STM32F4XX_Lib @ bcd346f530
Add submodules for F4/F7 libs
2018-06-23 22:40:13 +02:00
STM32F7XX_Lib @ 2d5f4236fa
Add submodules for F4/F7 libs
2018-06-23 22:40:13 +02:00
STM32F10X_Lib @ 417e0c2f4a
add STM32F10X_Lib
2019-05-13 21:59:32 +08:00
Tools
Restore Passband
2020-04-29 20:43:01 +02:00
pins
update pin defs for drcc/nqf board
2020-05-18 12:18:44 +08:00
system_stm32f1xx
Adding conditional compilation for Arduino 1.6.7 fix
2017-04-02 22:17:09 -03:00
.gitignore
Add submodules for F4/F7 libs
2018-06-23 22:40:13 +02:00
.gitmodules
add STM32F10X_Lib
2019-05-13 21:59:32 +08:00
BUILD.txt
More info on Linux & newer libraries OK
2016-09-14 22:57:34 +01:00
CWIdTX.cpp
Add the dot to the CW Id.
2020-05-05 21:00:36 +01:00
CWIdTX.h
Small CW Id cleanups.
2016-05-10 06:35:53 +01:00
CalDMR.cpp
Add DMR 1031 Hz Test Pattern for DMO mode
2018-02-11 21:37:54 -03:00
CalDMR.h
Add DMR 1031 Hz Test Pattern for DMO mode
2018-02-11 21:37:54 -03:00
CalDStarRX.cpp
More changes to the D-Star RX.
2017-07-03 20:26:24 +01:00
CalDStarRX.h
Add DMR calibration.
2016-04-14 17:42:38 +01:00
CalDStarTX.cpp
Add DMR calibration.
2016-04-14 17:42:38 +01:00
CalDStarTX.h
Add DMR calibration.
2016-04-14 17:42:38 +01:00
CalFM.cpp
Rescale the FM calibration output.
2020-05-10 17:31:21 +01:00
CalFM.h
Add FM Cal modes
2020-04-27 14:18:42 +01:00
CalNXDN.cpp
Add NXDN 1031 Hz Test Pattern
2018-02-12 10:34:49 -03:00
CalNXDN.h
Add NXDN 1031 Hz Test Pattern
2018-02-12 10:34:49 -03:00
CalP25.cpp
Add comments
2018-01-07 09:48:30 -03:00
CalP25.h
Changing name DMR1KCAL to DMRCAL1K
2018-01-07 00:24:58 -03:00
CalPOCSAG.cpp
Do the POCSAG calibration in a different way.
2019-01-30 14:31:15 +00:00
CalPOCSAG.h
Simplify the POCSAG calibration code.
2019-01-30 11:18:16 +00:00
CalRSSI.cpp
Small tweaks.
2016-12-30 11:34:31 +00:00
CalRSSI.h
Add the RSSI calibration mode.
2016-12-28 18:07:31 +00:00
Config.h
Set the modem state in SET_CONFIG.
2020-05-02 17:37:47 +01:00
DMRDMORX.cpp
Remove any DC offset from before any further filtering takes place.
2017-07-16 18:57:15 +01:00
DMRDMORX.h
Remove the unused sample dumping code.
2017-04-10 17:51:44 +01:00
DMRDMOTX.cpp
Change 1.2 kHz fill tone by a pseudo random fill (DMR DMO)
2018-06-01 14:39:02 -04:00
DMRDMOTX.h
Revert the DMR DMO TX changes.
2017-04-17 09:25:38 +01:00
DMRDefines.h
Add new interpolation for most modes and start positioning for P25 and YSF.
2017-02-06 21:02:45 +00:00
DMRIdleRX.cpp
Make modem debugging a run-time parameter, not compile-time.
2017-04-14 14:19:00 +01:00
DMRIdleRX.h
Remove the unused sample dumping code.
2017-04-10 17:51:44 +01:00
DMRRX.cpp
Add dummy RSSI sampling code.
2016-10-31 19:39:32 +00:00
DMRRX.h
Add dummy RSSI sampling code.
2016-10-31 19:39:32 +00:00
DMRSlotRX.cpp
Remove any DC offset from before any further filtering takes place.
2017-07-16 18:57:15 +01:00
DMRSlotRX.h
Remove the unused sample dumping code.
2017-04-10 17:51:44 +01:00
DMRSlotType.cpp
Initial commit
2016-01-14 18:57:21 +00:00
DMRSlotType.h
Initial commit
2016-01-14 18:57:21 +00:00
DMRTX.cpp
Fix Nucleo compiler issues.
