Implement Kerchunk TX option.

Add forgotten file for large frame handling

CalFM.cpp

@@ -52,7 +52,7 @@ void CCalFM::process()
 {
   const TONE_TABLE* entry = NULL;
 
-  if (m_modemState!=m_lastState)
+  if (m_modemState != m_lastState)
   {
     switch (m_modemState) {
         case STATE_FMCAL10K:

Config.h

@@ -35,6 +35,11 @@
 // For 19.2 MHz
 // #define EXTERNAL_OSC 19200000
 
+// Use a higher baudrate for host communication. Required for FM network !
+#define SERIAL_SPEED 115200 //suitable for most older boards (Arduino, Due STM32F1_POG etc). External FM will NOT work with this !
+// #define SERIAL_SPEED 230400 // Only works on newer board M4, M7, Teensy. External FM might work with this
+// #define SERIAL_SPEED 460800 // Only works on newer board M4, M7, Teensy. External FM should work with this
+
 // Allow the use of the COS line to lockout the modem
 // #define USE_COS_AS_LOCKOUT
 

DMRDMOTX.cpp

@@ -74,7 +74,7 @@ void CDMRDMOTX::process()
       m_poLen = m_txDelay;
     } else {
       for (unsigned int i = 0U; i < DMR_FRAME_LENGTH_BYTES; i++)
-        m_poBuffer[i] = m_fifo.get();
+        m_fifo.get(m_poBuffer[i]);
 
       for (unsigned int i = 0U; i < 39U; i++)
         m_poBuffer[i + DMR_FRAME_LENGTH_BYTES] = PR_FILL[i];

DMRDMOTX.h

@@ -23,7 +23,7 @@
 #include "Config.h"
 #include "DMRDefines.h"
 
-#include "SerialRB.h"
+#include "RingBuffer.h"
 
 class CDMRDMOTX {
 public:
@@ -38,7 +38,7 @@ public:
   uint8_t getSpace() const;
 
 private:
-  CSerialRB                        m_fifo;
+  CRingBuffer<uint8_t>                        m_fifo;
   arm_fir_interpolate_instance_q15 m_modFilter;
   q15_t                            m_modState[16U];    // blockSize + phaseLength - 1, 4 + 9 - 1 plus some spare
   uint8_t                          m_poBuffer[1200U];

DMRTX.cpp

@@ -293,7 +293,7 @@ void CDMRTX::createData(uint8_t slotIndex)
 {
   if (m_fifo[slotIndex].getData() >= DMR_FRAME_LENGTH_BYTES && m_frameCount >= STARTUP_COUNT && m_abortCount[slotIndex] >= ABORT_COUNT) {
     for (unsigned int i = 0U; i < DMR_FRAME_LENGTH_BYTES; i++) {
-      m_poBuffer[i]   = m_fifo[slotIndex].get();
+      m_fifo[slotIndex].get(m_poBuffer[i]);
       m_markBuffer[i] = MARK_NONE;
     }
   } else {

DMRTX.h

@@ -23,7 +23,7 @@
 #include "Config.h"
 #include "DMRDefines.h"
 
-#include "SerialRB.h"
+#include "RingBuffer.h"
 
 enum DMRTXSTATE {
   DMRTXSTATE_IDLE,
@@ -59,7 +59,7 @@ public:
   void setColorCode(uint8_t colorCode);
 
 private:
-  CSerialRB                        m_fifo[2U];
+  CRingBuffer<uint8_t>                        m_fifo[2U];
   arm_fir_interpolate_instance_q15 m_modFilter;
   q15_t                            m_modState[16U];    // blockSize + phaseLength - 1, 4 + 9 - 1 plus some spare
   DMRTXSTATE                       m_state;

DStarTX.cpp

@@ -216,12 +216,13 @@ void CDStarTX::process()
       for (uint16_t i = 0U; i < m_txDelay; i++)
         m_poBuffer[m_poLen++] = BIT_SYNC;
     } else {
+      uint8_t dummy;
       // Pop the type byte off
-      m_buffer.get();
+      m_buffer.get(dummy);
 
       uint8_t header[DSTAR_HEADER_LENGTH_BYTES];
       for (uint8_t i = 0U; i < DSTAR_HEADER_LENGTH_BYTES; i++)
-        header[i] = m_buffer.get();
+        m_buffer.get(header[i]);
 
       uint8_t buffer[86U];
       txHeader(header, buffer + 2U);
@@ -239,17 +240,19 @@ void CDStarTX::process()
  
   if (type == DSTAR_DATA && m_poLen == 0U) {
     // Pop the type byte off
-    m_buffer.get();
+    uint8_t dummy;
+    m_buffer.get(dummy);
 
     for (uint8_t i = 0U; i < DSTAR_DATA_LENGTH_BYTES; i++)
-      m_poBuffer[m_poLen++] = m_buffer.get();
+      m_buffer.get(m_poBuffer[m_poLen++]);
 
     m_poPtr = 0U;
   }
 
   if (type == DSTAR_EOT && m_poLen == 0U) {
     // Pop the type byte off
-    m_buffer.get();
+    uint8_t dummy;
+    m_buffer.get(dummy);
 
     for (uint8_t j = 0U; j < 3U; j++) {
       for (uint8_t i = 0U; i < DSTAR_EOT_LENGTH_BYTES; i++)

DStarTX.h

@@ -21,7 +21,7 @@
 
 #include "Config.h"
 
-#include "SerialRB.h"
+#include "RingBuffer.h"
 
 class CDStarTX {
 public:
@@ -38,7 +38,7 @@ public:
   uint8_t getSpace() const;
 
 private:
-  CSerialRB                        m_buffer;
+  CRingBuffer<uint8_t>             m_buffer;
   arm_fir_interpolate_instance_q15 m_modFilter;
   q15_t                            m_modState[20U];    // blockSize + phaseLength - 1, 8 + 9 - 1 plus some spare
   uint8_t                          m_poBuffer[600U];

FM.cpp

@@ -20,9 +20,16 @@
 #include "Globals.h"
 #include "FM.h"
 
+
+const uint16_t FM_TX_BLOCK_SIZE = 100U;
+const uint16_t FM_SERIAL_BLOCK_SIZE = 84U;//this is the number of sample pairs to send over serial. One sample pair is 3bytes.
+                                          //three times this value shall never exceed 252
+const uint16_t FM_SERIAL_BLOCK_SIZE_BYTES = FM_SERIAL_BLOCK_SIZE * 3U;
+
 CFM::CFM() :
 m_callsign(),
 m_rfAck(),
+m_extAck(),
 m_ctcssRX(),
 m_ctcssTX(),
 m_timeoutTone(),
@@ -38,6 +45,7 @@ m_kerchunkTX(true),
 m_ackMinTimer(),
 m_ackDelayTimer(),
 m_hangTimer(),
+m_statusTimer(),
 m_filterStage1(  724,   1448,   724, 32768, -37895, 21352),//3rd order Cheby Filter 300 to 2700Hz, 0.2dB passband ripple, sampling rate 24kHz
 m_filterStage2(32768,      0,-32768, 32768, -50339, 19052),
 m_filterStage3(32768, -65536, 32768, 32768, -64075, 31460),
@@ -45,15 +53,20 @@ m_blanking(),
 m_useCOS(true),
 m_cosInvert(false),
 m_rfAudioBoost(1U),
-m_downsampler(128U),//Size might need adjustement
+m_extAudioBoost(1U),
+m_downsampler(400U),// 100 ms of audio
+m_extEnabled(false),
 m_rxLevel(1),
-m_inputRB(4800U),   // 200ms of audio
-m_outputRB(2400U)   // 100ms of audio
+m_inputRFRB(2401U),   // 100ms of audio + 1 sample
+m_outputRFRB(2400U),  // 100ms of audio
+m_inputExtRB()
 {
+  m_statusTimer.setTimeout(1U, 0U);
+
   insertDelay(100U);
 }
 
-void CFM::samples(bool cos, const q15_t* samples, uint8_t length)
+void CFM::samples(bool cos, q15_t* samples, uint8_t length)
 {
   if (m_useCOS) {
     if (m_cosInvert)
@@ -67,74 +80,117 @@ void CFM::samples(bool cos, const q15_t* samples, uint8_t length)
   uint8_t i = 0U;
   for (; i < length; i++) {
     // ARMv7-M has hardware integer division 
-    q15_t currentSample = q15_t((q31_t(samples[i]) << 8) / m_rxLevel);
-
-    uint8_t ctcssState = m_ctcssRX.process(currentSample);
+    q15_t currentRFSample = q15_t((q31_t(samples[i]) << 8) / m_rxLevel);
+    uint8_t ctcssState = m_ctcssRX.process(currentRFSample);
 
     if (!m_useCOS) {
       // Delay the audio by 100ms to better match the CTCSS detector output
-      m_inputRB.put(currentSample);
-      m_inputRB.get(currentSample);
+      m_inputRFRB.put(currentRFSample);
+      m_inputRFRB.get(currentRFSample);
     }
 
-    if (CTCSS_NOT_READY(ctcssState) && m_modemState != STATE_FM) {
-      //Not enough samples to determine if you have CTCSS, just carry on
+    q15_t currentExtSample;
+    bool inputExt = m_inputExtRB.getSample(currentExtSample);//always consume the external input data so it does not overflow
+    inputExt = inputExt && m_extEnabled;
+
+    if (!inputExt && (CTCSS_NOT_READY(ctcssState)) && m_modemState != STATE_FM) {
+      //Not enough samples to determine if you have CTCSS, just carry on. But only if we haven't any external data in the queue
       continue;
-    } else if (CTCSS_READY(ctcssState) && m_modemState != STATE_FM) {
+    } else if ((inputExt || CTCSS_READY(ctcssState)) && m_modemState != STATE_FM) {
       //we had enough samples for CTCSS and we are in some other mode than FM
       bool validCTCSS = CTCSS_VALID(ctcssState);
-      stateMachine(validCTCSS && cos);
+      stateMachine(validCTCSS && cos, inputExt);
       if (m_modemState != STATE_FM)
         continue;
-    } else if (CTCSS_READY(ctcssState) && m_modemState == STATE_FM) {
-      //We had enough samples for CTCSS and we are in FM mode, trigger the state machine
-      bool validCTCSS = CTCSS_VALID(ctcssState);
-      stateMachine(validCTCSS && cos);
-      if (m_modemState != STATE_FM)
-        break;
-    } else if (CTCSS_NOT_READY(ctcssState) && m_modemState == STATE_FM && i == length - 1) {
+    } else if ((inputExt || CTCSS_NOT_READY(ctcssState)) && m_modemState == STATE_FM && i == length - 1) {
       //Not enough samples for CTCSS but we already are in FM, trigger the state machine
       //but do not trigger the state machine on every single sample, save CPU!
       bool validCTCSS = CTCSS_VALID(ctcssState);
-      stateMachine(validCTCSS && cos);
+      stateMachine(validCTCSS && cos, inputExt);
     }
 
-    // Only let audio through when relaying audio
-    if (m_state == FS_RELAYING || m_state == FS_KERCHUNK) {  
-      // m_downsampler.addSample(currentSample);
+    q15_t currentSample = currentRFSample;
+    q15_t currentBoost  = m_rfAudioBoost;
+    if (m_state == FS_RELAYING_EXT || m_state == FS_KERCHUNK_EXT) {
+      currentSample = currentExtSample;
+      currentBoost  = m_extAudioBoost;
+    }
+
+    // Only let RF audio through when relaying RF audio
+    if (m_state == FS_RELAYING_RF || m_state == FS_KERCHUNK_RF || m_state == FS_RELAYING_EXT || m_state == FS_KERCHUNK_EXT) {
       currentSample = m_blanking.process(currentSample);
-      currentSample *= m_rfAudioBoost;
+      if (m_extEnabled && (m_state == FS_RELAYING_RF || m_state == FS_KERCHUNK_RF))
+        m_downsampler.addSample(currentSample);
+
+      currentSample *= currentBoost;
     } else {
       currentSample = 0;
     }
 
-    if (!m_callsign.isRunning())
+    if (!m_callsign.isRunning() && !m_extAck.isRunning())
       currentSample += m_rfAck.getHighAudio();
-    
-    if (!m_rfAck.isRunning()) {
+
+    if (!m_callsign.isRunning() && !m_rfAck.isRunning())
+      currentSample += m_extAck.getHighAudio();
+
+    if (!m_rfAck.isRunning() && !m_extAck.isRunning()) {
       if (m_state == FS_LISTENING)
         currentSample += m_callsign.getHighAudio();
       else
         currentSample += m_callsign.getLowAudio();
     }
 
-    if (!m_callsign.isRunning() && !m_rfAck.isRunning())
+    if (!m_callsign.isRunning() && !m_rfAck.isRunning() && !m_extAck.isRunning())
       currentSample += m_timeoutTone.getAudio();
 
     currentSample = m_filterStage3.filter(m_filterStage2.filter(m_filterStage1.filter(currentSample)));
 
     currentSample += m_ctcssTX.getAudio();
 
-    if (m_modemState == STATE_FM)
-      m_outputRB.put(currentSample);
+    m_outputRFRB.put(currentSample);
   }
 }
 
 void CFM::process()
 {
-  q15_t sample;
-  while (io.getSpace() >= 3U && m_outputRB.get(sample))
-    io.write(STATE_FM, &sample, 1U);
+  uint16_t space = io.getSpace();
+  uint16_t length = m_outputRFRB.getData();
+
+  if (space > 10U && length >= FM_TX_BLOCK_SIZE ) {
+    space -= 2U;
+    if (length > FM_TX_BLOCK_SIZE)
+      length = FM_TX_BLOCK_SIZE;
+    if (space > FM_TX_BLOCK_SIZE)
+      space = FM_TX_BLOCK_SIZE;
+    if (length > space)
+      length = space;
+
+    q15_t samples[FM_TX_BLOCK_SIZE];
+
+    for (uint16_t i = 0U; i < length; i++) {
+      q15_t sample = 0;
+      m_outputRFRB.get(sample);
+      samples[i] = sample;
+    }
+
+    io.write(STATE_FM, samples, length);
+  }
+
+  if (m_extEnabled) {
+    uint16_t length = m_downsampler.getData();
+
+    if (length >= FM_SERIAL_BLOCK_SIZE) {
+      if (length > FM_SERIAL_BLOCK_SIZE)
+        length = FM_SERIAL_BLOCK_SIZE;
+        
+      TSamplePairPack serialSamples[FM_SERIAL_BLOCK_SIZE];
+
+      for (uint16_t j = 0U; j < length; j++)
+        m_downsampler.getPackedData(serialSamples[j]);
+
+      serial.writeFMData((uint8_t*)serialSamples, length * sizeof(TSamplePairPack));
+    }
+  }
 }
 
 void CFM::reset()
@@ -147,13 +203,18 @@ void CFM::reset()
   m_ackMinTimer.stop();
   m_ackDelayTimer.stop();
   m_hangTimer.stop();
+  m_statusTimer.stop();
 
   m_ctcssRX.reset();
   m_rfAck.stop();
+  m_extAck.stop();
   m_callsign.stop();
   m_timeoutTone.stop();
 
-  m_outputRB.reset();
+  m_outputRFRB.reset();
+  m_inputExtRB.reset();
+
+  m_downsampler.reset();
 }
 
 uint8_t CFM::setCallsign(const char* callsign, uint8_t speed, uint16_t frequency, uint8_t time, uint8_t holdoff, uint8_t highLevel, uint8_t lowLevel, bool callsignAtStart, bool callsignAtEnd, bool callsignAtLatch)
@@ -210,45 +271,61 @@ uint8_t CFM::setMisc(uint16_t timeout, uint8_t timeoutLevel, uint8_t ctcssFreque
   return m_ctcssTX.setParams(ctcssFrequency, ctcssLevel);
 }
 
-void CFM::stateMachine(bool validSignal)
+uint8_t CFM::setExt(const char* ack, uint8_t audioBoost, uint8_t speed, uint16_t frequency, uint8_t level)
+{
+  m_extEnabled = true;
+
+  m_extAudioBoost = q15_t(audioBoost);
+
+  return m_extAck.setParams(ack, speed, frequency, level, level);
+}
+
+void CFM::stateMachine(bool validRFSignal, bool validExtSignal)
 {
   switch (m_state) {
     case FS_LISTENING:
-      listeningState(validSignal);
+      listeningState(validRFSignal, validExtSignal);
       break;
-    case FS_KERCHUNK:
-      kerchunkState(validSignal);
+    case FS_KERCHUNK_RF:
+      kerchunkRFState(validRFSignal);
       break;
-    case FS_RELAYING:
-      relayingState(validSignal);
+    case FS_RELAYING_RF:
+      relayingRFState(validRFSignal);
       break;
-    case FS_RELAYING_WAIT:
-      relayingWaitState(validSignal);
+    case FS_RELAYING_WAIT_RF:
+      relayingRFWaitState(validRFSignal);
       break;
-    case FS_TIMEOUT:
-      timeoutState(validSignal);
+    case FS_TIMEOUT_RF:
+      timeoutRFState(validRFSignal);
       break;
-    case FS_TIMEOUT_WAIT:
-      timeoutWaitState(validSignal);
+    case FS_TIMEOUT_WAIT_RF:
+      timeoutRFWaitState(validRFSignal);
+      break;
+    case FS_KERCHUNK_EXT:
+      kerchunkExtState(validExtSignal);
+      break;
+    case FS_RELAYING_EXT:
+      relayingExtState(validExtSignal);
+      break;
+    case FS_RELAYING_WAIT_EXT:
+      relayingExtWaitState(validExtSignal);
+      break;
+    case FS_TIMEOUT_EXT:
+      timeoutExtState(validExtSignal);
+      break;
+    case FS_TIMEOUT_WAIT_EXT:
+      timeoutExtWaitState(validExtSignal);
       break;
     case FS_HANG:
-      hangState(validSignal);
+      hangState(validRFSignal, validExtSignal);
       break;
     default:
       break;
   }
 
