Merge branch 'boxcar_fm' into boxcar

Drcc serial bugfix

CalFM.cpp

@@ -52,7 +52,7 @@ void CCalFM::process()
 {
   const TONE_TABLE* entry = NULL;
 
-  if (m_modemState != m_lastState)
+  if (m_modemState!=m_lastState)
   {
     switch (m_modemState) {
         case STATE_FMCAL10K:

Config.h

@@ -35,11 +35,6 @@
 // For 19.2 MHz
 // #define EXTERNAL_OSC 19200000
 
-// Use a higher baudrate for host communication. Required for FM network !
-#define SERIAL_SPEED 115200 //suitable for most older boards (Arduino, Due STM32F1_POG etc). External FM will NOT work with this !
-// #define SERIAL_SPEED 230400 // Only works on newer board M4, M7, Teensy. External FM might work with this
-// #define SERIAL_SPEED 460800 // Only works on newer board M4, M7, Teensy. External FM should work with this
-
 // Allow the use of the COS line to lockout the modem
 // #define USE_COS_AS_LOCKOUT
 

DMRDMOTX.cpp

@@ -74,7 +74,7 @@ void CDMRDMOTX::process()
       m_poLen = m_txDelay;
     } else {
       for (unsigned int i = 0U; i < DMR_FRAME_LENGTH_BYTES; i++)
-        m_fifo.get(m_poBuffer[i]);
+        m_poBuffer[i] = m_fifo.get();
 
       for (unsigned int i = 0U; i < 39U; i++)
         m_poBuffer[i + DMR_FRAME_LENGTH_BYTES] = PR_FILL[i];

DMRDMOTX.h

@@ -23,7 +23,7 @@
 #include "Config.h"
 #include "DMRDefines.h"
 
-#include "RingBuffer.h"
+#include "SerialRB.h"
 
 class CDMRDMOTX {
 public:
@@ -38,7 +38,7 @@ public:
   uint8_t getSpace() const;
 
 private:
-  CRingBuffer<uint8_t>                        m_fifo;
+  CSerialRB                        m_fifo;
   arm_fir_interpolate_instance_q15 m_modFilter;
   q15_t                            m_modState[16U];    // blockSize + phaseLength - 1, 4 + 9 - 1 plus some spare
   uint8_t                          m_poBuffer[1200U];

DMRTX.cpp

@@ -293,7 +293,7 @@ void CDMRTX::createData(uint8_t slotIndex)
 {
   if (m_fifo[slotIndex].getData() >= DMR_FRAME_LENGTH_BYTES && m_frameCount >= STARTUP_COUNT && m_abortCount[slotIndex] >= ABORT_COUNT) {
     for (unsigned int i = 0U; i < DMR_FRAME_LENGTH_BYTES; i++) {
-      m_fifo[slotIndex].get(m_poBuffer[i]);
+      m_poBuffer[i]   = m_fifo[slotIndex].get();
       m_markBuffer[i] = MARK_NONE;
     }
   } else {

DMRTX.h

@@ -23,7 +23,7 @@
 #include "Config.h"
 #include "DMRDefines.h"
 
-#include "RingBuffer.h"
+#include "SerialRB.h"
 
 enum DMRTXSTATE {
   DMRTXSTATE_IDLE,
@@ -59,7 +59,7 @@ public:
   void setColorCode(uint8_t colorCode);
 
 private:
-  CRingBuffer<uint8_t>                        m_fifo[2U];
+  CSerialRB                        m_fifo[2U];
   arm_fir_interpolate_instance_q15 m_modFilter;
   q15_t                            m_modState[16U];    // blockSize + phaseLength - 1, 4 + 9 - 1 plus some spare
   DMRTXSTATE                       m_state;

DStarTX.cpp

@@ -216,13 +216,12 @@ void CDStarTX::process()
       for (uint16_t i = 0U; i < m_txDelay; i++)
         m_poBuffer[m_poLen++] = BIT_SYNC;
     } else {
-      uint8_t dummy;
       // Pop the type byte off
-      m_buffer.get(dummy);
+      m_buffer.get();
 
       uint8_t header[DSTAR_HEADER_LENGTH_BYTES];
       for (uint8_t i = 0U; i < DSTAR_HEADER_LENGTH_BYTES; i++)
-        m_buffer.get(header[i]);
+        header[i] = m_buffer.get();
 
       uint8_t buffer[86U];
       txHeader(header, buffer + 2U);
@@ -240,19 +239,17 @@ void CDStarTX::process()
  
   if (type == DSTAR_DATA && m_poLen == 0U) {
     // Pop the type byte off
-    uint8_t dummy;
-    m_buffer.get(dummy);
+    m_buffer.get();
 
     for (uint8_t i = 0U; i < DSTAR_DATA_LENGTH_BYTES; i++)
-      m_buffer.get(m_poBuffer[m_poLen++]);
+      m_poBuffer[m_poLen++] = m_buffer.get();
 
     m_poPtr = 0U;
   }
 
   if (type == DSTAR_EOT && m_poLen == 0U) {
     // Pop the type byte off
-    uint8_t dummy;
-    m_buffer.get(dummy);
+    m_buffer.get();
 
     for (uint8_t j = 0U; j < 3U; j++) {
       for (uint8_t i = 0U; i < DSTAR_EOT_LENGTH_BYTES; i++)

DStarTX.h

@@ -21,7 +21,7 @@
 
 #include "Config.h"
 
-#include "RingBuffer.h"
+#include "SerialRB.h"
 
 class CDStarTX {
 public:
@@ -38,7 +38,7 @@ public:
   uint8_t getSpace() const;
 
 private:
-  CRingBuffer<uint8_t>             m_buffer;
+  CSerialRB                        m_buffer;
   arm_fir_interpolate_instance_q15 m_modFilter;
   q15_t                            m_modState[20U];    // blockSize + phaseLength - 1, 8 + 9 - 1 plus some spare
   uint8_t                          m_poBuffer[600U];

FM.cpp

@@ -20,16 +20,9 @@
 #include "Globals.h"
 #include "FM.h"
 
-
-const uint16_t FM_TX_BLOCK_SIZE = 100U;
-const uint16_t FM_SERIAL_BLOCK_SIZE = 84U;//this is the number of sample pairs to send over serial. One sample pair is 3bytes.
-                                          //three times this value shall never exceed 252
-const uint16_t FM_SERIAL_BLOCK_SIZE_BYTES = FM_SERIAL_BLOCK_SIZE * 3U;
-
 CFM::CFM() :
 m_callsign(),
 m_rfAck(),
-m_extAck(),
 m_ctcssRX(),
 m_ctcssTX(),
 m_timeoutTone(),
@@ -41,11 +34,9 @@ m_callsignTimer(),
 m_timeoutTimer(),
 m_holdoffTimer(),
 m_kerchunkTimer(),
-m_kerchunkTX(true),
 m_ackMinTimer(),
 m_ackDelayTimer(),
 m_hangTimer(),
-m_statusTimer(),
 m_filterStage1(  724,   1448,   724, 32768, -37895, 21352),//3rd order Cheby Filter 300 to 2700Hz, 0.2dB passband ripple, sampling rate 24kHz
 m_filterStage2(32768,      0,-32768, 32768, -50339, 19052),
 m_filterStage3(32768, -65536, 32768, 32768, -64075, 31460),
@@ -53,20 +44,15 @@ m_blanking(),
 m_useCOS(true),
 m_cosInvert(false),
 m_rfAudioBoost(1U),
-m_extAudioBoost(1U),
-m_downsampler(400U),// 100 ms of audio
-m_extEnabled(false),
+m_downsampler(128U),//Size might need adjustement
 m_rxLevel(1),
-m_inputRFRB(2401U),   // 100ms of audio + 1 sample
-m_outputRFRB(2400U),  // 100ms of audio
-m_inputExtRB()
+m_inputRB(4800U),   // 200ms of audio
+m_outputRB(2400U)   // 100ms of audio
 {
-  m_statusTimer.setTimeout(1U, 0U);
-
   insertDelay(100U);
 }
 
-void CFM::samples(bool cos, q15_t* samples, uint8_t length)
+void CFM::samples(bool cos, const q15_t* samples, uint8_t length)
 {
   if (m_useCOS) {
     if (m_cosInvert)
@@ -80,117 +66,74 @@ void CFM::samples(bool cos, q15_t* samples, uint8_t length)
   uint8_t i = 0U;
   for (; i < length; i++) {
     // ARMv7-M has hardware integer division 
-    q15_t currentRFSample = q15_t((q31_t(samples[i]) << 8) / m_rxLevel);
-    uint8_t ctcssState = m_ctcssRX.process(currentRFSample);
+    q15_t currentSample = q15_t((q31_t(samples[i]) << 8) / m_rxLevel);
+
+    uint8_t ctcssState = m_ctcssRX.process(currentSample);
 
     if (!m_useCOS) {
       // Delay the audio by 100ms to better match the CTCSS detector output
-      m_inputRFRB.put(currentRFSample);
-      m_inputRFRB.get(currentRFSample);
+      m_inputRB.put(currentSample);
+      m_inputRB.get(currentSample);
     }
 
-    q15_t currentExtSample;
-    bool inputExt = m_inputExtRB.getSample(currentExtSample);//always consume the external input data so it does not overflow
-    inputExt = inputExt && m_extEnabled;
-
-    if (!inputExt && (CTCSS_NOT_READY(ctcssState)) && m_modemState != STATE_FM) {
-      //Not enough samples to determine if you have CTCSS, just carry on. But only if we haven't any external data in the queue
+    if (CTCSS_NOT_READY(ctcssState) && m_modemState != STATE_FM) {
+      //Not enough samples to determine if you have CTCSS, just carry on
       continue;
-    } else if ((inputExt || CTCSS_READY(ctcssState)) && m_modemState != STATE_FM) {
+    } else if (CTCSS_READY(ctcssState) && m_modemState != STATE_FM) {
       //we had enough samples for CTCSS and we are in some other mode than FM
       bool validCTCSS = CTCSS_VALID(ctcssState);
-      stateMachine(validCTCSS && cos, inputExt);
+      stateMachine(validCTCSS && cos);
       if (m_modemState != STATE_FM)
         continue;
-    } else if ((inputExt || CTCSS_NOT_READY(ctcssState)) && m_modemState == STATE_FM && i == length - 1) {
+    } else if (CTCSS_READY(ctcssState) && m_modemState == STATE_FM) {
+      //We had enough samples for CTCSS and we are in FM mode, trigger the state machine
+      bool validCTCSS = CTCSS_VALID(ctcssState);
+      stateMachine(validCTCSS && cos);
+      if (m_modemState != STATE_FM)
+        break;
+    } else if (CTCSS_NOT_READY(ctcssState) && m_modemState == STATE_FM && i == length - 1) {
       //Not enough samples for CTCSS but we already are in FM, trigger the state machine
       //but do not trigger the state machine on every single sample, save CPU!
       bool validCTCSS = CTCSS_VALID(ctcssState);
-      stateMachine(validCTCSS && cos, inputExt);
+      stateMachine(validCTCSS && cos);
     }
 
-    q15_t currentSample = currentRFSample;
-    q15_t currentBoost  = m_rfAudioBoost;
-    if (m_state == FS_RELAYING_EXT || m_state == FS_KERCHUNK_EXT) {
-      currentSample = currentExtSample;
-      currentBoost  = m_extAudioBoost;
-    }
-
-    // Only let RF audio through when relaying RF audio
-    if (m_state == FS_RELAYING_RF || m_state == FS_KERCHUNK_RF || m_state == FS_RELAYING_EXT || m_state == FS_KERCHUNK_EXT) {
+    // Only let audio through when relaying audio
+    if (m_state == FS_RELAYING || m_state == FS_KERCHUNK) {  
+      // m_downsampler.addSample(currentSample);
       currentSample = m_blanking.process(currentSample);
-      if (m_extEnabled && (m_state == FS_RELAYING_RF || m_state == FS_KERCHUNK_RF))
-        m_downsampler.addSample(currentSample);
-
-      currentSample *= currentBoost;
+      currentSample *= m_rfAudioBoost;
     } else {
       currentSample = 0;
     }
 
-    if (!m_callsign.isRunning() && !m_extAck.isRunning())
+    if (!m_callsign.isRunning())
       currentSample += m_rfAck.getHighAudio();
-
-    if (!m_callsign.isRunning() && !m_rfAck.isRunning())
-      currentSample += m_extAck.getHighAudio();
-
-    if (!m_rfAck.isRunning() && !m_extAck.isRunning()) {
+    
+    if (!m_rfAck.isRunning()) {
       if (m_state == FS_LISTENING)
         currentSample += m_callsign.getHighAudio();
       else
         currentSample += m_callsign.getLowAudio();
     }
 
-    if (!m_callsign.isRunning() && !m_rfAck.isRunning() && !m_extAck.isRunning())
+    if (!m_callsign.isRunning() && !m_rfAck.isRunning())
       currentSample += m_timeoutTone.getAudio();
 
     currentSample = m_filterStage3.filter(m_filterStage2.filter(m_filterStage1.filter(currentSample)));
 
     currentSample += m_ctcssTX.getAudio();
 
-    m_outputRFRB.put(currentSample);
+    if (m_modemState == STATE_FM)
+      m_outputRB.put(currentSample);
   }
 }
 
 void CFM::process()
 {
-  uint16_t space = io.getSpace();
-  uint16_t length = m_outputRFRB.getData();
-
-  if (space > 10U && length >= FM_TX_BLOCK_SIZE ) {
-    space -= 2U;
-    if (length > FM_TX_BLOCK_SIZE)
-      length = FM_TX_BLOCK_SIZE;
-    if (space > FM_TX_BLOCK_SIZE)
-      space = FM_TX_BLOCK_SIZE;
-    if (length > space)
-      length = space;
-
-    q15_t samples[FM_TX_BLOCK_SIZE];
-
-    for (uint16_t i = 0U; i < length; i++) {
-      q15_t sample = 0;
-      m_outputRFRB.get(sample);
-      samples[i] = sample;
-    }
-
-    io.write(STATE_FM, samples, length);
-  }
-
-  if (m_extEnabled) {
-    uint16_t length = m_downsampler.getData();
-
-    if (length >= FM_SERIAL_BLOCK_SIZE) {
-      if (length > FM_SERIAL_BLOCK_SIZE)
-        length = FM_SERIAL_BLOCK_SIZE;
-        
-      TSamplePairPack serialSamples[FM_SERIAL_BLOCK_SIZE];
-
-      for (uint16_t j = 0U; j < length; j++)
-        m_downsampler.getPackedData(serialSamples[j]);
-
-      serial.writeFMData((uint8_t*)serialSamples, length * sizeof(TSamplePairPack));
-    }
-  }
+  q15_t sample;
+  while (io.getSpace() >= 3U && m_outputRB.get(sample))
+    io.write(STATE_FM, &sample, 1U);
 }
 
 void CFM::reset()
@@ -203,18 +146,13 @@ void CFM::reset()
   m_ackMinTimer.stop();
   m_ackDelayTimer.stop();
   m_hangTimer.stop();
-  m_statusTimer.stop();
 
   m_ctcssRX.reset();
   m_rfAck.stop();
-  m_extAck.stop();
   m_callsign.stop();
   m_timeoutTone.stop();
 
-  m_outputRFRB.reset();
-  m_inputExtRB.reset();
-
-  m_downsampler.reset();
+  m_outputRB.reset();
 }
 
 uint8_t CFM::setCallsign(const char* callsign, uint8_t speed, uint16_t frequency, uint8_t time, uint8_t holdoff, uint8_t highLevel, uint8_t lowLevel, bool callsignAtStart, bool callsignAtEnd, bool callsignAtLatch)
@@ -245,7 +183,7 @@ uint8_t CFM::setAck(const char* rfAck, uint8_t speed, uint16_t frequency, uint8_
   return m_rfAck.setParams(rfAck, speed, frequency, level, level);
 }
 
-uint8_t CFM::setMisc(uint16_t timeout, uint8_t timeoutLevel, uint8_t ctcssFrequency, uint8_t ctcssHighThreshold, uint8_t ctcssLowThreshold, uint8_t ctcssLevel, uint8_t kerchunkTime, bool kerchunkTX, uint8_t hangTime, bool useCOS, bool cosInvert, uint8_t rfAudioBoost, uint8_t maxDev, uint8_t rxLevel)
+uint8_t CFM::setMisc(uint16_t timeout, uint8_t timeoutLevel, uint8_t ctcssFrequency, uint8_t ctcssHighThreshold, uint8_t ctcssLowThreshold, uint8_t ctcssLevel, uint8_t kerchunkTime, uint8_t hangTime, bool useCOS, bool cosInvert, uint8_t rfAudioBoost, uint8_t maxDev, uint8_t rxLevel)
 {
   m_useCOS    = useCOS;
   m_cosInvert = cosInvert;
@@ -253,10 +191,7 @@ uint8_t CFM::setMisc(uint16_t timeout, uint8_t timeoutLevel, uint8_t ctcssFreque
   m_rfAudioBoost = q15_t(rfAudioBoost);
 
   m_timeoutTimer.setTimeout(timeout, 0U);
-
   m_kerchunkTimer.setTimeout(kerchunkTime, 0U);
-  m_kerchunkTX = kerchunkTX;
-
   m_hangTimer.setTimeout(hangTime, 0U);
 
   m_timeoutTone.setParams(timeoutLevel);
@@ -271,61 +206,45 @@ uint8_t CFM::setMisc(uint16_t timeout, uint8_t timeoutLevel, uint8_t ctcssFreque
   return m_ctcssTX.setParams(ctcssFrequency, ctcssLevel);
 }
 
-uint8_t CFM::setExt(const char* ack, uint8_t audioBoost, uint8_t speed, uint16_t frequency, uint8_t level)
-{
-  m_extEnabled = true;
-
-  m_extAudioBoost = q15_t(audioBoost);
-
-  return m_extAck.setParams(ack, speed, frequency, level, level);
-}
-
-void CFM::stateMachine(bool validRFSignal, bool validExtSignal)
+void CFM::stateMachine(bool validSignal)
 {
   switch (m_state) {
     case FS_LISTENING:
-      listeningState(validRFSignal, validExtSignal);
+      listeningState(validSignal);
       break;
-    case FS_KERCHUNK_RF:
-      kerchunkRFState(validRFSignal);
+    case FS_KERCHUNK:
+      kerchunkState(validSignal);
       break;
-    case FS_RELAYING_RF:
-      relayingRFState(validRFSignal);
+    case FS_RELAYING:
+      relayingState(validSignal);
       break;
-    case FS_RELAYING_WAIT_RF:
-      relayingRFWaitState(validRFSignal);
+    case FS_RELAYING_WAIT:
+      relayingWaitState(validSignal);
       break;
-    case FS_TIMEOUT_RF:
-      timeoutRFState(validRFSignal);
+    case FS_TIMEOUT:
+      timeoutState(validSignal);
       break;
-    case FS_TIMEOUT_WAIT_RF:
-      timeoutRFWaitState(validRFSignal);
-      break;
-    case FS_KERCHUNK_EXT:
-      kerchunkExtState(validExtSignal);
-      break;
-    case FS_RELAYING_EXT:
-      relayingExtState(validExtSignal);
-      break;
-    case FS_RELAYING_WAIT_EXT:
-      relayingExtWaitState(validExtSignal);
-      break;
-    case FS_TIMEOUT_EXT:
-      timeoutExtState(validExtSignal);
-      break;
-    case FS_TIMEOUT_WAIT_EXT:
-      timeoutExtWaitState(validExtSignal);
+    case FS_TIMEOUT_WAIT:
+      timeoutWaitState(validSignal);
       break;
     case FS_HANG:
-      hangState(validRFSignal, validExtSignal);
+      hangState(validSignal);
       break;
     default:
       break;
   }
 
