'pocsagcal' 2019-01-31 07:56:41 +00:00
Jonathan Naylor 73d3bd5778 Do the POCSAG calibration in a different way. 2019-01-30 14:31:15 +00:00
Jonathan Naylor f785a5260a Merge branch 'master' of https://github.com/g4klx/MMDVM 2019-01-30 13:51:22 +00:00
Jonathan Naylor 03716daca0 Bump the version date. 2019-01-30 13:51:05 +00:00
phl0 9987140790 Fix damn typo 2019-01-30 14:49:21 +01:00
phl0 6b00f7d27a Change to square wave and align amplitude 2019-01-30 14:42:17 +01:00
phl0 98fffb9b77 Fix const compiler issue 2019-01-30 13:02:55 +01:00
Jonathan Naylor 000da1889f Simplify the POCSAG calibration code. 2019-01-30 11:18:16 +00:00
phl0 0a634b1223 Fix some minor bugs :) 2019-01-30 09:40:09 +01:00
phl0 5456f403a1 Add changes by G4KLX 2019-01-30 09:25:33 +01:00
phl0 461182bf60 1st attempt to send 600Hz sine wave 2019-01-23 16:23:45 +01:00
phl0 580ba0b536 Add synthetic 600Hz sine wave and some more POCSAGCal states 2019-01-23 14:58:01 +01:00
phl0 5e3c4c91bb Add basics for a POCSAG Cal mode 2019-01-22 22:21:40 +01:00
phl0 3875da80e7 Make MODE_PINS available on MMDVM_RPT_Hat 2018-11-02 15:02:34 +01:00
Jonathan Naylor 6af252f315 Ignore DVMEGA-Cast specific command. 2018-10-31 14:49:57 +00:00
Jonathan Naylor e46ef4f9ce Merge pull request #198 from gatekeep/master
fix proper PDU reception and processing;
2018-10-09 07:43:11 +01:00
Bryan Biedenkapp 3bae422a8e fix proper PDU reception and processing; 2018-10-08 10:19:31 -04:00
Andy CA6JAU d7526891c5 Restore ring buffer default size 2018-10-07 21:10:34 -03:00
Florian (DF2ET) 6563ee2fb2 Merge pull request #195 from shawnchain/master
Fixed the concat macro error if no GITVERSION is defined, which is in…
2018-09-18 15:23:36 +02:00
Shawn Chain c0952d73d1 Fixed the concat macro error if no GITVERSION is defined, which is introduced by my previous changes. 2018-09-18 21:19:50 +08:00
phl0 4d780389bf Add GitVersion target to Makefile.CMSIS 2018-09-18 10:46:24 +02:00
phl0 5c9abf2eeb Only need rawRSSI variable if SEND_RSSI is defined 2018-09-18 10:33:33 +02:00
phl0 11997ca017 Fix -Wmisleading-indentation compiler warning 2018-09-18 10:17:51 +02:00
Jonathan Naylor ed36d13c8f Merge pull request #194 from shawnchain/rpt_hat_tgo_board
Add support for RPT_HAT_TGO board by BG4TGO and BG5HHP
2018-09-18 09:11:42 +01:00
Shawn Chain 119eea161e Restore the DEFS_DVM for DVM board 2018-09-18 15:46:33 +08:00
Shawn Chain d67809eda6 Add support for RPT_HAT_TGO board by BG4TGO and BG5HHP 2018-09-15 12:06:41 +08:00
phl0 428d36da90 Rename F7Hat to (MMDVM_)RPT_Hat 2018-08-29 09:49:53 +02:00
phl0 328e88856a Add MODE_PINS for F7hat boards 2018-08-28 15:22:54 +02:00
Andy CA6JAU 99966e20ad Reduce buffer sizes for Teensy 3.2/3.1 2018-08-19 12:16:36 -03:00
phl0 1fef7772cb Add MODE pin for POCSAG 2018-08-08 11:16:16 +02:00
Andy CA6JAU f8ab4fe9bd Fix for STM32F105 startup hang 2018-08-06 14:53:47 -04:00
phl0 c2e785cdc4 Generalize MODE_PINS (not F4 specific any more) 2018-08-01 21:12:31 +02:00
phl0 5f19cfcb49 Rename MODE_PINS to MODE_LEDS 2018-08-01 21:09:57 +02:00
Florian (DF2ET) 5405395e1a Merge pull request #186 from N4IRS/master
Add POCSAG Pin for STM32-DVM
2018-07-24 12:05:24 +02:00
Steve N4IRS 3c95d1f604 Add POCSAG Pin for STM32-DVM 2018-07-24 05:58:58 -04:00
Jonathan Naylor da8023eabf Bump the version date. 2018-07-23 21:53:36 +01:00
phl0 0d55ba317d Correct POCSAG LED for F7Hat 2018-07-23 11:39:16 +02:00
Andy CA6JAU 404dc3d99d Additional check to transmit all POCSAG buffer 2018-07-20 20:31:38 -04:00
Andy CA6JAU 4821d0e959 Fix for missing POCSAG start tone 2018-07-20 14:17:33 -04:00
Jonathan Naylor db3649827f Merge pull request #184 from Hootie81/VK6MST_Shield
Add support VK6MST_Shield Serial pass-thru
2018-07-20 12:17:01 +01:00
Hootie81 5bec0d0780 Add support VK6MST_Shield Serial pass-thru 2018-07-20 21:00:09 +10:00
Andy CA6JAU 110062bf65 Reduce the size of serial ring buffer 2018-07-20 00:50:53 -04:00
Jonathan Naylor f3c621307a Restore the original configuration file. 2018-07-19 18:21:17 +01:00
Jonathan Naylor 03177a05e7 Merge pull request #183 from Hootie81/VK6MST_Shield
Add support for VK6MST_Shield
2018-07-19 18:15:57 +01:00
Hootie81 e93b08380d Add support for VK6MST_Shield 2018-07-19 13:01:20 +00:00
phl0 012b366143 Add POCSAG Pin for F7hat 2018-07-18 22:35:13 +02:00
phl0 fd8bc07b61 Merge branch 'master' into F7hat 2018-07-18 22:30:34 +02:00
phl0 68106058d6 Add missing ifdefines for F7Hat 2018-07-18 21:32:56 +02:00
phl0 d62c945887 Add POCSAG pin defs for f767 target 2018-07-12 07:36:44 +02:00
phl0 0aea9aef38 Correct typo in Makefile 2018-07-12 07:16:40 +02:00
Andy 88409dccd2 Add temporary POCSAG pin definitions for F446 and F722 2018-07-12 00:59:08 -04:00
Jonathan Naylor f705656178 Bump the version date. 2018-07-05 18:44:31 +01:00
Jonathan Naylor 5c61ee6be8 Add an mode output pin on the STM32-F7M board as suggested by Tom BG4TGO. 2018-07-05 18:29:18 +01:00
Jonathan Naylor a4af04fae2 Allow for alternative LEDs for NXDN and POCSAG. 2018-07-04 18:40:54 +01:00
phl0 6b28efc011 Flash F7Hat via GPIO 2018-07-01 01:45:42 +02:00
phl0 8c6289802f Add support for MMDVM-F7-Hat 2018-07-01 01:41:33 +02:00
Jonathan Naylor 78d79d4124 Update the README file. 2018-06-26 18:18:43 +01:00
Jonathan Naylor 76d2058075 Recalculate the TX delay for POCSAG. 2018-06-26 18:16:13 +01:00
Jonathan Naylor dcd8142c51 Add a smoothing filter to the POCSAG TX waveform. 2018-06-25 18:00:11 +01:00
Jonathan Naylor 88c530d9e6 Merge branch 'master' into pocsag 2018-06-25 17:47:24 +01:00
phl0 61d5dd6eb3 Add submodules for F4/F7 libs 2018-06-23 22:40:13 +02:00
Jonathan Naylor 9eb6bc1a60 Add the POCSAG mode pin for the Arduino Due, Teensy 3.2/3.6 and the
STM32F105.
2018-06-19 18:17:05 +01:00
Jonathan Naylor 2098146af8 Rename ARDUINO_MODE_PINS to MODE_PINS. 2018-06-19 18:01:24 +01:00
Jonathan Naylor ef32988827 More tweaking of the POCSAG deviation. 2018-06-18 22:12:13 +01:00
Jonathan Naylor ce05dec2e6 Fix crash caused by the larger version string. 2018-06-18 21:32:08 +01:00
Jonathan Naylor 895bed1f70 Fix getStatus length. 2018-06-18 19:18:47 +01:00
phl0 dbea23f171 Merge branch 'master' into pocsag 2018-06-14 19:34:16 +02:00
Florian (DF2ET) ead9747f95 Merge pull request #179 from EA3HKB/patch-1
Add description for non TCXO systems
2018-06-14 19:31:08 +02:00
Florian (DF2ET) 5fe665a6d3 Merge branch 'master' into patch-1 2018-06-14 19:30:52 +02:00
Florian (DF2ET) 3515b16222 Merge pull request #178 from EA3HKB/patch-2
Define new TCXO frequency names for add NO TCXO option
2018-06-14 19:29:39 +02:00
EA3HKB a5c162a75e Define new TCXO frequency names for add NO TCXO option 2018-06-14 19:05:48 +02:00
EA3HKB b5a56487b1 Add description for non TCXO systems
Fixes compiler error
2018-06-14 18:27:48 +02:00
Jonathan Naylor d151c100db Fix length of the getConfig reply. 2018-06-14 07:25:09 +01:00
Jonathan Naylor 56ced0d939 Decrease the deviation. 2018-06-12 21:42:15 +01:00
Jonathan Naylor b6cb23d876 Invert the transmit frequencies. 2018-06-12 20:59:39 +01:00
Jonathan Naylor 20a0a875f3 Add the POCSAG transmitter. 2018-06-06 20:27:46 +01:00
Jonathan Naylor d6c1bea80a Merge pull request #177 from phl0/tcxo
Add TCXO frequency to modem description
2018-06-06 13:34:38 +01:00
Jonathan Naylor 6d4ec5d8a1 Merge pull request #176 from phl0/gitignore
Add F7 lib to .gitignore
2018-06-06 13:33:59 +01:00
phl0 474dce0141 Add F7 lib to .gitignore 2018-06-06 14:06:42 +02:00
phl0 5adbe6d0d5 Add TCXO frequency to modem description 2018-06-06 14:05:36 +02:00
Jonathan Naylor 28adbef81b Add YSF TX hang. 2018-06-04 20:50:43 +01:00
Andy CA6JAU c86d53d9d4 Change 1.2 kHz fill tone by a pseudo random fill (DMR DMO) 2018-06-01 14:39:02 -04:00
Andy CA6JAU eb33bdde5a Merge pull request #171 from g0wfv/constant_srv_led
Constant Service LED
2018-05-23 12:26:30 -04:00
g0wfv 0a89469ffc Constant Service LED 2018-05-23 17:12:53 +01:00
Andy CA6JAU bdd4f395ad Merge pull request #170 from gatekeep/master
Correctly use the CORRELATION_COUNTDOWN constant vs magic number of 5U.
2018-05-15 12:34:23 -04:00
Bryan Biedenkapp 4ae2999e95 Correctly use the CORRELATION_COUNTDOWN constant vs magic number of 5U. 2018-05-15 12:30:15 -04:00
Andy CA6JAU 077bb3b366 Merge pull request #169 from N4IRS/master
Fix comments for STM32-DVM Rev 3
2018-05-15 08:09:14 -04:00
Steve N4IRS b0ca829cf6 Fix comments for STM32-DVM Rev 3 2018-05-15 07:54:39 -04:00
Andy CA6JAU c11ff6bf20 Increasing ring buffer lengths 2018-05-14 22:41:26 -04:00
Jonathan Naylor e1b99f6ee4 Merge pull request #168 from gatekeep/master
Add support to decode P25 DUIDs and non-LDU packets in during processHdr.
2018-05-14 18:45:26 +01:00
Bryan Biedenkapp 4c792ff668 Fix commit with bad line endings. 2018-05-14 10:11:58 -04:00
Bryan Biedenkapp 260dca9664 Add support to decode DUIDs in during processHdr; Add support to process non-LDU packets during processHdr. 2018-05-14 09:09:43 -04:00
Andy CA6JAU 91a15a5782 Merge pull request #167 from N4IRS/master
Add support for the STM32-DVM Rev 3
2018-05-13 08:42:44 -04:00
Steve N4IRS 03f15d8689 Add support for the STM32-DVM Rev 3 2018-05-13 07:39:12 -04:00
Jonathan Naylor 86bf20b06b Update the README. 2018-04-30 17:58:50 +01:00
Jonathan Naylor 41ffe6d2eb Fix Nucleo compiler issues. 2018-04-17 22:32:39 +01:00
Jonathan Naylor 41946ff0aa Bump the version date. 2018-03-27 21:35:38 +01:00
Jonathan Naylor 0ca06e2219 Add new transparent data bypass. 2018-03-21 22:01:35 +00:00
Jonathan Naylor 59ed3f07c8 Change the pin for the NXDN LED on the Teensy. 2018-03-07 20:04:23 +00:00
Andy CA6JAU e20630a425 Support for MMDVM-F7M Pi-Hat board (F0DEI) 2018-03-03 17:05:23 -03:00
Andy CA6JAU ec8a2bc9ff Change NXDN LED pin to PA3 in Arduino header (Nucleo64 F446) 2018-03-01 00:49:14 -03:00
Jonathan Naylor b21c1f21a4 Make the DC blocker optional to reduce CPU load. 2018-02-26 19:55:14 +00:00
Jonathan Naylor 01b3dcc689 Reduce CPU load on idle. 2018-02-26 19:37:15 +00:00
Andy CA6JAU 23f27cf496 Bump the version date 2018-02-23 16:14:26 -03:00
Andy CA6JAU 9410e724b8 Increasing TX buffer for NXDN 2018-02-18 12:21:20 -03:00
Jonathan Naylor 6f7b95a15c Merge branch 'master' into nxdn 2018-02-14 06:47:18 +00:00
Jonathan Naylor d5c2fe9280 Change the TX Delay calculation because of the longer symbol length. 2018-02-12 19:23:21 +00:00
Jonathan Naylor 450005d611 Merge pull request #152 from juribeparada/nxdn
Add NXDN 1031 Hz Test Pattern and Merge branch 'master' into nxdn
2018-02-12 15:34:13 +00:00
Andy CA6JAU 97a72f5b7f Fix Config.h overwrite for previous commit 2018-02-12 10:45:38 -03:00
Andy CA6JAU ce6d03ae13 Add NXDN 1031 Hz Test Pattern 2018-02-12 10:34:49 -03:00
Jonathan Naylor 23f7b6a750 Merge pull request #151 from juribeparada/master
Add DMR 1031 Hz Test Pattern support for DMO mode
2018-02-12 06:41:00 +00:00
Andy CA6JAU 36a4404c5c Merge branch 'master' into nxdn 2018-02-11 22:09:53 -03:00
Andy CA6JAU 66241f2f1b Add DMR 1031 Hz Test Pattern for DMO mode 2018-02-11 21:37:54 -03:00
Jonathan Naylor e5aab0f165 Merge pull request #150 from juribeparada/nxdn
Merge branch 'master' into nxdn
2018-02-11 08:41:20 +00:00
Andy CA6JAU 14a4dc2bf9 Merge branch 'master' into nxdn 2018-02-10 21:00:59 -03:00
Andy CA6JAU 42408d5a9a Merge remote-tracking branch 'g4klx/nxdn' into nxdn 2018-02-10 21:00:47 -03:00
Andy CA6JAU 55cb3945df Merge remote-tracking branch 'g4klx/master' 2018-02-10 20:59:56 -03:00
Jonathan Naylor a4a95ba5d0 Merge pull request #149 from juribeparada/master
Fixing inverse SINC TX filter for P25
2018-02-10 20:42:07 +00:00
Andy CA6JAU 8a1ac05df2 Fixing inverse SINC TX filter for P25 2018-02-10 14:44:30 -03:00
Jonathan Naylor 78ae7f3b33 Merge pull request #148 from juribeparada/devel
Add some additional idle frames after a DMR Abort
2018-02-09 22:16:25 +00:00
Jonathan Naylor c783d6d101 Merge pull request #147 from juribeparada/nxdn
Add SINC filter for NXDN modulator and new deviation values
2018-02-09 06:38:34 +00:00
Andy CA6JAU 3ea95ce53d Add SINC filter for NXDN modulator and new deviation values 2018-02-08 21:31:45 -03:00
Andy CA6JAU 16d978cea2 Merge remote-tracking branch 'g4klx/nxdn' into nxdn 2018-02-08 18:47:01 -03:00
Jonathan Naylor e43c992249 Merge pull request #146 from juribeparada/nxdn
Add inverse SINC filter for NXDN demodulator
2018-02-08 21:42:32 +00:00
Andy CA6JAU e78fc5b701 Merge remote-tracking branch 'g4klx/nxdn' into nxdn 2018-02-08 18:35:05 -03:00
Andy CA6JAU eebfc56013 Add inverse SINC filter for NXDN demodulator 2018-02-08 18:34:53 -03:00
Jonathan Naylor 1d4bd4e409 Make NXDN sync detection more lenient when receiving a transmission. 2018-02-08 18:40:23 +00:00
Jonathan Naylor 9f28d2f69a Small cleanup. 2018-02-07 21:02:07 +00:00
Andy CA6JAU 9c01a6328a Merge remote-tracking branch 'g4klx/nxdn' into nxdn 2018-02-07 17:32:54 -03:00
Jonathan Naylor 46528127dc Add support for NXDN 4800. 2018-02-07 20:25:16 +00:00
Jonathan Naylor b34d3c3dbd Revert "Start work on 4800 baud NXDN support."
This reverts commit a6b6219c6d.
2018-02-07 18:07:51 +00:00
Andy CA6JAU 2bc99deec2 Additional available data FIFO check 2018-02-07 13:55:15 -03:00
Jonathan Naylor a6b6219c6d Start work on 4800 baud NXDN support. 2018-02-07 07:52:18 +00:00
Andy CA6JAU caaf090b10 DMR abort counter for each slot 2018-02-05 22:36:05 -03:00
Andy CA6JAU 01b7641bd1 Merge remote-tracking branch 'g4klx/nxdn' into nxdn 2018-02-05 18:44:44 -03:00
Andy CA6JAU b42ddbbf42 Merge remote-tracking branch 'g4klx/master' 2018-02-05 18:41:35 -03:00
Jonathan Naylor f32b8dc4e8 Merge branch 'master' into nxdn 2018-02-05 20:06:46 +00:00
Jonathan Naylor 9e6a4ca6df Merge pull request #145 from juribeparada/master
Fix mistake reading COS input pin using STM32F4 and STM32F7
2018-02-05 14:12:11 +00:00
Andy CA6JAU 91e5d588b0 Fix mistake reading COS input pin using STM32F4 and STM32F7 2018-02-05 09:42:40 -03:00
Andy CA6JAU 555c308749 Updating DMR abort delay 2018-02-05 09:12:05 -03:00
Andy CA6JAU 7b88e883f9 Adding some additional idle frames after a DMR Abort 2018-02-03 20:10:25 -03:00
Andy CA6JAU e7b52023c6 Merge remote-tracking branch 'g4klx/master' 2018-02-03 20:04:52 -03:00
Jonathan Naylor e7a40343b1 Adjust NXDN deviation slightly. 2018-01-22 19:58:39 +00:00
Jonathan Naylor dfc262bbcd Changes based on first NXDN RF tests. 2018-01-18 21:25:26 +00:00
Jonathan Naylor 615c705044 Fix byte ordering for NXDN syncs. 2018-01-15 20:07:00 +00:00
Jonathan Naylor c59c32b350 Incorporate NXDN specification values for errors. 2018-01-11 19:47:23 +00:00
Jonathan Naylor d69df42de4 Add the NXDN TX preamble. 2018-01-11 18:29:58 +00:00
Jonathan Naylor 99dafe6327 Merge branch 'master' into nxdn 2018-01-11 07:27:52 +00:00
Jonathan Naylor 5da3c9352d Merge pull request #140 from juribeparada/nxdn
Fixing STM32F4 and STM32F7 pin definitions for NXDN
2018-01-11 07:22:39 +00:00
Jonathan Naylor fdc15b355f Merge pull request #139 from juribeparada/master
Reducing the bit error number for the EOT sequence (D-Star)
2018-01-11 07:21:23 +00:00
Andy CA6JAU 4f49f65a1c Fixing STM32F4 and STM32F7 pin definitions for NXDN 2018-01-11 01:50:41 -03:00
Andy CA6JAU d99e21f0f9 Reducing the bit error number for the EOT sequence (D-Star) 2018-01-10 20:04:29 -03:00
Jonathan Naylor 9b5bbee265 Add actual NXDN values. 2018-01-10 21:39:29 +00:00
Jonathan Naylor b5ca5e3839 NXDN first cut, not working yet. 2018-01-10 20:30:35 +00:00
Andy CA6JAU b988750e78 Merge remote-tracking branch 'g4klx/master' 2018-01-07 10:28:31 -03:00
Jonathan Naylor 78a51d416d Merge pull request #137 from sfowlr/master
STM32-DVM & MMDVM_POG RSSI bugfix
2018-01-07 13:28:01 +00:00
Jonathan Naylor 3a539e1243 Merge pull request #138 from juribeparada/master
Adding P25 1011 Hz Test Pattern
2018-01-07 13:27:42 +00:00
Andy CA6JAU db133c819e Add comments 2018-01-07 09:48:30 -03:00
Andy CA6JAU 02d5218baa Changing name DMR1KCAL to DMRCAL1K 2018-01-07 00:24:58 -03:00
Andy CA6JAU 394d0cbc6b Merge remote-tracking branch 'g4klx/master' 2018-01-07 00:07:35 -03:00
Andy CA6JAU b4456aed28 Adding P25 1011 Hz Test Pattern 2018-01-07 00:06:41 -03:00
Spencer Fowler 9e56268156 STM32-DVM & MMDVM_POG RSSI bugfix 2018-01-06 18:48:56 -06:00
Jonathan Naylor 94e65ba6cc Merge pull request #136 from juribeparada/master
Adding DMR 1031 Hz Test Pattern
2018-01-06 14:31:02 +00:00
Andy CA6JAU 2ec02e53e3 Fix comment and formatting 2018-01-06 11:05:43 -03:00
Andy CA6JAU c6e9227aee More cleanup and adding comments 2018-01-06 11:00:03 -03:00
Andy CA6JAU e1d1faea82 Code reordering and cleanup 2018-01-04 01:10:33 -03:00
Andy CA6JAU 4871ad1210 Adding DMR 1031 Hz Test Pattern 2018-01-03 00:55:14 -03:00
Jonathan Naylor 7b03336469 Merge pull request #134 from juribeparada/master
Adding 80 Hz square wave test signal support for MMDVMCal
2017-12-31 11:30:55 +00:00
Andy CA6JAU b846e5a7f3 Adding 80 Hz square wave test signal support 2017-12-30 20:47:48 -03:00
Andy CA6JAU ee1d512132 Merge remote-tracking branch 'g4klx/master' 2017-12-30 18:19:16 -03:00
Jonathan Naylor 628665175c Merge pull request #126 from juribeparada/devel
Adding support for MMDVM-Pi with STM32F722
2017-11-06 09:32:28 +00:00
Andy CA6JAU a921df7335 Separating linker script for F722 and F767 2017-11-04 15:28:38 -03:00
Andy CA6JAU 6bbc716e4b Fixing delay loop for all STM32F7 devices 2017-11-04 15:27:32 -03:00
Andy CA6JAU cf448158cb Adding support for MMDVM-Pi with STM32F722 2017-11-02 00:41:26 -03:00
Andy CA6JAU 6a6688ea8d Merge remote-tracking branch 'g4klx/master' 2017-11-01 21:01:30 -03:00
Andy CA6JAU c86ba51523 Merge remote-tracking branch 'g4klx/master' into devel 2017-11-01 21:01:07 -03:00
Jonathan Naylor a8eae44209 Merge pull request #125 from juribeparada/devel
Adding pin definitions for MMDVM-F4M Pi-Hat F0DEI board
2017-10-30 14:05:13 +00:00
Jonathan Naylor efa407a579 Add the optional RX DC Offset. 2017-10-28 12:45:04 +01:00
Andy CA6JAU b54dc34215 Fix mistake in Makefile 2017-10-22 22:55:35 -03:00
Andy CA6JAU 167296200d Adding pin definitions for MMDVM-F4M Pi-Hat F0DEI board 2017-10-22 22:48:16 -03:00
Andy CA6JAU ca6601ca6d Merge remote-tracking branch 'g4klx/master' 2017-10-22 21:00:03 -03:00
Jonathan Naylor 8d7b4ef84d Merge pull request #124 from juribeparada/master
Better way for sampling frequency calculation for MMDVM-Pi
2017-10-16 09:23:58 +01:00
Andy CA6JAU 2279162db5 Better way for sampling frequency calculation for MMDVM-Pi 2017-10-15 17:32:24 -03:00
Jonathan Naylor 9cfbdebc7b Merge pull request #122 from juribeparada/master
No external clock needed for MMDVM-Pi
2017-10-15 13:19:59 +01:00
Andy CA6JAU 7583446380 No external clock needed for MMDVM-Pi 2017-10-14 21:26:53 -03:00
Andy CA6JAU 94b4fe3fd6 Merge remote-tracking branch 'g4klx/master' 2017-10-02 14:21:30 -03:00
Jonathan Naylor d86b10fc1d Merge pull request #117 from juribeparada/master
Fix some comments for STM32F4XX & STM32F7XX
2017-10-02 16:33:22 +01:00
Andy CA6JAU 7996a45125 Fix some comments for STM32FXXX 2017-10-02 12:20:25 -03:00
Jonathan Naylor 655e7f8218 Merge pull request #115 from juribeparada/master
Separating STM32F4 and STM32F7 compilation in Makefile
2017-09-27 09:19:29 +01:00
Andy CA6JAU c2a3f83a9f Separating STM32F4 and STM32F7 compilation in Makefile 2017-09-24 20:52:05 -03:00
Andy CA6JAU 0505e76422 Removing cstddef include for better toolchain compatibility (F4 & F7 devices). Please update the Lib. 2017-09-23 12:47:43 -03:00
Andy CA6JAU 265828b127 Merge remote-tracking branch 'g4klx/master' 2017-09-23 12:32:53 -03:00
Jonathan Naylor 4134a656b0 Merge pull request #114 from phl0/CreateBinaryOnCompile
Create .bin on compile target instead of upload
2017-09-10 13:30:31 +01:00
phl0 cd0bd6e5c4 Create .bin on compile target instead of upload 2017-09-10 14:04:41 +02:00
Jonathan Naylor 418ce895cb Merge pull request #113 from juribeparada/master
Changing service LED pinout for F767
2017-09-07 07:14:44 +01:00
Andy CA6JAU 8a9510b48a Fixing pinout information for Nucleo64 F446 and Nucleo144 F767 2017-09-06 23:23:24 -03:00
Andy CA6JAU b22ada3fa2 Changing service LED pinout for F767 2017-09-06 23:02:02 -03:00
Andy CA6JAU b4ac4838fd Merge remote-tracking branch 'g4klx/master' 2017-09-04 00:18:16 -03:00
Jonathan Naylor 89000729d2 Merge pull request #112 from N4IRS/patch-1
Fix undefined reference
2017-08-31 08:37:52 +01:00
Steve Zingman abea72b4d5 Fix undefined reference
Fix undefined reference to `CIO::delayInt(unsigned int)' for LED test
2017-08-30 21:13:33 -04:00
Jonathan Naylor 76c3e5786c Merge pull request #111 from juribeparada/master
Adding LEDs selftest at start-up
2017-08-29 20:24:57 +01:00
Andy CA6JAU 793407fe16 Merge remote-tracking branch 'g4klx/master' 2017-08-29 14:52:24 -03:00
Andy CA6JAU 990bf2a16a Fix delay function for F767 2017-08-29 14:51:20 -03:00
Andy CA6JAU ea37f67b91 Adding conditional compilation for LED selftest 2017-08-29 14:39:16 -03:00
Andy CA6JAU a805652f48 Change the LED sequence 2017-08-29 08:48:20 -03:00
Andy CA6JAU eb4cd221b2 Changing LEDs sequence 2017-08-29 00:57:52 -03:00
Andy CA6JAU a244b86f36 Exclude PTT to avoid trigger the transmitter 2017-08-28 13:49:52 -03:00
Jonathan Naylor 56a12a61c2 Merge pull request #107 from phl0/fixYSF
Refactor variable initialization in YSFRX.h
2017-08-28 08:28:34 +01:00
phl0 595f38b796 Refactor variable initialization in YSFRX.h 2017-08-28 07:48:25 +02:00
Andy CA6JAU d6b7796c25 Merge remote-tracking branch 'g4klx/master' 2017-08-28 00:44:59 -03:00
Andy CA6JAU 70e1fd4264 Adding LEDs selftest at start-up 2017-08-28 00:43:24 -03:00
Jonathan Naylor 00bc8be152 Merge pull request #106 from juribeparada/master
Add support for STM32F767 (Nucleo-144 F767ZI)
2017-08-27 22:47:42 +01:00
Andy CA6JAU cce2cc3cfc Including F767 target into the Makefile 2017-08-27 16:28:08 -03:00
Andy CA6JAU 1f5a4f1ad7 Removing unnecessary “defined(STM32F4)” 2017-08-27 15:20:46 -03:00
Andy CA6JAU a60059bc90 Adding preliminary support for STM32F767 (Nucleo-144 F767ZI) 2017-08-24 22:24:27 -03:00
Andy CA6JAU 6c6b6c19fc Merge remote-tracking branch 'g4klx/master' 2017-08-24 21:22:45 -03:00
Jonathan Naylor 5b1075f0f7 Merge pull request #104 from juribeparada/master
Adding watchdog to host serial port
2017-08-20 15:41:04 +01:00
Andy CA6JAU 17007dd1e4 Merge remote-tracking branch 'g4klx/master' 2017-08-20 11:20:52 -03:00
Andy CA6JAU 8f317fd332 Adding watchdog to host serial port 2017-08-20 11:19:58 -03:00
Jonathan Naylor 1cee9e19c0 Add an adjustable transmit DC offset. 2017-08-20 12:07:05 +01:00
Andy CA6JAU 5b313b7cec Replace “GPIO_Speed_50MHz” definition for a better one “GPIO_Fast_Speed” (STM32F4) 2017-08-19 13:54:03 -03:00
Andy CA6JAU 8b52d372eb Merge remote-tracking branch 'g4klx/master' 2017-08-19 10:05:03 -03:00
Jonathan Naylor f4637585f6 Re-add the const qualifiers. 2017-08-18 10:57:47 +01:00
Jonathan Naylor 3e03fcff8e Fix the lengths in the DC removal code. 2017-08-18 10:42:41 +01:00
Jonathan Naylor 74682e7ac0 Optimise the DC offset code. 2017-08-18 10:27:23 +01:00
Andy CA6JAU 20cf355e7e Merge remote-tracking branch 'g4klx/master' 2017-08-13 17:17:25 -03:00
Jonathan Naylor 04ca97e5f8 Add enhancements suggested by IZ1MLT. 2017-08-13 18:51:09 +01:00
Jonathan Naylor 669acb99e8 Remove the DC blocker from DMR. 2017-07-31 21:54:26 +01:00
Jonathan Naylor ba81fa7396 Forgot this file. 2017-07-16 18:58:12 +01:00
Jonathan Naylor 8540964097 Remove any DC offset from before any further filtering takes place. 2017-07-16 18:57:15 +01:00
Jonathan Naylor 9d1ebc0f8f Small refactor. 2017-07-10 19:41:01 +01:00
Andy CA6JAU 786e57d043 Merge remote-tracking branch 'g4klx/master' 2017-07-09 16:57:37 -04:00
Jonathan Naylor 902b079de2 Merge pull request #100 from juribeparada/devel
DC estimator filter for all modes
2017-07-09 21:22:52 +01:00
Andy CA6JAU 54f54ab518 Remove unused variables 2017-07-09 15:02:30 -04:00
Andy CA6JAU f8d767913e Adding DC estimator filter for all modes 2017-07-06 00:51:46 -04:00
Jonathan Naylor 266db8bedb Merge pull request #99 from juribeparada/master
Workaround for stm32flash bug and STM32F446 Pi version
2017-07-04 20:03:28 +01:00
Andy CA6JAU 6c4496e034 Updating Coocox project file 2017-07-04 13:42:51 -04:00
Andy CA6JAU 8db83708ca Disabling default enabled SEND_RSSI_DATA and SERIAL_REPEATER for STM32F446 Pi version 2017-07-04 13:39:01 -04:00
Andy CA6JAU 7f45a0da83 Workaround for stm32flash bug and STM32F446 Pi version 2017-07-04 13:35:44 -04:00
Andy CA6JAU ce03ad4ab7 Merge remote-tracking branch 'g4klx/master' 2017-07-04 13:32:17 -04:00
Jonathan Naylor ae9e35ccad Merge pull request #98 from phl0/dev
Added some more description on pinouts of STM
2017-06-21 19:15:04 +01:00
phl0 9e5234539e Add pin number for STM32F4 discovery 2017-06-21 12:53:04 +02:00
phl0 dea7c714c0 Add pin numbers for morpho header 2017-06-21 12:44:53 +02:00
phl0 4690186812 Add pin numbers 2017-06-21 12:36:11 +02:00
Andy CA6JAU 399b6e1d85 Merge remote-tracking branch 'g4klx/master' 2017-06-18 10:01:50 -04:00
Jonathan Naylor c2ed9d4ae7 Merge pull request #97 from phl0/fixUpload
Fix Arduino Makefile to include GitVersion on upload
2017-06-06 12:08:31 +01:00
phl0 1dc23a4aa6 Fix Arduino Makefile to include GitVersion on upload 2017-06-06 10:50:53 +02:00
Jonathan Naylor 61b05dd5af Merge pull request #96 from N4IRS/master
Fix USART2 to USART1 after PR 94
2017-06-04 14:40:41 +01:00
Steve N4IRS 00a7f15011 Fix USART2 to USART1 after PR 94 2017-06-04 08:27:12 -04:00
Jonathan Naylor 8a5d5bc286 Merge pull request #93 from wojciechk8/mmdvm_pog_rev1
MMDVM_pog revision 1.0 changes
2017-06-03 17:19:38 +01:00
Jonathan Naylor c80c6a7797 Merge pull request #94 from sq6pog/master
Starting LED animation for MMDVM_pog board
2017-06-01 17:24:40 +01:00
SQ6POG 96c214c359 Added starting LED animation for MMDVM_pog board. 2017-06-01 17:05:29 +02:00
Wojciech Krutnik 6d5f098e41 Move host communication port from USART2 to USART1 2017-05-31 15:05:58 +02:00
Wojciech Krutnik e53aec348e Change port definition for bootloader (BL_PORT) in Makefile.CMSIS 2017-05-31 15:04:00 +02:00
Jonathan Naylor 9722c85585 Normalise the inverse-sinc lowpass filter to unity gain. 2017-05-05 08:10:36 +01:00
Jonathan Naylor 1a9c0d3ee7 Bump the version date. 2017-05-01 09:22:05 +01:00
Jonathan Naylor 7b68017411 Finish reverting to the master branch P25 filtering. 2017-04-29 10:08:38 +01:00
Jonathan Naylor a2cf35629b Revert "Testing low pass filter for P25 RX"
This reverts commit 68dfdf0c21.
2017-04-28 16:56:18 +01:00
Jonathan Naylor 2506690e98 Revert "Fix comments"
This reverts commit 3760404af9.
2017-04-28 16:55:55 +01:00
Jonathan Naylor 7e15d1ac70 Fix the TX FIFO write level calculation. 2017-04-26 08:18:00 +01:00
Jonathan Naylor 0fb75f974e Fix typo USART5 -> UART5 2017-04-25 08:03:10 +01:00
Jonathan Naylor 99ac6146d9 Add a ring buffer to the serial repeater. Uncompiled on the STM32
platform.
2017-04-24 18:02:36 +01:00
Jonathan Naylor 6161d298f7 Merge branch 'master' into c4fmdemod 2017-04-20 20:49:42 +01:00
Jonathan Naylor 7f181133c7 Merge pull request #90 from phl0/fixWindooze
Make Makefile compatible with builds on Windows
2017-04-18 06:09:50 +01:00
phl0 1d6ca99df9 Make Makefile compatible with builds on Windows 2017-04-17 23:01:19 +02:00
Jonathan Naylor baed701a6c Merge branch 'master' into c4fmdemod 2017-04-17 09:26:14 +01:00
Jonathan Naylor 8b31a53e4e Revert the DMR DMO TX changes. 2017-04-17 09:25:38 +01:00
Jonathan Naylor f6f1198873 Merge pull request #89 from juribeparada/master
Adding Pi Hat F446 support for stm32flash utility in Makefile
2017-04-16 19:57:08 +01:00
Andy CA6JAU 4b17bcd991 Changing default Makefile target to “nucleo” and adding “GitVersion.h” rule for all targets 2017-04-16 15:40:34 -03:00
Andy CA6JAU 852785b616 Workaround for Pi Hat F446 and stm32flash 2017-04-16 15:36:10 -03:00
Jonathan Naylor 1034670ac4 Merge pull request #88 from juribeparada/c4fmdemod
Testing low pass filter for P25 RX
2017-04-16 16:32:37 +01:00
Andy CA6JAU ff8bf96abb Adding GPIO sequence to enter serial bootloader mode (F446) 2017-04-16 11:48:41 -03:00
Andy CA6JAU edc53fc347 Adding Pi Hat F446 support for stm32flash utility in Makefile 2017-04-16 10:55:43 -03:00
Andy CA6JAU 3760404af9 Fix comments 2017-04-16 10:28:30 -03:00
Andy CA6JAU 68dfdf0c21 Testing low pass filter for P25 RX 2017-04-16 10:25:34 -03:00
Jonathan Naylor 5bd01645fa Merge pull request #87 from juribeparada/c4fmdemod
Fixing TX inverse SINC filter for P25, and change TX filters for gain=1
2017-04-15 18:18:19 +01:00
Andy CA6JAU f31cceac18 Fixing TX inverse SINC filter for P25, and change TX filters for gain=1 2017-04-15 13:44:00 -03:00
Andy CA6JAU 1b48c4de1c Merge remote-tracking branch 'g4klx/c4fmdemod' into c4fmdemod 2017-04-15 11:27:17 -03:00
Jonathan Naylor a6ed1e9667 Finish committing the last change. 2017-04-15 10:22:56 +01:00
Jonathan Naylor c7eb072d2f Add an extra flter for P25 RX. 2017-04-14 14:47:37 +01:00
Jonathan Naylor caa73c6c4a Remove the optional wide filters for C4FSK modes. 2017-04-14 14:22:47 +01:00
Jonathan Naylor 9386fb2e11 Make modem debugging a run-time parameter, not compile-time. 2017-04-14 14:19:00 +01:00
Jonathan Naylor 9c9b759db5 Merge pull request #86 from phl0/fixArduinoWarning
Remove Arduino compiler warning
2017-04-13 09:19:18 +01:00
phl0 cfb6e31e2f Remove Arduino compiler warning 2017-04-13 09:35:21 +02:00
Jonathan Naylor 4f6f519dc7 Merge pull request #84 from phl0/ArduinoMakefile
Arduino makefile
2017-04-13 05:43:42 +01:00
Jonathan Naylor fe8e8329ad Merge pull request #85 from juribeparada/master
Update the copyright message
2017-04-13 05:41:28 +01:00
Andy CA6JAU 38bcf1f4c4 Update the copyright message 2017-04-12 23:28:43 -03:00
Andy CA6JAU 6a1c06576b Reverting new RX filter for D-Star 2017-04-12 23:26:48 -03:00
Andy CA6JAU 27b3773f00 Update the copyright message 2017-04-12 23:00:54 -03:00
phl0 871c328914 Cleanup Makefile.Arduino 2017-04-12 23:00:39 +02:00
phl0 fa251afdcb Add define for default Makefile 2017-04-12 22:58:35 +02:00
phl0 27618658a9 Force rebuild of GitVersion.h 2017-04-12 22:43:02 +02:00
phl0 bb42bdc422 Add build/ dir for Arduino Makefile to .gitignore 2017-04-12 22:31:59 +02:00
phl0 f15fcc17ec Update Arduino Makefile to latest SAM version 2017-04-12 22:18:25 +02:00
phl0 59a9b3018f Add a define to Makefile 2017-04-12 21:57:32 +02:00
phl0 07b7801821 A little less verbose and add verfiy 2017-04-12 17:39:15 +02:00
phl0 3d430cbe44 Add first working version of Arduino Due Makefile 2017-04-12 17:35:01 +02:00
Andy CA6JAU fd27ffa464 Merge remote-tracking branch 'g4klx/master' 2017-04-12 09:00:36 -03:00
Jonathan Naylor 42517d691e Merge pull request #83 from phl0/GitID
Include Git ID in Modem description
2017-04-12 12:43:01 +01:00
phl0 53f51820fa Include GitID of Modem firmware 2017-04-12 11:51:28 +02:00
phl0 61a86b7f06 Make GITVERSION a macro and make before nucleo 2017-04-12 11:12:50 +02:00
phl0 696964a3a4 Add GitVersion.h to .gitignore 2017-04-12 10:15:47 +02:00
phl0 23228a0027 Add GitVersion.h to clean command 2017-04-12 10:15:05 +02:00
phl0 b4bef6e7c3 Add GitVersion.h to Makefile 2017-04-12 10:13:44 +02:00
Andy CA6JAU d2548f9e84 Merge remote-tracking branch 'g4klx/master' 2017-04-12 00:16:48 -03:00
Andy CA6JAU 4a01e9b3a1 Testing new RX filter for D-Star 2017-04-12 00:15:43 -03:00
Jonathan Naylor 8a245e7313 Update the copyright message. 2017-04-11 14:40:14 +01:00
Andy CA6JAU c132a58d2e Merge remote-tracking branch 'g4klx/master' 2017-04-10 22:05:58 -03:00
Jonathan Naylor 9cf91ddc7f Add a couple of extra CW characters. 2017-04-10 17:52:12 +01:00
Jonathan Naylor 016ed333ec Remove the unused sample dumping code. 2017-04-10 17:51:44 +01:00
Jonathan Naylor 453fb33b76 Revert the DMO sync bytes from MS to BS sourced. 2017-04-10 09:17:06 +01:00
Jonathan Naylor 9c1410eaae Merge pull request #81 from juribeparada/master
Improving DC filter for D-Star
2017-04-10 05:48:27 +01:00
Andy CA6JAU 5d1a54eee5 Improving DC filter for D-Star 2017-04-10 00:30:45 -03:00
Andy CA6JAU 4f516a827f Merge remote-tracking branch 'g4klx/master' 2017-04-09 16:29:15 -03:00
Jonathan Naylor acb2004843 Convert the DMO idle frame to have an MS data sync. 2017-04-09 20:04:16 +01:00
Jonathan Naylor 0f43670066 Small reformatting. 2017-04-09 20:00:00 +01:00
Jonathan Naylor ab3cdbc277 Merge pull request #80 from juribeparada/master
Filter for DC level estimation for D-Star
2017-04-09 19:53:42 +01:00
Andy CA6JAU 9efe38d825 Merge remote-tracking branch 'g4klx/master' into c4fmdemod 2017-04-09 15:02:57 -03:00
Andy CA6JAU 132cde0864 Merge remote-tracking branch 'g4klx/master' 2017-04-09 14:58:35 -03:00
Andy CA6JAU bc969ff5e5 Merge branch 'c4fmdemod' 2017-04-09 14:55:03 -03:00
Andy CA6JAU ee3f2a0e6d Filter for DC level estimation for D-Star 2017-04-09 14:35:08 -03:00
Jonathan Naylor 421031323d Bump the version date. 2017-04-06 18:11:23 +01:00
Jonathan Naylor 6118653053 Revert "Reduce the YSF deviations(s) by 10%."
This reverts commit 06ef230ad5.