-  if (m_state == FS_LISTENING && m_modemState == STATE_FM) {
-    if (!m_callsign.isWanted() && !m_rfAck.isWanted()) {
-      DEBUG1("Change to STATE_IDLE");
-      m_modemState = STATE_IDLE;
-      m_callsignTimer.stop();
-      m_timeoutTimer.stop();
-      m_kerchunkTimer.stop();
-      m_ackMinTimer.stop();
-      m_ackDelayTimer.stop();
-      m_hangTimer.stop();
-    }
+  if (m_state == FS_LISTENING && !m_rfAck.isWanted() && !m_extAck.isWanted() && !m_callsign.isWanted()) {
+    m_outputRFRB.reset();
+    m_downsampler.reset();
   }
 }
 
@@ -261,25 +338,31 @@ void CFM::clock(uint8_t length)
   m_ackMinTimer.clock(length);
   m_ackDelayTimer.clock(length);
   m_hangTimer.clock(length);
+  m_statusTimer.clock(length);
+
+  if (m_statusTimer.isRunning() && m_statusTimer.hasExpired()) {
+    serial.writeFMStatus(m_state);
+    m_statusTimer.start();
+  }
 }
 
-void CFM::listeningState(bool validSignal)
+void CFM::listeningState(bool validRFSignal, bool validExtSignal)
 {
-  if (validSignal) {
+  if (validRFSignal) {
     if (m_kerchunkTimer.getTimeout() > 0U) {
-      DEBUG1("State to KERCHUNK");
-      m_state = FS_KERCHUNK;
+      DEBUG1("State to KERCHUNK_RF");
+      m_state = FS_KERCHUNK_RF;
       m_kerchunkTimer.start();
       if (m_callsignAtStart && !m_callsignAtLatch)
         sendCallsign();
     } else {
-      DEBUG1("State to RELAYING");
-      m_state = FS_RELAYING;
+      DEBUG1("State to RELAYING_RF");
+      m_state = FS_RELAYING_RF;
       if (m_callsignAtStart)
         sendCallsign();
     }
 
-    if (m_state == FS_RELAYING || (m_state == FS_KERCHUNK && m_kerchunkTX)) {
+    if (m_state == FS_RELAYING_RF || (m_state == FS_KERCHUNK_RF && m_kerchunkTX)) {
       insertSilence(50U);
 
       beginRelaying();
@@ -289,23 +372,43 @@ void CFM::listeningState(bool validSignal)
       io.setDecode(true);
       io.setADCDetection(true);
 
-      DEBUG1("Change to STATE_FM");
-      m_modemState = STATE_FM;
+      m_statusTimer.start();
+      serial.writeFMStatus(m_state);
+    }
+  } else if (validExtSignal) {
+    if (m_kerchunkTimer.getTimeout() > 0U) {
+      DEBUG1("State to KERCHUNK_EXT");
+      m_state = FS_KERCHUNK_EXT;
+      m_kerchunkTimer.start();
+      if (m_callsignAtStart && !m_callsignAtLatch)
+        sendCallsign();
+    } else {
+      DEBUG1("State to RELAYING_EXT");
+      m_state = FS_RELAYING_EXT;
+      if (m_callsignAtStart)
+        sendCallsign();
+    }
+
+    if (m_state == FS_RELAYING_EXT || (m_state == FS_KERCHUNK_EXT && m_kerchunkTX)) {
+      insertSilence(50U);
+
+      beginRelaying();
+
+      m_callsignTimer.start();
+
+      m_statusTimer.start();
+      serial.writeFMStatus(m_state);
     }
   }
 }
 
-void CFM::kerchunkState(bool validSignal)
+void CFM::kerchunkRFState(bool validSignal)
 {
   if (validSignal) {
     if (m_kerchunkTimer.hasExpired()) {
-      DEBUG1("State to RELAYING");
-      m_state = FS_RELAYING;
+      DEBUG1("State to RELAYING_RF");
+      m_state = FS_RELAYING_RF;
       m_kerchunkTimer.stop();
-      if (m_callsignAtStart && m_callsignAtLatch) {
-        sendCallsign();
-        m_callsignTimer.start();
-      }
       if (!m_kerchunkTX) {
         insertSilence(50U);
 
@@ -316,8 +419,12 @@ void CFM::kerchunkState(bool validSignal)
         io.setDecode(true);
         io.setADCDetection(true);
 
-        DEBUG1("Change to STATE_FM");
-        m_modemState = STATE_FM;
+        m_statusTimer.start();
+        serial.writeFMStatus(m_state);
+      }
+      if (m_callsignAtStart && m_callsignAtLatch) {
+        sendCallsign();
+        m_callsignTimer.start();
       }
     }
   } else {
@@ -330,26 +437,36 @@ void CFM::kerchunkState(bool validSignal)
     m_timeoutTimer.stop();
     m_ackMinTimer.stop();
     m_callsignTimer.stop();
+    m_statusTimer.stop();
+
+    if (m_extEnabled)
+      serial.writeFMEOT();
   }
 }
 
-void CFM::relayingState(bool validSignal)
+void CFM::relayingRFState(bool validSignal)
 {
   if (validSignal) {
     if (m_timeoutTimer.isRunning() && m_timeoutTimer.hasExpired()) {
-      DEBUG1("State to TIMEOUT");
-      m_state = FS_TIMEOUT;
+      DEBUG1("State to TIMEOUT_RF");
+      m_state = FS_TIMEOUT_RF;
       m_ackMinTimer.stop();
       m_timeoutTimer.stop();
       m_timeoutTone.start();
+
+      if (m_extEnabled)
+        serial.writeFMEOT();
     }
   } else {
     io.setDecode(false);
     io.setADCDetection(false);
 
-    DEBUG1("State to RELAYING_WAIT");
-    m_state = FS_RELAYING_WAIT;
+    DEBUG1("State to RELAYING_WAIT_RF");
+    m_state = FS_RELAYING_WAIT_RF;
     m_ackDelayTimer.start();
+
+    if (m_extEnabled)
+      serial.writeFMEOT();
   }
 
   if (m_callsignTimer.isRunning() && m_callsignTimer.hasExpired()) {
@@ -358,14 +475,14 @@ void CFM::relayingState(bool validSignal)
   }
 }
 
-void CFM::relayingWaitState(bool validSignal)
+void CFM::relayingRFWaitState(bool validSignal)
 {
   if (validSignal) {
     io.setDecode(true);
     io.setADCDetection(true);
 
-    DEBUG1("State to RELAYING");
-    m_state = FS_RELAYING;
+    DEBUG1("State to RELAYING_RF");
+    m_state = FS_RELAYING_RF;
     m_ackDelayTimer.stop();
   } else {
     if (m_ackDelayTimer.isRunning() && m_ackDelayTimer.hasExpired()) {
@@ -374,12 +491,12 @@ void CFM::relayingWaitState(bool validSignal)
 
       if (m_ackMinTimer.isRunning()) {
         if (m_ackMinTimer.hasExpired()) {
-          DEBUG1("Send ack");
+          DEBUG1("Send RF ack");
           m_rfAck.start();
           m_ackMinTimer.stop();
         }
       } else {
-          DEBUG1("Send ack");
+          DEBUG1("Send RF ack");
           m_rfAck.start();
           m_ackMinTimer.stop();
       }
@@ -396,44 +513,52 @@ void CFM::relayingWaitState(bool validSignal)
   }
 }
 
-void CFM::hangState(bool validSignal)
+void CFM::kerchunkExtState(bool validSignal)
 {
   if (validSignal) {
-    io.setDecode(true);
-    io.setADCDetection(true);
+    if (m_kerchunkTimer.hasExpired()) {
+      DEBUG1("State to RELAYING_EXT");
+      m_state = FS_RELAYING_EXT;
+      m_kerchunkTimer.stop();
+      if (!m_kerchunkTX) {
+        insertSilence(50U);
 
-    DEBUG1("State to RELAYING");
-    m_state = FS_RELAYING;
-    DEBUG1("Stop ack");
-    m_rfAck.stop();
-    beginRelaying();
-  } else {
-    if (m_hangTimer.isRunning() && m_hangTimer.hasExpired()) {
-      DEBUG1("State to LISTENING");
-      m_state = FS_LISTENING;
-      m_hangTimer.stop();
+        beginRelaying();
 
-      if (m_callsignAtEnd)
+        m_callsignTimer.start();
+
+        m_statusTimer.start();
+        serial.writeFMStatus(m_state);
+      }
+      if (m_callsignAtStart && m_callsignAtLatch) {
         sendCallsign();
-
-      m_callsignTimer.stop();
+        m_callsignTimer.start();
+      }
     }
-  }
-
-  if (m_callsignTimer.isRunning() && m_callsignTimer.hasExpired()) {
-    sendCallsign();
-    m_callsignTimer.start();
+  } else {
+    DEBUG1("State to LISTENING");
+    m_state = FS_LISTENING;
+    m_kerchunkTimer.stop();
+    m_timeoutTimer.stop();
+    m_ackMinTimer.stop();
+    m_callsignTimer.stop();
+    m_statusTimer.stop();
   }
 }
 
-void CFM::timeoutState(bool validSignal)
+void CFM::relayingExtState(bool validSignal)
 {
-  if (!validSignal) {
-    io.setDecode(false);
-    io.setADCDetection(false);
-
-    DEBUG1("State to TIMEOUT_WAIT");
-    m_state = FS_TIMEOUT_WAIT;
+  if (validSignal) {
+    if (m_timeoutTimer.isRunning() && m_timeoutTimer.hasExpired()) {
+      DEBUG1("State to TIMEOUT_EXT");
+      m_state = FS_TIMEOUT_EXT;
+      m_ackMinTimer.stop();
+      m_timeoutTimer.stop();
+      m_timeoutTone.start();
+    }
+  } else {
+    DEBUG1("State to RELAYING_WAIT_EXT");
+    m_state = FS_RELAYING_WAIT_EXT;
     m_ackDelayTimer.start();
   }
 
@@ -443,21 +568,117 @@ void CFM::timeoutState(bool validSignal)
   }
 }
 
-void CFM::timeoutWaitState(bool validSignal)
+void CFM::relayingExtWaitState(bool validSignal)
+{
+  if (validSignal) {
+    DEBUG1("State to RELAYING_EXT");
+    m_state = FS_RELAYING_EXT;
+    m_ackDelayTimer.stop();
+  } else {
+    if (m_ackDelayTimer.isRunning() && m_ackDelayTimer.hasExpired()) {
+      DEBUG1("State to HANG");
+      m_state = FS_HANG;
+
+      if (m_ackMinTimer.isRunning()) {
+        if (m_ackMinTimer.hasExpired()) {
+          DEBUG1("Send Ext ack");
+          m_extAck.start();
+          m_ackMinTimer.stop();
+        }
+      } else {
+          DEBUG1("Send Ext ack");
+          m_extAck.start();
+          m_ackMinTimer.stop();
+      }
+
+      m_ackDelayTimer.stop();
+      m_timeoutTimer.stop();
+      m_hangTimer.start();
+    }
+  }
+
+  if (m_callsignTimer.isRunning() && m_callsignTimer.hasExpired()) {
+    sendCallsign();
+    m_callsignTimer.start();
+  }
+}
+
+void CFM::hangState(bool validRFSignal, bool validExtSignal)
+{
+  if (validRFSignal) {
+    io.setDecode(true);
+    io.setADCDetection(true);
+
+    DEBUG1("State to RELAYING_RF");
+    m_state = FS_RELAYING_RF;
+    DEBUG1("Stop ack");
+    m_rfAck.stop();
+    m_extAck.stop();
+    beginRelaying();
+  } else if (validExtSignal) {
+    DEBUG1("State to RELAYING_EXT");
+    m_state = FS_RELAYING_EXT;
+    DEBUG1("Stop ack");
+    m_rfAck.stop();
+    m_extAck.stop();
+    beginRelaying();
+  } else {
+    if (m_hangTimer.isRunning() && m_hangTimer.hasExpired()) {
+      DEBUG1("State to LISTENING");
+      m_state = FS_LISTENING;
+      m_hangTimer.stop();
+      m_statusTimer.stop();
+
+      if (m_callsignAtEnd)
+        sendCallsign();
+
+      m_callsignTimer.stop();
+
+    }
+  }
+
+  if (m_callsignTimer.isRunning() && m_callsignTimer.hasExpired()) {
+    sendCallsign();
+    m_callsignTimer.start();
+  }
+}
+
+void CFM::timeoutRFState(bool validSignal)
+{
+  if (!validSignal) {
+    io.setDecode(false);
+    io.setADCDetection(false);
+
+    DEBUG1("State to TIMEOUT_WAIT_RF");
+    m_state = FS_TIMEOUT_WAIT_RF;
+
+    if (m_callsignAtEnd)
+        sendCallsign();
+
+    m_ackDelayTimer.start();
+  }
+
+  if (m_callsignTimer.isRunning() && m_callsignTimer.hasExpired()) {
+    sendCallsign();
+    m_callsignTimer.start();
+  }
+}
+
+void CFM::timeoutRFWaitState(bool validSignal)
 {
   if (validSignal) {
     io.setDecode(true);
     io.setADCDetection(true);
 
-    DEBUG1("State to TIMEOUT");
-    m_state = FS_TIMEOUT;
+    DEBUG1("State to TIMEOUT_RF");
+    m_state = FS_TIMEOUT_RF;
     m_ackDelayTimer.stop();
   } else {
     if (m_ackDelayTimer.isRunning() && m_ackDelayTimer.hasExpired()) {
       DEBUG1("State to HANG");
       m_state = FS_HANG;
       m_timeoutTone.stop();
-      DEBUG1("Send ack");
+      DEBUG1("Send RF ack");
       m_rfAck.start();
       m_ackDelayTimer.stop();
       m_ackMinTimer.stop();
@@ -472,6 +693,45 @@ void CFM::timeoutWaitState(bool validSignal)
   }
 }
 
+void CFM::timeoutExtState(bool validSignal)
+{
+  if (!validSignal) {
+    DEBUG1("State to TIMEOUT_WAIT_EXT");
+    m_state = FS_TIMEOUT_WAIT_EXT;
+    m_ackDelayTimer.start();
+  }
+
+  if (m_callsignTimer.isRunning() && m_callsignTimer.hasExpired()) {
+    sendCallsign();
+    m_callsignTimer.start();
+  }
+}
+
+void CFM::timeoutExtWaitState(bool validSignal)
+{
+  if (validSignal) {
+    DEBUG1("State to TIMEOUT_EXT");
+    m_state = FS_TIMEOUT_EXT;
+    m_ackDelayTimer.stop();
+  } else {
+    if (m_ackDelayTimer.isRunning() && m_ackDelayTimer.hasExpired()) {
+      DEBUG1("State to HANG");
+      m_state = FS_HANG;
+      m_timeoutTone.stop();
+      DEBUG1("Send Ext ack");
+      m_extAck.start();
+      m_ackDelayTimer.stop();
+      m_ackMinTimer.stop();
+      m_timeoutTimer.stop();
+      m_hangTimer.start();
+    }
+  }
+
+  if (m_callsignTimer.isRunning() && m_callsignTimer.hasExpired()) {
+    sendCallsign();
+    m_callsignTimer.start();
+  }
+}
 void CFM::sendCallsign()
 {
   if (m_holdoffTimer.isRunning()) {
@@ -492,12 +752,25 @@ void CFM::beginRelaying()
   m_ackMinTimer.start();
 }
 
+uint8_t CFM::getSpace() const
+{
+  // The amount of free space for receiving external audio, in frames.
+  return m_inputExtRB.getSpace() / FM_SERIAL_BLOCK_SIZE_BYTES;
+}
+
+uint8_t CFM::writeData(const uint8_t* data, uint8_t length)
+{
+  //todo check if length is a multiple of 3
+  m_inputExtRB.addData(data, length);
+  return 0U;
+}
+
 void CFM::insertDelay(uint16_t ms)
 {
   uint32_t nSamples = ms * 24U;
 
   for (uint32_t i = 0U; i < nSamples; i++)
-    m_inputRB.put(0);
+    m_inputRFRB.put(0);
 }
 
 void CFM::insertSilence(uint16_t ms)
@@ -505,5 +778,5 @@ void CFM::insertSilence(uint16_t ms)
   uint32_t nSamples = ms * 24U;
 
   for (uint32_t i = 0U; i < nSamples; i++)
-    m_outputRB.put(0);
+    m_outputRFRB.put(0);
 }