-  if (m_state == FS_LISTENING && !m_rfAck.isWanted() && !m_extAck.isWanted() && !m_callsign.isWanted()) {
-    m_outputRFRB.reset();
-    m_downsampler.reset();
+  if (m_state == FS_LISTENING && m_modemState == STATE_FM) {
+    if (!m_callsign.isWanted() && !m_rfAck.isWanted()) {
+      DEBUG1("Change to STATE_IDLE");
+      m_modemState = STATE_IDLE;
+      m_callsignTimer.stop();
+      m_timeoutTimer.stop();
+      m_kerchunkTimer.stop();
+      m_ackMinTimer.stop();
+      m_ackDelayTimer.stop();
+      m_hangTimer.stop();
+    }
   }
 }
 
@@ -338,302 +257,147 @@ void CFM::clock(uint8_t length)
   m_ackMinTimer.clock(length);
   m_ackDelayTimer.clock(length);
   m_hangTimer.clock(length);
-  m_statusTimer.clock(length);
-
-  if (m_statusTimer.isRunning() && m_statusTimer.hasExpired()) {
-    serial.writeFMStatus(m_state);
-    m_statusTimer.start();
-  }
 }
 
-void CFM::listeningState(bool validRFSignal, bool validExtSignal)
+void CFM::listeningState(bool validSignal)
 {
-  if (validRFSignal) {
+  if (validSignal) {
     if (m_kerchunkTimer.getTimeout() > 0U) {
-      DEBUG1("State to KERCHUNK_RF");
-      m_state = FS_KERCHUNK_RF;
+      DEBUG1("State to KERCHUNK");
+      m_state = FS_KERCHUNK;
       m_kerchunkTimer.start();
       if (m_callsignAtStart && !m_callsignAtLatch)
         sendCallsign();
     } else {
-      DEBUG1("State to RELAYING_RF");
-      m_state = FS_RELAYING_RF;
+      DEBUG1("State to RELAYING");
+      m_state = FS_RELAYING;
       if (m_callsignAtStart)
         sendCallsign();
     }
 
-    if (m_state == FS_RELAYING_RF || (m_state == FS_KERCHUNK_RF && m_kerchunkTX)) {
-      insertSilence(50U);
+    insertSilence(50U);
 
-      beginRelaying();
-
-      m_callsignTimer.start();
-
-      io.setDecode(true);
-      io.setADCDetection(true);
-
-      m_statusTimer.start();
-      serial.writeFMStatus(m_state);
-    }
-  } else if (validExtSignal) {
-    if (m_kerchunkTimer.getTimeout() > 0U) {
-      DEBUG1("State to KERCHUNK_EXT");
-      m_state = FS_KERCHUNK_EXT;
-      m_kerchunkTimer.start();
-      if (m_callsignAtStart && !m_callsignAtLatch)
-        sendCallsign();
-    } else {
-      DEBUG1("State to RELAYING_EXT");
-      m_state = FS_RELAYING_EXT;
-      if (m_callsignAtStart)
-        sendCallsign();
-    }
-
-    if (m_state == FS_RELAYING_EXT || (m_state == FS_KERCHUNK_EXT && m_kerchunkTX)) {
-      insertSilence(50U);
-
-      beginRelaying();
-
-      m_callsignTimer.start();
-
-      m_statusTimer.start();
-      serial.writeFMStatus(m_state);
-    }
-  }
-}
-
-void CFM::kerchunkRFState(bool validSignal)
-{
-  if (validSignal) {
-    if (m_kerchunkTimer.hasExpired()) {
-      DEBUG1("State to RELAYING_RF");
-      m_state = FS_RELAYING_RF;
-      m_kerchunkTimer.stop();
-      if (!m_kerchunkTX) {
-        insertSilence(50U);
-
-        beginRelaying();
-
-        m_callsignTimer.start();
-
-        io.setDecode(true);
-        io.setADCDetection(true);
-
-        m_statusTimer.start();
-        serial.writeFMStatus(m_state);
-      }
-      if (m_callsignAtStart && m_callsignAtLatch) {
-        sendCallsign();
-        m_callsignTimer.start();
-      }
-    }
-  } else {
-    io.setDecode(false);
-    io.setADCDetection(false);
-
-    DEBUG1("State to LISTENING");
-    m_state = FS_LISTENING;
-    m_kerchunkTimer.stop();
-    m_timeoutTimer.stop();
-    m_ackMinTimer.stop();
-    m_callsignTimer.stop();
-    m_statusTimer.stop();
-
-    if (m_extEnabled)
-      serial.writeFMEOT();
-  }
-}
-
-void CFM::relayingRFState(bool validSignal)
-{
-  if (validSignal) {
-    if (m_timeoutTimer.isRunning() && m_timeoutTimer.hasExpired()) {
-      DEBUG1("State to TIMEOUT_RF");
-      m_state = FS_TIMEOUT_RF;
-      m_ackMinTimer.stop();
-      m_timeoutTimer.stop();
-      m_timeoutTone.start();
-
-      if (m_extEnabled)
-        serial.writeFMEOT();
-    }
-  } else {
-    io.setDecode(false);
-    io.setADCDetection(false);
-
-    DEBUG1("State to RELAYING_WAIT_RF");
-    m_state = FS_RELAYING_WAIT_RF;
-    m_ackDelayTimer.start();
-
-    if (m_extEnabled)
-      serial.writeFMEOT();
-  }
-
-  if (m_callsignTimer.isRunning() && m_callsignTimer.hasExpired()) {
-    sendCallsign();
-    m_callsignTimer.start();
-  }
-}
-
-void CFM::relayingRFWaitState(bool validSignal)
-{
-  if (validSignal) {
-    io.setDecode(true);
-    io.setADCDetection(true);
-
-    DEBUG1("State to RELAYING_RF");
-    m_state = FS_RELAYING_RF;
-    m_ackDelayTimer.stop();
-  } else {
-    if (m_ackDelayTimer.isRunning() && m_ackDelayTimer.hasExpired()) {
-      DEBUG1("State to HANG");
-      m_state = FS_HANG;
-
-      if (m_ackMinTimer.isRunning()) {
-        if (m_ackMinTimer.hasExpired()) {
-          DEBUG1("Send RF ack");
-          m_rfAck.start();
-          m_ackMinTimer.stop();
-        }
-      } else {
-          DEBUG1("Send RF ack");
-          m_rfAck.start();
-          m_ackMinTimer.stop();
-      }
-
-      m_ackDelayTimer.stop();
-      m_timeoutTimer.stop();
-      m_hangTimer.start();
-    }
-  }
-
-  if (m_callsignTimer.isRunning() && m_callsignTimer.hasExpired()) {
-    sendCallsign();
-    m_callsignTimer.start();
-  }
-}
-
-void CFM::kerchunkExtState(bool validSignal)
-{
-  if (validSignal) {
-    if (m_kerchunkTimer.hasExpired()) {
-      DEBUG1("State to RELAYING_EXT");
-      m_state = FS_RELAYING_EXT;
-      m_kerchunkTimer.stop();
-      if (!m_kerchunkTX) {
-        insertSilence(50U);
-
-        beginRelaying();
-
-        m_callsignTimer.start();
-
-        m_statusTimer.start();
-        serial.writeFMStatus(m_state);
-      }
-      if (m_callsignAtStart && m_callsignAtLatch) {
-        sendCallsign();
-        m_callsignTimer.start();
-      }
-    }
-  } else {
-    DEBUG1("State to LISTENING");
-    m_state = FS_LISTENING;
-    m_kerchunkTimer.stop();
-    m_timeoutTimer.stop();
-    m_ackMinTimer.stop();
-    m_callsignTimer.stop();
-    m_statusTimer.stop();
-  }
-}
-
-void CFM::relayingExtState(bool validSignal)
-{
-  if (validSignal) {
-    if (m_timeoutTimer.isRunning() && m_timeoutTimer.hasExpired()) {
-      DEBUG1("State to TIMEOUT_EXT");
-      m_state = FS_TIMEOUT_EXT;
-      m_ackMinTimer.stop();
-      m_timeoutTimer.stop();
-      m_timeoutTone.start();
-    }
-  } else {
-    DEBUG1("State to RELAYING_WAIT_EXT");
-    m_state = FS_RELAYING_WAIT_EXT;
-    m_ackDelayTimer.start();
-  }
-
-  if (m_callsignTimer.isRunning() && m_callsignTimer.hasExpired()) {
-    sendCallsign();
-    m_callsignTimer.start();
-  }
-}
-
-void CFM::relayingExtWaitState(bool validSignal)
-{
-  if (validSignal) {
-    DEBUG1("State to RELAYING_EXT");
-    m_state = FS_RELAYING_EXT;
-    m_ackDelayTimer.stop();
-  } else {
-    if (m_ackDelayTimer.isRunning() && m_ackDelayTimer.hasExpired()) {
-      DEBUG1("State to HANG");
-      m_state = FS_HANG;
-
-      if (m_ackMinTimer.isRunning()) {
-        if (m_ackMinTimer.hasExpired()) {
-          DEBUG1("Send Ext ack");
-          m_extAck.start();
-          m_ackMinTimer.stop();
-        }
-      } else {
-          DEBUG1("Send Ext ack");
-          m_extAck.start();
-          m_ackMinTimer.stop();
-      }
-
-      m_ackDelayTimer.stop();
-      m_timeoutTimer.stop();
-      m_hangTimer.start();
-    }
-  }
-
-  if (m_callsignTimer.isRunning() && m_callsignTimer.hasExpired()) {
-    sendCallsign();
-    m_callsignTimer.start();
-  }
-}
-
-void CFM::hangState(bool validRFSignal, bool validExtSignal)
-{
-  if (validRFSignal) {
-    io.setDecode(true);
-    io.setADCDetection(true);
-
-    DEBUG1("State to RELAYING_RF");
-    m_state = FS_RELAYING_RF;
-    DEBUG1("Stop ack");
-    m_rfAck.stop();
-    m_extAck.stop();
     beginRelaying();
-  } else if (validExtSignal) {
-    DEBUG1("State to RELAYING_EXT");
-    m_state = FS_RELAYING_EXT;
+
+    m_callsignTimer.start();
+
+    io.setDecode(true);
+    io.setADCDetection(true);
+
+    DEBUG1("Change to STATE_FM");
+    m_modemState = STATE_FM;
+  }
+}
+
+void CFM::kerchunkState(bool validSignal)
+{
+  if (validSignal) {
+    if (m_kerchunkTimer.hasExpired()) {
+      DEBUG1("State to RELAYING");
+      m_state = FS_RELAYING;
+      m_kerchunkTimer.stop();
+      if (m_callsignAtStart && m_callsignAtLatch) {
+        sendCallsign();
+        m_callsignTimer.start();
+      }
+    }
+  } else {
+    io.setDecode(false);
+    io.setADCDetection(false);
+
+    DEBUG1("State to LISTENING");
+    m_state = FS_LISTENING;
+    m_kerchunkTimer.stop();
+    m_timeoutTimer.stop();
+    m_ackMinTimer.stop();
+    m_callsignTimer.stop();
+  }
+}
+
+void CFM::relayingState(bool validSignal)
+{
+  if (validSignal) {
+    if (m_timeoutTimer.isRunning() && m_timeoutTimer.hasExpired()) {
+      DEBUG1("State to TIMEOUT");
+      m_state = FS_TIMEOUT;
+      m_ackMinTimer.stop();
+      m_timeoutTimer.stop();
+      m_timeoutTone.start();
+    }
+  } else {
+    io.setDecode(false);
+    io.setADCDetection(false);
+
+    DEBUG1("State to RELAYING_WAIT");
+    m_state = FS_RELAYING_WAIT;
+    m_ackDelayTimer.start();
+  }
+
+  if (m_callsignTimer.isRunning() && m_callsignTimer.hasExpired()) {
+    sendCallsign();
+    m_callsignTimer.start();
+  }
+}
+
+void CFM::relayingWaitState(bool validSignal)
+{
+  if (validSignal) {
+    io.setDecode(true);
+    io.setADCDetection(true);
+
+    DEBUG1("State to RELAYING");
+    m_state = FS_RELAYING;
+    m_ackDelayTimer.stop();
+  } else {
+    if (m_ackDelayTimer.isRunning() && m_ackDelayTimer.hasExpired()) {
+      DEBUG1("State to HANG");
+      m_state = FS_HANG;
+
+      if (m_ackMinTimer.isRunning()) {
+        if (m_ackMinTimer.hasExpired()) {
+          DEBUG1("Send ack");
+          m_rfAck.start();
+          m_ackMinTimer.stop();
+        }
+      } else {
+          DEBUG1("Send ack");
+          m_rfAck.start();
+          m_ackMinTimer.stop();
+      }
+
+      m_ackDelayTimer.stop();
+      m_timeoutTimer.stop();
+      m_hangTimer.start();
+    }
+  }
+
+  if (m_callsignTimer.isRunning() && m_callsignTimer.hasExpired()) {
+    sendCallsign();
+    m_callsignTimer.start();
+  }
+}
+
+void CFM::hangState(bool validSignal)
+{
+  if (validSignal) {
+    io.setDecode(true);
+    io.setADCDetection(true);
+
+    DEBUG1("State to RELAYING");
+    m_state = FS_RELAYING;
     DEBUG1("Stop ack");
     m_rfAck.stop();
-    m_extAck.stop();
     beginRelaying();
   } else {
     if (m_hangTimer.isRunning() && m_hangTimer.hasExpired()) {
       DEBUG1("State to LISTENING");
       m_state = FS_LISTENING;
       m_hangTimer.stop();
-      m_statusTimer.stop();
 
       if (m_callsignAtEnd)
         sendCallsign();
 
       m_callsignTimer.stop();
-
     }
   }
 
@@ -643,18 +407,14 @@ void CFM::hangState(bool validRFSignal, bool validExtSignal)
   }
 }
 
-void CFM::timeoutRFState(bool validSignal)
+void CFM::timeoutState(bool validSignal)
 {
   if (!validSignal) {
     io.setDecode(false);
     io.setADCDetection(false);
 
-    DEBUG1("State to TIMEOUT_WAIT_RF");
-    m_state = FS_TIMEOUT_WAIT_RF;
-
-    if (m_callsignAtEnd)
-        sendCallsign();
-
+    DEBUG1("State to TIMEOUT_WAIT");
+    m_state = FS_TIMEOUT_WAIT;
     m_ackDelayTimer.start();
   }
 
@@ -664,21 +424,21 @@ void CFM::timeoutRFState(bool validSignal)
   }
 }
 
-void CFM::timeoutRFWaitState(bool validSignal)
+void CFM::timeoutWaitState(bool validSignal)
 {
   if (validSignal) {
     io.setDecode(true);
     io.setADCDetection(true);
 
-    DEBUG1("State to TIMEOUT_RF");
-    m_state = FS_TIMEOUT_RF;
+    DEBUG1("State to TIMEOUT");
+    m_state = FS_TIMEOUT;
     m_ackDelayTimer.stop();
   } else {
     if (m_ackDelayTimer.isRunning() && m_ackDelayTimer.hasExpired()) {
       DEBUG1("State to HANG");
       m_state = FS_HANG;
       m_timeoutTone.stop();
-      DEBUG1("Send RF ack");
+      DEBUG1("Send ack");
       m_rfAck.start();
       m_ackDelayTimer.stop();
       m_ackMinTimer.stop();
@@ -693,45 +453,6 @@ void CFM::timeoutRFWaitState(bool validSignal)
   }
 }
 
-void CFM::timeoutExtState(bool validSignal)
-{
-  if (!validSignal) {
-    DEBUG1("State to TIMEOUT_WAIT_EXT");
-    m_state = FS_TIMEOUT_WAIT_EXT;
-    m_ackDelayTimer.start();
-  }
-
-  if (m_callsignTimer.isRunning() && m_callsignTimer.hasExpired()) {
-    sendCallsign();
-    m_callsignTimer.start();
-  }
-}
-
-void CFM::timeoutExtWaitState(bool validSignal)
-{
-  if (validSignal) {
-    DEBUG1("State to TIMEOUT_EXT");
-    m_state = FS_TIMEOUT_EXT;
-    m_ackDelayTimer.stop();
-  } else {
-    if (m_ackDelayTimer.isRunning() && m_ackDelayTimer.hasExpired()) {
-      DEBUG1("State to HANG");
-      m_state = FS_HANG;
-      m_timeoutTone.stop();
-      DEBUG1("Send Ext ack");
-      m_extAck.start();
-      m_ackDelayTimer.stop();
-      m_ackMinTimer.stop();
-      m_timeoutTimer.stop();
-      m_hangTimer.start();
-    }
-  }
-
-  if (m_callsignTimer.isRunning() && m_callsignTimer.hasExpired()) {
-    sendCallsign();
-    m_callsignTimer.start();
-  }
-}
 void CFM::sendCallsign()
 {
   if (m_holdoffTimer.isRunning()) {
@@ -752,25 +473,12 @@ void CFM::beginRelaying()
   m_ackMinTimer.start();
 }
 
-uint8_t CFM::getSpace() const
-{
-  // The amount of free space for receiving external audio, in frames.
-  return m_inputExtRB.getSpace() / FM_SERIAL_BLOCK_SIZE_BYTES;
-}
-
-uint8_t CFM::writeData(const uint8_t* data, uint8_t length)
-{
-  //todo check if length is a multiple of 3
-  m_inputExtRB.addData(data, length);
-  return 0U;
-}
-
 void CFM::insertDelay(uint16_t ms)
 {
   uint32_t nSamples = ms * 24U;
 
   for (uint32_t i = 0U; i < nSamples; i++)
-    m_inputRFRB.put(0);
+    m_inputRB.put(0);
 }
 
 void CFM::insertSilence(uint16_t ms)
@@ -778,5 +486,5 @@ void CFM::insertSilence(uint16_t ms)
   uint32_t nSamples = ms * 24U;
 
   for (uint32_t i = 0U; i < nSamples; i++)
-    m_outputRFRB.put(0);
+    m_outputRB.put(0);
 }