2017-04-06 18:08:47 +01:00
Andy CA6JAU 1a5bc9cf8c Merge remote-tracking branch 'g4klx/c4fmdemod' into c4fmdemod 2017-04-05 21:21:09 -03:00
Jonathan Naylor 06ef230ad5 Reduce the YSF deviations(s) by 10%. 2017-04-05 14:24:29 +01:00
Jonathan Naylor 9d4779e4c3 Put idle into the second DMO slot instead of the repeat of the data. MD380/390 bug workaround. 2017-04-05 14:19:25 +01:00
Jonathan Naylor d5531177f2 Merge pull request #76 from juribeparada/c4fmdemod
Adding conditional compilation for Arduino 1.6.7 fix
2017-04-03 05:02:51 +01:00
Andy CA6JAU f2c50083d8 Adding conditional compilation for Arduino 1.6.7 fix 2017-04-02 22:17:09 -03:00
Jonathan Naylor 838d813ab9 Merge pull request #75 from juribeparada/c4fmdemod
New filter for D-Star, BT=0.35
2017-04-02 22:48:06 +01:00
Andy CA6JAU dffc6f0a5a New filter for D-Star, BT=0.35 2017-04-02 18:03:36 -03:00
Andy CA6JAU 7a042c10ad Better fix for Arduino IDE compilation error, now including STM32F4 2017-04-02 18:02:33 -03:00
Jonathan Naylor 0c44b8ca25 Merge pull request #74 from juribeparada/c4fmdemod
Fix for Arduino 1.6 compilation error
2017-04-02 21:14:55 +01:00
Andy CA6JAU 6f29fe62b1 Fix for Arduino 1.6 compilation error 2017-04-02 16:48:50 -03:00
Andy CA6JAU 937c0b8b97 Merge remote-tracking branch 'g4klx/c4fmdemod' into c4fmdemod 2017-04-02 15:40:55 -03:00
Andy CA6JAU 941d77bd51 Merge remote-tracking branch 'g4klx/master' 2017-04-02 14:22:57 -03:00
Jonathan Naylor 6a0fa19c07 Merge pull request #73 from juribeparada/c4fmdemod
New deviation values for YSF and P25
2017-04-02 18:04:00 +01:00
Jonathan Naylor a14ebca9e0 Merge branch 'master' into c4fmdemod 2017-04-02 18:02:17 +01:00
Andy CA6JAU 61b4093aec Merge remote-tracking branch 'g4klx/c4fmdemod' into c4fmdemod 2017-04-02 13:58:15 -03:00
Andy CA6JAU 555197b0a2 New deviation value for YSF 2017-04-02 13:49:39 -03:00
Andy CA6JAU bb6a554919 New deviation values for P25 (not tested) 2017-04-02 13:49:39 -03:00
Jonathan Naylor c0941c4856 Add TX Delay buffer protection. 2017-04-02 13:48:40 +01:00
Jonathan Naylor e93b264d9c Merge pull request #72 from juribeparada/c4fmdemod
Compensate DMR deviation to match old adjustments
2017-04-02 06:20:26 +01:00
Andy CA6JAU fcdbb8cda0 Compensate DMR deviation to match old adjustments (K=0.904) 2017-04-01 21:52:02 -03:00
Jonathan Naylor a4ff8920e5 Merge pull request #71 from juribeparada/c4fmdemod
New serial port buffer size for STM32F4
2017-04-02 00:25:31 +01:00
Andy CA6JAU db1c01f4dc New serial port buffer size for STM32F4 2017-04-01 15:04:05 -03:00
Andy CA6JAU ab50521f74 Testing new serial port buffer size for STM32F4 2017-04-01 11:52:34 -03:00
Jonathan Naylor 5843ca0e3d Merge pull request #70 from juribeparada/c4fmdemod
Using CMSIS FIR interpolator for all modulators
2017-04-01 08:42:07 +01:00
Andy CA6JAU 6b0868b8f2 Merge branch 'c4fmdemod' of https://github.com/juribeparada/MMDVM into c4fmdemod 2017-04-01 01:44:23 -03:00
Andy CA6JAU a49871cd8b Using CMSIS FIR interpolator for all modulators 2017-04-01 01:29:35 -03:00
Andy CA6JAU 78f5d34373 Using CMSIS FIR interpolator for all modulators 2017-04-01 01:16:56 -03:00
Jonathan Naylor 9bcaba0419 Change the start sync sequence. 2017-03-31 08:33:01 +01:00
Jonathan Naylor a25b634366 Merge pull request #68 from wojciechk8/mmdvm_pog
Adding support for STM32F1 MCU and MMDVM_pog board
2017-03-31 08:20:33 +01:00
Jonathan Naylor 4039f576ae Use the DMR changes from Andy in the DMR DMO TX. 2017-03-31 08:16:13 +01:00
Jonathan Naylor 03aa405b41 Merge pull request #69 from juribeparada/c4fmdemod
Fixing symbol generation for all modes (zero padding for FIR interpolation)
2017-03-31 08:14:52 +01:00
Andy CA6JAU 546243eec6 Fixing symbol generation (zero padding for FIR interpolation) 2017-03-31 01:26:07 -03:00
Andy CA6JAU a033ee66fd Restoring original TX filter for YSF, fixing symbol generation (zero padding for FIR interpolation) 2017-03-31 01:25:45 -03:00
Wojciech Krutnik 70dfb0964e Corrected Makefile.CMSIS and IOSTM_CMSIS.cpp to enable compilation
without errors
2017-03-31 01:25:24 +02:00
Wojciech Krutnik ab09848afd Updated .gitignore 2017-03-31 00:52:24 +02:00
Wojciech Krutnik ed7b57d618 Added Makefile for STM32F1 with CMSIS 2017-03-31 00:52:24 +02:00
Wojciech Krutnik e8010137f7 Added STM32F1 startup code 2017-03-31 00:52:24 +02:00
Wojciech Krutnik c2d5c31db1 Added includes and definitions to support STM32F1 2017-03-31 00:52:24 +02:00
Wojciech Krutnik 5f2375e99e Added STM32F1 support to Serial module using CMSIS driver 2017-03-31 00:52:24 +02:00
Wojciech Krutnik fd56870d22 Added STM32F1 and mmdvm_pog board support to IO module using CMSIS driver 2017-03-31 00:51:50 +02:00
Wojciech Krutnik 5bc21fa192 Added mmdvm_pog board definition to Config.h 2017-03-31 00:19:01 +02:00
Jonathan Naylor 33293258f3 Merge pull request #67 from juribeparada/c4fmdemod
New YSF filter for TX
2017-03-30 07:54:46 +01:00
Andy CA6JAU aee9cac546 New YSF filter for TX 2017-03-30 01:09:03 -03:00
Jonathan Naylor c9b553bc2e Follow the ETSI standard for DMO operation. 2017-03-29 20:36:02 +01:00
Jonathan Naylor 12dc9183da Add YSF low deviation mode. 2017-03-23 20:27:23 +00:00
Jonathan Naylor 8c38341c17 Merge branch 'master' into c4fmdemod 2017-03-21 18:31:59 +00:00
Jonathan Naylor 418b63b9ca Update copyright date. 2017-03-20 07:57:25 +00:00
Jonathan Naylor e697a91710 Revert the DMR DMO transmitter changes. 2017-03-19 09:35:46 +00:00
Jonathan Naylor e04057a5b5 Update P25 raised cosine filter coefficients. 2017-03-18 11:35:31 +00:00
Jonathan Naylor e17d771d41 Reduce the number of diffs. 2017-03-18 09:22:55 +00:00
Jonathan Naylor 38516074dd Forgot to set the at variable within the CACH. 2017-03-13 08:24:35 +00:00
Jonathan Naylor 3814d4243c Add extra idle frames at the start of a DMR DMO transmission. 2017-03-12 18:36:41 +00:00
Jonathan Naylor bcbfb66131 Roll back the YSF changes and simplify the P25 code. 2017-03-10 18:18:36 +00:00
Jonathan Naylor 9560c77358 Merge branch 'master' into c4fmdemod 2017-03-10 17:47:50 +00:00
Jonathan Naylor 785cb5584b Merge pull request #66 from m1geo/master
Add compilation timestamp to hardware description varible sent in ::getVersion()
2017-03-10 17:17:31 +00:00
George Smart 917b303a0f Added compilation timestamp to hardware description varible sent in ::getVersion() 2017-03-09 23:32:46 +00:00
George Smart 80d659d7d0 Merge pull request #1 from g4klx/master
Merge with KLX Master Repo
2017-03-09 22:40:38 +00:00
Jonathan Naylor 90111dc43d Use the Raised Cosine filter on YSF TX. 2017-03-07 20:48:39 +00:00
Jonathan Naylor 9110f5404f Add the Raised Cosine filter to P25 RX and change YSF to use the Raised
Cosine filter on RX also.
2017-03-07 20:44:41 +00:00
Jonathan Naylor df1210eaea Remove the OscOffset parameter. 2017-03-07 20:41:54 +00:00
Jonathan Naylor a9b761d1dc Change the P25 TX and RX filters and add a DMR TX data holdoff counter. 2017-03-06 20:42:37 +00:00
Jonathan Naylor 8c970b26db Change size of space in transmit routines. 2017-03-06 20:36:44 +00:00
Jonathan Naylor d89b68ff76 Bump the version date. 2017-03-03 15:00:19 +00:00
Jonathan Naylor 7fafd762d2 Improve frame dumping capabilities. 2017-02-26 12:33:59 +00:00
Jonathan Naylor a6affb765e Remove the sync sample dumping. 2017-02-21 17:51:09 +00:00
Jonathan Naylor 2f9eb3523d Add full frame dumping. 2017-02-20 21:35:23 +00:00
Jonathan Naylor 3b5e1afb54 Merge branch 'master' into c4fmdemod 2017-02-18 11:19:52 +00:00
Jonathan Naylor 8b019d49fd Merge pull request #65 from juribeparada/master
Fixing RSSI raw value position in buffer (YSF and P25)
2017-02-18 06:21:12 +00:00
Andy CA6JAU d92a00ae6e Fixing RSSI raw value position in buffer (YSF and P25) 2017-02-17 20:09:23 -03:00
Andy CA6JAU b83d13fe3a Merge remote-tracking branch 'g4klx/master' 2017-02-16 10:44:39 -03:00
Jonathan Naylor bc6c650973 Improve YSF and P25 receive BER. 2017-02-12 18:44:45 +00:00
Jonathan Naylor 1bb474dfef Add new interpolation for most modes and start positioning for P25 and YSF. 2017-02-06 21:02:45 +00:00
Jonathan Naylor 18ec4bafb6 Merge branch 'master' into c4fmdemod 2017-02-06 20:52:33 +00:00
Jonathan Naylor b2c490e0bd Bump the version date. 2017-02-06 20:52:06 +00:00
Jonathan Naylor 4221ac45b1 Improve the P25 sync positioning. 2017-02-05 19:33:52 +00:00
Jonathan Naylor ec5100bf6f Alter the P25 HDR start pointer calculation. 2017-02-03 12:01:12 +00:00
Jonathan Naylor ac4249bbb1 Add working sync sample dumping for DMR, P25 and YSF. 2017-02-02 20:13:28 +00:00
Jonathan Naylor f3a3132a6c Add sync dumping and improve YSF and P25. 2017-01-31 20:36:31 +00:00
Jonathan Naylor 4bc0f36b49 Begin P25 Header detection. 2017-01-29 19:28:27 +00:00
Jonathan Naylor 9d1fbcfc73 Update P25 to match YSF demodulator, work in progress. 2017-01-29 19:08:44 +00:00
Jonathan Naylor 609c2ead53 Revert the DMR changes. 2017-01-29 18:51:33 +00:00
Jonathan Naylor 37daa04a6c Merge branch 'master' into c4fmdemod 2017-01-28 20:07:00 +00:00
Jonathan Naylor 20a4cf0378 Merge pull request #63 from juribeparada/master
Adding conditional compilation
2017-01-28 13:57:57 +00:00
Andy CA6JAU 693f517aec Adding conditional compilation 2017-01-28 10:18:10 -03:00
Andy CA6JAU 4549027e95 Merge remote-tracking branch 'g4klx/master' 2017-01-28 09:46:53 -03:00
Jonathan Naylor b3a1961279 Merge branch 'master' into c4fmdemod 2017-01-26 20:30:49 +00:00
Jonathan Naylor afae6e552c Merge pull request #62 from phl0/MODEpins
Mode pins
2017-01-22 12:24:24 +00:00
phl0 5ee6a0d6db Correct comments to align with changed pins 2017-01-22 12:22:40 +01:00
phl0 49e0d13967 Redefine Mode pins for D-Star and DMR 2017-01-22 00:46:12 +01:00
Jonathan Naylor 53067d36d0 More averaging of the centre and threshold. 2017-01-21 18:57:39 +00:00
Jonathan Naylor a5568efd51 Merge branch 'master' into c4fmdemod 2017-01-21 18:37:46 +00:00
Jonathan Naylor d4d1f8282b Tweaks to the new YSF demodulator. 2017-01-21 18:37:30 +00:00
phl0 79b0b141a2 Add support for external mode pins on F0DEI board 2017-01-20 17:34:32 +01:00
Jonathan Naylor 850978a954 Merge pull request #61 from phl0/gitignore
Add gitignore to irgnore object files and STM lib
2017-01-20 16:03:57 +00:00
phl0 f97e53f1eb Add gitignore to irgnore object files and STM lib 2017-01-20 16:34:25 +01:00
Jonathan Naylor dfd2a4db38 Merge pull request #60 from phl0/devel
Refactored STM code concerning whitespace
2017-01-20 06:13:59 +00:00
phl0 eab91cca3a Correct typo 2017-01-19 21:54:21 +01:00
phl0 1e7c06de45 Refactor SerialSTM.cpp 2017-01-19 21:50:06 +01:00
Jonathan Naylor b15933bf8a Cleanups but still untested. 2017-01-19 19:59:01 +00:00
phl0 df5ab3de60 Refactor IOSTM.cpp 2017-01-19 14:07:30 +01:00
Jonathan Naylor 9a7b07027a New demodulators for C4FM modes. 2017-01-17 20:05:20 +00:00
Jonathan Naylor 8b13a3c8a6 Merge pull request #59 from juribeparada/master
New pin definitions for STM32F446RE board, enabling Arduino header
2017-01-11 09:11:37 +00:00
Andy CA6JAU 1ce71bcd62 New pin definitions for serial port Nucleo-64 STM32F446RE board, Arduino header 2017-01-11 00:27:27 -03:00
Andy CA6JAU ed13addd3d Merge remote-tracking branch 'g4klx/master' 2017-01-10 23:56:31 -03:00
Jonathan Naylor 3e937a71d9 Average the RSSI value for all modes. 2017-01-10 19:20:16 +00:00
Andy CA6JAU a59da0ebd2 Adding more flexibility for STM32F4 pin definitions 2017-01-10 01:38:56 -03:00
Andy CA6JAU 33f4d35e2b Adding new pin definitions for Nucleo-64 STM32F446RE board 2017-01-10 00:47:45 -03:00
Andy CA6JAU 048888f45b Merge remote-tracking branch 'g4klx/master' 2017-01-08 19:18:26 -03:00
Jonathan Naylor 57fde3afcc Add RSSI reporting for all modes. 2017-01-05 18:59:15 +00:00
Jonathan Naylor 8777c2b29c Update README.md 2017-01-03 16:36:34 +00:00
Jonathan Naylor 8330ed7dcf Merge pull request #56 from g4eml/master
Fix crash in DMR DMO Mode on Teensy
2017-01-01 15:20:47 +00:00
g4eml 9f47e67630 Fix crash in DMR DMO Mode
Modem was crashing on Teensy when running in DMO mode. Crashed as soon as Tx started. Traced to exceeding the bounds of m_poBuffer during the txdelay phase.
 m_poBuffer was dimensioned to 80 but m_txdelay could be 600 to 1200 so a massive overwrite was happening.
Surprisingly this didn't crash on the Due only on the Teensy.
2017-01-01 14:22:49 +00:00
Andy CA6JAU d0f320a862 Merge remote-tracking branch 'g4klx/master' 2016-12-31 12:20:47 -03:00
Jonathan Naylor a05eaee855 Fix RSSI compile. 2016-12-30 13:48:55 +00:00
Jonathan Naylor 4b5f496a0c Bump the version date. 2016-12-30 11:35:39 +00:00
Jonathan Naylor fca53dc67e Small tweaks. 2016-12-30 11:34:31 +00:00
Jonathan Naylor 52fbd4f6ce Merge pull request #53 from juribeparada/master
Adding RSSI samples averaging
2016-12-29 09:32:06 +00:00
Andy CA6JAU d22c86e4d8 Fixing RSSI buffer length 2016-12-29 01:08:31 -03:00
Andy CA6JAU cc1b6d1367 Optimizing RSSI averaging 2016-12-29 00:51:14 -03:00
Andy CA6JAU 2ff955631f Adding #define constants in the RSSI average code 2016-12-29 00:36:45 -03:00
Andy CA6JAU f66e32fbb4 Merge remote-tracking branch 'g4klx/master' 2016-12-28 22:05:06 -03:00
Jonathan Naylor 33527dd3e9 Add the RSSI calibration mode. 2016-12-28 18:07:31 +00:00
Andy CA6JAU 442dbe0b6a Adding RSSI samples averaging 2016-12-27 00:40:14 -03:00
Andy CA6JAU fc200c4cd7 Merge remote-tracking branch 'g4klx/master' 2016-12-26 14:14:02 -03:00
Jonathan Naylor 7266f5c53b Merge pull request #52 from g4eml/master
Change ADC1 to reduce number of interrupts.
2016-12-22 22:58:01 +00:00
g4eml 957d0d8d34 Change ADC1 to reduce number of interrupts.
Disable interrupts for ADC1. 
Every time ADC0 interrupts (24Khz) read the current conversion from ADC1 and software trigger a new one. 
This way there will always be an ADC1 conversion available whenever ADC0 interrupts.
2016-12-22 22:27:10 +00:00
Jonathan Naylor c69c573000 Merge pull request #51 from g4eml/master
Adjust ADC pre-trigger setting for external TCXO
2016-12-22 18:22:16 +00:00
g4eml cb30a8d357 Adjust ADC pre-trigger setting for external TCXO
External TCXO was not working with Pre-Trigger set to B.
This change sets it to A which appears to work.
2016-12-22 16:35:35 +00:00
Jonathan Naylor 38f6d7d9d8 Update DAC reference comment. 2016-12-21 14:01:18 +00:00
Jonathan Naylor 461e7c942e Add RSSI input for the ZUM board also. 2016-12-21 08:46:17 +00:00
Jonathan Naylor 773cda818d Merge pull request #49 from sq6pog/nth_rssi
RSSI readout support for NTH board @Arduino Due
2016-12-21 08:43:00 +00:00
Jonathan Naylor 625a6c1a79 Merge pull request #50 from g4eml/master
Update IOTeensy.cpp
2016-12-21 08:41:13 +00:00
Paweł Gomułka 414f3eb193 typo :/ 2016-12-21 01:57:58 +01:00
Paweł Gomułka bef0d9cfd6 Added missing conditions for preprocessor 2016-12-21 01:55:35 +01:00
Andy CA6JAU 1a270642cd Merge remote-tracking branch 'g4klx/master' 2016-12-20 20:27:16 -03:00
g4eml 75eccb751e Update IOTeensy.cpp
Switch ADCs to External Reference. (3v3 on Teensy)
2016-12-20 20:48:15 +00:00
Paweł Gomułka 2c76d67098 RSSI readout support for NTH board @Arduino Due 2016-12-20 20:32:54 +01:00
Jonathan Naylor 0585d817cb Change Teensy RSSI input pins. 2016-12-20 14:21:36 +00:00
Jonathan Naylor 5d0d2d0bd9 Fix calibration setting. 2016-12-20 08:42:56 +00:00
212 changed files with 8643 additions and 121949 deletions
+7
View File
@@ -0,0 +1,7 @@
.pio
.vscode
*.o
obj/
bin/
GitVersion.h
build/
+6
View File
@@ -0,0 +1,6 @@
[submodule "STM32F4XX_Lib"]
path = STM32F4XX_Lib
url = https://github.com/juribeparada/STM32F4XX_Lib.git
[submodule "STM32F7XX_Lib"]
path = STM32F7XX_Lib
url = https://github.com/juribeparada/STM32F7XX_Lib.git
+8 -8
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2009-2017 by Jonathan Naylor G4KLX * Copyright (C) 2009-2017,2020 by Jonathan Naylor G4KLX
* Copyright (C) 2016 by Colin Durbridge G4EML * Copyright (C) 2016 by Colin Durbridge G4EML
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
@@ -22,12 +22,12 @@
#include "CWIdTX.h" #include "CWIdTX.h"
q15_t TONE[] = { q15_t TONE[] = {
0, 261, 518, 765, 1000, 1218, 1414, 1587, 1732, 1848, 1932, 1983, 2000, 1983, 1932, 1848, 1732, 1587, 1414, 1218, 1000, 765, 518, 261, 0, -261, -518, -765, -1000, -1218, -1414, 0, 518, 1000, 1414, 1732, 1932, 2000, 1932, 1732, 1414, 1000, 518, 0, -518, -1000, -1414, -1732, -1932, -2000, -1932, -1732, -1414, -1000, -518};
-1587, -1732, -1848, -1932, -1983, -2000, -1983, -1932, -1848, -1732, -1587, -1414, -1218, -1000, -765, -518, -261};
q15_t SILENCE[] = {
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
const uint8_t CYCLE_LENGTH = 48U; q15_t SILENCE[] = {
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
const uint8_t CYCLE_LENGTH = 24U;
const uint8_t DOT_LENGTH = 50U; const uint8_t DOT_LENGTH = 50U;
@@ -77,6 +77,7 @@ const struct {
{',', 0xEEAEE000U, 22U}, {',', 0xEEAEE000U, 22U},
{'-', 0xEAAE0000U, 18U}, {'-', 0xEAAE0000U, 18U},
{'=', 0xEAB80000U, 16U}, {'=', 0xEAB80000U, 16U},
{'.', 0xBAEB8000U, 20U},
{' ', 0x00000000U, 4U}, {' ', 0x00000000U, 4U},
{0U, 0x00000000U, 0U} {0U, 0x00000000U, 0U}
}; };
@@ -124,7 +125,7 @@ void CCWIdTX::process()
} }
} }
uint8_t CCWIdTX::write(const uint8_t* data, uint8_t length) uint8_t CCWIdTX::write(const uint8_t* data, uint16_t length)
{ {
::memset(m_poBuffer, 0x00U, 1000U * sizeof(uint8_t)); ::memset(m_poBuffer, 0x00U, 1000U * sizeof(uint8_t));
@@ -170,4 +171,3 @@ void CCWIdTX::reset()
m_poPtr = 0U; m_poPtr = 0U;
m_n = 0U; m_n = 0U;
} }
+2 -2
View File
@@ -1,6 +1,6 @@
/* /*
* Copyright (C) 2009-2015 by Jonathan Naylor G4KLX * Copyright (C) 2009-2015 by Jonathan Naylor G4KLX
* Copyright (C) 2016 by Colin Durbridge G4EML * Copyright (C) 2016,2020 by Colin Durbridge G4EML
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
@@ -28,7 +28,7 @@ public:
void process(); void process();
uint8_t write(const uint8_t* data, uint8_t length); uint8_t write(const uint8_t* data, uint16_t length);
void reset(); void reset();
+7 -2
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2009-2015 by Jonathan Naylor G4KLX * Copyright (C) 2009-2015,2020 by Jonathan Naylor G4KLX
* Copyright (C) 2016 by Colin Durbridge G4EML * Copyright (C) 2016 by Colin Durbridge G4EML
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
@@ -18,6 +18,9 @@
*/ */
#include "Config.h" #include "Config.h"
#if defined(MODE_DMR)
#include "Globals.h" #include "Globals.h"
#include "CalDMR.h" #include "CalDMR.h"
@@ -208,7 +211,7 @@ void CCalDMR::dmrdmo1k()
} }
} }
uint8_t CCalDMR::write(const uint8_t* data, uint8_t length) uint8_t CCalDMR::write(const uint8_t* data, uint16_t length)
{ {
if (length != 1U) if (length != 1U)
return 4U; return 4U;
@@ -221,3 +224,5 @@ uint8_t CCalDMR::write(const uint8_t* data, uint8_t length)
return 0U; return 0U;
} }
#endif
+8 -3
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2009-2015 by Jonathan Naylor G4KLX * Copyright (C) 2009-2015,2020 by Jonathan Naylor G4KLX
* Copyright (C) 2016 by Colin Durbridge G4EML * Copyright (C) 2016 by Colin Durbridge G4EML
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
@@ -17,10 +17,13 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/ */
#include "Config.h"
#if defined(MODE_DMR)
#if !defined(CALDMR_H) #if !defined(CALDMR_H)
#define CALDMR_H #define CALDMR_H
#include "Config.h"
#include "DMRDefines.h" #include "DMRDefines.h"
enum DMRCAL1K { enum DMRCAL1K {
@@ -41,7 +44,7 @@ public:
void createData1k(uint8_t n); void createData1k(uint8_t n);
void createDataDMO1k(uint8_t n); void createDataDMO1k(uint8_t n);
uint8_t write(const uint8_t* data, uint8_t length); uint8_t write(const uint8_t* data, uint16_t length);
private: private:
bool m_transmit; bool m_transmit;
@@ -53,3 +56,5 @@ private:
#endif #endif
#endif
+6 -1
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2009-2016 by Jonathan Naylor G4KLX * Copyright (C) 2009-2016,2020 by Jonathan Naylor G4KLX
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
@@ -17,6 +17,9 @@
*/ */
#include "Config.h" #include "Config.h"
#if defined(MODE_DSTAR)
#include "Globals.h" #include "Globals.h"
#include "CalDStarRX.h" #include "CalDStarRX.h"
#include "Utils.h" #include "Utils.h"
@@ -126,3 +129,5 @@ void CCalDStarRX::process(q15_t value)
} }
} }
#endif
+7 -2
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2015,2016 by Jonathan Naylor G4KLX * Copyright (C) 2015,2016,2020 by Jonathan Naylor G4KLX
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
@@ -16,10 +16,13 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/ */
#include "Config.h"
#if defined(MODE_DSTAR)
#if !defined(CALDSTARRX_H) #if !defined(CALDSTARRX_H)
#define CALDSTARRX_H #define CALDSTARRX_H
#include "Config.h"
#include "DStarDefines.h" #include "DStarDefines.h"
class CCalDStarRX { class CCalDStarRX {
@@ -40,3 +43,5 @@ private:
#endif #endif
#endif
+7 -2
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2009-2016 by Jonathan Naylor G4KLX * Copyright (C) 2009-2016,2020 by Jonathan Naylor G4KLX
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
@@ -17,6 +17,9 @@
*/ */
#include "Config.h" #include "Config.h"
#if defined(MODE_DSTAR)
#include "Globals.h" #include "Globals.h"
#include "CalDStarTX.h" #include "CalDStarTX.h"
@@ -162,7 +165,7 @@ void CCalDStarTX::process()
m_count = (m_count + 1U) % (30U * 21U); m_count = (m_count + 1U) % (30U * 21U);
} }
uint8_t CCalDStarTX::write(const uint8_t* data, uint8_t length) uint8_t CCalDStarTX::write(const uint8_t* data, uint16_t length)
{ {
if (length != 1U) if (length != 1U)
return 4U; return 4U;
@@ -181,3 +184,5 @@ uint8_t CCalDStarTX::write(const uint8_t* data, uint8_t length)
return 0U; return 0U;
} }
#endif
+8 -3
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2015,2016 by Jonathan Naylor G4KLX * Copyright (C) 2015,2016,2020 by Jonathan Naylor G4KLX
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
@@ -16,17 +16,20 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/ */
#include "Config.h"
#if defined(MODE_DSTAR)
#if !defined(CALDSTARTX_H) #if !defined(CALDSTARTX_H)
#define CALDSTARTX_H #define CALDSTARTX_H
#include "Config.h"
#include "DStarDefines.h" #include "DStarDefines.h"
class CCalDStarTX { class CCalDStarTX {
public: public:
CCalDStarTX(); CCalDStarTX();
uint8_t write(const uint8_t* data, uint8_t length); uint8_t write(const uint8_t* data, uint16_t length);
void process(); void process();
@@ -37,3 +40,5 @@ private:
#endif #endif
#endif
+133
View File
@@ -0,0 +1,133 @@
/*
* Copyright (C) 2009-2015,2020 by Jonathan Naylor G4KLX
* Copyright (C) 2016 by Colin Durbridge G4EML
* Copyright (C) 2020 by Phil Taylor M0VSE
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "Config.h"
#if defined(MODE_FM)
#include "Globals.h"
#include "CalFM.h"
const struct TONE_TABLE {
uint16_t frequency;
uint16_t length;
q31_t increment;
} TONE_TABLE_DATA[] = {
{2495U, 10U, 223248821},
{2079U, 12U, 186025772},
{1633U, 15U, 146118367},
{1247U, 19U, 111579672},
{1039U, 23U, 93012886},
{956U, 25U, 85541432}};
const uint8_t TONE_TABLE_DATA_LEN = 6U;
CCalFM::CCalFM() :
m_frequency(0),
m_length(0),
m_tone(NULL),
m_level(128 * 12),
m_transmit(false),
m_audioSeq(0),
m_lastState(STATE_IDLE)
{
}
void CCalFM::process()
{
const TONE_TABLE* entry = NULL;
if (m_modemState != m_lastState)
{
switch (m_modemState) {
case STATE_FMCAL10K:
m_frequency = 956U;
break;
case STATE_FMCAL12K:
m_frequency = 1039U;
break;
case STATE_FMCAL15K:
m_frequency = 1247U;
break;
case STATE_FMCAL20K:
m_frequency = 1633U;
break;
case STATE_FMCAL25K:
m_frequency = 2079U;
break;
case STATE_FMCAL30K:
m_frequency = 2495U;
break;
default:
m_frequency = 0U;
break;
}
for (uint8_t i = 0U; i < TONE_TABLE_DATA_LEN; i++) {
if (TONE_TABLE_DATA[i].frequency == m_frequency) {
entry = TONE_TABLE_DATA + i;
break;
}
}
if (entry == NULL)
return;
m_length = entry->length;
delete[] m_tone;
m_tone = new q15_t[m_length];
q31_t arg = 0;
for (uint16_t i = 0U; i < m_length; i++) {
q63_t value = ::arm_sin_q31(arg) * q63_t(m_level);
m_tone[i] = q15_t(__SSAT((value >> 31), 16));
arg += entry->increment;
}
m_lastState=m_modemState;
}
if (m_transmit)
{
uint16_t space = io.getSpace();
while (space > m_length)
{
io.write(m_modemState,m_tone,m_length);
space -= m_length;
}
}
}
uint8_t CCalFM::write(const uint8_t* data, uint16_t length)
{
if (length != 1U)
return 4U;
m_transmit = data[0U] == 1U;
return 0U;
}
#endif
+55
View File
@@ -0,0 +1,55 @@
/*
* Copyright (C) 2009-2015,2020 by Jonathan Naylor G4KLX
* Copyright (C) 2016 by Colin Durbridge G4EML
* Copyright (C) 2020 by Phil Taylor M0VSE
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "Config.h"
#if defined(MODE_FM)
#if !defined(CALFM_H)
#define CALFM_H
class CCalFM {
public:
CCalFM();
void process();
void fm10kcal();
void fm12k5cal();
void fm15kcal();
void fm20kcal();
void fm25kcal();
void fm30kcal();
uint8_t write(const uint8_t* data, uint16_t length);
private:
uint16_t m_frequency;
uint16_t m_length;
q15_t* m_tone;
q15_t m_level;
bool m_transmit;
uint8_t m_audioSeq;
uint8_t m_lastState;
};
#endif
#endif
+7 -1
View File
@@ -1,5 +1,6 @@
/* /*
* Copyright (C) 2018 by Andy Uribe CA6JAU * Copyright (C) 2018 by Andy Uribe CA6JAU
* Copyright (C) 2020 by Jonathan Naylor G4KLX
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
@@ -17,6 +18,9 @@
*/ */
#include "Config.h" #include "Config.h"
#if defined(MODE_NXDN)
#include "Globals.h" #include "Globals.h"
#include "CalNXDN.h" #include "CalNXDN.h"
@@ -79,7 +83,7 @@ void CCalNXDN::process()
} }
} }
uint8_t CCalNXDN::write(const uint8_t* data, uint8_t length) uint8_t CCalNXDN::write(const uint8_t* data, uint16_t length)
{ {
if (length != 1U) if (length != 1U)
return 4U; return 4U;
@@ -92,3 +96,5 @@ uint8_t CCalNXDN::write(const uint8_t* data, uint8_t length)
return 0U; return 0U;
} }
#endif
+8 -3
View File
@@ -1,5 +1,6 @@
/* /*
* Copyright (C) 2018 by Andy Uribe CA6JAU * Copyright (C) 2018 by Andy Uribe CA6JAU
* Copyright (C) 2020 by Jonathan Naylor G4KLX
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
@@ -16,11 +17,13 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/ */
#include "Config.h"
#if defined(MODE_NXDN)
#if !defined(CALNXDN_H) #if !defined(CALNXDN_H)
#define CALNXDN_H #define CALNXDN_H
#include "Config.h"
enum NXDNCAL1K { enum NXDNCAL1K {
NXDNCAL1K_IDLE, NXDNCAL1K_IDLE,
NXDNCAL1K_TX NXDNCAL1K_TX
@@ -32,7 +35,7 @@ public:
void process(); void process();
uint8_t write(const uint8_t* data, uint8_t length); uint8_t write(const uint8_t* data, uint16_t length);
private: private:
bool m_transmit; bool m_transmit;
@@ -42,3 +45,5 @@ private:
#endif #endif
#endif
+7 -1
View File
@@ -1,5 +1,6 @@
/* /*
* Copyright (C) 2018 by Andy Uribe CA6JAU * Copyright (C) 2018 by Andy Uribe CA6JAU
* Copyright (C) 2020 by Jonathan Naylor G4KLX
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
@@ -17,6 +18,9 @@
*/ */
#include "Config.h" #include "Config.h"
#if defined(MODE_P25)
#include "Globals.h" #include "Globals.h"
#include "CalP25.h" #include "CalP25.h"
@@ -82,7 +86,7 @@ void CCalP25::process()
} }
} }
uint8_t CCalP25::write(const uint8_t* data, uint8_t length) uint8_t CCalP25::write(const uint8_t* data, uint16_t length)
{ {
if (length != 1U) if (length != 1U)
return 4U; return 4U;
@@ -95,3 +99,5 @@ uint8_t CCalP25::write(const uint8_t* data, uint8_t length)
return 0U; return 0U;
} }
#endif
+8 -2
View File
@@ -1,5 +1,6 @@
/* /*
* Copyright (C) 2018 by Andy Uribe CA6JAU * Copyright (C) 2018 by Andy Uribe CA6JAU
* Copyright (C) 2020 by Jonathan Naylor G4KLX
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
@@ -16,10 +17,13 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/ */
#include "Config.h"
#if defined(MODE_P25)
#if !defined(CALP25_H) #if !defined(CALP25_H)
#define CALP25_H #define CALP25_H
#include "Config.h"
#include "P25Defines.h" #include "P25Defines.h"
enum P25CAL1K { enum P25CAL1K {
@@ -34,7 +38,7 @@ public:
void process(); void process();
uint8_t write(const uint8_t* data, uint8_t length); uint8_t write(const uint8_t* data, uint16_t length);
private: private:
bool m_transmit; bool m_transmit;
@@ -43,3 +47,5 @@ private:
#endif #endif
#endif
+55
View File
@@ -0,0 +1,55 @@
/*
* Copyright (C) 2019 by Florian Wolters DF2ET
* Copyright (C) 2020 by Jonathan Naylor G4KLX
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "Config.h"
#if defined(MODE_POCSAG)
#include "Globals.h"
#include "CalPOCSAG.h"
CCalPOCSAG::CCalPOCSAG() :
m_state(POCSAGCAL_IDLE)
{
}
void CCalPOCSAG::process()
{
if (m_state == POCSAGCAL_IDLE)
return;
uint16_t space = io.getSpace();
if (space <= 165U)
return;
pocsagTX.writeByte(0xAAU);
}
uint8_t CCalPOCSAG::write(const uint8_t* data, uint16_t length)
{
if (length != 1U)
return 4U;
m_state = data[0U] == 1U ? POCSAGCAL_TX : POCSAGCAL_IDLE;
return 0U;
}
#endif
+47
View File
@@ -0,0 +1,47 @@
/*
* Copyright (C) 2019 by Florian Wolters DF2ET
* Copyright (C) 2020 by Jonathan Naylor G4KLX
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "Config.h"
#if defined(MODE_POCSAG)
#if !defined(CALPOCSAG_H)
#define CALPOCSAG_H
enum POCSAGCAL {
POCSAGCAL_IDLE,
POCSAGCAL_TX
};
class CCalPOCSAG {
public:
CCalPOCSAG();
void process();
uint8_t write(const uint8_t* data, uint16_t length);
private:
POCSAGCAL m_state;
};
#endif
#endif
+45 -13
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2015,2016,2017,2018 by Jonathan Naylor G4KLX * Copyright (C) 2015,2016,2017,2018,2020,2025 by Jonathan Naylor G4KLX
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
@@ -19,6 +19,31 @@
#if !defined(CONFIG_H) #if !defined(CONFIG_H)
#define CONFIG_H #define CONFIG_H
// Allow for the selection of which modes to compile into the firmware. This is particularly useful for processors
// which have limited code space and processing power.
// Enable D-Star support.
#define MODE_DSTAR
// Enable DMR support.
#define MODE_DMR
// Enable System Fusion support.
#define MODE_YSF
// Enable P25 phase 1 support.
#define MODE_P25
// Enable NXDN support, the boxcar filter sometimes improves the performance of NXDN receive on some systems.
#define MODE_NXDN
#define USE_NXDN_BOXCAR
// Enable POCSAG support.
#define MODE_POCSAG
// Enable FM support.
#define MODE_FM
// Allow for the use of high quality external clock oscillators // Allow for the use of high quality external clock oscillators
// The number is the frequency of the oscillator in Hertz. // The number is the frequency of the oscillator in Hertz.
// //
@@ -35,11 +60,14 @@
// For 19.2 MHz // For 19.2 MHz
// #define EXTERNAL_OSC 19200000 // #define EXTERNAL_OSC 19200000
// Allow the use of the COS line to lockout the modem // Select a baud rate for host communication. The faster speeds are needed for external FM to work.
// #define USE_COS_AS_LOCKOUT // #define SERIAL_SPEED 115200 // Suitable for most older boards (Arduino Due, etc). External FM will NOT work with this!
