Merge branch 'master' into mqtt

Added option to configure Serial Repeater baud rate

.gitmodules

@@ -4,6 +4,3 @@
 [submodule "STM32F7XX_Lib"]
 	path = STM32F7XX_Lib
 	url = https://github.com/juribeparada/STM32F7XX_Lib.git
-[submodule "STM32F10X_Lib"]
-	path = STM32F10X_Lib
-	url = https://github.com/shawnchain/STM32F10X_Lib.git

AX25Demodulator.cpp

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2020 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2020,2023 by Jonathan Naylor G4KLX
  *   Copyright 2015-2019 Mobilinkd LLC <[email protected]>
  *
  *   This program is free software; you can redistribute it and/or modify
@@ -85,7 +85,9 @@ m_hdlcOnes(0U),
 m_hdlcFlag(false),
 m_hdlcBuffer(0U),
 m_hdlcBits(0U),
-m_hdlcState(AX25_IDLE)
+m_hdlcState(AX25_IDLE),
+m_rssiAccum(0U),
+m_rssiCount(0U)
 {
   m_delayLine = new bool[DELAY_LEN];
 
@@ -101,7 +103,7 @@ m_hdlcState(AX25_IDLE)
     m_iirHistory[i] = 0.0F;
 }
 
-bool CAX25Demodulator::process(q15_t* samples, uint8_t length, CAX25Frame& frame)
+bool CAX25Demodulator::process(q15_t* samples, const uint16_t* rssi, uint8_t length, CAX25Frame& frame)
 {
   bool result = false;
 
@@ -119,6 +121,9 @@ bool CAX25Demodulator::process(q15_t* samples, uint8_t length, CAX25Frame& frame
   ::arm_fir_fast_q15(&m_lpfFilter, buffer, fc, RX_BLOCK_SIZE);
 
   for (uint8_t i = 0; i < length; i++) {
+    m_rssiAccum += rssi[i];
+    m_rssiCount++;
+
     bool bit = fc[i] >= 0;
     bool sample = PLL(bit);
 
@@ -266,6 +271,8 @@ bool CAX25Demodulator::HDLC(bool b)
         // Start of frame data.
         m_hdlcState = AX25_RECEIVE;
         m_frame.append(m_hdlcBuffer);
+        m_rssiAccum = 0U;
+        m_rssiCount = 0U;
         m_hdlcBits = 0U;
       }
       break;
@@ -315,5 +322,19 @@ float32_t CAX25Demodulator::iir(float32_t input)
   return result;
 }
 
+uint16_t CAX25Demodulator::getRSSI()
+{
+  if (m_rssiCount > 0U) {
+    uint16_t rssi = m_rssiAccum / m_rssiCount;
+
+    m_rssiAccum = 0U;
+    m_rssiCount = 0U;
+
+    return rssi;
+  }
+
+  return 0U;
+}
+
 #endif
 

AX25Demodulator.h

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2020 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2020,2023 by Jonathan Naylor G4KLX
  *
  *   This program is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by
@@ -36,12 +36,14 @@ class CAX25Demodulator {
 public:
   CAX25Demodulator(int8_t n);
 
-  bool process(q15_t* samples, uint8_t length, CAX25Frame& frame);
+  bool process(q15_t* samples, const uint16_t* rssi, uint8_t length, CAX25Frame& frame);
 
   void setTwist(int8_t n);
 
   bool isDCD();
 
+  uint16_t getRSSI();
+
 private:
   CAX25Frame           m_frame;
   CAX25Twist           m_twist;
@@ -63,6 +65,8 @@ private:
   uint16_t             m_hdlcBuffer;
   uint16_t             m_hdlcBits;
   AX25_STATE           m_hdlcState;
+  uint32_t             m_rssiAccum;
+  uint16_t             m_rssiCount;
 
   bool delay(bool b);
   bool NRZI(bool b);

AX25RX.cpp

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2020 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2020,2023 by Jonathan Naylor G4KLX
  *
  *   This program is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by
@@ -86,7 +86,7 @@ m_c(0xF6U)
   initRand();
 }
 
-void CAX25RX::samples(q15_t* samples, uint8_t length)
+void CAX25RX::samples(q15_t* samples, const uint16_t* rssi, uint8_t length)
 {
   q15_t output[RX_BLOCK_SIZE];
   ::arm_fir_fast_q15(&m_filter, samples, output, RX_BLOCK_SIZE);
@@ -95,32 +95,56 @@ void CAX25RX::samples(q15_t* samples, uint8_t length)
 
   CAX25Frame frame;
 
-  bool ret = m_demod1.process(output, length, frame);
+  bool ret = m_demod1.process(output, rssi, length, frame);
   if (ret) {
     if (frame.m_fcs != m_lastFCS || m_count > 2U) {
       m_lastFCS = frame.m_fcs;
       m_count   = 0U;
+#if defined(SEND_RSSI_DATA)
+      uint16_t rssi = m_demod1.getRSSI();
+      if (rssi > 0U)
+        serial.writeAX25DataEx(rssi, frame.m_data, frame.m_length - 2U);
+      else
+        serial.writeAX25Data(frame.m_data, frame.m_length - 2U);
+#else
       serial.writeAX25Data(frame.m_data, frame.m_length - 2U);
+#endif
     }
     DEBUG1("Decoder 1 reported");
   }
 
-  ret = m_demod2.process(output, length, frame);
+  ret = m_demod2.process(output, rssi, length, frame);
   if (ret) {
     if (frame.m_fcs != m_lastFCS || m_count > 2U) {
       m_lastFCS = frame.m_fcs;
       m_count   = 0U;
+#if defined(SEND_RSSI_DATA)
+      uint16_t rssi = m_demod2.getRSSI();
+      if (rssi > 0U)
+        serial.writeAX25DataEx(rssi, frame.m_data, frame.m_length - 2U);
+      else
+        serial.writeAX25Data(frame.m_data, frame.m_length - 2U);
+#else
       serial.writeAX25Data(frame.m_data, frame.m_length - 2U);
+#endif
     }
     DEBUG1("Decoder 2 reported");
   }
 
-  ret = m_demod3.process(output, length, frame);
+  ret = m_demod3.process(output, rssi, length, frame);
   if (ret) {
     if (frame.m_fcs != m_lastFCS || m_count > 2U) {
       m_lastFCS = frame.m_fcs;
       m_count   = 0U;
+#if defined(SEND_RSSI_DATA)
+      uint16_t rssi = m_demod3.getRSSI();
+      if (rssi > 0U)
+        serial.writeAX25DataEx(rssi, frame.m_data, frame.m_length - 2U);
+      else
+        serial.writeAX25Data(frame.m_data, frame.m_length - 2U);
+#else
       serial.writeAX25Data(frame.m_data, frame.m_length - 2U);
+#endif
     }
     DEBUG1("Decoder 3 reported");
   }

AX25RX.h

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2020 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2020,2023 by Jonathan Naylor G4KLX
  *
  *   This program is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by
@@ -29,7 +29,7 @@ class CAX25RX {
 public:
   CAX25RX();
 
-  void samples(q15_t* samples, uint8_t length);
+  void samples(q15_t* samples, const uint16_t* rssi, uint8_t length);
 
   void setParams(int8_t twist, uint8_t slotTime, uint8_t pPersist);
 