FM.h

@@ -27,32 +27,28 @@
 #include "FMTimeout.h"
 #include "FMKeyer.h"
 #include "FMTimer.h"
-#include "RingBuffer.h"
+#include "FMRB.h"
 #include "FMDirectForm1.h"
 #include "FMDownsampler.h"
-#include "FMUpSampler.h"
 
 enum FM_STATE {
   FS_LISTENING,
-  FS_KERCHUNK_RF,
-  FS_RELAYING_RF,
-  FS_RELAYING_WAIT_RF,
-  FS_TIMEOUT_RF,
-  FS_TIMEOUT_WAIT_RF,
-  FS_KERCHUNK_EXT,
-  FS_RELAYING_EXT,
-  FS_RELAYING_WAIT_EXT,
-  FS_TIMEOUT_EXT,
-  FS_TIMEOUT_WAIT_EXT,
+  FS_KERCHUNK,
+  FS_RELAYING,
+  FS_RELAYING_WAIT,
+  FS_TIMEOUT,
+  FS_TIMEOUT_WAIT,
   FS_HANG
 };
 
 
+
+
 class CFM {
 public:
   CFM();
 
-  void samples(bool cos, q15_t* samples, uint8_t length);
+  void samples(bool cos, const q15_t* samples, uint8_t length);
 
   void process();
 
@@ -60,17 +56,11 @@ public:
 
   uint8_t setCallsign(const char* callsign, uint8_t speed, uint16_t frequency, uint8_t time, uint8_t holdoff, uint8_t highLevel, uint8_t lowLevel, bool callsignAtStart, bool callsignAtEnd, bool callsignAtLatch);
   uint8_t setAck(const char* rfAck, uint8_t speed, uint16_t frequency, uint8_t minTime, uint16_t delay, uint8_t level);
-  uint8_t setMisc(uint16_t timeout, uint8_t timeoutLevel, uint8_t ctcssFrequency, uint8_t ctcssHighThreshold, uint8_t ctcssLowThreshold, uint8_t ctcssLevel, uint8_t kerchunkTime, bool kerchunkTX, uint8_t hangTime, bool useCOS, bool cosInvert, uint8_t rfAudioBoost, uint8_t maxDev, uint8_t rxLevel);
-  uint8_t setExt(const char* ack, uint8_t audioBoost, uint8_t speed, uint16_t frequency, uint8_t level);
-
-  uint8_t getSpace() const;
-
-  uint8_t writeData(const uint8_t* data, uint8_t length);
+  uint8_t setMisc(uint16_t timeout, uint8_t timeoutLevel, uint8_t ctcssFrequency, uint8_t ctcssHighThreshold, uint8_t ctcssLowThreshold, uint8_t ctcssLevel, uint8_t kerchunkTime, uint8_t hangTime, bool useCOS, bool cosInvert, uint8_t rfAudioBoost, uint8_t maxDev, uint8_t rxLevel);
 
 private:
   CFMKeyer             m_callsign;
   CFMKeyer             m_rfAck;
-  CFMKeyer             m_extAck;
   CFMCTCSSRX           m_ctcssRX;
   CFMCTCSSTX           m_ctcssTX;
   CFMTimeout           m_timeoutTone;
@@ -82,11 +72,9 @@ private:
   CFMTimer             m_timeoutTimer;
   CFMTimer             m_holdoffTimer;
   CFMTimer             m_kerchunkTimer;
-  bool                 m_kerchunkTX;
   CFMTimer             m_ackMinTimer;
   CFMTimer             m_ackDelayTimer;
   CFMTimer             m_hangTimer;
-  CFMTimer             m_statusTimer;
   CFMDirectFormI       m_filterStage1;
   CFMDirectFormI       m_filterStage2;
   CFMDirectFormI       m_filterStage3;
@@ -94,27 +82,19 @@ private:
   bool                 m_useCOS;
   bool                 m_cosInvert;
   q15_t                m_rfAudioBoost;
-  q15_t                m_extAudioBoost;
   CFMDownsampler       m_downsampler;
-  bool                 m_extEnabled;
   q15_t                m_rxLevel;
-  CRingBuffer<q15_t>   m_inputRFRB;
-  CRingBuffer<q15_t>   m_outputRFRB;
-  CFMUpSampler         m_inputExtRB;
+  CFMRB                m_inputRB;
+  CFMRB                m_outputRB;
 
-  void stateMachine(bool validRFSignal, bool validExtSignal);
-  void listeningState(bool validRFSignal, bool validExtSignal);
-  void kerchunkRFState(bool validSignal);
-  void relayingRFState(bool validSignal);
-  void relayingRFWaitState(bool validSignal);
-  void timeoutRFState(bool validSignal);
-  void timeoutRFWaitState(bool validSignal);
-  void kerchunkExtState(bool validSignal);
-  void relayingExtState(bool validSignal);
-  void relayingExtWaitState(bool validSignal);
-  void timeoutExtState(bool validSignal);
-  void timeoutExtWaitState(bool validSignal);
-  void hangState(bool validRFSignal, bool validExtSignal);
+  void stateMachine(bool validSignal);
+  void listeningState(bool validSignal);
+  void kerchunkState(bool validSignal);
+  void relayingState(bool validSignal);
+  void relayingWaitState(bool validSignal);
+  void timeoutState(bool validSignal);
+  void timeoutWaitState(bool validSignal);
+  void hangState(bool validSignal);
 
   void clock(uint8_t length);
 

FMDirectForm1.h

@@ -29,7 +29,7 @@ THE SOFTWARE.
 
 // based on https://raw.githubusercontent.com/berndporr/iir_fixed_point/master/DirectFormI.h
 
-#include <cstdint>
+#include "Globals.h"
 
 #ifndef DIRECTFORMI_H_
 #define DIRECTFORMI_H_

FMDownsampleRB.cpp

@@ -1,6 +1,5 @@
 /*
  *   Copyright (C) 2020 by Jonathan Naylor G4KLX
- *   Copyright (C) 2020 by Geoffrey Merck F4FXL - KC3FRA
  *
  *   This program is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by
@@ -17,19 +16,20 @@
  *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include "RingBuffer.h"
 
-template <typename TDATATYPE> CRingBuffer<TDATATYPE>::CRingBuffer(uint16_t length) :
+#include "FMDownsampleRB.h"
+
+CFMDownsampleRB::CFMDownsampleRB(uint16_t length) :
 m_length(length),
 m_head(0U),
 m_tail(0U),
 m_full(false),
 m_overflow(false)
 {
-  m_buffer = new TDATATYPE[length];
+  m_samples = new uint8_t[length];
 }
 
-template <typename TDATATYPE> uint16_t CRingBuffer<TDATATYPE>::getSpace() const
+uint16_t CFMDownsampleRB::getSpace() const
 {
   uint16_t n = 0U;
 
@@ -46,7 +46,7 @@ template <typename TDATATYPE> uint16_t CRingBuffer<TDATATYPE>::getSpace() const
   return n;
 }
 
-template <typename TDATATYPE> uint16_t CRingBuffer<TDATATYPE>::getData() const
+uint16_t CFMDownsampleRB::getData() const
 {
   if (m_tail == m_head)
     return m_full ? m_length : 0U;
@@ -56,14 +56,14 @@ template <typename TDATATYPE> uint16_t CRingBuffer<TDATATYPE>::getData() const
     return m_length - m_tail + m_head;
 }
 
-template <typename TDATATYPE> bool CRingBuffer<TDATATYPE>::put(TDATATYPE item) volatile
+bool CFMDownsampleRB::put(uint8_t sample)
 {
   if (m_full) {
     m_overflow = true;
     return false;
   }
 
-  m_buffer[m_head] = item;
+  m_samples[m_head] = sample;
 
   m_head++;
   if (m_head >= m_length)
@@ -75,17 +75,12 @@ template <typename TDATATYPE> bool CRingBuffer<TDATATYPE>::put(TDATATYPE item) v
   return true;
 }
 
-template <typename TDATATYPE> TDATATYPE CRingBuffer<TDATATYPE>::peek() const
-{
-  return m_buffer[m_tail];
-}
-
-template <typename TDATATYPE> bool CRingBuffer<TDATATYPE>::get(TDATATYPE& item) volatile
+bool CFMDownsampleRB::get(uint8_t& sample)
 {
   if (m_head == m_tail && !m_full)
     return false;
 
-  item = m_buffer[m_tail];
+  sample = m_samples[m_tail];
 
   m_full = false;
 
@@ -96,7 +91,7 @@ template <typename TDATATYPE> bool CRingBuffer<TDATATYPE>::get(TDATATYPE& item)
   return true;
 }
 
-template <typename TDATATYPE> bool CRingBuffer<TDATATYPE>::hasOverflowed()
+bool CFMDownsampleRB::hasOverflowed()
 {
   bool overflow = m_overflow;
 
@@ -104,11 +99,3 @@ template <typename TDATATYPE> bool CRingBuffer<TDATATYPE>::hasOverflowed()
 
   return overflow;
 }
-
-template <typename TDATATYPE> void CRingBuffer<TDATATYPE>::reset()
-{
-  m_head = 0U;
-  m_tail = 0U;
-  m_full     = false;
-  m_overflow = false;
-}

FMDownsampleRB.h

@@ -1,6 +1,5 @@
 /*
  *   Copyright (C) 2020 by Jonathan Naylor G4KLX
- *   Copyright (C) 2020 by Geoffrey Merck F4FXL - KC3FRA
  *
  *   This program is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by
@@ -17,8 +16,8 @@
  *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#if !defined(RINGBUFFER_H)
-#define  RINGBUFFER_H
+#if !defined(FMDOWNSAMPLERB_H)
+#define  FMDOWNSAMPLERB_H
 
 #if defined(STM32F4XX)
 #include "stm32f4xx.h"
@@ -29,7 +28,6 @@
 #include <cstddef>
 #else
 #include <Arduino.h>
-#undef PI
 #endif
 
 #if defined(__SAM3X8E__) || defined(STM32F105xC)
@@ -44,34 +42,27 @@
 
 #include <arm_math.h>
 
-template <typename TDATATYPE>
-class CRingBuffer {
+class CFMDownsampleRB {
 public:
-  CRingBuffer(uint16_t length = 370U);
+  CFMDownsampleRB(uint16_t length);
   
   uint16_t getSpace() const;
   
   uint16_t getData() const;
 
-  bool put(TDATATYPE item) volatile;
+  bool put(uint8_t sample);
 
-  bool get(TDATATYPE& item) volatile;
-
-  TDATATYPE peek() const;
+  bool get(uint8_t& sample);
 
   bool hasOverflowed();
 
-  void reset();
-
 private:
-  uint16_t              m_length;
-  TDATATYPE*            m_buffer;
-  volatile uint16_t     m_head;
-  volatile uint16_t     m_tail;
-  volatile bool         m_full;
-  bool                  m_overflow;
+  uint16_t          m_length;
+  volatile uint8_t* m_samples;
+  volatile uint16_t m_head;
+  volatile uint16_t m_tail;
+  volatile bool     m_full;
+  bool              m_overflow;
 };
 
-#include "RingBuffer.impl.h"
-
-#endif
+#endif

FMDownsampler.cpp

@@ -20,55 +20,44 @@
 #include "Config.h"
 #include "FMDownsampler.h"
 
+
 CFMDownsampler::CFMDownsampler(uint16_t length) :
-m_ringBuffer(length),
-m_samplePack(0U),
-m_samplePackPointer(NULL),
-m_sampleIndex(0U)
+m_ringBuffer(length),//length might need tweaking
+m_packIndex(0),
+m_downSampleIndex(0)
 {
-  m_samplePackPointer = (uint8_t*)&m_samplePack;
+    m_samplePack = 0;
 }
 
 void CFMDownsampler::addSample(q15_t sample)
 {
-  uint32_t usample = uint32_t(int32_t(sample) + 2048);
-  //only take one of three samples
-  switch(m_sampleIndex){
-    case 0:
-      m_samplePack = usample << 12;
-    break;
-    case 3:{
-      m_samplePack |= usample;
-      
-      //we did not use MSB; skip it
-      TSamplePairPack pair{m_samplePackPointer[0U], m_samplePackPointer[1U], m_samplePackPointer[2U]}; 
+    //only take one of three samples
+    if(m_downSampleIndex == 0) {
+      switch(m_packIndex){
+        case 0:
+          m_samplePack = int32_t(sample) << 12;
+        break;
+        case 1:{
+            m_samplePack |= int32_t(sample);
+            
+            //we did not use MSB; skip it
+            m_ringBuffer.put(m_samplePackBytes[1]); 
+            m_ringBuffer.put(m_samplePackBytes[2]); 
+            m_ringBuffer.put(m_samplePackBytes[3]); 
 
-      m_ringBuffer.put(pair);
-
-      m_samplePack = 0U;//reset the sample pack
+            m_samplePack = 0;
+        }
+        break;
+        default:
+            //should never happen
+        break;
+        }
+        m_packIndex++;
+        if(m_packIndex >= 2)
+            m_packIndex = 0;  
     }
-    break;
-    default:
-        //Just skip this sample
-    break;
-  }
 
-  m_sampleIndex++;
-  if(m_sampleIndex >= 6U)//did we pack two samples ?
-      m_sampleIndex = 0U;  
-}
-
-bool CFMDownsampler::getPackedData(TSamplePairPack& data)
-{
-  return m_ringBuffer.get(data);
-}
-
-uint16_t CFMDownsampler::getData()
-{
-  return m_ringBuffer.getData();
-}
-
-void CFMDownsampler::reset()
-{
-  m_sampleIndex = 0U;
+    m_downSampleIndex++;
+    if(m_downSampleIndex >= 3)
+        m_downSampleIndex = 0;
 }

FMDownsampler.h

@@ -21,22 +21,23 @@
 #define FMDOWNSAMPLER_H
 
 #include "Config.h"
-#include "RingBuffer.h"
-#include "FMSamplePairPack.h"
+#include "FMDownsampleRB.h"
 
 class CFMDownsampler {
 public:
   CFMDownsampler(uint16_t length);
   void addSample(q15_t sample);
-  bool getPackedData(TSamplePairPack& data);
-  uint16_t getData();
-  void reset();
+  inline bool getPackedData(uint8_t& data){ return m_ringBuffer.get(data); };
+  inline bool hasOverflowed() { return m_ringBuffer.hasOverflowed(); };
 
 private:
-  CRingBuffer<TSamplePairPack> m_ringBuffer;
-  uint32_t                     m_samplePack;
-  uint8_t*                     m_samplePackPointer;
-  uint8_t                      m_sampleIndex;
+  CFMDownsampleRB m_ringBuffer;
+  union {
+    int32_t m_samplePack;
+    int8_t  m_samplePackBytes[4];
+  };
+  uint8_t m_packIndex;
+  uint8_t m_downSampleIndex;
 };
 
 #endif

FMRB.cpp

@@ -0,0 +1,110 @@
+/*
+TX fifo control - Copyright (C) KI6ZUM 2015
+Copyright (C) 2015,2016,2020 by Jonathan Naylor G4KLX
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Library General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+Library General Public License for more details.
+
+You should have received a copy of the GNU Library General Public
+License along with this library; if not, write to the
+Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
+Boston, MA  02110-1301, USA.
+*/
+
+#include "FMRB.h"
+
+CFMRB::CFMRB(uint16_t length) :
+m_length(length),
+m_head(0U),
+m_tail(0U),
+m_full(false),
+m_overflow(false)
+{
+  m_samples = new q15_t[length];
+}
+
+uint16_t CFMRB::getSpace() const
+{
+  uint16_t n = 0U;
+
+  if (m_tail == m_head)
+    n = m_full ? 0U : m_length;
+  else if (m_tail < m_head)
+    n = m_length - m_head + m_tail;
+  else
+    n = m_tail - m_head;
+
+  if (n > m_length)
+    n = 0U;
+
+  return n;
+}
+
+uint16_t CFMRB::getData() const
+{
+  if (m_tail == m_head)
+    return m_full ? m_length : 0U;
+  else if (m_tail < m_head)
+    return m_head - m_tail;
+  else
+    return m_length - m_tail + m_head;
+}
+
+bool CFMRB::put(q15_t sample)
+{
+  if (m_full) {
+    m_overflow = true;
+    return false;
+  }
+
+  m_samples[m_head] = sample;
+
+  m_head++;
+  if (m_head >= m_length)
+    m_head = 0U;
+
+  if (m_head == m_tail)
+    m_full = true;
+
+  return true;
+}
+
+bool CFMRB::get(q15_t& sample)
+{
+  if (m_head == m_tail && !m_full)
+    return false;
+
+  sample = m_samples[m_tail];
+
+  m_full = false;
+
+  m_tail++;
+  if (m_tail >= m_length)
+    m_tail = 0U;
+
+  return true;
+}
+
+bool CFMRB::hasOverflowed()
+{
+  bool overflow = m_overflow;
+
+  m_overflow = false;
+
+  return overflow;
+}
+
+void CFMRB::reset()
+{
+  m_head = 0U;
+  m_tail = 0U;
+  m_full     = false;
+  m_overflow = false;
+}

FMRB.h

@@ -0,0 +1,72 @@
+/*
+Serial fifo control - Copyright (C) KI6ZUM 2015
+Copyright (C) 2015,2016,2020 by Jonathan Naylor G4KLX
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Library General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+Library General Public License for more details.
+
+You should have received a copy of the GNU Library General Public
+License along with this library; if not, write to the
+Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
+Boston, MA  02110-1301, USA.
+*/
+
+#if !defined(FMRB_H)
+#define  FMRB_H
+
+#if defined(STM32F4XX)
+#include "stm32f4xx.h"
+#elif defined(STM32F7XX)
+#include "stm32f7xx.h"
+#elif defined(STM32F105xC)
+#include "stm32f1xx.h"
+#include <cstddef>
+#else
+#include <Arduino.h>
+#endif
+
+#if defined(__SAM3X8E__) || defined(STM32F105xC)
+#define  ARM_MATH_CM3
+#elif defined(STM32F7XX)
+#define  ARM_MATH_CM7
+#elif defined(STM32F4XX) || defined(__MK20DX256__) || defined(__MK64FX512__) || defined(__MK66FX1M0__)
+#define  ARM_MATH_CM4
+#else
+#error "Unknown processor type"
+#endif
+
+#include <arm_math.h>
+
+class CFMRB {
+public:
+  CFMRB(uint16_t length);
+  
+  uint16_t getSpace() const;
+  
+  uint16_t getData() const;
+
+  bool put(q15_t sample);
+
+  bool get(q15_t& sample);
+
+  bool hasOverflowed();
+
+  void reset();
+
+private:
+  uint16_t          m_length;
+  volatile q15_t*   m_samples;
+  volatile uint16_t m_head;
+  volatile uint16_t m_tail;
+  volatile bool     m_full;
+  bool              m_overflow;
+};
+
+#endif

FMSamplePairPack.h

@@ -1,29 +0,0 @@
-/*
- *   Copyright (C) 2020 by Jonathan Naylor G4KLX
- *   Copyright (C) 2020 by Geoffrey Merck F4FXL - KC3FRA
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#if !defined(TSAMPLEPACK_H)
-#define TSAMPLEPACK_H
-
-struct TSamplePairPack {
-  uint8_t byte0;
-  uint8_t byte1;
-  uint8_t byte2;
-};
-
-#endif