// #define SERIAL_SPEED 230400 // Only works on newer boards like fast M4, M7, Teensy 3.x. External FM might work with this
#define SERIAL_SPEED 460800 // Only works on newer boards like fast M4, M7, Teensy 3.x. External FM should work with this
//#define SERIAL_SPEED 500000 // Used with newer boards and Armbian on AllWinner SOCs (H2, H3) that do not support 460800
// Use pins to output the current mode via LEDs // Use pins to output the current mode via LEDs
// #define MODE_LEDS #define MODE_LEDS
// For the original Arduino Due pin layout // For the original Arduino Due pin layout
// #define ARDUINO_DUE_PAPA // #define ARDUINO_DUE_PAPA
@@ -47,15 +75,12 @@
// For the ZUM V1.0 and V1.0.1 boards pin layout // For the ZUM V1.0 and V1.0.1 boards pin layout
// #define ARDUINO_DUE_ZUM_V10 // #define ARDUINO_DUE_ZUM_V10
// For the SQ6POG board
// #define STM32F1_POG
// For the SP8NTH board // For the SP8NTH board
// #define ARDUINO_DUE_NTH // #define ARDUINO_DUE_NTH
// For ST Nucleo-64 STM32F446RE board // For ST Nucleo-64 STM32F446RE board
// #define STM32F4_NUCLEO_MORPHO_HEADER // #define STM32F4_NUCLEO_MORPHO_HEADER
#define STM32F4_NUCLEO_ARDUINO_HEADER // #define STM32F4_NUCLEO_ARDUINO_HEADER
// Use separate mode pins to switch external channel/filters/bandwidth for example // Use separate mode pins to switch external channel/filters/bandwidth for example
// #define MODE_PINS // #define MODE_PINS
@@ -67,10 +92,16 @@
#define SEND_RSSI_DATA #define SEND_RSSI_DATA
// Use the modem as a serial repeater for Nextion displays // Use the modem as a serial repeater for Nextion displays
// #define SERIAL_REPEATER #define SERIAL_REPEATER
// Set the baud rate of the modem serial repeater for Nextion displays
#define SERIAL_REPEATER_BAUD_RATE 9600
// Use the modem as an I2C repeater for OLED displays
// #define I2C_REPEATER
// To reduce CPU load, you can remove the DC blocker by commenting out the next line // To reduce CPU load, you can remove the DC blocker by commenting out the next line
// #define USE_DCBLOCKER #define USE_DCBLOCKER
// Constant Service LED once repeater is running // Constant Service LED once repeater is running
// Do not use if employing an external hardware watchdog // Do not use if employing an external hardware watchdog
@@ -80,9 +111,10 @@
// #define USE_ALTERNATE_NXDN_LEDS // #define USE_ALTERNATE_NXDN_LEDS
// Use the D-Star and DMR LEDs for POCSAG // Use the D-Star and DMR LEDs for POCSAG
// #define USE_ALTERNATE_POCSAG_LEDS #define USE_ALTERNATE_POCSAG_LEDS
// Select BOXCAR Filter into D-Star // Use the D-Star and YSF LEDs for FM
// #define DSTARBOXCAR #define USE_ALTERNATE_FM_LEDS
#endif #endif
+7 -1
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2009-2017 by Jonathan Naylor G4KLX * Copyright (C) 2009-2017,2020 by Jonathan Naylor G4KLX
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
@@ -17,6 +17,9 @@
*/ */
#include "Config.h" #include "Config.h"
#if defined(MODE_DMR)
#include "Globals.h" #include "Globals.h"
#include "DMRDMORX.h" #include "DMRDMORX.h"
#include "DMRSlotType.h" #include "DMRSlotType.h"
@@ -423,3 +426,6 @@ void CDMRDMORX::writeRSSIData(uint8_t* frame)
serial.writeDMRData(true, frame, DMR_FRAME_LENGTH_BYTES + 1U); serial.writeDMRData(true, frame, DMR_FRAME_LENGTH_BYTES + 1U);
#endif #endif
} }
#endif
+9 -3
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2015,2016,2017 by Jonathan Naylor G4KLX * Copyright (C) 2015,2016,2017,2020 by Jonathan Naylor G4KLX
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
@@ -16,13 +16,16 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/ */
#include "Config.h"
#if defined(MODE_DMR)
#if !defined(DMRDMORX_H) #if !defined(DMRDMORX_H)
#define DMRDMORX_H #define DMRDMORX_H
#include "Config.h"
#include "DMRDefines.h" #include "DMRDefines.h"
const uint16_t DMO_BUFFER_LENGTH_SAMPLES = 2880U; // 60ms at 48 kHz const uint16_t DMO_BUFFER_LENGTH_SAMPLES = 1440U; // 60ms at 24 kHz
enum DMORX_STATE { enum DMORX_STATE {
DMORXS_NONE, DMORXS_NONE,
@@ -67,3 +70,6 @@ private:
}; };
#endif #endif
#endif
+13 -13
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2009-2017 by Jonathan Naylor G4KLX * Copyright (C) 2009-2017,2020 by Jonathan Naylor G4KLX
* Copyright (C) 2016 by Colin Durbridge G4EML * Copyright (C) 2016 by Colin Durbridge G4EML
* Copyright (C) 2017 by Andy Uribe CA6JAU * Copyright (C) 2017 by Andy Uribe CA6JAU
* *
@@ -19,19 +19,16 @@
*/ */
#include "Config.h" #include "Config.h"
#if defined(MODE_DMR)
#include "Globals.h" #include "Globals.h"
#include "DMRSlotType.h" #include "DMRSlotType.h"
// Generated using rcosdesign(0.2, 8, 10, 'sqrt') in MATLAB // Generated using rcosdesign(0.2, 8, 5, 'sqrt') in MATLAB
static q15_t RRC_0_2_FILTER[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 850, 592, 219, -234, -720, -1179, static q15_t RRC_0_2_FILTER[] = {0, 0, 0, 0, 850, 219, -720, -1548, -1795, -1172, 237, 1927, 3120, 3073, 1447, -1431, -4544, -6442,
-1548, -1769, -1795, -1597, -1172, -544, 237, 1092, 1927, 2637, -5735, -1633, 5651, 14822, 23810, 30367, 32767, 30367, 23810, 14822, 5651, -1633, -5735, -6442,
3120, 3286, 3073, 2454, 1447, 116, -1431, -3043, -4544, -5739, -4544, -1431, 1447, 3073, 3120, 1927, 237, -1172, -1795, -1548, -720, 219, 850}; // numTaps = 45, L = 5
-6442, -6483, -5735, -4121, -1633, 1669, 5651, 10118, 14822,
19484, 23810, 27520, 30367, 32156, 32767, 32156, 30367, 27520,
23810, 19484, 14822, 10118, 5651, 1669, -1633, -4121, -5735,
-6483, -6442, -5739, -4544, -3043, -1431, 116, 1447, 2454,
3073, 3286, 3120, 2637, 1927, 1092, 237, -544, -1172, -1597,
-1795, -1769, -1548, -1179, -720, -234, 219, 592, 850}; // numTaps = 90, L = 10
const uint16_t RRC_0_2_FILTER_PHASE_LEN = 9U; // phaseLength = numTaps/L const uint16_t RRC_0_2_FILTER_PHASE_LEN = 9U; // phaseLength = numTaps/L
const q15_t DMR_LEVELA = 1362; const q15_t DMR_LEVELA = 1362;
@@ -80,7 +77,7 @@ void CDMRDMOTX::process()
m_poLen = m_txDelay; m_poLen = m_txDelay;
} else { } else {
for (unsigned int i = 0U; i < DMR_FRAME_LENGTH_BYTES; i++) for (unsigned int i = 0U; i < DMR_FRAME_LENGTH_BYTES; i++)
m_poBuffer[i] = m_fifo.get(); m_fifo.get(m_poBuffer[i]);
for (unsigned int i = 0U; i < 39U; i++) for (unsigned int i = 0U; i < 39U; i++)
m_poBuffer[i + DMR_FRAME_LENGTH_BYTES] = PR_FILL[i]; m_poBuffer[i + DMR_FRAME_LENGTH_BYTES] = PR_FILL[i];
@@ -110,7 +107,7 @@ void CDMRDMOTX::process()
} }
} }
uint8_t CDMRDMOTX::writeData(const uint8_t* data, uint8_t length) uint8_t CDMRDMOTX::writeData(const uint8_t* data, uint16_t length)
{ {
if (length != (DMR_FRAME_LENGTH_BYTES + 1U)) if (length != (DMR_FRAME_LENGTH_BYTES + 1U))
return 4U; return 4U;
@@ -166,3 +163,6 @@ void CDMRDMOTX::setTXDelay(uint8_t delay)
if (m_txDelay > 1200U) if (m_txDelay > 1200U)
m_txDelay = 1200U; m_txDelay = 1200U;
} }
#endif
+10 -5
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2015,2016,2017 by Jonathan Naylor G4KLX * Copyright (C) 2015,2016,2017,2020 by Jonathan Naylor G4KLX
* Copyright (C) 2016 by Colin Durbridge G4EML * Copyright (C) 2016 by Colin Durbridge G4EML
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
@@ -17,19 +17,22 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/ */
#include "Config.h"
#if defined(MODE_DMR)
#if !defined(DMRDMOTX_H) #if !defined(DMRDMOTX_H)
#define DMRDMOTX_H #define DMRDMOTX_H
#include "Config.h"
#include "DMRDefines.h" #include "DMRDefines.h"
#include "SerialRB.h" #include "RingBuffer.h"
class CDMRDMOTX { class CDMRDMOTX {
public: public:
CDMRDMOTX(); CDMRDMOTX();
uint8_t writeData(const uint8_t* data, uint8_t length); uint8_t writeData(const uint8_t* data, uint16_t length);
void process(); void process();
@@ -38,7 +41,7 @@ public:
uint8_t getSpace() const; uint8_t getSpace() const;
private: private:
CSerialRB m_fifo; CRingBuffer<uint8_t> m_fifo;
arm_fir_interpolate_instance_q15 m_modFilter; arm_fir_interpolate_instance_q15 m_modFilter;
q15_t m_modState[16U]; // blockSize + phaseLength - 1, 4 + 9 - 1 plus some spare q15_t m_modState[16U]; // blockSize + phaseLength - 1, 4 + 9 - 1 plus some spare
uint8_t m_poBuffer[1200U]; uint8_t m_poBuffer[1200U];
@@ -51,3 +54,5 @@ private:
#endif #endif
#endif
+2 -2
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2009-2017 by Jonathan Naylor G4KLX * Copyright (C) 2009-2016 by Jonathan Naylor G4KLX
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
@@ -19,7 +19,7 @@
#if !defined(DMRDEFINES_H) #if !defined(DMRDEFINES_H)
#define DMRDEFINES_H #define DMRDEFINES_H
const unsigned int DMR_RADIO_SYMBOL_LENGTH = 10U; // At 48 kHz sample rate const unsigned int DMR_RADIO_SYMBOL_LENGTH = 5U; // At 24 kHz sample rate
const unsigned int DMR_FRAME_LENGTH_BYTES = 33U; const unsigned int DMR_FRAME_LENGTH_BYTES = 33U;
const unsigned int DMR_FRAME_LENGTH_BITS = DMR_FRAME_LENGTH_BYTES * 8U; const unsigned int DMR_FRAME_LENGTH_BITS = DMR_FRAME_LENGTH_BYTES * 8U;
+9 -3
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2009-2017 by Jonathan Naylor G4KLX * Copyright (C) 2009-2017,2020 by Jonathan Naylor G4KLX
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
@@ -17,6 +17,9 @@
*/ */
#include "Config.h" #include "Config.h"
#if defined(MODE_DMR)
#include "Globals.h" #include "Globals.h"
#include "DMRIdleRX.h" #include "DMRIdleRX.h"
#include "DMRSlotType.h" #include "DMRSlotType.h"
@@ -24,8 +27,8 @@
const q15_t SCALING_FACTOR = 19505; // Q15(0.60) const q15_t SCALING_FACTOR = 19505; // Q15(0.60)
const uint8_t MAX_SYNC_SYMBOLS_ERRS = 4U; const uint8_t MAX_SYNC_SYMBOLS_ERRS = 2U;
const uint8_t MAX_SYNC_BYTES_ERRS = 6U; const uint8_t MAX_SYNC_BYTES_ERRS = 3U;
const uint8_t BIT_MASK_TABLE[] = {0x80U, 0x40U, 0x20U, 0x10U, 0x08U, 0x04U, 0x02U, 0x01U}; const uint8_t BIT_MASK_TABLE[] = {0x80U, 0x40U, 0x20U, 0x10U, 0x08U, 0x04U, 0x02U, 0x01U};
@@ -209,3 +212,6 @@ void CDMRIdleRX::setColorCode(uint8_t colorCode)
{ {
m_colorCode = colorCode; m_colorCode = colorCode;
} }
#endif
+7 -2
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2015 by Jonathan Naylor G4KLX * Copyright (C) 2015,2020 by Jonathan Naylor G4KLX
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
@@ -16,10 +16,13 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/ */
#include "Config.h"
#if defined(MODE_DMR)
#if !defined(DMRIDLERX_H) #if !defined(DMRIDLERX_H)
#define DMRIDLERX_H #define DMRIDLERX_H
#include "Config.h"
#include "DMRDefines.h" #include "DMRDefines.h"
class CDMRIdleRX { class CDMRIdleRX {
@@ -49,3 +52,5 @@ private:
#endif #endif
#endif
+6 -1
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2015,2016 by Jonathan Naylor G4KLX * Copyright (C) 2015,2016,2020 by Jonathan Naylor G4KLX
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
@@ -17,6 +17,9 @@
*/ */
#include "Config.h" #include "Config.h"
#if defined(MODE_DMR)
#include "Globals.h" #include "Globals.h"
#include "DMRRX.h" #include "DMRRX.h"
@@ -68,3 +71,5 @@ void CDMRRX::reset()
m_slot2RX.reset(); m_slot2RX.reset();
} }
#endif
+7 -2
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2015,2016 by Jonathan Naylor G4KLX * Copyright (C) 2015,2016,2020 by Jonathan Naylor G4KLX
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
@@ -16,10 +16,13 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/ */
#include "Config.h"
#if defined(MODE_DMR)
#if !defined(DMRRX_H) #if !defined(DMRRX_H)
#define DMRRX_H #define DMRRX_H
#include "Config.h"
#include "DMRSlotRX.h" #include "DMRSlotRX.h"
class CDMRRX { class CDMRRX {
@@ -40,3 +43,5 @@ private:
#endif #endif
#endif
+13 -7
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2009-2017 by Jonathan Naylor G4KLX * Copyright (C) 2009-2017,2020 by Jonathan Naylor G4KLX
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
@@ -17,20 +17,23 @@
*/ */
#include "Config.h" #include "Config.h"
#if defined(MODE_DMR)
#include "Globals.h" #include "Globals.h"
#include "DMRSlotRX.h" #include "DMRSlotRX.h"
#include "DMRSlotType.h" #include "DMRSlotType.h"
#include "Utils.h" #include "Utils.h"
const uint16_t SCAN_START = 790U; const uint16_t SCAN_START = 400U;
const uint16_t SCAN_END = 920U; const uint16_t SCAN_END = 490U;
const q15_t SCALING_FACTOR = 19505; // Q15(0.60) const q15_t SCALING_FACTOR = 19505; // Q15(0.60)
const uint8_t MAX_SYNC_SYMBOLS_ERRS = 4U; const uint8_t MAX_SYNC_SYMBOLS_ERRS = 2U;
const uint8_t MAX_SYNC_BYTES_ERRS = 6U; const uint8_t MAX_SYNC_BYTES_ERRS = 3U;
const uint8_t MAX_SYNC_LOST_FRAMES = 26U; const uint8_t MAX_SYNC_LOST_FRAMES = 13U;
const uint8_t BIT_MASK_TABLE[] = {0x80U, 0x40U, 0x20U, 0x10U, 0x08U, 0x04U, 0x02U, 0x01U}; const uint8_t BIT_MASK_TABLE[] = {0x80U, 0x40U, 0x20U, 0x10U, 0x08U, 0x04U, 0x02U, 0x01U};
@@ -97,7 +100,7 @@ bool CDMRSlotRX::processSample(q15_t sample, uint16_t rssi)
return m_state != DMRRXS_NONE; return m_state != DMRRXS_NONE;
// Ensure that the buffer doesn't overflow // Ensure that the buffer doesn't overflow
if (m_dataPtr > m_endPtr || m_dataPtr >= 1900U) if (m_dataPtr > m_endPtr || m_dataPtr >= 900U)
return m_state != DMRRXS_NONE; return m_state != DMRRXS_NONE;
m_buffer[m_dataPtr] = sample; m_buffer[m_dataPtr] = sample;
@@ -400,3 +403,6 @@ void CDMRSlotRX::writeRSSIData(uint8_t* frame)
serial.writeDMRData(m_slot, frame, DMR_FRAME_LENGTH_BYTES + 1U); serial.writeDMRData(m_slot, frame, DMR_FRAME_LENGTH_BYTES + 1U);
#endif #endif
} }
#endif
+10 -4
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2015,2016,2017 by Jonathan Naylor G4KLX * Copyright (C) 2015,2016,2017,2020 by Jonathan Naylor G4KLX
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
@@ -16,10 +16,13 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/ */
#include "Config.h"
#if defined(MODE_DMR)
#if !defined(DMRSLOTRX_H) #if !defined(DMRSLOTRX_H)
#define DMRSLOTRX_H #define DMRSLOTRX_H
#include "Config.h"
#include "DMRDefines.h" #include "DMRDefines.h"
enum DMRRX_STATE { enum DMRRX_STATE {
@@ -44,7 +47,7 @@ public:
private: private:
bool m_slot; bool m_slot;
uint32_t m_bitBuffer[DMR_RADIO_SYMBOL_LENGTH]; uint32_t m_bitBuffer[DMR_RADIO_SYMBOL_LENGTH];
q15_t m_buffer[1900U]; q15_t m_buffer[900U];
uint16_t m_bitPtr; uint16_t m_bitPtr;
uint16_t m_dataPtr; uint16_t m_dataPtr;
uint16_t m_syncPtr; uint16_t m_syncPtr;
@@ -62,7 +65,7 @@ private:
DMRRX_STATE m_state; DMRRX_STATE m_state;
uint8_t m_n; uint8_t m_n;
uint8_t m_type; uint8_t m_type;
uint16_t m_rssi[1900U]; uint16_t m_rssi[900U];
void correlateSync(bool first); void correlateSync(bool first);
void samplesToBits(uint16_t start, uint8_t count, uint8_t* buffer, uint16_t offset, q15_t centre, q15_t threshold); void samplesToBits(uint16_t start, uint8_t count, uint8_t* buffer, uint16_t offset, q15_t centre, q15_t threshold);
@@ -70,3 +73,6 @@ private:
}; };
#endif #endif
#endif
+6 -1
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2015 by Jonathan Naylor G4KLX * Copyright (C) 2015,2020 by Jonathan Naylor G4KLX
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
@@ -17,6 +17,9 @@
*/ */
#include "Config.h" #include "Config.h"
#if defined(MODE_DMR)
#include "Globals.h" #include "Globals.h"
#include "DMRSlotType.h" #include "DMRSlotType.h"
@@ -285,3 +288,5 @@ void CDMRSlotType::encode(uint8_t colorCode, uint8_t dataType, uint8_t* frame) c
frame[20U] = (frame[20U] & 0x03U) | ((slotType[1U] << 6) & 0xC0U) | ((slotType[2U] >> 2) & 0x3CU); frame[20U] = (frame[20U] & 0x03U) | ((slotType[1U] << 6) & 0xC0U) | ((slotType[2U] >> 2) & 0x3CU);
} }
#endif
+7 -1
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2015 by Jonathan Naylor G4KLX * Copyright (C) 2015,2020 by Jonathan Naylor G4KLX
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
@@ -16,6 +16,10 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/ */
#include "Config.h"
#if defined(MODE_DMR)
#if !defined(DMRSLOTTYPE_H) #if !defined(DMRSLOTTYPE_H)
#define DMRSLOTTYPE_H #define DMRSLOTTYPE_H
@@ -35,3 +39,5 @@ private:
#endif #endif
#endif
+79 -26
View File
@@ -1,7 +1,8 @@
/* /*
* Copyright (C) 2009-2017 by Jonathan Naylor G4KLX * Copyright (C) 2009-2017,2020 by Jonathan Naylor G4KLX
* Copyright (C) 2016 by Colin Durbridge G4EML * Copyright (C) 2016 by Colin Durbridge G4EML
* Copyright (C) 2017 by Andy Uribe CA6JAU * Copyright (C) 2017 by Andy Uribe CA6JAU
* Copyright (C) 2022,2023,2026 by Adrian Musceac YO8RZZ
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
@@ -19,19 +20,16 @@
*/ */
#include "Config.h" #include "Config.h"
#if defined(MODE_DMR)
#include "Globals.h" #include "Globals.h"
#include "DMRSlotType.h" #include "DMRSlotType.h"
// Generated using rcosdesign(0.2, 8, 10, 'sqrt') in MATLAB // Generated using rcosdesign(0.2, 8, 5, 'sqrt') in MATLAB
static q15_t RRC_0_2_FILTER[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 850, 592, 219, -234, -720, -1179, static q15_t RRC_0_2_FILTER[] = {0, 0, 0, 0, 850, 219, -720, -1548, -1795, -1172, 237, 1927, 3120, 3073, 1447, -1431, -4544, -6442,
-1548, -1769, -1795, -1597, -1172, -544, 237, 1092, 1927, 2637, -5735, -1633, 5651, 14822, 23810, 30367, 32767, 30367, 23810, 14822, 5651, -1633, -5735, -6442,
3120, 3286, 3073, 2454, 1447, 116, -1431, -3043, -4544, -5739, -4544, -1431, 1447, 3073, 3120, 1927, 237, -1172, -1795, -1548, -720, 219, 850}; // numTaps = 45, L = 5
-6442, -6483, -5735, -4121, -1633, 1669, 5651, 10118, 14822,
19484, 23810, 27520, 30367, 32156, 32767, 32156, 30367, 27520,
23810, 19484, 14822, 10118, 5651, 1669, -1633, -4121, -5735,
-6483, -6442, -5739, -4544, -3043, -1431, 116, 1447, 2454,
3073, 3286, 3120, 2637, 1927, 1092, 237, -544, -1172, -1597,
-1795, -1769, -1548, -1179, -720, -234, 219, 592, 850}; // numTaps = 90, L = 10
const uint16_t RRC_0_2_FILTER_PHASE_LEN = 9U; // phaseLength = numTaps/L const uint16_t RRC_0_2_FILTER_PHASE_LEN = 9U; // phaseLength = numTaps/L
const q15_t DMR_LEVELA = 1362; const q15_t DMR_LEVELA = 1362;
@@ -45,6 +43,12 @@ const uint8_t IDLE_DATA[] =
0x36U, 0x00U, 0x0DU, 0xFFU, 0x57U, 0xD7U, 0x5DU, 0xF5U, 0xD0U, 0x03U, 0xF6U, 0x36U, 0x00U, 0x0DU, 0xFFU, 0x57U, 0xD7U, 0x5DU, 0xF5U, 0xD0U, 0x03U, 0xF6U,
0xE4U, 0x65U, 0x17U, 0x1BU, 0x48U, 0xCAU, 0x6DU, 0x4FU, 0xC6U, 0x10U, 0xB4U}; 0xE4U, 0x65U, 0x17U, 0x1BU, 0x48U, 0xCAU, 0x6DU, 0x4FU, 0xC6U, 0x10U, 0xB4U};
// DT Terminator with LC, empty
const uint8_t TERMINATOR_DATA[] =
{0x00U, 0xCCU, 0x01U, 0x80U, 0x01U, 0x94U, 0x01U, 0x48U, 0x08U, 0xB0U, 0x08U,
0x80U, 0x04U, 0xADU, 0xFFU, 0x57U, 0xD7U, 0x5DU, 0xF5U, 0xD9U, 0x65U, 0x90U,
0x01U, 0x78U, 0x00U, 0xD0U, 0x08U, 0x40U, 0x14U, 0x00U, 0x0DU, 0x80U, 0x15U};
const uint8_t CACH_INTERLEAVE[] = const uint8_t CACH_INTERLEAVE[] =
{ 1U, 2U, 3U, 5U, 6U, 7U, 9U, 10U, 11U, 13U, 15U, 16U, 17U, 19U, 20U, 21U, 23U, { 1U, 2U, 3U, 5U, 6U, 7U, 9U, 10U, 11U, 13U, 15U, 16U, 17U, 19U, 20U, 21U, 23U,
25U, 26U, 27U, 29U, 30U, 31U, 33U, 34U, 35U, 37U, 39U, 40U, 41U, 43U, 44U, 45U, 47U, 25U, 26U, 27U, 29U, 30U, 31U, 33U, 34U, 35U, 37U, 39U, 40U, 41U, 43U, 44U, 45U, 47U,
@@ -68,6 +72,7 @@ m_modFilter(),
m_modState(), m_modState(),
m_state(DMRTXSTATE_IDLE), m_state(DMRTXSTATE_IDLE),
m_idle(), m_idle(),
m_aloha(),
m_cachPtr(0U), m_cachPtr(0U),
m_shortLC(), m_shortLC(),
m_newShortLC(), m_newShortLC(),
@@ -77,7 +82,10 @@ m_poLen(0U),
m_poPtr(0U), m_poPtr(0U),
m_frameCount(0U), m_frameCount(0U),
m_abortCount(), m_abortCount(),
m_abort() m_abort(),
m_controlChannel(false),
m_trunking(false),
m_colorCode(0U)
{ {
::memset(m_modState, 0x00U, 16U * sizeof(q15_t)); ::memset(m_modState, 0x00U, 16U * sizeof(q15_t));
@@ -150,7 +158,7 @@ void CDMRTX::process()
} }
} }
uint8_t CDMRTX::writeData1(const uint8_t* data, uint8_t length) uint8_t CDMRTX::writeData1(const uint8_t* data, uint16_t length)
{ {
if (length != (DMR_FRAME_LENGTH_BYTES + 1U)) if (length != (DMR_FRAME_LENGTH_BYTES + 1U))
return 4U; return 4U;
@@ -174,7 +182,7 @@ uint8_t CDMRTX::writeData1(const uint8_t* data, uint8_t length)
return 0U; return 0U;
} }
uint8_t CDMRTX::writeData2(const uint8_t* data, uint8_t length) uint8_t CDMRTX::writeData2(const uint8_t* data, uint16_t length)
{ {
if (length != (DMR_FRAME_LENGTH_BYTES + 1U)) if (length != (DMR_FRAME_LENGTH_BYTES + 1U))
return 4U; return 4U;
@@ -198,7 +206,7 @@ uint8_t CDMRTX::writeData2(const uint8_t* data, uint8_t length)
return 0U; return 0U;
} }
uint8_t CDMRTX::writeShortLC(const uint8_t* data, uint8_t length) uint8_t CDMRTX::writeShortLC(const uint8_t* data, uint16_t length)
{ {
if (length != 9U) if (length != 9U)
return 4U; return 4U;
@@ -214,7 +222,24 @@ uint8_t CDMRTX::writeShortLC(const uint8_t* data, uint8_t length)
return 0U; return 0U;
} }
uint8_t CDMRTX::writeAbort(const uint8_t* data, uint8_t length) uint8_t CDMRTX::writeAloha(const uint8_t* data, uint16_t length)
{
if (length != DMR_FRAME_LENGTH_BYTES)
return 4U;
::memcpy(m_aloha, data, length);
// Stamp the slot type with the current colour code so that the result
// doesn't depend on the ordering of the ALOHA and SET_CONFIG commands.
CDMRSlotType slotType;
slotType.encode(m_colorCode, DT_CSBK, m_aloha);
m_controlChannel = true;
return 0U;
}
uint8_t CDMRTX::writeAbort(const uint8_t* data, uint16_t length)
{ {
if (length != 1U) if (length != 1U)
return 4U; return 4U;
@@ -297,16 +322,20 @@ uint8_t CDMRTX::getSpace2() const
void CDMRTX::createData(uint8_t slotIndex) void CDMRTX::createData(uint8_t slotIndex)
{ {
if (m_fifo[slotIndex].getData() >= DMR_FRAME_LENGTH_BYTES && m_frameCount >= STARTUP_COUNT && m_abortCount[slotIndex] >= ABORT_COUNT) { if ((m_fifo[slotIndex].getData() >= DMR_FRAME_LENGTH_BYTES) && (m_frameCount >= STARTUP_COUNT) && (m_abortCount[slotIndex] >= ABORT_COUNT)) {
for (unsigned int i = 0U; i < DMR_FRAME_LENGTH_BYTES; i++) { for (unsigned int i = 0U; i < DMR_FRAME_LENGTH_BYTES; i++) {
m_poBuffer[i] = m_fifo[slotIndex].get(); m_fifo[slotIndex].get(m_poBuffer[i]);
m_markBuffer[i] = MARK_NONE; m_markBuffer[i] = MARK_NONE;
} }
} else { } else {
m_abort[slotIndex] = false; m_abort[slotIndex] = false;
// Transmit an idle message // Transmit an idle message
for (unsigned int i = 0U; i < DMR_FRAME_LENGTH_BYTES; i++) { for (unsigned int i = 0U; i < DMR_FRAME_LENGTH_BYTES; i++) {
m_poBuffer[i] = m_idle[i]; if ((slotIndex == 0U) && m_controlChannel && m_trunking)
m_poBuffer[i] = m_aloha[i];
else
m_poBuffer[i] = m_idle[i];
m_markBuffer[i] = MARK_NONE; m_markBuffer[i] = MARK_NONE;
} }
} }
@@ -357,10 +386,14 @@ void CDMRTX::createCACH(uint8_t txSlotIndex, uint8_t rxSlotIndex)
m_cachPtr = 0U; m_cachPtr = 0U;
if (m_cachPtr == 0U) { if (m_cachPtr == 0U) {
if (m_fifo[0U].getData() == 0U && m_fifo[1U].getData() == 0U) if ((m_fifo[0U].getData() == 0U) && (m_fifo[1U].getData() == 0U)) {
::memcpy(m_shortLC, EMPTY_SHORT_LC, 12U); if (m_trunking)
else ::memcpy(m_shortLC, m_newShortLC, 12U);
else
::memcpy(m_shortLC, EMPTY_SHORT_LC, 12U);
} else {
::memcpy(m_shortLC, m_newShortLC, 12U); ::memcpy(m_shortLC, m_newShortLC, 12U);
}
} }
::memcpy(m_poBuffer, m_shortLC + m_cachPtr, 3U); ::memcpy(m_poBuffer, m_shortLC + m_cachPtr, 3U);
@@ -370,8 +403,8 @@ void CDMRTX::createCACH(uint8_t txSlotIndex, uint8_t rxSlotIndex)
bool at = false; bool at = false;
if (m_frameCount >= STARTUP_COUNT) if (m_frameCount >= STARTUP_COUNT)
at = m_fifo[rxSlotIndex].getData() > 0U; at = (m_fifo[rxSlotIndex].getData() > 0U);
bool tc = txSlotIndex == 1U; bool tc = (txSlotIndex == 1U);
bool ls0 = true; // For 1 and 2 bool ls0 = true; // For 1 and 2
bool ls1 = true; bool ls1 = true;
@@ -400,10 +433,20 @@ void CDMRTX::createCACH(uint8_t txSlotIndex, uint8_t rxSlotIndex)
void CDMRTX::setColorCode(uint8_t colorCode) void CDMRTX::setColorCode(uint8_t colorCode)
{ {
::memcpy(m_idle, IDLE_DATA, DMR_FRAME_LENGTH_BYTES); m_colorCode = colorCode;
if (m_trunking)
::memcpy(m_idle, TERMINATOR_DATA, DMR_FRAME_LENGTH_BYTES);
else
::memcpy(m_idle, IDLE_DATA, DMR_FRAME_LENGTH_BYTES);
CDMRSlotType slotType; CDMRSlotType slotType;
slotType.encode(colorCode, DT_IDLE, m_idle); if (m_trunking) {
slotType.encode(colorCode, DT_TERMINATOR_WITH_LC, m_idle);
slotType.encode(colorCode, DT_CSBK, m_aloha);
} else {
slotType.encode(colorCode, DT_IDLE, m_idle);
}
} }
void CDMRTX::resetFifo1() void CDMRTX::resetFifo1()
@@ -420,3 +463,13 @@ uint32_t CDMRTX::getFrameCount()
{ {
return m_frameCount; return m_frameCount;
} }
void CDMRTX::setTrunking(bool trunking)
{
m_trunking = trunking;
if (!trunking)
m_controlChannel = false;
}
#endif
+19 -8
View File
@@ -1,6 +1,7 @@
/* /*
* Copyright (C) 2015,2016,2017 by Jonathan Naylor G4KLX * Copyright (C) 2015,2016,2017,2020 by Jonathan Naylor G4KLX
* Copyright (C) 2016 by Colin Durbridge G4EML * Copyright (C) 2016 by Colin Durbridge G4EML
* Copyright (C) 2026 by Adrian Musceac YO8RZZ
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
@@ -17,13 +18,16 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/ */
#include "Config.h"
#if defined(MODE_DMR)
#if !defined(DMRTX_H) #if !defined(DMRTX_H)
#define DMRTX_H #define DMRTX_H
#include "Config.h"
#include "DMRDefines.h" #include "DMRDefines.h"
#include "SerialRB.h" #include "RingBuffer.h"
enum DMRTXSTATE { enum DMRTXSTATE {
DMRTXSTATE_IDLE, DMRTXSTATE_IDLE,
@@ -38,14 +42,16 @@ class CDMRTX {
public: public:
CDMRTX(); CDMRTX();
uint8_t writeData1(const uint8_t* data, uint8_t length); uint8_t writeData1(const uint8_t* data, uint16_t length);
uint8_t writeData2(const uint8_t* data, uint8_t length); uint8_t writeData2(const uint8_t* data, uint16_t length);
uint8_t writeShortLC(const uint8_t* data, uint8_t length); uint8_t writeShortLC(const uint8_t* data, uint16_t length);
uint8_t writeAbort(const uint8_t* data, uint8_t length); uint8_t writeAloha(const uint8_t* data, uint16_t length);
uint8_t writeAbort(const uint8_t* data, uint16_t length);
void setStart(bool start); void setStart(bool start);
void setCal(bool start); void setCal(bool start);
void setTrunking(bool trunking);
void process(); void process();
@@ -59,11 +65,12 @@ public:
void setColorCode(uint8_t colorCode); void setColorCode(uint8_t colorCode);
private: private:
CSerialRB m_fifo[2U]; CRingBuffer<uint8_t> m_fifo[2U];
arm_fir_interpolate_instance_q15 m_modFilter; arm_fir_interpolate_instance_q15 m_modFilter;
q15_t m_modState[16U]; // blockSize + phaseLength - 1, 4 + 9 - 1 plus some spare q15_t m_modState[16U]; // blockSize + phaseLength - 1, 4 + 9 - 1 plus some spare
DMRTXSTATE m_state; DMRTXSTATE m_state;
uint8_t m_idle[DMR_FRAME_LENGTH_BYTES]; uint8_t m_idle[DMR_FRAME_LENGTH_BYTES];
uint8_t m_aloha[DMR_FRAME_LENGTH_BYTES];
uint8_t m_cachPtr; uint8_t m_cachPtr;
uint8_t m_shortLC[12U]; uint8_t m_shortLC[12U];
uint8_t m_newShortLC[12U]; uint8_t m_newShortLC[12U];
@@ -74,6 +81,9 @@ private:
uint32_t m_frameCount; uint32_t m_frameCount;
uint32_t m_abortCount[2U]; uint32_t m_abortCount[2U];
bool m_abort[2U]; bool m_abort[2U];
bool m_controlChannel;
bool m_trunking;
uint8_t m_colorCode;
void createData(uint8_t slotIndex); void createData(uint8_t slotIndex);
void createCACH(uint8_t txSlotIndex, uint8_t rxSlotIndex); void createCACH(uint8_t txSlotIndex, uint8_t rxSlotIndex);
@@ -83,3 +93,4 @@ private:
#endif #endif
#endif
+2 -2
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2009-2015,2017 by Jonathan Naylor G4KLX * Copyright (C) 2009-2015,2017,2020 by Jonathan Naylor G4KLX
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
@@ -19,7 +19,7 @@
#if !defined(DSTARDEFINES_H) #if !defined(DSTARDEFINES_H)
#define DSTARDEFINES_H #define DSTARDEFINES_H
const unsigned int DSTAR_RADIO_SYMBOL_LENGTH = 10U; // At 48 kHz sample rate const unsigned int DSTAR_RADIO_SYMBOL_LENGTH = 5U; // At 24 kHz sample rate
const unsigned int DSTAR_HEADER_LENGTH_BYTES = 41U; const unsigned int DSTAR_HEADER_LENGTH_BYTES = 41U;
+22 -17
View File
@@ -1,6 +1,5 @@
/* /*
* Copyright (C) 2009-2017 by Jonathan Naylor G4KLX * Copyright (C) 2009-2017,2020 by Jonathan Naylor G4KLX
* Copyright (C) 2017 by Andy Uribe CA6JAU * Copyright (C) 2017 by Andy Uribe CA6JAU
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
@@ -19,6 +18,9 @@
*/ */
#include "Config.h" #include "Config.h"
#if defined(MODE_DSTAR)
#include "Globals.h" #include "Globals.h"
#include "DStarRX.h" #include "DStarRX.h"
#include "Utils.h" #include "Utils.h"
@@ -26,18 +28,18 @@
const unsigned int MAX_FRAMES = 150U; const unsigned int MAX_FRAMES = 150U;
// D-Star bit order version of 0x55 0x55 0x6E 0x0A // D-Star bit order version of 0x55 0x55 0x6E 0x0A
const uint32_t FRAME_SYNC_DATA = 0x00557650U; const uint64_t FRAME_SYNC_DATA = 0x0000000000557650U;
const uint32_t FRAME_SYNC_MASK = 0x00FFFFFFU; const uint64_t FRAME_SYNC_MASK = 0x0000000000FFFFFFU;
const uint8_t FRAME_SYNC_ERRS = 1U; const uint8_t FRAME_SYNC_ERRS = 2U;
// D-Star bit order version of 0x55 0x2D 0x16 // D-Star bit order version of 0x55 0x2D 0x16
const uint32_t DATA_SYNC_DATA = 0x00AAB468U; const uint64_t DATA_SYNC_DATA = 0x0000000000AAB468U;
const uint32_t DATA_SYNC_MASK = 0x00FFFFFFU; const uint64_t DATA_SYNC_MASK = 0x0000000000FFFFFFU;
const uint8_t DATA_SYNC_ERRS = 2U; const uint8_t DATA_SYNC_ERRS = 2U;
// D-Star bit order version of 0x55 0x55 0xC8 0x7A // D-Star bit order version of 0x55 0x55 0xC8 0x7A
const uint32_t END_SYNC_DATA = 0xAAAA135EU; const uint64_t END_SYNC_DATA = 0x0000AAAAAAAA135EU;
const uint32_t END_SYNC_MASK = 0xFFFFFFFFU; const uint64_t END_SYNC_MASK = 0x0000FFFFFFFFFFFFU;
const uint8_t END_SYNC_ERRS = 1U; const uint8_t END_SYNC_ERRS = 1U;
const uint8_t BIT_MASK_TABLE0[] = {0x7FU, 0xBFU, 0xDFU, 0xEFU, 0xF7U, 0xFBU, 0xFDU, 0xFEU}; const uint8_t BIT_MASK_TABLE0[] = {0x7FU, 0xBFU, 0xDFU, 0xEFU, 0xF7U, 0xFBU, 0xFDU, 0xFEU};
@@ -322,7 +324,7 @@ void CDStarRX::processNone(q15_t sample)
bool ret = correlateFrameSync(); bool ret = correlateFrameSync();
if (ret) { if (ret) {
m_countdown = 5U; m_countdown = 5U;
m_headerBuffer[m_headerPtr] = sample; m_headerBuffer[m_headerPtr] = sample;
m_headerPtr++; m_headerPtr++;
@@ -382,10 +384,10 @@ void CDStarRX::processHeader(q15_t sample)
m_frameCount = 0U; m_frameCount = 0U;
m_dataPtr = 0U; m_dataPtr = 0U;
m_startPtr = 952U; m_startPtr = 476U;
m_syncPtr = 942U; m_syncPtr = 471U;
m_maxSyncPtr = 944U; m_maxSyncPtr = 472U;
m_minSyncPtr = 940U; m_minSyncPtr = 470U;
DEBUG5("DStarRX: calc start/sync/max/min", m_startPtr, m_syncPtr, m_maxSyncPtr, m_minSyncPtr); DEBUG5("DStarRX: calc start/sync/max/min", m_startPtr, m_syncPtr, m_maxSyncPtr, m_minSyncPtr);
@@ -396,7 +398,7 @@ void CDStarRX::processHeader(q15_t sample)
void CDStarRX::processData() void CDStarRX::processData()
{ {
// Fuzzy matching of the end frame sequences // Fuzzy matching of the end frame sequences
if (countBits32((m_bitBuffer[m_bitPtr] & DSTAR_END_SYNC_MASK) ^ DSTAR_END_SYNC_DATA) <= END_SYNC_ERRS) { if (countBits64((m_bitBuffer[m_bitPtr] & DSTAR_END_SYNC_MASK) ^ DSTAR_END_SYNC_DATA) <= END_SYNC_ERRS) {
DEBUG1("DStarRX: Found end sync in Data"); DEBUG1("DStarRX: Found end sync in Data");
io.setDecode(false); io.setDecode(false);
@@ -505,7 +507,7 @@ void CDStarRX::writeRSSIData(unsigned char* data)
bool CDStarRX::correlateFrameSync() bool CDStarRX::correlateFrameSync()
{ {
if (countBits32((m_bitBuffer[m_bitPtr] & DSTAR_FRAME_SYNC_MASK) ^ DSTAR_FRAME_SYNC_DATA) <= FRAME_SYNC_ERRS) { if (countBits64((m_bitBuffer[m_bitPtr] & DSTAR_FRAME_SYNC_MASK) ^ DSTAR_FRAME_SYNC_DATA) <= FRAME_SYNC_ERRS) {
uint16_t ptr = m_dataPtr + DSTAR_DATA_LENGTH_SAMPLES - DSTAR_FRAME_SYNC_LENGTH_SAMPLES + DSTAR_RADIO_SYMBOL_LENGTH; uint16_t ptr = m_dataPtr + DSTAR_DATA_LENGTH_SAMPLES - DSTAR_FRAME_SYNC_LENGTH_SAMPLES + DSTAR_RADIO_SYMBOL_LENGTH;
if (ptr >= DSTAR_DATA_LENGTH_SAMPLES) if (ptr >= DSTAR_DATA_LENGTH_SAMPLES)
ptr -= DSTAR_DATA_LENGTH_SAMPLES; ptr -= DSTAR_DATA_LENGTH_SAMPLES;
@@ -541,7 +543,7 @@ bool CDStarRX::correlateDataSync()
if (m_rxState == DSRXS_DATA) if (m_rxState == DSRXS_DATA)
maxErrs = DATA_SYNC_ERRS; maxErrs = DATA_SYNC_ERRS;
if (countBits32((m_bitBuffer[m_bitPtr] & DSTAR_DATA_SYNC_MASK) ^ DSTAR_DATA_SYNC_DATA) <= maxErrs) { if (countBits64((m_bitBuffer[m_bitPtr] & DSTAR_DATA_SYNC_MASK) ^ DSTAR_DATA_SYNC_DATA) <= maxErrs) {
uint16_t ptr = m_dataPtr + DSTAR_DATA_LENGTH_SAMPLES - DSTAR_DATA_SYNC_LENGTH_SAMPLES + DSTAR_RADIO_SYMBOL_LENGTH; uint16_t ptr = m_dataPtr + DSTAR_DATA_LENGTH_SAMPLES - DSTAR_DATA_SYNC_LENGTH_SAMPLES + DSTAR_RADIO_SYMBOL_LENGTH;
if (ptr >= DSTAR_DATA_LENGTH_SAMPLES) if (ptr >= DSTAR_DATA_LENGTH_SAMPLES)
ptr -= DSTAR_DATA_LENGTH_SAMPLES; ptr -= DSTAR_DATA_LENGTH_SAMPLES;
@@ -817,3 +819,6 @@ bool CDStarRX::checksum(const uint8_t* header) const
return crc8[0U] == header[DSTAR_HEADER_LENGTH_BYTES - 2U] && crc8[1U] == header[DSTAR_HEADER_LENGTH_BYTES - 1U]; return crc8[0U] == header[DSTAR_HEADER_LENGTH_BYTES - 2U] && crc8[1U] == header[DSTAR_HEADER_LENGTH_BYTES - 1U];
} }
#endif
+8 -3
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2015,2016,2017 by Jonathan Naylor G4KLX * Copyright (C) 2015,2016,2017,2020 by Jonathan Naylor G4KLX
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
@@ -16,10 +16,13 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/ */
#include "Config.h"
#if defined(MODE_DSTAR)
#if !defined(DSTARRX_H) #if !defined(DSTARRX_H)
#define DSTARRX_H #define DSTARRX_H
#include "Config.h"
#include "DStarDefines.h" #include "DStarDefines.h"
enum DSRX_STATE { enum DSRX_STATE {
@@ -38,7 +41,7 @@ public:
private: private:
DSRX_STATE m_rxState; DSRX_STATE m_rxState;
uint32_t m_bitBuffer[DSTAR_RADIO_SYMBOL_LENGTH]; uint64_t m_bitBuffer[DSTAR_RADIO_SYMBOL_LENGTH];
q15_t m_headerBuffer[DSTAR_FEC_SECTION_LENGTH_SAMPLES + 2U * DSTAR_RADIO_SYMBOL_LENGTH]; q15_t m_headerBuffer[DSTAR_FEC_SECTION_LENGTH_SAMPLES + 2U * DSTAR_RADIO_SYMBOL_LENGTH];
q15_t m_dataBuffer[DSTAR_DATA_LENGTH_SAMPLES]; q15_t m_dataBuffer[DSTAR_DATA_LENGTH_SAMPLES];
uint16_t m_bitPtr; uint16_t m_bitPtr;
@@ -79,3 +82,5 @@ private:
#endif #endif
#endif
+20 -14
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2009-2017 by Jonathan Naylor G4KLX * Copyright (C) 2009-2017,2020 by Jonathan Naylor G4KLX
* Copyright (C) 2017 by Andy Uribe CA6JAU * Copyright (C) 2017 by Andy Uribe CA6JAU
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
@@ -18,6 +18,9 @@
*/ */
#include "Config.h" #include "Config.h"
#if defined(MODE_DSTAR)
#include "Globals.h" #include "Globals.h"
#include "DStarTX.h" #include "DStarTX.h"
@@ -27,10 +30,8 @@ const uint8_t BIT_SYNC = 0xAAU;
const uint8_t FRAME_SYNC[] = {0xEAU, 0xA6U, 0x00U}; const uint8_t FRAME_SYNC[] = {0xEAU, 0xA6U, 0x00U};
// Generated using gaussfir(0.35, 1, 10) in MATLAB // Generated using gaussfir(0.35, 1, 5) in MATLAB
static q15_t GAUSSIAN_0_35_FILTER[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 1001, 1942, 3514, 5930, static q15_t GAUSSIAN_0_35_FILTER[] = {0, 0, 0, 0, 1001, 3514, 9333, 18751, 28499, 32767, 28499, 18751, 9333, 3514, 1001}; // numTaps = 15, L = 5
9333, 13699, 18751, 23938, 28499, 31644, 32767, 31644,
28499, 23938, 18751, 13699, 9333, 5930, 3514, 1942, 1001}; // numTaps = 30, L = 10
const uint16_t GAUSSIAN_0_35_FILTER_PHASE_LEN = 3U; // phaseLength = numTaps/L const uint16_t GAUSSIAN_0_35_FILTER_PHASE_LEN = 3U; // phaseLength = numTaps/L
const q15_t DSTAR_LEVEL0 = -841; const q15_t DSTAR_LEVEL0 = -841;
@@ -198,7 +199,7 @@ m_poLen(0U),
m_poPtr(0U), m_poPtr(0U),
m_txDelay(60U) // 100ms m_txDelay(60U) // 100ms
{ {
::memset(m_modState, 0x00U, 15U * sizeof(q15_t)); ::memset(m_modState, 0x00U, 20U * sizeof(q15_t));
m_modFilter.L = DSTAR_RADIO_SYMBOL_LENGTH; m_modFilter.L = DSTAR_RADIO_SYMBOL_LENGTH;
m_modFilter.phaseLength = GAUSSIAN_0_35_FILTER_PHASE_LEN; m_modFilter.phaseLength = GAUSSIAN_0_35_FILTER_PHASE_LEN;
@@ -219,11 +220,12 @@ void CDStarTX::process()
m_poBuffer[m_poLen++] = BIT_SYNC; m_poBuffer[m_poLen++] = BIT_SYNC;
} else { } else {
// Pop the type byte off // Pop the type byte off
m_buffer.get(); uint8_t dummy;
m_buffer.get(dummy);
uint8_t header[DSTAR_HEADER_LENGTH_BYTES]; uint8_t header[DSTAR_HEADER_LENGTH_BYTES];