AX25TX.cpp

@@ -160,7 +160,7 @@ void CAX25TX::writeBit(bool b)
       m_tablePtr += 11U;
     }
 
-    buffer[i] = value;
+    buffer[i] = value >> 1;
 
     if (m_tablePtr >= AUDIO_TABLE_LEN)
       m_tablePtr -= AUDIO_TABLE_LEN;

CalM17.cpp

@@ -0,0 +1,66 @@
+/*
+ *   Copyright (C) 2009-2015,2020,2021 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2016 by Colin Durbridge G4EML
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "Config.h"
+
+#if defined(MODE_M17)
+
+#include "Globals.h"
+#include "CalM17.h"
+#include "M17Defines.h"
+
+const uint8_t PREAMBLE[] = {0x00U,
+	0x77U, 0x77U, 0x77U, 0x77U, 0x77U, 0x77U, 0x77U, 0x77U,
+	0x77U, 0x77U, 0x77U, 0x77U, 0x77U, 0x77U, 0x77U, 0x77U,
+	0x77U, 0x77U, 0x77U, 0x77U, 0x77U, 0x77U, 0x77U, 0x77U,
+	0x77U, 0x77U, 0x77U, 0x77U, 0x77U, 0x77U, 0x77U, 0x77U,
+	0x77U, 0x77U, 0x77U, 0x77U, 0x77U, 0x77U, 0x77U, 0x77U,
+	0x77U, 0x77U, 0x77U, 0x77U, 0x77U, 0x77U, 0x77U, 0x77U};
+
+CCalM17::CCalM17() :
+m_transmit(false)
+{
+}
+
+void CCalM17::process()
+{
+  m17TX.process();
+
+  if (!m_transmit)
+    return;
+
+  uint16_t space = m17TX.getSpace();
+  if (space < 2U)
+    return;
+
+  m17TX.writeData(PREAMBLE, M17_FRAME_LENGTH_BYTES + 1U);
+}
+
+uint8_t CCalM17::write(const uint8_t* data, uint16_t length)
+{
+  if (length != 1U)
+    return 4U;
+
+  m_transmit = data[0U] == 1U;
+
+  return 0U;
+}
+
+#endif
+

CalM17.h

@@ -0,0 +1,43 @@
+/*
+ *   Copyright (C) 2009-2015,2020,2021 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2016 by Colin Durbridge G4EML
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "Config.h"
+
+#if defined(MODE_M17)
+
+#if !defined(CALM17_H)
+#define  CALM17_H
+
+
+class CCalM17 {
+public:
+  CCalM17();
+
+  void process();
+
+  uint8_t write(const uint8_t* data, uint16_t length);
+
+private:
+  bool m_transmit;
+};
+
+#endif
+
+#endif
+

Config.h

@@ -20,7 +20,7 @@
 #define  CONFIG_H
 
 // Allow for the selection of which modes to compile into the firmware. This is particularly useful for processors
-// which have limited code space and processing power like the STM32F103, which is found on older/cheaper boards.
+// which have limited code space and processing power.
 
 // Enable D-Star support.
 #define MODE_DSTAR
@@ -67,12 +67,10 @@
 // #define EXTERNAL_OSC 19200000
 
 // Select a baud rate for host communication. The faster speeds are needed for external FM to work.
-// #define SERIAL_SPEED 115200 // Suitable for most older boards (Arduino Due, STM32F1_POG, etc). External FM will NOT work with this!
+// #define SERIAL_SPEED 115200 // Suitable for most older boards (Arduino Due, etc). External FM will NOT work with this!
 // #define SERIAL_SPEED 230400 // Only works on newer boards like fast M4, M7, Teensy 3.x. External FM might work with this
 #define SERIAL_SPEED 460800	// Only works on newer boards like fast M4, M7, Teensy 3.x. External FM should work with this
-
-// Allow the use of the COS line to lockout the modem
-// #define USE_COS_AS_LOCKOUT
+//#define SERIAL_SPEED 500000  // Used with newer boards and Armbian on AllWinner SOCs (H2, H3) that do not support 460800
 
 // Use pins to output the current mode via LEDs
 #define MODE_LEDS
@@ -80,13 +78,8 @@
 // For the original Arduino Due pin layout
 // #define ARDUINO_DUE_PAPA
 
-#if defined(STM32F1)
-// For the SQ6POG board
-#define STM32F1_POG
-#else
 // For the ZUM V1.0 and V1.0.1 boards pin layout
 // #define ARDUINO_DUE_ZUM_V10
-#endif
 
 // For the SP8NTH board
 // #define ARDUINO_DUE_NTH
@@ -107,6 +100,9 @@
 // Use the modem as a serial repeater for Nextion displays
 #define SERIAL_REPEATER
 
+// Set the baud rate of the modem serial repeater for Nextion displays
+#define SERIAL_REPEATER_BAUD_RATE 9600
+
 // Use the modem as an I2C repeater for OLED displays
 // #define I2C_REPEATER
 
@@ -129,11 +125,5 @@
 // Use the D-Star and YSF LEDs for FM
 #define USE_ALTERNATE_FM_LEDS
 
-#if defined(STM32F1_POG)
-// Slower boards need to run their serial at 115200 baud
-#undef SERIAL_SPEED
-#define SERIAL_SPEED 115200
-#endif
-
 #endif
 

FM.cpp

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2020,2021 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2020,2021,2023 by Jonathan Naylor G4KLX
  *
  *   This program is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by
@@ -28,6 +28,19 @@ const uint16_t FM_SERIAL_BLOCK_SIZE = 80U;//this is the number of sample pairs t
                                           //three times this value shall never exceed 252
 const uint16_t FM_SERIAL_BLOCK_SIZE_BYTES = FM_SERIAL_BLOCK_SIZE * 3U;
 
+const uint8_t FS_LISTENING         = 0U;
+const uint8_t FS_KERCHUNK_RF       = 1U;
+const uint8_t FS_RELAYING_RF       = 2U;
+const uint8_t FS_RELAYING_WAIT_RF  = 3U;
+const uint8_t FS_TIMEOUT_RF        = 4U;
+const uint8_t FS_TIMEOUT_WAIT_RF   = 5U;
+const uint8_t FS_KERCHUNK_EXT      = 6U;
+const uint8_t FS_RELAYING_EXT      = 7U;
+const uint8_t FS_RELAYING_WAIT_EXT = 8U;
+const uint8_t FS_TIMEOUT_EXT       = 9U;
+const uint8_t FS_TIMEOUT_WAIT_EXT  = 10U;
+const uint8_t FS_HANG              = 11U;
+
 