FMUpSampler.cpp

@@ -1,97 +0,0 @@
-/*
- *   Copyright (C) 2020 by Jonathan Naylor G4KLX
- *   Copyright (C) 2020 by Geoffrey Merck F4FXL - KC3FRA
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include "FMUpSampler.h"
-
-const uint32_t FM_UPSAMPLE_MASK = 0x00000FFFU;
-
-CFMUpSampler::CFMUpSampler() :
-m_upSampleIndex(0),
-m_pack(0U),
-m_packPointer(NULL),
-m_samples(3600U), //300ms of 12 bit 8kHz audio
-m_running(false)
-{
-  m_packPointer = (uint8_t*)&m_pack;
-}
-
-void CFMUpSampler::reset()
-{
-    m_upSampleIndex = 0U;
-    m_pack = 0U;
-    m_samples.reset();
-    m_running = false;
-}
-
-void CFMUpSampler::addData(const uint8_t* data, uint16_t length)
-{
-  TSamplePairPack* packPointer = (TSamplePairPack*)data;
-  TSamplePairPack* packPointerEnd = packPointer + (length / 3U);
-  while(packPointer != packPointerEnd) {
-    m_samples.put(*packPointer);
-    packPointer++;
-  }
-  if(!m_running)
-    m_running = m_samples.getData() > 300U;//75ms of audio
-}
-
-bool CFMUpSampler::getSample(q15_t& sample)
-{
-  if(!m_running)
-    return false;
-
-  switch (m_upSampleIndex)
-  {
-  case 0: {
-    TSamplePairPack pairPack;
-    if(!m_samples.get(pairPack)) {
-      m_running = false;
-      return false;
-    }
-      
-    m_pack = 0U;
-    m_packPointer = (uint8_t*)&m_pack;
-
-    m_packPointer[0U] = pairPack.byte0;
-    m_packPointer[1U] = pairPack.byte1;
-    m_packPointer[2U] = pairPack.byte2;
-
-    sample = q15_t(m_pack >> 12) - 2048;
-    break;
-  }
-  case 3:
-    sample = q15_t(m_pack & FM_UPSAMPLE_MASK) - 2048;
-  break;
-  default:
-    sample = 0;
-  break;
-  }
-
-  m_upSampleIndex++;
-  if(m_upSampleIndex >= 6U)
-    m_upSampleIndex = 0U;
-
-  return true;
-}
-
-uint16_t CFMUpSampler::getSpace() const
-{
-  //return available space in bytes
-  return m_samples.getSpace() * sizeof(TSamplePairPack);
-}

FMUpSampler.h

@@ -1,48 +0,0 @@
-/*
- *   Copyright (C) 2020 by Jonathan Naylor G4KLX
- *   Copyright (C) 2020 by Geoffrey Merck F4FXL - KC3FRA
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-
-#if !defined(FMUPSAMPLER_H)
-#define FMUPSAMPLER_H
-
-#include "Config.h"
-#include "RingBuffer.h"
-#include "FMSamplePairPack.h"
-
-class CFMUpSampler {
-public:
-  CFMUpSampler();
-
-  void reset();
-
-  void addData(const uint8_t* data, uint16_t length);
-
-  bool getSample(q15_t& sample);
-
-  uint16_t getSpace() const;
-
-private:
-  uint8_t m_upSampleIndex;
-  uint32_t m_pack;
-  uint8_t * m_packPointer;
-  CRingBuffer<TSamplePairPack> m_samples;
-  bool m_running;
-};
-
-#endif

Globals.h

@@ -28,7 +28,6 @@
 #include "STM32Utils.h"
 #else
 #include <Arduino.h>
-#undef PI //Undefine PI to get rid of annoying warning as it is also defined in arm_math.h.
 #endif
 
 #if defined(__SAM3X8E__) || defined(STM32F105xC)

IO.cpp

@@ -26,31 +26,12 @@
 static q31_t   DC_FILTER[] = {3367972, 0, 3367972, 0, 2140747704, 0}; // {b0, 0, b1, b2, -a1, -a2}
 const uint32_t DC_FILTER_STAGES = 1U; // One Biquad stage
 
-// Generated using rcosdesign(0.2, 8, 5, 'sqrt') in MATLAB
-static q15_t RRC_0_2_FILTER[] = {401, 104, -340, -731, -847, -553, 112, 909, 1472, 1450, 683, -675, -2144, -3040, -2706, -770, 2667, 6995,
-                                 11237, 14331, 15464, 14331, 11237, 6995, 2667, -770, -2706, -3040, -2144, -675, 683, 1450, 1472, 909, 112,
-                                 -553, -847, -731, -340, 104, 401, 0};
-const uint16_t RRC_0_2_FILTER_LEN = 42U;
+// One symbol boxcar filters
+static q15_t   BOXCAR5_FILTER[] = {12000, 12000, 12000, 12000, 12000, 0};
+const uint16_t BOXCAR5_FILTER_LEN = 6U;
 
-// Generated using rcosdesign(0.2, 8, 10, 'sqrt') in MATLAB
-static q15_t NXDN_0_2_FILTER[] = {284, 198, 73, -78, -240, -393, -517, -590, -599, -533, -391, -181, 79, 364, 643, 880, 1041, 1097, 1026, 819,
-                                  483, 39, -477, -1016, -1516, -1915, -2150, -2164, -1914, -1375, -545, 557, 1886, 3376, 4946, 6502, 7946, 9184,
-                                  10134, 10731, 10935, 10731, 10134, 9184, 7946, 6502, 4946, 3376, 1886, 557, -545, -1375, -1914, -2164, -2150,
-                                  -1915, -1516, -1016, -477, 39, 483, 819, 1026, 1097, 1041, 880, 643, 364, 79, -181, -391, -533, -599, -590,
-                                  -517, -393, -240, -78, 73, 198, 284, 0};
-const uint16_t NXDN_0_2_FILTER_LEN = 82U;
-
-static q15_t NXDN_ISINC_FILTER[] = {790, -1085, -1073, -553, 747, 2341, 3156, 2152, -893, -4915, -7834, -7536, -3102, 4441, 12354, 17394, 17394,
-                                   12354, 4441, -3102, -7536, -7834, -4915, -893, 2152, 3156, 2341, 747, -553, -1073, -1085, 790};
-const uint16_t NXDN_ISINC_FILTER_LEN = 32U;
-
-// Generated using gaussfir(0.5, 4, 5) in MATLAB
-static q15_t   GAUSSIAN_0_5_FILTER[] = {8, 104, 760, 3158, 7421, 9866, 7421, 3158, 760, 104, 8, 0};
-const uint16_t GAUSSIAN_0_5_FILTER_LEN = 12U;
-
-// One symbol boxcar filter
-static q15_t   BOXCAR_FILTER[] = {12000, 12000, 12000, 12000, 12000, 0};
-const uint16_t BOXCAR_FILTER_LEN = 6U;
+static q15_t   BOXCAR10_FILTER[] = {6000, 6000, 6000, 6000, 6000, 6000, 6000, 6000, 6000, 6000};
+const uint16_t BOXCAR10_FILTER_LEN = 10U;
 
 const uint16_t DC_OFFSET = 2048U;
 
@@ -61,16 +42,10 @@ m_txBuffer(TX_RINGBUFFER_SIZE),
 m_rssiBuffer(RX_RINGBUFFER_SIZE),
 m_dcFilter(),
 m_dcState(),
-m_rrcFilter(),
-m_gaussianFilter(),
-m_boxcarFilter(),
-m_nxdnFilter(),
-m_nxdnISincFilter(),
-m_rrcState(),
-m_gaussianState(),
-m_boxcarState(),
-m_nxdnState(),
-m_nxdnISincState(),
+m_boxcar5Filter(),
+m_boxcar10Filter(),
+m_boxcar5State(),
+m_boxcar10State(),
 m_pttInvert(false),
 m_rxLevel(128 * 128),
 m_cwIdTXLevel(128 * 128),
@@ -91,37 +66,22 @@ m_dacOverflow(0U),
 m_watchdog(0U),
 m_lockout(false)
 {
-  ::memset(m_rrcState,      0x00U,  70U * sizeof(q15_t));
-  ::memset(m_gaussianState, 0x00U,  40U * sizeof(q15_t));
-  ::memset(m_boxcarState,   0x00U,  30U * sizeof(q15_t));
-  ::memset(m_nxdnState,     0x00U, 110U * sizeof(q15_t));
-  ::memset(m_nxdnISincState, 0x00U, 60U * sizeof(q15_t));
-  ::memset(m_dcState,       0x00U,   4U * sizeof(q31_t));
+  ::memset(m_boxcar5State,  0x00U, 30U * sizeof(q15_t));
+  ::memset(m_boxcar10State, 0x00U, 40U * sizeof(q15_t));
+  ::memset(m_dcState,       0x00U,  4U * sizeof(q31_t));
 
   m_dcFilter.numStages = DC_FILTER_STAGES;
   m_dcFilter.pState    = m_dcState;
   m_dcFilter.pCoeffs   = DC_FILTER;
   m_dcFilter.postShift = 0;
 
-  m_rrcFilter.numTaps = RRC_0_2_FILTER_LEN;
-  m_rrcFilter.pState  = m_rrcState;
-  m_rrcFilter.pCoeffs = RRC_0_2_FILTER;
+  m_boxcar5Filter.numTaps = BOXCAR5_FILTER_LEN;
+  m_boxcar5Filter.pState  = m_boxcar5State;
+  m_boxcar5Filter.pCoeffs = BOXCAR5_FILTER;
 
-  m_gaussianFilter.numTaps = GAUSSIAN_0_5_FILTER_LEN;
-  m_gaussianFilter.pState  = m_gaussianState;
-  m_gaussianFilter.pCoeffs = GAUSSIAN_0_5_FILTER;
-
-  m_boxcarFilter.numTaps = BOXCAR_FILTER_LEN;
-  m_boxcarFilter.pState  = m_boxcarState;
-  m_boxcarFilter.pCoeffs = BOXCAR_FILTER;
-  
-  m_nxdnFilter.numTaps = NXDN_0_2_FILTER_LEN;
-  m_nxdnFilter.pState  = m_nxdnState;
-  m_nxdnFilter.pCoeffs = NXDN_0_2_FILTER;
-  
-  m_nxdnISincFilter.numTaps = NXDN_ISINC_FILTER_LEN;
-  m_nxdnISincFilter.pState  = m_nxdnISincState;
-  m_nxdnISincFilter.pCoeffs = NXDN_ISINC_FILTER;
+  m_boxcar10Filter.numTaps = BOXCAR10_FILTER_LEN;
+  m_boxcar10Filter.pState  = m_boxcar10State;
+  m_boxcar10Filter.pCoeffs = BOXCAR10_FILTER;
 
   initInt();
   
@@ -264,7 +224,6 @@ void CIO::process()
   if (m_txBuffer.getData() == 0U && m_tx) {
     m_tx = false;
     setPTTInt(m_pttInvert ? true : false);
-    DEBUG1("TX OFF");
   }
 
   if (m_rxBuffer.getData() >= RX_BLOCK_SIZE) {
@@ -273,16 +232,15 @@ void CIO::process()
     uint16_t rssi[RX_BLOCK_SIZE];
 
     for (uint16_t i = 0U; i < RX_BLOCK_SIZE; i++) {
-      TSample sample;
-      m_rxBuffer.get(sample);
-      control[i] = sample.control;
+      uint16_t sample;
+      m_rxBuffer.get(sample, control[i]);
       m_rssiBuffer.get(rssi[i]);
 
       // Detect ADC overflow
-      if (m_detect && (sample.sample == 0U || sample.sample == 4095U))
+      if (m_detect && (sample == 0U || sample == 4095U))
         m_adcOverflow++;
 
-      q15_t res1 = q15_t(sample.sample) - m_rxDCOffset;
+      q15_t res1 = q15_t(sample) - m_rxDCOffset;
       q31_t res2 = res1 * m_rxLevel;
       samples[i] = q15_t(__SSAT((res2 >> 15), 16));
     }
@@ -310,54 +268,37 @@ void CIO::process()
 #endif
 
     if (m_modemState == STATE_IDLE) {
-      if (m_dstarEnable) {
-        q15_t GMSKVals[RX_BLOCK_SIZE];
-#if defined(USE_DCBLOCKER)
-        ::arm_fir_fast_q15(&m_gaussianFilter, dcSamples, GMSKVals, RX_BLOCK_SIZE);
-#else
-        ::arm_fir_fast_q15(&m_gaussianFilter, samples, GMSKVals, RX_BLOCK_SIZE);
-#endif
-        dstarRX.samples(GMSKVals, rssi, RX_BLOCK_SIZE);
-      }
+      if (m_dstarEnable || m_dmrEnable || m_ysfEnable || m_p25Enable) {
+        q15_t vals[RX_BLOCK_SIZE];
+        ::arm_fir_fast_q15(&m_boxcar5Filter, samples, vals, RX_BLOCK_SIZE);
 
-      if (m_p25Enable) {
-        q15_t P25Vals[RX_BLOCK_SIZE];
-#if defined(USE_DCBLOCKER)
-        ::arm_fir_fast_q15(&m_boxcarFilter, dcSamples, P25Vals, RX_BLOCK_SIZE);
-#else
-        ::arm_fir_fast_q15(&m_boxcarFilter, samples, P25Vals, RX_BLOCK_SIZE);
-#endif
-        p25RX.samples(P25Vals, rssi, RX_BLOCK_SIZE);
-      }
+        if (m_dstarEnable)
+          dstarRX.samples(vals, rssi, RX_BLOCK_SIZE);
 
-      if (m_nxdnEnable) {
-        q15_t NXDNValsTmp[RX_BLOCK_SIZE];
-#if defined(USE_DCBLOCKER)
-        ::arm_fir_fast_q15(&m_nxdnFilter, dcSamples, NXDNValsTmp, RX_BLOCK_SIZE);
-#else
-        ::arm_fir_fast_q15(&m_nxdnFilter, samples, NXDNValsTmp, RX_BLOCK_SIZE);
-#endif
-        q15_t NXDNVals[RX_BLOCK_SIZE];
-        ::arm_fir_fast_q15(&m_nxdnISincFilter, NXDNValsTmp, NXDNVals, RX_BLOCK_SIZE);
-
-        nxdnRX.samples(NXDNVals, rssi, RX_BLOCK_SIZE);
-      }
-
-      if (m_dmrEnable || m_ysfEnable) {
-        q15_t RRCVals[RX_BLOCK_SIZE];
-        ::arm_fir_fast_q15(&m_rrcFilter, samples, RRCVals, RX_BLOCK_SIZE);
+        if (m_p25Enable)
+          p25RX.samples(vals, rssi, RX_BLOCK_SIZE);
 
         if (m_ysfEnable)
-          ysfRX.samples(RRCVals, rssi, RX_BLOCK_SIZE);
+          ysfRX.samples(vals, rssi, RX_BLOCK_SIZE);
 
         if (m_dmrEnable) {
           if (m_duplex)
-            dmrIdleRX.samples(RRCVals, RX_BLOCK_SIZE);
+            dmrIdleRX.samples(vals, RX_BLOCK_SIZE);
           else
-            dmrDMORX.samples(RRCVals, rssi, RX_BLOCK_SIZE);
+            dmrDMORX.samples(vals, rssi, RX_BLOCK_SIZE);
         }
       }
 
+      if (m_nxdnEnable) {
+        q15_t vals[RX_BLOCK_SIZE];
+#if defined(USE_DCBLOCKER)
+        ::arm_fir_fast_q15(&m_boxcar10Filter, dcSamples, vals, RX_BLOCK_SIZE);
+#else
+        ::arm_fir_fast_q15(&m_boxcar10Filter, samples, vals, RX_BLOCK_SIZE);
+#endif
+        nxdnRX.samples(vals, rssi, RX_BLOCK_SIZE);
+      }
+
       if (m_fmEnable) {
         bool cos = getCOSInt();
 #if defined(USE_DCBLOCKER)
@@ -368,61 +309,59 @@ void CIO::process()
       }
     } else if (m_modemState == STATE_DSTAR) {
       if (m_dstarEnable) {
-        q15_t GMSKVals[RX_BLOCK_SIZE];
+        q15_t vals[RX_BLOCK_SIZE];
 #if defined(USE_DCBLOCKER)
-        ::arm_fir_fast_q15(&m_gaussianFilter, dcSamples, GMSKVals, RX_BLOCK_SIZE);
+        ::arm_fir_fast_q15(&m_boxcar5Filter, dcSamples, vals, RX_BLOCK_SIZE);
 #else
-        ::arm_fir_fast_q15(&m_gaussianFilter, samples, GMSKVals, RX_BLOCK_SIZE);
+        ::arm_fir_fast_q15(&m_boxcar5Filter, samples, vals, RX_BLOCK_SIZE);
 #endif
-        dstarRX.samples(GMSKVals, rssi, RX_BLOCK_SIZE);
+
+        dstarRX.samples(vals, rssi, RX_BLOCK_SIZE);
       }
     } else if (m_modemState == STATE_DMR) {
       if (m_dmrEnable) {
-        q15_t DMRVals[RX_BLOCK_SIZE];
-        ::arm_fir_fast_q15(&m_rrcFilter, samples, DMRVals, RX_BLOCK_SIZE);
+        q15_t vals[RX_BLOCK_SIZE];
+        ::arm_fir_fast_q15(&m_boxcar5Filter, samples, vals, RX_BLOCK_SIZE);
 