FM.h

@@ -27,28 +27,32 @@
 #include "FMTimeout.h"
 #include "FMKeyer.h"
 #include "FMTimer.h"
-#include "FMRB.h"
+#include "RingBuffer.h"
 #include "FMDirectForm1.h"
 #include "FMDownsampler.h"
+#include "FMUpSampler.h"
 
 enum FM_STATE {
   FS_LISTENING,
-  FS_KERCHUNK,
-  FS_RELAYING,
-  FS_RELAYING_WAIT,
-  FS_TIMEOUT,
-  FS_TIMEOUT_WAIT,
+  FS_KERCHUNK_RF,
+  FS_RELAYING_RF,
+  FS_RELAYING_WAIT_RF,
+  FS_TIMEOUT_RF,
+  FS_TIMEOUT_WAIT_RF,
+  FS_KERCHUNK_EXT,
+  FS_RELAYING_EXT,
+  FS_RELAYING_WAIT_EXT,
+  FS_TIMEOUT_EXT,
+  FS_TIMEOUT_WAIT_EXT,
   FS_HANG
 };
 
 
-
-
 class CFM {
 public:
   CFM();
 
-  void samples(bool cos, const q15_t* samples, uint8_t length);
+  void samples(bool cos, q15_t* samples, uint8_t length);
 
   void process();
 
@@ -57,10 +61,16 @@ public:
   uint8_t setCallsign(const char* callsign, uint8_t speed, uint16_t frequency, uint8_t time, uint8_t holdoff, uint8_t highLevel, uint8_t lowLevel, bool callsignAtStart, bool callsignAtEnd, bool callsignAtLatch);
   uint8_t setAck(const char* rfAck, uint8_t speed, uint16_t frequency, uint8_t minTime, uint16_t delay, uint8_t level);
   uint8_t setMisc(uint16_t timeout, uint8_t timeoutLevel, uint8_t ctcssFrequency, uint8_t ctcssHighThreshold, uint8_t ctcssLowThreshold, uint8_t ctcssLevel, uint8_t kerchunkTime, bool kerchunkTX, uint8_t hangTime, bool useCOS, bool cosInvert, uint8_t rfAudioBoost, uint8_t maxDev, uint8_t rxLevel);
+  uint8_t setExt(const char* ack, uint8_t audioBoost, uint8_t speed, uint16_t frequency, uint8_t level);
+
+  uint8_t getSpace() const;
+
+  uint8_t writeData(const uint8_t* data, uint8_t length);
 
 private:
   CFMKeyer             m_callsign;
   CFMKeyer             m_rfAck;
+  CFMKeyer             m_extAck;
   CFMCTCSSRX           m_ctcssRX;
   CFMCTCSSTX           m_ctcssTX;
   CFMTimeout           m_timeoutTone;
@@ -76,6 +86,7 @@ private:
   CFMTimer             m_ackMinTimer;
   CFMTimer             m_ackDelayTimer;
   CFMTimer             m_hangTimer;
+  CFMTimer             m_statusTimer;
   CFMDirectFormI       m_filterStage1;
   CFMDirectFormI       m_filterStage2;
   CFMDirectFormI       m_filterStage3;
@@ -83,19 +94,27 @@ private:
   bool                 m_useCOS;
   bool                 m_cosInvert;
   q15_t                m_rfAudioBoost;
+  q15_t                m_extAudioBoost;
   CFMDownsampler       m_downsampler;
+  bool                 m_extEnabled;
   q15_t                m_rxLevel;
-  CFMRB                m_inputRB;
-  CFMRB                m_outputRB;
+  CRingBuffer<q15_t>   m_inputRFRB;
+  CRingBuffer<q15_t>   m_outputRFRB;
+  CFMUpSampler         m_inputExtRB;
 
-  void stateMachine(bool validSignal);
-  void listeningState(bool validSignal);
-  void kerchunkState(bool validSignal);
-  void relayingState(bool validSignal);
-  void relayingWaitState(bool validSignal);
-  void timeoutState(bool validSignal);
-  void timeoutWaitState(bool validSignal);
-  void hangState(bool validSignal);
+  void stateMachine(bool validRFSignal, bool validExtSignal);
+  void listeningState(bool validRFSignal, bool validExtSignal);
+  void kerchunkRFState(bool validSignal);
+  void relayingRFState(bool validSignal);
+  void relayingRFWaitState(bool validSignal);
+  void timeoutRFState(bool validSignal);
+  void timeoutRFWaitState(bool validSignal);
+  void kerchunkExtState(bool validSignal);
+  void relayingExtState(bool validSignal);
+  void relayingExtWaitState(bool validSignal);
+  void timeoutExtState(bool validSignal);
+  void timeoutExtWaitState(bool validSignal);
+  void hangState(bool validRFSignal, bool validExtSignal);
 
   void clock(uint8_t length);
 

FMDirectForm1.h

@@ -29,7 +29,7 @@ THE SOFTWARE.
 
 // based on https://raw.githubusercontent.com/berndporr/iir_fixed_point/master/DirectFormI.h
 
-#include "Globals.h"
+#include <cstdint>
 
 #ifndef DIRECTFORMI_H_
 #define DIRECTFORMI_H_

FMDownsampler.cpp

@@ -20,44 +20,55 @@
 #include "Config.h"
 #include "FMDownsampler.h"
 
-
 CFMDownsampler::CFMDownsampler(uint16_t length) :
-m_ringBuffer(length),//length might need tweaking
-m_packIndex(0),
-m_downSampleIndex(0)
+m_ringBuffer(length),
+m_samplePack(0U),
+m_samplePackPointer(NULL),
+m_sampleIndex(0U)
 {
-    m_samplePack = 0;
+  m_samplePackPointer = (uint8_t*)&m_samplePack;
 }
 
 void CFMDownsampler::addSample(q15_t sample)
 {
-    //only take one of three samples
-    if(m_downSampleIndex == 0) {
-      switch(m_packIndex){
-        case 0:
-          m_samplePack = int32_t(sample) << 12;
-        break;
-        case 1:{
-            m_samplePack |= int32_t(sample);
-            
-            //we did not use MSB; skip it
-            m_ringBuffer.put(m_samplePackBytes[1]); 
-            m_ringBuffer.put(m_samplePackBytes[2]); 
-            m_ringBuffer.put(m_samplePackBytes[3]); 
+  uint32_t usample = uint32_t(int32_t(sample) + 2048);
+  //only take one of three samples
+  switch(m_sampleIndex){
+    case 0:
+      m_samplePack = usample << 12;
+    break;
+    case 3:{
+      m_samplePack |= usample;
+      
+      //we did not use MSB; skip it
+      TSamplePairPack pair{m_samplePackPointer[0U], m_samplePackPointer[1U], m_samplePackPointer[2U]}; 
 
-            m_samplePack = 0;
-        }
-        break;
-        default:
-            //should never happen
-        break;
-        }
-        m_packIndex++;
-        if(m_packIndex >= 2)
-            m_packIndex = 0;  
+      m_ringBuffer.put(pair);
+
+      m_samplePack = 0U;//reset the sample pack
     }
+    break;
+    default:
+        //Just skip this sample
+    break;
+  }
 
-    m_downSampleIndex++;
-    if(m_downSampleIndex >= 3)
-        m_downSampleIndex = 0;
+  m_sampleIndex++;
+  if(m_sampleIndex >= 6U)//did we pack two samples ?
+      m_sampleIndex = 0U;  
+}
+
+bool CFMDownsampler::getPackedData(TSamplePairPack& data)
+{
+  return m_ringBuffer.get(data);
+}
+
+uint16_t CFMDownsampler::getData()
+{
+  return m_ringBuffer.getData();
+}
+
+void CFMDownsampler::reset()
+{
+  m_sampleIndex = 0U;
 }

FMDownsampler.h

@@ -21,23 +21,22 @@
 #define FMDOWNSAMPLER_H
 
 #include "Config.h"
-#include "FMDownsampleRB.h"
+#include "RingBuffer.h"
+#include "FMSamplePairPack.h"
 
 class CFMDownsampler {
 public:
   CFMDownsampler(uint16_t length);
   void addSample(q15_t sample);
-  inline bool getPackedData(uint8_t& data){ return m_ringBuffer.get(data); };
-  inline bool hasOverflowed() { return m_ringBuffer.hasOverflowed(); };
+  bool getPackedData(TSamplePairPack& data);
+  uint16_t getData();
+  void reset();
 
 private:
-  CFMDownsampleRB m_ringBuffer;
-  union {
-    int32_t m_samplePack;
-    int8_t  m_samplePackBytes[4];
-  };
-  uint8_t m_packIndex;
-  uint8_t m_downSampleIndex;
+  CRingBuffer<TSamplePairPack> m_ringBuffer;
+  uint32_t                     m_samplePack;
+  uint8_t*                     m_samplePackPointer;
+  uint8_t                      m_sampleIndex;
 };
 
 #endif

FMRB.cpp

@@ -1,110 +0,0 @@
-/*
-TX fifo control - Copyright (C) KI6ZUM 2015
-Copyright (C) 2015,2016,2020 by Jonathan Naylor G4KLX
-
-This library is free software; you can redistribute it and/or
-modify it under the terms of the GNU Library General Public
-License as published by the Free Software Foundation; either
-version 2 of the License, or (at your option) any later version.
-
-This library is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-Library General Public License for more details.
-
-You should have received a copy of the GNU Library General Public
-License along with this library; if not, write to the
-Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
-Boston, MA  02110-1301, USA.
-*/
-
-#include "FMRB.h"
-
-CFMRB::CFMRB(uint16_t length) :
-m_length(length),
-m_head(0U),
-m_tail(0U),
-m_full(false),
-m_overflow(false)
-{
-  m_samples = new q15_t[length];
-}
-
-uint16_t CFMRB::getSpace() const
-{
-  uint16_t n = 0U;
-
-  if (m_tail == m_head)
-    n = m_full ? 0U : m_length;
-  else if (m_tail < m_head)
-    n = m_length - m_head + m_tail;
-  else
-    n = m_tail - m_head;
-
-  if (n > m_length)
-    n = 0U;
-
-  return n;
-}
-
-uint16_t CFMRB::getData() const
-{
-  if (m_tail == m_head)
-    return m_full ? m_length : 0U;
-  else if (m_tail < m_head)
-    return m_head - m_tail;
-  else
-    return m_length - m_tail + m_head;
-}
-
-bool CFMRB::put(q15_t sample)
-{
-  if (m_full) {
-    m_overflow = true;
-    return false;
-  }
-
-  m_samples[m_head] = sample;
-
-  m_head++;
-  if (m_head >= m_length)
-    m_head = 0U;
-
-  if (m_head == m_tail)
-    m_full = true;
-
-  return true;
-}
-
-bool CFMRB::get(q15_t& sample)
-{
-  if (m_head == m_tail && !m_full)
-    return false;
-
-  sample = m_samples[m_tail];
-
-  m_full = false;
-
-  m_tail++;
-  if (m_tail >= m_length)
-    m_tail = 0U;
-
-  return true;
-}
-
-bool CFMRB::hasOverflowed()
-{
-  bool overflow = m_overflow;
-
-  m_overflow = false;
-
-  return overflow;
-}
-
-void CFMRB::reset()
-{
-  m_head = 0U;
-  m_tail = 0U;
-  m_full     = false;
-  m_overflow = false;
-}

FMRB.h

@@ -1,72 +0,0 @@
-/*
-Serial fifo control - Copyright (C) KI6ZUM 2015
-Copyright (C) 2015,2016,2020 by Jonathan Naylor G4KLX
-
-This library is free software; you can redistribute it and/or
-modify it under the terms of the GNU Library General Public
-License as published by the Free Software Foundation; either
-version 2 of the License, or (at your option) any later version.
-
-This library is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-Library General Public License for more details.
-
-You should have received a copy of the GNU Library General Public
-License along with this library; if not, write to the
-Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
-Boston, MA  02110-1301, USA.
-*/
-
-#if !defined(FMRB_H)
-#define  FMRB_H
-
-#if defined(STM32F4XX)
-#include "stm32f4xx.h"
-#elif defined(STM32F7XX)
-#include "stm32f7xx.h"
-#elif defined(STM32F105xC)
-#include "stm32f1xx.h"
-#include <cstddef>
-#else
-#include <Arduino.h>
-#endif
-
-#if defined(__SAM3X8E__) || defined(STM32F105xC)
-#define  ARM_MATH_CM3
-#elif defined(STM32F7XX)
-#define  ARM_MATH_CM7
-#elif defined(STM32F4XX) || defined(__MK20DX256__) || defined(__MK64FX512__) || defined(__MK66FX1M0__)
-#define  ARM_MATH_CM4
-#else
-#error "Unknown processor type"
-#endif
-
-#include <arm_math.h>
-
-class CFMRB {
-public:
-  CFMRB(uint16_t length);
-  
-  uint16_t getSpace() const;
-  
-  uint16_t getData() const;
-
-  bool put(q15_t sample);
-
-  bool get(q15_t& sample);
-
-  bool hasOverflowed();
-
-  void reset();
-
-private:
-  uint16_t          m_length;
-  volatile q15_t*   m_samples;
-  volatile uint16_t m_head;
-  volatile uint16_t m_tail;
-  volatile bool     m_full;
-  bool              m_overflow;
-};
-
-#endif

FMSamplePairPack.h

@@ -0,0 +1,29 @@
+/*
+ *   Copyright (C) 2020 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2020 by Geoffrey Merck F4FXL - KC3FRA
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if !defined(TSAMPLEPACK_H)
+#define TSAMPLEPACK_H
+
+struct TSamplePairPack {
+  uint8_t byte0;
+  uint8_t byte1;
+  uint8_t byte2;
+};
+
+#endif

FMUpSampler.cpp

@@ -0,0 +1,97 @@
+/*
+ *   Copyright (C) 2020 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2020 by Geoffrey Merck F4FXL - KC3FRA
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "FMUpSampler.h"
+
+const uint32_t FM_UPSAMPLE_MASK = 0x00000FFFU;
+
+CFMUpSampler::CFMUpSampler() :
+m_upSampleIndex(0),
+m_pack(0U),
+m_packPointer(NULL),
+m_samples(3600U), //300ms of 12 bit 8kHz audio
+m_running(false)
+{
+  m_packPointer = (uint8_t*)&m_pack;
+}
+
+void CFMUpSampler::reset()
+{
+    m_upSampleIndex = 0U;
+    m_pack = 0U;
+    m_samples.reset();
+    m_running = false;
+}
+
+void CFMUpSampler::addData(const uint8_t* data, uint16_t length)
+{
+  TSamplePairPack* packPointer = (TSamplePairPack*)data;
+  TSamplePairPack* packPointerEnd = packPointer + (length / 3U);
+  while(packPointer != packPointerEnd) {
+    m_samples.put(*packPointer);
+    packPointer++;
+  }
+  if(!m_running)
+    m_running = m_samples.getData() > 300U;//75ms of audio
+}
+
+bool CFMUpSampler::getSample(q15_t& sample)
+{
+  if(!m_running)
+    return false;
+
+  switch (m_upSampleIndex)
+  {
+  case 0: {
+    TSamplePairPack pairPack;
+    if(!m_samples.get(pairPack)) {
+      m_running = false;
+      return false;
+    }
+      
+    m_pack = 0U;
+    m_packPointer = (uint8_t*)&m_pack;
+
+    m_packPointer[0U] = pairPack.byte0;
+    m_packPointer[1U] = pairPack.byte1;
+    m_packPointer[2U] = pairPack.byte2;
+
+    sample = q15_t(m_pack >> 12) - 2048;
+    break;
+  }
+  case 3:
+    sample = q15_t(m_pack & FM_UPSAMPLE_MASK) - 2048;
+  break;
+  default:
+    sample = 0;
+  break;
+  }
+
+  m_upSampleIndex++;
+  if(m_upSampleIndex >= 6U)
+    m_upSampleIndex = 0U;
+
+  return true;
+}
+
+uint16_t CFMUpSampler::getSpace() const
+{
+  //return available space in bytes
+  return m_samples.getSpace() * sizeof(TSamplePairPack);
+}