 CFM::CFM() :
 m_callsign(),
@@ -48,7 +61,6 @@ m_kerchunkTimer(),
 m_ackMinTimer(),
 m_ackDelayTimer(),
 m_hangTimer(),
-m_statusTimer(),
 m_reverseTimer(),
 m_needReverse(false),
 m_filterStage1(  724,   1448,   724, 32768, -37895, 21352),//3rd order Cheby Filter 300 to 2700Hz, 0.2dB passband ripple, sampling rate 24kHz
@@ -68,15 +80,168 @@ m_inputRFRB(2401U),   // 100ms of audio + 1 sample
 m_outputRFRB(2400U),  // 100ms of audio
 m_inputExtRB(),
 m_rfSignal(false),
-m_extSignal(false)
+m_extSignal(false),
+m_rssiAccum(0U),
+m_rssiCount(0U)
 {
-  m_statusTimer.setTimeout(1U, 0U);
   m_reverseTimer.setTimeout(0U, 150U);
 
   insertDelay(100U);
 }
 
-void CFM::samples(bool cos, q15_t* samples, uint8_t length)
+void CFM::samples(bool cos, q15_t* samples, const uint16_t* rssi, uint8_t length)
+{
+  if (m_linkMode)
+    linkSamples(cos, samples, length);
+  else
+    repeaterSamples(cos, samples, rssi, length);
+}
+
+void CFM::repeaterSamples(bool cos, q15_t* samples, const uint16_t* rssi, uint8_t length)
+{
+  if (m_cosInvert)
+    cos = !cos;
+
+  clock(length);
+
+  uint8_t i = 0U;
+  for (; i < length; i++) {
+    if (m_state == FS_RELAYING_RF) {
+      m_rssiAccum += rssi[i];
+      m_rssiCount++;
+    }
+
+    // ARMv7-M has hardware integer division 
+    q15_t currentRFSample = q15_t((q31_t(samples[i]) << 8) / m_rxLevel);
+
+    if (m_noiseSquelch)
+      cos = m_squelch.process(currentRFSample);
+
+    q15_t currentExtSample;
+    bool inputExt = m_inputExtRB.getSample(currentExtSample);//always consume the external input data so it does not overflow
+    inputExt = inputExt && m_extEnabled;
+
+    switch (m_accessMode) {
+      case 0U:
+        if (!inputExt && !cos && m_modemState != STATE_FM)
+          continue;
+        else
+          stateMachine(cos, inputExt);
+        break;
+
+      case 1U: {
+          bool ctcss = m_ctcssRX.process(currentRFSample);
+
+          // Delay the audio by 100ms to better match the CTCSS detector output
+          m_inputRFRB.put(currentRFSample);
+          m_inputRFRB.get(currentRFSample);
+
+          if (!inputExt && !ctcss && m_modemState != STATE_FM) {
+            // No CTCSS detected, just carry on
+            continue;
+          } else if ((inputExt || ctcss) && m_modemState != STATE_FM) {
+            // We had CTCSS or external input
+            stateMachine(ctcss, inputExt);
+            if (m_state == FS_LISTENING)
+              continue;
+          } else {
+            stateMachine(ctcss, inputExt);
+          }
+        }
+        break;
+
+      case 2U: {
+          bool ctcss = m_ctcssRX.process(currentRFSample);
+          if (!inputExt && !ctcss && m_modemState != STATE_FM) {
+            // No CTCSS detected, just carry on
+            continue;
+          } else if ((inputExt || (ctcss && cos)) && m_modemState != STATE_FM) {
+            // We had CTCSS or external input
+            stateMachine(ctcss && cos, inputExt);
+            if (m_state == FS_LISTENING)
+              continue;
+          } else {
+            stateMachine(ctcss && cos, inputExt);
+          }
+        }
+        break;
+
+      default: {
+          bool ctcss = m_ctcssRX.process(currentRFSample);
+          if (!inputExt && !ctcss && m_modemState != STATE_FM) {
+            // No CTCSS detected, just carry on
+            continue;
+          } else if ((inputExt || (ctcss && cos)) && m_modemState != STATE_FM) {
+            // We had CTCSS or external input
+            stateMachine(ctcss && cos, inputExt);
+            if (m_state == FS_LISTENING)
+              continue;
+          } else {
+            stateMachine(cos, inputExt);
+          }
+        }
+        break;
+    }
+
+    if (m_modemState != STATE_FM)
+      continue;
+
+    if (m_state == FS_LISTENING && !m_rfAck.isWanted() && !m_extAck.isWanted() && !m_callsign.isWanted() && !m_reverseTimer.isRunning())
+      continue;
+
+    q15_t currentSample = currentRFSample;
+    q15_t currentBoost  = m_rfAudioBoost;
+    if (m_state == FS_RELAYING_EXT || m_state == FS_KERCHUNK_EXT) {
+      currentSample = currentExtSample;
+      currentBoost  = m_extAudioBoost;
+    }
+
+    // Only let RF audio through when relaying RF audio
+    if (m_duplex) {
+      if (m_state == FS_RELAYING_RF || m_state == FS_KERCHUNK_RF || m_state == FS_RELAYING_EXT || m_state == FS_KERCHUNK_EXT) {
+        currentSample = m_blanking.process(currentSample);
+        if (m_extEnabled && (m_state == FS_RELAYING_RF || m_state == FS_KERCHUNK_RF))
+          m_downSampler.addSample(currentSample);
+
+        currentSample *= currentBoost;
+      } else {
+        currentSample = 0;
+      }
+    } else {
+        if (m_state == FS_RELAYING_EXT || m_state == FS_KERCHUNK_EXT) {
+          currentSample *= currentBoost;
+        } else {
+          if (m_extEnabled && (m_state == FS_RELAYING_RF || m_state == FS_KERCHUNK_RF))
+            m_downSampler.addSample(currentSample);
+          continue; 
+        }
+    }
+
+    if (!m_callsign.isRunning() && !m_extAck.isRunning())
+      currentSample += m_rfAck.getHighAudio();
+
+    if (!m_callsign.isRunning() && !m_rfAck.isRunning())
+      currentSample += m_extAck.getHighAudio();
+
+    if (!m_rfAck.isRunning() && !m_extAck.isRunning()) {
+      if (m_state == FS_LISTENING)
+        currentSample += m_callsign.getHighAudio();
+      else
+        currentSample += m_callsign.getLowAudio();
+    }
+
+    currentSample = m_filterStage3.filter(m_filterStage2.filter(m_filterStage1.filter(currentSample)));
+
+    if (!m_callsign.isRunning() && !m_rfAck.isRunning() && !m_extAck.isRunning())
+      currentSample += m_timeoutTone.getAudio();
+
+    currentSample += m_ctcssTX.getAudio(m_reverseTimer.isRunning());
+
+    m_outputRFRB.put(currentSample);
+  }
+}
+
+void CFM::linkSamples(bool cos, q15_t* samples, uint8_t length)
 {
   if (m_cosInvert)
     cos = !cos;
@@ -160,70 +325,18 @@ void CFM::samples(bool cos, q15_t* samples, uint8_t length)
     if (m_modemState != STATE_FM)
       continue;
 