         if (m_duplex) {
           // If the transmitter isn't on, use the DMR idle RX to detect the wakeup CSBKs
           if (m_tx)
-            dmrRX.samples(DMRVals, rssi, control, RX_BLOCK_SIZE);
+            dmrRX.samples(vals, rssi, control, RX_BLOCK_SIZE);
           else
-            dmrIdleRX.samples(DMRVals, RX_BLOCK_SIZE);
+            dmrIdleRX.samples(vals, RX_BLOCK_SIZE);
         } else {
-          dmrDMORX.samples(DMRVals, rssi, RX_BLOCK_SIZE);
+          dmrDMORX.samples(vals, rssi, RX_BLOCK_SIZE);
         }
       }
     } else if (m_modemState == STATE_YSF) {
       if (m_ysfEnable) {
-        q15_t YSFVals[RX_BLOCK_SIZE];
+        q15_t vals[RX_BLOCK_SIZE];
 #if defined(USE_DCBLOCKER)
-        ::arm_fir_fast_q15(&m_rrcFilter, dcSamples, YSFVals, RX_BLOCK_SIZE);
+        ::arm_fir_fast_q15(&m_boxcar5Filter, dcSamples, vals, RX_BLOCK_SIZE);
 #else
-        ::arm_fir_fast_q15(&m_rrcFilter, samples, YSFVals, RX_BLOCK_SIZE);
+        ::arm_fir_fast_q15(&m_boxcar5Filter, samples, vals, RX_BLOCK_SIZE);
 #endif
-        ysfRX.samples(YSFVals, rssi, RX_BLOCK_SIZE);
+        ysfRX.samples(vals, rssi, RX_BLOCK_SIZE);
       }
     } else if (m_modemState == STATE_P25) {
       if (m_p25Enable) {
-        q15_t P25Vals[RX_BLOCK_SIZE];
+        q15_t vals[RX_BLOCK_SIZE];
 #if defined(USE_DCBLOCKER)
-        ::arm_fir_fast_q15(&m_boxcarFilter, dcSamples, P25Vals, RX_BLOCK_SIZE);
+        ::arm_fir_fast_q15(&m_boxcar5Filter, dcSamples, vals, RX_BLOCK_SIZE);
 #else
-        ::arm_fir_fast_q15(&m_boxcarFilter, samples, P25Vals, RX_BLOCK_SIZE);
+        ::arm_fir_fast_q15(&m_boxcar5Filter, samples, vals, RX_BLOCK_SIZE);
 #endif
-        p25RX.samples(P25Vals, rssi, RX_BLOCK_SIZE);
+        p25RX.samples(vals, rssi, RX_BLOCK_SIZE);
       }
-    } else if (m_modemState == STATE_NXDN) {
+	} else if (m_modemState == STATE_NXDN) {
       if (m_nxdnEnable) {
-        q15_t NXDNValsTmp[RX_BLOCK_SIZE];
+        q15_t vals[RX_BLOCK_SIZE];
 #if defined(USE_DCBLOCKER)
-        ::arm_fir_fast_q15(&m_nxdnFilter, dcSamples, NXDNValsTmp, RX_BLOCK_SIZE);
+        ::arm_fir_fast_q15(&m_boxcar10Filter, dcSamples, vals, RX_BLOCK_SIZE);
 #else
-        ::arm_fir_fast_q15(&m_nxdnFilter, samples, NXDNValsTmp, RX_BLOCK_SIZE);
+        ::arm_fir_fast_q15(&m_boxcar10Filter, samples, vals, RX_BLOCK_SIZE);
 #endif
-        q15_t NXDNVals[RX_BLOCK_SIZE];
-        ::arm_fir_fast_q15(&m_nxdnISincFilter, NXDNValsTmp, NXDNVals, RX_BLOCK_SIZE);
-
-        nxdnRX.samples(NXDNVals, rssi, RX_BLOCK_SIZE);
+        nxdnRX.samples(vals, rssi, RX_BLOCK_SIZE);
       }
     } else if (m_modemState == STATE_FM) {
       bool cos = getCOSInt();
@@ -432,10 +371,13 @@ void CIO::process()
       fm.samples(cos, samples, RX_BLOCK_SIZE);
 #endif
     } else if (m_modemState == STATE_DSTARCAL) {
-      q15_t GMSKVals[RX_BLOCK_SIZE];
-      ::arm_fir_fast_q15(&m_gaussianFilter, samples, GMSKVals, RX_BLOCK_SIZE);
-
-      calDStarRX.samples(GMSKVals, RX_BLOCK_SIZE);
+      q15_t vals[RX_BLOCK_SIZE];
+#if defined(USE_DCBLOCKER)
+      ::arm_fir_fast_q15(&m_boxcar5Filter, dcSamples, vals, RX_BLOCK_SIZE);
+#else
+      ::arm_fir_fast_q15(&m_boxcar5Filter, samples, vals, RX_BLOCK_SIZE);
+#endif
+      calDStarRX.samples(vals, RX_BLOCK_SIZE);
     } else if (m_modemState == STATE_RSSICAL) {
       calRSSI.samples(rssi, RX_BLOCK_SIZE);
     }
@@ -454,7 +396,6 @@ void CIO::write(MMDVM_STATE mode, q15_t* samples, uint16_t length, const uint8_t
   if (!m_tx) {
     m_tx = true;
     setPTTInt(m_pttInvert ? false : true);
-    DEBUG1("TX ON");
   }
 
   q15_t txLevel = 0;
@@ -495,9 +436,9 @@ void CIO::write(MMDVM_STATE mode, q15_t* samples, uint16_t length, const uint8_t
       m_dacOverflow++;
 
     if (control == NULL)
-      m_txBuffer.put({res3, MARK_NONE});
+      m_txBuffer.put(res3, MARK_NONE);
     else
-      m_txBuffer.put({res3, control[i]});
+      m_txBuffer.put(res3, control[i]);
   }
 }
 

IO.h

@@ -21,12 +21,8 @@
 
 #include "Globals.h"
 
-#include "RingBuffer.h"
-
-struct TSample {
-  volatile uint16_t sample;
-  volatile uint8_t control;
-};
+#include "SampleRB.h"
+#include "RSSIRB.h"
 
 class CIO {
 public:
@@ -61,25 +57,19 @@ public:
   void selfTest();
 
 private:
-  bool                  m_started;
+  bool                 m_started;
 
-  CRingBuffer<TSample>  m_rxBuffer;
-  CRingBuffer<TSample>  m_txBuffer;
-  CRingBuffer<uint16_t> m_rssiBuffer;
+  CSampleRB            m_rxBuffer;
+  CSampleRB            m_txBuffer;
+  CRSSIRB              m_rssiBuffer;
 
   arm_biquad_casd_df1_inst_q31 m_dcFilter;
   q31_t                        m_dcState[4];
 
-  arm_fir_instance_q15 m_rrcFilter;
-  arm_fir_instance_q15 m_gaussianFilter;
-  arm_fir_instance_q15 m_boxcarFilter;
-  arm_fir_instance_q15 m_nxdnFilter;
-  arm_fir_instance_q15 m_nxdnISincFilter;
-  q15_t                m_rrcState[70U];           // NoTaps + BlockSize - 1, 42 + 20 - 1 plus some spare
-  q15_t                m_gaussianState[40U];      // NoTaps + BlockSize - 1, 12 + 20 - 1 plus some spare
-  q15_t                m_boxcarState[30U];        // NoTaps + BlockSize - 1, 6 + 20 - 1 plus some spare
-  q15_t                m_nxdnState[110U];         // NoTaps + BlockSize - 1, 82 + 20 - 1 plus some spare
-  q15_t                m_nxdnISincState[60U];     // NoTaps + BlockSize - 1, 32 + 20 - 1 plus some spare
+  arm_fir_instance_q15 m_boxcar5Filter;
+  arm_fir_instance_q15 m_boxcar10Filter;
+  q15_t                m_boxcar5State[30U];        // NoTaps + BlockSize - 1, 6 + 20 - 1 plus some spare
+  q15_t                m_boxcar10State[40U];       // NoTaps + BlockSize - 1, 10 + 20 - 1 plus some spare
 
   bool                 m_pttInvert;
   q15_t                m_rxLevel;

IODue.cpp

@@ -185,13 +185,14 @@ void CIO::startInt()
 void CIO::interrupt()
 {
   if ((ADC->ADC_ISR & ADC_ISR_EOC_Chan) == ADC_ISR_EOC_Chan) {    // Ensure there was an End-of-Conversion and we read the ISR reg
-    TSample sample = {DC_OFFSET, MARK_NONE};
+    uint8_t control = MARK_NONE;
+    uint16_t sample = DC_OFFSET;
 
-    m_txBuffer.get(sample);
-    DACC->DACC_CDR = sample.sample;
+    m_txBuffer.get(sample, control);
+    DACC->DACC_CDR = sample;
 
-    sample.sample = ADC->ADC_CDR[ADC_CDR_Chan];
-    m_rxBuffer.put(sample);
+    sample = ADC->ADC_CDR[ADC_CDR_Chan];
+    m_rxBuffer.put(sample, control);
 
 #if defined(SEND_RSSI_DATA)
     m_rssiBuffer.put(ADC->ADC_CDR[RSSI_CDR_Chan]);

IOSTM.cpp

@@ -326,24 +326,25 @@ void CIO::startInt()
 
 void CIO::interrupt()
 {
-   TSample sample = {DC_OFFSET, MARK_NONE};
+   uint8_t control  = MARK_NONE;
+   uint16_t sample  = DC_OFFSET;
    uint16_t rawRSSI = 0U;
 
-   m_txBuffer.get(sample);
+   m_txBuffer.get(sample, control);
 
    // Send the value to the DAC
 #if defined(STM32F4_NUCLEO) && defined(STM32F4_NUCLEO_ARDUINO_HEADER)
-   DAC_SetChannel2Data(DAC_Align_12b_R, sample.sample);
+   DAC_SetChannel2Data(DAC_Align_12b_R, sample);
 #else
-   DAC_SetChannel1Data(DAC_Align_12b_R, sample.sample);
+   DAC_SetChannel1Data(DAC_Align_12b_R, sample);
 #endif
 
    // Read value from ADC1 and ADC2
    if ((ADC_GetFlagStatus(ADC1, ADC_FLAG_EOC) == RESET)) {
       // shouldn't be still in reset at this point so null the sample value?
-      sample.sample  = 0U;
+      sample  = 0U;
    } else {
-      sample.sample  = ADC_GetConversionValue(ADC1);
+      sample  = ADC_GetConversionValue(ADC1);
 #if defined(SEND_RSSI_DATA)
       rawRSSI = ADC_GetConversionValue(ADC2);
 #endif
@@ -353,7 +354,7 @@ void CIO::interrupt()
    ADC_ClearFlag(ADC1, ADC_FLAG_EOC);
    ADC_SoftwareStartConv(ADC1);
 
-   m_rxBuffer.put(sample);
+   m_rxBuffer.put(sample, control);
    m_rssiBuffer.put(rawRSSI);
 
    m_watchdog++;

IOSTM_CMSIS.cpp

@@ -397,7 +397,8 @@ void CIO::startInt()
 
 void CIO::interrupt()
 {
-  TSample sample = {DC_OFFSET, MARK_NONE};
+  uint8_t control  = MARK_NONE;
+  uint16_t sample  = DC_OFFSET;
 #if defined(SEND_RSSI_DATA)
   uint16_t rawRSSI = 0U;
 #endif
@@ -414,12 +415,12 @@ void CIO::interrupt()
     *rssi_adon = 1;
 #endif
     
-    m_txBuffer.get(sample);
-    DAC->DHR12R1 = sample.sample;  // Send the value to the DAC
+    m_txBuffer.get(sample, control);
+    DAC->DHR12R1 = sample;  // Send the value to the DAC
 
     // Read value from ADC1 and ADC2
-    sample.sample  = ADC1->DR;   // read conversion result; EOC is cleared by this read
-    m_rxBuffer.put(sample);
+    sample  = ADC1->DR;   // read conversion result; EOC is cleared by this read
+    m_rxBuffer.put(sample, control);
 #if defined(SEND_RSSI_DATA)
     rawRSSI = ADC2->DR;
     m_rssiBuffer.put(rawRSSI);

IOTeensy.cpp

@@ -161,14 +161,15 @@ void CIO::startInt()
 
 void CIO::interrupt()
 {
-   TSample sample = {DC_OFFSET, MARK_NONE};
+  uint8_t control = MARK_NONE;
+  uint16_t sample = DC_OFFSET;
 
-  m_txBuffer.get(sample);
-  *(int16_t *)&(DAC0_DAT0L) = sample.sample;
+  m_txBuffer.get(sample, control);
+  *(int16_t *)&(DAC0_DAT0L) = sample;
 
   if ((ADC0_SC1A & ADC_SC1_COCO) == ADC_SC1_COCO) {
-    sample.sample = ADC0_RA;
-    m_rxBuffer.put(sample);
+    sample = ADC0_RA;
+    m_rxBuffer.put(sample, control);
   }
     
 #if defined(SEND_RSSI_DATA)

Makefile

@@ -155,7 +155,7 @@ LDFLAGS_F722 =-T stm32f722_link.ld $(MCFLAGS_F7) --specs=nosys.specs $(INCLUDES_
 # Common flags
 CFLAGS=-Os -ffunction-sections -fdata-sections -fno-builtin -Wno-implicit -DCUSTOM_NEW -DNO_EXCEPTIONS
 CXXFLAGS=-Os -fno-exceptions -ffunction-sections -fdata-sections -fno-builtin -fno-rtti -DCUSTOM_NEW -DNO_EXCEPTIONS
-LDFLAGS=-Os --specs=nano.specs
+LDFLAGS=-Os --specs=nano.specs -Wl,-Map=bin/mmdvm.map
 
 # Build Rules
 .PHONY: all release dis pi pi-f722 f4m nucleo f767 dvm drcc_nqf clean

Makefile.Arduino

@@ -1,5 +1,5 @@
 #!/usr/bin/make
-# makefile for the arduino due (works with arduino IDE 1.6.12)
+# makefile for the arduino due (works with arduino IDE 1.6.11)
 #
 # The original file can be found at https://github.com/pauldreik/arduino-due-makefile
 #
@@ -34,7 +34,7 @@ OBJCOPY:=$(ADIR)/packages/arduino/tools/arm-none-eabi-gcc/4.8.3-2014q1/bin/arm-n
 
 C:=$(CC)
 #SAM:=arduino/sam/
-SAM:=$(ADIR)/packages/arduino/hardware/sam/1.6.12
+SAM:=$(ADIR)/packages/arduino/hardware/sam/1.6.11
 #CMSIS:=arduino/sam/system/CMSIS/
 #LIBSAM:=arduino/sam/system/libsam
 TMPDIR:=$(PWD)/build

NXDNTX.cpp

@@ -81,8 +81,7 @@ void CNXDNTX::process()
       m_poBuffer[m_poLen++] = NXDN_PREAMBLE[2U];
     } else {
       for (uint8_t i = 0U; i < NXDN_FRAME_LENGTH_BYTES; i++) {
-        uint8_t c = 0U;
-        m_buffer.get(c);
+        uint8_t c = m_buffer.get();
         m_poBuffer[m_poLen++] = c;
       }
     }

NXDNTX.h

@@ -21,7 +21,7 @@
 
 #include "Config.h"
 
-#include "RingBuffer.h"
+#include "SerialRB.h"
 
 class CNXDNTX {
 public:
@@ -38,7 +38,7 @@ public:
   void setParams(uint8_t txHang);
 
 private:
-  CRingBuffer<uint8_t>                        m_buffer;
+  CSerialRB                        m_buffer;
   arm_fir_interpolate_instance_q15 m_modFilter;
   arm_fir_instance_q15             m_sincFilter;
   q15_t                            m_modState[16U];    // blockSize + phaseLength - 1, 4 + 9 - 1 plus some spare

P25TX.cpp

@@ -75,11 +75,9 @@ void CP25TX::process()
       for (uint16_t i = 0U; i < m_txDelay; i++)
         m_poBuffer[m_poLen++] = P25_START_SYNC;
     } else {
-      uint8_t length;
-      m_buffer.get(length);
+      uint8_t length = m_buffer.get();
       for (uint8_t i = 0U; i < length; i++) {
-        uint8_t c = 0U;
-        m_buffer.get(c);
+        uint8_t c = m_buffer.get();
         m_poBuffer[m_poLen++] = c;
       }
     }

P25TX.h

@@ -21,7 +21,7 @@
 
 #include "Config.h"
 
-#include "RingBuffer.h"
+#include "SerialRB.h"
 
 class CP25TX {
 public:
@@ -38,7 +38,7 @@ public:
   void setParams(uint8_t txHang);
 
 private:
-  CRingBuffer<uint8_t>                        m_buffer;
+  CSerialRB                        m_buffer;
   arm_fir_interpolate_instance_q15 m_modFilter;
   arm_fir_instance_q15             m_lpFilter;
   q15_t                            m_modState[16U];    // blockSize + phaseLength - 1, 4 + 9 - 1 plus some spare

POCSAGTX.cpp

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2009-2018,2020 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2009-2018 by Jonathan Naylor G4KLX
  *
  *   This program is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by
@@ -61,8 +61,7 @@ void CPOCSAGTX::process()
         m_poBuffer[m_poLen++] = POCSAG_SYNC;
     } else {
       for (uint8_t i = 0U; i < POCSAG_FRAME_LENGTH_BYTES; i++) {
-        uint8_t c = 0U;
-        m_buffer.get(c);
+        uint8_t c = m_buffer.get();
         m_poBuffer[m_poLen++] = c;
       }
     }
@@ -147,3 +146,4 @@ uint8_t CPOCSAGTX::getSpace() const
 {
   return m_buffer.getSpace() / POCSAG_FRAME_LENGTH_BYTES;
 }
+

POCSAGTX.h

@@ -21,7 +21,7 @@
 
 #include "Config.h"
 
-#include "RingBuffer.h"
+#include "SerialRB.h"
 
 class CPOCSAGTX {
 public:
@@ -40,7 +40,7 @@ public:
   bool busy();
 
 private:
-  CRingBuffer<uint8_t>            m_buffer;
+  CSerialRB            m_buffer;
   arm_fir_instance_q15 m_modFilter;
   q15_t                m_modState[170U];     // NoTaps + BlockSize - 1, 6 + 160 - 1 plus some spare
   uint8_t              m_poBuffer[200U];

RSSIRB.cpp

@@ -0,0 +1,102 @@
+/*
+TX fifo control - Copyright (C) KI6ZUM 2015
+Copyright (C) 2015,2016 by Jonathan Naylor G4KLX
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Library General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+Library General Public License for more details.
+
+You should have received a copy of the GNU Library General Public
+License along with this library; if not, write to the
+Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
+Boston, MA  02110-1301, USA.
+*/
+
+#include "RSSIRB.h"
+
+CRSSIRB::CRSSIRB(uint16_t length) :
+m_length(length),
+m_head(0U),
+m_tail(0U),
+m_full(false),
+m_overflow(false)
+{
+  m_rssi = new uint16_t[length];
+}
+
+uint16_t CRSSIRB::getSpace() const
+{
+  uint16_t n = 0U;
+
+  if (m_tail == m_head)
+    n = m_full ? 0U : m_length;
+  else if (m_tail < m_head)
+    n = m_length - m_head + m_tail;
+  else
+    n = m_tail - m_head;
+
+  if (n > m_length)
+    n = 0U;
+
+  return n;
+}
+
+uint16_t CRSSIRB::getData() const
+{
+  if (m_tail == m_head)
+    return m_full ? m_length : 0U;
+  else if (m_tail < m_head)
+    return m_head - m_tail;
+  else
+    return m_length - m_tail + m_head;
+}
+
+bool CRSSIRB::put(uint16_t rssi)
+{
+  if (m_full) {
+    m_overflow = true;
+    return false;
+  }
+
+  m_rssi[m_head] = rssi;
+
+  m_head++;
+  if (m_head >= m_length)
+    m_head = 0U;
+
+  if (m_head == m_tail)
+    m_full = true;
+
+  return true;
+}
+
+bool CRSSIRB::get(uint16_t& rssi)
+{
+  if (m_head == m_tail && !m_full)
+    return false;
+
+  rssi  = m_rssi[m_tail];
+
+  m_full = false;
+
+  m_tail++;
+  if (m_tail >= m_length)
+    m_tail = 0U;
+
+  return true;
+}
+
+bool CRSSIRB::hasOverflowed()
+{
+  bool overflow = m_overflow;
+
+  m_overflow = false;
+
+  return overflow;
+}