for (uint8_t i = 0U; i < DSTAR_HEADER_LENGTH_BYTES; i++) for (uint8_t i = 0U; i < DSTAR_HEADER_LENGTH_BYTES; i++)
header[i] = m_buffer.get(); m_buffer.get(header[i]);
uint8_t buffer[86U]; uint8_t buffer[86U];
txHeader(header, buffer + 2U); txHeader(header, buffer + 2U);
@@ -241,17 +243,19 @@ void CDStarTX::process()
if (type == DSTAR_DATA && m_poLen == 0U) { if (type == DSTAR_DATA && m_poLen == 0U) {
// Pop the type byte off // Pop the type byte off
m_buffer.get(); uint8_t dummy;
m_buffer.get(dummy);
for (uint8_t i = 0U; i < DSTAR_DATA_LENGTH_BYTES; i++) for (uint8_t i = 0U; i < DSTAR_DATA_LENGTH_BYTES; i++)
m_poBuffer[m_poLen++] = m_buffer.get(); m_buffer.get(m_poBuffer[m_poLen++]);
m_poPtr = 0U; m_poPtr = 0U;
} }
if (type == DSTAR_EOT && m_poLen == 0U) { if (type == DSTAR_EOT && m_poLen == 0U) {
// Pop the type byte off // Pop the type byte off
m_buffer.get(); uint8_t dummy;
m_buffer.get(dummy);
for (uint8_t j = 0U; j < 3U; j++) { for (uint8_t j = 0U; j < 3U; j++) {
for (uint8_t i = 0U; i < DSTAR_END_SYNC_LENGTH_BYTES; i++) for (uint8_t i = 0U; i < DSTAR_END_SYNC_LENGTH_BYTES; i++)
@@ -279,7 +283,7 @@ void CDStarTX::process()
} }
} }
uint8_t CDStarTX::writeHeader(const uint8_t* header, uint8_t length) uint8_t CDStarTX::writeHeader(const uint8_t* header, uint16_t length)
{ {
if (length != DSTAR_HEADER_LENGTH_BYTES) if (length != DSTAR_HEADER_LENGTH_BYTES)
return 4U; return 4U;
@@ -298,7 +302,7 @@ uint8_t CDStarTX::writeHeader(const uint8_t* header, uint8_t length)
return 0U; return 0U;
} }
uint8_t CDStarTX::writeData(const uint8_t* data, uint8_t length) uint8_t CDStarTX::writeData(const uint8_t* data, uint16_t length)
{ {
if (length != DSTAR_DATA_LENGTH_BYTES) if (length != DSTAR_DATA_LENGTH_BYTES)
return 4U; return 4U;
@@ -390,7 +394,7 @@ void CDStarTX::txHeader(const uint8_t* in, uint8_t* out) const
if (i < 660U) { if (i < 660U) {
if (d & 0x08U) if (d & 0x08U)
out[INTERLEAVE_TABLE_TX[i * 2U]] |= (0x01U << INTERLEAVE_TABLE_TX[i * 2U + 1U]); out[INTERLEAVE_TABLE_TX[i * 2U]] |= (0x01U << INTERLEAVE_TABLE_TX[i * 2U + 1U]);
i++; i++;
if (d & 0x04U) if (d & 0x04U)
out[INTERLEAVE_TABLE_TX[i * 2U]] |= (0x01U << INTERLEAVE_TABLE_TX[i * 2U + 1U]); out[INTERLEAVE_TABLE_TX[i * 2U]] |= (0x01U << INTERLEAVE_TABLE_TX[i * 2U + 1U]);
@@ -445,3 +449,5 @@ uint8_t CDStarTX::getSpace() const
return m_buffer.getSpace() / (DSTAR_DATA_LENGTH_BYTES + 1U); return m_buffer.getSpace() / (DSTAR_DATA_LENGTH_BYTES + 1U);
} }
#endif
+12 -8
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2015,2016,2017 by Jonathan Naylor G4KLX * Copyright (C) 2015,2016,2017,2020 by Jonathan Naylor G4KLX
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
@@ -16,19 +16,21 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/ */
#include "Config.h"
#if defined(MODE_DSTAR)
#if !defined(DSTARTX_H) #if !defined(DSTARTX_H)
#define DSTARTX_H #define DSTARTX_H
#include "Config.h" #include "RingBuffer.h"
#include "SerialRB.h"
class CDStarTX { class CDStarTX {
public: public:
CDStarTX(); CDStarTX();
uint8_t writeHeader(const uint8_t* header, uint8_t length); uint8_t writeHeader(const uint8_t* header, uint16_t length);
uint8_t writeData(const uint8_t* data, uint8_t length); uint8_t writeData(const uint8_t* data, uint16_t length);
uint8_t writeEOT(); uint8_t writeEOT();
void process(); void process();
@@ -38,9 +40,9 @@ public:
uint8_t getSpace() const; uint8_t getSpace() const;
private: private:
CSerialRB m_buffer; CRingBuffer<uint8_t> m_buffer;
arm_fir_interpolate_instance_q15 m_modFilter; arm_fir_interpolate_instance_q15 m_modFilter;
q15_t m_modState[15U]; // blockSize + phaseLength - 1, 8 + 3 - 1 plus some spare q15_t m_modState[20U]; // blockSize + phaseLength - 1, 8 + 9 - 1 plus some spare
uint8_t m_poBuffer[600U]; uint8_t m_poBuffer[600U];
uint16_t m_poLen; uint16_t m_poLen;
uint16_t m_poPtr; uint16_t m_poPtr;
@@ -52,3 +54,5 @@ private:
#endif #endif
#endif
+2 -1
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2015,2016,2017 by Jonathan Naylor G4KLX * Copyright (C) 2015,2016,2017,2021 by Jonathan Naylor G4KLX
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
@@ -27,6 +27,7 @@
#define DEBUG3(a,b,c) serial.writeDebug((a),(b),(c)) #define DEBUG3(a,b,c) serial.writeDebug((a),(b),(c))
#define DEBUG4(a,b,c,d) serial.writeDebug((a),(b),(c),(d)) #define DEBUG4(a,b,c,d) serial.writeDebug((a),(b),(c),(d))
#define DEBUG5(a,b,c,d,e) serial.writeDebug((a),(b),(c),(d),(e)) #define DEBUG5(a,b,c,d,e) serial.writeDebug((a),(b),(c),(d),(e))
#define DEBUG_DUMP(a,b) serial.writeDebugDump((a),(b))
#endif #endif
+1357
View File
File diff suppressed because it is too large Load Diff
+151
View File
@@ -0,0 +1,151 @@
/*
* Copyright (C) 2020,2021,2023,2025 by Jonathan Naylor G4KLX
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "Config.h"
#if defined(MODE_FM)
#if !defined(FM_H)
#define FM_H
#include "FMBlanking.h"
#include "FMCTCSSRX.h"
#include "FMCTCSSTX.h"
#include "FMTimeout.h"
#include "FMKeyer.h"
#include "FMTimer.h"
#include "RingBuffer.h"
#include "FMDirectForm1.h"
#include "FMDownSampler.h"
#include "FMUpSampler.h"
#include "FMNoiseSquelch.h"
class CFM {
public:
CFM();
void samples(bool cos, q15_t* samples, const uint16_t* rssi, uint8_t length);
void process();
void reset();
uint8_t setCallsign(const char* callsign, uint8_t speed, uint16_t frequency, uint8_t time, uint8_t holdoff, uint8_t highLevel, uint8_t lowLevel, bool callsignAtStart, bool callsignAtEnd, bool callsignAtLatch);
uint8_t setAck(const char* rfAck, uint8_t speed, uint16_t frequency, uint8_t minTime, uint16_t delay, uint8_t level);
uint8_t setMisc(uint16_t timeout, uint8_t timeoutLevel, uint8_t ctcssFrequency, uint8_t ctcssHighThreshold, uint8_t ctcssLowThreshold, uint8_t ctcssLevel, uint8_t kerchunkTime, uint8_t hangTime, uint8_t accessMode, bool linkMode, bool cosInvert, bool noiseSquelch, uint8_t squelchHighThreshold, uint8_t squelchLowThreshold, uint8_t rfAudioBoost, uint8_t maxDev, uint8_t rxLevel);
uint8_t setExt(const char* ack, uint8_t audioBoost, uint8_t speed, uint16_t frequency, uint8_t level);
uint8_t getSpace() const;
uint8_t writeData(const uint8_t* data, uint16_t length);
private:
CFMKeyer m_callsign;
CFMKeyer m_rfAck;
CFMKeyer m_extAck;
CFMCTCSSRX m_ctcssRX;
CFMCTCSSTX m_ctcssTX;
CFMNoiseSquelch m_squelch;
CFMTimeout m_timeoutTone;
uint8_t m_state;
bool m_callsignAtStart;
bool m_callsignAtEnd;
bool m_callsignAtLatch;
CFMTimer m_callsignTimer;
CFMTimer m_timeoutTimer;
CFMTimer m_holdoffTimer;
CFMTimer m_kerchunkTimer;
CFMTimer m_ackMinTimer;
CFMTimer m_ackDelayTimer;
CFMTimer m_hangTimer;
CFMTimer m_reverseTimer;
CFMTimer m_extGapTimer; // debounce for link-mode ext-audio underrun, see linkStateMachine()
bool m_needReverse;
CFMDirectFormI m_filterStage1;
CFMDirectFormI m_filterStage2;
CFMDirectFormI m_filterStage3;
CFMDirectFormI m_dsFilterStage1; // anti-alias filter for the downsampler, own state
CFMDirectFormI m_dsFilterStage2;
CFMDirectFormI m_dsFilterStage3;
CFMDirectFormI m_usFilterStage1; // reconstruction filter for the upsampler, own state
CFMDirectFormI m_usFilterStage2;
CFMDirectFormI m_usFilterStage3;
CFMBlanking m_blanking;
uint8_t m_accessMode;
bool m_linkMode;
bool m_cosInvert;
bool m_noiseSquelch;
q15_t m_rfAudioBoost;
q15_t m_extAudioBoost;
CFMDownSampler m_downSampler;
bool m_extEnabled;
q15_t m_rxLevel;
CRingBuffer<q15_t> m_inputRFRB;
CRingBuffer<q15_t> m_outputRFRB;
CFMUpSampler m_inputExtRB;
bool m_rfSignal;
bool m_extSignal;
uint32_t m_rssiAccum;
uint16_t m_rssiCount;
void stateMachine(bool validRFSignal, bool validExtSignal);
void repeaterSamples(bool cos, q15_t* samples, const uint16_t* rssi, uint8_t length);
void linkSamples(bool cos, q15_t* samples, uint8_t length);
void duplexStateMachine(bool validRFSignal, bool validExtSignal);
void listeningStateDuplex(bool validRFSignal, bool validExtSignal);
void kerchunkRFStateDuplex(bool validSignal);
void relayingRFStateDuplex(bool validSignal);
void relayingRFWaitStateDuplex(bool validSignal);
void timeoutRFStateDuplex(bool validSignal);
void timeoutRFWaitStateDuplex(bool validSignal);
void kerchunkExtStateDuplex(bool validSignal);
void relayingExtStateDuplex(bool validSignal);
void relayingExtWaitStateDuplex(bool validSignal);
void timeoutExtStateDuplex(bool validSignal);
void timeoutExtWaitStateDuplex(bool validSignal);
void hangStateDuplex(bool validRFSignal, bool validExtSignal);
void simplexStateMachine(bool validRFSignal, bool validExtSignal);
void listeningStateSimplex(bool validRFSignal, bool validExtSignal);
void relayingRFStateSimplex(bool validSignal);
void relayingRFWaitStateSimplex(bool validSignal);
void timeoutRFStateSimplex(bool validSignal);
void timeoutRFWaitStateSimplex(bool validSignal);
void relayingExtStateSimplex(bool validSignal);
void relayingExtWaitStateSimplex(bool validSignal);
void timeoutExtStateSimplex(bool validSignal);
void timeoutExtWaitStateSimplex(bool validSignal);
void linkStateMachine(bool validRFSignal, bool validExtSignal);
void clock(uint8_t length);
void sendCallsign();
void beginRelaying();
void insertDelay(uint16_t ms);
void insertSilence(uint16_t ms);
};
#endif
#endif
+88
View File
@@ -0,0 +1,88 @@
/*
* Copyright (C) 2020 by Jonathan Naylor G4KLX
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "Config.h"
#if defined(MODE_FM)
#include "Globals.h"
#include "FMBlanking.h"
// 2000 Hz sine wave at 24000 Hz sample rate
const q31_t TONE[] = {0, 16384, 28378, 32767, 28378, 16384, 0, -16383, -28377, -32767, -28377, -16383};
const uint8_t TONE_LEN = 12U;
const uint32_t BLEEP_LEN = 2400U; // 100ms
CFMBlanking::CFMBlanking() :
m_posValue(0),
m_negValue(0),
m_level(128 * 128),
m_running(false),
m_pos(0U),
m_n(0U)
{
}
void CFMBlanking::setParams(uint8_t value, uint8_t level)
{
m_posValue = q15_t(value * 128);
m_negValue = -m_posValue;
m_level = q15_t(level * 128);
}
q15_t CFMBlanking::process(q15_t sample)
{
if (m_posValue == 0)
return sample;
if (!m_running) {
if (sample >= m_posValue) {
m_running = true;
m_pos = 0U;
m_n = 0U;
} else if (sample <= m_negValue) {
m_running = true;
m_pos = 0U;
m_n = 0U;
}
}
if (!m_running)
return sample;
if (m_pos <= BLEEP_LEN) {
q31_t value = TONE[m_n++] * m_level;
sample = q15_t(__SSAT((value >> 15), 16));
if (m_n >= TONE_LEN)
m_n = 0U;
} else {
sample = 0;
}
m_pos++;
if (m_pos >= 12000U)
m_running = false;
return sample;
}
#endif
+46
View File
@@ -0,0 +1,46 @@
/*
* Copyright (C) 2020 by Jonathan Naylor G4KLX
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "Config.h"
#if defined(MODE_FM)
#if !defined(FMBlanking_H)
#define FMBlanking_H
class CFMBlanking {
public:
CFMBlanking();
void setParams(uint8_t value, uint8_t level);
q15_t process(q15_t sample);
private:
q15_t m_posValue;
q15_t m_negValue;
q15_t m_level;
bool m_running;
uint32_t m_pos;
uint8_t m_n;
};
#endif
#endif
+181
View File
@@ -0,0 +1,181 @@
/*
* Copyright (C) 2020 by Jonathan Naylor G4KLX
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "Config.h"
#if defined(MODE_FM)
#include "Globals.h"
#include "FMCTCSSRX.h"
const struct RX_CTCSS_TABLE {
uint8_t frequency;
q63_t coeffDivTwo;
} RX_CTCSS_TABLE_DATA[] = {
{ 67U, 2147153298},
{ 69U, 2147130228},
{ 71U, 2147103212},
{ 74U, 2147076297},
{ 77U, 2147047330},
{ 79U, 2147016195},
{ 82U, 2146982775},
{ 85U, 2146946945},
{ 88U, 2146907275},
{ 91U, 2146867538},
{ 94U, 2146822298},
{ 97U, 2146785526},
{100U, 2146747759},
{103U, 2146695349},
{107U, 2146637984},
{110U, 2146578604},
{114U, 2146513835},
{118U, 2146445080},
{123U, 2146370355},
{127U, 2146291161},
{131U, 2146205372},
{136U, 2146112589},
{141U, 2146014479},
{146U, 2145910829},
{151U, 2145796971},
{156U, 2145676831},
{159U, 2145604646},
{162U, 2145547790},
{165U, 2145468230},
{167U, 2145409363},
{171U, 2145324517},
{173U, 2145261046},
{177U, 2145170643},
{179U, 2145102321},
{183U, 2145006080},
{186U, 2144932648},
{189U, 2144830280},
{192U, 2144748638},
{196U, 2144639788},
{199U, 2144555290},
{203U, 2144436713},
{206U, 2144346237},
{210U, 2144217348},
{218U, 2143983951},
{225U, 2143735870},
{229U, 2143622139},
{233U, 2143469001},
{241U, 2143182299},
{250U, 2142874683},
{254U, 2142733729}};
const uint8_t CTCSS_TABLE_DATA_LEN = 50U;
// 4Hz bandwidth
const uint16_t N = 24000U / 4U;
CFMCTCSSRX::CFMCTCSSRX() :
m_coeffDivTwo(0),
m_highThreshold(0),
m_lowThreshold(0),
m_count(0U),
m_q0(0),
m_q1(0),
m_state(false)
{
}
uint8_t CFMCTCSSRX::setParams(uint8_t frequency, uint8_t highThreshold, uint8_t lowThreshold)
{
m_coeffDivTwo = 0;
for (uint8_t i = 0U; i < CTCSS_TABLE_DATA_LEN; i++) {
if (RX_CTCSS_TABLE_DATA[i].frequency == frequency) {
m_coeffDivTwo = RX_CTCSS_TABLE_DATA[i].coeffDivTwo;
break;
}
}
if (m_coeffDivTwo == 0)
return 4U;
m_highThreshold = q31_t(highThreshold);
m_lowThreshold = q31_t(lowThreshold);
return 0U;
}
bool CFMCTCSSRX::process(q15_t sample)
{
//get more dynamic into the decoder by multiplying the sample by 1.5
q31_t sample31 = q31_t(sample) + (q31_t(sample) >> 1);
q31_t q2 = m_q1;
m_q1 = m_q0;
// Q31 multiplication, t3 = m_coeffDivTwo * 2 * m_q1
q63_t t1 = m_coeffDivTwo * m_q1;
q31_t t2 = __SSAT((t1 >> 31), 31);
q31_t t3 = t2 * 2;
// m_q0 = m_coeffDivTwo * m_q1 * 2 - q2 + sample
m_q0 = t3 - q2 + sample31;
m_count++;
if (m_count == N) {
// Q31 multiplication, t2 = m_q0 * m_q0
q63_t t1 = q63_t(m_q0) * q63_t(m_q0);
q31_t t2 = __SSAT((t1 >> 31), 31);
// Q31 multiplication, t4 = m_q0 * m_q0
q63_t t3 = q63_t(m_q1) * q63_t(m_q1);
q31_t t4 = __SSAT((t3 >> 31), 31);
// Q31 multiplication, t9 = m_q0 * m_q1 * m_coeffDivTwo * 2
q63_t t5 = q63_t(m_q0) * q63_t(m_q1);
q31_t t6 = __SSAT((t5 >> 31), 31);
q63_t t7 = t6 * m_coeffDivTwo;
q31_t t8 = __SSAT((t7 >> 31), 31);
q31_t t9 = t8 * 2;
// value = m_q0 * m_q0 + m_q1 * m_q1 - m_q0 * m_q1 * m_coeffDivTwo * 2
q31_t value = t2 + t4 - t9;
bool previousState = m_state;
q31_t threshold = m_highThreshold;
if (previousState)
threshold = m_lowThreshold;
m_state = value >= threshold;
if (previousState != m_state)
DEBUG4("CTCSS Value / Threshold / Valid", value, threshold, m_state);
m_count = 0U;
m_q0 = 0;
m_q1 = 0;
}
return m_state;
}
void CFMCTCSSRX::reset()
{
m_q0 = 0;
m_q1 = 0;
m_state = false;
m_count = 0U;
}
#endif
+49
View File
@@ -0,0 +1,49 @@
/*
* Copyright (C) 2020 by Jonathan Naylor G4KLX
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "Config.h"
#if defined(MODE_FM)
#if !defined(FMCTCSSRX_H)
#define FMCTCSSRX_H
class CFMCTCSSRX {
public:
CFMCTCSSRX();
uint8_t setParams(uint8_t frequency, uint8_t highThreshold, uint8_t lowThreshold);
bool process(q15_t sample);
void reset();
private:
q63_t m_coeffDivTwo;
q31_t m_highThreshold;
q31_t m_lowThreshold;
uint16_t m_count;
q31_t m_q0;
q31_t m_q1;
bool m_state;
};
#endif
#endif
+134
View File
@@ -0,0 +1,134 @@
/*
* Copyright (C) 2020 by Jonathan Naylor G4KLX
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "Config.h"
#if defined(MODE_FM)
#include "Globals.h"
#include "FMCTCSSTX.h"
const struct TX_CTCSS_TABLE {
uint8_t frequency;
uint16_t length;
q31_t increment;
} TX_CTCSS_TABLE_DATA[] = {
{ 67U, 358U, 5995059},
{ 69U, 346U, 6200860},
{ 71U, 334U, 6433504},
{ 74U, 323U, 6657200},
{ 77U, 312U, 6889844},
{ 79U, 301U, 7131436},
{ 82U, 291U, 7381976},
{ 85U, 281U, 7641463},
{ 88U, 271U, 7918846},
{ 91U, 262U, 8187282},
{ 94U, 253U, 8482561},
{ 97U, 246U, 8715205},
{100U, 240U, 8947849},
{103U, 232U, 9261024},
{107U, 224U, 9592094},
{110U, 216U, 9923165},
{114U, 209U, 10272131},
{118U, 202U, 10630045},
{123U, 195U, 11005854},
{127U, 189U, 11390612},
{131U, 182U, 11793265},
{136U, 176U, 12213814},
{141U, 170U, 12643310},
{146U, 164U, 13081755},
{151U, 159U, 13547043},
{156U, 153U, 14021279},
{159U, 150U, 14298662},
{162U, 148U, 14513411},
{165U, 145U, 14808690},
{167U, 143U, 15023438},
{171U, 140U, 15327665},
{173U, 138U, 15551361},
{177U, 135U, 15864536},
{179U, 133U, 16097180},
{183U, 131U, 16419303},
{186U, 129U, 16660894},
{189U, 126U, 16991965},
{192U, 124U, 17251452},
{196U, 122U, 17591471},
{199U, 120U, 17850958},
{203U, 118U, 18208872},
{206U, 116U, 18477308},
{210U, 114U, 18853117},
{218U, 110U, 19515258},
{225U, 106U, 20195295},
{229U, 105U, 20499521},
{233U, 103U, 20902175},
{241U, 99U, 21635898},
{250U, 96U, 22396465},
{254U, 94U, 22736484}};
const uint8_t CTCSS_TABLE_DATA_LEN = 50U;
CFMCTCSSTX::CFMCTCSSTX() :
m_values(NULL),
m_length(0U),
m_n(0U)
{
}
uint8_t CFMCTCSSTX::setParams(uint8_t frequency, uint8_t level)
{
const TX_CTCSS_TABLE* entry = NULL;
for (uint8_t i = 0U; i < CTCSS_TABLE_DATA_LEN; i++) {
if (TX_CTCSS_TABLE_DATA[i].frequency == frequency) {
entry = TX_CTCSS_TABLE_DATA + i;
break;
}
}
if (entry == NULL)
return 4U;
m_length = entry->length;
delete[] m_values;
m_values = new q15_t[m_length];
q31_t arg = 0;
for (uint16_t i = 0U; i < m_length; i++) {
q63_t value = ::arm_sin_q31(arg) * q63_t(level * 13);
m_values[i] = q15_t(__SSAT((value >> 31), 16));
arg += entry->increment;
}
return 0U;
}
q15_t CFMCTCSSTX::getAudio(bool reverse)
{
q15_t sample = m_values[m_n++];
if (m_n >= m_length)
m_n = 0U;
if (reverse)
return -sample;
else
return sample;
}
#endif
+43
View File
@@ -0,0 +1,43 @@
/*
* Copyright (C) 2020 by Jonathan Naylor G4KLX
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "Config.h"
#if defined(MODE_FM)
#if !defined(FMCTCSSTX_H)
#define FMCTCSSTX_H
class CFMCTCSSTX {
public:
CFMCTCSSTX();
uint8_t setParams(uint8_t frequency, uint8_t level);
q15_t getAudio(bool reverse);
private:
q15_t* m_values;
uint16_t m_length;
uint16_t m_n;
};
#endif
#endif
+113
View File
@@ -0,0 +1,113 @@
/*******************************************************************************
This header file has been taken from:
"A Collection of Useful C++ Classes for Digital Signal Processing"
By Vinnie Falco
Bernd Porr adapted it for Linux and turned it into a filter using
fixed point arithmetic.
--------------------------------------------------------------------------------
License: MIT License (http://www.opensource.org/licenses/mit-license.php)
Copyright (c) 2009 by Vinnie Falco
Copyright (C) 2013-2017, Bernd Porr, [email protected]
Copyright (C) 2020 , Mario Molitor , [email protected]
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.
*******************************************************************************/
// based on https://raw.githubusercontent.com/berndporr/iir_fixed_point/master/DirectFormI.h
#include "Config.h"
#if defined(MODE_FM)
#include <cstdint>
#ifndef DIRECTFORMI_H_
#define DIRECTFORMI_H_
class CFMDirectFormI
{
public:
// convenience function which takes the a0 argument but ignores it!
CFMDirectFormI(const q31_t b0, const q31_t b1, const q31_t b2, const q31_t, const q31_t a1, const q31_t a2)
{
// FIR coefficients
c_b0 = b0;
c_b1 = b1;
c_b2 = b2;
// IIR coefficients
c_a1 = a1;
c_a2 = a2;
reset();
}
CFMDirectFormI(const CFMDirectFormI &my)
{
// delay line
m_x2 = my.m_x2; // x[n-2]
m_y2 = my.m_y2; // y[n-2]
m_x1 = my.m_x1; // x[n-1]
m_y1 = my.m_y1; // y[n-1]
// coefficients
c_b0 = my.c_b0;
c_b1 = my.c_b1;
c_b2 = my.c_b2; // FIR
c_a1 = my.c_a1;
c_a2 = my.c_a2; // IIR
}
void reset()
{
m_x1 = 0;
m_x2 = 0;
m_y1 = 0;
m_y2 = 0;
}
// filtering operation: one sample in and one out
inline q15_t filter(const q15_t in)
{
// calculate the output
q31_t out_upscaled = c_b0 * in + c_b1 * m_x1 + c_b2 * m_x2 - c_a1 * m_y1 - c_a2 * m_y2;
q15_t out = __SSAT(out_upscaled >> 15, 15);
// update the delay lines
m_x2 = m_x1;
m_y2 = m_y1;
m_x1 = in;
m_y1 = out;
return out;
}
private:
// delay line
q31_t m_x2; // x[n-2]
q31_t m_y2; // y[n-2]
q31_t m_x1; // x[n-1]
q31_t m_y1; // y[n-1]
// coefficients
q31_t c_b0,c_b1,c_b2; // FIR
q31_t c_a1,c_a2; // IIR
};
#endif /* DIRECTFORMI_H */
#endif
+83
View File
@@ -0,0 +1,83 @@
/*
* Copyright (C) 2020 by Jonathan Naylor G4KLX
* Copyright (C) 2020 by Geoffrey Merck F4FXL - KC3FRA
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "Config.h"
#if defined(MODE_FM)
#include "FMDownSampler.h"
CFMDownSampler::CFMDownSampler(uint16_t length) :
m_ringBuffer(length),
m_samplePack(0U),
m_samplePackPointer(NULL),
m_sampleIndex(0U)
{
m_samplePackPointer = (uint8_t*)&m_samplePack;
}
void CFMDownSampler::addSample(q15_t sample)
{
sample = __SSAT(sample, 12);//clamp before packing to 12 bits
uint32_t usample = uint32_t(int32_t(sample) + 2048);
//only take one of three samples
switch(m_sampleIndex){
case 0:
m_samplePack = usample << 12;
break;
case 3:{
m_samplePack |= usample;
//we did not use MSB; skip it
TSamplePairPack pair{m_samplePackPointer[0U], m_samplePackPointer[1U], m_samplePackPointer[2U]};
m_ringBuffer.put(pair);
m_samplePack = 0U;//reset the sample pack
}
break;
default:
//Just skip this sample
break;
}
m_sampleIndex++;
if (m_sampleIndex >= 6U)//did we pack two samples ?
m_sampleIndex = 0U;
}
bool CFMDownSampler::getPackedData(TSamplePairPack& data)
{
return m_ringBuffer.get(data);
}
uint16_t CFMDownSampler::getData()
{
return m_ringBuffer.getData();
}
void CFMDownSampler::reset()
{
m_sampleIndex = 0U;
m_samplePack = 0U;
m_ringBuffer.reset();
}
#endif
+52
View File
@@ -0,0 +1,52 @@
/*
* Copyright (C) 2020 by Jonathan Naylor G4KLX
* Copyright (C) 2020 by Geoffrey Merck F4FXL - KC3FRA
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "Config.h"
#if defined(MODE_FM)
#if !defined(FMDOWNSAMPLER_H)
#define FMDOWNSAMPLER_H
#include "RingBuffer.h"
#include "FMSamplePairPack.h"
class CFMDownSampler {
public:
CFMDownSampler(uint16_t length);
void addSample(q15_t sample);
bool getPackedData(TSamplePairPack& data);
uint16_t getData();
void reset();
private:
CRingBuffer<TSamplePairPack> m_ringBuffer;
uint32_t m_samplePack;
uint8_t* m_samplePackPointer;
uint8_t m_sampleIndex;
};
#endif
#endif
+222
View File
@@ -0,0 +1,222 @@
/*
* Copyright (C) 2020 by Jonathan Naylor G4KLX
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "Config.h"
#if defined(MODE_FM)
#include "Globals.h"
#include "FMKeyer.h"
const struct {
char c;
uint32_t pattern;
uint8_t length;
} SYMBOL_LIST[] = {
{'A', 0xB8000000U, 8U},
{'B', 0xEA800000U, 12U},
{'C', 0xEBA00000U, 14U},
{'D', 0xEA000000U, 10U},
{'E', 0x80000000U, 4U},
{'F', 0xAE800000U, 12U},
{'G', 0xEE800000U, 12U},
{'H', 0xAA000000U, 10U},
{'I', 0xA0000000U, 6U},
{'J', 0xBBB80000U, 16U},
{'K', 0xEB800000U, 12U},
{'L', 0xBA800000U, 12U},
{'M', 0xEE000000U, 10U},
{'N', 0xE8000000U, 8U},
{'O', 0xEEE00000U, 14U},
{'P', 0xBBA00000U, 14U},
{'Q', 0xEEB80000U, 16U},
{'R', 0xBA000000U, 10U},
{'S', 0xA8000000U, 8U},
{'T', 0xE0000000U, 6U},
{'U', 0xAE000000U, 10U},
{'V', 0xAB800000U, 12U},
{'W', 0xBB800000U, 12U},
{'X', 0xEAE00000U, 14U},
{'Y', 0xEBB80000U, 16U},
{'Z', 0xEEA00000U, 14U},
{'1', 0xBBBB8000U, 20U},
{'2', 0xAEEE0000U, 18U},
{'3', 0xABB80000U, 16U},
{'4', 0xAAE00000U, 14U},
{'5', 0xAA800000U, 12U},
{'6', 0xEAA00000U, 14U},
{'7', 0xEEA80000U, 16U},
{'8', 0xEEEA0000U, 18U},
{'9', 0xEEEE8000U, 20U},
{'0', 0xEEEEE000U, 22U},
{'/', 0xEAE80000U, 16U},
{'?', 0xAEEA0000U, 18U},
{',', 0xEEAEE000U, 22U},
{'-', 0xEAAE0000U, 18U},
{'=', 0xEAB80000U, 16U},
{'.', 0xBAEB8000U, 20U},
{' ', 0x00000000U, 4U},
{0U, 0x00000000U, 0U}
};
const uint8_t BIT_MASK_TABLE[] = {0x80U, 0x40U, 0x20U, 0x10U, 0x08U, 0x04U, 0x02U, 0x01U};
#define WRITE_BIT_FM(p,i,b) p[(i)>>3] = (b) ? (p[(i)>>3] | BIT_MASK_TABLE[(i)&7]) : (p[(i)>>3] & ~BIT_MASK_TABLE[(i)&7])
#define READ_BIT_FM(p,i) (p[(i)>>3] & BIT_MASK_TABLE[(i)&7])
CFMKeyer::CFMKeyer() :
m_wanted(false),
m_poBuffer(),
m_poLen(0U),
m_poPos(0U),
m_dotLen(0U),
m_dotPos(0U),
m_audio(NULL),
m_audioLen(0U),
m_audioPos(0U),
m_highLevel(0U),
m_lowLevel(0)
{
}
uint8_t CFMKeyer::setParams(const char* text, uint8_t speed, uint16_t frequency, uint8_t highLevel, uint8_t lowLevel)
{
m_poLen = 0U;
for (uint8_t i = 0U; text[i] != '\0'; i++) {
for (uint8_t j = 0U; SYMBOL_LIST[j].c != 0U; j++) {
if (SYMBOL_LIST[j].c == text[i]) {
uint32_t MASK = 0x80000000U;
for (uint8_t k = 0U; k < SYMBOL_LIST[j].length; k++, m_poLen++, MASK >>= 1) {
bool b = (SYMBOL_LIST[j].pattern & MASK) == MASK;
WRITE_BIT_FM(m_poBuffer, m_poLen, b);
if (m_poLen >= 995U) {
m_poLen = 0U;
return 4U;
}
}
break;
}
}
}
m_highLevel = q15_t(highLevel);
m_lowLevel = q15_t(lowLevel);
m_dotLen = 24000U / speed; // In samples
m_audioLen = 24000U / frequency; // In samples
delete[] m_audio;
m_audio = new bool[m_audioLen];
for (uint16_t i = 0U; i < m_audioLen; i++) {
if (i < (m_audioLen / 2U))
m_audio[i] = true;
else
m_audio[i] = false;
}
return 0U;
}
q15_t CFMKeyer::getHighAudio()
{
q15_t output = 0U;
if (!m_wanted)
return 0U;
bool b = READ_BIT_FM(m_poBuffer, m_poPos);
if (b)
output = m_audio[m_audioPos] ? m_highLevel : -m_highLevel;
m_audioPos++;
if (m_audioPos >= m_audioLen)
m_audioPos = 0U;
m_dotPos++;
if (m_dotPos >= m_dotLen) {
m_dotPos = 0U;
m_poPos++;
if (m_poPos >= m_poLen) {
stop();
return output;
}
}
return output;
}
q15_t CFMKeyer::getLowAudio()
{
q15_t output = 0U;
if (!m_wanted)
return 0U;
bool b = READ_BIT_FM(m_poBuffer, m_poPos);
if (b)
output = m_audio[m_audioPos] ? m_lowLevel : -m_lowLevel;
m_audioPos++;
if (m_audioPos >= m_audioLen)
m_audioPos = 0U;
m_dotPos++;
if (m_dotPos >= m_dotLen) {
m_dotPos = 0U;
m_poPos++;
if (m_poPos >= m_poLen) {
stop();
return output;
}
}
return output;
}
void CFMKeyer::start()
{
if (isRunning())
return;
m_wanted = true;
m_poPos = 0U;
m_dotPos = 0U;
m_audioPos = 0U;
}
void CFMKeyer::stop()
{
m_wanted = false;
m_poPos = 0U;
m_dotPos = 0U;
m_audioPos = 0U;
}
bool CFMKeyer::isWanted() const
{
return m_wanted;
}
bool CFMKeyer::isRunning() const
{
return m_poPos > 0U || m_dotPos > 0U || m_audioPos > 0U;
}
#endif
+59
View File
@@ -0,0 +1,59 @@
/*
* Copyright (C) 2020 by Jonathan Naylor G4KLX
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "Config.h"
#if defined(MODE_FM)
#if !defined(FMKeyer_H)
#define FMKeyer_H
class CFMKeyer {
public:
CFMKeyer();
uint8_t setParams(const char* text, uint8_t speed, uint16_t frequency, uint8_t highLevel, uint8_t lowLevel);
q15_t getHighAudio();
q15_t getLowAudio();
void start();
void stop();
bool isRunning() const;
bool isWanted() const;
private:
bool m_wanted;
uint8_t m_poBuffer[1000U];
uint16_t m_poLen;
uint16_t m_poPos;
uint16_t m_dotLen;
uint16_t m_dotPos;
bool* m_audio;
uint16_t m_audioLen;
uint16_t m_audioPos;
q15_t m_highLevel;
q15_t m_lowLevel;
};
#endif
#endif
+136
View File
@@ -0,0 +1,136 @@
/*
* Copyright (C) 2020 by Jonathan Naylor G4KLX
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "Config.h"
#if defined(MODE_FM)
#include "Globals.h"
#include "FMNoiseSquelch.h"
// 4500Hz centre frequency
const q31_t COEFF_DIV_TWO = 821806413;
// 400Hz bandwidth
const uint16_t N = 24000U / 400U;
CFMNoiseSquelch::CFMNoiseSquelch() :
m_highThreshold(0),
m_lowThreshold(0),
m_count(0U),
m_q0(0),
m_q1(0),
m_state(false),
m_validCount(0U),
m_invalidCount(0U)
{
}
void CFMNoiseSquelch::setParams(uint8_t highThreshold, uint8_t lowThreshold)
{
m_highThreshold = q31_t(highThreshold);
m_lowThreshold = q31_t(lowThreshold);
}
bool CFMNoiseSquelch::process(q15_t sample)
{
//get more dynamic into the decoder by multiplying the sample by 64
q31_t sample31 = q31_t(sample) << 6; //+ (q31_t(sample) >> 1);
q31_t q2 = m_q1;
m_q1 = m_q0;
// Q31 multiplication, t3 = m_coeffDivTwo * 2 * m_q1
q63_t t1 = COEFF_DIV_TWO * m_q1;
q31_t t2 = __SSAT((t1 >> 31), 31);
q31_t t3 = t2 * 2;
// m_q0 = m_coeffDivTwo * m_q1 * 2 - q2 + sample
m_q0 = t3 - q2 + sample31;
m_count++;
if (m_count == N) {
// Q31 multiplication, t2 = m_q0 * m_q0
q63_t t1 = q63_t(m_q0) * q63_t(m_q0);
q31_t t2 = __SSAT((t1 >> 31), 31);
// Q31 multiplication, t4 = m_q0 * m_q0
q63_t t3 = q63_t(m_q1) * q63_t(m_q1);
q31_t t4 = __SSAT((t3 >> 31), 31);
// Q31 multiplication, t9 = m_q0 * m_q1 * m_coeffDivTwo * 2
q63_t t5 = q63_t(m_q0) * q63_t(m_q1);
q31_t t6 = __SSAT((t5 >> 31), 31);
q63_t t7 = t6 * COEFF_DIV_TWO;
q31_t t8 = __SSAT((t7 >> 31), 31);
q31_t t9 = t8 * 2;
// value = m_q0 * m_q0 + m_q1 * m_q1 - m_q0 * m_q1 * m_coeffDivTwo * 2
q31_t value = t2 + t4 - t9;
bool previousState = m_state;
q31_t threshold = m_highThreshold;
if (previousState)
threshold = m_lowThreshold;
if (!m_state) {
if (value < threshold)
m_validCount++;
else
m_validCount = 0U;
}
if (m_state) {
if (value >= threshold)
m_invalidCount++;
else
m_invalidCount = 0U;
}
m_state = m_validCount >= 10U && m_invalidCount < 10U;
if(previousState && !m_state)
m_invalidCount = 0U;
if (previousState != m_state) {
DEBUG4("Noise Squelch Value / Threshold / Valid", value, threshold, m_state);
DEBUG3("Valid Count / Invalid Count", m_validCount, m_invalidCount);
}
m_count = 0U;
m_q0 = 0;
m_q1 = 0;
}
return m_state;
}
void CFMNoiseSquelch::reset()
{
m_q0 = 0;
m_q1 = 0;
m_state = false;
m_count = 0U;
m_validCount = 0U;
m_invalidCount = 0U;
}
#endif
+50
View File
@@ -0,0 +1,50 @@
/*
* Copyright (C) 2020 by Jonathan Naylor G4KLX
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "Config.h"
#if defined(MODE_FM)
#if !defined(FMNOISESQUELCH_H)
#define FMNOISESQUELCH_H
class CFMNoiseSquelch {
public:
CFMNoiseSquelch();
void setParams(uint8_t highThreshold, uint8_t lowThreshold);
bool process(q15_t sample);
void reset();
private:
q31_t m_highThreshold;
q31_t m_lowThreshold;
uint16_t m_count;
q31_t m_q0;
q31_t m_q1;
bool m_state;
uint8_t m_validCount;
uint8_t m_invalidCount;
};
#endif
#endif
+36
View File
@@ -0,0 +1,36 @@
/*
* Copyright (C) 2020 by Jonathan Naylor G4KLX
* Copyright (C) 2020 by Geoffrey Merck F4FXL - KC3FRA
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "Config.h"
#if defined(MODE_FM)
#if !defined(TSAMPLEPACK_H)
#define TSAMPLEPACK_H
struct TSamplePairPack {
uint8_t byte0;
uint8_t byte1;
uint8_t byte2;
};
#endif
#endif
+80
View File
@@ -0,0 +1,80 @@
/*
* Copyright (C) 2020 by Jonathan Naylor G4KLX
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "Config.h"
#if defined(MODE_FM)
#include "Globals.h"
#include "FMTimeout.h"
// 400 Hz sine wave at 24000 Hz sample rate
const q15_t BUSY_AUDIO[] = {0, 3426, 6813, 10126, 13328, 16384, 19261, 21926, 24351, 26510, 28378, 29935, 31164, 32052, 32588, 32767, 32588, 32052, 31164, 29935, 28378, 26510, 24351,
21926, 19261, 16384, 13328, 10126, 6813, 3425, 0, -3425, -6813, -10126, -13328, -16384, -19261, -21926, -24351, -26510, -28378, -29935, -31164, -32052,
-32588, -32768, -32588, -32052, -31164, -29935, -28378, -26510, -24351, -21926, -19261, -16384, -13328, -10126, -6813, -3425};
const uint8_t BUSY_AUDIO_LEN = 60U;
CFMTimeout::CFMTimeout() :
m_level(128 * 128),
m_running(false),
m_pos(0U),
m_n(0U)
{
}
void CFMTimeout::setParams(uint8_t level)
{
m_level = q15_t(level * 5);
}
q15_t CFMTimeout::getAudio()
{
q15_t sample = 0;
if (!m_running)
return sample;
if (m_pos >= 12000U) {
q31_t sample31 = BUSY_AUDIO[m_n] * m_level;
sample = q15_t(__SSAT((sample31 >> 15), 16));
m_n++;
if (m_n >= BUSY_AUDIO_LEN)
m_n = 0U;
}
m_pos++;
if (m_pos >= 24000U)
m_pos = 0U;
return sample;
}
void CFMTimeout::start()
{
m_running = true;
m_pos = 0U;
m_n = 0U;
}
void CFMTimeout::stop()
{
m_running = false;
}
#endif
+47
View File
@@ -0,0 +1,47 @@
/*
* Copyright (C) 2020 by Jonathan Naylor G4KLX
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "Config.h"
#if defined(MODE_FM)
#if !defined(FMTimeout_H)
#define FMTimeout_H
class CFMTimeout {
public:
CFMTimeout();
void setParams(uint8_t level);
void start();
void stop();
q15_t getAudio();
private:
q15_t m_level;
bool m_running;
uint32_t m_pos;
uint8_t m_n;
};
#endif
#endif
+76
View File
@@ -0,0 +1,76 @@
/*
* Copyright (C) 2009,2010,2015,2020 by Jonathan Naylor G4KLX
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "Config.h"
#if defined(MODE_FM)
#include "Globals.h"
#include "FMTimer.h"
CFMTimer::CFMTimer() :
m_timeout(0U),
m_timer(0U)
{
}
void CFMTimer::setTimeout(uint16_t secs, uint32_t msecs)
{
m_timeout = (secs * 24000U) + (msecs * 24U);
}
uint32_t CFMTimer::getTimeout() const
{
return m_timeout / 24U;
}
void CFMTimer::start()
{
if (m_timeout > 0U)
m_timer = 1U;
}
void CFMTimer::stop()
{
m_timer = 0U;
}
void CFMTimer::clock(uint8_t length)
{
if (m_timer > 0U && m_timeout > 0U)
m_timer += length;
}
bool CFMTimer::isRunning() const
{
return m_timer > 0U;
}
bool CFMTimer::hasExpired() const
{
if (m_timeout == 0U || m_timer == 0U)
return false;
if (m_timer > m_timeout)
return true;
return false;
}
#endif
+52
View File
@@ -0,0 +1,52 @@
/*
* Copyright (C) 2009,2010,2015,2020 by Jonathan Naylor G4KLX
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "Config.h"
#if defined(MODE_FM)
#if !defined(FMTimer_H)
#define FMTimer_H
class CFMTimer {
public:
CFMTimer();
void setTimeout(uint16_t secs, uint32_t msecs);
uint32_t getTimeout() const;
void start();
void stop();
void clock(uint8_t length);
bool isRunning() const;
bool hasExpired() const;
private:
uint32_t m_timeout;
uint32_t m_timer;
};
#endif
#endif
+104
View File
@@ -0,0 +1,104 @@
/*
* Copyright (C) 2020 by Jonathan Naylor G4KLX
* Copyright (C) 2020 by Geoffrey Merck F4FXL - KC3FRA
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "Config.h"
#if defined(MODE_FM)
#include "FMUpSampler.h"
const uint32_t FM_UPSAMPLE_MASK = 0x00000FFFU;
CFMUpSampler::CFMUpSampler() :
m_upSampleIndex(0),
m_pack(0U),
m_packPointer(NULL),
m_samples(3600U), //300ms of 12 bit 8kHz audio
m_running(false)
{
m_packPointer = (uint8_t*)&m_pack;
}
void CFMUpSampler::reset()
{
m_upSampleIndex = 0U;
m_pack = 0U;
m_samples.reset();
m_running = false;
}
void CFMUpSampler::addData(const uint8_t* data, uint16_t length)
{
TSamplePairPack* packPointer = (TSamplePairPack*)data;
TSamplePairPack* packPointerEnd = packPointer + (length / 3U);
while(packPointer != packPointerEnd) {
m_samples.put(*packPointer);
packPointer++;
}
if(!m_running)
m_running = m_samples.getData() > 300U;//75ms of audio
}
bool CFMUpSampler::getSample(q15_t& sample)
{
if(!m_running)
return false;
switch (m_upSampleIndex)
{
case 0: {
TSamplePairPack pairPack;
if(!m_samples.get(pairPack)) {
m_running = false;
return false;
}
m_pack = 0U;
m_packPointer = (uint8_t*)&m_pack;
m_packPointer[0U] = pairPack.byte0;
m_packPointer[1U] = pairPack.byte1;
m_packPointer[2U] = pairPack.byte2;
sample = q15_t(m_pack >> 12) - 2048;
break;
}
case 3:
sample = q15_t(m_pack & FM_UPSAMPLE_MASK) - 2048;
break;
default:
sample = 0;
break;
}
m_upSampleIndex++;
if(m_upSampleIndex >= 6U)
m_upSampleIndex = 0U;
return true;
}
uint16_t CFMUpSampler::getSpace() const
{
//return available space in bytes
return m_samples.getSpace() * sizeof(TSamplePairPack);
}
#endif
+54
View File
@@ -0,0 +1,54 @@
/*
* Copyright (C) 2020 by Jonathan Naylor G4KLX
* Copyright (C) 2020 by Geoffrey Merck F4FXL - KC3FRA
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "Config.h"
#if defined(MODE_FM)
#if !defined(FMUPSAMPLER_H)
#define FMUPSAMPLER_H
#include "RingBuffer.h"
#include "FMSamplePairPack.h"
class CFMUpSampler {
public:
CFMUpSampler();
void reset();
void addData(const uint8_t* data, uint16_t length);
bool getSample(q15_t& sample);
uint16_t getSpace() const;
private:
uint8_t m_upSampleIndex;
uint32_t m_pack;
uint8_t * m_packPointer;
CRingBuffer<TSamplePairPack> m_samples;
bool m_running;
};
#endif
#endif
-1
View File
@@ -1 +0,0 @@
#define GITVERSION "0000000"
+49 -16
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2015,2016,2017,2018 by Jonathan Naylor G4KLX * Copyright (C) 2015,2016,2017,2018,2020,2021,2025 by Jonathan Naylor G4KLX
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
@@ -23,14 +23,12 @@
#include "stm32f4xx.h" #include "stm32f4xx.h"
#elif defined(STM32F7XX) #elif defined(STM32F7XX)
#include "stm32f7xx.h" #include "stm32f7xx.h"
#elif defined(STM32F105xC)
#include "stm32f1xx.h"
#include "STM32Utils.h"
#else #else
#include <Arduino.h> #include <Arduino.h>
#undef PI //Undefine PI to get rid of annoying warning as it is also defined in arm_math.h.