-    q15_t currentSample;
-
-    if (m_linkMode) {
-      if (m_rfSignal && m_extEnabled) {
-        q15_t currentSample = m_blanking.process(currentRFSample);
-        m_downSampler.addSample(currentSample);
-      }
-
-      if (m_extSignal)
-        currentSample = currentExtSample * m_extAudioBoost;
-
-      if (!m_extSignal)
-        continue;
-    } else {
-      if (m_state == FS_LISTENING && !m_rfAck.isWanted() && !m_extAck.isWanted() && !m_callsign.isWanted() && !m_reverseTimer.isRunning())
-        continue;
-
-      q15_t currentSample = currentRFSample;
-      q15_t currentBoost  = m_rfAudioBoost;
-      if (m_state == FS_RELAYING_EXT || m_state == FS_KERCHUNK_EXT) {
-        currentSample = currentExtSample;
-        currentBoost  = m_extAudioBoost;
-      }
-
-      // Only let RF audio through when relaying RF audio
-      if (m_duplex) {
-        if (m_state == FS_RELAYING_RF || m_state == FS_KERCHUNK_RF || m_state == FS_RELAYING_EXT || m_state == FS_KERCHUNK_EXT) {
-          currentSample = m_blanking.process(currentSample);
-          if (m_extEnabled && (m_state == FS_RELAYING_RF || m_state == FS_KERCHUNK_RF))
-            m_downSampler.addSample(currentSample);
-
-          currentSample *= currentBoost;
-        } else {
-          currentSample = 0;
-        }
-      } else {
-        if (m_state == FS_RELAYING_EXT || m_state == FS_KERCHUNK_EXT) {
-          currentSample *= currentBoost;
-        } else {
-          if (m_extEnabled && (m_state == FS_RELAYING_RF || m_state == FS_KERCHUNK_RF))
-            m_downSampler.addSample(currentSample);
-          continue; 
-        }
-      }
+    if (m_rfSignal && m_extEnabled) {
+      q15_t currentSample = m_blanking.process(currentRFSample);
+      m_downSampler.addSample(currentSample);
     }
 
-    if (!m_callsign.isRunning() && !m_extAck.isRunning())
-      currentSample += m_rfAck.getHighAudio();
+    if (!m_extSignal)
+      continue;
 
-    if (!m_callsign.isRunning() && !m_rfAck.isRunning())
-      currentSample += m_extAck.getHighAudio();
-
-    if (!m_rfAck.isRunning() && !m_extAck.isRunning()) {
-      if (m_state == FS_LISTENING)
-        currentSample += m_callsign.getHighAudio();
-      else
-        currentSample += m_callsign.getLowAudio();
-    }
+    q15_t currentSample = currentExtSample * m_extAudioBoost;
 
     currentSample = m_filterStage3.filter(m_filterStage2.filter(m_filterStage1.filter(currentSample)));
 
-    if (!m_callsign.isRunning() && !m_rfAck.isRunning() && !m_extAck.isRunning())
-      currentSample += m_timeoutTone.getAudio();
-
     currentSample += m_ctcssTX.getAudio(m_reverseTimer.isRunning());
 
     m_outputRFRB.put(currentSample);
@@ -282,7 +395,6 @@ void CFM::reset()
   m_ackMinTimer.stop();
   m_ackDelayTimer.stop();
   m_hangTimer.stop();
-  m_statusTimer.stop();
   m_reverseTimer.stop();
 
   m_ctcssRX.reset();
@@ -488,13 +600,7 @@ void CFM::clock(uint8_t length)
   m_ackMinTimer.clock(length);
   m_ackDelayTimer.clock(length);
   m_hangTimer.clock(length);
-  m_statusTimer.clock(length);
   m_reverseTimer.clock(length);
-
-  if (m_statusTimer.isRunning() && m_statusTimer.hasExpired()) {
-    serial.writeFMStatus(m_state);
-    m_statusTimer.start();
-  }
 }
 
 void CFM::listeningStateDuplex(bool validRFSignal, bool validExtSignal)
@@ -503,12 +609,19 @@ void CFM::listeningStateDuplex(bool validRFSignal, bool validExtSignal)
     if (m_kerchunkTimer.getTimeout() > 0U) {
       DEBUG1("State to KERCHUNK_RF");
       m_state = FS_KERCHUNK_RF;
+      serial.writeFMStatus(m_state);
+
       m_kerchunkTimer.start();
       if (m_callsignAtStart && !m_callsignAtLatch)
         sendCallsign();
     } else {
       DEBUG1("State to RELAYING_RF");
       m_state = FS_RELAYING_RF;
+      serial.writeFMStatus(m_state);
+
+      m_rssiAccum = 0U;
+      m_rssiCount = 0U;
+
       if (m_callsignAtStart)
         sendCallsign();
     }
@@ -523,20 +636,21 @@ void CFM::listeningStateDuplex(bool validRFSignal, bool validExtSignal)
 
       io.setDecode(true);
       io.setADCDetection(true);
-
-      m_statusTimer.start();
-      serial.writeFMStatus(m_state);
     }
   } else if (validExtSignal) {
     if (m_kerchunkTimer.getTimeout() > 0U) {
       DEBUG1("State to KERCHUNK_EXT");
       m_state = FS_KERCHUNK_EXT;
+      serial.writeFMStatus(m_state);
+
       m_kerchunkTimer.start();
       if (m_callsignAtStart && !m_callsignAtLatch)
         sendCallsign();
     } else {
       DEBUG1("State to RELAYING_EXT");
       m_state = FS_RELAYING_EXT;
+      serial.writeFMStatus(m_state);
+
       if (m_callsignAtStart)
         sendCallsign();
     }
@@ -548,9 +662,6 @@ void CFM::listeningStateDuplex(bool validRFSignal, bool validExtSignal)
 
       m_callsignTimer.start();
       m_reverseTimer.stop();
-
-      m_statusTimer.start();
-      serial.writeFMStatus(m_state);
     }
   }
 }
@@ -560,26 +671,22 @@ void CFM::listeningStateSimplex(bool validRFSignal, bool validExtSignal)
   if (validRFSignal) {
     DEBUG1("State to RELAYING_RF");
     m_state = FS_RELAYING_RF;
+    serial.writeFMStatus(m_state);
 
     io.setDecode(true);
     io.setADCDetection(true);
 
     m_timeoutTimer.start();
     m_reverseTimer.stop();
-
-    m_statusTimer.start();
-    serial.writeFMStatus(m_state);
   } else if (validExtSignal) {
     DEBUG1("State to RELAYING_EXT");
     m_state = FS_RELAYING_EXT;
+    serial.writeFMStatus(m_state);
 
     insertSilence(50U);
 
     m_timeoutTimer.start();
     m_reverseTimer.stop();
-
-    m_statusTimer.start();
-    serial.writeFMStatus(m_state);
   }
 }
 
@@ -589,6 +696,11 @@ void CFM::kerchunkRFStateDuplex(bool validSignal)
     if (m_kerchunkTimer.hasExpired()) {
       DEBUG1("State to RELAYING_RF");
       m_state = FS_RELAYING_RF;
+      serial.writeFMStatus(m_state);
+
+      m_rssiAccum = 0U;
+      m_rssiCount = 0U;
+
       m_kerchunkTimer.stop();
       if (m_callsignAtStart && m_callsignAtLatch) {
         sendCallsign();
@@ -601,11 +713,12 @@ void CFM::kerchunkRFStateDuplex(bool validSignal)
 
     DEBUG1("State to LISTENING");
     m_state = FS_LISTENING;
+    serial.writeFMStatus(m_state);
+
     m_kerchunkTimer.stop();
     m_timeoutTimer.stop();
     m_ackMinTimer.stop();
     m_callsignTimer.stop();
-    m_statusTimer.stop();
     m_needReverse = true;
     if (m_extEnabled)
       serial.writeFMEOT();
@@ -615,9 +728,21 @@ void CFM::kerchunkRFStateDuplex(bool validSignal)
 void CFM::relayingRFStateDuplex(bool validSignal)
 {
   if (validSignal) {
+#if defined(SEND_RSSI_DATA)
+    if (m_rssiCount >= 24000U) {
+      uint16_t rssi = m_rssiAccum / m_rssiCount;
+      serial.writeFMRSSI(rssi);
+
+      m_rssiAccum = 0U;
+      m_rssiCount = 0U;
+    }
+#endif
+
     if (m_timeoutTimer.isRunning() && m_timeoutTimer.hasExpired()) {
       DEBUG1("State to TIMEOUT_RF");
       m_state = FS_TIMEOUT_RF;
+      serial.writeFMStatus(m_state);
+
       m_ackMinTimer.stop();
       m_timeoutTimer.stop();
       m_timeoutTone.start();
@@ -631,6 +756,8 @@ void CFM::relayingRFStateDuplex(bool validSignal)
 