FMUpSampler.h

@@ -0,0 +1,48 @@
+/*
+ *   Copyright (C) 2020 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2020 by Geoffrey Merck F4FXL - KC3FRA
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#if !defined(FMUPSAMPLER_H)
+#define FMUPSAMPLER_H
+
+#include "Config.h"
+#include "RingBuffer.h"
+#include "FMSamplePairPack.h"
+
+class CFMUpSampler {
+public:
+  CFMUpSampler();
+
+  void reset();
+
+  void addData(const uint8_t* data, uint16_t length);
+
+  bool getSample(q15_t& sample);
+
+  uint16_t getSpace() const;
+
+private:
+  uint8_t m_upSampleIndex;
+  uint32_t m_pack;
+  uint8_t * m_packPointer;
+  CRingBuffer<TSamplePairPack> m_samples;
+  bool m_running;
+};
+
+#endif

Globals.h

@@ -28,6 +28,7 @@
 #include "STM32Utils.h"
 #else
 #include <Arduino.h>
+#undef PI //Undefine PI to get rid of annoying warning as it is also defined in arm_math.h.
 #endif
 
 #if defined(__SAM3X8E__) || defined(STM32F105xC)

IO.cpp

@@ -264,6 +264,7 @@ void CIO::process()
   if (m_txBuffer.getData() == 0U && m_tx) {
     m_tx = false;
     setPTTInt(m_pttInvert ? true : false);
+    DEBUG1("TX OFF");
   }
 
   if (m_rxBuffer.getData() >= RX_BLOCK_SIZE) {
@@ -272,15 +273,16 @@ void CIO::process()
     uint16_t rssi[RX_BLOCK_SIZE];
 
     for (uint16_t i = 0U; i < RX_BLOCK_SIZE; i++) {
-      uint16_t sample;
-      m_rxBuffer.get(sample, control[i]);
+      TSample sample;
+      m_rxBuffer.get(sample);
+      control[i] = sample.control;
       m_rssiBuffer.get(rssi[i]);
 
       // Detect ADC overflow
-      if (m_detect && (sample == 0U || sample == 4095U))
+      if (m_detect && (sample.sample == 0U || sample.sample == 4095U))
         m_adcOverflow++;
 
-      q15_t res1 = q15_t(sample) - m_rxDCOffset;
+      q15_t res1 = q15_t(sample.sample) - m_rxDCOffset;
       q31_t res2 = res1 * m_rxLevel;
       samples[i] = q15_t(__SSAT((res2 >> 15), 16));
     }
@@ -452,6 +454,7 @@ void CIO::write(MMDVM_STATE mode, q15_t* samples, uint16_t length, const uint8_t
   if (!m_tx) {
     m_tx = true;
     setPTTInt(m_pttInvert ? false : true);
+    DEBUG1("TX ON");
   }
 
   q15_t txLevel = 0;
@@ -492,9 +495,9 @@ void CIO::write(MMDVM_STATE mode, q15_t* samples, uint16_t length, const uint8_t
       m_dacOverflow++;
 
     if (control == NULL)
-      m_txBuffer.put(res3, MARK_NONE);
+      m_txBuffer.put({res3, MARK_NONE});
     else
-      m_txBuffer.put(res3, control[i]);
+      m_txBuffer.put({res3, control[i]});
   }
 }
 

IO.h

@@ -21,8 +21,12 @@
 
 #include "Globals.h"
 
-#include "SampleRB.h"
-#include "RSSIRB.h"
+#include "RingBuffer.h"
+
+struct TSample {
+  volatile uint16_t sample;
+  volatile uint8_t control;
+};
 
 class CIO {
 public:
@@ -57,11 +61,11 @@ public:
   void selfTest();
 
 private:
-  bool                 m_started;
+  bool                  m_started;
 
-  CSampleRB            m_rxBuffer;
-  CSampleRB            m_txBuffer;
-  CRSSIRB              m_rssiBuffer;
+  CRingBuffer<TSample>  m_rxBuffer;
+  CRingBuffer<TSample>  m_txBuffer;
+  CRingBuffer<uint16_t> m_rssiBuffer;
 
   arm_biquad_casd_df1_inst_q31 m_dcFilter;
   q31_t                        m_dcState[4];

IODue.cpp

@@ -185,14 +185,13 @@ void CIO::startInt()
 void CIO::interrupt()
 {
   if ((ADC->ADC_ISR & ADC_ISR_EOC_Chan) == ADC_ISR_EOC_Chan) {    // Ensure there was an End-of-Conversion and we read the ISR reg
-    uint8_t control = MARK_NONE;
-    uint16_t sample = DC_OFFSET;
+    TSample sample = {DC_OFFSET, MARK_NONE};
 
-    m_txBuffer.get(sample, control);
-    DACC->DACC_CDR = sample;
+    m_txBuffer.get(sample);
+    DACC->DACC_CDR = sample.sample;
 
-    sample = ADC->ADC_CDR[ADC_CDR_Chan];
-    m_rxBuffer.put(sample, control);
+    sample.sample = ADC->ADC_CDR[ADC_CDR_Chan];
+    m_rxBuffer.put(sample);
 
 #if defined(SEND_RSSI_DATA)
     m_rssiBuffer.put(ADC->ADC_CDR[RSSI_CDR_Chan]);

IOSTM.cpp

@@ -326,25 +326,24 @@ void CIO::startInt()
 
 void CIO::interrupt()
 {
-   uint8_t control  = MARK_NONE;
-   uint16_t sample  = DC_OFFSET;
+   TSample sample = {DC_OFFSET, MARK_NONE};
    uint16_t rawRSSI = 0U;
 
-   m_txBuffer.get(sample, control);
+   m_txBuffer.get(sample);
 
    // Send the value to the DAC
 #if defined(STM32F4_NUCLEO) && defined(STM32F4_NUCLEO_ARDUINO_HEADER)
-   DAC_SetChannel2Data(DAC_Align_12b_R, sample);
+   DAC_SetChannel2Data(DAC_Align_12b_R, sample.sample);
 #else
-   DAC_SetChannel1Data(DAC_Align_12b_R, sample);
+   DAC_SetChannel1Data(DAC_Align_12b_R, sample.sample);
 #endif
 
    // Read value from ADC1 and ADC2
    if ((ADC_GetFlagStatus(ADC1, ADC_FLAG_EOC) == RESET)) {
       // shouldn't be still in reset at this point so null the sample value?
-      sample  = 0U;
+      sample.sample  = 0U;
    } else {
-      sample  = ADC_GetConversionValue(ADC1);
+      sample.sample  = ADC_GetConversionValue(ADC1);
 #if defined(SEND_RSSI_DATA)
       rawRSSI = ADC_GetConversionValue(ADC2);
 #endif
@@ -354,7 +353,7 @@ void CIO::interrupt()
    ADC_ClearFlag(ADC1, ADC_FLAG_EOC);
    ADC_SoftwareStartConv(ADC1);
 
-   m_rxBuffer.put(sample, control);
+   m_rxBuffer.put(sample);
    m_rssiBuffer.put(rawRSSI);
 
    m_watchdog++;

IOSTM_CMSIS.cpp

@@ -41,6 +41,7 @@ YSF      PB8    output
 P25      PB9    output
 NXDN     PB10   output
 POCSAG   PB11   output
+FM       PB12   output
 
 RX       PB0    analog input (ADC1_8)
 RSSI     PB1    analog input (ADC2_9)
@@ -84,6 +85,9 @@ USART1_RXD PA10  input (AF)
 #define PIN_POCSAG        11
 #define PORT_POCSAG       GPIOB
 #define BB_POCSAG         *((bitband_t)BITBAND_PERIPH(&PORT_POCSAG->ODR, PIN_POCSAG))
+#define PIN_FM            14
+#define PORT_FM           GPIOB
+#define BB_FM             *((bitband_t)BITBAND_PERIPH(&PORT_FM->ODR, PIN_FM))
 
 #define PIN_RX            0
 #define PIN_RX_ADC_CH     8
@@ -154,16 +158,35 @@ void GPIOConfigPin(GPIO_TypeDef *port_ptr, uint32_t pin, uint32_t mode_cnf_value
 #if defined(STM32F1_POG)
 void FancyLEDEffect()
 {
-  bitband_t foo[] = {&BB_LED, &BB_COSLED, &BB_PTT, &BB_DMR, &BB_DSTAR, &BB_YSF, &BB_P25};
-   
-  for(int i=0; i<7; i++){
-    *foo[i] = 0x01;
+  int ledCount = 10;
+
+  bitband_t foo[] = {&BB_LED, &BB_COSLED, &BB_PTT, &BB_DMR, &BB_DSTAR, &BB_YSF, &BB_P25,
+#if defined(USE_ALTERNATE_NXDN_LEDS)
+	NULL,
+#else
+	&BB_NXDN,
+#endif
+#if defined(USE_ALTERNATE_POCSAG_LEDS)
+	NULL,
+#else
+  	&BB_POCSAG,
+#endif
+#if defined(USE_ALTERNATE_FM_LEDS)
+	NULL};
+#else
+	&BB_FM};
+#endif
+
+  for(int i=0; i<ledCount; i++){
+    if(foo[i] != NULL)
+      *foo[i] = 0x01;
   }
   GPIOConfigPin(PORT_USART1_TXD, PIN_USART1_TXD, GPIO_CRL_MODE0_1);
   *((bitband_t)BITBAND_PERIPH(&PORT_USART1_TXD->ODR, PIN_USART1_TXD)) = 0x00;
   delay(SystemCoreClock/1000*100);
-  for(int i=0; i<7; i++){
-    *foo[i] = 0x00;
+  for(int i=0; i<ledCount; i++){
+    if(foo[i] != NULL)
+      *foo[i] = 0x00;
   }
   *((bitband_t)BITBAND_PERIPH(&PORT_USART1_TXD->ODR, PIN_USART1_TXD)) = 0x01;
   delay(SystemCoreClock/1000*20);
@@ -172,18 +195,22 @@ void FancyLEDEffect()
   *((bitband_t)BITBAND_PERIPH(&PORT_USART1_TXD->ODR, PIN_USART1_TXD)) = 0x01;
   
   *foo[0] = 0x01;
-  for(int i=1; i<7; i++){
+  for(int i=1; i<ledCount; i++){
     delay(SystemCoreClock/1000*10);
-    *foo[i-1] = 0x00;
-    *foo[i] = 0x01;
+    if (foo[i-1] != NULL)
+      *foo[i-1] = 0x00;
+    if (foo[i] != NULL)
+      *foo[i] = 0x01;
   }
-  for(int i=5; i>=0; i--){
+  for(int i=ledCount - 2; i>=0; i--) {
     delay(SystemCoreClock/1000*10);
-    *foo[i+1] = 0x00;
-    *foo[i] = 0x01;
+    if (foo[i+1] != NULL)
+      *foo[i+1] = 0x00;
+    if (foo[i] != NULL)
+      *foo[i] = 0x01;
   }
   delay(SystemCoreClock/1000*10);
-  *foo[5+1-6] = 0x00;
+  *foo[0] = 0x00;
   *((bitband_t)BITBAND_PERIPH(&PORT_USART1_TXD->ODR, PIN_USART1_TXD)) = 0x00;
   delay(SystemCoreClock/1000*10);
   *((bitband_t)BITBAND_PERIPH(&PORT_USART1_TXD->ODR, PIN_USART1_TXD)) = 0x01;
@@ -228,6 +255,9 @@ static inline void GPIOInit()
 #if !defined(USE_ALTERNATE_POCSAG_LEDS)
   GPIOConfigPin(PORT_POCSAG, PIN_POCSAG, GPIO_CRL_MODE0_1);
 #endif
+#if !defined(USE_ALTERNATE_FM_LEDS)
+  GPIOConfigPin(PORT_FM,     PIN_FM,     GPIO_CRL_MODE0_1);
+#endif
 
   GPIOConfigPin(PORT_RX, PIN_RX, 0);
 #if defined(SEND_RSSI_DATA)
@@ -367,8 +397,7 @@ void CIO::startInt()
 
 void CIO::interrupt()
 {
-  uint8_t control  = MARK_NONE;
-  uint16_t sample  = DC_OFFSET;
+  TSample sample = {DC_OFFSET, MARK_NONE};
 #if defined(SEND_RSSI_DATA)
   uint16_t rawRSSI = 0U;
 #endif
@@ -385,12 +414,12 @@ void CIO::interrupt()
     *rssi_adon = 1;
 #endif
     
-    m_txBuffer.get(sample, control);
-    DAC->DHR12R1 = sample;  // Send the value to the DAC
+    m_txBuffer.get(sample);
+    DAC->DHR12R1 = sample.sample;  // Send the value to the DAC
 
     // Read value from ADC1 and ADC2
-    sample  = ADC1->DR;   // read conversion result; EOC is cleared by this read
-    m_rxBuffer.put(sample, control);
+    sample.sample  = ADC1->DR;   // read conversion result; EOC is cleared by this read
+    m_rxBuffer.put(sample);
 #if defined(SEND_RSSI_DATA)
     rawRSSI = ADC2->DR;
     m_rssiBuffer.put(rawRSSI);
@@ -465,6 +494,8 @@ void CIO::setFMInt(bool on)
 #if defined(USE_ALTERNATE_FM_LEDS)
   BB_DSTAR = !!on;
   BB_YSF   = !!on;
+#else
+  BB_FM = !!on;
 #endif
 }
 

IOTeensy.cpp

@@ -161,15 +161,14 @@ void CIO::startInt()
 
 void CIO::interrupt()
 {
-  uint8_t control = MARK_NONE;
-  uint16_t sample = DC_OFFSET;
+   TSample sample = {DC_OFFSET, MARK_NONE};
 
-  m_txBuffer.get(sample, control);
-  *(int16_t *)&(DAC0_DAT0L) = sample;
+  m_txBuffer.get(sample);
+  *(int16_t *)&(DAC0_DAT0L) = sample.sample;
 
   if ((ADC0_SC1A & ADC_SC1_COCO) == ADC_SC1_COCO) {
-    sample = ADC0_RA;
-    m_rxBuffer.put(sample, control);
+    sample.sample = ADC0_RA;
+    m_rxBuffer.put(sample);
   }
     
 #if defined(SEND_RSSI_DATA)

Makefile

@@ -155,7 +155,7 @@ LDFLAGS_F722 =-T stm32f722_link.ld $(MCFLAGS_F7) --specs=nosys.specs $(INCLUDES_
 # Common flags
 CFLAGS=-Os -ffunction-sections -fdata-sections -fno-builtin -Wno-implicit -DCUSTOM_NEW -DNO_EXCEPTIONS
 CXXFLAGS=-Os -fno-exceptions -ffunction-sections -fdata-sections -fno-builtin -fno-rtti -DCUSTOM_NEW -DNO_EXCEPTIONS
-LDFLAGS=-Os --specs=nano.specs -Wl,-Map=bin/mmdvm.map
+LDFLAGS=-Os --specs=nano.specs
 
 # Build Rules
 .PHONY: all release dis pi pi-f722 f4m nucleo f767 dvm drcc_nqf clean

Makefile.Arduino

@@ -1,5 +1,5 @@
 #!/usr/bin/make
-# makefile for the arduino due (works with arduino IDE 1.6.11)
+# makefile for the arduino due (works with arduino IDE 1.6.12)
 #
 # The original file can be found at https://github.com/pauldreik/arduino-due-makefile
 #
@@ -34,7 +34,7 @@ OBJCOPY:=$(ADIR)/packages/arduino/tools/arm-none-eabi-gcc/4.8.3-2014q1/bin/arm-n
 
 C:=$(CC)
 #SAM:=arduino/sam/
-SAM:=$(ADIR)/packages/arduino/hardware/sam/1.6.11
+SAM:=$(ADIR)/packages/arduino/hardware/sam/1.6.12
 #CMSIS:=arduino/sam/system/CMSIS/
 #LIBSAM:=arduino/sam/system/libsam
 TMPDIR:=$(PWD)/build

NXDNTX.cpp

@@ -81,7 +81,8 @@ void CNXDNTX::process()
       m_poBuffer[m_poLen++] = NXDN_PREAMBLE[2U];
     } else {
       for (uint8_t i = 0U; i < NXDN_FRAME_LENGTH_BYTES; i++) {
-        uint8_t c = m_buffer.get();
+        uint8_t c = 0U;
+        m_buffer.get(c);
         m_poBuffer[m_poLen++] = c;
       }
     }

NXDNTX.h

@@ -21,7 +21,7 @@
 
 #include "Config.h"
 
-#include "SerialRB.h"
+#include "RingBuffer.h"
 
 class CNXDNTX {
 public:
@@ -38,7 +38,7 @@ public:
   void setParams(uint8_t txHang);
 
 private:
-  CSerialRB                        m_buffer;
+  CRingBuffer<uint8_t>                        m_buffer;
   arm_fir_interpolate_instance_q15 m_modFilter;
   arm_fir_instance_q15             m_sincFilter;
   q15_t                            m_modState[16U];    // blockSize + phaseLength - 1, 4 + 9 - 1 plus some spare

P25TX.cpp

@@ -75,9 +75,11 @@ void CP25TX::process()
       for (uint16_t i = 0U; i < m_txDelay; i++)
         m_poBuffer[m_poLen++] = P25_START_SYNC;
     } else {
-      uint8_t length = m_buffer.get();
+      uint8_t length;
+      m_buffer.get(length);
       for (uint8_t i = 0U; i < length; i++) {
-        uint8_t c = m_buffer.get();
+        uint8_t c = 0U;
+        m_buffer.get(c);
         m_poBuffer[m_poLen++] = c;
       }
     }