#endif #endif
#if defined(__SAM3X8E__) || defined(STM32F105xC) #if defined(__SAM3X8E__)
#define ARM_MATH_CM3 #define ARM_MATH_CM3
#elif defined(STM32F7XX) #elif defined(STM32F7XX)
#define ARM_MATH_CM7 #define ARM_MATH_CM7
@@ -50,6 +48,7 @@ enum MMDVM_STATE {
STATE_P25 = 4, STATE_P25 = 4,
STATE_NXDN = 5, STATE_NXDN = 5,
STATE_POCSAG = 6, STATE_POCSAG = 6,
STATE_FM = 10,
// Dummy states start at 90 // Dummy states start at 90
STATE_NXDNCAL1K = 91, STATE_NXDNCAL1K = 91,
@@ -60,7 +59,15 @@ enum MMDVM_STATE {
STATE_RSSICAL = 96, STATE_RSSICAL = 96,
STATE_CWID = 97, STATE_CWID = 97,
STATE_DMRCAL = 98, STATE_DMRCAL = 98,
STATE_DSTARCAL = 99 STATE_DSTARCAL = 99,
STATE_INTCAL = 100,
STATE_POCSAGCAL = 101,
STATE_FMCAL10K = 102,
STATE_FMCAL12K = 103,
STATE_FMCAL15K = 104,
STATE_FMCAL20K = 105,
STATE_FMCAL25K = 106,
STATE_FMCAL30K = 107
}; };
#include "SerialPort.h" #include "SerialPort.h"
@@ -80,13 +87,16 @@ enum MMDVM_STATE {
#include "POCSAGTX.h" #include "POCSAGTX.h"
#include "CalDStarRX.h" #include "CalDStarRX.h"
#include "CalDStarTX.h" #include "CalDStarTX.h"
#include "CalFM.h"
#include "CalDMR.h" #include "CalDMR.h"
#include "CalP25.h" #include "CalP25.h"
#include "CalNXDN.h" #include "CalNXDN.h"
#include "CalPOCSAG.h"
#include "CalRSSI.h" #include "CalRSSI.h"
#include "CWIdTX.h" #include "CWIdTX.h"
#include "Debug.h" #include "Debug.h"
#include "IO.h" #include "IO.h"
#include "FM.h"
const uint8_t MARK_SLOT1 = 0x08U; const uint8_t MARK_SLOT1 = 0x08U;
const uint8_t MARK_SLOT2 = 0x04U; const uint8_t MARK_SLOT2 = 0x04U;
@@ -94,10 +104,10 @@ const uint8_t MARK_NONE = 0x00U;
const uint16_t RX_BLOCK_SIZE = 2U; const uint16_t RX_BLOCK_SIZE = 2U;
const uint16_t TX_RINGBUFFER_SIZE = 1000U; const uint16_t TX_RINGBUFFER_SIZE = 500U;
const uint16_t RX_RINGBUFFER_SIZE = 1200U; const uint16_t RX_RINGBUFFER_SIZE = 600U;
#if defined(STM32F105xC) || defined(__MK20DX256__) #if defined(__MK20DX256__)
const uint16_t TX_BUFFER_LEN = 2000U; const uint16_t TX_BUFFER_LEN = 2000U;
#else #else
const uint16_t TX_BUFFER_LEN = 4000U; const uint16_t TX_BUFFER_LEN = 4000U;
@@ -111,6 +121,7 @@ extern bool m_ysfEnable;
extern bool m_p25Enable; extern bool m_p25Enable;
extern bool m_nxdnEnable; extern bool m_nxdnEnable;
extern bool m_pocsagEnable; extern bool m_pocsagEnable;
extern bool m_fmEnable;
extern bool m_duplex; extern bool m_duplex;
@@ -120,9 +131,15 @@ extern bool m_dcd;
extern CSerialPort serial; extern CSerialPort serial;
extern CIO io; extern CIO io;
#if defined(MODE_DSTAR)
extern CDStarRX dstarRX; extern CDStarRX dstarRX;
extern CDStarTX dstarTX; extern CDStarTX dstarTX;
extern CCalDStarRX calDStarRX;
extern CCalDStarTX calDStarTX;
#endif
#if defined(MODE_DMR)
extern CDMRIdleRX dmrIdleRX; extern CDMRIdleRX dmrIdleRX;
extern CDMRRX dmrRX; extern CDMRRX dmrRX;
extern CDMRTX dmrTX; extern CDMRTX dmrTX;
@@ -130,23 +147,39 @@ extern CDMRTX dmrTX;
extern CDMRDMORX dmrDMORX; extern CDMRDMORX dmrDMORX;
extern CDMRDMOTX dmrDMOTX; extern CDMRDMOTX dmrDMOTX;
extern CCalDMR calDMR;
#endif
#if defined(MODE_YSF)
extern CYSFRX ysfRX; extern CYSFRX ysfRX;
extern CYSFTX ysfTX; extern CYSFTX ysfTX;
#endif
#if defined(MODE_P25)
extern CP25RX p25RX; extern CP25RX p25RX;
extern CP25TX p25TX; extern CP25TX p25TX;
extern CCalP25 calP25;
#endif
#if defined(MODE_NXDN)
extern CNXDNRX nxdnRX; extern CNXDNRX nxdnRX;
extern CNXDNTX nxdnTX; extern CNXDNTX nxdnTX;
extern CPOCSAGTX pocsagTX; extern CCalNXDN calNXDN;
#endif
extern CCalDStarRX calDStarRX; #if defined(MODE_POCSAG)
extern CCalDStarTX calDStarTX; extern CPOCSAGTX pocsagTX;
extern CCalDMR calDMR; extern CCalPOCSAG calPOCSAG;
extern CCalP25 calP25; #endif
extern CCalNXDN calNXDN;
extern CCalRSSI calRSSI; #if defined(MODE_FM)
extern CFM fm;
extern CCalFM calFM;
#endif
extern CCalRSSI calRSSI;
extern CCWIdTX cwIdTX; extern CCWIdTX cwIdTX;
+332 -232
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2015,2016,2017,2018 by Jonathan Naylor G4KLX * Copyright (C) 2015,2016,2017,2018,2020,2021,2023,2025,2026 by Jonathan Naylor G4KLX
* Copyright (C) 2015 by Jim Mclaughlin KI6ZUM * Copyright (C) 2015 by Jim Mclaughlin KI6ZUM
* Copyright (C) 2016 by Colin Durbridge G4EML * Copyright (C) 2016 by Colin Durbridge G4EML
* *
@@ -22,41 +22,51 @@
#include "Globals.h" #include "Globals.h"
#include "IO.h" #include "IO.h"
// Generated using [b, a] = butter(1, 0.0005) in MATLAB #if defined(USE_DCBLOCKER)
static q31_t DC_FILTER[] = {1685306, 0, 1685306, 0, 2144113034, 0}; // {b0, 0, b1, b2, -a1, -a2} // Generated using [b, a] = butter(1, 0.001) in MATLAB
static q31_t DC_FILTER[] = {3367972, 0, 3367972, 0, 2140747704, 0}; // {b0, 0, b1, b2, -a1, -a2}
const uint32_t DC_FILTER_STAGES = 1U; // One Biquad stage const uint32_t DC_FILTER_STAGES = 1U; // One Biquad stage
#endif
#if defined(MODE_DMR) || defined(MODE_YSF)
// Generated using rcosdesign(0.2, 8, 5, 'sqrt') in MATLAB
static q15_t RRC_0_2_FILTER[] = {401, 104, -340, -731, -847, -553, 112, 909, 1472, 1450, 683, -675, -2144, -3040, -2706, -770, 2667, 6995,
11237, 14331, 15464, 14331, 11237, 6995, 2667, -770, -2706, -3040, -2144, -675, 683, 1450, 1472, 909, 112,
-553, -847, -731, -340, 104, 401, 0};
const uint16_t RRC_0_2_FILTER_LEN = 42U;
#endif
#if defined(MODE_NXDN)
#if defined(USE_NXDN_BOXCAR)
// One symbol boxcar filter
static q15_t BOXCAR10_FILTER[] = {6000, 6000, 6000, 6000, 6000, 6000, 6000, 6000, 6000, 6000};
const uint16_t BOXCAR10_FILTER_LEN = 10U;
#else
// Generated using rcosdesign(0.2, 8, 10, 'sqrt') in MATLAB // Generated using rcosdesign(0.2, 8, 10, 'sqrt') in MATLAB
static q15_t RRC_0_2_FILTER[] = {284, 198, 73, -78, -240, -393, -517, -590, -599, -533, -391, -181, 79, 364, 643, 880, 1041, 1097, 1026, 819, static q15_t NXDN_0_2_FILTER[] = {284, 198, 73, -78, -240, -393, -517, -590, -599, -533, -391, -181, 79, 364, 643, 880, 1041, 1097, 1026, 819,
483, 39, -477, -1016, -1516, -1915, -2150, -2164, -1914, -1375, -545, 557, 1886, 3376, 4946, 6502, 7946, 9184, 483, 39, -477, -1016, -1516, -1915, -2150, -2164, -1914, -1375, -545, 557, 1886, 3376, 4946, 6502, 7946, 9184,
10134, 10731, 10935, 10731, 10134, 9184, 7946, 6502, 4946, 3376, 1886, 557, -545, -1375, -1914, -2164, -2150, 10134, 10731, 10935, 10731, 10134, 9184, 7946, 6502, 4946, 3376, 1886, 557, -545, -1375, -1914, -2164, -2150,
-1915, -1516, -1016, -477, 39, 483, 819, 1026, 1097, 1041, 880, 643, 364, 79, -181, -391, -533, -599, -590, -1915, -1516, -1016, -477, 39, 483, 819, 1026, 1097, 1041, 880, 643, 364, 79, -181, -391, -533, -599, -590,
-517, -393, -240, -78, 73, 198, 284, 0}; -517, -393, -240, -78, 73, 198, 284, 0};
const uint16_t RRC_0_2_FILTER_LEN = 82U; const uint16_t NXDN_0_2_FILTER_LEN = 82U;
// Generated using rcosdesign(0.2, 8, 20, 'sqrt') in MATLAB static q15_t NXDN_ISINC_FILTER[] = {790, -1085, -1073, -553, 747, 2341, 3156, 2152, -893, -4915, -7834, -7536, -3102, 4441, 12354, 17394, 17394,
static q15_t NXDN_0_2_FILTER[] = {201, 174, 140, 99, 52, 0, -55, -112, -170, -226, -278, -325, -365, -397, -417, -427, -424, -407, -377, -333, -277, -208, 12354, 4441, -3102, -7536, -7834, -4915, -893, 2152, 3156, 2341, 747, -553, -1073, -1085, 790};
-128, -40, 56, 156, 258, 358, 455, 544, 622, 687, 736, 766, 775, 762, 725, 664, 579, 471, 342, 193, 27, -151, -338, -528,
-718, -901, -1072, -1225, -1354, -1454, -1520, -1547, -1530, -1466, -1353, -1189, -972, -704, -385, -18, 394, 846, 1333,
1850, 2388, 2940, 3498, 4053, 4598, 5122, 5619, 6079, 6494, 6859, 7166, 7410, 7588, 7696, 7732, 7696, 7588, 7410, 7166,
6859, 6494, 6079, 5619, 5122, 4598, 4053, 3498, 2940, 2388, 1850, 1333, 846, 394, -18, -385, -704, -972, -1189, -1353,
-1466, -1530, -1547, -1520, -1454, -1354, -1225, -1072, -901, -718, -528, -338, -151, 27, 193, 342, 471, 579, 664, 725,
762, 775, 766, 736, 687, 622, 544, 455, 358, 258, 156, 56, -40, -128, -208, -277, -333, -377, -407, -424, -427, -417, -397,
-365, -325, -278, -226, -170, -112, -55, 0, 52, 99, 140, 174, 201, 0};
const uint16_t NXDN_0_2_FILTER_LEN = 162U;
static q15_t NXDN_ISINC_FILTER[] = {7616, -1333, -1856, -2611, -3399, -4006, -4230, -3918, -2988, -1458, 561, 2867, 5200, 7276, 8832, 9665,
9665, 8832, 7276, 5200, 2867, 561, -1458, -2988, -3918, -4230, -4006, -3399, -2611, -1856, -1333, 7616};
const uint16_t NXDN_ISINC_FILTER_LEN = 32U; const uint16_t NXDN_ISINC_FILTER_LEN = 32U;
#if !defined (DSTARBOXCAR)
// Generated using gaussfir(0.5, 4, 10) in MATLAB
static q15_t GAUSSIAN_0_5_FILTER[] = {1, 4, 15, 52, 151, 380, 832, 1579, 2599, 3710, 4594, 4933, 4594, 3710, 2599, 1579, 832, 380, 151, 52, 15, 4, 1, 0};
const uint16_t GAUSSIAN_0_5_FILTER_LEN = 24U;
#endif #endif
#endif
#if defined(MODE_DSTAR)
// Generated using gaussfir(0.5, 4, 5) in MATLAB
static q15_t GAUSSIAN_0_5_FILTER[] = {8, 104, 760, 3158, 7421, 9866, 7421, 3158, 760, 104, 8, 0};
const uint16_t GAUSSIAN_0_5_FILTER_LEN = 12U;
#endif
#if defined(MODE_P25)
// One symbol boxcar filter // One symbol boxcar filter
static q15_t BOXCAR_FILTER[] = {6000, 6000, 6000, 6000, 6000, 6000, 6000, 6000, 6000, 6000, 0, 0}; static q15_t BOXCAR5_FILTER[] = {12000, 12000, 12000, 12000, 12000, 0};
const uint16_t BOXCAR_FILTER_LEN = 12U; const uint16_t BOXCAR5_FILTER_LEN = 6U;
#endif
const uint16_t DC_OFFSET = 2048U; const uint16_t DC_OFFSET = 2048U;
@@ -65,22 +75,37 @@ m_started(false),
m_rxBuffer(RX_RINGBUFFER_SIZE), m_rxBuffer(RX_RINGBUFFER_SIZE),
m_txBuffer(TX_RINGBUFFER_SIZE), m_txBuffer(TX_RINGBUFFER_SIZE),
m_rssiBuffer(RX_RINGBUFFER_SIZE), m_rssiBuffer(RX_RINGBUFFER_SIZE),
#if defined(USE_DCBLOCKER)
m_dcFilter(), m_dcFilter(),
m_dcState(), m_dcState(),
m_rrcFilter(),
#if !defined (DSTARBOXCAR)
m_gaussianFilter(),
#endif #endif
m_boxcarFilter(), #if defined(MODE_DSTAR)
m_nxdnFilter(), m_gaussianFilter(),
m_nxdnISincFilter(),
m_rrcState(),
#if !defined (DSTARBOXCAR)
m_gaussianState(), m_gaussianState(),
#endif #endif
m_boxcarState(), #if defined(MODE_DMR)
m_rrc02Filter1(),
m_rrc02State1(),
#endif
#if defined(MODE_YSF)
m_rrc02Filter2(),
m_rrc02State2(),
#endif
#if defined(MODE_P25)
m_boxcar5Filter(),
m_boxcar5State(),
#endif
#if defined(MODE_NXDN)
#if defined(USE_NXDN_BOXCAR)
m_boxcar10Filter(),
m_boxcar10State(),
#else
m_nxdnFilter(),
m_nxdnISincFilter(),
m_nxdnState(), m_nxdnState(),
m_nxdnISincState(), m_nxdnISincState(),
#endif
#endif
m_pttInvert(false), m_pttInvert(false),
m_rxLevel(128 * 128), m_rxLevel(128 * 128),
m_cwIdTXLevel(128 * 128), m_cwIdTXLevel(128 * 128),
@@ -90,8 +115,10 @@ m_ysfTXLevel(128 * 128),
m_p25TXLevel(128 * 128), m_p25TXLevel(128 * 128),
m_nxdnTXLevel(128 * 128), m_nxdnTXLevel(128 * 128),
m_pocsagTXLevel(128 * 128), m_pocsagTXLevel(128 * 128),
m_fmTXLevel(128 * 128),
m_rxDCOffset(DC_OFFSET), m_rxDCOffset(DC_OFFSET),
m_txDCOffset(DC_OFFSET), m_txDCOffset(DC_OFFSET),
m_useCOSAsLockout(false),
m_ledCount(0U), m_ledCount(0U),
m_ledValue(true), m_ledValue(true),
m_detect(false), m_detect(false),
@@ -100,32 +127,52 @@ m_dacOverflow(0U),
m_watchdog(0U), m_watchdog(0U),
m_lockout(false) m_lockout(false)
{ {
::memset(m_rrcState, 0x00U, 140U * sizeof(q15_t)); #if defined(USE_DCBLOCKER)
#if !defined (DSTARBOXCAR) ::memset(m_dcState, 0x00U, 4U * sizeof(q31_t));
::memset(m_gaussianState, 0x00U, 80U * sizeof(q15_t));
#endif
::memset(m_boxcarState, 0x00U, 60U * sizeof(q15_t));
::memset(m_nxdnState, 0x00U, 220U * sizeof(q15_t));
::memset(m_nxdnISincState, 0x00U, 60U * sizeof(q15_t));
::memset(m_dcState, 0x00U, 4U * sizeof(q31_t));
m_dcFilter.numStages = DC_FILTER_STAGES; m_dcFilter.numStages = DC_FILTER_STAGES;
m_dcFilter.pState = m_dcState; m_dcFilter.pState = m_dcState;
m_dcFilter.pCoeffs = DC_FILTER; m_dcFilter.pCoeffs = DC_FILTER;
m_dcFilter.postShift = 0; m_dcFilter.postShift = 0;
#endif
m_rrcFilter.numTaps = RRC_0_2_FILTER_LEN; #if defined(MODE_DSTAR)
m_rrcFilter.pState = m_rrcState; ::memset(m_gaussianState, 0x00U, 40U * sizeof(q15_t));
m_rrcFilter.pCoeffs = RRC_0_2_FILTER;
#if !defined (DSTARBOXCAR)
m_gaussianFilter.numTaps = GAUSSIAN_0_5_FILTER_LEN; m_gaussianFilter.numTaps = GAUSSIAN_0_5_FILTER_LEN;
m_gaussianFilter.pState = m_gaussianState; m_gaussianFilter.pState = m_gaussianState;
m_gaussianFilter.pCoeffs = GAUSSIAN_0_5_FILTER; m_gaussianFilter.pCoeffs = GAUSSIAN_0_5_FILTER;
#endif #endif
m_boxcarFilter.numTaps = BOXCAR_FILTER_LEN;
m_boxcarFilter.pState = m_boxcarState; #if defined(MODE_DMR)
m_boxcarFilter.pCoeffs = BOXCAR_FILTER; ::memset(m_rrc02State1, 0x00U, 70U * sizeof(q15_t));
m_rrc02Filter1.numTaps = RRC_0_2_FILTER_LEN;
m_rrc02Filter1.pState = m_rrc02State1;
m_rrc02Filter1.pCoeffs = RRC_0_2_FILTER;
#endif
#if defined(MODE_YSF)
::memset(m_rrc02State2, 0x00U, 70U * sizeof(q15_t));
m_rrc02Filter2.numTaps = RRC_0_2_FILTER_LEN;
m_rrc02Filter2.pState = m_rrc02State2;
m_rrc02Filter2.pCoeffs = RRC_0_2_FILTER;
#endif
#if defined(MODE_P25)
::memset(m_boxcar5State, 0x00U, 30U * sizeof(q15_t));
m_boxcar5Filter.numTaps = BOXCAR5_FILTER_LEN;
m_boxcar5Filter.pState = m_boxcar5State;
m_boxcar5Filter.pCoeffs = BOXCAR5_FILTER;
#endif
#if defined(MODE_NXDN)
#if defined(USE_NXDN_BOXCAR)
::memset(m_boxcar10State, 0x00U, 40U * sizeof(q15_t));
m_boxcar10Filter.numTaps = BOXCAR10_FILTER_LEN;
m_boxcar10Filter.pState = m_boxcar10State;
m_boxcar10Filter.pCoeffs = BOXCAR10_FILTER;
#else
::memset(m_nxdnState, 0x00U, 110U * sizeof(q15_t));
::memset(m_nxdnISincState, 0x00U, 60U * sizeof(q15_t));
m_nxdnFilter.numTaps = NXDN_0_2_FILTER_LEN; m_nxdnFilter.numTaps = NXDN_0_2_FILTER_LEN;
m_nxdnFilter.pState = m_nxdnState; m_nxdnFilter.pState = m_nxdnState;
m_nxdnFilter.pCoeffs = NXDN_0_2_FILTER; m_nxdnFilter.pCoeffs = NXDN_0_2_FILTER;
@@ -133,6 +180,8 @@ m_lockout(false)
m_nxdnISincFilter.numTaps = NXDN_ISINC_FILTER_LEN; m_nxdnISincFilter.numTaps = NXDN_ISINC_FILTER_LEN;
m_nxdnISincFilter.pState = m_nxdnISincState; m_nxdnISincFilter.pState = m_nxdnISincState;
m_nxdnISincFilter.pCoeffs = NXDN_ISINC_FILTER; m_nxdnISincFilter.pCoeffs = NXDN_ISINC_FILTER;
#endif
#endif
initInt(); initInt();
@@ -143,130 +192,95 @@ void CIO::selfTest()
{ {
bool ledValue = false; bool ledValue = false;
for (uint8_t i = 0; i < 6; i++) { for (uint8_t i = 0U; i < 6U; i++) {
ledValue = !ledValue; ledValue = !ledValue;
// We exclude PTT to avoid trigger the transmitter // We exclude PTT to avoid trigger the transmitter
setLEDInt(ledValue); setLEDInt(ledValue);
setCOSInt(ledValue); setCOSInt(ledValue);
#if defined(MODE_PINS) #if defined(MODE_LEDS)
setDStarInt(ledValue); setDStarInt(ledValue);
setDMRInt(ledValue); setDMRInt(ledValue);
setYSFInt(ledValue); setYSFInt(ledValue);
setP25Int(ledValue); setP25Int(ledValue);
#if !defined(USE_ALTERNATE_NXDN_LEDS)
setNXDNInt(ledValue); setNXDNInt(ledValue);
#endif
#if !defined(USE_ALTERNATE_POCSAG_LEDS)
setPOCSAGInt(ledValue); setPOCSAGInt(ledValue);
#endif
#if !defined(USE_ALTERNATE_FM_LEDS)
setFMInt(ledValue);
#endif
#endif #endif
delayInt(250); delayInt(250);
} }
#if defined(MODE_PINS) #if defined(MODE_LEDS)
setDStarInt(true);
setDMRInt(false);
setYSFInt(false);
setP25Int(false);
setNXDNInt(false);
setPOCSAGInt(false);
delayInt(250);
setDStarInt(true);
setDMRInt(true);
setYSFInt(false);
setP25Int(false);
setNXDNInt(false);
setPOCSAGInt(false);
delayInt(250);
setDStarInt(true);
setDMRInt(true);
setYSFInt(true);
setP25Int(false);
setNXDNInt(false);
setPOCSAGInt(false);
delayInt(250);
setDStarInt(true);
setDMRInt(true);
setYSFInt(true);
setP25Int(true);
setNXDNInt(false);
setPOCSAGInt(false);
delayInt(250);
setDStarInt(true);
setDMRInt(true);
setYSFInt(true);
setP25Int(true);
setNXDNInt(true);
setPOCSAGInt(false);
delayInt(250);
setDStarInt(true);
setDMRInt(true);
setYSFInt(true);
setP25Int(true);
setNXDNInt(true);
setPOCSAGInt(true);
delayInt(250);
setDStarInt(true);
setDMRInt(true);
setYSFInt(true);
setP25Int(true);
setNXDNInt(true);
setPOCSAGInt(false);
delayInt(250);
setDStarInt(true);
setDMRInt(true);
setYSFInt(true);
setP25Int(true);
setNXDNInt(false);
setPOCSAGInt(false);
delayInt(250);
setDStarInt(true);
setDMRInt(true);
setYSFInt(true);
setP25Int(false);
setNXDNInt(false);
setPOCSAGInt(false);
delayInt(250);
setDStarInt(true);
setDMRInt(true);
setYSFInt(false);
setP25Int(false);
setNXDNInt(false);
setPOCSAGInt(false);
delayInt(250);
setDStarInt(true);
setDMRInt(false);
setYSFInt(false);
setP25Int(false);
setNXDNInt(false);
setPOCSAGInt(false);
delayInt(250);
setDStarInt(false); setDStarInt(false);
setDMRInt(false); setDMRInt(false);
setYSFInt(false); setYSFInt(false);
setP25Int(false); setP25Int(false);
#if !defined(USE_ALTERNATE_NXDN_LEDS)
setNXDNInt(false); setNXDNInt(false);
#endif
#if !defined(USE_ALTERNATE_POCSAG_LEDS)
setPOCSAGInt(false); setPOCSAGInt(false);
#endif #endif
#if !defined(USE_ALTERNATE_FM_LEDS)
setFMInt(false);
#endif
setDStarInt(true);
delayInt(250);
setDMRInt(true);
delayInt(250);
setYSFInt(true);
delayInt(250);
setP25Int(true);
#if !defined(USE_ALTERNATE_NXDN_LEDS)
delayInt(250);
setNXDNInt(true);
#endif
#if !defined(USE_ALTERNATE_POCSAG_LEDS)
delayInt(250);
setPOCSAGInt(true);
#endif
#if !defined(USE_ALTERNATE_FM_LEDS)
delayInt(250);
setFMInt(true);
delayInt(250);
setFMInt(false);
#endif
#if !defined(USE_ALTERNATE_POCSAG_LEDS)
delayInt(250);
setPOCSAGInt(false);
#endif
#if !defined(USE_ALTERNATE_NXDN_LEDS)
delayInt(250);
setNXDNInt(false);
#endif
delayInt(250);
setP25Int(false);
delayInt(250);
setYSFInt(false);
delayInt(250);
setDMRInt(false);
delayInt(250);
setDStarInt(false);
#endif
} }
void CIO::start() void CIO::start()
@@ -278,7 +292,7 @@ void CIO::start()
m_started = true; m_started = true;
setMode(); setMode(STATE_IDLE);
} }
void CIO::process() void CIO::process()
@@ -286,12 +300,13 @@ void CIO::process()
m_ledCount++; m_ledCount++;
if (m_started) { if (m_started) {
// Two seconds timeout // Two seconds timeout
if (m_watchdog >= 96000U) { if (m_watchdog >= 48000U) {
if (m_modemState == STATE_DSTAR || m_modemState == STATE_DMR || m_modemState == STATE_YSF || m_modemState == STATE_P25 || m_modemState == STATE_NXDN) { if (m_modemState == STATE_DSTAR || m_modemState == STATE_DMR || m_modemState == STATE_YSF || m_modemState == STATE_P25 || m_modemState == STATE_NXDN || m_modemState == STATE_POCSAG) {
#if defined(MODE_DMR)
if (m_modemState == STATE_DMR && m_tx) if (m_modemState == STATE_DMR && m_tx)
dmrTX.setStart(false); dmrTX.setStart(false);
m_modemState = STATE_IDLE; #endif
setMode(); setMode(STATE_IDLE);
} }
m_watchdog = 0U; m_watchdog = 0U;
@@ -300,14 +315,14 @@ void CIO::process()
#if defined(CONSTANT_SRV_LED) #if defined(CONSTANT_SRV_LED)
setLEDInt(true); setLEDInt(true);
#else #else
if (m_ledCount >= 48000U) { if (m_ledCount >= 24000U) {
m_ledCount = 0U; m_ledCount = 0U;
m_ledValue = !m_ledValue; m_ledValue = !m_ledValue;
setLEDInt(m_ledValue); setLEDInt(m_ledValue);
} }
#endif #endif
} else { } else {
if (m_ledCount >= 480000U) { if (m_ledCount >= 240000U) {
m_ledCount = 0U; m_ledCount = 0U;
m_ledValue = !m_ledValue; m_ledValue = !m_ledValue;
setLEDInt(m_ledValue); setLEDInt(m_ledValue);
@@ -315,14 +330,14 @@ void CIO::process()
return; return;
} }
#if defined(USE_COS_AS_LOCKOUT) if (m_useCOSAsLockout)
m_lockout = getCOSInt(); m_lockout = getCOSInt();
#endif
// Switch off the transmitter if needed // Switch off the transmitter if needed
if (m_txBuffer.getData() == 0U && m_tx) { if (m_txBuffer.getData() == 0U && m_tx) {
m_tx = false; m_tx = false;
setPTTInt(m_pttInvert ? true : false); setPTTInt(m_pttInvert ? true : false);
DEBUG1("TX OFF");
} }
if (m_rxBuffer.getData() >= RX_BLOCK_SIZE) { if (m_rxBuffer.getData() >= RX_BLOCK_SIZE) {
@@ -331,15 +346,16 @@ void CIO::process()
uint16_t rssi[RX_BLOCK_SIZE]; uint16_t rssi[RX_BLOCK_SIZE];
for (uint16_t i = 0U; i < RX_BLOCK_SIZE; i++) { for (uint16_t i = 0U; i < RX_BLOCK_SIZE; i++) {
uint16_t sample; TSample sample;
m_rxBuffer.get(sample, control[i]); m_rxBuffer.get(sample);
control[i] = sample.control;
m_rssiBuffer.get(rssi[i]); m_rssiBuffer.get(rssi[i]);
// Detect ADC overflow // Detect ADC overflow
if (m_detect && (sample == 0U || sample == 4095U)) if (m_detect && (sample.sample == 0U || sample.sample == 4095U))
m_adcOverflow++; m_adcOverflow++;
q15_t res1 = q15_t(sample) - m_rxDCOffset; q15_t res1 = q15_t(sample.sample) - m_rxDCOffset;
q31_t res2 = res1 * m_rxLevel; q31_t res2 = res1 * m_rxLevel;
samples[i] = q15_t(__SSAT((res2 >> 15), 16)); samples[i] = q15_t(__SSAT((res2 >> 15), 16));
} }
@@ -367,83 +383,107 @@ void CIO::process()
#endif #endif
if (m_modemState == STATE_IDLE) { if (m_modemState == STATE_IDLE) {
#if defined(MODE_DSTAR)
if (m_dstarEnable) { if (m_dstarEnable) {
q15_t GMSKVals[RX_BLOCK_SIZE]; q15_t GMSKVals[RX_BLOCK_SIZE];
#if defined(USE_DCBLOCKER) #if defined(USE_DCBLOCKER)
#if !defined (DSTARBOXCAR)
::arm_fir_fast_q15(&m_gaussianFilter, dcSamples, GMSKVals, RX_BLOCK_SIZE); ::arm_fir_fast_q15(&m_gaussianFilter, dcSamples, GMSKVals, RX_BLOCK_SIZE);
#else
::arm_fir_fast_q15(&m_boxcarFilter, dcSamples, GMSKVals, RX_BLOCK_SIZE);
#endif
#else #else
#if !defined (DSTARBOXCAR) ::arm_fir_fast_q15(&m_gaussianFilter, samples, GMSKVals, RX_BLOCK_SIZE);
::arm_fir_fast_q15(&m_gaussianFilter, samples, GMSKVals, RX_BLOCK_SIZE);
#else
::arm_fir_fast_q15(&m_boxcarFilter, samples, GMSKVals, RX_BLOCK_SIZE);
#endif
#endif #endif
dstarRX.samples(GMSKVals, rssi, RX_BLOCK_SIZE); dstarRX.samples(GMSKVals, rssi, RX_BLOCK_SIZE);
} }
#endif
#if defined(MODE_P25)
if (m_p25Enable) { if (m_p25Enable) {
q15_t P25Vals[RX_BLOCK_SIZE]; q15_t P25Vals[RX_BLOCK_SIZE];
#if defined(USE_DCBLOCKER) #if defined(USE_DCBLOCKER)
::arm_fir_fast_q15(&m_boxcarFilter, dcSamples, P25Vals, RX_BLOCK_SIZE); ::arm_fir_fast_q15(&m_boxcar5Filter, dcSamples, P25Vals, RX_BLOCK_SIZE);
#else #else
::arm_fir_fast_q15(&m_boxcarFilter, samples, P25Vals, RX_BLOCK_SIZE); ::arm_fir_fast_q15(&m_boxcar5Filter, samples, P25Vals, RX_BLOCK_SIZE);
#endif #endif
p25RX.samples(P25Vals, rssi, RX_BLOCK_SIZE); p25RX.samples(P25Vals, rssi, RX_BLOCK_SIZE);
} }
#endif
#if defined(MODE_NXDN)
if (m_nxdnEnable) { if (m_nxdnEnable) {
q15_t NXDNVals[RX_BLOCK_SIZE];
#if defined(USE_NXDN_BOXCAR)
#if defined(USE_DCBLOCKER)
::arm_fir_fast_q15(&m_boxcar10Filter, dcSamples, NXDNVals, RX_BLOCK_SIZE);
#else
::arm_fir_fast_q15(&m_boxcar10Filter, samples, NXDNVals, RX_BLOCK_SIZE);
#endif
#else
q15_t NXDNValsTmp[RX_BLOCK_SIZE]; q15_t NXDNValsTmp[RX_BLOCK_SIZE];
#if defined(USE_DCBLOCKER) #if defined(USE_DCBLOCKER)
::arm_fir_fast_q15(&m_nxdnFilter, dcSamples, NXDNValsTmp, RX_BLOCK_SIZE); ::arm_fir_fast_q15(&m_nxdnFilter, dcSamples, NXDNValsTmp, RX_BLOCK_SIZE);
#else #else
::arm_fir_fast_q15(&m_nxdnFilter, samples, NXDNValsTmp, RX_BLOCK_SIZE); ::arm_fir_fast_q15(&m_nxdnFilter, samples, NXDNValsTmp, RX_BLOCK_SIZE);
#endif #endif
q15_t NXDNVals[RX_BLOCK_SIZE];
::arm_fir_fast_q15(&m_nxdnISincFilter, NXDNValsTmp, NXDNVals, RX_BLOCK_SIZE); ::arm_fir_fast_q15(&m_nxdnISincFilter, NXDNValsTmp, NXDNVals, RX_BLOCK_SIZE);
#endif
nxdnRX.samples(NXDNVals, rssi, RX_BLOCK_SIZE); nxdnRX.samples(NXDNVals, rssi, RX_BLOCK_SIZE);
} }
#endif
if (m_dmrEnable || m_ysfEnable) { #if defined(MODE_DMR)
q15_t RRCVals[RX_BLOCK_SIZE]; if (m_dmrEnable) {
::arm_fir_fast_q15(&m_rrcFilter, samples, RRCVals, RX_BLOCK_SIZE); q15_t DMRVals[RX_BLOCK_SIZE];
::arm_fir_fast_q15(&m_rrc02Filter1, samples, DMRVals, RX_BLOCK_SIZE);
if (m_ysfEnable) if (m_duplex)
ysfRX.samples(RRCVals, rssi, RX_BLOCK_SIZE); dmrIdleRX.samples(DMRVals, RX_BLOCK_SIZE);
else
if (m_dmrEnable) { dmrDMORX.samples(DMRVals, rssi, RX_BLOCK_SIZE);
if (m_duplex)
dmrIdleRX.samples(RRCVals, RX_BLOCK_SIZE);
else
dmrDMORX.samples(RRCVals, rssi, RX_BLOCK_SIZE);
}
} }
} else if (m_modemState == STATE_DSTAR) { #endif
#if defined(MODE_YSF)
if (m_ysfEnable) {
q15_t YSFVals[RX_BLOCK_SIZE];
#if defined(USE_DCBLOCKER)
::arm_fir_fast_q15(&m_rrc02Filter2, dcSamples, YSFVals, RX_BLOCK_SIZE);
#else
::arm_fir_fast_q15(&m_rrc02Filter2, samples, YSFVals, RX_BLOCK_SIZE);
#endif
ysfRX.samples(YSFVals, rssi, RX_BLOCK_SIZE);
}
#endif
#if defined(MODE_FM)
if (m_fmEnable) {
bool cos = getCOSInt();
#if defined(USE_DCBLOCKER)
fm.samples(cos, dcSamples, rssi, RX_BLOCK_SIZE);
#else
fm.samples(cos, samples, rssi, RX_BLOCK_SIZE);
#endif
}
#endif
}
#if defined(MODE_DSTAR)
else if (m_modemState == STATE_DSTAR) {
if (m_dstarEnable) { if (m_dstarEnable) {
q15_t GMSKVals[RX_BLOCK_SIZE]; q15_t GMSKVals[RX_BLOCK_SIZE];
#if defined(USE_DCBLOCKER) #if defined(USE_DCBLOCKER)
#if !defined (DSTARBOXCAR)
::arm_fir_fast_q15(&m_gaussianFilter, dcSamples, GMSKVals, RX_BLOCK_SIZE); ::arm_fir_fast_q15(&m_gaussianFilter, dcSamples, GMSKVals, RX_BLOCK_SIZE);
#else
::arm_fir_fast_q15(&m_boxcarFilter, dcSamples, GMSKVals, RX_BLOCK_SIZE);
#endif
#else #else
#if !defined (DSTARBOXCAR) ::arm_fir_fast_q15(&m_gaussianFilter, samples, GMSKVals, RX_BLOCK_SIZE);
::arm_fir_fast_q15(&m_gaussianFilter, samples, GMSKVals, RX_BLOCK_SIZE);
#else
::arm_fir_fast_q15(&m_boxcarFilter, samples, GMSKVals, RX_BLOCK_SIZE);
#endif
#endif #endif
dstarRX.samples(GMSKVals, rssi, RX_BLOCK_SIZE); dstarRX.samples(GMSKVals, rssi, RX_BLOCK_SIZE);
} }
} else if (m_modemState == STATE_DMR) { }
#endif
#if defined(MODE_DMR)
else if (m_modemState == STATE_DMR) {
if (m_dmrEnable) { if (m_dmrEnable) {
q15_t DMRVals[RX_BLOCK_SIZE]; q15_t DMRVals[RX_BLOCK_SIZE];
::arm_fir_fast_q15(&m_rrcFilter, samples, DMRVals, RX_BLOCK_SIZE); ::arm_fir_fast_q15(&m_rrc02Filter1, samples, DMRVals, RX_BLOCK_SIZE);
if (m_duplex) { if (m_duplex) {
// If the transmitter isn't on, use the DMR idle RX to detect the wakeup CSBKs // If the transmitter isn't on, use the DMR idle RX to detect the wakeup CSBKs
@@ -455,48 +495,82 @@ void CIO::process()
dmrDMORX.samples(DMRVals, rssi, RX_BLOCK_SIZE); dmrDMORX.samples(DMRVals, rssi, RX_BLOCK_SIZE);
} }
} }
} else if (m_modemState == STATE_YSF) { }
#endif
#if defined(MODE_YSF)
else if (m_modemState == STATE_YSF) {
if (m_ysfEnable) { if (m_ysfEnable) {
q15_t YSFVals[RX_BLOCK_SIZE]; q15_t YSFVals[RX_BLOCK_SIZE];
#if defined(USE_DCBLOCKER) #if defined(USE_DCBLOCKER)
::arm_fir_fast_q15(&m_rrcFilter, dcSamples, YSFVals, RX_BLOCK_SIZE); ::arm_fir_fast_q15(&m_rrc02Filter2, dcSamples, YSFVals, RX_BLOCK_SIZE);
#else #else
::arm_fir_fast_q15(&m_rrcFilter, samples, YSFVals, RX_BLOCK_SIZE); ::arm_fir_fast_q15(&m_rrc02Filter2, samples, YSFVals, RX_BLOCK_SIZE);
#endif #endif
ysfRX.samples(YSFVals, rssi, RX_BLOCK_SIZE); ysfRX.samples(YSFVals, rssi, RX_BLOCK_SIZE);
} }
} else if (m_modemState == STATE_P25) { }
#endif
#if defined(MODE_P25)
else if (m_modemState == STATE_P25) {
if (m_p25Enable) { if (m_p25Enable) {
q15_t P25Vals[RX_BLOCK_SIZE]; q15_t P25Vals[RX_BLOCK_SIZE];
#if defined(USE_DCBLOCKER) #if defined(USE_DCBLOCKER)
::arm_fir_fast_q15(&m_boxcarFilter, dcSamples, P25Vals, RX_BLOCK_SIZE); ::arm_fir_fast_q15(&m_boxcar5Filter, dcSamples, P25Vals, RX_BLOCK_SIZE);
#else #else
::arm_fir_fast_q15(&m_boxcarFilter, samples, P25Vals, RX_BLOCK_SIZE); ::arm_fir_fast_q15(&m_boxcar5Filter, samples, P25Vals, RX_BLOCK_SIZE);
#endif #endif
p25RX.samples(P25Vals, rssi, RX_BLOCK_SIZE); p25RX.samples(P25Vals, rssi, RX_BLOCK_SIZE);
} }
} else if (m_modemState == STATE_NXDN) { }
#endif
#if defined(MODE_NXDN)
else if (m_modemState == STATE_NXDN) {
if (m_nxdnEnable) { if (m_nxdnEnable) {
q15_t NXDNVals[RX_BLOCK_SIZE];
#if defined(USE_NXDN_BOXCAR)
#if defined(USE_DCBLOCKER)
::arm_fir_fast_q15(&m_boxcar10Filter, dcSamples, NXDNVals, RX_BLOCK_SIZE);
#else
::arm_fir_fast_q15(&m_boxcar10Filter, samples, NXDNVals, RX_BLOCK_SIZE);
#endif
#else
q15_t NXDNValsTmp[RX_BLOCK_SIZE]; q15_t NXDNValsTmp[RX_BLOCK_SIZE];
#if defined(USE_DCBLOCKER) #if defined(USE_DCBLOCKER)
::arm_fir_fast_q15(&m_nxdnFilter, dcSamples, NXDNValsTmp, RX_BLOCK_SIZE); ::arm_fir_fast_q15(&m_nxdnFilter, dcSamples, NXDNValsTmp, RX_BLOCK_SIZE);
#else #else
::arm_fir_fast_q15(&m_nxdnFilter, samples, NXDNValsTmp, RX_BLOCK_SIZE); ::arm_fir_fast_q15(&m_nxdnFilter, samples, NXDNValsTmp, RX_BLOCK_SIZE);
#endif #endif
q15_t NXDNVals[RX_BLOCK_SIZE];
::arm_fir_fast_q15(&m_nxdnISincFilter, NXDNValsTmp, NXDNVals, RX_BLOCK_SIZE); ::arm_fir_fast_q15(&m_nxdnISincFilter, NXDNValsTmp, NXDNVals, RX_BLOCK_SIZE);
#endif
nxdnRX.samples(NXDNVals, rssi, RX_BLOCK_SIZE); nxdnRX.samples(NXDNVals, rssi, RX_BLOCK_SIZE);
} }
} else if (m_modemState == STATE_DSTARCAL) { }
q15_t GMSKVals[RX_BLOCK_SIZE];
#if !defined (DSTARBOXCAR)
::arm_fir_fast_q15(&m_gaussianFilter, samples, GMSKVals, RX_BLOCK_SIZE);
#else
::arm_fir_fast_q15(&m_boxcarFilter, samples, GMSKVals, RX_BLOCK_SIZE);
#endif #endif
#if defined(MODE_FM)
else if (m_modemState == STATE_FM) {
bool cos = getCOSInt();
#if defined(USE_DCBLOCKER)
fm.samples(cos, dcSamples, rssi, RX_BLOCK_SIZE);
#else
fm.samples(cos, samples, rssi, RX_BLOCK_SIZE);
#endif
}
#endif
#if defined(MODE_DSTAR)
else if (m_modemState == STATE_DSTARCAL) {
q15_t GMSKVals[RX_BLOCK_SIZE];
::arm_fir_fast_q15(&m_gaussianFilter, samples, GMSKVals, RX_BLOCK_SIZE);
calDStarRX.samples(GMSKVals, RX_BLOCK_SIZE); calDStarRX.samples(GMSKVals, RX_BLOCK_SIZE);
} else if (m_modemState == STATE_RSSICAL) { }
#endif
else if (m_modemState == STATE_RSSICAL) {
calRSSI.samples(rssi, RX_BLOCK_SIZE); calRSSI.samples(rssi, RX_BLOCK_SIZE);
} }
} }
@@ -514,6 +588,7 @@ void CIO::write(MMDVM_STATE mode, q15_t* samples, uint16_t length, const uint8_t
if (!m_tx) { if (!m_tx) {
m_tx = true; m_tx = true;
setPTTInt(m_pttInvert ? false : true); setPTTInt(m_pttInvert ? false : true);
DEBUG1("TX ON");
} }
q15_t txLevel = 0; q15_t txLevel = 0;
@@ -536,6 +611,9 @@ void CIO::write(MMDVM_STATE mode, q15_t* samples, uint16_t length, const uint8_t
case STATE_POCSAG: case STATE_POCSAG:
txLevel = m_pocsagTXLevel; txLevel = m_pocsagTXLevel;
break; break;
case STATE_FM:
txLevel = m_fmTXLevel;
break;
default: default:
txLevel = m_cwIdTXLevel; txLevel = m_cwIdTXLevel;
break; break;
@@ -551,9 +629,9 @@ void CIO::write(MMDVM_STATE mode, q15_t* samples, uint16_t length, const uint8_t
m_dacOverflow++; m_dacOverflow++;
if (control == NULL) if (control == NULL)
m_txBuffer.put(res3, MARK_NONE); m_txBuffer.put({res3, MARK_NONE});
else else
m_txBuffer.put(res3, control[i]); m_txBuffer.put({res3, control[i]});
} }
} }
@@ -575,19 +653,39 @@ void CIO::setADCDetection(bool detect)
m_detect = detect; m_detect = detect;
} }
void CIO::setMode() void CIO::setMode(MMDVM_STATE state)
{ {
#if defined(MODE_PINS) if (state == m_modemState)
setDStarInt(m_modemState == STATE_DSTAR); return;
setDMRInt(m_modemState == STATE_DMR);
setYSFInt(m_modemState == STATE_YSF); #if defined(MODE_LEDS)
setP25Int(m_modemState == STATE_P25); switch (m_modemState) {
setNXDNInt(m_modemState == STATE_NXDN); case STATE_DSTAR: setDStarInt(false); break;
setPOCSAGInt(m_modemState == STATE_POCSAG); case STATE_DMR: setDMRInt(false); break;
case STATE_YSF: setYSFInt(false); break;
case STATE_P25: setP25Int(false); break;
case STATE_NXDN: setNXDNInt(false); break;
case STATE_POCSAG: setPOCSAGInt(false); break;
case STATE_FM: setFMInt(false); break;
default: break;
}
switch (state) {
case STATE_DSTAR: setDStarInt(true); break;
case STATE_DMR: setDMRInt(true); break;
case STATE_YSF: setYSFInt(true); break;
case STATE_P25: setP25Int(true); break;
case STATE_NXDN: setNXDNInt(true); break;
case STATE_POCSAG: setPOCSAGInt(true); break;
case STATE_FM: setFMInt(true); break;
default: break;
}
#endif #endif
m_modemState = state;
} }
void CIO::setParameters(bool rxInvert, bool txInvert, bool pttInvert, uint8_t rxLevel, uint8_t cwIdTXLevel, uint8_t dstarTXLevel, uint8_t dmrTXLevel, uint8_t ysfTXLevel, uint8_t p25TXLevel, uint8_t nxdnTXLevel, uint8_t pocsagTXLevel, int16_t txDCOffset, int16_t rxDCOffset) void CIO::setParameters(bool rxInvert, bool txInvert, bool pttInvert, uint8_t rxLevel, uint8_t cwIdTXLevel, uint8_t dstarTXLevel, uint8_t dmrTXLevel, uint8_t ysfTXLevel, uint8_t p25TXLevel, uint8_t nxdnTXLevel, uint8_t pocsagTXLevel, uint8_t fmTXLevel, int16_t txDCOffset, int16_t rxDCOffset, bool useCOSAsLockout)
{ {
m_pttInvert = pttInvert; m_pttInvert = pttInvert;
@@ -599,9 +697,12 @@ void CIO::setParameters(bool rxInvert, bool txInvert, bool pttInvert, uint8_t rx
m_p25TXLevel = q15_t(p25TXLevel * 128); m_p25TXLevel = q15_t(p25TXLevel * 128);
m_nxdnTXLevel = q15_t(nxdnTXLevel * 128); m_nxdnTXLevel = q15_t(nxdnTXLevel * 128);
m_pocsagTXLevel = q15_t(pocsagTXLevel * 128); m_pocsagTXLevel = q15_t(pocsagTXLevel * 128);
m_fmTXLevel = q15_t(fmTXLevel * 128);
m_rxDCOffset = DC_OFFSET + rxDCOffset; m_rxDCOffset = DC_OFFSET + rxDCOffset;
m_txDCOffset = DC_OFFSET + txDCOffset; m_txDCOffset = DC_OFFSET + txDCOffset;
m_useCOSAsLockout = useCOSAsLockout;
if (rxInvert) if (rxInvert)
m_rxLevel = -m_rxLevel; m_rxLevel = -m_rxLevel;
@@ -649,4 +750,3 @@ bool CIO::hasLockout() const
{ {
return m_lockout; return m_lockout;
} }
+51 -20
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2015,2016,2017,2018 by Jonathan Naylor G4KLX * Copyright (C) 2015,2016,2017,2018,2020,2021,2025 by Jonathan Naylor G4KLX
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
@@ -21,8 +21,12 @@
#include "Globals.h" #include "Globals.h"
#include "SampleRB.h" #include "RingBuffer.h"
#include "RSSIRB.h"
struct TSample {
volatile uint16_t sample;
volatile uint8_t control;
};
class CIO { class CIO {
public: public:
@@ -38,11 +42,11 @@ public:
void setDecode(bool dcd); void setDecode(bool dcd);
void setADCDetection(bool detect); void setADCDetection(bool detect);
void setMode(); void setMode(MMDVM_STATE state);
void interrupt(); void interrupt();
void setParameters(bool rxInvert, bool txInvert, bool pttInvert, uint8_t rxLevel, uint8_t cwIdTXLevel, uint8_t dstarTXLevel, uint8_t dmrTXLevel, uint8_t ysfTXLevel, uint8_t p25TXLevel, uint8_t nxdnTXLevel, uint8_t pocsagTXLevel, int16_t txDCOffset, int16_t rxDCOffset); void setParameters(bool rxInvert, bool txInvert, bool pttInvert, uint8_t rxLevel, uint8_t cwIdTXLevel, uint8_t dstarTXLevel, uint8_t dmrTXLevel, uint8_t ysfTXLevel, uint8_t p25TXLevel, uint8_t nxdnTXLevel, uint8_t pocsagTXLevel, uint8_t fmTXLevel, int16_t txDCOffset, int16_t rxDCOffset, bool useCOSAsLockout);
void getOverflow(bool& adcOverflow, bool& dacOverflow); void getOverflow(bool& adcOverflow, bool& dacOverflow);
@@ -54,32 +58,55 @@ public:
void resetWatchdog(); void resetWatchdog();
uint32_t getWatchdog(); uint32_t getWatchdog();
uint8_t getCPU() const;
void getUDID(uint8_t* buffer);
void selfTest(); void selfTest();
private: private:
bool m_started; bool m_started;
CSampleRB m_rxBuffer; CRingBuffer<TSample> m_rxBuffer;
CSampleRB m_txBuffer; CRingBuffer<TSample> m_txBuffer;
CRSSIRB m_rssiBuffer; CRingBuffer<uint16_t> m_rssiBuffer;
#if defined(USE_DCBLOCKER)
arm_biquad_casd_df1_inst_q31 m_dcFilter; arm_biquad_casd_df1_inst_q31 m_dcFilter;
q31_t m_dcState[4]; q31_t m_dcState[4];
arm_fir_instance_q15 m_rrcFilter;
#if !defined (DSTARBOXCAR)
arm_fir_instance_q15 m_gaussianFilter;
#endif #endif
arm_fir_instance_q15 m_boxcarFilter;
#if defined(MODE_DSTAR)
arm_fir_instance_q15 m_gaussianFilter;
q15_t m_gaussianState[40U]; // NoTaps + BlockSize - 1, 12 + 20 - 1 plus some spare
#endif
#if defined(MODE_DMR)
arm_fir_instance_q15 m_rrc02Filter1;
q15_t m_rrc02State1[70U]; // NoTaps + BlockSize - 1, 42 + 20 - 1 plus some spare
#endif
#if defined(MODE_YSF)
arm_fir_instance_q15 m_rrc02Filter2;
q15_t m_rrc02State2[70U]; // NoTaps + BlockSize - 1, 42 + 20 - 1 plus some spare
#endif
#if defined(MODE_P25)
arm_fir_instance_q15 m_boxcar5Filter;
q15_t m_boxcar5State[30U]; // NoTaps + BlockSize - 1, 6 + 20 - 1 plus some spare
#endif
#if defined(MODE_NXDN)
#if defined(USE_NXDN_BOXCAR)
arm_fir_instance_q15 m_boxcar10Filter;
q15_t m_boxcar10State[40U]; // NoTaps + BlockSize - 1, 10 + 20 - 1 plus some spare
#else
arm_fir_instance_q15 m_nxdnFilter; arm_fir_instance_q15 m_nxdnFilter;
arm_fir_instance_q15 m_nxdnISincFilter; arm_fir_instance_q15 m_nxdnISincFilter;
q15_t m_rrcState[140U]; // NoTaps + BlockSize - 1, 82 + 20 - 1 plus some spare q15_t m_nxdnState[110U]; // NoTaps + BlockSize - 1, 82 + 20 - 1 plus some spare
#if !defined (DSTARBOXCAR)
q15_t m_gaussianState[80U]; // NoTaps + BlockSize - 1, 24 + 20 - 1 plus some spare
#endif
q15_t m_boxcarState[60U]; // NoTaps + BlockSize - 1, 12 + 20 - 1 plus some spare
q15_t m_nxdnState[220U]; // NoTaps + BlockSize - 1, 162 + 20 - 1 plus some spare
q15_t m_nxdnISincState[60U]; // NoTaps + BlockSize - 1, 32 + 20 - 1 plus some spare q15_t m_nxdnISincState[60U]; // NoTaps + BlockSize - 1, 32 + 20 - 1 plus some spare
#endif
#endif
bool m_pttInvert; bool m_pttInvert;
q15_t m_rxLevel; q15_t m_rxLevel;
@@ -90,10 +117,13 @@ private:
q15_t m_p25TXLevel; q15_t m_p25TXLevel;
q15_t m_nxdnTXLevel; q15_t m_nxdnTXLevel;
q15_t m_pocsagTXLevel; q15_t m_pocsagTXLevel;
q15_t m_fmTXLevel;
uint16_t m_rxDCOffset; uint16_t m_rxDCOffset;
uint16_t m_txDCOffset; uint16_t m_txDCOffset;
bool m_useCOSAsLockout;
uint32_t m_ledCount; uint32_t m_ledCount;
bool m_ledValue; bool m_ledValue;
@@ -122,6 +152,7 @@ private:
void setP25Int(bool on); void setP25Int(bool on);
void setNXDNInt(bool on); void setNXDNInt(bool on);
void setPOCSAGInt(bool on); void setPOCSAGInt(bool on);
void setFMInt(bool on);
void delayInt(unsigned int dly); void delayInt(unsigned int dly);
}; };
+54 -11
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2015,2016,2017,2018 by Jonathan Naylor G4KLX * Copyright (C) 2015,2016,2017,2018,2020,2025 by Jonathan Naylor G4KLX
* Copyright (C) 2015 by Jim Mclaughlin KI6ZUM * Copyright (C) 2015 by Jim Mclaughlin KI6ZUM
* Copyright (C) 2016 by Colin Durbridge G4EML * Copyright (C) 2016 by Colin Durbridge G4EML
* *
@@ -35,6 +35,7 @@
#define PIN_P25 19 #define PIN_P25 19
#define PIN_NXDN 20 #define PIN_NXDN 20
#define PIN_POCSAG 4 #define PIN_POCSAG 4
#define PIN_FM 5
#define ADC_CHER_Chan (1<<7) // ADC on Due pin A0 - Due AD7 - (1 << 7) #define ADC_CHER_Chan (1<<7) // ADC on Due pin A0 - Due AD7 - (1 << 7)
#define ADC_ISR_EOC_Chan ADC_ISR_EOC7 #define ADC_ISR_EOC_Chan ADC_ISR_EOC7
#define ADC_CDR_Chan 7 #define ADC_CDR_Chan 7
@@ -50,6 +51,7 @@
#define PIN_P25 6 #define PIN_P25 6
#define PIN_NXDN 5 #define PIN_NXDN 5
#define PIN_POCSAG 4 #define PIN_POCSAG 4
#define PIN_FM 3
#define ADC_CHER_Chan (1<<13) // ADC on Due pin A11 - Due AD13 - (1 << 13) #define ADC_CHER_Chan (1<<13) // ADC on Due pin A11 - Due AD13 - (1 << 13)
#define ADC_ISR_EOC_Chan ADC_ISR_EOC13 #define ADC_ISR_EOC_Chan ADC_ISR_EOC13
#define ADC_CDR_Chan 13 #define ADC_CDR_Chan 13
@@ -67,6 +69,7 @@
#define PIN_P25 6 #define PIN_P25 6
#define PIN_NXDN 5 #define PIN_NXDN 5
#define PIN_POCSAG 4 #define PIN_POCSAG 4
#define PIN_FM 3
#define ADC_CHER_Chan (1<<7) // ADC on Due pin A0 - Due AD7 - (1 << 7) #define ADC_CHER_Chan (1<<7) // ADC on Due pin A0 - Due AD7 - (1 << 7)
#define ADC_ISR_EOC_Chan ADC_ISR_EOC7 #define ADC_ISR_EOC_Chan ADC_ISR_EOC7
#define ADC_CDR_Chan 7 #define ADC_CDR_Chan 7
@@ -107,6 +110,9 @@ void CIO::initInt()
#if !defined(USE_ALTERNATE_POCSAG_LEDS) #if !defined(USE_ALTERNATE_POCSAG_LEDS)
pinMode(PIN_POCSAG, OUTPUT); pinMode(PIN_POCSAG, OUTPUT);
#endif #endif
#if !defined(USE_ALTERNATE_FM_LEDS)
pinMode(PIN_FM, OUTPUT);
#endif
#endif #endif
} }
@@ -152,11 +158,11 @@ void CIO::startInt()
TC_CMR_ACPA_CLEAR | TC_CMR_ACPC_CLEAR | TC_CMR_ACPA_CLEAR | TC_CMR_ACPC_CLEAR |
TC_CMR_BCPB_CLEAR | TC_CMR_BCPC_CLEAR; TC_CMR_BCPB_CLEAR | TC_CMR_BCPC_CLEAR;
#if defined(EXTERNAL_OSC) #if defined(EXTERNAL_OSC)
t->TC_RC = EXTERNAL_OSC / 48000; // Counter resets on RC, so sets period in terms of the external clock t->TC_RC = EXTERNAL_OSC / 24000; // Counter resets on RC, so sets period in terms of the external clock
t->TC_RA = EXTERNAL_OSC / 96000; // Roughly square wave t->TC_RA = EXTERNAL_OSC / 48000; // Roughly square wave
#else #else
t->TC_RC = 875; // Counter resets on RC, so sets period in terms of 42MHz internal clock t->TC_RC = 1750; // Counter resets on RC, so sets period in terms of 42MHz internal clock
t->TC_RA = 438; // Roughly square wave t->TC_RA = 880; // Roughly square wave
#endif #endif
t->TC_CMR = (t->TC_CMR & 0xFFF0FFFF) | TC_CMR_ACPA_CLEAR | TC_CMR_ACPC_SET; // Set clear and set from RA and RC compares t->TC_CMR = (t->TC_CMR & 0xFFF0FFFF) | TC_CMR_ACPA_CLEAR | TC_CMR_ACPC_SET; // Set clear and set from RA and RC compares
t->TC_CCR = TC_CCR_CLKEN | TC_CCR_SWTRG; // re-enable local clocking and switch to hardware trigger source. t->TC_CCR = TC_CCR_CLKEN | TC_CCR_SWTRG; // re-enable local clocking and switch to hardware trigger source.