     DEBUG1("State to RELAYING_WAIT_RF");
     m_state = FS_RELAYING_WAIT_RF;
+    serial.writeFMStatus(m_state);
+
     m_ackDelayTimer.start();
 
     if (m_extEnabled)
@@ -649,6 +776,7 @@ void CFM::relayingRFStateSimplex(bool validSignal)
     if (m_timeoutTimer.isRunning() && m_timeoutTimer.hasExpired()) {
       DEBUG1("State to TIMEOUT_RF");
       m_state = FS_TIMEOUT_RF;
+      serial.writeFMStatus(m_state);
 
       m_timeoutTimer.stop();
 
@@ -661,6 +789,8 @@ void CFM::relayingRFStateSimplex(bool validSignal)
 
     DEBUG1("State to RELAYING_WAIT_RF");
     m_state = FS_RELAYING_WAIT_RF;
+    serial.writeFMStatus(m_state);
+
     m_ackDelayTimer.start();
 
     if (m_extEnabled)
@@ -676,11 +806,17 @@ void CFM::relayingRFWaitStateDuplex(bool validSignal)
 
     DEBUG1("State to RELAYING_RF");
     m_state = FS_RELAYING_RF;
+    serial.writeFMStatus(m_state);
+
+    m_rssiAccum = 0U;
+    m_rssiCount = 0U;
+
     m_ackDelayTimer.stop();
   } else {
     if (m_ackDelayTimer.isRunning() && m_ackDelayTimer.hasExpired()) {
       DEBUG1("State to HANG");
       m_state = FS_HANG;
+      serial.writeFMStatus(m_state);
 
       if (m_ackMinTimer.isRunning()) {
         if (m_ackMinTimer.hasExpired()) {
@@ -714,11 +850,15 @@ void CFM::relayingRFWaitStateSimplex(bool validSignal)
 
     DEBUG1("State to RELAYING_RF");
     m_state = FS_RELAYING_RF;
+    serial.writeFMStatus(m_state);
+
     m_ackDelayTimer.stop();
   } else {
     if (m_ackDelayTimer.isRunning() && m_ackDelayTimer.hasExpired()) {
       DEBUG1("State to LISTENING");
       m_state = FS_LISTENING;
+      serial.writeFMStatus(m_state);
+
       m_ackDelayTimer.stop();
       m_timeoutTimer.stop();
     }
@@ -731,6 +871,8 @@ void CFM::kerchunkExtStateDuplex(bool validSignal)
     if (m_kerchunkTimer.hasExpired()) {
       DEBUG1("State to RELAYING_EXT");
       m_state = FS_RELAYING_EXT;
+      serial.writeFMStatus(m_state);
+
       m_kerchunkTimer.stop();
       if (m_callsignAtStart && m_callsignAtLatch) {
         sendCallsign();
@@ -740,11 +882,12 @@ void CFM::kerchunkExtStateDuplex(bool validSignal)
   } else {
     DEBUG1("State to LISTENING");
     m_state = FS_LISTENING;
+    serial.writeFMStatus(m_state);
+
     m_kerchunkTimer.stop();
     m_timeoutTimer.stop();
     m_ackMinTimer.stop();
     m_callsignTimer.stop();
-    m_statusTimer.stop();
     m_needReverse = true;
   }
 }
@@ -755,6 +898,8 @@ void CFM::relayingExtStateDuplex(bool validSignal)
     if (m_timeoutTimer.isRunning() && m_timeoutTimer.hasExpired()) {
       DEBUG1("State to TIMEOUT_EXT");
       m_state = FS_TIMEOUT_EXT;
+      serial.writeFMStatus(m_state);
+
       m_ackMinTimer.stop();
       m_timeoutTimer.stop();
       m_timeoutTone.start();
@@ -762,6 +907,7 @@ void CFM::relayingExtStateDuplex(bool validSignal)
   } else {
     DEBUG1("State to RELAYING_WAIT_EXT");
     m_state = FS_RELAYING_WAIT_EXT;
+    serial.writeFMStatus(m_state);
     m_ackDelayTimer.start();
   }
 
@@ -777,12 +923,14 @@ void CFM::relayingExtStateSimplex(bool validSignal)
     if (m_timeoutTimer.isRunning() && m_timeoutTimer.hasExpired()) {
       DEBUG1("State to TIMEOUT_EXT");
       m_state = FS_TIMEOUT_EXT;
+      serial.writeFMStatus(m_state);
 
       m_timeoutTimer.stop();
     }
   } else {
     DEBUG1("State to RELAYING_WAIT_EXT");
     m_state = FS_RELAYING_WAIT_EXT;
+    serial.writeFMStatus(m_state);
     m_ackDelayTimer.start();
   }
 }
@@ -792,11 +940,13 @@ void CFM::relayingExtWaitStateDuplex(bool validSignal)
   if (validSignal) {
     DEBUG1("State to RELAYING_EXT");
     m_state = FS_RELAYING_EXT;
+    serial.writeFMStatus(m_state);
     m_ackDelayTimer.stop();
   } else {
     if (m_ackDelayTimer.isRunning() && m_ackDelayTimer.hasExpired()) {
       DEBUG1("State to HANG");
       m_state = FS_HANG;
+      serial.writeFMStatus(m_state);
 
       if (m_ackMinTimer.isRunning()) {
         if (m_ackMinTimer.hasExpired()) {
@@ -827,11 +977,14 @@ void CFM::relayingExtWaitStateSimplex(bool validSignal)
   if (validSignal) {
     DEBUG1("State to RELAYING_EXT");
     m_state = FS_RELAYING_EXT;
+    serial.writeFMStatus(m_state);
     m_ackDelayTimer.stop();
   } else {
     if (m_ackDelayTimer.isRunning() && m_ackDelayTimer.hasExpired()) {
       DEBUG1("State to LISTENING");
       m_state = FS_LISTENING;
+      serial.writeFMStatus(m_state);
+
       m_ackDelayTimer.stop();
       m_timeoutTimer.stop();
       m_needReverse = true;
@@ -847,6 +1000,11 @@ void CFM::hangStateDuplex(bool validRFSignal, bool validExtSignal)
 