RSSIRB.h

@@ -0,0 +1,59 @@
+/*
+Serial fifo control - Copyright (C) KI6ZUM 2015
+Copyright (C) 2015,2016 by Jonathan Naylor G4KLX
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Library General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+Library General Public License for more details.
+
+You should have received a copy of the GNU Library General Public
+License along with this library; if not, write to the
+Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
+Boston, MA  02110-1301, USA.
+*/
+
+#if !defined(RSSIRB_H)
+#define  RSSIRB_H
+
+#if defined(STM32F4XX)
+#include "stm32f4xx.h"
+#elif defined(STM32F7XX)
+#include "stm32f7xx.h"
+#elif defined(STM32F105xC)
+#include "stm32f1xx.h"
+#include <cstddef>
+#else
+#include <Arduino.h>
+#endif
+
+class CRSSIRB {
+public:
+  CRSSIRB(uint16_t length);
+  
+  uint16_t getSpace() const;
+  
+  uint16_t getData() const;
+
+  bool put(uint16_t rssi);
+
+  bool get(uint16_t& rssi);
+
+  bool hasOverflowed();
+
+private:
+  uint16_t           m_length;
+  volatile uint16_t* m_rssi;
+  volatile uint16_t  m_head;
+  volatile uint16_t  m_tail;
+  volatile bool      m_full;
+  bool               m_overflow;
+};
+
+#endif
+

STMUART.cpp

@@ -1,100 +0,0 @@
-/*
- *   Copyright (c) 2020 by Jonathan Naylor G4KLX
- *   Copyright (c) 2020 by Geoffrey Merck F4FXL - KC3FRA   
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#if defined(STM32F4XX) || defined(STM32F7XX)
-
-#include "STMUART.h"
-
-CSTMUART::CSTMUART() :
-m_usart(NULL)
-{
-
-}
-
-void CSTMUART::init(USART_TypeDef* usart)
-{
-  m_usart = usart;
-}
-
-void CSTMUART::write(const uint8_t * data, uint16_t length)
-{
-  if(length == 0U || m_usart == NULL)
-    return;
-
-
-  m_txFifo.put(data[0]);
-  USART_ITConfig(m_usart, USART_IT_TXE, ENABLE);//switch TX IRQ is on
-
-  for(uint16_t i = 1U; i < length; i++) {
-    m_txFifo.put(data[i]);
-  }
-
-  USART_ITConfig(m_usart, USART_IT_TXE, ENABLE);//make sure TX IRQ is on
-}
-
-uint8_t CSTMUART::read()
-{
-  return m_rxFifo.get();
-}
-
-void CSTMUART::handleIRQ()
-{
-  if(m_usart == NULL)
-    return;
-
-  if (USART_GetITStatus(m_usart, USART_IT_RXNE)) {
-    if(!m_rxFifo.isFull())
-      m_rxFifo.put((uint8_t) USART_ReceiveData(m_usart));
-    USART_ClearITPendingBit(USART1, USART_IT_RXNE);
-  }
-
-  if (USART_GetITStatus(m_usart, USART_IT_TXE)) {
-    if(!m_txFifo.isEmpty())
-      USART_SendData(m_usart, m_txFifo.get());
-
-    USART_ClearITPendingBit(m_usart, USART_IT_TXE);
-
-    if (m_txFifo.isEmpty()) // if there's no more data to transmit then turn off TX interrupts
-      USART_ITConfig(m_usart, USART_IT_TXE, DISABLE);
-  }
-}
-
-  // Flushes the transmit shift register
-// warning: this call is blocking
-void CSTMUART::flush()
-{
-  if(m_usart == NULL)
-    return;
-
-   // wait until the TXE shows the shift register is empty
-   while (USART_GetITStatus(m_usart, USART_FLAG_TXE))
-      ;
-}
-
-uint16_t CSTMUART::available()
-{
-  return m_rxFifo.isEmpty() ? 0U : 1U;
-}
-
-uint16_t CSTMUART::availableForWrite()
-{
-  return m_txFifo.isFull() ? 0U : 1U;
-}
-
-#endif

STMUART.h

@@ -1,91 +0,0 @@
-/*
- *   Copyright (c) 2020 by Jonathan Naylor G4KLX
- *   Copyright (c) 2020 by Geoffrey Merck F4FXL - KC3FRA   
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#if defined(STM32F4XX) || defined(STM32F7XX)
-#if !defined(STMUART_H)
-#define STMUART_H
-
-#if defined(STM32F4XX)
-#include "stm32f4xx.h"
-#elif defined(STM32F7XX)
-#include "stm32f7xx.h"
-#endif
-
-const uint16_t BUFFER_SIZE = 2048U; //needs to be a power of 2 !
-const uint16_t BUFFER_MASK = BUFFER_SIZE - 1;
-
-class CSTMUARTFIFO {
-public:
-  CSTMUARTFIFO() :
-  m_head(0U),
-  m_tail(0U)
-  {
-  }
-
-  void put(uint8_t data)
-  {
-    m_buffer[BUFFER_MASK & (m_head++)] = data;
-  }
-
-  uint8_t get()
-  {
-    return m_buffer[BUFFER_MASK & (m_tail++)];
-  }
-
-  void reset()
-  {
-    m_tail = 0U;
-    m_head = 0U;
-  }
-
-  bool isEmpty()
-  {
-    return m_tail == m_head;
-  }
-
-  bool isFull()
-  {
-    return ((m_head + 1U) & BUFFER_MASK) == (m_tail & BUFFER_MASK);
-  }
-
-private:
-  volatile uint8_t  m_buffer[BUFFER_SIZE];
-  volatile uint16_t m_head;
-  volatile uint16_t m_tail;
-};
-
-class CSTMUART {
-public:
-  CSTMUART();
-  void init(USART_TypeDef* usart);
-  void write(const uint8_t * data, uint16_t length);
-  uint8_t read();
-  void handleIRQ();
-  void flush();
-  uint16_t available();
-  uint16_t availableForWrite();
-
-private:
-  USART_TypeDef * m_usart;
-  CSTMUARTFIFO    m_rxFifo;
-  CSTMUARTFIFO    m_txFifo;
-};
-
-#endif
-#endif

SampleRB.cpp

@@ -0,0 +1,106 @@
+/*
+TX fifo control - Copyright (C) KI6ZUM 2015
+Copyright (C) 2015,2016 by Jonathan Naylor G4KLX
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Library General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+Library General Public License for more details.
+
+You should have received a copy of the GNU Library General Public
+License along with this library; if not, write to the
+Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
+Boston, MA  02110-1301, USA.
+*/
+
+#include "SampleRB.h"
+
+CSampleRB::CSampleRB(uint16_t length) :
+m_length(length),
+m_head(0U),
+m_tail(0U),
+m_full(false),
+m_overflow(false)
+{
+  m_samples = new uint16_t[length];
+  m_control = new uint8_t[length];
+}
+
+uint16_t CSampleRB::getSpace() const
+{
+  uint16_t n = 0U;
+
+  if (m_tail == m_head)
+    n = m_full ? 0U : m_length;
+  else if (m_tail < m_head)
+    n = m_length - m_head + m_tail;
+  else
+    n = m_tail - m_head;
+
+  if (n > m_length)
+    n = 0U;
+
+  return n;
+}
+
+uint16_t CSampleRB::getData() const
+{
+  if (m_tail == m_head)
+    return m_full ? m_length : 0U;
+  else if (m_tail < m_head)
+    return m_head - m_tail;
+  else
+    return m_length - m_tail + m_head;
+}
+
+bool CSampleRB::put(uint16_t sample, uint8_t control)
+{
+  if (m_full) {
+    m_overflow = true;
+    return false;
+  }
+
+  m_samples[m_head] = sample;
+  m_control[m_head] = control;
+
+  m_head++;
+  if (m_head >= m_length)
+    m_head = 0U;
+
+  if (m_head == m_tail)
+    m_full = true;
+
+  return true;
+}
+
+bool CSampleRB::get(uint16_t& sample, uint8_t& control)
+{
+  if (m_head == m_tail && !m_full)
+    return false;
+
+  sample  = m_samples[m_tail];
+  control = m_control[m_tail];
+
+  m_full = false;
+
+  m_tail++;
+  if (m_tail >= m_length)
+    m_tail = 0U;
+
+  return true;
+}
+
+bool CSampleRB::hasOverflowed()
+{
+  bool overflow = m_overflow;
+
+  m_overflow = false;
+
+  return overflow;
+}
+

SampleRB.h

@@ -0,0 +1,60 @@
+/*
+Serial fifo control - Copyright (C) KI6ZUM 2015
+Copyright (C) 2015,2016 by Jonathan Naylor G4KLX
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Library General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+Library General Public License for more details.
+
+You should have received a copy of the GNU Library General Public
+License along with this library; if not, write to the
+Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
+Boston, MA  02110-1301, USA.
+*/
+
+#if !defined(SAMPLERB_H)
+#define  SAMPLERB_H
+
+#if defined(STM32F4XX)
+#include "stm32f4xx.h"
+#elif defined(STM32F7XX)
+#include "stm32f7xx.h"
+#elif defined(STM32F105xC)
+#include "stm32f1xx.h"
+#include <cstddef>
+#else
+#include <Arduino.h>
+#endif
+
+class CSampleRB {
+public:
+  CSampleRB(uint16_t length);
+  
+  uint16_t getSpace() const;
+  
+  uint16_t getData() const;
+
+  bool put(uint16_t sample, uint8_t control);
+
+  bool get(uint16_t& sample, uint8_t& control);
+
+  bool hasOverflowed();
+
+private:
+  uint16_t           m_length;
+  volatile uint16_t* m_samples;
+  volatile uint8_t*  m_control;
+  volatile uint16_t  m_head;
+  volatile uint16_t  m_tail;
+  volatile bool      m_full;
+  bool               m_overflow;
+};
+
+#endif
+

SerialPort.cpp

@@ -68,10 +68,6 @@ const uint8_t MMDVM_POCSAG_DATA  = 0x50U;
 const uint8_t MMDVM_FM_PARAMS1   = 0x60U;
 const uint8_t MMDVM_FM_PARAMS2   = 0x61U;
 const uint8_t MMDVM_FM_PARAMS3   = 0x62U;
-const uint8_t MMDVM_FM_PARAMS4   = 0x63U;
-const uint8_t MMDVM_FM_DATA      = 0x65U;
-const uint8_t MMDVM_FM_STATUS    = 0x66U;
-const uint8_t MMDVM_FM_EOT       = 0x67U;
 
 const uint8_t MMDVM_ACK          = 0x70U;
 const uint8_t MMDVM_NAK          = 0x7FU;
@@ -107,7 +103,7 @@ const uint8_t MMDVM_DEBUG5       = 0xF5U;
 #define	HW_TYPE	"MMDVM"
 #endif
 
-#define DESCRIPTION "20200620 (D-Star/DMR/System Fusion/P25/NXDN/POCSAG/FM)"
+#define DESCRIPTION "20200520 (D-Star/DMR/System Fusion/P25/NXDN/POCSAG/FM)"
 
 #if defined(GITVERSION)
 #define concat(h, a, b, c) h " " a " " b " GitID #" c ""
@@ -162,7 +158,7 @@ void CSerialPort::getStatus()
 
   // Send all sorts of interesting internal values
   reply[0U]  = MMDVM_FRAME_START;
-  reply[1U]  = 14U;
+  reply[1U]  = 13U;
   reply[2U]  = MMDVM_GET_STATUS;
 
   reply[3U]  = 0x00U;
@@ -244,12 +240,7 @@ void CSerialPort::getStatus()
   else
     reply[12U] = 0U;
 
-  if (m_fmEnable)
-    reply[13U] = fm.getSpace();
-  else
-    reply[13U] = 0U;
-
-  writeInt(1U, reply, 14);
+  writeInt(1U, reply, 13);
 }
 
 void CSerialPort::getVersion()
@@ -442,32 +433,12 @@ uint8_t CSerialPort::setFMParams3(const uint8_t* data, uint8_t length)
 
   bool     useCOS         = (data[8U] & 0x01U) == 0x01U;
   bool     cosInvert      = (data[8U] & 0x02U) == 0x02U;
-  bool     kerchunkTX     = (data[8U] & 0x04U) == 0x04U;
 
   uint8_t  rfAudioBoost   = data[9U];
   uint8_t  maxDev         = data[10U];
   uint8_t  rxLevel        = data[11U];
 
-  return fm.setMisc(timeout, timeoutLevel, ctcssFrequency, ctcssHighThreshold, ctcssLowThreshold, ctcssLevel, kerchunkTime, kerchunkTX, hangTime, useCOS, cosInvert, rfAudioBoost, maxDev, rxLevel);
-}
-
-uint8_t CSerialPort::setFMParams4(const uint8_t* data, uint8_t length)
-{
-  if (length < 4U)
-    return 4U;
-
-  uint8_t  audioBoost = data[0U];
-  uint8_t  speed      = data[1U];
-  uint16_t frequency  = data[2U] * 10U;
-  uint8_t  level      = data[3U];
-
-  char ack[50U];
-  uint8_t n = 0U;
-  for (uint8_t i = 4U; i < length; i++, n++)
-    ack[n] = data[i];
-  ack[n] = '\0';
-
-  return fm.setExt(ack, audioBoost, speed, frequency, level);
+  return fm.setMisc(timeout, timeoutLevel, ctcssFrequency, ctcssHighThreshold, ctcssLowThreshold, ctcssLevel, kerchunkTime, hangTime, useCOS, cosInvert, rfAudioBoost, maxDev, rxLevel);
 }
 
 uint8_t CSerialPort::setMode(const uint8_t* data, uint8_t length)
@@ -603,7 +574,7 @@ void CSerialPort::setMode(MMDVM_STATE modemState)
 
 void CSerialPort::start()
 {
-  beginInt(1U, SERIAL_SPEED);
+  beginInt(1U, 115200);
 
 #if defined(SERIAL_REPEATER)
   beginInt(3U, 9600);
@@ -621,8 +592,7 @@ void CSerialPort::process()
         m_buffer[0U] = c;
         m_ptr = 1U;
         m_len = 0U;
-      }
-      else {
+      } else {
         m_ptr = 0U;
         m_len = 0U;
       }
@@ -698,16 +668,6 @@ void CSerialPort::process()
             }
             break;
 
-          case MMDVM_FM_PARAMS4:
-            err = setFMParams4(m_buffer + 3U, m_len - 3U);
-            if (err == 0U) {
-              sendACK();
-            } else {
-              DEBUG2("Received invalid FM params 4", err);
-              sendNAK(err);
-            }
-            break;
-
           case MMDVM_CAL_DATA:
             if (m_modemState == STATE_DSTARCAL)
               err = calDStarTX.write(m_buffer + 3U, m_len - 3U);
@@ -924,20 +884,6 @@ void CSerialPort::process()
             }
             break;
 
-          case MMDVM_FM_DATA:
-            if (m_fmEnable) {
-              if (m_modemState == STATE_IDLE || m_modemState == STATE_FM)
-                err = fm.writeData(m_buffer + 3U, m_len - 3U);
-            }
-            if (err == 0U) {
-              if (m_modemState == STATE_IDLE)
-                setMode(STATE_FM);
-            } else {
-              DEBUG2("Received invalid FM data", err);
-              sendNAK(err);
-            }
-            break;
-
           case MMDVM_TRANSPARENT:
           case MMDVM_QSO_INFO:
             // Do nothing on the MMDVM.
@@ -1250,64 +1196,6 @@ void CSerialPort::writeNXDNLost()
   writeInt(1U, reply, 3);
 }
 
-void CSerialPort::writeFMData(const uint8_t* data, uint8_t length)
-{
-  if (m_modemState != STATE_FM && m_modemState != STATE_IDLE)
-    return;
-
-  if (!m_fmEnable)
-    return;
-
-  uint8_t reply[255U];
-
-  reply[0U] = MMDVM_FRAME_START;
-  reply[1U] = 0U;
-  reply[2U] = MMDVM_FM_DATA;
-
-  uint8_t count = 3U;
-  for (uint8_t i = 0U; i < length; i++, count++)
-    reply[count] = data[i];
-
-  reply[1U] = count;
-
-  writeInt(1U, reply, count);
-}
-
-void CSerialPort::writeFMStatus(uint8_t status)
-{
-  if (m_modemState != STATE_FM && m_modemState != STATE_IDLE)
-    return;
-
-  if (!m_fmEnable)
-    return;
-
-  uint8_t reply[10U];
-
-  reply[0U] = MMDVM_FRAME_START;
-  reply[1U] = 4U;
-  reply[2U] = MMDVM_FM_STATUS;
-  reply[3U] = status;
-
-  writeInt(1U, reply, 4U);
-}
-
-void CSerialPort::writeFMEOT()
-{
-  if (m_modemState != STATE_FM && m_modemState != STATE_IDLE)
-    return;
-
-  if (!m_fmEnable)
-    return;
-
-  uint8_t reply[10U];
-
-  reply[0U] = MMDVM_FRAME_START;
-  reply[1U] = 3U;
-  reply[2U] = MMDVM_FM_EOT;
-
-  writeInt(1U, reply, 3U);
-}
-
 void CSerialPort::writeCalData(const uint8_t* data, uint8_t length)
 {
   if (m_modemState != STATE_DSTARCAL)

SerialPort.h

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2015,2016,2017,2018,2020 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2015,2016,2017,2018 by Jonathan Naylor G4KLX
  *
  *   This program is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by
@@ -21,11 +21,7 @@
 
 #include "Config.h"
 #include "Globals.h"
-#include "RingBuffer.h"
-
-#if !defined(SERIAL_SPEED)
-#define SERIAL_SPEED 115200
-#endif
+#include "SerialRB.h"
 
 
 class CSerialPort {
@@ -54,10 +50,6 @@ public:
   void writeNXDNData(const uint8_t* data, uint8_t length);
   void writeNXDNLost();
 
-  void writeFMData(const uint8_t* data, uint8_t length);
-  void writeFMStatus(uint8_t status);
-  void writeFMEOT();
-
   void writeCalData(const uint8_t* data, uint8_t length);
   void writeRSSIData(const uint8_t* data, uint8_t length);
 
@@ -72,7 +64,7 @@ private:
   uint8_t   m_ptr;
   uint8_t   m_len;
   bool      m_debug;
-  CRingBuffer<uint8_t> m_repeat;
+  CSerialRB m_repeat;
 
   void    sendACK();
   void    sendNAK(uint8_t err);
@@ -84,7 +76,6 @@ private:
   uint8_t setFMParams1(const uint8_t* data, uint8_t length);
   uint8_t setFMParams2(const uint8_t* data, uint8_t length);
   uint8_t setFMParams3(const uint8_t* data, uint8_t length);
-  uint8_t setFMParams4(const uint8_t* data, uint8_t length);
 