@@ -179,14 +185,13 @@ void CIO::startInt()
void CIO::interrupt() void CIO::interrupt()
{ {
if ((ADC->ADC_ISR & ADC_ISR_EOC_Chan) == ADC_ISR_EOC_Chan) { // Ensure there was an End-of-Conversion and we read the ISR reg if ((ADC->ADC_ISR & ADC_ISR_EOC_Chan) == ADC_ISR_EOC_Chan) { // Ensure there was an End-of-Conversion and we read the ISR reg
uint8_t control = MARK_NONE; TSample sample = {DC_OFFSET, MARK_NONE};
uint16_t sample = DC_OFFSET;
m_txBuffer.get(sample, control); m_txBuffer.get(sample);
DACC->DACC_CDR = sample; DACC->DACC_CDR = sample.sample;
sample = ADC->ADC_CDR[ADC_CDR_Chan]; sample.sample = ADC->ADC_CDR[ADC_CDR_Chan];
m_rxBuffer.put(sample, control); m_rxBuffer.put(sample);
#if defined(SEND_RSSI_DATA) #if defined(SEND_RSSI_DATA)
m_rssiBuffer.put(ADC->ADC_CDR[RSSI_CDR_Chan]); m_rssiBuffer.put(ADC->ADC_CDR[RSSI_CDR_Chan]);
@@ -258,10 +263,48 @@ void CIO::setPOCSAGInt(bool on)
#endif #endif
} }
void CIO::setFMInt(bool on)
{
#if defined(USE_ALTERNATE_FM_LEDS)
digitalWrite(PIN_DSTAR, on ? HIGH : LOW);
digitalWrite(PIN_YSF, on ? HIGH : LOW);
#else
digitalWrite(PIN_FM, on ? HIGH : LOW);
#endif
}
void CIO::delayInt(unsigned int dly) void CIO::delayInt(unsigned int dly)
{ {
delay(dly); delay(dly);
} }
uint8_t CIO::getCPU() const
{
return 0U;
}
// Code taken from https://github.com/emagii/at91sam3s/blob/master/examples/eefc_uniqueid/main.c
void CIO::getUDID(uint8_t* buffer)
{
uint32_t status;
EFC1->EEFC_FCR = (0x5A << 24) | EFC_FCMD_STUI;
do {
status = EFC1->EEFC_FSR;
} while ( (status & EEFC_FSR_FRDY) == EEFC_FSR_FRDY );
for (uint8_t i = 0; i < 16; i+=4) {
buffer[i + 0] = *(uint32_t *)(IFLASH1_ADDR + i) >> 24;
buffer[i + 1] = *(uint32_t *)(IFLASH1_ADDR + i) >> 16;
buffer[i + 2] = *(uint32_t *)(IFLASH1_ADDR + i) >> 8;
buffer[i + 3] = *(uint32_t *)(IFLASH1_ADDR + i) >> 0;
}
EFC1->EEFC_FCR = (0x5A << 24) | EFC_FCMD_SPUI;
do {
status = EFC1->EEFC_FSR;
} while ( (status & EEFC_FSR_FRDY) != EEFC_FSR_FRDY );
}
#endif #endif
+79
View File
@@ -0,0 +1,79 @@
/*
* Copyright (C) 2019,2020 by BG5HHP
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef _IO_PINS_H
#define _IO_PINS_H
#if !defined(CONFIG_H)
#error "Requires Config.h to be included first!"
#endif
#if defined(STM32F4_RPT_HAT_TGO)
#include "pins/pins_f4_rpt_tgo.h"
#elif defined(STM32F4_DISCOVERY)
#include "pins/pins_f4_discovery.h"
#elif defined(STM32F4_PI)
#include "pins/pins_f4_pi.h"
#elif defined(STM32F722_PI)
#include "pins/pins_f7_pi.h"
#elif defined(STM32F4_F4M)
#include "pins/pins_f4_f4m.h"
#elif defined(STM32F722_F7M)
#include "pins/pins_f7_f7m.h"
#elif defined(STM32F722_RPT_HAT)
#include "pins/pins_f7_rpt_hat.h"
#elif defined(STM32F4_NUCLEO)
#if defined(STM32F4_NUCLEO_MORPHO_HEADER)
#include "pins/pins_f4_nucleo_morpho.h"
#elif defined(STM32F4_NUCLEO_ARDUINO_HEADER)
#include "pins/pins_f4_nucleo_arduino.h"
#else
#error "Either STM32F4_NUCLEO_MORPHO_HEADER or STM32F4_NUCLEO_ARDUINO_HEADER need to be defined"
#endif
#elif defined(STM32F7_NUCLEO)
#include "pins/pins_f7_nucleo.h"
#elif defined(STM32F4_DVM)
#include "pins/pins_f4_stm32dvm_v3.h"
#elif defined(STM32F7_DVM)
#include "pins/pins_f7_stm32dvm_v5.h"
#elif defined(DRCC_DVM_NQF)
#include "pins/pins_f4_drcc_nqf.h"
#elif defined(DRCC_DVM_HHP446)
#include "pins/pins_f4_drcc_hhp446.h"
#elif defined(STM32F4_EDA_405) || defined(STM32F4_EDA_446)
#include "pins/pins_f4_stm32eda.h"
#else
#error "A valid board type macro need to be defined."
#endif
#endif //#ifndef _IO_PINS_H
+105 -892
View File
File diff suppressed because it is too large Load Diff
-466
View File
@@ -1,466 +0,0 @@
/*
* Copyright (C) 2016 by Jim McLaughlin KI6ZUM
* Copyright (C) 2016, 2017 by Andy Uribe CA6JAU
* Copyright (C) 2017,2018 by Jonathan Naylor G4KLX
* Copyright (C) 2017 by Wojciech Krutnik N0CALL
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "Config.h"
#include "Globals.h"
#include "IO.h"
#if defined(STM32F1)
#if defined(STM32F1_POG)
/*
Pin definitions for STM32F1 POG Board:
PTT PB12 output
COSLED PB5 output
LED PB4 output
COS PB13 input/PD
DSTAR PB7 output
DMR PB6 output
YSF PB8 output
P25 PB9 output
NXDN PB10 output
POCSAG PB11 output
RX PB0 analog input (ADC1_8)
RSSI PB1 analog input (ADC2_9)
TX PA4 analog output (DAC_OUT1)
EXT_CLK PA15 input (AF: TIM2_CH1_ETR)
USART1_TXD PA9 output (AF)
USART1_RXD PA10 input (AF)
*/
#define PIN_PTT 12
#define PORT_PTT GPIOB
#define BB_PTT *((bitband_t)BITBAND_PERIPH(&PORT_PTT->ODR, PIN_PTT))
#define PIN_COSLED 5
#define PORT_COSLED GPIOB
#define BB_COSLED *((bitband_t)BITBAND_PERIPH(&PORT_COSLED->ODR, PIN_COSLED))
#define PIN_LED 4
#define PORT_LED GPIOB
#define BB_LED *((bitband_t)BITBAND_PERIPH(&PORT_LED->ODR, PIN_LED))
#define PIN_COS 13
#define PORT_COS GPIOB
#define BB_COS *((bitband_t)BITBAND_PERIPH(&PORT_COS->IDR, PIN_COS))
#define PIN_DSTAR 7
#define PORT_DSTAR GPIOB
#define BB_DSTAR *((bitband_t)BITBAND_PERIPH(&PORT_DSTAR->ODR, PIN_DSTAR))
#define PIN_DMR 6
#define PORT_DMR GPIOB
#define BB_DMR *((bitband_t)BITBAND_PERIPH(&PORT_DMR->ODR, PIN_DMR))
#define PIN_YSF 8
#define PORT_YSF GPIOB
#define BB_YSF *((bitband_t)BITBAND_PERIPH(&PORT_YSF->ODR, PIN_YSF))
#define PIN_P25 9
#define PORT_P25 GPIOB
#define BB_P25 *((bitband_t)BITBAND_PERIPH(&PORT_P25->ODR, PIN_P25))
#define PIN_NXDN 10
#define PORT_NXDN GPIOB
#define BB_NXDN *((bitband_t)BITBAND_PERIPH(&PORT_NXDN->ODR, PIN_NXDN))
#define PIN_POCSAG 11
#define PORT_POCSAG GPIOB
#define BB_POCSAG *((bitband_t)BITBAND_PERIPH(&PORT_POCSAG->ODR, PIN_POCSAG))
#define PIN_RX 0
#define PIN_RX_ADC_CH 8
#define PORT_RX GPIOB
#define PIN_RSSI 1
#define PIN_RSSI_ADC_CH 9
#define PORT_RSSI GPIOB
#define PIN_TX 4
#define PIN_TX_DAC_CH 1
#define PORT_TX GPIOA
#define PIN_EXT_CLK 15
#define SRC_EXT_CLK 15
#define PORT_EXT_CLK GPIOA
#define PIN_USART1_TXD 9
#define PORT_USART1_TXD GPIOA
#define PIN_USART1_RXD 10
#define PORT_USART1_RXD GPIOA
#else // defined(STM32F1_POG)
#error "Either STM32F1_POG, or sth need to be defined"
#endif // defined(STM32F1_POG)
const uint16_t DC_OFFSET = 2048U;
// Sampling frequency
#define SAMP_FREQ 48000
extern "C" {
void TIM2_IRQHandler() {
if ((TIM2->SR & TIM_SR_UIF) == TIM_SR_UIF) {
TIM2->SR = ~TIM_SR_UIF; // clear UI flag
io.interrupt();
}
}
}
void delay(uint32_t cnt)
{
while(cnt--)
asm("nop");
}
// source: http://www.freddiechopin.info/
void GPIOConfigPin(GPIO_TypeDef *port_ptr, uint32_t pin, uint32_t mode_cnf_value)
{
volatile uint32_t *cr_ptr;
uint32_t cr_value;
cr_ptr = &port_ptr->CRL; // configuration of pins [0,7] is in CRL
if (pin >= 8) // is pin in [8; 15]?
{ // configuration of pins [8,15] is in CRH
cr_ptr++; // advance to next struct element CRL -> CRH
pin -= 8; // crop the pin number
}
cr_value = *cr_ptr; // localize the CRL / CRH value
cr_value &= ~(0xF << (pin * 4)); // clear the MODE and CNF fields (now that pin is an analog input)
cr_value |= (mode_cnf_value << (pin * 4)); // save new MODE and CNF value for desired pin
*cr_ptr = cr_value; // save localized value to CRL / CRL
}
#if defined(STM32F1_POG)
void FancyLEDEffect()
{
bitband_t foo[] = {&BB_LED, &BB_COSLED, &BB_PTT, &BB_DMR, &BB_DSTAR, &BB_YSF, &BB_P25};
for(int i=0; i<7; i++){
*foo[i] = 0x01;
}
GPIOConfigPin(PORT_USART1_TXD, PIN_USART1_TXD, GPIO_CRL_MODE0_1);
*((bitband_t)BITBAND_PERIPH(&PORT_USART1_TXD->ODR, PIN_USART1_TXD)) = 0x00;
delay(SystemCoreClock/1000*100);
for(int i=0; i<7; i++){
*foo[i] = 0x00;
}
*((bitband_t)BITBAND_PERIPH(&PORT_USART1_TXD->ODR, PIN_USART1_TXD)) = 0x01;
delay(SystemCoreClock/1000*20);
*((bitband_t)BITBAND_PERIPH(&PORT_USART1_TXD->ODR, PIN_USART1_TXD)) = 0x00;
delay(SystemCoreClock/1000*10);
*((bitband_t)BITBAND_PERIPH(&PORT_USART1_TXD->ODR, PIN_USART1_TXD)) = 0x01;
*foo[0] = 0x01;
for(int i=1; i<7; i++){
delay(SystemCoreClock/1000*10);
*foo[i-1] = 0x00;
*foo[i] = 0x01;
}
for(int i=5; i>=0; i--){
delay(SystemCoreClock/1000*10);
*foo[i+1] = 0x00;
*foo[i] = 0x01;
}
delay(SystemCoreClock/1000*10);
*foo[5+1-6] = 0x00;
*((bitband_t)BITBAND_PERIPH(&PORT_USART1_TXD->ODR, PIN_USART1_TXD)) = 0x00;
delay(SystemCoreClock/1000*10);
*((bitband_t)BITBAND_PERIPH(&PORT_USART1_TXD->ODR, PIN_USART1_TXD)) = 0x01;
GPIOConfigPin(PORT_USART1_TXD, PIN_USART1_TXD, GPIO_CRL_MODE0_1|GPIO_CRL_CNF0_1);
delay(SystemCoreClock/1000*50);
}
#endif
static inline void GPIOInit()
{
RCC->APB2ENR |= RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN
| RCC_APB2ENR_IOPCEN | RCC_APB2ENR_IOPDEN
| RCC_APB2ENR_AFIOEN; // enable all GPIOs
// set all ports to input with pull-down
GPIOA->CRL = 0x88888888;
GPIOA->CRH = 0x88888888;
GPIOA->ODR = 0;
GPIOB->CRL = 0x88888888;
GPIOB->CRH = 0x88888888;
GPIOB->ODR = 0;
GPIOC->CRL = 0x88888888;
GPIOC->CRH = 0x88888888;
GPIOC->ODR = 0;
GPIOD->CRL = 0x88888888;
GPIOD->CRH = 0x88888888;
GPIOD->ODR = 0;
// configure ports
GPIOConfigPin(PORT_PTT, PIN_PTT, GPIO_CRL_MODE0_1);
GPIOConfigPin(PORT_COSLED, PIN_COSLED, GPIO_CRL_MODE0_1);
GPIOConfigPin(PORT_LED, PIN_LED, GPIO_CRL_MODE0_1);
GPIOConfigPin(PORT_COS, PIN_COS, GPIO_CRL_CNF0_1);
GPIOConfigPin(PORT_DSTAR, PIN_DSTAR, GPIO_CRL_MODE0_1);
GPIOConfigPin(PORT_DMR, PIN_DMR, GPIO_CRL_MODE0_1);
GPIOConfigPin(PORT_YSF, PIN_YSF, GPIO_CRL_MODE0_1);
GPIOConfigPin(PORT_P25, PIN_P25, GPIO_CRL_MODE0_1);
#if !defined(USE_ALTERNATE_NXDN_LEDS)
GPIOConfigPin(PORT_NXDN, PIN_NXDN, GPIO_CRL_MODE0_1);
#endif
#if !defined(USE_ALTERNATE_POCSAG_LEDS)
GPIOConfigPin(PORT_POCSAG, PIN_POCSAG, GPIO_CRL_MODE0_1);
#endif
GPIOConfigPin(PORT_RX, PIN_RX, 0);
#if defined(SEND_RSSI_DATA)
GPIOConfigPin(PORT_RSSI, PIN_RSSI, 0);
#endif
GPIOConfigPin(PORT_TX, PIN_TX, 0);
#if defined(EXTERNAL_OSC)
#if defined(STM32F1_POG)
GPIOConfigPin(PORT_EXT_CLK, PIN_EXT_CLK, GPIO_CRL_CNF0_0);
AFIO->MAPR = (AFIO->MAPR & ~AFIO_MAPR_TIM2_REMAP) | AFIO_MAPR_TIM2_REMAP_0;
#endif
#endif
GPIOConfigPin(PORT_USART1_TXD, PIN_USART1_TXD, GPIO_CRL_MODE0_1|GPIO_CRL_CNF0_1);
GPIOConfigPin(PORT_USART1_RXD, PIN_USART1_RXD, GPIO_CRL_CNF0_0);
AFIO->MAPR = (AFIO->MAPR & ~AFIO_MAPR_SWJ_CFG) | AFIO_MAPR_SWJ_CFG_1;
}
static inline void ADCInit()
{
RCC->CFGR = (RCC->CFGR & ~RCC_CFGR_ADCPRE_Msk)
| RCC_CFGR_ADCPRE_DIV6; // ADC clock divided by 6 (72MHz/6 = 12MHz)
RCC->APB2ENR |= RCC_APB2ENR_ADC1EN;
#if defined(SEND_RSSI_DATA)
RCC->APB2ENR |= RCC_APB2ENR_ADC2EN;
#endif
// Init ADCs in dual mode (RSSI)
#if defined(SEND_RSSI_DATA)
ADC1->CR1 = ADC_CR1_DUALMOD_1|ADC_CR1_DUALMOD_2; // Regular simultaneous mode
#endif
// Set sampling time to 7.5 cycles
if (PIN_RX_ADC_CH < 10) {
ADC1->SMPR2 = ADC_SMPR2_SMP0_0 << (3*PIN_RX_ADC_CH);
} else {
ADC1->SMPR1 = ADC_SMPR1_SMP10_0 << (3*PIN_RX_ADC_CH);
}
#if defined(SEND_RSSI_DATA)
if (PIN_RSSI_ADC_CH < 10) {
ADC2->SMPR2 = ADC_SMPR2_SMP0_0 << (3*PIN_RSSI_ADC_CH);
} else {
ADC2->SMPR1 = ADC_SMPR1_SMP10_0 << (3*PIN_RSSI_ADC_CH);
}
#endif
// Set conversion channel (single conversion)
ADC1->SQR3 = PIN_RX_ADC_CH;
#if defined(SEND_RSSI_DATA)
ADC2->SQR3 = PIN_RSSI_ADC_CH;
#endif
// Enable ADC
ADC1->CR2 |= ADC_CR2_ADON;
#if defined(SEND_RSSI_DATA)
// Enable ADC2
ADC2->CR2 |= ADC_CR2_ADON;
#endif
// Start calibration
delay(6*2);
ADC1->CR2 |= ADC_CR2_CAL;
while((ADC1->CR2 & ADC_CR2_CAL) == ADC_CR2_CAL)
;
#if defined(SEND_RSSI_DATA)
ADC2->CR2 |= ADC_CR2_CAL;
while((ADC2->CR2 & ADC_CR2_CAL) == ADC_CR2_CAL)
;
#endif
// Trigger first conversion
ADC1->CR2 |= ADC_CR2_ADON;
#if defined(SEND_RSSI_DATA)
ADC2->CR2 |= ADC_CR2_ADON;
#endif
}
static inline void DACInit()
{
RCC->APB1ENR |= RCC_APB1ENR_DACEN;
DAC->CR = DAC_CR_EN1;
}
static inline void TimerInit()
{
RCC->APB1ENR |= RCC_APB1ENR_TIM2EN;
#if defined(EXTERNAL_OSC)
// Enable external clock, prescaler /4
TIM2->SMCR = TIM_SMCR_ECE | TIM_SMCR_ETPS_1;
#endif
// TIM2 output frequency
TIM2->PSC = 0;
#if defined(EXTERNAL_OSC)
// TimerCount = ExternalOsc
// /4 (external clock prescaler)
// /SAMP_FREQ
TIM2->ARR = (uint16_t) ((EXTERNAL_OSC/(4*SAMP_FREQ)) - 1);
#else
TIM2->ARR = (uint16_t) ((SystemCoreClock/(SAMP_FREQ)) - 1);
#endif
// Enable TIse 1%-tolerance comM2 interrupt
TIM2->DIER = TIM_DIER_UIE;
NVIC_EnableIRQ(TIM2_IRQn);
// Enable TIM2
TIM2->CR1 |= TIM_CR1_CEN;
}
void CIO::initInt()
{
GPIOInit();
ADCInit();
DACInit();
#if defined(STM32F1_POG)
FancyLEDEffect();
#endif
}
void CIO::startInt()
{
TimerInit();
BB_COSLED = 0;
BB_LED = 1;
}
void CIO::interrupt()
{
uint8_t control = MARK_NONE;
uint16_t sample = DC_OFFSET;
uint16_t rawRSSI = 0U;
bitband_t eoc = (bitband_t)BITBAND_PERIPH(&ADC1->SR, ADC_SR_EOS_Pos);
bitband_t adon = (bitband_t)BITBAND_PERIPH(&ADC1->CR2, ADC_CR2_ADON_Pos);
#if defined(SEND_RSSI_DATA)
bitband_t rssi_adon = (bitband_t)BITBAND_PERIPH(&ADC2->CR2, ADC_CR2_ADON_Pos);
#endif
if (*eoc) {
// trigger next conversion
*adon = 1;
#if defined(SEND_RSSI_DATA)
*rssi_adon = 1;
#endif
m_txBuffer.get(sample, control);
DAC->DHR12R1 = sample; // Send the value to the DAC
// Read value from ADC1 and ADC2
sample = ADC1->DR; // read conversion result; EOC is cleared by this read
m_rxBuffer.put(sample, control);
#if defined(SEND_RSSI_DATA)
rawRSSI = ADC2->DR;
m_rssiBuffer.put(rawRSSI);
#endif
m_watchdog++;
}
}
bool CIO::getCOSInt()
{
return BB_COS;
}
void CIO::setLEDInt(bool on)
{
BB_LED = !!on;
}
void CIO::setPTTInt(bool on)
{
BB_PTT = !!on;
}
void CIO::setCOSInt(bool on)
{
BB_COSLED = !!on;
}
void CIO::setDStarInt(bool on)
{
BB_DSTAR = !!on;
}
void CIO::setDMRInt(bool on)
{
BB_DMR = !!on;
}
void CIO::setYSFInt(bool on)
{
BB_YSF = !!on;
}
void CIO::setP25Int(bool on)
{
BB_P25 = !!on;
}
void CIO::setNXDNInt(bool on)
{
#if defined(USE_ALTERNATE_NXDN_LEDS)
BB_YSF = !!on;
BB_P25 = !!on;
#else
BB_NXDN = !!on;
#endif
}
void CIO::setPOCSAGInt(bool on)
{
#if defined(USE_ALTERNATE_POCSAG_LEDS)
BB_DSTAR = !!on;
BB_DMR = !!on;
#else
BB_POCSAG = !!on;
#endif
}
void CIO::delayInt(unsigned int dly)
{
delay(dly);
}
#endif
+36 -11
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2016,2017,2018 by Jonathan Naylor G4KLX * Copyright (C) 2016,2017,2018,2020,2025 by Jonathan Naylor G4KLX
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
@@ -37,9 +37,11 @@
#if defined(__MK20DX256__) #if defined(__MK20DX256__)
#define PIN_NXDN 2 #define PIN_NXDN 2
#define PIN_POCSAG 3 #define PIN_POCSAG 3
#define PIN_FM 4
#else #else
#define PIN_NXDN 24 #define PIN_NXDN 24
#define PIN_POCSAG 25 #define PIN_POCSAG 25
#define PIN_FM 26
#endif #endif
#define PIN_ADC 5 // A0, Pin 14 #define PIN_ADC 5 // A0, Pin 14
#define PIN_RSSI 4 // Teensy 3.5/3.6, A16, Pin 35. Teensy 3.1/3.2, A17, Pin 28 #define PIN_RSSI 4 // Teensy 3.5/3.6, A16, Pin 35. Teensy 3.1/3.2, A17, Pin 28
@@ -76,6 +78,9 @@ void CIO::initInt()
#if !defined(USE_ALTERNATE_POCSAG_LEDS) #if !defined(USE_ALTERNATE_POCSAG_LEDS)
pinMode(PIN_POCSAG, OUTPUT); pinMode(PIN_POCSAG, OUTPUT);
#endif #endif
#if !defined(USE_ALTERNATE_FM_LEDS)
pinMode(PIN_FM, OUTPUT);
#endif
#endif #endif
} }
@@ -125,7 +130,7 @@ void CIO::startInt()
#endif #endif
#if defined(EXTERNAL_OSC) #if defined(EXTERNAL_OSC)
// Set ADC0 to trigger from the LPTMR at 48 kHz // Set ADC0 to trigger from the LPTMR at 24 kHz
SIM_SOPT7 = SIM_SOPT7_ADC0ALTTRGEN | // Enable ADC0 alternate trigger SIM_SOPT7 = SIM_SOPT7_ADC0ALTTRGEN | // Enable ADC0 alternate trigger
SIM_SOPT7_ADC0TRGSEL(14); // Trigger ADC0 by LPTMR0 SIM_SOPT7_ADC0TRGSEL(14); // Trigger ADC0 by LPTMR0
@@ -134,14 +139,14 @@ void CIO::startInt()
SIM_SCGC5 |= SIM_SCGC5_LPTIMER; // Enable Low Power Timer Access SIM_SCGC5 |= SIM_SCGC5_LPTIMER; // Enable Low Power Timer Access
LPTMR0_CSR = 0; // Disable LPTMR0_CSR = 0; // Disable
LPTMR0_PSR = LPTMR_PSR_PBYP; // Bypass prescaler/filter LPTMR0_PSR = LPTMR_PSR_PBYP; // Bypass prescaler/filter
LPTMR0_CMR = (EXTERNAL_OSC / 48000) - 1; // Frequency divided by CMR + 1 LPTMR0_CMR = (EXTERNAL_OSC / 24000) - 1; // Frequency divided by CMR + 1
LPTMR0_CSR = LPTMR_CSR_TPS(2) | // Pin: 0=CMP0, 1=xtal, 2=pin13 LPTMR0_CSR = LPTMR_CSR_TPS(2) | // Pin: 0=CMP0, 1=xtal, 2=pin13
LPTMR_CSR_TMS; // Mode Select, 0=timer, 1=counter LPTMR_CSR_TMS; // Mode Select, 0=timer, 1=counter
LPTMR0_CSR |= LPTMR_CSR_TEN; // Enable LPTMR0_CSR |= LPTMR_CSR_TEN; // Enable
#else #else
// Setup PDB for ADC0 at 48 kHz // Setup PDB for ADC0 at 24 kHz
SIM_SCGC6 |= SIM_SCGC6_PDB; // Enable PDB clock SIM_SCGC6 |= SIM_SCGC6_PDB; // Enable PDB clock
PDB0_MOD = (F_BUS / 48000) - 1; // Timer period - 1 PDB0_MOD = (F_BUS / 24000) - 1; // Timer period - 1
PDB0_IDLY = 0; // Interrupt delay PDB0_IDLY = 0; // Interrupt delay
PDB0_CH0C1 = PDB_CHnC1_TOS | PDB_CHnC1_EN; // Enable pre-trigger for ADC0 PDB0_CH0C1 = PDB_CHnC1_TOS | PDB_CHnC1_EN; // Enable pre-trigger for ADC0
PDB0_SC = PDB_SC_TRGSEL(15) | PDB_SC_PDBEN | // SW trigger, enable interrupts, continuous mode PDB0_SC = PDB_SC_TRGSEL(15) | PDB_SC_PDBEN | // SW trigger, enable interrupts, continuous mode
@@ -156,15 +161,14 @@ void CIO::startInt()
void CIO::interrupt() void CIO::interrupt()
{ {
uint8_t control = MARK_NONE; TSample sample = {DC_OFFSET, MARK_NONE};
uint16_t sample = DC_OFFSET;
m_txBuffer.get(sample, control); m_txBuffer.get(sample);
*(int16_t *)&(DAC0_DAT0L) = sample; *(int16_t *)&(DAC0_DAT0L) = sample.sample;
if ((ADC0_SC1A & ADC_SC1_COCO) == ADC_SC1_COCO) { if ((ADC0_SC1A & ADC_SC1_COCO) == ADC_SC1_COCO) {
sample = ADC0_RA; sample.sample = ADC0_RA;
m_rxBuffer.put(sample, control); m_rxBuffer.put(sample);
} }
#if defined(SEND_RSSI_DATA) #if defined(SEND_RSSI_DATA)
@@ -243,9 +247,30 @@ void CIO::setPOCSAGInt(bool on)
#endif #endif
} }
void CIO::setFMInt(bool on)
{
#if defined(USE_ALTERNATE_FM_LEDS)
digitalWrite(PIN_DSTAR, on ? HIGH : LOW);
digitalWrite(PIN_YSF, on ? HIGH : LOW);
#else
digitalWrite(PIN_FM, on ? HIGH : LOW);
#endif
}
void CIO::delayInt(unsigned int dly) void CIO::delayInt(unsigned int dly)
{ {
delay(dly); delay(dly);
} }
uint8_t CIO::getCPU() const
{
return 1U;
}
void CIO::getUDID(uint8_t* buffer)
{
::memcpy(buffer, (void *)0x4058, 16U);
}
#endif #endif
+85 -26
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2015,2016,2017,2018 by Jonathan Naylor G4KLX * Copyright (C) 2015,2016,2017,2018,2020,2021,2025 by Jonathan Naylor G4KLX
* Copyright (C) 2016 by Mathis Schmieder DB9MAT * Copyright (C) 2016 by Mathis Schmieder DB9MAT
* Copyright (C) 2016 by Colin Durbridge G4EML * Copyright (C) 2016 by Colin Durbridge G4EML
* *
@@ -18,7 +18,7 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/ */
#if defined(STM32F4XX) || defined(STM32F7XX) || defined(STM32F105xC) #if defined(STM32F4XX) || defined(STM32F7XX)
#include "Config.h" #include "Config.h"
#include "Globals.h" #include "Globals.h"
@@ -32,39 +32,62 @@ bool m_ysfEnable = true;
bool m_p25Enable = true; bool m_p25Enable = true;
bool m_nxdnEnable = true; bool m_nxdnEnable = true;
bool m_pocsagEnable = true; bool m_pocsagEnable = true;
bool m_fmEnable = true;
bool m_duplex = true; bool m_duplex = true;
bool m_tx = false; bool m_tx = false;
bool m_dcd = false; bool m_dcd = false;
CDStarRX dstarRX; #if defined(MODE_DSTAR)
CDStarTX dstarTX; CDStarRX dstarRX;
CDStarTX dstarTX;
CDMRIdleRX dmrIdleRX;
CDMRRX dmrRX;
CDMRTX dmrTX;
CDMRDMORX dmrDMORX;
CDMRDMOTX dmrDMOTX;
CYSFRX ysfRX;
CYSFTX ysfTX;
CP25RX p25RX;
CP25TX p25TX;
CNXDNRX nxdnRX;
CNXDNTX nxdnTX;
CPOCSAGTX pocsagTX;
CCalDStarRX calDStarRX; CCalDStarRX calDStarRX;
CCalDStarTX calDStarTX; CCalDStarTX calDStarTX;
CCalDMR calDMR; #endif
CCalP25 calP25;
CCalNXDN calNXDN; #if defined(MODE_DMR)
CCalRSSI calRSSI; CDMRIdleRX dmrIdleRX;
CDMRRX dmrRX;
CDMRTX dmrTX;
CDMRDMORX dmrDMORX;
CDMRDMOTX dmrDMOTX;
CCalDMR calDMR;
#endif
#if defined(MODE_YSF)
CYSFRX ysfRX;
CYSFTX ysfTX;
#endif
#if defined(MODE_P25)
CP25RX p25RX;
CP25TX p25TX;
CCalP25 calP25;
#endif
#if defined(MODE_NXDN)
CNXDNRX nxdnRX;
CNXDNTX nxdnTX;
CCalNXDN calNXDN;
#endif
#if defined(MODE_POCSAG)
CPOCSAGTX pocsagTX;
CCalPOCSAG calPOCSAG;
#endif
#if defined(MODE_FM)
CFM fm;
CCalFM calFM;
#endif
CCalRSSI calRSSI;
CCWIdTX cwIdTX; CCWIdTX cwIdTX;
@@ -83,39 +106,74 @@ void loop()
io.process(); io.process();
// The following is for transmitting // The following is for transmitting
#if defined(MODE_DSTAR)
if (m_dstarEnable && m_modemState == STATE_DSTAR) if (m_dstarEnable && m_modemState == STATE_DSTAR)
dstarTX.process(); dstarTX.process();
#endif
#if defined(MODE_DMR)
if (m_dmrEnable && m_modemState == STATE_DMR) { if (m_dmrEnable && m_modemState == STATE_DMR) {
if (m_duplex) if (m_duplex)
dmrTX.process(); dmrTX.process();
else else
dmrDMOTX.process(); dmrDMOTX.process();
} }
#endif
#if defined(MODE_YSF)
if (m_ysfEnable && m_modemState == STATE_YSF) if (m_ysfEnable && m_modemState == STATE_YSF)
ysfTX.process(); ysfTX.process();
#endif
#if defined(MODE_P25)
if (m_p25Enable && m_modemState == STATE_P25) if (m_p25Enable && m_modemState == STATE_P25)
p25TX.process(); p25TX.process();
#endif
#if defined(MODE_NXDN)
if (m_nxdnEnable && m_modemState == STATE_NXDN) if (m_nxdnEnable && m_modemState == STATE_NXDN)
nxdnTX.process(); nxdnTX.process();
#endif
#if defined(MODE_POCSAG)
if (m_pocsagEnable && (m_modemState == STATE_POCSAG || pocsagTX.busy())) if (m_pocsagEnable && (m_modemState == STATE_POCSAG || pocsagTX.busy()))
pocsagTX.process(); pocsagTX.process();
#endif
#if defined(MODE_FM)
if (m_fmEnable && m_modemState == STATE_FM)
fm.process();
#endif
#if defined(MODE_DSTAR)
if (m_modemState == STATE_DSTARCAL) if (m_modemState == STATE_DSTARCAL)
calDStarTX.process(); calDStarTX.process();
#endif
#if defined(MODE_DMR)
if (m_modemState == STATE_DMRCAL || m_modemState == STATE_LFCAL || m_modemState == STATE_DMRCAL1K || m_modemState == STATE_DMRDMO1K) if (m_modemState == STATE_DMRCAL || m_modemState == STATE_LFCAL || m_modemState == STATE_DMRCAL1K || m_modemState == STATE_DMRDMO1K)
calDMR.process(); calDMR.process();
#endif
#if defined(MODE_FM)
if (m_modemState == STATE_FMCAL10K || m_modemState == STATE_FMCAL12K || m_modemState == STATE_FMCAL15K || m_modemState == STATE_FMCAL20K || m_modemState == STATE_FMCAL25K || m_modemState == STATE_FMCAL30K)
calFM.process();
#endif
#if defined(MODE_P25)
if (m_modemState == STATE_P25CAL1K) if (m_modemState == STATE_P25CAL1K)
calP25.process(); calP25.process();
#endif
#if defined(MODE_NXDN)
if (m_modemState == STATE_NXDNCAL1K) if (m_modemState == STATE_NXDNCAL1K)
calNXDN.process(); calNXDN.process();
#endif
#if defined(MODE_POCSAG)
if (m_modemState == STATE_POCSAGCAL)
calPOCSAG.process();
#endif
if (m_modemState == STATE_IDLE) if (m_modemState == STATE_IDLE)
cwIdTX.process(); cwIdTX.process();
@@ -130,3 +188,4 @@ int main()
} }
#endif #endif
+83 -25
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2015,2016,2017,2018 by Jonathan Naylor G4KLX * Copyright (C) 2015,2016,2017,2018,2020,2021,2025 by Jonathan Naylor G4KLX
* Copyright (C) 2016 by Colin Durbridge G4EML * Copyright (C) 2016 by Colin Durbridge G4EML
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
@@ -29,39 +29,62 @@ bool m_ysfEnable = true;
bool m_p25Enable = true; bool m_p25Enable = true;
bool m_nxdnEnable = true; bool m_nxdnEnable = true;
bool m_pocsagEnable = true; bool m_pocsagEnable = true;
bool m_fmEnable = true;
bool m_duplex = true; bool m_duplex = true;
bool m_tx = false; bool m_tx = false;
bool m_dcd = false; bool m_dcd = false;
CDStarRX dstarRX; #if defined(MODE_DSTAR)
CDStarTX dstarTX; CDStarRX dstarRX;
CDStarTX dstarTX;
CDMRIdleRX dmrIdleRX;
CDMRRX dmrRX;
CDMRTX dmrTX;
CDMRDMORX dmrDMORX;
CDMRDMOTX dmrDMOTX;
CYSFRX ysfRX;
CYSFTX ysfTX;
CP25RX p25RX;
CP25TX p25TX;
CNXDNRX nxdnRX;
CNXDNTX nxdnTX;
CPOCSAGTX pocsagTX;
CCalDStarRX calDStarRX; CCalDStarRX calDStarRX;
CCalDStarTX calDStarTX; CCalDStarTX calDStarTX;
CCalDMR calDMR; #endif
CCalP25 calP25;
CCalNXDN calNXDN; #if defined(MODE_DMR)
CCalRSSI calRSSI; CDMRIdleRX dmrIdleRX;
CDMRRX dmrRX;
CDMRTX dmrTX;
CDMRDMORX dmrDMORX;
CDMRDMOTX dmrDMOTX;
CCalDMR calDMR;
#endif
#if defined(MODE_YSF)
CYSFRX ysfRX;
CYSFTX ysfTX;
#endif
#if defined(MODE_P25)
CP25RX p25RX;
CP25TX p25TX;
CCalP25 calP25;
#endif
#if defined(MODE_NXDN)
CNXDNRX nxdnRX;
CNXDNTX nxdnTX;
CCalNXDN calNXDN;
#endif
#if defined(MODE_POCSAG)
CPOCSAGTX pocsagTX;
CCalPOCSAG calPOCSAG;
#endif
#if defined(MODE_FM)
CFM fm;
CCalFM calFM;
#endif
CCalRSSI calRSSI;
CCWIdTX cwIdTX; CCWIdTX cwIdTX;
@@ -80,39 +103,74 @@ void loop()
io.process(); io.process();
// The following is for transmitting // The following is for transmitting
#if defined(MODE_DSTAR)
if (m_dstarEnable && m_modemState == STATE_DSTAR) if (m_dstarEnable && m_modemState == STATE_DSTAR)
dstarTX.process(); dstarTX.process();
#endif
#if defined(MODE_DMR)
if (m_dmrEnable && m_modemState == STATE_DMR) { if (m_dmrEnable && m_modemState == STATE_DMR) {
if (m_duplex) if (m_duplex)
dmrTX.process(); dmrTX.process();
else else
dmrDMOTX.process(); dmrDMOTX.process();
} }
#endif
#if defined(MODE_YSF)
if (m_ysfEnable && m_modemState == STATE_YSF) if (m_ysfEnable && m_modemState == STATE_YSF)
ysfTX.process(); ysfTX.process();
#endif
#if defined(MODE_P25)
if (m_p25Enable && m_modemState == STATE_P25) if (m_p25Enable && m_modemState == STATE_P25)
p25TX.process(); p25TX.process();
#endif
#if defined(MODE_NXDN)
if (m_nxdnEnable && m_modemState == STATE_NXDN) if (m_nxdnEnable && m_modemState == STATE_NXDN)
nxdnTX.process(); nxdnTX.process();
#endif
#if defined(MODE_POCSAG)
if (m_pocsagEnable && (m_modemState == STATE_POCSAG || pocsagTX.busy())) if (m_pocsagEnable && (m_modemState == STATE_POCSAG || pocsagTX.busy()))
pocsagTX.process(); pocsagTX.process();
#endif
#if defined(MODE_FM)
if (m_fmEnable && m_modemState == STATE_FM)
fm.process();
#endif
#if defined(MODE_DSTAR)
if (m_modemState == STATE_DSTARCAL) if (m_modemState == STATE_DSTARCAL)
calDStarTX.process(); calDStarTX.process();
#endif
#if defined(MODE_DMR)
if (m_modemState == STATE_DMRCAL || m_modemState == STATE_LFCAL || m_modemState == STATE_DMRCAL1K || m_modemState == STATE_DMRDMO1K) if (m_modemState == STATE_DMRCAL || m_modemState == STATE_LFCAL || m_modemState == STATE_DMRCAL1K || m_modemState == STATE_DMRDMO1K)
calDMR.process(); calDMR.process();
#endif
#if defined(MODE_FM)
if (m_modemState == STATE_FMCAL10K || m_modemState == STATE_FMCAL12K || m_modemState == STATE_FMCAL15K || m_modemState == STATE_FMCAL20K || m_modemState == STATE_FMCAL25K || m_modemState == STATE_FMCAL30K)
calFM.process();
#endif
#if defined(MODE_P25)
if (m_modemState == STATE_P25CAL1K) if (m_modemState == STATE_P25CAL1K)
calP25.process(); calP25.process();
#endif
#if defined(MODE_NXDN)
if (m_modemState == STATE_NXDNCAL1K) if (m_modemState == STATE_NXDNCAL1K)
calNXDN.process(); calNXDN.process();
#endif
#if defined(MODE_POCSAG)
if (m_modemState == STATE_POCSAGCAL)
calPOCSAG.process();
#endif
if (m_modemState == STATE_IDLE) if (m_modemState == STATE_IDLE)
cwIdTX.process(); cwIdTX.process();
-360
View File
@@ -1,360 +0,0 @@
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<Project version="2G - 2.0.5" name="MMDVM_STM32F4xx">
<Target name="MMDVM_Discovery_407" isCurrent="0">
<Device manufacturerId="9" manufacturerName="ST" chipId="261" chipName="STM32F407VG" boardId="" boardName="" boardUrl="" coreId="" coreName=""/>
<BuildOption>
<Compile>
<Option name="OptimizationLevel" value="4"/>
<Option name="UseFPU" value="0"/>
<Option name="UserEditCompiler" value=""/>
<Option name="SupportCPlusplus" value="1"/>
<Option name="FPU" value="2"/>
<Option name="DEBUG" value="2"/>
<Option name="WARNING" value="1"/>
<Includepaths>
<Includepath path="."/>
</Includepaths>
<DefinedSymbols>
<Define name="STM32F4XX"/>
<Define name="USE_STDPERIPH_DRIVER"/>
<Define name="__ASSEMBLY__"/>
<Define name="SUPPORT_CPLUSPLUS"/>
<Define name="STM32F40_41xxx"/>
<Define name="HSE_VALUE=8000000"/>
<Define name="STM32F4_DISCOVERY"/>
<Define name="__FPU_USED"/>
</DefinedSymbols>
</Compile>
<Link useDefault="0">
<Option name="DiscardUnusedSection" value="0"/>
<Option name="UserEditLinkder" value=""/>
<Option name="UseMemoryLayout" value="0"/>
<Option name="nostartfiles" value="1"/>
<Option name="LTO" value="0"/>
<Option name="IsNewStartupCode" value="1"/>
<Option name="Library" value="Semihosting"/>
<Option name="UserEditLinker" value="-lstdc++; --specs=nano.specs;"/>
<LinkedLibraries>
<Libset dir="stm32f4xx_lib\cmsis\lib\gcc\" libs="arm_cortexm4lf_math"/>
</LinkedLibraries>
<MemoryAreas debugInFlashNotRAM="1">