2018-04-17 22:32:39 +01:00
DMRTX.h
Fix Nucleo compiler issues.
2018-04-17 22:32:39 +01:00
DStarDefines.h
First compileable version, but untested.
2017-07-06 20:28:20 +01:00
DStarRX.cpp
Reducing the bit error number for the EOT sequence (D-Star)
2018-01-10 20:04:29 -03:00
DStarRX.h
Re-add the const qualifiers.
2017-08-18 11:04:06 +01:00
DStarTX.cpp
Merge branch 'master' into dstar_correlator
2018-09-18 09:29:04 +01:00
DStarTX.h
Using CMSIS FIR interpolator for all modulators
2017-04-01 01:29:35 -03:00
Debug.h
Add a ring buffer to the serial repeater. Uncompiled on the STM32
2017-04-24 18:02:36 +01:00
FM.cpp
Set the COS LED correctly.
2020-05-19 12:09:44 +01:00
FM.h
Add CTCSS hysteresis.
2020-05-12 13:55:30 +01:00
FMBlanking.cpp
Add optional over deviation blanking.
2020-04-25 22:32:10 +01:00
FMBlanking.h
Add optional over deviation blanking.
2020-04-25 22:32:10 +01:00
FMCTCSSRX.cpp
Add CTCSS hysteresis.
2020-05-12 13:55:30 +01:00
FMCTCSSRX.h
Add CTCSS hysteresis.
2020-05-12 13:55:30 +01:00
FMCTCSSTX.cpp
Fix the multiplication.
2020-04-26 15:24:51 +01:00
FMCTCSSTX.h
Allow for two levels of the callsign.
2020-04-22 22:10:34 +01:00
FMDirectForm1.h
Add de and pre emphasis
2020-04-29 20:42:20 +02:00
FMDownsampleRB.cpp
Add Downsampling
2020-04-28 21:37:06 +02:00
FMDownsampleRB.h
Buffer output after adding some initial silence.
2020-05-08 15:48:03 +01:00
FMDownsampler.cpp
Add Downsampling
2020-04-28 21:37:06 +02:00
FMDownsampler.h
Buffer output after adding some initial silence.
2020-05-08 15:48:03 +01:00
FMKeyer.cpp
Try and make the closing callsign appear.
2020-05-18 11:09:56 +01:00
FMKeyer.h
Try and make the closing callsign appear.
2020-05-18 11:09:56 +01:00
FMRB.cpp
Buffer output after adding some initial silence.
2020-05-08 15:48:03 +01:00
FMRB.h
Buffer output after adding some initial silence.
2020-05-08 15:48:03 +01:00
FMTimeout.cpp
Allow for two levels of the callsign.
2020-04-22 22:10:34 +01:00
FMTimeout.h
Allow for two levels of the callsign.
2020-04-22 22:10:34 +01:00
FMTimer.cpp
Add the timer class functionality.
2020-04-15 17:18:01 +01:00
FMTimer.h
Add the timer class functionality.
2020-04-15 17:18:01 +01:00
Globals.h
Add FM Cal modes
2020-04-27 14:18:42 +01:00
I2CTeensy.cpp
Add support VK6MST_Shield Serial pass-thru
2018-07-20 21:00:09 +10:00
IO.cpp
Merge branch 'FM' into boxcar_dstar_correlator_fm
2020-04-29 21:42:10 +01:00
IO.h
Merge branch 'FM' into boxcar_dstar_correlator_fm
2020-04-29 21:42:10 +01:00
IODue.cpp
Set up the FM mode pins, partially.
2020-04-18 14:31:21 +01:00
IOPins.h
Supports drcc_dvm_nqf board
2020-05-13 13:51:02 +08:00
IOSTM.cpp
Init FM led/mode GPIO pin
2020-05-13 16:28:05 +08:00
IOSTM_CMSIS.cpp
Better LED management
2020-05-04 19:12:45 +02:00
IOTeensy.cpp
Set up the FM mode pins, partially.
2020-04-18 14:31:21 +01:00
LICENCE
Initial commit
2016-01-14 18:57:21 +00:00
MMDVM.cpp
Add FM Cal modes
2020-04-27 14:18:42 +01:00
MMDVM.ino
Add FM Cal modes
2020-04-27 14:18:42 +01:00
Makefile
Generate bin map file for analysis
2020-05-18 12:19:22 +08:00
Makefile.Arduino
Create .bin on compile target instead of upload
2017-09-10 14:04:41 +02:00
Makefile.CMSIS
Make STM32F1_POG as default type when Makefile.CMSIS is used
2019-05-14 11:53:21 +08:00
NXDNDefines.h
Add support for NXDN 4800.