   // Hardware versions
   void    beginInt(uint8_t n, int speed);

SerialRB.cpp

@@ -0,0 +1,100 @@
+/*
+Serial RB control - Copyright (C) KI6ZUM 2015
+Copyright (C) 2015,2016 by Jonathan Naylor G4KLX
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Library General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+Library General Public License for more details.
+
+You should have received a copy of the GNU Library General Public
+License along with this library; if not, write to the
+Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
+Boston, MA  02110-1301, USA.
+*/
+
+#include "SerialRB.h"
+
+CSerialRB::CSerialRB(uint16_t length) :
+m_length(length),
+m_head(0U),
+m_tail(0U),
+m_full(false)
+{
+  m_buffer = new uint8_t[length];
+}
+
+void CSerialRB::reset()
+{
+  m_head = 0U;
+  m_tail = 0U;
+  m_full = false;
+}
+
+uint16_t CSerialRB::getSpace() const
+{
+  uint16_t n = 0U;
+
+  if (m_tail == m_head)
+    n = m_full ? 0U : m_length;
+  else if (m_tail < m_head)
+    n = m_length - m_head + m_tail;
+  else
+    n = m_tail - m_head;
+
+  if (n > m_length)
+    n = 0U;
+
+  return n;
+}
+
+uint16_t CSerialRB::getData() const
+{
+  if (m_tail == m_head)
+    return m_full ? m_length : 0U;
+  else if (m_tail < m_head)
+    return m_head - m_tail;
+  else
+    return m_length - m_tail + m_head;
+}
+
+bool CSerialRB::put(uint8_t c)
+{
+  if (m_full)
+    return false;
+
+  m_buffer[m_head] = c;
+
+  m_head++;
+  if (m_head >= m_length)
+    m_head = 0U;
+
+  if (m_head == m_tail)
+    m_full = true;
+
+  return true;
+}
+
+uint8_t CSerialRB::peek() const
+{
+  return m_buffer[m_tail];
+}
+
+uint8_t CSerialRB::get()
+{
+  uint8_t value = m_buffer[m_tail];
+
+  m_full = false;
+
+  m_tail++;
+  if (m_tail >= m_length)
+    m_tail = 0U;
+
+  return value;
+}
+

SerialRB.h

@@ -0,0 +1,62 @@
+/*
+Serial fifo control - Copyright (C) KI6ZUM 2015
+Copyright (C) 2015,2016 by Jonathan Naylor G4KLX
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Library General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+Library General Public License for more details.
+
+You should have received a copy of the GNU Library General Public
+License along with this library; if not, write to the
+Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
+Boston, MA  02110-1301, USA.
+*/
+
+#if !defined(SERIALRB_H)
+#define  SERIALRB_H
+
+#if defined(STM32F4XX)
+#include "stm32f4xx.h"
+#elif defined(STM32F7XX)
+#include "stm32f7xx.h"
+#elif defined(STM32F105xC)
+#include "stm32f1xx.h"
+#include <cstddef>
+#else
+#include <Arduino.h>
+#endif
+
+const uint16_t SERIAL_RINGBUFFER_SIZE = 370U;
+
+class CSerialRB {
+public:
+  CSerialRB(uint16_t length = SERIAL_RINGBUFFER_SIZE);
+
+  uint16_t getSpace() const;
+
+  uint16_t getData() const;
+
+  void reset();
+
+  bool put(uint8_t c);
+
+  uint8_t peek() const;
+
+  uint8_t get();
+
+private:
+  uint16_t          m_length;
+  volatile uint8_t* m_buffer;
+  volatile uint16_t m_head;
+  volatile uint16_t m_tail;
+  volatile bool     m_full;
+};
+
+#endif
+

SerialSTM.cpp

@@ -39,7 +39,9 @@ UART5  - TXD PC12 - RXD PD2 (Discovery, MMDVM-Pi, MMDVM-Pi F722 board, MMDVM-F4M
 
 #if defined(STM32F4XX) || defined(STM32F7XX)
 
-#include "STMUART.h"
+#define TX_SERIAL_FIFO_SIZE 512U
+#define RX_SERIAL_FIFO_SIZE 512U
+
 extern "C" {
    void USART1_IRQHandler();
    void USART2_IRQHandler();
@@ -50,12 +52,111 @@ extern "C" {
 /* ************* USART1 ***************** */
 #if defined(STM32F4_PI) || defined(STM32F4_F4M) || defined(STM32F722_F7M) || defined(STM32F722_PI) || defined(STM32F722_RPT_HAT) || defined(STM32F4_DVM) || (defined(STM32F4_NUCLEO) && defined(STM32F4_NUCLEO_ARDUINO_HEADER)) || defined(DRCC_DVM)
 
+volatile uint8_t  TXSerialfifo1[TX_SERIAL_FIFO_SIZE];
+volatile uint8_t  RXSerialfifo1[RX_SERIAL_FIFO_SIZE];
+volatile uint16_t TXSerialfifohead1, TXSerialfifotail1;
+volatile uint16_t RXSerialfifohead1, RXSerialfifotail1;
 
-static CSTMUART m_USART1;
+// Init queues
+void TXSerialfifoinit1()
+{
+   TXSerialfifohead1 = 0U;
+   TXSerialfifotail1 = 0U;
+}
+
+void RXSerialfifoinit1()
+{
+   RXSerialfifohead1 = 0U;
+   RXSerialfifotail1 = 0U;
+}
+
+// How full is queue
+// TODO decide if how full or how empty is preferred info to return
+uint16_t TXSerialfifolevel1()
+{
+   uint32_t tail = TXSerialfifotail1;
+   uint32_t head = TXSerialfifohead1;
+
+   if (tail > head)
+      return TX_SERIAL_FIFO_SIZE + head - tail;
+   else
+      return head - tail;
+}
+
+uint16_t RXSerialfifolevel1()
+{
+   uint32_t tail = RXSerialfifotail1;
+   uint32_t head = RXSerialfifohead1;
+
+   if (tail > head)
+      return RX_SERIAL_FIFO_SIZE + head - tail;
+   else
+      return head - tail;
+}
+
+// Flushes the transmit shift register
+// warning: this call is blocking
+void TXSerialFlush1()
+{
+   // wait until the TXE shows the shift register is empty
+   while (USART_GetITStatus(USART1, USART_FLAG_TXE))
+      ;
+}
+
+uint8_t TXSerialfifoput1(uint8_t next)
+{
+   if (TXSerialfifolevel1() < TX_SERIAL_FIFO_SIZE) {
+      TXSerialfifo1[TXSerialfifohead1] = next;
+
+      TXSerialfifohead1++;
+      if (TXSerialfifohead1 >= TX_SERIAL_FIFO_SIZE)
+         TXSerialfifohead1 = 0U;
+
+      // make sure transmit interrupts are enabled as long as there is data to send
+      USART_ITConfig(USART1, USART_IT_TXE, ENABLE);
+      return 1U;
+   } else {
+      return 0U; // signal an overflow occurred by returning a zero count
+   }
+}
 
 void USART1_IRQHandler()
 {
-  m_USART1.handleIRQ();
+   uint8_t c;
+
+   if (USART_GetITStatus(USART1, USART_IT_RXNE)) {
+      c = (uint8_t) USART_ReceiveData(USART1);
+
+      if (RXSerialfifolevel1() < RX_SERIAL_FIFO_SIZE) {
+         RXSerialfifo1[RXSerialfifohead1] = c;
+
+         RXSerialfifohead1++;
+         if (RXSerialfifohead1 >= RX_SERIAL_FIFO_SIZE)
+            RXSerialfifohead1 = 0U;
+      } else {
+         // TODO - do something if rx fifo is full?
+      }
+
+      USART_ClearITPendingBit(USART1, USART_IT_RXNE);
+   }
+
+   if (USART_GetITStatus(USART1, USART_IT_TXE)) {
+      c = 0U;
+
+      if (TXSerialfifohead1 != TXSerialfifotail1) { // if the fifo is not empty
+         c = TXSerialfifo1[TXSerialfifotail1];
+
+         TXSerialfifotail1++;
+         if (TXSerialfifotail1 >= TX_SERIAL_FIFO_SIZE)
+            TXSerialfifotail1 = 0U;
+
+         USART_SendData(USART1, c);
+      } else { // if there's no more data to transmit then turn off TX interrupts
+         USART_ITConfig(USART1, USART_IT_TXE, DISABLE);
+      }
+
+      USART_ClearITPendingBit(USART1, USART_IT_TXE);
+   }
 }
 
 void InitUSART1(int speed)
@@ -100,7 +201,41 @@ void InitUSART1(int speed)
 
    USART_ITConfig(USART1, USART_IT_RXNE, ENABLE);
 
-   m_USART1.init(USART1);
+   // initialize the fifos
+   TXSerialfifoinit1();
+   RXSerialfifoinit1();
+}
+
+uint8_t AvailUSART1()
+{
+   if (RXSerialfifolevel1() > 0U)
+      return 1U;
+   else
+      return 0U;
+}
+
+int AvailForWriteUSART1()
+{
+   return TX_SERIAL_FIFO_SIZE - TXSerialfifolevel1();
+}
+
+uint8_t ReadUSART1()
+{
+   uint8_t data_c = RXSerialfifo1[RXSerialfifotail1];
+
+   RXSerialfifotail1++;
+   if (RXSerialfifotail1 >= RX_SERIAL_FIFO_SIZE)
+      RXSerialfifotail1 = 0U;
+
+   return data_c;
+}
+
+void WriteUSART1(const uint8_t* data, uint16_t length)
+{
+   for (uint16_t i = 0U; i < length; i++)
+      TXSerialfifoput1(data[i]);
+
+   USART_ITConfig(USART1, USART_IT_TXE, ENABLE);
 }
 
 #endif
@@ -108,12 +243,111 @@ void InitUSART1(int speed)
 /* ************* USART2 ***************** */
 #if defined(STM32F4_NUCLEO) || defined(STM32F4_RPT_HAT_TGO) || defined(DRCC_DVM)
 
-static CSTMUART m_USART2;
+volatile uint8_t  TXSerialfifo2[TX_SERIAL_FIFO_SIZE];
+volatile uint8_t  RXSerialfifo2[RX_SERIAL_FIFO_SIZE];
+volatile uint16_t TXSerialfifohead2, TXSerialfifotail2;
+volatile uint16_t RXSerialfifohead2, RXSerialfifotail2;
 
+// Init queues
+void TXSerialfifoinit2()
+{
+   TXSerialfifohead2 = 0U;
+   TXSerialfifotail2 = 0U;
+}
+
+void RXSerialfifoinit2()
+{
+   RXSerialfifohead2 = 0U;
+   RXSerialfifotail2 = 0U;
+}
+
+// How full is queue
+// TODO decide if how full or how empty is preferred info to return
+uint16_t TXSerialfifolevel2()
+{
+   uint32_t tail = TXSerialfifotail2;
+   uint32_t head = TXSerialfifohead2;
+
+   if (tail > head)
+      return TX_SERIAL_FIFO_SIZE + head - tail;
+   else
+      return head - tail;
+}
+
+uint16_t RXSerialfifolevel2()
+{
+   uint32_t tail = RXSerialfifotail2;
+   uint32_t head = RXSerialfifohead2;
+
+   if (tail > head)
+      return RX_SERIAL_FIFO_SIZE + head - tail;
+   else
+      return head - tail;
+}
+
+// Flushes the transmit shift register
+// warning: this call is blocking
+void TXSerialFlush2()
+{
+   // wait until the TXE shows the shift register is empty
+   while (USART_GetITStatus(USART2, USART_FLAG_TXE))
+      ;
+}
+
+uint8_t TXSerialfifoput2(uint8_t next)
+{
+   if (TXSerialfifolevel2() < TX_SERIAL_FIFO_SIZE) {
+      TXSerialfifo2[TXSerialfifohead2] = next;
+
+      TXSerialfifohead2++;
+      if (TXSerialfifohead2 >= TX_SERIAL_FIFO_SIZE)
+         TXSerialfifohead2 = 0U;
+
+      // make sure transmit interrupts are enabled as long as there is data to send
+      USART_ITConfig(USART2, USART_IT_TXE, ENABLE);
+      return 1U;
+   } else {
+      return 0U; // signal an overflow occurred by returning a zero count
+   }
+}
 
 void USART2_IRQHandler()
 {
-   m_USART2.handleIRQ();
+   uint8_t c;
+
+   if (USART_GetITStatus(USART2, USART_IT_RXNE)) {
+      c = (uint8_t) USART_ReceiveData(USART2);
+
+      if (RXSerialfifolevel2() < RX_SERIAL_FIFO_SIZE) {
+         RXSerialfifo2[RXSerialfifohead2] = c;
+
+         RXSerialfifohead2++;
+         if (RXSerialfifohead2 >= RX_SERIAL_FIFO_SIZE)
+            RXSerialfifohead2 = 0U;
+      } else {
+         // TODO - do something if rx fifo is full?
+      }
+
+      USART_ClearITPendingBit(USART2, USART_IT_RXNE);
+   }
+
+   if (USART_GetITStatus(USART2, USART_IT_TXE)) {
+      c = 0U;
+
+      if (TXSerialfifohead2 != TXSerialfifotail2) { // if the fifo is not empty
+         c = TXSerialfifo2[TXSerialfifotail2];
+
+         TXSerialfifotail2++;
+         if (TXSerialfifotail2 >= TX_SERIAL_FIFO_SIZE)
+            TXSerialfifotail2 = 0U;
+
+         USART_SendData(USART2, c);
+      } else { // if there's no more data to transmit then turn off TX interrupts
+         USART_ITConfig(USART2, USART_IT_TXE, DISABLE);
+      }
+
+      USART_ClearITPendingBit(USART2, USART_IT_TXE);
+   }
 }
 
 void InitUSART2(int speed)
@@ -158,7 +392,41 @@ void InitUSART2(int speed)
 
    USART_ITConfig(USART2, USART_IT_RXNE, ENABLE);
 
-   m_USART2.init(USART2);
+   // initialize the fifos
+   TXSerialfifoinit2();
+   RXSerialfifoinit2();
+}
+
+uint8_t AvailUSART2()
+{
+   if (RXSerialfifolevel2() > 0U)
+      return 1U;
+   else
+      return 0U;
+}
+
+int AvailForWriteUSART2()
+{
+   return TX_SERIAL_FIFO_SIZE - TXSerialfifolevel2();
+}
+
+uint8_t ReadUSART2()
+{
+   uint8_t data_c = RXSerialfifo2[RXSerialfifotail2];
+
+   RXSerialfifotail2++;
+   if (RXSerialfifotail2 >= RX_SERIAL_FIFO_SIZE)
+      RXSerialfifotail2 = 0U;
+
+   return data_c;
+}
+
+void WriteUSART2(const uint8_t* data, uint16_t length)
+{
+   for (uint16_t i = 0U; i < length; i++)
+      TXSerialfifoput2(data[i]);
+
+   USART_ITConfig(USART2, USART_IT_TXE, ENABLE);
 }
 
 #endif
@@ -166,11 +434,111 @@ void InitUSART2(int speed)
 /* ************* USART3 ***************** */
 #if defined(STM32F4_DISCOVERY) || defined(STM32F7_NUCLEO)
 
-static CSTMUART m_USART3;
+volatile uint8_t  TXSerialfifo3[TX_SERIAL_FIFO_SIZE];
+volatile uint8_t  RXSerialfifo3[RX_SERIAL_FIFO_SIZE];
+volatile uint16_t TXSerialfifohead3, TXSerialfifotail3;
+volatile uint16_t RXSerialfifohead3, RXSerialfifotail3;
+
+// Init queues
+void TXSerialfifoinit3()
+{
+   TXSerialfifohead3 = 0U;
+   TXSerialfifotail3 = 0U;
+}
+
+void RXSerialfifoinit3()
+{
+   RXSerialfifohead3 = 0U;
+   RXSerialfifotail3 = 0U;
+}
+
+// How full is queue
+// TODO decide if how full or how empty is preferred info to return
+uint16_t TXSerialfifolevel3()
+{
+   uint32_t tail = TXSerialfifotail3;
+   uint32_t head = TXSerialfifohead3;
+
+   if (tail > head)
+      return TX_SERIAL_FIFO_SIZE + head - tail;
+   else
+      return head - tail;
+}
+
+uint16_t RXSerialfifolevel3()
+{
+   uint32_t tail = RXSerialfifotail3;
+   uint32_t head = RXSerialfifohead3;
+
+   if (tail > head)
+      return RX_SERIAL_FIFO_SIZE + head - tail;
+   else
+      return head - tail;
+}
+
+// Flushes the transmit shift register
+// warning: this call is blocking
+void TXSerialFlush3()
+{
+   // wait until the TXE shows the shift register is empty
+   while (USART_GetITStatus(USART3, USART_FLAG_TXE))
+      ;
+}
+
+uint8_t TXSerialfifoput3(uint8_t next)
+{
+   if (TXSerialfifolevel3() < TX_SERIAL_FIFO_SIZE) {
+      TXSerialfifo3[TXSerialfifohead3] = next;
+
+      TXSerialfifohead3++;
+      if (TXSerialfifohead3 >= TX_SERIAL_FIFO_SIZE)
+         TXSerialfifohead3 = 0U;
+
+      // make sure transmit interrupts are enabled as long as there is data to send
+      USART_ITConfig(USART3, USART_IT_TXE, ENABLE);
+      return 1U;
+   } else {
+      return 0U; // signal an overflow occurred by returning a zero count
+   }
+}
 
 void USART3_IRQHandler()
 {
-   m_USART3.handleIRQ();
+   uint8_t c;
+
+   if (USART_GetITStatus(USART3, USART_IT_RXNE)) {
+      c = (uint8_t) USART_ReceiveData(USART3);
+
+      if (RXSerialfifolevel3() < RX_SERIAL_FIFO_SIZE) {
+         RXSerialfifo3[RXSerialfifohead3] = c;
+
+         RXSerialfifohead3++;
+         if (RXSerialfifohead3 >= RX_SERIAL_FIFO_SIZE)
+            RXSerialfifohead3 = 0U;
+      } else {
+         // TODO - do something if rx fifo is full?
+      }
+
+      USART_ClearITPendingBit(USART3, USART_IT_RXNE);
+   }
+
+   if (USART_GetITStatus(USART3, USART_IT_TXE)) {
+      c = 0U;
+
+      if (TXSerialfifohead3 != TXSerialfifotail3) { // if the fifo is not empty
+         c = TXSerialfifo3[TXSerialfifotail3];
+
+         TXSerialfifotail3++;
+         if (TXSerialfifotail3 >= TX_SERIAL_FIFO_SIZE)
+            TXSerialfifotail3 = 0U;
+
+         USART_SendData(USART3, c);
+      } else { // if there's no more data to transmit then turn off TX interrupts
+         USART_ITConfig(USART3, USART_IT_TXE, DISABLE);
+      }
+
+      USART_ClearITPendingBit(USART3, USART_IT_TXE);
+   }
 }
 