P25TX.h

@@ -21,7 +21,7 @@
 
 #include "Config.h"
 
-#include "SerialRB.h"
+#include "RingBuffer.h"
 
 class CP25TX {
 public:
@@ -38,7 +38,7 @@ public:
   void setParams(uint8_t txHang);
 
 private:
-  CSerialRB                        m_buffer;
+  CRingBuffer<uint8_t>                        m_buffer;
   arm_fir_interpolate_instance_q15 m_modFilter;
   arm_fir_instance_q15             m_lpFilter;
   q15_t                            m_modState[16U];    // blockSize + phaseLength - 1, 4 + 9 - 1 plus some spare

POCSAGTX.cpp

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2009-2018 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2009-2018,2020 by Jonathan Naylor G4KLX
  *
  *   This program is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by
@@ -61,7 +61,8 @@ void CPOCSAGTX::process()
         m_poBuffer[m_poLen++] = POCSAG_SYNC;
     } else {
       for (uint8_t i = 0U; i < POCSAG_FRAME_LENGTH_BYTES; i++) {
-        uint8_t c = m_buffer.get();
+        uint8_t c = 0U;
+        m_buffer.get(c);
         m_poBuffer[m_poLen++] = c;
       }
     }
@@ -146,4 +147,3 @@ uint8_t CPOCSAGTX::getSpace() const
 {
   return m_buffer.getSpace() / POCSAG_FRAME_LENGTH_BYTES;
 }
-

POCSAGTX.h

@@ -21,7 +21,7 @@
 
 #include "Config.h"
 
-#include "SerialRB.h"
+#include "RingBuffer.h"
 
 class CPOCSAGTX {
 public:
@@ -40,7 +40,7 @@ public:
   bool busy();
 
 private:
-  CSerialRB            m_buffer;
+  CRingBuffer<uint8_t>            m_buffer;
   arm_fir_instance_q15 m_modFilter;
   q15_t                m_modState[170U];     // NoTaps + BlockSize - 1, 6 + 160 - 1 plus some spare
   uint8_t              m_poBuffer[200U];

README.md

@@ -1,17 +1,7 @@
-This is the source code of the MMDVM firmware that supports D-Star, DMR,
-System Fusion, P25, NXDN, POCSAG, and FM modes.
+This is the source code of the MMDVM firmware that supports D-Star, DMR, System Fusion, P25, NXDN, and POCSAG modes.
 
-It runs on the Arduino Due, the ST-Micro STM32F1xxx, STM32F4xxx and STM32F7xxx
-processors, as well as the Teensy 3.1/3.2/3.5/3.6. What these platforms have in
-common is the use of an ARM Cortex-M3, M4, or M7 processors with a clock speed
-greater than 70 MHz, and access to at least one analogue to digital converter
-and one digital to analogue converter.
+It runs on the Arduino Due, the ST-Micro STM32F1xxx, STM32F4xxx and STM32F7xxx processors, as well as the Teensy 3.1/3.2/3.5/3.6. What these platforms have in common is the use of an ARM Cortex-M3 or M4 processor with a clock speed greater than 70 MHz, and access to at least one analogue to digital converter and one digital to analogue converter.
 
-In order to build this software for the Arduino Due, you will need to edit a
-file within the Arduino GUI and that is detailed in the BUILD.txt file. The
-STM32 support is being supplied via the ARM GCC compiler. The Teensy support
-uses Teensyduino.
+In order to build this software for the Arduino Due, you will need to edit a file within the Arduino GUI and that is detailed in the BUILD.txt file. The STM32 support is being supplied via the Coocox IDE with ARM GCC. The Teensy support uses Teensyduino.
 
-This software is licenced under the GPL v2 and is intended for amateur and
-educational use only. Use of this software for commercial purposes is strictly
-forbidden.
+This software is licenced under the GPL v2 and is intended for amateur and educational use only. Use of this software for commercial purposes is strictly forbidden.

RSSIRB.cpp

@@ -1,102 +0,0 @@
-/*
-TX fifo control - Copyright (C) KI6ZUM 2015
-Copyright (C) 2015,2016 by Jonathan Naylor G4KLX
-
-This library is free software; you can redistribute it and/or
-modify it under the terms of the GNU Library General Public
-License as published by the Free Software Foundation; either
-version 2 of the License, or (at your option) any later version.
-
-This library is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-Library General Public License for more details.
-
-You should have received a copy of the GNU Library General Public
-License along with this library; if not, write to the
-Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
-Boston, MA  02110-1301, USA.
-*/
-
-#include "RSSIRB.h"
-
-CRSSIRB::CRSSIRB(uint16_t length) :
-m_length(length),
-m_head(0U),
-m_tail(0U),
-m_full(false),
-m_overflow(false)
-{
-  m_rssi = new uint16_t[length];
-}
-
-uint16_t CRSSIRB::getSpace() const
-{
-  uint16_t n = 0U;
-
-  if (m_tail == m_head)
-    n = m_full ? 0U : m_length;
-  else if (m_tail < m_head)
-    n = m_length - m_head + m_tail;
-  else
-    n = m_tail - m_head;
-
-  if (n > m_length)
-    n = 0U;
-
-  return n;
-}
-
-uint16_t CRSSIRB::getData() const
-{
-  if (m_tail == m_head)
-    return m_full ? m_length : 0U;
-  else if (m_tail < m_head)
-    return m_head - m_tail;
-  else
-    return m_length - m_tail + m_head;
-}
-
-bool CRSSIRB::put(uint16_t rssi)
-{
-  if (m_full) {
-    m_overflow = true;
-    return false;
-  }
-
-  m_rssi[m_head] = rssi;
-
-  m_head++;
-  if (m_head >= m_length)
-    m_head = 0U;
-
-  if (m_head == m_tail)
-    m_full = true;
-
-  return true;
-}
-
-bool CRSSIRB::get(uint16_t& rssi)
-{
-  if (m_head == m_tail && !m_full)
-    return false;
-
-  rssi  = m_rssi[m_tail];
-
-  m_full = false;
-
-  m_tail++;
-  if (m_tail >= m_length)
-    m_tail = 0U;
-
-  return true;
-}
-
-bool CRSSIRB::hasOverflowed()
-{
-  bool overflow = m_overflow;
-
-  m_overflow = false;
-
-  return overflow;
-}

RSSIRB.h

@@ -1,59 +0,0 @@
-/*
-Serial fifo control - Copyright (C) KI6ZUM 2015
-Copyright (C) 2015,2016 by Jonathan Naylor G4KLX
-
-This library is free software; you can redistribute it and/or
-modify it under the terms of the GNU Library General Public
-License as published by the Free Software Foundation; either
-version 2 of the License, or (at your option) any later version.
-
-This library is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-Library General Public License for more details.
-
-You should have received a copy of the GNU Library General Public
-License along with this library; if not, write to the
-Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
-Boston, MA  02110-1301, USA.
-*/
-
-#if !defined(RSSIRB_H)
-#define  RSSIRB_H
-
-#if defined(STM32F4XX)
-#include "stm32f4xx.h"
-#elif defined(STM32F7XX)
-#include "stm32f7xx.h"
-#elif defined(STM32F105xC)
-#include "stm32f1xx.h"
-#include <cstddef>
-#else
-#include <Arduino.h>
-#endif
-
-class CRSSIRB {
-public:
-  CRSSIRB(uint16_t length);
-  
-  uint16_t getSpace() const;
-  
-  uint16_t getData() const;
-
-  bool put(uint16_t rssi);
-
-  bool get(uint16_t& rssi);
-
-  bool hasOverflowed();
-
-private:
-  uint16_t           m_length;
-  volatile uint16_t* m_rssi;
-  volatile uint16_t  m_head;
-  volatile uint16_t  m_tail;
-  volatile bool      m_full;
-  bool               m_overflow;
-};
-
-#endif
-

RingBuffer.h

@@ -1,5 +1,6 @@
 /*
  *   Copyright (C) 2020 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2020 by Geoffrey Merck F4FXL - KC3FRA
  *
  *   This program is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by
@@ -16,8 +17,8 @@
  *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#if !defined(FMDOWNSAMPLERB_H)
-#define  FMDOWNSAMPLERB_H
+#if !defined(RINGBUFFER_H)
+#define  RINGBUFFER_H
 
 #if defined(STM32F4XX)
 #include "stm32f4xx.h"
@@ -28,6 +29,7 @@
 #include <cstddef>
 #else
 #include <Arduino.h>
+#undef PI
 #endif
 
 #if defined(__SAM3X8E__) || defined(STM32F105xC)
@@ -42,27 +44,34 @@
 
 #include <arm_math.h>
 
-class CFMDownsampleRB {
+template <typename TDATATYPE>
+class CRingBuffer {
 public:
-  CFMDownsampleRB(uint16_t length);
+  CRingBuffer(uint16_t length = 370U);
   
   uint16_t getSpace() const;
   
   uint16_t getData() const;
 
-  bool put(uint8_t sample);
+  bool put(TDATATYPE item) volatile;
 
-  bool get(uint8_t& sample);
+  bool get(TDATATYPE& item) volatile;
+
+  TDATATYPE peek() const;
 
   bool hasOverflowed();
 
+  void reset();
+
 private:
-  uint16_t          m_length;
-  volatile uint8_t* m_samples;
-  volatile uint16_t m_head;
-  volatile uint16_t m_tail;
-  volatile bool     m_full;
-  bool              m_overflow;
+  uint16_t              m_length;
+  TDATATYPE*            m_buffer;
+  volatile uint16_t     m_head;
+  volatile uint16_t     m_tail;
+  volatile bool         m_full;
+  bool                  m_overflow;
 };
 
-#endif
+#include "RingBuffer.impl.h"
+
+#endif

RingBuffer.impl.h

@@ -1,5 +1,6 @@
 /*
  *   Copyright (C) 2020 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2020 by Geoffrey Merck F4FXL - KC3FRA
  *
  *   This program is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by
@@ -16,20 +17,19 @@
  *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include "RingBuffer.h"
 
-#include "FMDownsampleRB.h"
-
-CFMDownsampleRB::CFMDownsampleRB(uint16_t length) :
+template <typename TDATATYPE> CRingBuffer<TDATATYPE>::CRingBuffer(uint16_t length) :
 m_length(length),
 m_head(0U),
 m_tail(0U),
 m_full(false),
 m_overflow(false)
 {
-  m_samples = new uint8_t[length];
+  m_buffer = new TDATATYPE[length];
 }
 
-uint16_t CFMDownsampleRB::getSpace() const
+template <typename TDATATYPE> uint16_t CRingBuffer<TDATATYPE>::getSpace() const
 {
   uint16_t n = 0U;
 
@@ -46,7 +46,7 @@ uint16_t CFMDownsampleRB::getSpace() const
   return n;
 }
 
-uint16_t CFMDownsampleRB::getData() const
+template <typename TDATATYPE> uint16_t CRingBuffer<TDATATYPE>::getData() const
 {
   if (m_tail == m_head)
     return m_full ? m_length : 0U;
@@ -56,14 +56,14 @@ uint16_t CFMDownsampleRB::getData() const
     return m_length - m_tail + m_head;
 }
 
-bool CFMDownsampleRB::put(uint8_t sample)
+template <typename TDATATYPE> bool CRingBuffer<TDATATYPE>::put(TDATATYPE item) volatile
 {
   if (m_full) {
     m_overflow = true;
     return false;
   }
 
-  m_samples[m_head] = sample;
+  m_buffer[m_head] = item;
 
   m_head++;
   if (m_head >= m_length)
@@ -75,12 +75,17 @@ bool CFMDownsampleRB::put(uint8_t sample)
   return true;
 }
 
-bool CFMDownsampleRB::get(uint8_t& sample)
+template <typename TDATATYPE> TDATATYPE CRingBuffer<TDATATYPE>::peek() const
+{
+  return m_buffer[m_tail];
+}
+
+template <typename TDATATYPE> bool CRingBuffer<TDATATYPE>::get(TDATATYPE& item) volatile
 {
   if (m_head == m_tail && !m_full)
     return false;
 
-  sample = m_samples[m_tail];
+  item = m_buffer[m_tail];
 
   m_full = false;
 
@@ -91,7 +96,7 @@ bool CFMDownsampleRB::get(uint8_t& sample)
   return true;
 }
 
-bool CFMDownsampleRB::hasOverflowed()
+template <typename TDATATYPE> bool CRingBuffer<TDATATYPE>::hasOverflowed()
 {
   bool overflow = m_overflow;
 
@@ -99,3 +104,11 @@ bool CFMDownsampleRB::hasOverflowed()
 
   return overflow;
 }
+
+template <typename TDATATYPE> void CRingBuffer<TDATATYPE>::reset()
+{
+  m_head = 0U;
+  m_tail = 0U;
+  m_full     = false;
+  m_overflow = false;
+}

STMUART.cpp

@@ -0,0 +1,100 @@
+/*
+ *   Copyright (c) 2020 by Jonathan Naylor G4KLX
+ *   Copyright (c) 2020 by Geoffrey Merck F4FXL - KC3FRA   
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if defined(STM32F4XX) || defined(STM32F7XX)
+
+#include "STMUART.h"
+
+CSTMUART::CSTMUART() :
+m_usart(NULL)
+{
+
+}
+
+void CSTMUART::init(USART_TypeDef* usart)
+{
+  m_usart = usart;
+}
+
+void CSTMUART::write(const uint8_t * data, uint16_t length)
+{
+  if(length == 0U || m_usart == NULL)
+    return;
+
+
+  m_txFifo.put(data[0]);
+  USART_ITConfig(m_usart, USART_IT_TXE, ENABLE);//switch TX IRQ is on
+
+  for(uint16_t i = 1U; i < length; i++) {
+    m_txFifo.put(data[i]);
+  }
+
+  USART_ITConfig(m_usart, USART_IT_TXE, ENABLE);//make sure TX IRQ is on
+}
+
+uint8_t CSTMUART::read()
+{
+  return m_rxFifo.get();
+}
+
+void CSTMUART::handleIRQ()
+{
+  if(m_usart == NULL)
+    return;
+
+  if (USART_GetITStatus(m_usart, USART_IT_RXNE)) {
+    if(!m_rxFifo.isFull())
+      m_rxFifo.put((uint8_t) USART_ReceiveData(m_usart));
+    USART_ClearITPendingBit(USART1, USART_IT_RXNE);
+  }
+
+  if (USART_GetITStatus(m_usart, USART_IT_TXE)) {
+    if(!m_txFifo.isEmpty())
+      USART_SendData(m_usart, m_txFifo.get());
+
+    USART_ClearITPendingBit(m_usart, USART_IT_TXE);
+
+    if (m_txFifo.isEmpty()) // if there's no more data to transmit then turn off TX interrupts
+      USART_ITConfig(m_usart, USART_IT_TXE, DISABLE);
+  }
+}
+
+  // Flushes the transmit shift register
+// warning: this call is blocking
+void CSTMUART::flush()
+{
+  if(m_usart == NULL)
+    return;
+
+   // wait until the TXE shows the shift register is empty
+   while (USART_GetITStatus(m_usart, USART_FLAG_TXE))
+      ;
+}
+
+uint16_t CSTMUART::available()
+{
+  return m_rxFifo.isEmpty() ? 0U : 1U;
+}
+
+uint16_t CSTMUART::availableForWrite()
+{
+  return m_txFifo.isFull() ? 0U : 1U;
+}
+
+#endif

STMUART.h

@@ -0,0 +1,91 @@
+/*
+ *   Copyright (c) 2020 by Jonathan Naylor G4KLX
+ *   Copyright (c) 2020 by Geoffrey Merck F4FXL - KC3FRA   
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if defined(STM32F4XX) || defined(STM32F7XX)
+#if !defined(STMUART_H)
+#define STMUART_H
+
+#if defined(STM32F4XX)
+#include "stm32f4xx.h"
+#elif defined(STM32F7XX)
+#include "stm32f7xx.h"
+#endif
+
+const uint16_t BUFFER_SIZE = 2048U; //needs to be a power of 2 !
+const uint16_t BUFFER_MASK = BUFFER_SIZE - 1;
+
+class CSTMUARTFIFO {
+public:
+  CSTMUARTFIFO() :
+  m_head(0U),
+  m_tail(0U)
+  {
+  }
+
+  void put(uint8_t data)
+  {
+    m_buffer[BUFFER_MASK & (m_head++)] = data;
+  }
+
+  uint8_t get()
+  {
+    return m_buffer[BUFFER_MASK & (m_tail++)];
+  }
+
+  void reset()
+  {
+    m_tail = 0U;
+    m_head = 0U;
+  }
+
+  bool isEmpty()
+  {
+    return m_tail == m_head;
+  }
+
+  bool isFull()
+  {
+    return ((m_head + 1U) & BUFFER_MASK) == (m_tail & BUFFER_MASK);
+  }
+
+private:
+  volatile uint8_t  m_buffer[BUFFER_SIZE];
+  volatile uint16_t m_head;
+  volatile uint16_t m_tail;
+};
+
+class CSTMUART {
+public:
+  CSTMUART();
+  void init(USART_TypeDef* usart);
+  void write(const uint8_t * data, uint16_t length);
+  uint8_t read();
+  void handleIRQ();
+  void flush();
+  uint16_t available();
+  uint16_t availableForWrite();
+
+private:
+  USART_TypeDef * m_usart;
+  CSTMUARTFIFO    m_rxFifo;
+  CSTMUARTFIFO    m_txFifo;
+};
+
+#endif
+#endif