<Memory name="IROM1" type="ReadOnly" size="0x00100000" startValue="0x08000000"/>
<Memory name="IRAM1" type="ReadWrite" size="0x00020000" startValue="0x20000000"/>
<Memory name="IROM2" type="ReadOnly" size="" startValue=""/>
<Memory name="IRAM2" type="ReadWrite" size="0x00010000" startValue="0x10000000"/>
</MemoryAreas>
<LocateLinkFile path="./stm32f4xx_link.ld" type="0"/>
</Link>
<Output>
<Option name="OutputFileType" value="0"/>
<Option name="Path" value="./"/>
<Option name="Name" value="MMDVM_DIS"/>
<Option name="HEX" value="1"/>
<Option name="BIN" value="1"/>
</Output>
<User>
<UserRun name="Run#1" type="Before" checked="0" value=""/>
<UserRun name="Run#1" type="After" checked="0" value=""/>
</User>
</BuildOption>
<DebugOption>
<Option name="org.coocox.codebugger.gdbjtag.core.adapter" value="ST-Link"/>
<Option name="org.coocox.codebugger.gdbjtag.core.debugMode" value="SWD"/>
<Option name="org.coocox.codebugger.gdbjtag.core.clockDiv" value="1M"/>
<Option name="org.coocox.codebugger.gdbjtag.corerunToMain" value="1"/>
<Option name="org.coocox.codebugger.gdbjtag.core.jlinkgdbserver" value=""/>
<Option name="org.coocox.codebugger.gdbjtag.core.userDefineGDBScript" value=""/>
<Option name="org.coocox.codebugger.gdbjtag.core.targetEndianess" value="0"/>
<Option name="org.coocox.codebugger.gdbjtag.core.jlinkResetMode" value="Type 0: Normal"/>
<Option name="org.coocox.codebugger.gdbjtag.core.resetMode" value="SYSRESETREQ"/>
<Option name="org.coocox.codebugger.gdbjtag.core.ifSemihost" value="0"/>
<Option name="org.coocox.codebugger.gdbjtag.core.ifCacheRom" value="1"/>
<Option name="org.coocox.codebugger.gdbjtag.core.ipAddress" value="127.0.0.1"/>
<Option name="org.coocox.codebugger.gdbjtag.core.portNumber" value="2009"/>
<Option name="org.coocox.codebugger.gdbjtag.core.autoDownload" value="1"/>
<Option name="org.coocox.codebugger.gdbjtag.core.verify" value="1"/>
<Option name="org.coocox.codebugger.gdbjtag.core.downloadFuction" value="Erase Effected"/>
<Option name="org.coocox.codebugger.gdbjtag.core.defaultAlgorithm" value="STM32F4xx_1024.elf"/>
</DebugOption>
<ExcludeFile/>
</Target>
<Target name="MMDVM_Pi_446" isCurrent="0">
<Device manufacturerId="9" manufacturerName="ST" chipId="344" chipName="STM32F407VG" boardId="" boardName="" boardUrl="" coreId="" coreName=""/>
<BuildOption>
<Compile>
<Option name="OptimizationLevel" value="4"/>
<Option name="UseFPU" value="0"/>
<Option name="UserEditCompiler" value=""/>
<Option name="SupportCPlusplus" value="1"/>
<Option name="FPU" value="2"/>
<Includepaths>
<Includepath path="."/>
</Includepaths>
<DefinedSymbols>
<Define name="STM32F4XX"/>
<Define name="USE_STDPERIPH_DRIVER"/>
<Define name="__ASSEMBLY__"/>
<Define name="SUPPORT_CPLUSPLUS"/>
<Define name="__FPU_USED"/>
<Define name="STM32F446xx"/>
<Define name="HSE_VALUE=12000000"/>
<Define name="STM32F4_PI"/>
<Define name="ARDUINO_MODE_PINS"/>
</DefinedSymbols>
</Compile>
<Link useDefault="0">
<Option name="DiscardUnusedSection" value="0"/>
<Option name="UserEditLinkder" value=""/>
<Option name="UseMemoryLayout" value="0"/>
<Option name="nostartfiles" value="1"/>
<Option name="LTO" value="0"/>
<Option name="IsNewStartupCode" value="1"/>
<Option name="Library" value="Semihosting"/>
<Option name="UserEditLinker" value="-lstdc++; --specs=nano.specs;"/>
<LinkedLibraries>
<Libset dir="stm32f4xx_lib\cmsis\lib\gcc\" libs="arm_cortexm4lf_math"/>
</LinkedLibraries>
<MemoryAreas debugInFlashNotRAM="1">
<Memory name="IROM1" type="ReadOnly" size="0x00100000" startValue="0x08000000"/>
<Memory name="IRAM1" type="ReadWrite" size="0x00020000" startValue="0x20000000"/>
<Memory name="IROM2" type="ReadOnly" size="" startValue=""/>
<Memory name="IRAM2" type="ReadWrite" size="0x00010000" startValue="0x10000000"/>
</MemoryAreas>
<LocateLinkFile path="./stm32f4xx_link.ld" type="0"/>
</Link>
<Output>
<Option name="OutputFileType" value="0"/>
<Option name="Path" value="./"/>
<Option name="Name" value="MMDVM_PI"/>
<Option name="HEX" value="1"/>
<Option name="BIN" value="1"/>
</Output>
<User>
<UserRun name="Run#1" type="Before" checked="0" value=""/>
<UserRun name="Run#1" type="After" checked="0" value=""/>
</User>
</BuildOption>
<DebugOption>
<Option name="org.coocox.codebugger.gdbjtag.core.adapter" value="ST-Link"/>
<Option name="org.coocox.codebugger.gdbjtag.core.debugMode" value="SWD"/>
<Option name="org.coocox.codebugger.gdbjtag.core.clockDiv" value="1M"/>
<Option name="org.coocox.codebugger.gdbjtag.corerunToMain" value="1"/>
<Option name="org.coocox.codebugger.gdbjtag.core.jlinkgdbserver" value=""/>
<Option name="org.coocox.codebugger.gdbjtag.core.userDefineGDBScript" value=""/>
<Option name="org.coocox.codebugger.gdbjtag.core.targetEndianess" value="0"/>
<Option name="org.coocox.codebugger.gdbjtag.core.jlinkResetMode" value="Type 0: Normal"/>
<Option name="org.coocox.codebugger.gdbjtag.core.resetMode" value="SYSRESETREQ"/>
<Option name="org.coocox.codebugger.gdbjtag.core.ifSemihost" value="0"/>
<Option name="org.coocox.codebugger.gdbjtag.core.ifCacheRom" value="1"/>
<Option name="org.coocox.codebugger.gdbjtag.core.ipAddress" value="127.0.0.1"/>
<Option name="org.coocox.codebugger.gdbjtag.core.portNumber" value="2009"/>
<Option name="org.coocox.codebugger.gdbjtag.core.autoDownload" value="1"/>
<Option name="org.coocox.codebugger.gdbjtag.core.verify" value="1"/>
<Option name="org.coocox.codebugger.gdbjtag.core.downloadFuction" value="Erase Effected"/>
<Option name="org.coocox.codebugger.gdbjtag.core.defaultAlgorithm" value="STM32F4xx_1024.elf"/>
</DebugOption>
<ExcludeFile/>
</Target>
<Target name="MMDVM_Nucleo_446" isCurrent="1">
<Device manufacturerId="9" manufacturerName="ST" chipId="261" chipName="STM32F407VG" boardId="" boardName="" boardUrl="" coreId="" coreName=""/>
<BuildOption>
<Compile>
<Option name="OptimizationLevel" value="4"/>
<Option name="UseFPU" value="0"/>
<Option name="UserEditCompiler" value=""/>
<Option name="SupportCPlusplus" value="1"/>
<Option name="FPU" value="2"/>
<Option name="DEBUG" value="2"/>
<Option name="WARNING" value="0"/>
<Includepaths>
<Includepath path="."/>
</Includepaths>
<DefinedSymbols>
<Define name="STM32F4XX"/>
<Define name="USE_STDPERIPH_DRIVER"/>
<Define name="__ASSEMBLY__"/>
<Define name="SUPPORT_CPLUSPLUS"/>
<Define name="HSE_VALUE=8000000"/>
<Define name="__FPU_USED"/>
<Define name="STM32F4_NUCLEO"/>
<Define name="STM32F446xx"/>
</DefinedSymbols>
</Compile>
<Link useDefault="0">
<Option name="DiscardUnusedSection" value="0"/>
<Option name="UserEditLinkder" value=""/>
<Option name="UseMemoryLayout" value="0"/>
<Option name="nostartfiles" value="1"/>
<Option name="LTO" value="0"/>
<Option name="IsNewStartupCode" value="1"/>
<Option name="Library" value="Semihosting"/>
<Option name="UserEditLinker" value="-lstdc++; --specs=nano.specs;"/>
<LinkedLibraries>
<Libset dir="stm32f4xx_lib\cmsis\lib\gcc\" libs="arm_cortexm4lf_math"/>
</LinkedLibraries>
<MemoryAreas debugInFlashNotRAM="1">
<Memory name="IROM1" type="ReadOnly" size="0x00100000" startValue="0x08000000"/>
<Memory name="IRAM1" type="ReadWrite" size="0x00020000" startValue="0x20000000"/>
<Memory name="IROM2" type="ReadOnly" size="" startValue=""/>
<Memory name="IRAM2" type="ReadWrite" size="0x00010000" startValue="0x10000000"/>
</MemoryAreas>
<LocateLinkFile path="./stm32f4xx_link.ld" type="0"/>
</Link>
<Output>
<Option name="OutputFileType" value="0"/>
<Option name="Path" value="./"/>
<Option name="Name" value="MMDVM_NUCLEO"/>
<Option name="HEX" value="1"/>
<Option name="BIN" value="1"/>
</Output>
<User>
<UserRun name="Run#1" type="Before" checked="0" value=""/>
<UserRun name="Run#1" type="After" checked="0" value=""/>
</User>
</BuildOption>
<DebugOption>
<Option name="org.coocox.codebugger.gdbjtag.core.adapter" value="ST-Link"/>
<Option name="org.coocox.codebugger.gdbjtag.core.debugMode" value="SWD"/>
<Option name="org.coocox.codebugger.gdbjtag.core.clockDiv" value="1M"/>
<Option name="org.coocox.codebugger.gdbjtag.corerunToMain" value="1"/>
<Option name="org.coocox.codebugger.gdbjtag.core.jlinkgdbserver" value=""/>
<Option name="org.coocox.codebugger.gdbjtag.core.userDefineGDBScript" value=""/>
<Option name="org.coocox.codebugger.gdbjtag.core.targetEndianess" value="0"/>
<Option name="org.coocox.codebugger.gdbjtag.core.jlinkResetMode" value="Type 0: Normal"/>
<Option name="org.coocox.codebugger.gdbjtag.core.resetMode" value="SYSRESETREQ"/>
<Option name="org.coocox.codebugger.gdbjtag.core.ifSemihost" value="0"/>
<Option name="org.coocox.codebugger.gdbjtag.core.ifCacheRom" value="1"/>
<Option name="org.coocox.codebugger.gdbjtag.core.ipAddress" value="127.0.0.1"/>
<Option name="org.coocox.codebugger.gdbjtag.core.portNumber" value="2009"/>
<Option name="org.coocox.codebugger.gdbjtag.core.autoDownload" value="1"/>
<Option name="org.coocox.codebugger.gdbjtag.core.verify" value="1"/>
<Option name="org.coocox.codebugger.gdbjtag.core.downloadFuction" value="Erase Effected"/>
<Option name="org.coocox.codebugger.gdbjtag.core.defaultAlgorithm" value="STM32F4xx_1024.elf"/>
</DebugOption>
<ExcludeFile/>
</Target>
<Components path="./"/>
<LocalComponents/>
<Files>
<File name="DMRIdleRX.h" path="DMRIdleRX.h" type="1"/>
<File name="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/source/stm32f4xx_dac.c" path="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/source/stm32f4xx_dac.c" type="1"/>
<File name="DMRDMOTX.cpp" path="DMRDMOTX.cpp" type="1"/>
<File name="DMRRX.cpp" path="DMRRX.cpp" type="1"/>
<File name="YSFRX.cpp" path="YSFRX.cpp" type="1"/>
<File name="STM32F4XX_Lib/Device/stm32f4xx.h" path="STM32F4XX_Lib/Device/stm32f4xx.h" type="1"/>
<File name="SampleRB.cpp" path="SampleRB.cpp" type="1"/>
<File name="CalDStarTX.h" path="CalDStarTX.h" type="1"/>
<File name="CalNXDN.cpp" path="CalNXDN.cpp" type="1"/>
<File name="NXDNTX.cpp" path="NXDNTX.cpp" type="1"/>
<File name="STM32F4XX_Lib/CMSIS/Include/core_cm4.h" path="STM32F4XX_Lib/CMSIS/Include/core_cm4.h" type="1"/>
<File name="I2CTeensy.cpp" path="I2CTeensy.cpp" type="1"/>
<File name="DMRSlotRX.h" path="DMRSlotRX.h" type="1"/>
<File name="YSFRX.h" path="YSFRX.h" type="1"/>
<File name="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/source/stm32f4xx_tim.c" path="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/source/stm32f4xx_tim.c" type="1"/>
<File name="STM32F4XX_Lib/CMSIS/Include" path="" type="2"/>
<File name="NXDNRX.cpp" path="NXDNRX.cpp" type="1"/>
<File name="IO.cpp" path="IO.cpp" type="1"/>
<File name="DMRDMORX.cpp" path="DMRDMORX.cpp" type="1"/>
<File name="P25RX.h" path="P25RX.h" type="1"/>
<File name="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/source/misc.c" path="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/source/misc.c" type="1"/>
<File name="STM32F4XX_Lib/CMSIS" path="" type="2"/>
<File name="SerialArduino.cpp" path="SerialArduino.cpp" type="1"/>
<File name="SerialPort.cpp" path="SerialPort.cpp" type="1"/>
<File name="CalP25.cpp" path="CalP25.cpp" type="1"/>
<File name="STM32F4XX_Lib/Device/stm32f4xx_conf.h" path="STM32F4XX_Lib/Device/stm32f4xx_conf.h" type="1"/>
<File name="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/source/stm32f4xx_adc.c" path="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/source/stm32f4xx_adc.c" type="1"/>
<File name="IOSTM_CMSIS.cpp" path="IOSTM_CMSIS.cpp" type="1"/>
<File name="DStarTX.cpp" path="DStarTX.cpp" type="1"/>
<File name="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/source/stm32f4xx_usart.c" path="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/source/stm32f4xx_usart.c" type="1"/>
<File name="YSFTX.h" path="YSFTX.h" type="1"/>
<File name="SampleRB.h" path="SampleRB.h" type="1"/>
<File name="SerialSTM_CMSIS.cpp" path="SerialSTM_CMSIS.cpp" type="1"/>
<File name="DMRRX.h" path="DMRRX.h" type="1"/>
<File name="IOTeensy.cpp" path="IOTeensy.cpp" type="1"/>
<File name="MMDVM.cpp" path="MMDVM.cpp" type="1"/>
<File name="STM32F4XX_Lib/CMSIS/Include/core_cmSimd.h" path="STM32F4XX_Lib/CMSIS/Include/core_cmSimd.h" type="1"/>
<File name="POCSAGTX.cpp" path="POCSAGTX.cpp" type="1"/>
<File name="DMRDMORX.h" path="DMRDMORX.h" type="1"/>
<File name="GitVersion.h" path="GitVersion.h" type="1"/>
<File name="SerialPort.h" path="SerialPort.h" type="1"/>
<File name="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/include/stm32f4xx_dac.h" path="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/include/stm32f4xx_dac.h" type="1"/>
<File name="STM32F4XX_Lib/CMSIS/Include/core_cmFunc.h" path="STM32F4XX_Lib/CMSIS/Include/core_cmFunc.h" type="1"/>
<File name="STM32F4XX_Lib/Device/system_stm32f4xx.h" path="STM32F4XX_Lib/Device/system_stm32f4xx.h" type="1"/>
<File name="CWIdTX.h" path="CWIdTX.h" type="1"/>
<File name="CalDStarTX.cpp" path="CalDStarTX.cpp" type="1"/>
<File name="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/source" path="" type="2"/>
<File name="POCSAGTX.h" path="POCSAGTX.h" type="1"/>
<File name="DMRDMOTX.h" path="DMRDMOTX.h" type="1"/>
<File name="CalDMR.h" path="CalDMR.h" type="1"/>
<File name="IODue.cpp" path="IODue.cpp" type="1"/>
<File name="DMRTX.cpp" path="DMRTX.cpp" type="1"/>
<File name="CalRSSI.h" path="CalRSSI.h" type="1"/>
<File name="P25RX.cpp" path="P25RX.cpp" type="1"/>
<File name="STM32F4XX_Lib/CMSIS/Lib/GCC" path="" type="2"/>
<File name="STM32F4XX_Lib" path="" type="2"/>
<File name="STM32F4XX_Lib/CMSIS/Include/core_cmInstr.h" path="STM32F4XX_Lib/CMSIS/Include/core_cmInstr.h" type="1"/>
<File name="DMRTX.h" path="DMRTX.h" type="1"/>
<File name="STM32F4XX_Lib/Device/system_stm32f4xx.c" path="STM32F4XX_Lib/Device/system_stm32f4xx.c" type="1"/>
<File name="RSSIRB.h" path="RSSIRB.h" type="1"/>
<File name="STM32F4XX_Lib/Device/startup/startup_stm32f4xx.c" path="STM32F4XX_Lib/Device/startup/startup_stm32f4xx.c" type="1"/>
<File name="STM32F4XX_Lib/Device/startup" path="" type="2"/>
<File name="SerialRB.h" path="SerialRB.h" type="1"/>
<File name="NXDNDefines.h" path="NXDNDefines.h" type="1"/>
<File name="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/include/stm32f4xx_gpio.h" path="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/include/stm32f4xx_gpio.h" type="1"/>
<File name="NXDNTX.h" path="NXDNTX.h" type="1"/>
<File name="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver" path="" type="2"/>
<File name="DMRDefines.h" path="DMRDefines.h" type="1"/>
<File name="CalDMR.cpp" path="CalDMR.cpp" type="1"/>
<File name="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/include/stm32f4xx_adc.h" path="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/include/stm32f4xx_adc.h" type="1"/>
<File name="SerialSTM.cpp" path="SerialSTM.cpp" type="1"/>
<File name="STM32F4XX_Lib/CMSIS/Lib/GCC/libarm_cortexM4lf_math.a" path="STM32F4XX_Lib/CMSIS/Lib/GCC/libarm_cortexM4lf_math.a" type="1"/>
<File name="DStarDefines.h" path="DStarDefines.h" type="1"/>
<File name="DStarRX.h" path="DStarRX.h" type="1"/>
<File name="NXDNRX.h" path="NXDNRX.h" type="1"/>
<File name="Config.h" path="Config.h" type="1"/>
<File name="RingBuff.h" path="RingBuff.h" type="1"/>
<File name="DMRSlotType.cpp" path="DMRSlotType.cpp" type="1"/>
<File name="Globals.h" path="Globals.h" type="1"/>
<File name="STM32F4XX_Lib/Device" path="" type="2"/>
<File name="CalDStarRX.cpp" path="CalDStarRX.cpp" type="1"/>
<File name="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/include/stm32f4xx_tim.h" path="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/include/stm32f4xx_tim.h" type="1"/>
<File name="CalNXDN.h" path="CalNXDN.h" type="1"/>
<File name="CalDStarRX.h" path="CalDStarRX.h" type="1"/>
<File name="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/include" path="" type="2"/>
<File name="CalRSSI.cpp" path="CalRSSI.cpp" type="1"/>
<File name="IO.h" path="IO.h" type="1"/>
<File name="Utils.cpp" path="Utils.cpp" type="1"/>
<File name="STM32F4XX_Lib/CMSIS/Lib/.DS_Store" path="STM32F4XX_Lib/CMSIS/Lib/.DS_Store" type="1"/>
<File name="STM32F4XX_Lib/CMSIS/.DS_Store" path="STM32F4XX_Lib/CMSIS/.DS_Store" type="1"/>
<File name="Utils.h" path="Utils.h" type="1"/>
<File name="STM32F4XX_Lib/CMSIS/Lib" path="" type="2"/>
<File name="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/.DS_Store" path="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/.DS_Store" type="1"/>
<File name="STM32F4XX_Lib/CMSIS/Include/.DS_Store" path="STM32F4XX_Lib/CMSIS/Include/.DS_Store" type="1"/>
<File name="STM32F4XX_Lib/CMSIS/Include/arm_math.h" path="STM32F4XX_Lib/CMSIS/Include/arm_math.h" type="1"/>
<File name="YSFDefines.h" path="YSFDefines.h" type="1"/>
<File name="DStarTX.h" path="DStarTX.h" type="1"/>
<File name="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/source/stm32f4xx_rcc.c" path="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/source/stm32f4xx_rcc.c" type="1"/>
<File name="CalP25.h" path="CalP25.h" type="1"/>
<File name="STM32F4XX_Lib/Device/.DS_Store" path="STM32F4XX_Lib/Device/.DS_Store" type="1"/>
<File name="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/include/stm32f4xx_rcc.h" path="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/include/stm32f4xx_rcc.h" type="1"/>
<File name="P25Defines.h" path="P25Defines.h" type="1"/>
<File name="DMRSlotType.h" path="DMRSlotType.h" type="1"/>
<File name="Debug.h" path="Debug.h" type="1"/>
<File name="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/include/misc.h" path="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/include/misc.h" type="1"/>
<File name="P25TX.h" path="P25TX.h" type="1"/>
<File name="RSSIRB.cpp" path="RSSIRB.cpp" type="1"/>
<File name="DStarRX.cpp" path="DStarRX.cpp" type="1"/>
<File name="IOSTM.cpp" path="IOSTM.cpp" type="1"/>
<File name="DMRSlotRX.cpp" path="DMRSlotRX.cpp" type="1"/>
<File name="P25TX.cpp" path="P25TX.cpp" type="1"/>
<File name="SerialRB.cpp" path="SerialRB.cpp" type="1"/>
<File name="CWIdTX.cpp" path="CWIdTX.cpp" type="1"/>
<File name="DMRIdleRX.cpp" path="DMRIdleRX.cpp" type="1"/>
<File name="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/include/stm32f4xx_usart.h" path="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/include/stm32f4xx_usart.h" type="1"/>
<File name="STM32Utils.h" path="STM32Utils.h" type="1"/>
<File name="STM32F4XX_Lib/.DS_Store" path="STM32F4XX_Lib/.DS_Store" type="1"/>
<File name="YSFTX.cpp" path="YSFTX.cpp" type="1"/>
<File name="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/source/stm32f4xx_gpio.c" path="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/source/stm32f4xx_gpio.c" type="1"/>
</Files>
<Bookmarks/>
</Project>
Binary file not shown.
+78 -27
View File
@@ -25,6 +25,7 @@ F7_LIB_PATH=./STM32F7XX_Lib
# MCU external clock frequency (Hz) # MCU external clock frequency (Hz)
CLK_MMDVM_PI=12000000 CLK_MMDVM_PI=12000000
CLK_NUCLEO=8000000 CLK_NUCLEO=8000000
CLK_12MHZ=12000000
# Directory Structure # Directory Structure
BINDIR=bin BINDIR=bin
@@ -93,6 +94,8 @@ ifndef $(OSC)
OSC=$(CLK_MMDVM_PI) OSC=$(CLK_MMDVM_PI)
else ifeq ($(MAKECMDGOALS),pi-f722) else ifeq ($(MAKECMDGOALS),pi-f722)
OSC=$(CLK_MMDVM_PI) OSC=$(CLK_MMDVM_PI)
else ifeq ($(MAKECMDGOALS),drcc_nqf)
OSC=$(CLK_12MHZ)
else else
OSC=$(CLK_NUCLEO) OSC=$(CLK_NUCLEO)
endif endif
@@ -128,16 +131,27 @@ DEFS_NUCLEO_F767=-DUSE_HAL_DRIVER -DSTM32F767xx -DSTM32F7XX -DSTM32F7_NUCLEO -DH
DEFS_PI_F722=-DUSE_HAL_DRIVER -DSTM32F722xx -DSTM32F7XX -DSTM32F722_PI -DHSE_VALUE=$(OSC) -DMADEBYMAKEFILE DEFS_PI_F722=-DUSE_HAL_DRIVER -DSTM32F722xx -DSTM32F7XX -DSTM32F722_PI -DHSE_VALUE=$(OSC) -DMADEBYMAKEFILE
# MMDVM-F7M F0DEI board: # MMDVM-F7M F0DEI board:
DEFS_F7M=-DUSE_HAL_DRIVER -DSTM32F722xx -DSTM32F7XX -DSTM32F722_F7M -DHSE_VALUE=$(OSC) -DMADEBYMAKEFILE DEFS_F7M=-DUSE_HAL_DRIVER -DSTM32F722xx -DSTM32F7XX -DSTM32F722_F7M -DHSE_VALUE=$(OSC) -DMADEBYMAKEFILE
# MMDVM-F7-Hat F0DEI, DB9MAT, DF2ET board: # MMDVM_RPT_Hat F0DEI, DB9MAT, DF2ET board:
DEFS_F7HAT=-DUSE_HAL_DRIVER -DSTM32F722xx -DSTM32F7XX -DSTM32F722_F7HAT -DHSE_VALUE=$(OSC) -DMADEBYMAKEFILE DEFS_RPT_HAT=-DUSE_HAL_DRIVER -DSTM32F722xx -DSTM32F7XX -DSTM32F722_RPT_HAT -DHSE_VALUE=$(OSC) -DMADEBYMAKEFILE
# STM32F4 DVM board: # RB STM32F4_DVM board:
DEFS_DVM=-DUSE_STDPERIPH_DRIVER -DSTM32F4XX -DSTM32F446xx -DSTM32F4_DVM -DHSE_VALUE=$(OSC) -DMADEBYMAKEFILE DEFS_DVM=-DUSE_STDPERIPH_DRIVER -DSTM32F4XX -DSTM32F446xx -DSTM32F4_DVM -DHSE_VALUE=$(OSC) -DMADEBYMAKEFILE
# RB STM32F7 DVM board:
DEFS_DVM722=-DUSE_HAL_DRIVER -DSTM32F722xx -DSTM32F7XX -DSTM32F7_DVM -DHSE_VALUE=$(OSC) -DMADEBYMAKEFILE
# MMDVM_RPT_Hat BG4TGO, BG5HHP board:
DEFS_RPT_HAT_TGO=-DUSE_STDPERIPH_DRIVER -DSTM32F4XX -DSTM32F40_41xxx -DSTM32F4_RPT_HAT_TGO -DHSE_VALUE=$(OSC) -DMADEBYMAKEFILE
# DRCC_DVM BG7NQF board:
DEFS_DRCC_DVM=-DUSE_STDPERIPH_DRIVER -DSTM32F4XX -DSTM32F446xx -DDRCC_DVM -DHSE_VALUE=$(OSC) -DMADEBYMAKEFILE
# WA0EDA F405 MTR2K, MASTR3 board:
DEFS_EDA_405=-DUSE_STDPERIPH_DRIVER -DSTM32F4XX -DSTM32F40_41xxx -DSTM32F4_EDA_405 -DHSE_VALUE=$(OSC) -DMADEBYMAKEFILE
# WA0EDA F446 MTR2K, MASTR3 board:
DEFS_EDA_446=-DUSE_STDPERIPH_DRIVER -DSTM32F4XX -DSTM32F446xx -DSTM32F4_EDA_446 -DHSE_VALUE=$(OSC) -DMADEBYMAKEFILE
# Build compiler flags # Build compiler flags
CFLAGS_F4=-c $(MCFLAGS_F4) $(INCLUDES_F4) CFLAGS_F4=-c $(MCFLAGS_F4) $(INCLUDES_F4)
CXXFLAGS_F4=-c $(MCFLAGS_F4) $(INCLUDES_F4) CXXFLAGS_F4=-c $(MCFLAGS_F4) $(INCLUDES_F4) -std=c++11
CFLAGS_F7=-c $(MCFLAGS_F7) $(INCLUDES_F7) CFLAGS_F7=-c $(MCFLAGS_F7) $(INCLUDES_F7)
CXXFLAGS_F7=-c $(MCFLAGS_F7) $(INCLUDES_F7) CXXFLAGS_F7=-c $(MCFLAGS_F7) $(INCLUDES_F7) -std=c++11
# Linker flags # Linker flags
LDFLAGS_F4 =-T stm32f4xx_link.ld $(MCFLAGS_F4) --specs=nosys.specs $(INCLUDES_LIBS_F4) LDFLAGS_F4 =-T stm32f4xx_link.ld $(MCFLAGS_F4) --specs=nosys.specs $(INCLUDES_LIBS_F4)
@@ -147,10 +161,10 @@ LDFLAGS_F722 =-T stm32f722_link.ld $(MCFLAGS_F7) --specs=nosys.specs $(INCLUDES_
# Common flags # Common flags
CFLAGS=-Os -ffunction-sections -fdata-sections -fno-builtin -Wno-implicit -DCUSTOM_NEW -DNO_EXCEPTIONS CFLAGS=-Os -ffunction-sections -fdata-sections -fno-builtin -Wno-implicit -DCUSTOM_NEW -DNO_EXCEPTIONS
CXXFLAGS=-Os -fno-exceptions -ffunction-sections -fdata-sections -fno-builtin -fno-rtti -DCUSTOM_NEW -DNO_EXCEPTIONS CXXFLAGS=-Os -fno-exceptions -ffunction-sections -fdata-sections -fno-builtin -fno-rtti -DCUSTOM_NEW -DNO_EXCEPTIONS
LDFLAGS=-Os --specs=nano.specs LDFLAGS=-Os --specs=nano.specs -Wl,-Map=bin/mmdvm.map
# Build Rules # Build Rules
.PHONY: all release dis pi pi-f722 f4m nucleo f767 dvm clean .PHONY: all release dis pi pi-f722 f4m nucleo f767 dvm drcc_nqf clean
# Default target: Nucleo-64 F446RE board # Default target: Nucleo-64 F446RE board
all: nucleo all: nucleo
@@ -179,11 +193,17 @@ f7m: CXXFLAGS+=$(CXXFLAGS_F7) $(DEFS_F7M)
f7m: LDFLAGS+=$(LDFLAGS_F722) f7m: LDFLAGS+=$(LDFLAGS_F722)
f7m: release_f7 f7m: release_f7
f7hat: GitVersion.h rpt_hat: GitVersion.h
f7hat: CFLAGS+=$(CFLAGS_F7) $(DEFS_F7HAT) rpt_hat: CFLAGS+=$(CFLAGS_F7) $(DEFS_RPT_HAT)
f7hat: CXXFLAGS+=$(CXXFLAGS_F7) $(DEFS_F7HAT) rpt_hat: CXXFLAGS+=$(CXXFLAGS_F7) $(DEFS_RPT_HAT)
f7hat: LDFLAGS+=$(LDFLAGS_F722) rpt_hat: LDFLAGS+=$(LDFLAGS_F722)
f7hat: release_f7 rpt_hat: release_f7
rpt_hat_tgo: GitVersion.h
rpt_hat_tgo: CFLAGS+=$(CFLAGS_F4) $(DEFS_RPT_HAT_TGO)
rpt_hat_tgo: CXXFLAGS+=$(CXXFLAGS_F4) $(DEFS_RPT_HAT_TGO)
rpt_hat_tgo: LDFLAGS+=$(LDFLAGS_F4)
rpt_hat_tgo: release_f4
nucleo: GitVersion.h nucleo: GitVersion.h
nucleo: CFLAGS+=$(CFLAGS_F4) $(DEFS_NUCLEO) nucleo: CFLAGS+=$(CFLAGS_F4) $(DEFS_NUCLEO)
@@ -204,11 +224,41 @@ f767: LDFLAGS+=$(LDFLAGS_F767)
f767: release_f7 f767: release_f7
dvm: GitVersion.h dvm: GitVersion.h
dvm: CFLAGS+=$(CFLAGS_F4) $(DEFS_DVM) dvm: CFLAGS+=$(CFLAGS_F4) $(DEFS_DVM) -DDRCC_DVM_446
dvm: CXXFLAGS+=$(CXXFLAGS_F4) $(DEFS_DVM) dvm: CXXFLAGS+=$(CXXFLAGS_F4) $(DEFS_DVM) -DDRCC_DVM_446
dvm: LDFLAGS+=$(LDFLAGS_F4) dvm: LDFLAGS+=$(LDFLAGS_F4)
dvm: release_f4 dvm: release_f4
dvm722: GitVersion.h
dvm722: CFLAGS+=$(CFLAGS_F7) $(DEFS_DVM722) -DDRCC_DVM_722
dvm722: CXXFLAGS+=$(CXXFLAGS_F7) $(DEFS_DVM722) -DDRCC_DVM_722
dvm722: LDFLAGS+=$(LDFLAGS_F722)
dvm722: release_f7
drcc_nqf: GitVersion.h
drcc_nqf: CFLAGS+=$(CFLAGS_F4) $(DEFS_DRCC_DVM) -DDRCC_DVM_NQF
drcc_nqf: CXXFLAGS+=$(CXXFLAGS_F4) $(DEFS_DRCC_DVM) -DDRCC_DVM_NQF
drcc_nqf: LDFLAGS+=$(LDFLAGS_F4)
drcc_nqf: release_f4
hhp446: GitVersion.h
hhp446: CFLAGS+=$(CFLAGS_F4) $(DEFS_DRCC_DVM) -DDRCC_DVM_HHP446
hhp446: CXXFLAGS+=$(CXXFLAGS_F4) $(DEFS_DRCC_DVM) -DDRCC_DVM_HHP446
hhp446: LDFLAGS+=$(LDFLAGS_F4)
hhp446: release_f4
eda405: GitVersion.h
eda405: CFLAGS+=$(CFLAGS_F4) $(DEFS_EDA_405)
eda405: CXXFLAGS+=$(CXXFLAGS_F4) $(DEFS_EDA_405)
eda405: LDFLAGS+=$(LDFLAGS_F4)
eda405: release_f4
eda446: GitVersion.h
eda446: CFLAGS+=$(CFLAGS_F4) $(DEFS_EDA_446)
eda446: CXXFLAGS+=$(CXXFLAGS_F4) $(DEFS_EDA_446)
eda446: LDFLAGS+=$(LDFLAGS_F4)
eda446: release_f4
release_f4: $(BINDIR) release_f4: $(BINDIR)
release_f4: $(OBJDIR_F4) release_f4: $(OBJDIR_F4)
release_f4: $(BINDIR)/$(BINHEX_F4) release_f4: $(BINDIR)/$(BINHEX_F4)
@@ -231,7 +281,7 @@ $(OBJDIR_F7):
$(BINDIR)/$(BINHEX_F4): $(BINDIR)/$(BINELF_F4) $(BINDIR)/$(BINHEX_F4): $(BINDIR)/$(BINELF_F4)
$(CP) -O ihex $< $@ $(CP) -O ihex $< $@
@echo "Objcopy from ELF to IHEX complete!\n" @echo "Objcopy from ELF to IHEX complete!\n"
$(BINDIR)/$(BINBIN_F4): $(BINDIR)/$(BINELF_F4) $(BINDIR)/$(BINBIN_F4): $(BINDIR)/$(BINELF_F4)
$(CP) -O binary $< $@ $(CP) -O binary $< $@
@echo "Objcopy from ELF to BINARY complete!\n" @echo "Objcopy from ELF to BINARY complete!\n"
@@ -244,7 +294,7 @@ $(BINDIR)/$(BINELF_F4): $(OBJ_F4)
$(BINDIR)/$(BINHEX_F7): $(BINDIR)/$(BINELF_F7) $(BINDIR)/$(BINHEX_F7): $(BINDIR)/$(BINELF_F7)
$(CP) -O ihex $< $@ $(CP) -O ihex $< $@
@echo "Objcopy from ELF to IHEX complete!\n" @echo "Objcopy from ELF to IHEX complete!\n"
$(BINDIR)/$(BINBIN_F7): $(BINDIR)/$(BINELF_F7) $(BINDIR)/$(BINBIN_F7): $(BINDIR)/$(BINELF_F7)
$(CP) -O binary $< $@ $(CP) -O binary $< $@
@echo "Objcopy from ELF to BINARY complete!\n" @echo "Objcopy from ELF to BINARY complete!\n"
@@ -318,34 +368,31 @@ endif
deploy-pi: deploy-pi:
ifneq ($(wildcard /usr/local/bin/stm32flash),) ifneq ($(wildcard /usr/local/bin/stm32flash),)
-/usr/local/bin/stm32flash -i 20,-21,21:-20,21 /dev/ttyAMA0 -/usr/local/bin/stm32flash -i 20,-21,21:-20,21 /dev/ttyAMA0
-/usr/local/bin/stm32ld /dev/ttyAMA0 57600 bin/$(BINBIN_F4) /usr/local/bin/stm32flash -v -w bin/$(BINBIN_F4) -g 0x0 -R /dev/ttyAMA0
/usr/local/bin/stm32flash -v -w bin/$(BINBIN_F4) -g 0x0 -R -c /dev/ttyAMA0
endif endif
ifneq ($(wildcard /usr/bin/stm32flash),) ifneq ($(wildcard /usr/bin/stm32flash),)
-/usr/bin/stm32flash -i 20,-21,21:-20,21 /dev/ttyAMA0 -/usr/bin/stm32flash -i 20,-21,21:-20,21 /dev/ttyAMA0
-/usr/bin/stm32ld /dev/ttyAMA0 57600 bin/$(BINBIN_F4) /usr/bin/stm32flash -v -w bin/$(BINBIN_F4) -g 0x0 -R /dev/ttyAMA0
/usr/bin/stm32flash -v -w bin/$(BINBIN_F4) -g 0x0 -R -c /dev/ttyAMA0
endif endif
deploy-f4m: deploy-pi deploy-f4m: deploy-pi
deploy-dvm: deploy-pi deploy-dvm: deploy-pi
deploy-eda405: deploy-pi
deploy-eda446: deploy-pi
deploy-pi-f7: deploy-pi-f7:
ifneq ($(wildcard /usr/local/bin/stm32flash),) ifneq ($(wildcard /usr/local/bin/stm32flash),)
-/usr/local/bin/stm32flash -i 20,-21,21:-20,21 /dev/ttyAMA0 -/usr/local/bin/stm32flash -i 20,-21,21:-20,21 /dev/ttyAMA0
-/usr/local/bin/stm32ld /dev/ttyAMA0 57600 bin/$(BINBIN_F7) /usr/local/bin/stm32flash -v -w bin/$(BINBIN_F7) -g 0x0 -R /dev/ttyAMA0
/usr/local/bin/stm32flash -v -w bin/$(BINBIN_F7) -g 0x0 -R -c /dev/ttyAMA0
endif
ifneq ($(wildcard /usr/bin/stm32flash),) else ifneq ($(wildcard /usr/bin/stm32flash),)
-/usr/bin/stm32flash -i 20,-21,21:-20,21 /dev/ttyAMA0 -/usr/bin/stm32flash -i 20,-21,21:-20,21 /dev/ttyAMA0
-/usr/bin/stm32ld /dev/ttyAMA0 57600 bin/$(BINBIN_F7) /usr/bin/stm32flash -v -w bin/$(BINBIN_F7) -g 0x0 -R /dev/ttyAMA0
/usr/bin/stm32flash -v -w bin/$(BINBIN_F7) -g 0x0 -R -c /dev/ttyAMA0
endif endif
deploy-f7m: deploy-pi-f7 deploy-f7m: deploy-pi-f7
deploy-f7hat: deploy-pi-f7 deploy-rpt_hat: deploy-pi-f7
# Export the current git version if the index file exists, else 000... # Export the current git version if the index file exists, else 000...