 #if defined(STM32F7_NUCLEO)
@@ -232,7 +600,41 @@ void InitUSART3(int speed)
 
    USART_ITConfig(USART3, USART_IT_RXNE, ENABLE);
 
-   m_USART3.init(USART3);
+   // initialize the fifos
+   TXSerialfifoinit3();
+   RXSerialfifoinit3();
+}
+
+uint8_t AvailUSART3()
+{
+   if (RXSerialfifolevel3() > 0U)
+      return 1U;
+   else
+      return 0U;
+}
+
+int AvailForWriteUSART3()
+{
+   return TX_SERIAL_FIFO_SIZE - TXSerialfifolevel3();
+}
+
+uint8_t ReadUSART3()
+{
+   uint8_t data_c = RXSerialfifo3[RXSerialfifotail3];
+
+   RXSerialfifotail3++;
+   if (RXSerialfifotail3 >= RX_SERIAL_FIFO_SIZE)
+      RXSerialfifotail3 = 0U;
+
+   return data_c;
+}
+
+void WriteUSART3(const uint8_t* data, uint16_t length)
+{
+   for (uint16_t i = 0U; i < length; i++)
+      TXSerialfifoput3(data[i]);
+
+   USART_ITConfig(USART3, USART_IT_TXE, ENABLE);
 }
 
 #endif
@@ -240,11 +642,111 @@ void InitUSART3(int speed)
 /* ************* UART5 ***************** */
 #if !(defined(STM32F4_NUCLEO) && defined(STM32F4_NUCLEO_ARDUINO_HEADER))
 
-static CSTMUART m_UART5;
+volatile uint8_t  TXSerialfifo5[TX_SERIAL_FIFO_SIZE];
+volatile uint8_t  RXSerialfifo5[RX_SERIAL_FIFO_SIZE];
+volatile uint16_t TXSerialfifohead5, TXSerialfifotail5;
+volatile uint16_t RXSerialfifohead5, RXSerialfifotail5;
+
+// Init queues
+void TXSerialfifoinit5()
+{
+   TXSerialfifohead5 = 0U;
+   TXSerialfifotail5 = 0U;
+}
+
+void RXSerialfifoinit5()
+{
+   RXSerialfifohead5 = 0U;
+   RXSerialfifotail5 = 0U;
+}
+
+// How full is queue
+// TODO decide if how full or how empty is preferred info to return
+uint16_t TXSerialfifolevel5()
+{
+   uint32_t tail = TXSerialfifotail5;
+   uint32_t head = TXSerialfifohead5;
+
+   if (tail > head)
+      return TX_SERIAL_FIFO_SIZE + head - tail;
+   else
+      return head - tail;
+}
+
+uint16_t RXSerialfifolevel5()
+{
+   uint32_t tail = RXSerialfifotail5;
+   uint32_t head = RXSerialfifohead5;
+
+   if (tail > head)
+      return RX_SERIAL_FIFO_SIZE + head - tail;
+   else
+      return head - tail;
+}
+
+// Flushes the transmit shift register
+// warning: this call is blocking
+void TXSerialFlush5()
+{
+   // wait until the TXE shows the shift register is empty
+   while (USART_GetITStatus(UART5, USART_FLAG_TXE))
+      ;
+}
+
+uint8_t TXSerialfifoput5(uint8_t next)
+{
+   if (TXSerialfifolevel5() < TX_SERIAL_FIFO_SIZE) {
+      TXSerialfifo5[TXSerialfifohead5] = next;
+
+      TXSerialfifohead5++;
+      if (TXSerialfifohead5 >= TX_SERIAL_FIFO_SIZE)
+         TXSerialfifohead5 = 0U;
+
+      // make sure transmit interrupts are enabled as long as there is data to send
+      USART_ITConfig(UART5, USART_IT_TXE, ENABLE);
+      return 1U;
+   } else {
+      return 0U; // signal an overflow occurred by returning a zero count
+   }
+}
 
 void UART5_IRQHandler()
 {
-   m_UART5.handleIRQ();
+   uint8_t c;
+
+   if (USART_GetITStatus(UART5, USART_IT_RXNE)) {
+      c = (uint8_t) USART_ReceiveData(UART5);
+
+      if (RXSerialfifolevel5() < RX_SERIAL_FIFO_SIZE) {
+         RXSerialfifo5[RXSerialfifohead5] = c;
+
+         RXSerialfifohead5++;
+         if (RXSerialfifohead5 >= RX_SERIAL_FIFO_SIZE)
+            RXSerialfifohead5 = 0U;
+      } else {
+         // TODO - do something if rx fifo is full?
+      }
+
+      USART_ClearITPendingBit(UART5, USART_IT_RXNE);
+   }
+
+   if (USART_GetITStatus(UART5, USART_IT_TXE)) {
+      c = 0U;
+
+      if (TXSerialfifohead5 != TXSerialfifotail5) { // if the fifo is not empty
+         c = TXSerialfifo5[TXSerialfifotail5];
+
+         TXSerialfifotail5++;
+         if (TXSerialfifotail5 >= TX_SERIAL_FIFO_SIZE)
+            TXSerialfifotail5 = 0U;
+
+         USART_SendData(UART5, c);
+      } else { // if there's no more data to transmit then turn off TX interrupts
+      USART_ITConfig(UART5, USART_IT_TXE, DISABLE);
+      }
+
+      USART_ClearITPendingBit(UART5, USART_IT_TXE);
+   }
 }
 
 void InitUART5(int speed)
@@ -293,7 +795,41 @@ void InitUART5(int speed)
 
    USART_ITConfig(UART5, USART_IT_RXNE, ENABLE);
 
-   m_UART5.init(UART5);
+   // initialize the fifos
+   TXSerialfifoinit5();
+   RXSerialfifoinit5();
+}
+
+uint8_t AvailUART5()
+{
+   if (RXSerialfifolevel5() > 0U)
+      return 1U;
+   else
+      return 0U;
+}
+
+int AvailForWriteUART5()
+{
+   return TX_SERIAL_FIFO_SIZE - TXSerialfifolevel5();
+}
+
+uint8_t ReadUART5()
+{
+   uint8_t data_c = RXSerialfifo5[RXSerialfifotail5];
+
+   RXSerialfifotail5++;
+   if (RXSerialfifotail5 >= RX_SERIAL_FIFO_SIZE)
+      RXSerialfifotail5 = 0U;
+
+   return data_c;
+}
+
+void WriteUART5(const uint8_t* data, uint16_t length)
+{
+   for (uint16_t i = 0U; i < length; i++)
+      TXSerialfifoput5(data[i]);
+
+   USART_ITConfig(UART5, USART_IT_TXE, ENABLE);
 }
 
 #endif
@@ -332,21 +868,21 @@ int CSerialPort::availableInt(uint8_t n)
    switch (n) {
       case 1U:
          #if defined(STM32F4_DISCOVERY) || defined(STM32F7_NUCLEO)
-         return m_USART3.availble();//AvailUSART3();
+         return AvailUSART3();
          #elif defined(STM32F4_PI) || defined(STM32F4_F4M) || defined(STM32F722_PI) || defined(STM32F722_F7M) || defined(STM32F722_RPT_HAT) || defined(STM32F4_DVM)
-         return m_USART1.available();//AvailUSART1();
+         return AvailUSART1();
          #elif defined(STM32F4_NUCLEO) || defined(STM32F4_RPT_HAT_TGO)
-         return m_USART2.available();//AvailUSART2();
+         return AvailUSART2();
          #elif defined(DRCC_DVM)
-         return m_USART1.available();//AvailUSART1();
+         return AvailUSART1();
          #endif
       case 3U:
          #if defined(STM32F4_NUCLEO) && defined(STM32F4_NUCLEO_ARDUINO_HEADER)
-         return m_USART1.available(); //AvailUSART1();
+         return AvailUSART1();
          #elif defined(DRCC_DVM)
-         return m_USART2.available(); //AvailUSART2();
+         return AvailUSART2();
          #else
-         return m_UART5.available();//AvailUART5();
+         return AvailUART5();
          #endif
       default:
          return 0;
@@ -358,21 +894,21 @@ int CSerialPort::availableForWriteInt(uint8_t n)
    switch (n) {
       case 1U:
          #if defined(STM32F4_DISCOVERY) || defined(STM32F7_NUCLEO)
-         return m_USART3.availableForWrite(); //AvailForWriteUSART3();
+         return AvailForWriteUSART3();
          #elif defined(STM32F4_PI) || defined(STM32F4_F4M) || defined(STM32F722_PI) || defined(STM32F722_F7M) || defined(STM32F722_RPT_HAT) || defined(STM32F4_DVM)
-         return m_USART1.availableForWrite(); //AvailForWriteUSART1();
+         return AvailForWriteUSART1();
          #elif defined(STM32F4_NUCLEO) || defined(STM32F4_RPT_HAT_TGO)
-         return m_USART2.availableForWrite();//AvailForWriteUSART2();
+         return AvailForWriteUSART2();
          #elif defined(DRCC_DVM)
-         return m_USART1.availableForWrite();//AvailForWriteUSART1();
+         return AvailForWriteUSART1();
          #endif
       case 3U:
          #if defined(STM32F4_NUCLEO) && defined(STM32F4_NUCLEO_ARDUINO_HEADER)
-         return m_USART1.availableForWrite(); //AvailForWriteUSART1();
+         return AvailForWriteUSART1();
          #elif defined(DRCC_DVM)
-         return m_USART2.availableForWrite();//AvailForWriteUSART2();
+         return AvailForWriteUSART2();
          #else
-         return m_UART5.availableForWrite();//AvailForWriteUART5();
+         return AvailForWriteUART5();
          #endif
       default:
          return 0;
@@ -384,21 +920,21 @@ uint8_t CSerialPort::readInt(uint8_t n)
    switch (n) {
       case 1U:
          #if defined(STM32F4_DISCOVERY) || defined(STM32F7_NUCLEO)
-         return m_USART3.read();//ReadUSART3();
+         return ReadUSART3();
          #elif defined(STM32F4_PI) || defined(STM32F4_F4M) || defined(STM32F722_PI) || defined(STM32F722_F7M) || defined(STM32F722_RPT_HAT) || defined(STM32F4_DVM)
-         return m_USART1.read();//ReadUSART1();
+         return ReadUSART1();
          #elif defined(STM32F4_NUCLEO) || defined(STM32F4_RPT_HAT_TGO)
-         return m_USART2.read();//ReadUSART2();
+         return ReadUSART2();
          #elif defined(DRCC_DVM)
-         return m_USART1.read();//ReadUSART1();
+         return ReadUSART1();
          #endif
       case 3U:
          #if defined(STM32F4_NUCLEO) && defined(STM32F4_NUCLEO_ARDUINO_HEADER)
-         return m_USART1.read();//ReadUSART1();
+         return ReadUSART1();
          #elif defined(DRCC_DVM)
-         return m_USART2.read();//ReadUSART2();
+         return ReadUSART2();
          #else
-         return m_UART5.read();//ReadUART5();
+         return ReadUART5();
          #endif
       default:
          return 0U;
@@ -410,36 +946,36 @@ void CSerialPort::writeInt(uint8_t n, const uint8_t* data, uint16_t length, bool
    switch (n) {
       case 1U:
          #if defined(STM32F4_DISCOVERY) || defined(STM32F7_NUCLEO)
-         m_USART3.write(data, length); //WriteUSART3(data, length);
+         WriteUSART3(data, length);
          if (flush)
-            m_USART3.flush();//TXSerialFlush3();
+            TXSerialFlush3();
          #elif defined(STM32F4_PI) || defined(STM32F4_F4M) || defined(STM32F722_PI) || defined(STM32F722_F7M) || defined(STM32F722_RPT_HAT) || defined(STM32F4_DVM)
-         m_USART1.write(data, length);//WriteUSART1(data, length);
+         WriteUSART1(data, length);
          if (flush)
-            m_USART1.flush();//TXSerialFlush1();
+            TXSerialFlush1();
          #elif defined(STM32F4_NUCLEO) || defined(STM32F4_RPT_HAT_TGO)
-         m_USART2.write(data, length);//WriteUSART2(data, length);
+         WriteUSART2(data, length);
          if (flush)
-            m_USART2.flush();//TXSerialFlush2();
+            TXSerialFlush2();
          #elif defined(DRCC_DVM)
-         m_USART1.write(data, length);//WriteUSART1(data, length);
+         WriteUSART1(data, length);
          if (flush)
-            m_USART1.flush();//TXSerialFlush1();
+            TXSerialFlush1();
          #endif
          break;
       case 3U:
          #if defined(STM32F4_NUCLEO) && defined(STM32F4_NUCLEO_ARDUINO_HEADER)
-         m_USART1.write(data, length); //WriteUSART1(data, length);
+         WriteUSART1(data, length);
          if (flush)
-            m_USART1.flush();
+            TXSerialFlush1();
          #elif defined(DRCC_DVM)
-         m_USART2.write(data, length);//WriteUSART2(data, length);
+         WriteUSART2(data, length);
          if (flush)
-            m_USART2.flush();//TXSerialFlush2();
+            TXSerialFlush2();
          #else
-         m_UART5.write(data, length);//WriteUART5(data, length);
+         WriteUART5(data, length);
          if (flush)
-            m_UART5.flush();//TXSerialFlush5();
+            TXSerialFlush5();
          #endif
          break;
       default:

Tools/FMGenerateFilterCoefficients.py

@@ -17,30 +17,30 @@ f2 = 2700
 rp = 0.2
 
 # scaling factor in bits, do not change !
-q = 15
+q = 0
 # scaling factor as facor...
 scaling_factor = 2**q
 
 # let's generate a sequence of 2nd order IIR filters
 sos = signal.cheby1(3,rp,[f1, f2],'bandpass', output='sos', fs=fs)
-#os = signal.cheby1(4, rp, f2, 'lowpass', output='sos', fs=fs) #deemphasis filter
+#sos = signal.cheby1(1, rp, 2122, 'lowpass', output='sos', fs=fs) #deemphasis filter
 #sos = signal.cheby1(1, rp, 2122, 'highpass', output='sos', fs=fs) #deemphasis filter
 
-sosrounded = np.round((sos) * scaling_factor)
+#sos = np.round((sos) * scaling_factor)
 
 # print coefficients
-for biquad in sosrounded:
+for biquad in sos:
     for coeff in biquad:
-        print(int(coeff),",",sep="",end="")
-        #print((coeff),",",sep="",end="")
+        #print(int(coeff),",",sep="",end="")
+        print((coeff),",",sep="",end="")
     print("")
 
 # plot the frequency response
 b,a = signal.sos2tf(sos)
-w,h = signal.freqz(b,a, worN=2048)
+w,h = signal.freqz(b,a)
 pl.plot(w/np.pi/2*fs,20*np.log(np.abs(h)))
 pl.xlabel('frequency/Hz');
 pl.ylabel('gain/dB');
-pl.ylim(top=1,bottom=-30);
+pl.ylim(top=1,bottom=-20);
 pl.xlim(left=250, right=12000);
 pl.show()

YSFTX.cpp

@@ -73,8 +73,7 @@ void CYSFTX::process()
         m_poBuffer[m_poLen++] = YSF_START_SYNC;
     } else {
       for (uint8_t i = 0U; i < YSF_FRAME_LENGTH_BYTES; i++) {
-        uint8_t c = 0U;
-        m_buffer.get(c);
+        uint8_t c = m_buffer.get();
         m_poBuffer[m_poLen++] = c;
       }
     }

YSFTX.h

@@ -21,7 +21,7 @@
 
 #include "Config.h"
 
-#include "RingBuffer.h"
+#include "SerialRB.h"
 
 class CYSFTX {
 public:
@@ -38,7 +38,7 @@ public:
   void setParams(bool on, uint8_t txHang);
 
 private:
-  CRingBuffer<uint8_t>                        m_buffer;
+  CSerialRB                        m_buffer;
   arm_fir_interpolate_instance_q15 m_modFilter;
   q15_t                            m_modState[16U];    // blockSize + phaseLength - 1, 4 + 9 - 1 plus some spare
   uint8_t                          m_poBuffer[1200U];

pins/pins_f4_drcc_nqf.h

@@ -22,36 +22,40 @@
 /*
 Pin definitions for DRCC_DVM BG7NQF  board rev1
 
-PTT      PB12   output
-LED_PTT  PB4    output
-LED_COS  PB5    output
-LED_SRV  PB10   output
-COS      PB13   input
+TX/PTT_LED  PB12   output
+RX/COS_LED  PB5    output
+STATUS_LED  PB10   output
 
-DSTAR    N/A
-DMR      N/A
-YSF      N/A
-P25      N/A
-NXDN     N/A
-POCSAG   N/A
+COS_IN      PB13   input
 
-MDSTAR   PB14   output
-MDMR     PB8    output
-MYSF     PB9    output
-MP25     PB15   output
-MNXDN    N/A
-MPOCSAG  N/A
+DSTAR       N/A
+DMR         N/A
+YSF         N/A
+P25         N/A
+NXDN        N/A
+POCSAG      N/A
 
-RX       PB0    analog input
-RSSI     PB1    analog input
-TX       PA4    analog output
+MDMR/BIT0   PB8    output
+MYSF/BIT1   PB9    output
+MDSTAR/BIT2 PB14   output
+MP25/BIT3   PB15   output          Generic Mode Pins
+MNXDN       N/A
+MPOCSAG     N/A
 
-EXT_CLK  PA15   input
+RX          PA0    analog input
+RSSI        PA1    analog input
+TX          PA4    analog output
 
-UART1_TX PA9    output
-UART1_RX PA10   output
-UART2_TX PA2    output
-UART2_RX PA3    output
+EXT_CLK     PA15   input
+
+UART1_TX    PA9    output
+UART1_RX    PA10   output          Host Data Communication
+
+UART2_TX    PA2    output
+UART2_RX    PA3    output          Nextion Data Communication
+
+I2C1_SCL    PB6    output
+I2C1_SDA    PB7    output          OLED Data Communication as master
 
 */
 
@@ -124,13 +128,13 @@ UART2_RX PA3    output
 
 #define PIN_RX            GPIO_Pin_0
 #define PIN_RX_CH         ADC_Channel_0
-#define PORT_RX           GPIOB
-#define RCC_Per_RX        RCC_AHB1Periph_GPIOB
+#define PORT_RX           GPIOA
+#define RCC_Per_RX        RCC_AHB1Periph_GPIOA
 
 #define PIN_RSSI          GPIO_Pin_1
 #define PIN_RSSI_CH       ADC_Channel_1
-#define PORT_RSSI         GPIOB
-#define RCC_Per_RSSI      RCC_AHB1Periph_GPIOB
+#define PORT_RSSI         GPIOA
+#define RCC_Per_RSSI      RCC_AHB1Periph_GPIOA
 
 #define PIN_TX            GPIO_Pin_4
 #define PIN_TX_CH         DAC_Channel_1