SampleRB.cpp

@@ -1,106 +0,0 @@
-/*
-TX fifo control - Copyright (C) KI6ZUM 2015
-Copyright (C) 2015,2016 by Jonathan Naylor G4KLX
-
-This library is free software; you can redistribute it and/or
-modify it under the terms of the GNU Library General Public
-License as published by the Free Software Foundation; either
-version 2 of the License, or (at your option) any later version.
-
-This library is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-Library General Public License for more details.
-
-You should have received a copy of the GNU Library General Public
-License along with this library; if not, write to the
-Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
-Boston, MA  02110-1301, USA.
-*/
-
-#include "SampleRB.h"
-
-CSampleRB::CSampleRB(uint16_t length) :
-m_length(length),
-m_head(0U),
-m_tail(0U),
-m_full(false),
-m_overflow(false)
-{
-  m_samples = new uint16_t[length];
-  m_control = new uint8_t[length];
-}
-
-uint16_t CSampleRB::getSpace() const
-{
-  uint16_t n = 0U;
-
-  if (m_tail == m_head)
-    n = m_full ? 0U : m_length;
-  else if (m_tail < m_head)
-    n = m_length - m_head + m_tail;
-  else
-    n = m_tail - m_head;
-
-  if (n > m_length)
-    n = 0U;
-
-  return n;
-}
-
-uint16_t CSampleRB::getData() const
-{
-  if (m_tail == m_head)
-    return m_full ? m_length : 0U;
-  else if (m_tail < m_head)
-    return m_head - m_tail;
-  else
-    return m_length - m_tail + m_head;
-}
-
-bool CSampleRB::put(uint16_t sample, uint8_t control)
-{
-  if (m_full) {
-    m_overflow = true;
-    return false;
-  }
-
-  m_samples[m_head] = sample;
-  m_control[m_head] = control;
-
-  m_head++;
-  if (m_head >= m_length)
-    m_head = 0U;
-
-  if (m_head == m_tail)
-    m_full = true;
-
-  return true;
-}
-
-bool CSampleRB::get(uint16_t& sample, uint8_t& control)
-{
-  if (m_head == m_tail && !m_full)
-    return false;
-
-  sample  = m_samples[m_tail];
-  control = m_control[m_tail];
-
-  m_full = false;
-
-  m_tail++;
-  if (m_tail >= m_length)
-    m_tail = 0U;
-
-  return true;
-}
-
-bool CSampleRB::hasOverflowed()
-{
-  bool overflow = m_overflow;
-
-  m_overflow = false;
-
-  return overflow;
-}
-

SampleRB.h

@@ -1,60 +0,0 @@
-/*
-Serial fifo control - Copyright (C) KI6ZUM 2015
-Copyright (C) 2015,2016 by Jonathan Naylor G4KLX
-
-This library is free software; you can redistribute it and/or
-modify it under the terms of the GNU Library General Public
-License as published by the Free Software Foundation; either
-version 2 of the License, or (at your option) any later version.
-
-This library is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-Library General Public License for more details.
-
-You should have received a copy of the GNU Library General Public
-License along with this library; if not, write to the
-Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
-Boston, MA  02110-1301, USA.
-*/
-
-#if !defined(SAMPLERB_H)
-#define  SAMPLERB_H
-
-#if defined(STM32F4XX)
-#include "stm32f4xx.h"
-#elif defined(STM32F7XX)
-#include "stm32f7xx.h"
-#elif defined(STM32F105xC)
-#include "stm32f1xx.h"
-#include <cstddef>
-#else
-#include <Arduino.h>
-#endif
-
-class CSampleRB {
-public:
-  CSampleRB(uint16_t length);
-  
-  uint16_t getSpace() const;
-  
-  uint16_t getData() const;
-
-  bool put(uint16_t sample, uint8_t control);
-
-  bool get(uint16_t& sample, uint8_t& control);
-
-  bool hasOverflowed();
-
-private:
-  uint16_t           m_length;
-  volatile uint16_t* m_samples;
-  volatile uint8_t*  m_control;
-  volatile uint16_t  m_head;
-  volatile uint16_t  m_tail;
-  volatile bool      m_full;
-  bool               m_overflow;
-};
-
-#endif
-

SerialPort.cpp

@@ -68,6 +68,10 @@ const uint8_t MMDVM_POCSAG_DATA  = 0x50U;
 const uint8_t MMDVM_FM_PARAMS1   = 0x60U;
 const uint8_t MMDVM_FM_PARAMS2   = 0x61U;
 const uint8_t MMDVM_FM_PARAMS3   = 0x62U;
+const uint8_t MMDVM_FM_PARAMS4   = 0x63U;
+const uint8_t MMDVM_FM_DATA      = 0x65U;
+const uint8_t MMDVM_FM_STATUS    = 0x66U;
+const uint8_t MMDVM_FM_EOT       = 0x67U;
 
 const uint8_t MMDVM_ACK          = 0x70U;
 const uint8_t MMDVM_NAK          = 0x7FU;
@@ -158,7 +162,7 @@ void CSerialPort::getStatus()
 
   // Send all sorts of interesting internal values
   reply[0U]  = MMDVM_FRAME_START;
-  reply[1U]  = 13U;
+  reply[1U]  = 14U;
   reply[2U]  = MMDVM_GET_STATUS;
 
   reply[3U]  = 0x00U;
@@ -240,7 +244,12 @@ void CSerialPort::getStatus()
   else
     reply[12U] = 0U;
 
-  writeInt(1U, reply, 13);
+  if (m_fmEnable)
+    reply[13U] = fm.getSpace();
+  else
+    reply[13U] = 0U;
+
+  writeInt(1U, reply, 14);
 }
 
 void CSerialPort::getVersion()
@@ -442,6 +451,25 @@ uint8_t CSerialPort::setFMParams3(const uint8_t* data, uint8_t length)
   return fm.setMisc(timeout, timeoutLevel, ctcssFrequency, ctcssHighThreshold, ctcssLowThreshold, ctcssLevel, kerchunkTime, kerchunkTX, hangTime, useCOS, cosInvert, rfAudioBoost, maxDev, rxLevel);
 }
 
+uint8_t CSerialPort::setFMParams4(const uint8_t* data, uint8_t length)
+{
+  if (length < 4U)
+    return 4U;
+
+  uint8_t  audioBoost = data[0U];
+  uint8_t  speed      = data[1U];
+  uint16_t frequency  = data[2U] * 10U;
+  uint8_t  level      = data[3U];
+
+  char ack[50U];
+  uint8_t n = 0U;
+  for (uint8_t i = 4U; i < length; i++, n++)
+    ack[n] = data[i];
+  ack[n] = '\0';
+
+  return fm.setExt(ack, audioBoost, speed, frequency, level);
+}
+
 uint8_t CSerialPort::setMode(const uint8_t* data, uint8_t length)
 {
   if (length < 1U)
@@ -575,7 +603,7 @@ void CSerialPort::setMode(MMDVM_STATE modemState)
 
 void CSerialPort::start()
 {
-  beginInt(1U, 115200);
+  beginInt(1U, SERIAL_SPEED);
 
 #if defined(SERIAL_REPEATER)
   beginInt(3U, 9600);
@@ -670,6 +698,16 @@ void CSerialPort::process()
             }
             break;
 
+          case MMDVM_FM_PARAMS4:
+            err = setFMParams4(m_buffer + 3U, m_len - 3U);
+            if (err == 0U) {
+              sendACK();
+            } else {
+              DEBUG2("Received invalid FM params 4", err);
+              sendNAK(err);
+            }
+            break;
+
           case MMDVM_CAL_DATA:
             if (m_modemState == STATE_DSTARCAL)
               err = calDStarTX.write(m_buffer + 3U, m_len - 3U);
@@ -886,6 +924,20 @@ void CSerialPort::process()
             }
             break;
 
+          case MMDVM_FM_DATA:
+            if (m_fmEnable) {
+              if (m_modemState == STATE_IDLE || m_modemState == STATE_FM)
+                err = fm.writeData(m_buffer + 3U, m_len - 3U);
+            }
+            if (err == 0U) {
+              if (m_modemState == STATE_IDLE)
+                setMode(STATE_FM);
+            } else {
+              DEBUG2("Received invalid FM data", err);
+              sendNAK(err);
+            }
+            break;
+
           case MMDVM_TRANSPARENT:
           case MMDVM_QSO_INFO:
             // Do nothing on the MMDVM.
@@ -1198,6 +1250,64 @@ void CSerialPort::writeNXDNLost()
   writeInt(1U, reply, 3);
 }
 
+void CSerialPort::writeFMData(const uint8_t* data, uint8_t length)
+{
+  if (m_modemState != STATE_FM && m_modemState != STATE_IDLE)
+    return;
+
+  if (!m_fmEnable)
+    return;
+
+  uint8_t reply[255U];
+
+  reply[0U] = MMDVM_FRAME_START;
+  reply[1U] = 0U;
+  reply[2U] = MMDVM_FM_DATA;
+
+  uint8_t count = 3U;
+  for (uint8_t i = 0U; i < length; i++, count++)
+    reply[count] = data[i];
+
+  reply[1U] = count;
+
+  writeInt(1U, reply, count);
+}
+
+void CSerialPort::writeFMStatus(uint8_t status)
+{
+  if (m_modemState != STATE_FM && m_modemState != STATE_IDLE)
+    return;
+
+  if (!m_fmEnable)
+    return;
+
+  uint8_t reply[10U];
+
+  reply[0U] = MMDVM_FRAME_START;
+  reply[1U] = 4U;
+  reply[2U] = MMDVM_FM_STATUS;
+  reply[3U] = status;
+
+  writeInt(1U, reply, 4U);
+}
+
+void CSerialPort::writeFMEOT()
+{
+  if (m_modemState != STATE_FM && m_modemState != STATE_IDLE)
+    return;
+
+  if (!m_fmEnable)
+    return;
+
+  uint8_t reply[10U];
+
+  reply[0U] = MMDVM_FRAME_START;
+  reply[1U] = 3U;
+  reply[2U] = MMDVM_FM_EOT;
+
+  writeInt(1U, reply, 3U);
+}
+
 void CSerialPort::writeCalData(const uint8_t* data, uint8_t length)
 {
   if (m_modemState != STATE_DSTARCAL)

SerialPort.h

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2015,2016,2017,2018 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2015,2016,2017,2018,2020 by Jonathan Naylor G4KLX
  *
  *   This program is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by
@@ -21,7 +21,11 @@
 
 #include "Config.h"
 #include "Globals.h"
-#include "SerialRB.h"
+#include "RingBuffer.h"
+
+#if !defined(SERIAL_SPEED)
+#define SERIAL_SPEED 115200
+#endif
 
 
 class CSerialPort {
@@ -50,6 +54,10 @@ public:
   void writeNXDNData(const uint8_t* data, uint8_t length);
   void writeNXDNLost();
 
+  void writeFMData(const uint8_t* data, uint8_t length);
+  void writeFMStatus(uint8_t status);
+  void writeFMEOT();
+
   void writeCalData(const uint8_t* data, uint8_t length);
   void writeRSSIData(const uint8_t* data, uint8_t length);
 
@@ -64,7 +72,7 @@ private:
   uint8_t   m_ptr;
   uint8_t   m_len;
   bool      m_debug;
-  CSerialRB m_repeat;
+  CRingBuffer<uint8_t> m_repeat;
 
   void    sendACK();
   void    sendNAK(uint8_t err);
@@ -76,6 +84,7 @@ private:
   uint8_t setFMParams1(const uint8_t* data, uint8_t length);
   uint8_t setFMParams2(const uint8_t* data, uint8_t length);
   uint8_t setFMParams3(const uint8_t* data, uint8_t length);
+  uint8_t setFMParams4(const uint8_t* data, uint8_t length);
 
   // Hardware versions
   void    beginInt(uint8_t n, int speed);

SerialRB.cpp

@@ -1,100 +0,0 @@
-/*
-Serial RB control - Copyright (C) KI6ZUM 2015
-Copyright (C) 2015,2016 by Jonathan Naylor G4KLX
-
-This library is free software; you can redistribute it and/or
-modify it under the terms of the GNU Library General Public
-License as published by the Free Software Foundation; either
-version 2 of the License, or (at your option) any later version.
-
-This library is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-Library General Public License for more details.
-
-You should have received a copy of the GNU Library General Public
-License along with this library; if not, write to the
-Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
-Boston, MA  02110-1301, USA.
-*/
-
-#include "SerialRB.h"
-
-CSerialRB::CSerialRB(uint16_t length) :
-m_length(length),
-m_head(0U),
-m_tail(0U),
-m_full(false)
-{
-  m_buffer = new uint8_t[length];
-}
-
-void CSerialRB::reset()
-{
-  m_head = 0U;
-  m_tail = 0U;
-  m_full = false;
-}
-
-uint16_t CSerialRB::getSpace() const
-{
-  uint16_t n = 0U;
-
-  if (m_tail == m_head)
-    n = m_full ? 0U : m_length;
-  else if (m_tail < m_head)
-    n = m_length - m_head + m_tail;
-  else
-    n = m_tail - m_head;
-
-  if (n > m_length)
-    n = 0U;
-
-  return n;
-}
-
-uint16_t CSerialRB::getData() const
-{
-  if (m_tail == m_head)
-    return m_full ? m_length : 0U;
-  else if (m_tail < m_head)
-    return m_head - m_tail;
-  else
-    return m_length - m_tail + m_head;
-}
-
-bool CSerialRB::put(uint8_t c)
-{
-  if (m_full)
-    return false;
-
-  m_buffer[m_head] = c;
-
-  m_head++;
-  if (m_head >= m_length)
-    m_head = 0U;
-
-  if (m_head == m_tail)
-    m_full = true;
-
-  return true;
-}
-
-uint8_t CSerialRB::peek() const
-{
-  return m_buffer[m_tail];
-}
-
-uint8_t CSerialRB::get()
-{
-  uint8_t value = m_buffer[m_tail];
-
-  m_full = false;
-
-  m_tail++;
-  if (m_tail >= m_length)
-    m_tail = 0U;
-
-  return value;
-}
-

SerialRB.h

@@ -1,62 +0,0 @@
-/*
-Serial fifo control - Copyright (C) KI6ZUM 2015
-Copyright (C) 2015,2016 by Jonathan Naylor G4KLX
-
-This library is free software; you can redistribute it and/or
-modify it under the terms of the GNU Library General Public
-License as published by the Free Software Foundation; either
-version 2 of the License, or (at your option) any later version.
-
-This library is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-Library General Public License for more details.
-
-You should have received a copy of the GNU Library General Public
-License along with this library; if not, write to the
-Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
-Boston, MA  02110-1301, USA.
-*/
-
-#if !defined(SERIALRB_H)
-#define  SERIALRB_H
-
-#if defined(STM32F4XX)
-#include "stm32f4xx.h"
-#elif defined(STM32F7XX)
-#include "stm32f7xx.h"
-#elif defined(STM32F105xC)
-#include "stm32f1xx.h"
-#include <cstddef>
-#else
-#include <Arduino.h>
-#endif
-
-const uint16_t SERIAL_RINGBUFFER_SIZE = 370U;
-
-class CSerialRB {
-public:
-  CSerialRB(uint16_t length = SERIAL_RINGBUFFER_SIZE);
-
-  uint16_t getSpace() const;
-
-  uint16_t getData() const;
-
-  void reset();
-
-  bool put(uint8_t c);
-
-  uint8_t peek() const;
-
-  uint8_t get();
-
-private:
-  uint16_t          m_length;
-  volatile uint8_t* m_buffer;
-  volatile uint16_t m_head;
-  volatile uint16_t m_tail;
-  volatile bool     m_full;
-};
-
-#endif
-

SerialSTM.cpp

@@ -39,9 +39,7 @@ UART5  - TXD PC12 - RXD PD2 (Discovery, MMDVM-Pi, MMDVM-Pi F722 board, MMDVM-F4M
 
 #if defined(STM32F4XX) || defined(STM32F7XX)
 