GitVersion.h: GitVersion.h:
@@ -360,3 +407,7 @@ else
echo "#define GITVERSION \"0000000\"" > $@ echo "#define GITVERSION \"0000000\"" > $@
endif endif
endif endif
flash_f4:
@echo "flashing firmware..."
st-flash write bin/$(BINBIN_F4) 0x8000000
+2 -2
View File
@@ -1,5 +1,5 @@
#!/usr/bin/make #!/usr/bin/make
# makefile for the arduino due (works with arduino IDE 1.6.11) # makefile for the arduino due (works with arduino IDE 1.6.12)
# #
# The original file can be found at https://github.com/pauldreik/arduino-due-makefile # The original file can be found at https://github.com/pauldreik/arduino-due-makefile
# #
@@ -34,7 +34,7 @@ OBJCOPY:=$(ADIR)/packages/arduino/tools/arm-none-eabi-gcc/4.8.3-2014q1/bin/arm-n
C:=$(CC) C:=$(CC)
#SAM:=arduino/sam/ #SAM:=arduino/sam/
SAM:=$(ADIR)/packages/arduino/hardware/sam/1.6.11 SAM:=$(ADIR)/packages/arduino/hardware/sam/1.6.12
#CMSIS:=arduino/sam/system/CMSIS/ #CMSIS:=arduino/sam/system/CMSIS/
#LIBSAM:=arduino/sam/system/libsam #LIBSAM:=arduino/sam/system/libsam
TMPDIR:=$(PWD)/build TMPDIR:=$(PWD)/build
-151
View File
@@ -1,151 +0,0 @@
# The name for the project
TARGET:=mmdvm
# The CPU architecture (will be used for -mcpu)
MCPU:=cortex-m3
MCU:=STM32F105xC
# The source files of the project
CSRC:=
CXXSRC:=$(wildcard *.cpp)
# Include directory for the system include files and system source file
SYSDIR:=system_stm32f1xx
SYSSRC:=$(SYSDIR)/system_stm32f1xx.c
# Other include directories
INCDIR:=
# Definitions
CDEFS:=
CXXDEFS:=
# The name of the startup file which matches to the architecture (MCPU)
STARTUP:=$(SYSDIR)/startup_stm32f105xc.S
STARTUP_DEFS=
# Include directory for CMSIS
CMSISDIR:=/opt/STM32Cube_FW_F1_V1.4.0/Drivers/CMSIS
# Libraries
LIBDIR:=
LIBS:=-larm_cortexM3l_math
# Name of the linker script
LDSCRIPT:=$(SYSDIR)/gcc.ld
# Target objects and binaries directory
OBJDIR:=obj
BINDIR:=bin
# Port definition for programming via bootloader (using stm32flash)
BL_PORT:=ttyUSB0
# Internal Variables
ELF:=$(BINDIR)/$(TARGET).elf
HEX:=$(BINDIR)/$(TARGET).hex
DIS:=$(BINDIR)/$(TARGET).dis
MAP:=$(BINDIR)/$(TARGET).map
OBJ:=$(CSRC:%.c=$(OBJDIR)/%.o) $(CXXSRC:%.cpp=$(OBJDIR)/%.o)
OBJ+=$(SYSSRC:$(SYSDIR)/%.c=$(OBJDIR)/%.o) $(STARTUP:$(SYSDIR)/%.S=$(OBJDIR)/%.o)
# Replace standard build tools by arm tools
CC:=arm-none-eabi-gcc
CXX:=arm-none-eabi-g++
AS:=arm-none-eabi-gcc
LD:=arm-none-eabi-g++
OBJCOPY:=arm-none-eabi-objcopy
OBJDUMP:=arm-none-eabi-objdump
SIZE:=arm-none-eabi-size
# Common flags
COMMON_FLAGS =-mthumb -mlittle-endian -mcpu=$(MCPU)
COMMON_FLAGS+= -Wall
COMMON_FLAGS+= -I. -I$(CMSISDIR)/Include -I$(CMSISDIR)/Device/ST/STM32F1xx/Include -I$(SYSDIR)
COMMON_FLAGS+= $(addprefix -I,$(INCDIR))
COMMON_FLAGS+= -D$(MCU)
COMMON_FLAGS+= -Os -flto -ffunction-sections -fdata-sections
COMMON_FLAGS+= -g
# Assembler flags
ASFLAGS:=$(COMMON_FLAGS)
# C flags
CFLAGS:=$(COMMON_FLAGS) $(addprefix -D,$(CDEFS))
CFLAGS+= -std=gnu11 -nostdlib
# CXX flags
CXXFLAGS:=$(COMMON_FLAGS) $(addprefix -D,$(CXXDEFS))
CXXFLAGS+= -nostdlib -fno-exceptions -fno-rtti
# LD flags
LDFLAGS:=$(COMMON_FLAGS) -Wl,--gc-sections -Wl,-Map=$(MAP) -Wl,--no-wchar-size-warning
LDFLAGS+= --specs=nosys.specs --specs=nano.specs
LDFLAGS+= -L$(CMSISDIR)/Lib/GCC/ $(addprefix -L,$(LIBDIR))
LDLIBS:=-T$(LDSCRIPT) $(LIBS)
# Dependecies
DEPENDS:=$(CSRC:%.c=$(OBJDIR)/%.d) $(CXXSRC:%.cpp=$(OBJDIR)/%.d)
# Additional Suffixes
.SUFFIXES: .elf .hex
# Targets
.PHONY: all
all: $(DIS) $(HEX)
$(SIZE) $(ELF)
.PHONY: program
program: $(HEX) $(ELF)
openocd -f openocd.cfg \
-c "program $(HEX) verify reset exit"
$(SIZE) $(ELF)
.PHONY: program_bl
program_bl: $(HEX) $(ELF)
stm32flash -w $(HEX) -v /dev/$(BL_PORT)
$(SIZE) $(ELF)
.PHONY: run
run: $(HEX) $(ELF)
openocd -f openocd.cfg \
-c "init" -c "reset" -c "exit"
.PHONY: debug
debug: $(ELF)
./debug.sh $(ELF)
.PHONY: clean
clean:
$(RM) $(OBJ) $(HEX) $(ELF) $(DIS) $(MAP) $(DEPENDS)
# implicit rules
.elf.hex:
$(OBJCOPY) -O ihex $< $@
$(OBJDIR)/%.o: %.c
$(CC) -MMD $(CFLAGS) -c $< -o $@
$(OBJDIR)/%.o: %.cpp
$(CXX) -MMD $(CXXFLAGS) -c $< -o $@
$(OBJDIR)/%.o: $(SYSDIR)/%.c
$(CC) $(CFLAGS) -c $< -o $@
$(OBJDIR)/%.o: $(SYSDIR)/%.S
$(AS) $(ASFLAGS) -c $< -o $@
# explicit rules
$(OBJDIR):
mkdir -p $(OBJDIR)
$(BINDIR):
mkdir -p $(BINDIR)
$(ELF): $(OBJDIR) $(BINDIR) $(OBJ)
$(LD) $(OBJ) $(LDFLAGS) $(LDLIBS) -o $@
$(DIS): $(ELF)
$(OBJDUMP) -S $< > $@
# include dependecies
-include $(DEPENDS)
+1 -1
View File
@@ -19,7 +19,7 @@
#if !defined(NXDNDEFINES_H) #if !defined(NXDNDEFINES_H)
#define NXDNDEFINES_H #define NXDNDEFINES_H
const unsigned int NXDN_RADIO_SYMBOL_LENGTH = 20U; // At 48 kHz sample rate const unsigned int NXDN_RADIO_SYMBOL_LENGTH = 10U; // At 24 kHz sample rate
const unsigned int NXDN_FRAME_LENGTH_BITS = 384U; const unsigned int NXDN_FRAME_LENGTH_BITS = 384U;
const unsigned int NXDN_FRAME_LENGTH_BYTES = NXDN_FRAME_LENGTH_BITS / 8U; const unsigned int NXDN_FRAME_LENGTH_BYTES = NXDN_FRAME_LENGTH_BITS / 8U;
+6 -1
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2009-2018 by Jonathan Naylor G4KLX * Copyright (C) 2009-2018,2020 by Jonathan Naylor G4KLX
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
@@ -17,6 +17,9 @@
*/ */
#include "Config.h" #include "Config.h"
#if defined(MODE_NXDN)
#include "Globals.h" #include "Globals.h"
#include "NXDNRX.h" #include "NXDNRX.h"
#include "Utils.h" #include "Utils.h"
@@ -403,3 +406,5 @@ void CNXDNRX::writeRSSIData(uint8_t* data)
m_rssiCount = 0U; m_rssiCount = 0U;
} }
#endif
+7 -2
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2015,2016,2017,2018 by Jonathan Naylor G4KLX * Copyright (C) 2015,2016,2017,2018,2020 by Jonathan Naylor G4KLX
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
@@ -16,10 +16,13 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/ */
#include "Config.h"
#if defined(MODE_NXDN)
#if !defined(NXDNRX_H) #if !defined(NXDNRX_H)
#define NXDNRX_H #define NXDNRX_H
#include "Config.h"
#include "NXDNDefines.h" #include "NXDNDefines.h"
enum NXDNRX_STATE { enum NXDNRX_STATE {
@@ -67,3 +70,5 @@ private:
#endif #endif
#endif
+68 -22
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2009-2018 by Jonathan Naylor G4KLX * Copyright (C) 2009-2018,2020 by Jonathan Naylor G4KLX
* Copyright (C) 2017 by Andy Uribe CA6JAU * Copyright (C) 2017 by Andy Uribe CA6JAU
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
@@ -18,26 +18,27 @@
*/ */
#include "Config.h" #include "Config.h"
#if defined(MODE_NXDN)
#include "Globals.h" #include "Globals.h"
#include "NXDNTX.h" #include "NXDNTX.h"
#include "NXDNDefines.h" #include "NXDNDefines.h"
// NXDN RRC filter + SINC filter // Generated using rcosdesign(0.2, 8, 10, 'sqrt') in MATLAB
static q15_t RRC_0_2_FILTER[] = {51, 71, 92, 112, 129, 141, 144, 138, 120, 87, 39, -26, -107, -204, -314, -437, -567, -702, -835, static q15_t RRC_0_2_FILTER[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 850, 592, 219, -234, -720, -1179, -1548, -1769, -1795, -1597, -1172,
-932,-1066, -1176, -1257, -1304, -1314, -1284, -1213, -1099, -944, -749, -519, -257, 30, 335, 651, -544, 237, 1092, 1927, 2637, 3120, 3286, 3073, 2454, 1447, 116, -1431, -3043, -4544, -5739, -6442,
968, 1277, 1569, 1832, 2058, 2237, 2360, 2420, 2412, 2329, 2170, 1935, 1623, 1239, 790, 283, -271, -6483, -5735, -4121, -1633, 1669, 5651, 10118, 14822, 19484, 23810, 27520, 30367, 32156, 32767,
-858, -1466, -2076, -2671, -3233, -3742, -4178, -4521, -4754, -4857, -4815, -4614, -4242, -3690, 32156, 30367, 27520, 23810, 19484, 14822, 10118, 5651, 1669, -1633, -4121, -5735, -6483, -6442,
-2952, -2025, -912, 385, 1855, 3488, 5266, 7172, 9183, 11274, 13418, 15585, 17746, 19869, 21923, -5739, -4544, -3043, -1431, 116, 1447, 2454, 3073, 3286, 3120, 2637, 1927, 1092, 237, -544, -1172,
23876, 25700, 27364, 28844, 30116, 31159, 31956, 32495, 32767, 32767, 32495, 31956, 31159, 30116, -1597, -1795, -1769, -1548, -1179, -720, -234, 219, 592, 850}; // numTaps = 90, L = 10
28844, 27364, 25700, 23876, 21923, 19869, 17746, 15585, 13418, 11274, 9183, 7172, 5266, 3488, 1855,
385, -912, -2025, -2952, -3690, -4242, -4614, -4815, -4857, -4754, -4521, -4178, -3742, -3233, -2671,
-2076, -1466, -858, -271, 283, 790, 1239, 1623, 1935, 2170, 2329, 2412, 2420, 2360, 2237, 2058, 1832,
1569, 1277, 968, 651, 335, 30, -257, -519, -749, -944, -1099, -1213, -1284, -1314, -1304, -1257,
-1176, -1066, -932, -835, -702, -567, -437, -314, -204, -107, -26, 39, 87, 120, 138, 144, 141, 129,
112, 92, 71, 51}; // numTaps = 180, L = 20
const uint16_t RRC_0_2_FILTER_PHASE_LEN = 9U; // phaseLength = numTaps/L const uint16_t RRC_0_2_FILTER_PHASE_LEN = 9U; // phaseLength = numTaps/L
static q15_t NXDN_SINC_FILTER[] = {572, -1003, -253, 254, 740, 1290, 1902, 2527, 3090, 3517, 3747, 3747, 3517, 3090, 2527, 1902,
1290, 740, 254, -253, -1003, 572};
const uint16_t NXDN_SINC_FILTER_LEN = 22U;
const q15_t NXDN_LEVELA = 735; const q15_t NXDN_LEVELA = 735;
const q15_t NXDN_LEVELB = 245; const q15_t NXDN_LEVELB = 245;
const q15_t NXDN_LEVELC = -245; const q15_t NXDN_LEVELC = -245;
@@ -49,26 +50,32 @@ const uint8_t NXDN_SYNC = 0x5FU;
CNXDNTX::CNXDNTX() : CNXDNTX::CNXDNTX() :
m_buffer(TX_BUFFER_LEN), m_buffer(TX_BUFFER_LEN),
m_modFilter(), m_modFilter(),
m_sincFilter(),
m_modState(), m_modState(),
m_sincState(),
m_poBuffer(), m_poBuffer(),
m_poLen(0U), m_poLen(0U),
m_poPtr(0U), m_poPtr(0U),
m_txDelay(240U) // 200ms m_txDelay(240U), // 200ms
m_txHang(3000U), // 5s
m_txCount(0U)
{ {
::memset(m_modState, 0x00U, 16U * sizeof(q15_t)); ::memset(m_modState, 0x00U, 16U * sizeof(q15_t));
::memset(m_sincState, 0x00U, 70U * sizeof(q15_t));
m_modFilter.L = NXDN_RADIO_SYMBOL_LENGTH; m_modFilter.L = NXDN_RADIO_SYMBOL_LENGTH;
m_modFilter.phaseLength = RRC_0_2_FILTER_PHASE_LEN; m_modFilter.phaseLength = RRC_0_2_FILTER_PHASE_LEN;
m_modFilter.pCoeffs = RRC_0_2_FILTER; m_modFilter.pCoeffs = RRC_0_2_FILTER;
m_modFilter.pState = m_modState; m_modFilter.pState = m_modState;
m_sincFilter.numTaps = NXDN_SINC_FILTER_LEN;
m_sincFilter.pState = m_sincState;
m_sincFilter.pCoeffs = NXDN_SINC_FILTER;
} }
void CNXDNTX::process() void CNXDNTX::process()
{ {
if (m_buffer.getData() == 0U && m_poLen == 0U) if (m_poLen == 0U && m_buffer.getData() > 0U) {
return;
if (m_poLen == 0U) {
if (!m_tx) { if (!m_tx) {
for (uint16_t i = 0U; i < m_txDelay; i++) for (uint16_t i = 0U; i < m_txDelay; i++)
m_poBuffer[m_poLen++] = NXDN_SYNC; m_poBuffer[m_poLen++] = NXDN_SYNC;
@@ -77,7 +84,8 @@ void CNXDNTX::process()
m_poBuffer[m_poLen++] = NXDN_PREAMBLE[2U]; m_poBuffer[m_poLen++] = NXDN_PREAMBLE[2U];
} else { } else {
for (uint8_t i = 0U; i < NXDN_FRAME_LENGTH_BYTES; i++) { for (uint8_t i = 0U; i < NXDN_FRAME_LENGTH_BYTES; i++) {
uint8_t c = m_buffer.get(); uint8_t c = 0U;
m_buffer.get(c);
m_poBuffer[m_poLen++] = c; m_poBuffer[m_poLen++] = c;
} }
} }
@@ -93,6 +101,8 @@ void CNXDNTX::process()
writeByte(c); writeByte(c);
space -= 4U * NXDN_RADIO_SYMBOL_LENGTH; space -= 4U * NXDN_RADIO_SYMBOL_LENGTH;
if (m_duplex)
m_txCount = m_txHang;
if (m_poPtr >= m_poLen) { if (m_poPtr >= m_poLen) {
m_poPtr = 0U; m_poPtr = 0U;
@@ -100,10 +110,23 @@ void CNXDNTX::process()
return; return;
} }
} }
} else if (m_txCount > 0U) {
// Transmit silence until the hang timer has expired.
uint16_t space = io.getSpace();
while (space > (4U * NXDN_RADIO_SYMBOL_LENGTH)) {
writeSilence();
space -= 4U * NXDN_RADIO_SYMBOL_LENGTH;
m_txCount--;
if (m_txCount == 0U)
return;
}
} }
} }
uint8_t CNXDNTX::writeData(const uint8_t* data, uint8_t length) uint8_t CNXDNTX::writeData(const uint8_t* data, uint16_t length)
{ {
if (length != (NXDN_FRAME_LENGTH_BYTES + 1U)) if (length != (NXDN_FRAME_LENGTH_BYTES + 1U))
return 4U; return 4U;
@@ -121,6 +144,7 @@ uint8_t CNXDNTX::writeData(const uint8_t* data, uint8_t length)
void CNXDNTX::writeByte(uint8_t c) void CNXDNTX::writeByte(uint8_t c)
{ {
q15_t inBuffer[4U]; q15_t inBuffer[4U];
q15_t intBuffer[NXDN_RADIO_SYMBOL_LENGTH * 4U];
q15_t outBuffer[NXDN_RADIO_SYMBOL_LENGTH * 4U]; q15_t outBuffer[NXDN_RADIO_SYMBOL_LENGTH * 4U];
const uint8_t MASK = 0xC0U; const uint8_t MASK = 0xC0U;
@@ -142,7 +166,22 @@ void CNXDNTX::writeByte(uint8_t c)
} }
} }
::arm_fir_interpolate_q15(&m_modFilter, inBuffer, outBuffer, 4U); ::arm_fir_interpolate_q15(&m_modFilter, inBuffer, intBuffer, 4U);
::arm_fir_fast_q15(&m_sincFilter, intBuffer, outBuffer, NXDN_RADIO_SYMBOL_LENGTH * 4U);
io.write(STATE_NXDN, outBuffer, NXDN_RADIO_SYMBOL_LENGTH * 4U);
}
void CNXDNTX::writeSilence()
{
q15_t inBuffer[4U] = {0, 0, 0, 0};
q15_t intBuffer[NXDN_RADIO_SYMBOL_LENGTH * 4U];
q15_t outBuffer[NXDN_RADIO_SYMBOL_LENGTH * 4U];
::arm_fir_interpolate_q15(&m_modFilter, inBuffer, intBuffer, 4U);
::arm_fir_fast_q15(&m_sincFilter, intBuffer, outBuffer, NXDN_RADIO_SYMBOL_LENGTH * 4U);
io.write(STATE_NXDN, outBuffer, NXDN_RADIO_SYMBOL_LENGTH * 4U); io.write(STATE_NXDN, outBuffer, NXDN_RADIO_SYMBOL_LENGTH * 4U);
} }
@@ -160,3 +199,10 @@ uint8_t CNXDNTX::getSpace() const
return m_buffer.getSpace() / NXDN_FRAME_LENGTH_BYTES; return m_buffer.getSpace() / NXDN_FRAME_LENGTH_BYTES;
} }
void CNXDNTX::setParams(uint8_t txHang)
{
m_txHang = txHang * 600U;
}
#endif
+17 -6
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2015,2016,2017,2018 by Jonathan Naylor G4KLX * Copyright (C) 2015,2016,2017,2018,2020 by Jonathan Naylor G4KLX
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
@@ -16,18 +16,20 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/ */
#include "Config.h"
#if defined(MODE_NXDN)
#if !defined(NXDNTX_H) #if !defined(NXDNTX_H)
#define NXDNTX_H #define NXDNTX_H
#include "Config.h" #include "RingBuffer.h"
#include "SerialRB.h"
class CNXDNTX { class CNXDNTX {
public: public:
CNXDNTX(); CNXDNTX();
uint8_t writeData(const uint8_t* data, uint8_t length); uint8_t writeData(const uint8_t* data, uint16_t length);
void process(); void process();
@@ -35,17 +37,26 @@ public:
uint8_t getSpace() const; uint8_t getSpace() const;
void setParams(uint8_t txHang);
private: private:
CSerialRB m_buffer; CRingBuffer<uint8_t> m_buffer;
arm_fir_interpolate_instance_q15 m_modFilter; arm_fir_interpolate_instance_q15 m_modFilter;
arm_fir_instance_q15 m_sincFilter;
q15_t m_modState[16U]; // blockSize + phaseLength - 1, 4 + 9 - 1 plus some spare q15_t m_modState[16U]; // blockSize + phaseLength - 1, 4 + 9 - 1 plus some spare
q15_t m_sincState[70U]; // NoTaps + BlockSize - 1, 22 + 40 - 1 plus some spare
uint8_t m_poBuffer[1200U]; uint8_t m_poBuffer[1200U];
uint16_t m_poLen; uint16_t m_poLen;
uint16_t m_poPtr; uint16_t m_poPtr;
uint16_t m_txDelay; uint16_t m_txDelay;
uint32_t m_txHang;
uint32_t m_txCount;
void writeByte(uint8_t c); void writeByte(uint8_t c);
void writeSilence();
}; };
#endif #endif
#endif
+6 -1
View File
@@ -20,7 +20,7 @@
#if !defined(P25DEFINES_H) #if !defined(P25DEFINES_H)
#define P25DEFINES_H #define P25DEFINES_H
const unsigned int P25_RADIO_SYMBOL_LENGTH = 10U; // At 48 kHz sample rate const unsigned int P25_RADIO_SYMBOL_LENGTH = 5U; // At 24 kHz sample rate
const unsigned int P25_HDR_FRAME_LENGTH_BYTES = 99U; const unsigned int P25_HDR_FRAME_LENGTH_BYTES = 99U;
const unsigned int P25_HDR_FRAME_LENGTH_BITS = P25_HDR_FRAME_LENGTH_BYTES * 8U; const unsigned int P25_HDR_FRAME_LENGTH_BITS = P25_HDR_FRAME_LENGTH_BYTES * 8U;
@@ -47,6 +47,11 @@ const unsigned int P25_TSDU_FRAME_LENGTH_BITS = P25_TSDU_FRAME_LENGTH_BYTES
const unsigned int P25_TSDU_FRAME_LENGTH_SYMBOLS = P25_TSDU_FRAME_LENGTH_BYTES * 4U; const unsigned int P25_TSDU_FRAME_LENGTH_SYMBOLS = P25_TSDU_FRAME_LENGTH_BYTES * 4U;
const unsigned int P25_TSDU_FRAME_LENGTH_SAMPLES = P25_TSDU_FRAME_LENGTH_SYMBOLS * P25_RADIO_SYMBOL_LENGTH; const unsigned int P25_TSDU_FRAME_LENGTH_SAMPLES = P25_TSDU_FRAME_LENGTH_SYMBOLS * P25_RADIO_SYMBOL_LENGTH;
const unsigned int P25_PDU_HDR_FRAME_LENGTH_BYTES = 45U;
const unsigned int P25_PDU_HDR_FRAME_LENGTH_BITS = P25_PDU_HDR_FRAME_LENGTH_BYTES * 8U;
const unsigned int P25_PDU_HDR_FRAME_LENGTH_SYMBOLS = P25_PDU_HDR_FRAME_LENGTH_BYTES * 4U;
const unsigned int P25_PDU_HDR_FRAME_LENGTH_SAMPLES = P25_PDU_HDR_FRAME_LENGTH_SYMBOLS * P25_RADIO_SYMBOL_LENGTH;
const unsigned int P25_SYNC_LENGTH_BYTES = 6U; const unsigned int P25_SYNC_LENGTH_BYTES = 6U;
const unsigned int P25_SYNC_LENGTH_BITS = P25_SYNC_LENGTH_BYTES * 8U; const unsigned int P25_SYNC_LENGTH_BITS = P25_SYNC_LENGTH_BYTES * 8U;
const unsigned int P25_SYNC_LENGTH_SYMBOLS = P25_SYNC_LENGTH_BYTES * 4U; const unsigned int P25_SYNC_LENGTH_SYMBOLS = P25_SYNC_LENGTH_BYTES * 4U;
+20 -2
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2009-2017 by Jonathan Naylor G4KLX * Copyright (C) 2009-2017,2020 by Jonathan Naylor G4KLX
* Copyright (C) 2018 by Bryan Biedenkapp <gatekeep@gmail.com> * Copyright (C) 2018 by Bryan Biedenkapp <gatekeep@gmail.com>
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
@@ -18,6 +18,9 @@
*/ */
#include "Config.h" #include "Config.h"
#if defined(MODE_P25)
#include "Globals.h" #include "Globals.h"
#include "P25RX.h" #include "P25RX.h"
#include "Utils.h" #include "Utils.h"
@@ -199,7 +202,19 @@ void CP25RX::processHdr(q15_t sample)
serial.writeP25Hdr(frame, P25_HDR_FRAME_LENGTH_BYTES + 1U); serial.writeP25Hdr(frame, P25_HDR_FRAME_LENGTH_BYTES + 1U);
} }
break; break;
case P25_DUID_TSDU: { case P25_DUID_PDU: {
calculateLevels(m_hdrSyncPtr, P25_PDU_HDR_FRAME_LENGTH_SYMBOLS);
DEBUG4("P25RX: sync found in PDU pos/centre/threshold", m_hdrSyncPtr, m_centreVal, m_thresholdVal);
uint8_t frame[P25_PDU_HDR_FRAME_LENGTH_BYTES + 1U];
samplesToBits(m_hdrSyncPtr, P25_PDU_HDR_FRAME_LENGTH_SYMBOLS, frame, 8U, m_centreVal, m_thresholdVal);
frame[0U] = 0x01U;
serial.writeP25Hdr(frame, P25_PDU_HDR_FRAME_LENGTH_BYTES + 1U);
}
break;
case P25_DUID_TSDU: {
calculateLevels(m_hdrStartPtr, P25_TSDU_FRAME_LENGTH_SYMBOLS); calculateLevels(m_hdrStartPtr, P25_TSDU_FRAME_LENGTH_SYMBOLS);
DEBUG4("P25RX: sync found in TSDU pos/centre/threshold", m_hdrSyncPtr, m_centreVal, m_thresholdVal); DEBUG4("P25RX: sync found in TSDU pos/centre/threshold", m_hdrSyncPtr, m_centreVal, m_thresholdVal);
@@ -523,3 +538,6 @@ void CP25RX::writeRSSILdu(uint8_t* ldu)
m_rssiAccum = 0U; m_rssiAccum = 0U;
m_rssiCount = 0U; m_rssiCount = 0U;
} }
#endif
+8 -2
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2015,2016,2017 by Jonathan Naylor G4KLX * Copyright (C) 2015,2016,2017,2020 by Jonathan Naylor G4KLX
* Copyright (C) 2018 by Bryan Biedenkapp <gatekeep@gmail.com> * Copyright (C) 2018 by Bryan Biedenkapp <gatekeep@gmail.com>
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
@@ -17,10 +17,13 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/ */
#include "Config.h"
#if defined(MODE_P25)
#if !defined(P25RX_H) #if !defined(P25RX_H)
#define P25RX_H #define P25RX_H
#include "Config.h"
#include "P25Defines.h" #include "P25Defines.h"
enum P25RX_STATE { enum P25RX_STATE {
@@ -72,3 +75,6 @@ private:
}; };
#endif #endif
#endif
+59 -25
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2016,2017 by Jonathan Naylor G4KLX * Copyright (C) 2016,2017,2020 by Jonathan Naylor G4KLX
* Copyright (C) 2017 by Andy Uribe CA6JAU * Copyright (C) 2017 by Andy Uribe CA6JAU
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
@@ -18,28 +18,25 @@
*/ */
#include "Config.h" #include "Config.h"
#if defined(MODE_P25)
#include "Globals.h" #include "Globals.h"
#include "P25TX.h" #include "P25TX.h"
#include "P25Defines.h" #include "P25Defines.h"
// Generated using rcosdesign(0.2, 8, 10, 'normal') in MATLAB // Generated using rcosdesign(0.2, 8, 5, 'normal') in MATLAB
static q15_t RC_0_2_FILTER[] = {-444, -897, -1311, -1636, -1825, -1840, -1659, -1278, -712, 0, // numTaps = 40, L = 5
800, 1613, 2354, 2936, 3277, 3310, 2994, 2315, 1296, 0, -1478, static q15_t RC_0_2_FILTER[] = {-897, -1636, -1840, -1278, 0, 1613, 2936, 3310, 2315, 0, -3011, -5627, -6580, -4839,
-3011, -4448, -5627, -6386, -6580, -6090, -4839, -2800, 0, 3474, 0, 7482, 16311, 24651, 30607, 32767, 30607, 24651, 16311, 7482, 0, -4839, -6580, -5627,
7482, 11835, 16311, 20666, 24651, 28032, 30607, 32219, 32767, -3011, 0, 2315, 3310, 2936, 1613, 0, -1278, -1840, -1636, -897, 0}; // numTaps = 40, L = 5
32219, 30607, 28032, 24651, 20666, 16311, 11835, 7482, 3474, 0,
-2800, -4839, -6090, -6580, -6386, -5627, -4448, -3011, -1478,
0, 1296, 2315, 2994, 3310, 3277, 2936, 2354, 1613, 800, 0, -712,
-1278, -1659, -1840, -1825, -1636, -1311, -897, -444, 0}; // numTaps = 80, L = 10
const uint16_t RC_0_2_FILTER_PHASE_LEN = 8U; // phaseLength = numTaps/L const uint16_t RC_0_2_FILTER_PHASE_LEN = 8U; // phaseLength = numTaps/L
// Generated in MATLAB using the following commands, and then normalised for unity gain static q15_t LOWPASS_FILTER[] = {124, -188, -682, 1262, 556, -621, -1912, -911, 2058, 3855, 1234, -4592, -7692, -2799,
// shape2 = 'Inverse-sinc Lowpass'; 8556, 18133, 18133, 8556, -2799, -7692, -4592, 1234, 3855, 2058, -911, -1912, -621,
// d2 = fdesign.interpolator(1, shape2); 556, 1262, -682, -188, 124};
// h2 = design(d2, 'SystemObject', true); const uint16_t LOWPASS_FILTER_LEN = 32U;
static q15_t LOWPASS_FILTER[] = {1294, -2251, 4312, -8402, 20999, 20999, -8402, 4312, -2251, 1294};
const uint16_t LOWPASS_FILTER_LEN = 10U;
const q15_t P25_LEVELA = 1260; const q15_t P25_LEVELA = 1260;
const q15_t P25_LEVELB = 420; const q15_t P25_LEVELB = 420;
@@ -57,7 +54,9 @@ m_lpState(),
m_poBuffer(), m_poBuffer(),
m_poLen(0U), m_poLen(0U),
m_poPtr(0U), m_poPtr(0U),
m_txDelay(240U) // 200ms m_txDelay(240U), // 200ms
m_txHang(6000U), // 5s
m_txCount(0U)
{ {
::memset(m_modState, 0x00U, 16U * sizeof(q15_t)); ::memset(m_modState, 0x00U, 16U * sizeof(q15_t));
::memset(m_lpState, 0x00U, 60U * sizeof(q15_t)); ::memset(m_lpState, 0x00U, 60U * sizeof(q15_t));
@@ -74,17 +73,16 @@ m_txDelay(240U) // 200ms
void CP25TX::process() void CP25TX::process()
{ {
if (m_buffer.getData() == 0U && m_poLen == 0U) if (m_poLen == 0U && m_buffer.getData() > 0U) {
return;
if (m_poLen == 0U) {
if (!m_tx) { if (!m_tx) {
for (uint16_t i = 0U; i < m_txDelay; i++) for (uint16_t i = 0U; i < m_txDelay; i++)
m_poBuffer[m_poLen++] = P25_START_SYNC; m_poBuffer[m_poLen++] = P25_START_SYNC;
} else { } else {
uint8_t length = m_buffer.get(); uint8_t length;
m_buffer.get(length);
for (uint8_t i = 0U; i < length; i++) { for (uint8_t i = 0U; i < length; i++) {
uint8_t c = m_buffer.get(); uint8_t c = 0U;
m_buffer.get(c);
m_poBuffer[m_poLen++] = c; m_poBuffer[m_poLen++] = c;
} }
} }
@@ -100,17 +98,32 @@ void CP25TX::process()
writeByte(c); writeByte(c);
space -= 4U * P25_RADIO_SYMBOL_LENGTH; space -= 4U * P25_RADIO_SYMBOL_LENGTH;
if (m_duplex)
m_txCount = m_txHang;
if (m_poPtr >= m_poLen) { if (m_poPtr >= m_poLen) {
m_poPtr = 0U; m_poPtr = 0U;
m_poLen = 0U; m_poLen = 0U;
return; return;
} }
} }
} else if (m_txCount > 0U) {
// Transmit silence until the hang timer has expired.
uint16_t space = io.getSpace();
while (space > (4U * P25_RADIO_SYMBOL_LENGTH)) {
writeSilence();
space -= 4U * P25_RADIO_SYMBOL_LENGTH;
m_txCount--;
if (m_txCount == 0U)
return;
}
} }
} }
uint8_t CP25TX::writeData(const uint8_t* data, uint8_t length) uint8_t CP25TX::writeData(const uint8_t* data, uint16_t length)
{ {
if (length < (P25_TERM_FRAME_LENGTH_BYTES + 1U)) if (length < (P25_TERM_FRAME_LENGTH_BYTES + 1U))
return 4U; return 4U;
@@ -158,6 +171,19 @@ void CP25TX::writeByte(uint8_t c)
io.write(STATE_P25, outBuffer, P25_RADIO_SYMBOL_LENGTH * 4U); io.write(STATE_P25, outBuffer, P25_RADIO_SYMBOL_LENGTH * 4U);
} }
void CP25TX::writeSilence()
{
q15_t inBuffer[4U] = {0, 0, 0, 0};
q15_t intBuffer[P25_RADIO_SYMBOL_LENGTH * 4U];
q15_t outBuffer[P25_RADIO_SYMBOL_LENGTH * 4U];
::arm_fir_interpolate_q15(&m_modFilter, inBuffer, intBuffer, 4U);
::arm_fir_fast_q15(&m_lpFilter, intBuffer, outBuffer, P25_RADIO_SYMBOL_LENGTH * 4U);
io.write(STATE_P25, outBuffer, P25_RADIO_SYMBOL_LENGTH * 4U);
}
void CP25TX::setTXDelay(uint8_t delay) void CP25TX::setTXDelay(uint8_t delay)
{ {
m_txDelay = 600U + uint16_t(delay) * 12U; // 500ms + tx delay m_txDelay = 600U + uint16_t(delay) * 12U; // 500ms + tx delay
@@ -170,3 +196,11 @@ uint8_t CP25TX::getSpace() const
{ {
return m_buffer.getSpace() / P25_LDU_FRAME_LENGTH_BYTES; return m_buffer.getSpace() / P25_LDU_FRAME_LENGTH_BYTES;
} }
void CP25TX::setParams(uint8_t txHang)
{
m_txHang = txHang * 1200U;
}
#endif
+15 -6
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2016,2017 by Jonathan Naylor G4KLX * Copyright (C) 2016,2017,2020 by Jonathan Naylor G4KLX
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
@@ -16,18 +16,20 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/ */
#include "Config.h"
#if defined(MODE_P25)
#if !defined(P25TX_H) #if !defined(P25TX_H)
#define P25TX_H #define P25TX_H
#include "Config.h" #include "RingBuffer.h"
#include "SerialRB.h"
class CP25TX { class CP25TX {
public: public:
CP25TX(); CP25TX();
uint8_t writeData(const uint8_t* data, uint8_t length); uint8_t writeData(const uint8_t* data, uint16_t length);
void process(); void process();
@@ -35,8 +37,10 @@ public:
uint8_t getSpace() const; uint8_t getSpace() const;
void setParams(uint8_t txHang);
private: private:
CSerialRB m_buffer; CRingBuffer<uint8_t> m_buffer;
arm_fir_interpolate_instance_q15 m_modFilter; arm_fir_interpolate_instance_q15 m_modFilter;
arm_fir_instance_q15 m_lpFilter; arm_fir_instance_q15 m_lpFilter;
q15_t m_modState[16U]; // blockSize + phaseLength - 1, 4 + 9 - 1 plus some spare q15_t m_modState[16U]; // blockSize + phaseLength - 1, 4 + 9 - 1 plus some spare
@@ -45,9 +49,14 @@ private:
uint16_t m_poLen; uint16_t m_poLen;
uint16_t m_poPtr; uint16_t m_poPtr;
uint16_t m_txDelay; uint16_t m_txDelay;
uint32_t m_txHang;
uint32_t m_txCount;
void writeByte(uint8_t c); void writeByte(uint8_t c);
void writeSilence();
}; };
#endif #endif
#endif
+16 -10
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2009-2018 by Jonathan Naylor G4KLX * Copyright (C) 2009-2018,2020 by Jonathan Naylor G4KLX
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
@@ -17,6 +17,9 @@
*/ */
#include "Config.h" #include "Config.h"
#if defined(MODE_POCSAG)
#include "Globals.h" #include "Globals.h"
#include "POCSAGTX.h" #include "POCSAGTX.h"
@@ -24,18 +27,18 @@ const uint16_t POCSAG_FRAME_LENGTH_BYTES = 17U * sizeof(uint32_t);
const uint16_t POCSAG_PREAMBLE_LENGTH_BYTES = 18U * sizeof(uint32_t); const uint16_t POCSAG_PREAMBLE_LENGTH_BYTES = 18U * sizeof(uint32_t);
const uint16_t POCSAG_RADIO_SYMBOL_LENGTH = 40U; // at 48Khz const uint16_t POCSAG_RADIO_SYMBOL_LENGTH = 20U;
const q15_t POCSAG_LEVEL1[] = { 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700}; const q15_t POCSAG_LEVEL1[] = { 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700, 1700};
const q15_t POCSAG_LEVEL0[] = {-1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700}; const q15_t POCSAG_LEVEL0[] = {-1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700};
static q15_t SHAPING_FILTER[] = {2730, 2730, 2730, 2730, 2730, 2730, 2730, 2730, 2730, 2730, 2730, 2730}; static q15_t SHAPING_FILTER[] = {5461, 5461, 5461, 5461, 5461, 5461};
const uint16_t SHAPING_FILTER_LEN = 12U; const uint16_t SHAPING_FILTER_LEN = 6U;
const uint8_t POCSAG_SYNC = 0xAAU; const uint8_t POCSAG_SYNC = 0xAAU;
CPOCSAGTX::CPOCSAGTX() : CPOCSAGTX::CPOCSAGTX() :
m_buffer(TX_BUFFER_LEN), m_buffer(4000U),
m_modFilter(), m_modFilter(),
m_modState(), m_modState(),
m_poBuffer(), m_poBuffer(),
@@ -43,7 +46,7 @@ m_poLen(0U),
m_poPtr(0U), m_poPtr(0U),
m_txDelay(POCSAG_PREAMBLE_LENGTH_BYTES) m_txDelay(POCSAG_PREAMBLE_LENGTH_BYTES)
{ {
::memset(m_modState, 0x00U, 180U * sizeof(q15_t)); ::memset(m_modState, 0x00U, 170U * sizeof(q15_t));
m_modFilter.numTaps = SHAPING_FILTER_LEN; m_modFilter.numTaps = SHAPING_FILTER_LEN;
m_modFilter.pState = m_modState; m_modFilter.pState = m_modState;
@@ -61,7 +64,8 @@ void CPOCSAGTX::process()
m_poBuffer[m_poLen++] = POCSAG_SYNC; m_poBuffer[m_poLen++] = POCSAG_SYNC;
} else { } else {
for (uint8_t i = 0U; i < POCSAG_FRAME_LENGTH_BYTES; i++) { for (uint8_t i = 0U; i < POCSAG_FRAME_LENGTH_BYTES; i++) {
uint8_t c = m_buffer.get(); uint8_t c = 0U;
m_buffer.get(c);
m_poBuffer[m_poLen++] = c; m_poBuffer[m_poLen++] = c;
} }
} }
@@ -95,7 +99,7 @@ bool CPOCSAGTX::busy()
return false; return false;
} }
uint8_t CPOCSAGTX::writeData(const uint8_t* data, uint8_t length) uint8_t CPOCSAGTX::writeData(const uint8_t* data, uint16_t length)
{ {
if (length != POCSAG_FRAME_LENGTH_BYTES) if (length != POCSAG_FRAME_LENGTH_BYTES)
return 4U; return 4U;
@@ -147,3 +151,5 @@ uint8_t CPOCSAGTX::getSpace() const
return m_buffer.getSpace() / POCSAG_FRAME_LENGTH_BYTES; return m_buffer.getSpace() / POCSAG_FRAME_LENGTH_BYTES;
} }
#endif
+13 -9
View File
@@ -1,5 +1,5 @@
/* /*
* Copyright (C) 2015,2016,2017,2018 by Jonathan Naylor G4KLX * Copyright (C) 2015-2020 by Jonathan Naylor G4KLX
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
@@ -16,18 +16,22 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/ */
#include "Config.h"
#if defined(MODE_POCSAG)
#if !defined(POCSAGTX_H) #if !defined(POCSAGTX_H)
#define POCSAGTX_H #define POCSAGTX_H
#include "Config.h" #include "RingBuffer.h"
#include "SerialRB.h"
class CPOCSAGTX { class CPOCSAGTX {
public: public:
CPOCSAGTX(); CPOCSAGTX();
uint8_t writeData(const uint8_t* data, uint8_t length); uint8_t writeData(const uint8_t* data, uint16_t length);
void writeByte(uint8_t c);
void process(); void process();
@@ -38,16 +42,16 @@ public:
bool busy(); bool busy();
private: private:
CSerialRB m_buffer; CRingBuffer<uint8_t> m_buffer;
arm_fir_instance_q15 m_modFilter; arm_fir_instance_q15 m_modFilter;
q15_t m_modState[180U]; // NoTaps + BlockSize - 1, 12 + 160 - 1 plus some spare q15_t m_modState[170U]; // NoTaps + BlockSize - 1, 6 + 160 - 1 plus some spare
uint8_t m_poBuffer[200U]; uint8_t m_poBuffer[200U];
uint16_t m_poLen; uint16_t m_poLen;
uint16_t m_poPtr; uint16_t m_poPtr;
uint16_t m_txDelay; uint16_t m_txDelay;
void writeByte(uint8_t c);
}; };
#endif #endif
#endif
+32 -4
View File
@@ -1,7 +1,35 @@
This is the source code of the MMDVM firmware that supports D-Star, DMR, System Fusion, P25, NXDN, and POCSAG modes. This is the source code of the MMDVM firmware that supports D-Star, DMR, System Fusion, P25, NXDN, POCSAG, and FM modes.
It runs on the Arduino Due, the ST-Micro STM32F1xxx, STM32F4xxx and STM32F7xxx processors, as well as the Teensy 3.1/3.2/3.5/3.6. What these platforms have in common is the use of an ARM Cortex-M3 or M4 processor with a clock speed greater than 70 MHz, and access to at least one analogue to digital converter and one digital to analogue converter. It runs on the Arduino Due, the ST-Micro STM32F4xxx and STM32F7xxx processors, as well as the Teensy 3.5/3.6. What these platforms have in common is the use of an ARM Cortex-M3, M4, or M7 processors with a minimum clock speed greater of 80 MHz, and access to at least one analogue to digital converter, one digital to analogue converter, as well as a number of GPIO pins.
In order to build this software for the Arduino Due, you will need to edit a file within the Arduino GUI and that is detailed in the BUILD.txt file. The STM32 support is being supplied via the Coocox IDE with ARM GCC. The Teensy support uses Teensyduino. In order to build this software for the Arduino Due, you will need to edit a file within the Arduino GUI and that is detailed in the BUILD.txt file. The STM32 support is supplied via the ARM GCC compiler. The Teensy support uses Teensyduino.
This software is licenced under the GPL v2 and is intended for amateur and educational use only. Use of this software for commercial purposes is strictly forbidden. This software is licenced under the GPL v2 and is primarily intended for amateur and educational use.
Portions of the ARM support code include the following copyright:
Copyright (c) 2011 - 2013 ARM LIMITED
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
- Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
- Neither the name of ARM nor the names of its contributors may be used
to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
-102
View File
@@ -1,102 +0,0 @@
/*
TX fifo control - Copyright (C) KI6ZUM 2015
Copyright (C) 2015,2016 by Jonathan Naylor G4KLX
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Library General Public
License as published by the Free Software Foundation; either
version 2 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Library General Public License for more details.
You should have received a copy of the GNU Library General Public
License along with this library; if not, write to the
Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
Boston, MA 02110-1301, USA.
*/
#include "RSSIRB.h"
CRSSIRB::CRSSIRB(uint16_t length) :
m_length(length),
m_head(0U),
m_tail(0U),
m_full(false),
m_overflow(false)
{
m_rssi = new uint16_t[length];
}
uint16_t CRSSIRB::getSpace() const
{
uint16_t n = 0U;
if (m_tail == m_head)
n = m_full ? 0U : m_length;
else if (m_tail < m_head)
n = m_length - m_head + m_tail;
else
n = m_tail - m_head;
if (n > m_length)
n = 0U;
return n;
}
uint16_t CRSSIRB::getData() const
{
if (m_tail == m_head)
return m_full ? m_length : 0U;
else if (m_tail < m_head)
return m_head - m_tail;
else
return m_length - m_tail + m_head;
}
bool CRSSIRB::put(uint16_t rssi)
{
if (m_full) {
m_overflow = true;
return false;
}
m_rssi[m_head] = rssi;
m_head++;
if (m_head >= m_length)
m_head = 0U;
if (m_head == m_tail)
m_full = true;
return true;
}
bool CRSSIRB::get(uint16_t& rssi)
{
if (m_head == m_tail && !m_full)
return false;
rssi = m_rssi[m_tail];
m_full = false;
m_tail++;
if (m_tail >= m_length)
m_tail = 0U;
return true;
}
bool CRSSIRB::hasOverflowed()
{
bool overflow = m_overflow;
m_overflow = false;
return overflow;
}
-59
View File
@@ -1,59 +0,0 @@
/*
Serial fifo control - Copyright (C) KI6ZUM 2015
Copyright (C) 2015,2016 by Jonathan Naylor G4KLX
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Library General Public
License as published by the Free Software Foundation; either
version 2 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Library General Public License for more details.
You should have received a copy of the GNU Library General Public
License along with this library; if not, write to the
Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
Boston, MA 02110-1301, USA.
*/
#if !defined(RSSIRB_H)
#define RSSIRB_H
#if defined(STM32F4XX)
#include "stm32f4xx.h"
#elif defined(STM32F7XX)
#include "stm32f7xx.h"
#elif defined(STM32F105xC)
#include "stm32f1xx.h"
#include <cstddef>
#else
#include <Arduino.h>
#endif
class CRSSIRB {
public:
CRSSIRB(uint16_t length);
uint16_t getSpace() const;
uint16_t getData() const;
bool put(uint16_t rssi);
bool get(uint16_t& rssi);
bool hasOverflowed();
private:
uint16_t m_length;
volatile uint16_t* m_rssi;
volatile uint16_t m_head;
volatile uint16_t m_tail;
volatile bool m_full;
bool m_overflow;
};
#endif
-47
View File
@@ -1,47 +0,0 @@
/*
* Copyright (C) 2017 Wojciech Krutnik N0CALL
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
* FIFO ring buffer
* source:
* http://stackoverflow.com/questions/6822548/correct-way-of-implementing-a-uart-receive-buffer-in-a-small-arm-microcontroller
* (modified)
*
*/
#if !defined(RINGBUFF_H)
#define RINGBUFF_H
#define RINGBUFF_SIZE(ringBuff) (ringBuff.size) /* serial buffer in bytes (power 2) */
#define RINGBUFF_MASK(ringBuff) (ringBuff.size-1U) /* buffer size mask */
/* Buffer read / write macros */
#define RINGBUFF_RESET(ringBuff) (ringBuff).rdIdx = ringBuff.wrIdx = 0
#define RINGBUFF_WRITE(ringBuff, dataIn) (ringBuff).data[RINGBUFF_MASK(ringBuff) & ringBuff.wrIdx++] = (dataIn)
#define RINGBUFF_READ(ringBuff) ((ringBuff).data[RINGBUFF_MASK(ringBuff) & ((ringBuff).rdIdx++)])
#define RINGBUFF_EMPTY(ringBuff) ((ringBuff).rdIdx == (ringBuff).wrIdx)
#define RINGBUFF_FULL(ringBuff) ((RINGBUFF_MASK(ringBuff) & ringFifo.rdIdx) == (RINGBUFF_MASK(ringBuff) & ringFifo.wrIdx))
#define RINGBUFF_COUNT(ringBuff) (RINGBUFF_MASK(ringBuff) & ((ringBuff).wrIdx - (ringBuff).rdIdx))
/* Buffer type */
#define DECLARE_RINGBUFFER_TYPE(name, _size) \
typedef struct{ \
uint32_t size; \
uint32_t wrIdx; \
uint32_t rdIdx; \
uint8_t data[_size]; \
}name##_t
#endif
+74
View File
@@ -0,0 +1,74 @@
/*
* Copyright (C) 2020,2026 by Jonathan Naylor G4KLX
* Copyright (C) 2020 by Geoffrey Merck F4FXL - KC3FRA
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#if !defined(RINGBUFFER_H)
#define RINGBUFFER_H
#if defined(STM32F4XX)
#include "stm32f4xx.h"
#elif defined(STM32F7XX)
#include "stm32f7xx.h"
#else
#include <Arduino.h>
#undef PI
#endif
#if defined(__SAM3X8E__)
#define ARM_MATH_CM3
#elif defined(STM32F7XX)
#define ARM_MATH_CM7
#elif defined(STM32F4XX) || defined(__MK20DX256__) || defined(__MK64FX512__) || defined(__MK66FX1M0__)
#define ARM_MATH_CM4
#else
#error "Unknown processor type"
#endif
#include <arm_math.h>
template <typename TDATATYPE>
class CRingBuffer {
public:
CRingBuffer(uint16_t length = 370U);
uint16_t getSpace() const;
uint16_t getData() const;
bool put(const TDATATYPE& item) volatile;
bool get(TDATATYPE& item) volatile;
TDATATYPE peek() const;
bool hasOverflowed();
void reset();
private:
uint16_t m_length;
TDATATYPE* m_buffer;
volatile uint16_t m_head;
volatile uint16_t m_tail;
volatile bool m_full;
bool m_overflow;
};
#include "RingBuffer.impl.h"
#endif
+114
View File
@@ -0,0 +1,114 @@
/*
* Copyright (C) 2020,2026 by Jonathan Naylor G4KLX
* Copyright (C) 2020 by Geoffrey Merck F4FXL - KC3FRA
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "RingBuffer.h"
template <typename TDATATYPE> CRingBuffer<TDATATYPE>::CRingBuffer(uint16_t length) :
m_length(length),
m_head(0U),
m_tail(0U),
m_full(false),
m_overflow(false)
{
m_buffer = new TDATATYPE[length];
}
template <typename TDATATYPE> uint16_t CRingBuffer<TDATATYPE>::getSpace() const
{
uint16_t n = 0U;
if (m_tail == m_head)
n = m_full ? 0U : m_length;
else if (m_tail < m_head)
n = m_length - m_head + m_tail;
else
n = m_tail - m_head;
if (n > m_length)
n = 0U;
return n;
}
template <typename TDATATYPE> uint16_t CRingBuffer<TDATATYPE>::getData() const
{
if (m_tail == m_head)
return m_full ? m_length : 0U;
else if (m_tail < m_head)
return m_head - m_tail;
else
return m_length - m_tail + m_head;
}
template <typename TDATATYPE> bool CRingBuffer<TDATATYPE>::put(const TDATATYPE& item) volatile
{
if (m_full) {
m_overflow = true;
return false;
}
m_buffer[m_head] = item;
m_head++;
if (m_head >= m_length)
m_head = 0U;
if (m_head == m_tail)
m_full = true;
return true;
}
template <typename TDATATYPE> TDATATYPE CRingBuffer<TDATATYPE>::peek() const
{
return m_buffer[m_tail];
}
template <typename TDATATYPE> bool CRingBuffer<TDATATYPE>::get(TDATATYPE& item) volatile
{
if (m_head == m_tail && !m_full)
return false;
item = m_buffer[m_tail];
m_full = false;
m_tail++;
if (m_tail >= m_length)
m_tail = 0U;
return true;
}
template <typename TDATATYPE> bool CRingBuffer<TDATATYPE>::hasOverflowed()
{
bool overflow = m_overflow;
m_overflow = false;
return overflow;
}
template <typename TDATATYPE> void CRingBuffer<TDATATYPE>::reset()
{
m_head = 0U;
m_tail = 0U;
m_full = false;
m_overflow = false;
}
Submodule
+1
Submodule STM32F4XX_Lib added at 18aeb6ea3a
File diff suppressed because it is too large Load Diff
File diff suppressed because it is too large Load Diff

Some files were not shown because too many files have changed in this diff Show More