2018-02-07 20:25:16 +00:00
NXDNRX.cpp
Make NXDN sync detection more lenient when receiving a transmission.
2018-02-08 18:40:23 +00:00
NXDNRX.h
Revert "Start work on 4800 baud NXDN support."
2018-02-07 18:07:51 +00:00
NXDNTX.cpp
Fix the TX Hang handling.
2020-05-20 15:16:12 +01:00
NXDNTX.h
Add transmit hangs to NXDN and P25.
2020-05-06 17:42:46 +01:00
P25Defines.h
fix proper PDU reception and processing;
2018-10-08 10:19:31 -04:00
P25RX.cpp
fix proper PDU reception and processing;
2018-10-08 10:19:31 -04:00
P25RX.h
Fix commit with bad line endings.
2018-05-14 10:11:58 -04:00
P25TX.cpp
Fix the TX Hang handling.
2020-05-20 15:16:12 +01:00
P25TX.h
Add transmit hangs to NXDN and P25.
2020-05-06 17:42:46 +01:00
POCSAGTX.cpp
Additional check to transmit all POCSAG buffer
2018-07-20 20:31:38 -04:00
POCSAGTX.h
Do the POCSAG calibration in a different way.
2019-01-30 14:31:15 +00:00
README.md
Update the README file.
2018-06-26 18:18:43 +01:00
RSSIRB.cpp
Fix Nucleo compiler issues.
2018-04-17 22:32:39 +01:00
RSSIRB.h
Removing cstddef include for better toolchain compatibility (F4 & F7 devices). Please update the Lib.
2017-09-23 12:47:43 -03:00
RingBuff.h
Added STM32F1 support to Serial module using CMSIS driver
2017-03-31 00:52:24 +02:00
STM32Utils.h
Added STM32F1 and mmdvm_pog board support to IO module using CMSIS driver
2017-03-31 00:51:50 +02:00
SampleRB.cpp
Fix Nucleo compiler issues.
2018-04-17 22:32:39 +01:00
SampleRB.h
Removing cstddef include for better toolchain compatibility (F4 & F7 devices). Please update the Lib.
2017-09-23 12:47:43 -03:00
SerialArduino.cpp
Revert "Merge pull request #204 from shawnchain/support_udid"
2019-06-04 10:12:53 +01:00
SerialPort.cpp
Merge branch 'FM' into boxcar_dstar_correlator_fm
2020-05-21 10:59:11 +01:00
SerialPort.h
Beginnings of FM controller support.
2020-04-11 22:08:17 +01:00
SerialRB.cpp
Fix Nucleo compiler issues.
2018-04-17 22:32:39 +01:00
SerialRB.h
Restore ring buffer default size
2018-10-07 21:10:34 -03:00
SerialSTM.cpp
Fix serial no write bug on DRCC board
2020-05-18 12:18:17 +08:00
SerialSTM_CMSIS.cpp
Revert "Merge pull request #204 from shawnchain/support_udid"
2019-06-04 10:12:53 +01:00
Utils.cpp
Initial commit
2016-01-14 18:57:21 +00:00
Utils.h
Removing cstddef include for better toolchain compatibility (F4 & F7 devices). Please update the Lib.
2017-09-23 12:47:43 -03:00
YSFDefines.h
Add new interpolation for most modes and start positioning for P25 and YSF.
2017-02-06 21:02:45 +00:00
YSFRX.cpp
Re-add the const qualifiers.
2017-08-18 11:04:06 +01:00
YSFRX.h
Remove compiler warning.
2017-08-29 08:37:48 +01:00
YSFTX.cpp
Fix the TX Hang handling.
2020-05-20 15:16:12 +01:00
YSFTX.h
Add YSF TX hang.
2018-06-04 20:50:43 +01:00
mmdvmmenu.sh
Rename MODE_PINS to MODE_LEDS
2018-08-01 21:09:57 +02:00
openocd.cfg
Added Makefile for STM32F1 with CMSIS
2017-03-31 00:52:24 +02:00
stm32f4xx_link.ld
New linker script file for SMT32F4XX, some minor changes on Makefile
2016-11-13 17:52:01 -03:00
stm32f722_link.ld
Separating linker script for F722 and F767
2017-11-04 15:28:38 -03:00
stm32f767_link.ld
Separating linker script for F722 and F767
2017-11-04 15:28:38 -03:00
5ef05cb6c0