-#define TX_SERIAL_FIFO_SIZE 512U
-#define RX_SERIAL_FIFO_SIZE 512U
-
+#include "STMUART.h"
 extern "C" {
    void USART1_IRQHandler();
    void USART2_IRQHandler();
@@ -52,111 +50,12 @@ extern "C" {
 /* ************* USART1 ***************** */
 #if defined(STM32F4_PI) || defined(STM32F4_F4M) || defined(STM32F722_F7M) || defined(STM32F722_PI) || defined(STM32F722_RPT_HAT) || defined(STM32F4_DVM) || (defined(STM32F4_NUCLEO) && defined(STM32F4_NUCLEO_ARDUINO_HEADER)) || defined(DRCC_DVM)
 
-volatile uint8_t  TXSerialfifo1[TX_SERIAL_FIFO_SIZE];
-volatile uint8_t  RXSerialfifo1[RX_SERIAL_FIFO_SIZE];
-volatile uint16_t TXSerialfifohead1, TXSerialfifotail1;
-volatile uint16_t RXSerialfifohead1, RXSerialfifotail1;
 
-// Init queues
-void TXSerialfifoinit1()
-{
-   TXSerialfifohead1 = 0U;
-   TXSerialfifotail1 = 0U;
-}
-
-void RXSerialfifoinit1()
-{
-   RXSerialfifohead1 = 0U;
-   RXSerialfifotail1 = 0U;
-}
-
-// How full is queue
-// TODO decide if how full or how empty is preferred info to return
-uint16_t TXSerialfifolevel1()
-{
-   uint32_t tail = TXSerialfifotail1;
-   uint32_t head = TXSerialfifohead1;
-
-   if (tail > head)
-      return TX_SERIAL_FIFO_SIZE + head - tail;
-   else
-      return head - tail;
-}
-
-uint16_t RXSerialfifolevel1()
-{
-   uint32_t tail = RXSerialfifotail1;
-   uint32_t head = RXSerialfifohead1;
-
-   if (tail > head)
-      return RX_SERIAL_FIFO_SIZE + head - tail;
-   else
-      return head - tail;
-}
-
-// Flushes the transmit shift register
-// warning: this call is blocking
-void TXSerialFlush1()
-{
-   // wait until the TXE shows the shift register is empty
-   while (USART_GetITStatus(USART1, USART_FLAG_TXE))
-      ;
-}
-
-uint8_t TXSerialfifoput1(uint8_t next)
-{
-   if (TXSerialfifolevel1() < TX_SERIAL_FIFO_SIZE) {
-      TXSerialfifo1[TXSerialfifohead1] = next;
-
-      TXSerialfifohead1++;
-      if (TXSerialfifohead1 >= TX_SERIAL_FIFO_SIZE)
-         TXSerialfifohead1 = 0U;
-
-      // make sure transmit interrupts are enabled as long as there is data to send
-      USART_ITConfig(USART1, USART_IT_TXE, ENABLE);
-      return 1U;
-   } else {
-      return 0U; // signal an overflow occurred by returning a zero count
-   }
-}
+static CSTMUART m_USART1;
 
 void USART1_IRQHandler()
 {
-   uint8_t c;
-
-   if (USART_GetITStatus(USART1, USART_IT_RXNE)) {
-      c = (uint8_t) USART_ReceiveData(USART1);
-
-      if (RXSerialfifolevel1() < RX_SERIAL_FIFO_SIZE) {
-         RXSerialfifo1[RXSerialfifohead1] = c;
-
-         RXSerialfifohead1++;
-         if (RXSerialfifohead1 >= RX_SERIAL_FIFO_SIZE)
-            RXSerialfifohead1 = 0U;
-      } else {
-         // TODO - do something if rx fifo is full?
-      }
-
-      USART_ClearITPendingBit(USART1, USART_IT_RXNE);
-   }
-
-   if (USART_GetITStatus(USART1, USART_IT_TXE)) {
-      c = 0U;
-
-      if (TXSerialfifohead1 != TXSerialfifotail1) { // if the fifo is not empty
-         c = TXSerialfifo1[TXSerialfifotail1];
-
-         TXSerialfifotail1++;
-         if (TXSerialfifotail1 >= TX_SERIAL_FIFO_SIZE)
-            TXSerialfifotail1 = 0U;
-
-         USART_SendData(USART1, c);
-      } else { // if there's no more data to transmit then turn off TX interrupts
-         USART_ITConfig(USART1, USART_IT_TXE, DISABLE);
-      }
-
-      USART_ClearITPendingBit(USART1, USART_IT_TXE);
-   }
+  m_USART1.handleIRQ();
 }
 
 void InitUSART1(int speed)
@@ -201,41 +100,7 @@ void InitUSART1(int speed)
 
    USART_ITConfig(USART1, USART_IT_RXNE, ENABLE);
 
-   // initialize the fifos
-   TXSerialfifoinit1();
-   RXSerialfifoinit1();
-}
-
-uint8_t AvailUSART1()
-{
-   if (RXSerialfifolevel1() > 0U)
-      return 1U;
-   else
-      return 0U;
-}
-
-int AvailForWriteUSART1()
-{
-   return TX_SERIAL_FIFO_SIZE - TXSerialfifolevel1();
-}
-
-uint8_t ReadUSART1()
-{
-   uint8_t data_c = RXSerialfifo1[RXSerialfifotail1];
-
-   RXSerialfifotail1++;
-   if (RXSerialfifotail1 >= RX_SERIAL_FIFO_SIZE)
-      RXSerialfifotail1 = 0U;
-
-   return data_c;
-}
-
-void WriteUSART1(const uint8_t* data, uint16_t length)
-{
-   for (uint16_t i = 0U; i < length; i++)
-      TXSerialfifoput1(data[i]);
-
-   USART_ITConfig(USART1, USART_IT_TXE, ENABLE);
+   m_USART1.init(USART1);
 }
 
 #endif
@@ -243,111 +108,12 @@ void WriteUSART1(const uint8_t* data, uint16_t length)
 /* ************* USART2 ***************** */
 #if defined(STM32F4_NUCLEO) || defined(STM32F4_RPT_HAT_TGO) || defined(DRCC_DVM)
 
-volatile uint8_t  TXSerialfifo2[TX_SERIAL_FIFO_SIZE];
-volatile uint8_t  RXSerialfifo2[RX_SERIAL_FIFO_SIZE];
-volatile uint16_t TXSerialfifohead2, TXSerialfifotail2;
-volatile uint16_t RXSerialfifohead2, RXSerialfifotail2;
+static CSTMUART m_USART2;
 
-// Init queues
-void TXSerialfifoinit2()
-{
-   TXSerialfifohead2 = 0U;
-   TXSerialfifotail2 = 0U;
-}
-
-void RXSerialfifoinit2()
-{
-   RXSerialfifohead2 = 0U;
-   RXSerialfifotail2 = 0U;
-}
-
-// How full is queue
-// TODO decide if how full or how empty is preferred info to return
-uint16_t TXSerialfifolevel2()
-{
-   uint32_t tail = TXSerialfifotail2;
-   uint32_t head = TXSerialfifohead2;
-
-   if (tail > head)
-      return TX_SERIAL_FIFO_SIZE + head - tail;
-   else
-      return head - tail;
-}
-
-uint16_t RXSerialfifolevel2()
-{
-   uint32_t tail = RXSerialfifotail2;
-   uint32_t head = RXSerialfifohead2;
-
-   if (tail > head)
-      return RX_SERIAL_FIFO_SIZE + head - tail;
-   else
-      return head - tail;
-}
-
-// Flushes the transmit shift register
-// warning: this call is blocking
-void TXSerialFlush2()
-{
-   // wait until the TXE shows the shift register is empty
-   while (USART_GetITStatus(USART2, USART_FLAG_TXE))
-      ;
-}
-
-uint8_t TXSerialfifoput2(uint8_t next)
-{
-   if (TXSerialfifolevel2() < TX_SERIAL_FIFO_SIZE) {
-      TXSerialfifo2[TXSerialfifohead2] = next;
-
-      TXSerialfifohead2++;
-      if (TXSerialfifohead2 >= TX_SERIAL_FIFO_SIZE)
-         TXSerialfifohead2 = 0U;
-
-      // make sure transmit interrupts are enabled as long as there is data to send
-      USART_ITConfig(USART2, USART_IT_TXE, ENABLE);
-      return 1U;
-   } else {
-      return 0U; // signal an overflow occurred by returning a zero count
-   }
-}
 
 void USART2_IRQHandler()
 {
-   uint8_t c;
-
-   if (USART_GetITStatus(USART2, USART_IT_RXNE)) {
-      c = (uint8_t) USART_ReceiveData(USART2);
-
-      if (RXSerialfifolevel2() < RX_SERIAL_FIFO_SIZE) {
-         RXSerialfifo2[RXSerialfifohead2] = c;
-
-         RXSerialfifohead2++;
-         if (RXSerialfifohead2 >= RX_SERIAL_FIFO_SIZE)
-            RXSerialfifohead2 = 0U;
-      } else {
-         // TODO - do something if rx fifo is full?
-      }
-
-      USART_ClearITPendingBit(USART2, USART_IT_RXNE);
-   }
-
-   if (USART_GetITStatus(USART2, USART_IT_TXE)) {
-      c = 0U;
-
-      if (TXSerialfifohead2 != TXSerialfifotail2) { // if the fifo is not empty
-         c = TXSerialfifo2[TXSerialfifotail2];
-
-         TXSerialfifotail2++;
-         if (TXSerialfifotail2 >= TX_SERIAL_FIFO_SIZE)
-            TXSerialfifotail2 = 0U;
-
-         USART_SendData(USART2, c);
-      } else { // if there's no more data to transmit then turn off TX interrupts
-         USART_ITConfig(USART2, USART_IT_TXE, DISABLE);
-      }
-
-      USART_ClearITPendingBit(USART2, USART_IT_TXE);
-   }
+   m_USART2.handleIRQ();
 }
 
 void InitUSART2(int speed)
@@ -392,41 +158,7 @@ void InitUSART2(int speed)
 
    USART_ITConfig(USART2, USART_IT_RXNE, ENABLE);
 
-   // initialize the fifos
-   TXSerialfifoinit2();
-   RXSerialfifoinit2();
-}
-
-uint8_t AvailUSART2()
-{
-   if (RXSerialfifolevel2() > 0U)
-      return 1U;
-   else
-      return 0U;
-}
-
-int AvailForWriteUSART2()
-{
-   return TX_SERIAL_FIFO_SIZE - TXSerialfifolevel2();
-}
-
-uint8_t ReadUSART2()
-{
-   uint8_t data_c = RXSerialfifo2[RXSerialfifotail2];
-
-   RXSerialfifotail2++;
-   if (RXSerialfifotail2 >= RX_SERIAL_FIFO_SIZE)
-      RXSerialfifotail2 = 0U;
-
-   return data_c;
-}
-
-void WriteUSART2(const uint8_t* data, uint16_t length)
-{
-   for (uint16_t i = 0U; i < length; i++)
-      TXSerialfifoput2(data[i]);
-
-   USART_ITConfig(USART2, USART_IT_TXE, ENABLE);
+   m_USART2.init(USART2);
 }
 
 #endif
@@ -434,111 +166,11 @@ void WriteUSART2(const uint8_t* data, uint16_t length)
 /* ************* USART3 ***************** */
 #if defined(STM32F4_DISCOVERY) || defined(STM32F7_NUCLEO)
 
-volatile uint8_t  TXSerialfifo3[TX_SERIAL_FIFO_SIZE];
-volatile uint8_t  RXSerialfifo3[RX_SERIAL_FIFO_SIZE];
-volatile uint16_t TXSerialfifohead3, TXSerialfifotail3;
-volatile uint16_t RXSerialfifohead3, RXSerialfifotail3;
-
-// Init queues
-void TXSerialfifoinit3()
-{
-   TXSerialfifohead3 = 0U;
-   TXSerialfifotail3 = 0U;
-}
-
-void RXSerialfifoinit3()
-{
-   RXSerialfifohead3 = 0U;
-   RXSerialfifotail3 = 0U;
-}
-
-// How full is queue
-// TODO decide if how full or how empty is preferred info to return
-uint16_t TXSerialfifolevel3()
-{
-   uint32_t tail = TXSerialfifotail3;
-   uint32_t head = TXSerialfifohead3;
-
-   if (tail > head)
-      return TX_SERIAL_FIFO_SIZE + head - tail;
-   else
-      return head - tail;
-}
-
-uint16_t RXSerialfifolevel3()
-{
-   uint32_t tail = RXSerialfifotail3;
-   uint32_t head = RXSerialfifohead3;
-
-   if (tail > head)
-      return RX_SERIAL_FIFO_SIZE + head - tail;
-   else
-      return head - tail;
-}
-
-// Flushes the transmit shift register
-// warning: this call is blocking
-void TXSerialFlush3()
-{
-   // wait until the TXE shows the shift register is empty
-   while (USART_GetITStatus(USART3, USART_FLAG_TXE))
-      ;
-}
-
-uint8_t TXSerialfifoput3(uint8_t next)
-{
-   if (TXSerialfifolevel3() < TX_SERIAL_FIFO_SIZE) {
-      TXSerialfifo3[TXSerialfifohead3] = next;
-
-      TXSerialfifohead3++;
-      if (TXSerialfifohead3 >= TX_SERIAL_FIFO_SIZE)
-         TXSerialfifohead3 = 0U;
-
-      // make sure transmit interrupts are enabled as long as there is data to send
-      USART_ITConfig(USART3, USART_IT_TXE, ENABLE);
-      return 1U;
-   } else {
-      return 0U; // signal an overflow occurred by returning a zero count
-   }
-}
+static CSTMUART m_USART3;
 
 void USART3_IRQHandler()
 {
-   uint8_t c;
-
-   if (USART_GetITStatus(USART3, USART_IT_RXNE)) {
-      c = (uint8_t) USART_ReceiveData(USART3);
-
-      if (RXSerialfifolevel3() < RX_SERIAL_FIFO_SIZE) {
-         RXSerialfifo3[RXSerialfifohead3] = c;
-
-         RXSerialfifohead3++;
-         if (RXSerialfifohead3 >= RX_SERIAL_FIFO_SIZE)
-            RXSerialfifohead3 = 0U;
-      } else {
-         // TODO - do something if rx fifo is full?
-      }
-
-      USART_ClearITPendingBit(USART3, USART_IT_RXNE);
-   }
-
-   if (USART_GetITStatus(USART3, USART_IT_TXE)) {
-      c = 0U;
-
-      if (TXSerialfifohead3 != TXSerialfifotail3) { // if the fifo is not empty
-         c = TXSerialfifo3[TXSerialfifotail3];
-
-         TXSerialfifotail3++;
-         if (TXSerialfifotail3 >= TX_SERIAL_FIFO_SIZE)
-            TXSerialfifotail3 = 0U;
-
-         USART_SendData(USART3, c);
-      } else { // if there's no more data to transmit then turn off TX interrupts
-         USART_ITConfig(USART3, USART_IT_TXE, DISABLE);
-      }
-
-      USART_ClearITPendingBit(USART3, USART_IT_TXE);
-   }
+   m_USART3.handleIRQ();
 }
 
 #if defined(STM32F7_NUCLEO)
@@ -600,41 +232,7 @@ void InitUSART3(int speed)
 
    USART_ITConfig(USART3, USART_IT_RXNE, ENABLE);
 
-   // initialize the fifos
-   TXSerialfifoinit3();
-   RXSerialfifoinit3();
-}
-
-uint8_t AvailUSART3()
-{
-   if (RXSerialfifolevel3() > 0U)
-      return 1U;
-   else
-      return 0U;
-}
-
-int AvailForWriteUSART3()
-{
-   return TX_SERIAL_FIFO_SIZE - TXSerialfifolevel3();
-}
-
-uint8_t ReadUSART3()
-{
-   uint8_t data_c = RXSerialfifo3[RXSerialfifotail3];
-
-   RXSerialfifotail3++;
-   if (RXSerialfifotail3 >= RX_SERIAL_FIFO_SIZE)
-      RXSerialfifotail3 = 0U;
-
-   return data_c;
-}
-
-void WriteUSART3(const uint8_t* data, uint16_t length)
-{
-   for (uint16_t i = 0U; i < length; i++)
-      TXSerialfifoput3(data[i]);
-
-   USART_ITConfig(USART3, USART_IT_TXE, ENABLE);
+   m_USART3.init(USART3);
 }
 
 #endif
@@ -642,111 +240,11 @@ void WriteUSART3(const uint8_t* data, uint16_t length)
 /* ************* UART5 ***************** */
 #if !(defined(STM32F4_NUCLEO) && defined(STM32F4_NUCLEO_ARDUINO_HEADER))
 