     DEBUG1("State to RELAYING_RF");
     m_state = FS_RELAYING_RF;
+    serial.writeFMStatus(m_state);
+
+    m_rssiAccum = 0U;
+    m_rssiCount = 0U;
+
     DEBUG1("Stop ack");
     m_rfAck.stop();
     m_extAck.stop();
@@ -854,6 +1012,8 @@ void CFM::hangStateDuplex(bool validRFSignal, bool validExtSignal)
   } else if (validExtSignal) {
     DEBUG1("State to RELAYING_EXT");
     m_state = FS_RELAYING_EXT;
+    serial.writeFMStatus(m_state);
+
     DEBUG1("Stop ack");
     m_rfAck.stop();
     m_extAck.stop();
@@ -862,8 +1022,9 @@ void CFM::hangStateDuplex(bool validRFSignal, bool validExtSignal)
     if (m_hangTimer.isRunning() && m_hangTimer.hasExpired()) {
       DEBUG1("State to LISTENING");
       m_state = FS_LISTENING;
+      serial.writeFMStatus(m_state);
+
       m_hangTimer.stop();
-      m_statusTimer.stop();
 
       if (m_callsignAtEnd)
         sendCallsign();
@@ -887,6 +1048,7 @@ void CFM::timeoutRFStateDuplex(bool validSignal)
 
     DEBUG1("State to TIMEOUT_WAIT_RF");
     m_state = FS_TIMEOUT_WAIT_RF;
+    serial.writeFMStatus(m_state);
 
     if (m_callsignAtEnd)
         sendCallsign();
@@ -908,6 +1070,7 @@ void CFM::timeoutRFStateSimplex(bool validSignal)
 
     DEBUG1("State to TIMEOUT_WAIT_RF");
     m_state = FS_TIMEOUT_WAIT_RF;
+    serial.writeFMStatus(m_state);
 
     m_ackDelayTimer.start();
   }
@@ -921,11 +1084,14 @@ void CFM::timeoutRFWaitStateDuplex(bool validSignal)
 
     DEBUG1("State to TIMEOUT_RF");
     m_state = FS_TIMEOUT_RF;
+    serial.writeFMStatus(m_state);
     m_ackDelayTimer.stop();
   } else {
     if (m_ackDelayTimer.isRunning() && m_ackDelayTimer.hasExpired()) {
       DEBUG1("State to HANG");
       m_state = FS_HANG;
+      serial.writeFMStatus(m_state);
+
       m_timeoutTone.stop();
       DEBUG1("Send RF ack");
       m_rfAck.start();
@@ -950,11 +1116,14 @@ void CFM::timeoutRFWaitStateSimplex(bool validSignal)
 
     DEBUG1("State to TIMEOUT_RF");
     m_state = FS_TIMEOUT_RF;
+    serial.writeFMStatus(m_state);
     m_ackDelayTimer.stop();
   } else {
     if (m_ackDelayTimer.isRunning() && m_ackDelayTimer.hasExpired()) {
       DEBUG1("State to LISTENING");
       m_state = FS_LISTENING;
+      serial.writeFMStatus(m_state);
+
       m_ackDelayTimer.stop();
       m_timeoutTimer.stop();
     }
@@ -966,6 +1135,7 @@ void CFM::timeoutExtStateDuplex(bool validSignal)
   if (!validSignal) {
     DEBUG1("State to TIMEOUT_WAIT_EXT");
     m_state = FS_TIMEOUT_WAIT_EXT;
+    serial.writeFMStatus(m_state);
     m_ackDelayTimer.start();
   }
 
@@ -980,6 +1150,7 @@ void CFM::timeoutExtStateSimplex(bool validSignal)
   if (!validSignal) {
     DEBUG1("State to TIMEOUT_WAIT_EXT");
     m_state = FS_TIMEOUT_WAIT_EXT;
+    serial.writeFMStatus(m_state);
     m_ackDelayTimer.start();
   }
 }
@@ -989,11 +1160,14 @@ void CFM::timeoutExtWaitStateDuplex(bool validSignal)
   if (validSignal) {
     DEBUG1("State to TIMEOUT_EXT");
     m_state = FS_TIMEOUT_EXT;
+    serial.writeFMStatus(m_state);
     m_ackDelayTimer.stop();
   } else {
     if (m_ackDelayTimer.isRunning() && m_ackDelayTimer.hasExpired()) {
       DEBUG1("State to HANG");
       m_state = FS_HANG;
+      serial.writeFMStatus(m_state);
+
       m_timeoutTone.stop();
       DEBUG1("Send Ext ack");
       m_extAck.start();
@@ -1015,11 +1189,14 @@ void CFM::timeoutExtWaitStateSimplex(bool validSignal)
   if (validSignal) {
     DEBUG1("State to TIMEOUT_EXT");
     m_state = FS_TIMEOUT_EXT;
+    serial.writeFMStatus(m_state);
     m_ackDelayTimer.stop();
   } else {
     if (m_ackDelayTimer.isRunning() && m_ackDelayTimer.hasExpired()) {
       DEBUG1("State to LISTENING");
       m_state = FS_LISTENING;
+      serial.writeFMStatus(m_state);
+
       m_ackDelayTimer.stop();
       m_timeoutTimer.stop();
       m_needReverse = true;
@@ -1036,7 +1213,6 @@ void CFM::linkStateMachine(bool validRFSignal, bool validExtSignal)
     if (!m_extSignal) {
       DEBUG1("State to RELAYING_RF");
       m_state = FS_RELAYING_RF;
-      m_statusTimer.start();
       serial.writeFMStatus(m_state);
     }
 
@@ -1047,7 +1223,6 @@ void CFM::linkStateMachine(bool validRFSignal, bool validExtSignal)
     if (!m_rfSignal) {
       DEBUG1("State to RELAYING_EXT");
       m_state = FS_RELAYING_EXT;
-      m_statusTimer.start();
       serial.writeFMStatus(m_state);
     }
 
@@ -1063,7 +1238,7 @@ void CFM::linkStateMachine(bool validRFSignal, bool validExtSignal)
     if (!m_extSignal) {
       DEBUG1("State to LISTENING");
       m_state = FS_LISTENING;
-      m_statusTimer.stop();
+      serial.writeFMStatus(m_state);
     }
 
     m_rfSignal = false;
@@ -1076,7 +1251,7 @@ void CFM::linkStateMachine(bool validRFSignal, bool validExtSignal)
     if (!m_rfSignal) {
       DEBUG1("State to LISTENING");
       m_state = FS_LISTENING;
-      m_statusTimer.stop();
+      serial.writeFMStatus(m_state);
     }
 
     m_needReverse = true;

FM.h

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2020,2021 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2020,2021,2023 by Jonathan Naylor G4KLX
  *
  *   This program is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by
@@ -35,27 +35,12 @@
 #include "FMUpSampler.h"
 #include "FMNoiseSquelch.h"
 
-enum FM_STATE {
-  FS_LISTENING,
-  FS_KERCHUNK_RF,
-  FS_RELAYING_RF,
-  FS_RELAYING_WAIT_RF,
-  FS_TIMEOUT_RF,
-  FS_TIMEOUT_WAIT_RF,
-  FS_KERCHUNK_EXT,
-  FS_RELAYING_EXT,
-  FS_RELAYING_WAIT_EXT,
-  FS_TIMEOUT_EXT,
-  FS_TIMEOUT_WAIT_EXT,
-  FS_HANG
-};
-
 
 class CFM {
 public:
   CFM();
 
-  void samples(bool cos, q15_t* samples, uint8_t length);
+  void samples(bool cos, q15_t* samples, const uint16_t* rssi, uint8_t length);
 
   void process();
 