-volatile uint8_t  TXSerialfifo5[TX_SERIAL_FIFO_SIZE];
-volatile uint8_t  RXSerialfifo5[RX_SERIAL_FIFO_SIZE];
-volatile uint16_t TXSerialfifohead5, TXSerialfifotail5;
-volatile uint16_t RXSerialfifohead5, RXSerialfifotail5;
-
-// Init queues
-void TXSerialfifoinit5()
-{
-   TXSerialfifohead5 = 0U;
-   TXSerialfifotail5 = 0U;
-}
-
-void RXSerialfifoinit5()
-{
-   RXSerialfifohead5 = 0U;
-   RXSerialfifotail5 = 0U;
-}
-
-// How full is queue
-// TODO decide if how full or how empty is preferred info to return
-uint16_t TXSerialfifolevel5()
-{
-   uint32_t tail = TXSerialfifotail5;
-   uint32_t head = TXSerialfifohead5;
-
-   if (tail > head)
-      return TX_SERIAL_FIFO_SIZE + head - tail;
-   else
-      return head - tail;
-}
-
-uint16_t RXSerialfifolevel5()
-{
-   uint32_t tail = RXSerialfifotail5;
-   uint32_t head = RXSerialfifohead5;
-
-   if (tail > head)
-      return RX_SERIAL_FIFO_SIZE + head - tail;
-   else
-      return head - tail;
-}
-
-// Flushes the transmit shift register
-// warning: this call is blocking
-void TXSerialFlush5()
-{
-   // wait until the TXE shows the shift register is empty
-   while (USART_GetITStatus(UART5, USART_FLAG_TXE))
-      ;
-}
-
-uint8_t TXSerialfifoput5(uint8_t next)
-{
-   if (TXSerialfifolevel5() < TX_SERIAL_FIFO_SIZE) {
-      TXSerialfifo5[TXSerialfifohead5] = next;
-
-      TXSerialfifohead5++;
-      if (TXSerialfifohead5 >= TX_SERIAL_FIFO_SIZE)
-         TXSerialfifohead5 = 0U;
-
-      // make sure transmit interrupts are enabled as long as there is data to send
-      USART_ITConfig(UART5, USART_IT_TXE, ENABLE);
-      return 1U;
-   } else {
-      return 0U; // signal an overflow occurred by returning a zero count
-   }
-}
+static CSTMUART m_UART5;
 
 void UART5_IRQHandler()
 {
-   uint8_t c;
-
-   if (USART_GetITStatus(UART5, USART_IT_RXNE)) {
-      c = (uint8_t) USART_ReceiveData(UART5);
-
-      if (RXSerialfifolevel5() < RX_SERIAL_FIFO_SIZE) {
-         RXSerialfifo5[RXSerialfifohead5] = c;
-
-         RXSerialfifohead5++;
-         if (RXSerialfifohead5 >= RX_SERIAL_FIFO_SIZE)
-            RXSerialfifohead5 = 0U;
-      } else {
-         // TODO - do something if rx fifo is full?
-      }
-
-      USART_ClearITPendingBit(UART5, USART_IT_RXNE);
-   }
-
-   if (USART_GetITStatus(UART5, USART_IT_TXE)) {
-      c = 0U;
-
-      if (TXSerialfifohead5 != TXSerialfifotail5) { // if the fifo is not empty
-         c = TXSerialfifo5[TXSerialfifotail5];
-
-         TXSerialfifotail5++;
-         if (TXSerialfifotail5 >= TX_SERIAL_FIFO_SIZE)
-            TXSerialfifotail5 = 0U;
-
-         USART_SendData(UART5, c);
-      } else { // if there's no more data to transmit then turn off TX interrupts
-      USART_ITConfig(UART5, USART_IT_TXE, DISABLE);
-      }
-
-      USART_ClearITPendingBit(UART5, USART_IT_TXE);
-   }
+   m_UART5.handleIRQ();
 }
 
 void InitUART5(int speed)
@@ -795,41 +293,7 @@ void InitUART5(int speed)
 
    USART_ITConfig(UART5, USART_IT_RXNE, ENABLE);
 
-   // initialize the fifos
-   TXSerialfifoinit5();
-   RXSerialfifoinit5();
-}
-
-uint8_t AvailUART5()
-{
-   if (RXSerialfifolevel5() > 0U)
-      return 1U;
-   else
-      return 0U;
-}
-
-int AvailForWriteUART5()
-{
-   return TX_SERIAL_FIFO_SIZE - TXSerialfifolevel5();
-}
-
-uint8_t ReadUART5()
-{
-   uint8_t data_c = RXSerialfifo5[RXSerialfifotail5];
-
-   RXSerialfifotail5++;
-   if (RXSerialfifotail5 >= RX_SERIAL_FIFO_SIZE)
-      RXSerialfifotail5 = 0U;
-
-   return data_c;
-}
-
-void WriteUART5(const uint8_t* data, uint16_t length)
-{
-   for (uint16_t i = 0U; i < length; i++)
-      TXSerialfifoput5(data[i]);
-
-   USART_ITConfig(UART5, USART_IT_TXE, ENABLE);
+   m_UART5.init(UART5);
 }
 
 #endif
@@ -868,21 +332,21 @@ int CSerialPort::availableInt(uint8_t n)
    switch (n) {
       case 1U:
          #if defined(STM32F4_DISCOVERY) || defined(STM32F7_NUCLEO)
-         return AvailUSART3();
+         return m_USART3.availble();//AvailUSART3();
          #elif defined(STM32F4_PI) || defined(STM32F4_F4M) || defined(STM32F722_PI) || defined(STM32F722_F7M) || defined(STM32F722_RPT_HAT) || defined(STM32F4_DVM)
-         return AvailUSART1();
+         return m_USART1.available();//AvailUSART1();
          #elif defined(STM32F4_NUCLEO) || defined(STM32F4_RPT_HAT_TGO)
-         return AvailUSART2();
+         return m_USART2.available();//AvailUSART2();
          #elif defined(DRCC_DVM)
-         return AvailUSART1();
+         return m_USART1.available();//AvailUSART1();
          #endif
       case 3U:
          #if defined(STM32F4_NUCLEO) && defined(STM32F4_NUCLEO_ARDUINO_HEADER)
-         return AvailUSART1();
+         return m_USART1.available(); //AvailUSART1();
          #elif defined(DRCC_DVM)
-         return AvailUSART2();
+         return m_USART2.available(); //AvailUSART2();
          #else
-         return AvailUART5();
+         return m_UART5.available();//AvailUART5();
          #endif
       default:
          return 0;
@@ -894,21 +358,21 @@ int CSerialPort::availableForWriteInt(uint8_t n)
    switch (n) {
       case 1U:
          #if defined(STM32F4_DISCOVERY) || defined(STM32F7_NUCLEO)
-         return AvailForWriteUSART3();
+         return m_USART3.availableForWrite(); //AvailForWriteUSART3();
          #elif defined(STM32F4_PI) || defined(STM32F4_F4M) || defined(STM32F722_PI) || defined(STM32F722_F7M) || defined(STM32F722_RPT_HAT) || defined(STM32F4_DVM)
-         return AvailForWriteUSART1();
+         return m_USART1.availableForWrite(); //AvailForWriteUSART1();
          #elif defined(STM32F4_NUCLEO) || defined(STM32F4_RPT_HAT_TGO)
-         return AvailForWriteUSART2();
+         return m_USART2.availableForWrite();//AvailForWriteUSART2();
          #elif defined(DRCC_DVM)
-         return AvailForWriteUSART1();
+         return m_USART1.availableForWrite();//AvailForWriteUSART1();
          #endif
       case 3U:
          #if defined(STM32F4_NUCLEO) && defined(STM32F4_NUCLEO_ARDUINO_HEADER)
-         return AvailForWriteUSART1();
+         return m_USART1.availableForWrite(); //AvailForWriteUSART1();
          #elif defined(DRCC_DVM)
-         return AvailForWriteUSART2();
+         return m_USART2.availableForWrite();//AvailForWriteUSART2();
          #else
-         return AvailForWriteUART5();
+         return m_UART5.availableForWrite();//AvailForWriteUART5();
          #endif
       default:
          return 0;
@@ -920,21 +384,21 @@ uint8_t CSerialPort::readInt(uint8_t n)
    switch (n) {
       case 1U:
          #if defined(STM32F4_DISCOVERY) || defined(STM32F7_NUCLEO)
-         return ReadUSART3();
+         return m_USART3.read();//ReadUSART3();
          #elif defined(STM32F4_PI) || defined(STM32F4_F4M) || defined(STM32F722_PI) || defined(STM32F722_F7M) || defined(STM32F722_RPT_HAT) || defined(STM32F4_DVM)
-         return ReadUSART1();
+         return m_USART1.read();//ReadUSART1();
          #elif defined(STM32F4_NUCLEO) || defined(STM32F4_RPT_HAT_TGO)
-         return ReadUSART2();
+         return m_USART2.read();//ReadUSART2();
          #elif defined(DRCC_DVM)
-         return ReadUSART1();
+         return m_USART1.read();//ReadUSART1();
          #endif
       case 3U:
          #if defined(STM32F4_NUCLEO) && defined(STM32F4_NUCLEO_ARDUINO_HEADER)
-         return ReadUSART1();
+         return m_USART1.read();//ReadUSART1();
          #elif defined(DRCC_DVM)
-         return ReadUSART2();
+         return m_USART2.read();//ReadUSART2();
          #else
-         return ReadUART5();
+         return m_UART5.read();//ReadUART5();
          #endif
       default:
          return 0U;
@@ -946,36 +410,36 @@ void CSerialPort::writeInt(uint8_t n, const uint8_t* data, uint16_t length, bool
    switch (n) {
       case 1U:
          #if defined(STM32F4_DISCOVERY) || defined(STM32F7_NUCLEO)
-         WriteUSART3(data, length);
+         m_USART3.write(data, length); //WriteUSART3(data, length);
          if (flush)
-            TXSerialFlush3();
+            m_USART3.flush();//TXSerialFlush3();
          #elif defined(STM32F4_PI) || defined(STM32F4_F4M) || defined(STM32F722_PI) || defined(STM32F722_F7M) || defined(STM32F722_RPT_HAT) || defined(STM32F4_DVM)
-         WriteUSART1(data, length);
+         m_USART1.write(data, length);//WriteUSART1(data, length);
          if (flush)
-            TXSerialFlush1();
+            m_USART1.flush();//TXSerialFlush1();
          #elif defined(STM32F4_NUCLEO) || defined(STM32F4_RPT_HAT_TGO)
-         WriteUSART2(data, length);
+         m_USART2.write(data, length);//WriteUSART2(data, length);
          if (flush)
-            TXSerialFlush2();
+            m_USART2.flush();//TXSerialFlush2();
          #elif defined(DRCC_DVM)
-         WriteUSART1(data, length);
+         m_USART1.write(data, length);//WriteUSART1(data, length);
          if (flush)
-            TXSerialFlush1();
+            m_USART1.flush();//TXSerialFlush1();
          #endif
          break;
       case 3U:
          #if defined(STM32F4_NUCLEO) && defined(STM32F4_NUCLEO_ARDUINO_HEADER)
-         WriteUSART1(data, length);
+         m_USART1.write(data, length); //WriteUSART1(data, length);
          if (flush)
-            TXSerialFlush1();
+            m_USART1.flush();
          #elif defined(DRCC_DVM)
-         WriteUSART2(data, length);
+         m_USART2.write(data, length);//WriteUSART2(data, length);
          if (flush)
-            TXSerialFlush2();
+            m_USART2.flush();//TXSerialFlush2();
          #else
-         WriteUART5(data, length);
+         m_UART5.write(data, length);//WriteUART5(data, length);
          if (flush)
-            TXSerialFlush5();
+            m_UART5.flush();//TXSerialFlush5();
          #endif
          break;
       default:

Tools/FMGenerateFilterCoefficients.py

@@ -17,30 +17,30 @@ f2 = 2700
 rp = 0.2
 
 # scaling factor in bits, do not change !
-q = 0
+q = 15
 # scaling factor as facor...
 scaling_factor = 2**q
 
 # let's generate a sequence of 2nd order IIR filters
 sos = signal.cheby1(3,rp,[f1, f2],'bandpass', output='sos', fs=fs)
-#sos = signal.cheby1(1, rp, 2122, 'lowpass', output='sos', fs=fs) #deemphasis filter
+#os = signal.cheby1(4, rp, f2, 'lowpass', output='sos', fs=fs) #deemphasis filter
 #sos = signal.cheby1(1, rp, 2122, 'highpass', output='sos', fs=fs) #deemphasis filter
 
-#sos = np.round((sos) * scaling_factor)
+sosrounded = np.round((sos) * scaling_factor)
 
 # print coefficients
-for biquad in sos:
+for biquad in sosrounded:
     for coeff in biquad:
-        #print(int(coeff),",",sep="",end="")
-        print((coeff),",",sep="",end="")
+        print(int(coeff),",",sep="",end="")
+        #print((coeff),",",sep="",end="")
     print("")
 
 # plot the frequency response
 b,a = signal.sos2tf(sos)
-w,h = signal.freqz(b,a)
+w,h = signal.freqz(b,a, worN=2048)
 pl.plot(w/np.pi/2*fs,20*np.log(np.abs(h)))
 pl.xlabel('frequency/Hz');
 pl.ylabel('gain/dB');
-pl.ylim(top=1,bottom=-20);
+pl.ylim(top=1,bottom=-30);
 pl.xlim(left=250, right=12000);
 pl.show()

YSFTX.cpp

@@ -73,7 +73,8 @@ void CYSFTX::process()
         m_poBuffer[m_poLen++] = YSF_START_SYNC;
     } else {
       for (uint8_t i = 0U; i < YSF_FRAME_LENGTH_BYTES; i++) {
-        uint8_t c = m_buffer.get();
+        uint8_t c = 0U;
+        m_buffer.get(c);
         m_poBuffer[m_poLen++] = c;
       }
     }

YSFTX.h

@@ -21,7 +21,7 @@
 
 #include "Config.h"
 
-#include "SerialRB.h"
+#include "RingBuffer.h"
 
 class CYSFTX {
 public:
@@ -38,7 +38,7 @@ public:
   void setParams(bool on, uint8_t txHang);
 
 private:
-  CSerialRB                        m_buffer;
+  CRingBuffer<uint8_t>                        m_buffer;
   arm_fir_interpolate_instance_q15 m_modFilter;
   q15_t                            m_modState[16U];    // blockSize + phaseLength - 1, 4 + 9 - 1 plus some spare
   uint8_t                          m_poBuffer[1200U];

pins/pins_f4_drcc_nqf.h

@@ -22,40 +22,36 @@
 /*
 Pin definitions for DRCC_DVM BG7NQF  board rev1
 
-TX/PTT_LED  PB12   output
-RX/COS_LED  PB5    output
-STATUS_LED  PB10   output
+PTT      PB12   output
+LED_PTT  PB4    output
+LED_COS  PB5    output
+LED_SRV  PB10   output
+COS      PB13   input
 
-COS_IN      PB13   input
+DSTAR    N/A
+DMR      N/A
+YSF      N/A
+P25      N/A
+NXDN     N/A
+POCSAG   N/A
 
-DSTAR       N/A
-DMR         N/A
-YSF         N/A
-P25         N/A
-NXDN        N/A
-POCSAG      N/A
+MDSTAR   PB14   output
+MDMR     PB8    output
+MYSF     PB9    output
+MP25     PB15   output
+MNXDN    N/A
+MPOCSAG  N/A
 
-MDMR/BIT0   PB8    output
-MYSF/BIT1   PB9    output
-MDSTAR/BIT2 PB14   output
-MP25/BIT3   PB15   output          Generic Mode Pins
-MNXDN       N/A
-MPOCSAG     N/A
+RX       PB0    analog input
+RSSI     PB1    analog input
+TX       PA4    analog output
 
-RX          PA0    analog input
-RSSI        PA1    analog input
-TX          PA4    analog output
+EXT_CLK  PA15   input
 
-EXT_CLK     PA15   input
-
-UART1_TX    PA9    output
-UART1_RX    PA10   output          Host Data Communication
-
-UART2_TX    PA2    output
-UART2_RX    PA3    output          Nextion Data Communication
-
-I2C1_SCL    PB6    output
-I2C1_SDA    PB7    output          OLED Data Communication as master
+UART1_TX PA9    output
+UART1_RX PA10   output
+UART2_TX PA2    output
+UART2_RX PA3    output
 
 */
 
@@ -128,13 +124,13 @@ I2C1_SDA    PB7    output          OLED Data Communication as master
 
 #define PIN_RX            GPIO_Pin_0
 #define PIN_RX_CH         ADC_Channel_0
-#define PORT_RX           GPIOA
-#define RCC_Per_RX        RCC_AHB1Periph_GPIOA
+#define PORT_RX           GPIOB
+#define RCC_Per_RX        RCC_AHB1Periph_GPIOB
 
 #define PIN_RSSI          GPIO_Pin_1
 #define PIN_RSSI_CH       ADC_Channel_1
-#define PORT_RSSI         GPIOA
-#define RCC_Per_RSSI      RCC_AHB1Periph_GPIOA
+#define PORT_RSSI         GPIOB
+#define RCC_Per_RSSI      RCC_AHB1Periph_GPIOB
 
 #define PIN_TX            GPIO_Pin_4
 #define PIN_TX_CH         DAC_Channel_1