@@ -78,7 +63,7 @@ private:
   CFMCTCSSTX           m_ctcssTX;
   CFMNoiseSquelch      m_squelch;
   CFMTimeout           m_timeoutTone;
-  FM_STATE             m_state;
+  uint8_t              m_state;
   bool                 m_callsignAtStart;
   bool                 m_callsignAtEnd;
   bool                 m_callsignAtLatch;
@@ -89,7 +74,6 @@ private:
   CFMTimer             m_ackMinTimer;
   CFMTimer             m_ackDelayTimer;
   CFMTimer             m_hangTimer;
-  CFMTimer             m_statusTimer;
   CFMTimer             m_reverseTimer;
   bool                 m_needReverse;
   CFMDirectFormI       m_filterStage1;
@@ -110,9 +94,14 @@ private:
   CFMUpSampler         m_inputExtRB;
   bool                 m_rfSignal;
   bool                 m_extSignal;
+  uint32_t             m_rssiAccum;
+  uint16_t             m_rssiCount;
 
   void stateMachine(bool validRFSignal, bool validExtSignal);
 
+  void repeaterSamples(bool cos, q15_t* samples, const uint16_t* rssi, uint8_t length);
+  void linkSamples(bool cos, q15_t* samples, uint8_t length);
+
   void duplexStateMachine(bool validRFSignal, bool validExtSignal);
   void listeningStateDuplex(bool validRFSignal, bool validExtSignal);
   void kerchunkRFStateDuplex(bool validSignal);

FMDirectForm1.h

@@ -42,8 +42,7 @@ class CFMDirectFormI
 public:
 
 	// convenience function which takes the a0 argument but ignores it!
-	CFMDirectFormI(const q31_t b0, const q31_t b1, const q31_t b2,
-			const q31_t, const q31_t a1, const q31_t a2)
+	CFMDirectFormI(const q31_t b0, const q31_t b1, const q31_t b2, const q31_t, const q31_t a1, const q31_t a2)
 	{
 		// FIR coefficients
 		c_b0 = b0;
@@ -57,21 +56,21 @@ public:
 
 	CFMDirectFormI(const CFMDirectFormI &my)
 	{
-	// delay line
+		// delay line
 		m_x2 = my.m_x2; // x[n-2]
 		m_y2 = my.m_y2; // y[n-2]
 		m_x1 = my.m_x1; // x[n-1]
 		m_y1 = my.m_y1; // y[n-1]
 
-	// coefficients
+		// coefficients
 		c_b0 = my.c_b0;
 		c_b1 = my.c_b1;
 		c_b2 = my.c_b2; // FIR
 		c_a1 = my.c_a1;
 		c_a2 = my.c_a2; // IIR
-    }
+	}
 
-	void reset ()
+	void reset()
 	{
 		m_x1 = 0;
 		m_x2 = 0;
@@ -83,11 +82,7 @@ public:
 	inline q15_t filter(const q15_t in)
 	{
 		// calculate the output
-		register q31_t out_upscaled = c_b0 * in
-									+ c_b1 * m_x1
-									+ c_b2 * m_x2
-									- c_a1 * m_y1
-									- c_a2 * m_y2;
+		q31_t out_upscaled = c_b0 * in + c_b1 * m_x1 + c_b2 * m_x2 - c_a1 * m_y1 - c_a2 * m_y2;
 
 		q15_t out = __SSAT(out_upscaled >> 15, 15);
 

Globals.h

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2015,2016,2017,2018,2020 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2015,2016,2017,2018,2020,2021 by Jonathan Naylor G4KLX
  *
  *   This program is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by
@@ -23,15 +23,12 @@
 #include "stm32f4xx.h"
 #elif defined(STM32F7XX)
 #include "stm32f7xx.h"
-#elif defined(STM32F105xC)
-#include "stm32f1xx.h"
-#include "STM32Utils.h"
 #else
 #include <Arduino.h>
 #undef PI //Undefine PI to get rid of annoying warning as it is also defined in arm_math.h.
 #endif
 
-#if defined(__SAM3X8E__) || defined(STM32F105xC)
+#if defined(__SAM3X8E__)
 #define  ARM_MATH_CM3
 #elif defined(STM32F7XX)
 #define  ARM_MATH_CM7
@@ -72,7 +69,8 @@ enum MMDVM_STATE {
   STATE_FMCAL15K  = 104,
   STATE_FMCAL20K  = 105,
   STATE_FMCAL25K  = 106,
-  STATE_FMCAL30K  = 107
+  STATE_FMCAL30K  = 107,
+  STATE_M17CAL    = 108
 };
 
 #include "SerialPort.h"
@@ -103,6 +101,7 @@ enum MMDVM_STATE {
 #include "CWIdTX.h"
 #include "AX25RX.h"
 #include "AX25TX.h"
+#include "CalM17.h"
 #include "Debug.h"
 #include "IO.h"
 #include "FM.h"
@@ -116,7 +115,7 @@ const uint16_t RX_BLOCK_SIZE = 2U;
 const uint16_t TX_RINGBUFFER_SIZE = 500U;
 const uint16_t RX_RINGBUFFER_SIZE = 600U;
 
-#if defined(STM32F105xC) || defined(__MK20DX256__)
+#if defined(__MK20DX256__)
 const uint16_t TX_BUFFER_LEN = 2000U;
 #else
 const uint16_t TX_BUFFER_LEN = 4000U;
@@ -188,6 +187,8 @@ extern CCalPOCSAG calPOCSAG;
 #if defined(MODE_M17)
 extern CM17RX m17RX;
 extern CM17TX m17TX;
+
+extern CCalM17 calM17;
 #endif
 
 #if defined(MODE_FM)

IO.cpp

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2015,2016,2017,2018,2020 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2015,2016,2017,2018,2020,2021,2023 by Jonathan Naylor G4KLX
  *   Copyright (C) 2015 by Jim Mclaughlin KI6ZUM
  *   Copyright (C) 2016 by Colin Durbridge G4EML
  *
@@ -91,9 +91,13 @@ m_dcState(),
 m_gaussianFilter(),
 m_gaussianState(),
 #endif
-#if defined(MODE_DMR) || defined(MODE_YSF)
-m_rrc02Filter(),
-m_rrc02State(),
+#if defined(MODE_DMR)
+m_rrc02Filter1(),
+m_rrc02State1(),
+#endif
+#if defined(MODE_YSF)
+m_rrc02Filter2(),
+m_rrc02State2(),
 #endif
 #if defined(MODE_P25)
 m_boxcar5Filter(),
@@ -138,7 +142,7 @@ m_watchdog(0U),
 m_lockout(false)
 {
 #if defined(USE_DCBLOCKER)
-  ::memset(m_dcState,       0x00U,   4U * sizeof(q31_t));
+  ::memset(m_dcState, 0x00U, 4U * sizeof(q31_t));
   m_dcFilter.numStages = DC_FILTER_STAGES;
   m_dcFilter.pState    = m_dcState;
   m_dcFilter.pCoeffs   = DC_FILTER;
@@ -152,11 +156,18 @@ m_lockout(false)
   m_gaussianFilter.pCoeffs = GAUSSIAN_0_5_FILTER;
 #endif
 
-#if defined(MODE_DMR) || defined(MODE_YSF)
-  ::memset(m_rrc02State, 0x00U, 70U * sizeof(q15_t));
-  m_rrc02Filter.numTaps = RRC_0_2_FILTER_LEN;
-  m_rrc02Filter.pState  = m_rrc02State;
-  m_rrc02Filter.pCoeffs = RRC_0_2_FILTER;
+#if defined(MODE_DMR)
+  ::memset(m_rrc02State1, 0x00U, 70U * sizeof(q15_t));
+  m_rrc02Filter1.numTaps = RRC_0_2_FILTER_LEN;
+  m_rrc02Filter1.pState  = m_rrc02State1;
+  m_rrc02Filter1.pCoeffs = RRC_0_2_FILTER;
+#endif
+
+#if defined(MODE_YSF)
+  ::memset(m_rrc02State2, 0x00U, 70U * sizeof(q15_t));
+  m_rrc02Filter2.numTaps = RRC_0_2_FILTER_LEN;
+  m_rrc02Filter2.pState  = m_rrc02State2;
+  m_rrc02Filter2.pCoeffs = RRC_0_2_FILTER;
 #endif
 
 #if defined(MODE_P25)
@@ -458,7 +469,7 @@ void CIO::process()
 #if defined(MODE_DMR)
       if (m_dmrEnable) {
         q15_t DMRVals[RX_BLOCK_SIZE];
-        ::arm_fir_fast_q15(&m_rrc02Filter, samples, DMRVals, RX_BLOCK_SIZE);
+        ::arm_fir_fast_q15(&m_rrc02Filter1, samples, DMRVals, RX_BLOCK_SIZE);
 
         if (m_duplex)
           dmrIdleRX.samples(DMRVals, RX_BLOCK_SIZE);
@@ -471,9 +482,9 @@ void CIO::process()
       if (m_ysfEnable) {
         q15_t YSFVals[RX_BLOCK_SIZE];
 #if defined(USE_DCBLOCKER)
-        ::arm_fir_fast_q15(&m_rrc02Filter, dcSamples, YSFVals, RX_BLOCK_SIZE);
+        ::arm_fir_fast_q15(&m_rrc02Filter2, dcSamples, YSFVals, RX_BLOCK_SIZE);
 #else
-        ::arm_fir_fast_q15(&m_rrc02Filter, samples, YSFVals, RX_BLOCK_SIZE);
+        ::arm_fir_fast_q15(&m_rrc02Filter2, samples, YSFVals, RX_BLOCK_SIZE);
 #endif
         ysfRX.samples(YSFVals, rssi, RX_BLOCK_SIZE);
       }
@@ -495,9 +506,9 @@ void CIO::process()
       if (m_fmEnable) {
         bool cos = getCOSInt();
 #if defined(USE_DCBLOCKER)
-        fm.samples(cos, dcSamples, RX_BLOCK_SIZE);
+        fm.samples(cos, dcSamples, rssi, RX_BLOCK_SIZE);
 #else
-        fm.samples(cos, samples, RX_BLOCK_SIZE);
+        fm.samples(cos, samples, rssi, RX_BLOCK_SIZE);
 #endif
       }
 #endif
@@ -505,9 +516,9 @@ void CIO::process()
 #if defined(MODE_FM) && defined(MODE_AX25)
       if (m_ax25Enable) {
 #if defined(USE_DCBLOCKER)
-        ax25RX.samples(dcSamples, RX_BLOCK_SIZE);
+        ax25RX.samples(dcSamples, rssi, RX_BLOCK_SIZE);
 #else
-        ax25RX.samples(samples, RX_BLOCK_SIZE);
+        ax25RX.samples(samples, rssi, RX_BLOCK_SIZE);
 #endif
       }
 #endif
@@ -531,7 +542,7 @@ void CIO::process()
     else if (m_modemState == STATE_DMR) {
       if (m_dmrEnable) {
         q15_t DMRVals[RX_BLOCK_SIZE];
-        ::arm_fir_fast_q15(&m_rrc02Filter, samples, DMRVals, RX_BLOCK_SIZE);
+        ::arm_fir_fast_q15(&m_rrc02Filter1, samples, DMRVals, RX_BLOCK_SIZE);
 
         if (m_duplex) {
           // If the transmitter isn't on, use the DMR idle RX to detect the wakeup CSBKs
@@ -551,9 +562,9 @@ void CIO::process()
       if (m_ysfEnable) {
         q15_t YSFVals[RX_BLOCK_SIZE];
 #if defined(USE_DCBLOCKER)
-        ::arm_fir_fast_q15(&m_rrc02Filter, dcSamples, YSFVals, RX_BLOCK_SIZE);
+        ::arm_fir_fast_q15(&m_rrc02Filter2, dcSamples, YSFVals, RX_BLOCK_SIZE);
 #else
-        ::arm_fir_fast_q15(&m_rrc02Filter, samples, YSFVals, RX_BLOCK_SIZE);
+        ::arm_fir_fast_q15(&m_rrc02Filter2, samples, YSFVals, RX_BLOCK_SIZE);
 #endif
         ysfRX.samples(YSFVals, rssi, RX_BLOCK_SIZE);
       }
@@ -616,18 +627,18 @@ void CIO::process()
     else if (m_modemState == STATE_FM) {
       bool cos = getCOSInt();
 #if defined(USE_DCBLOCKER)
-      fm.samples(cos, dcSamples, RX_BLOCK_SIZE);
+      fm.samples(cos, dcSamples, rssi, RX_BLOCK_SIZE);
 
 #if defined(MODE_AX25)
       if (m_ax25Enable)
-        ax25RX.samples(dcSamples, RX_BLOCK_SIZE);
+        ax25RX.samples(dcSamples, rssi, RX_BLOCK_SIZE);
 #endif
 #else
-      fm.samples(cos, samples, RX_BLOCK_SIZE);
+      fm.samples(cos, samples, rssi, RX_BLOCK_SIZE);
 
 #if defined(MODE_AX25)
       if (m_ax25Enable)
-        ax25RX.samples(samples, RX_BLOCK_SIZE);
+        ax25RX.samples(samples, rssi, RX_BLOCK_SIZE);
 #endif
 #endif
     }

IO.h

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2015,2016,2017,2018,2020 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2015,2016,2017,2018,2020,2021 by Jonathan Naylor G4KLX
  *
  *   This program is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by
@@ -81,9 +81,14 @@ private:
   q15_t                m_gaussianState[40U];      // NoTaps + BlockSize - 1, 12 + 20 - 1 plus some spare
 #endif
 
-#if defined(MODE_DMR) || defined(MODE_YSF)
-  arm_fir_instance_q15 m_rrc02Filter;
-  q15_t                m_rrc02State[70U];         // NoTaps + BlockSize - 1, 42 + 20 - 1 plus some spare
+#if defined(MODE_DMR)
+  arm_fir_instance_q15 m_rrc02Filter1;
+  q15_t                m_rrc02State1[70U];         // NoTaps + BlockSize - 1, 42 + 20 - 1 plus some spare
+#endif
+
+#if defined(MODE_YSF)
+  arm_fir_instance_q15 m_rrc02Filter2;
+  q15_t                m_rrc02State2[70U];         // NoTaps + BlockSize - 1, 42 + 20 - 1 plus some spare
 #endif
 
 #if defined(MODE_P25)

IOSTM.cpp

@@ -1,7 +1,7 @@
 /*
  *   Copyright (C) 2016 by Jim McLaughlin KI6ZUM
  *   Copyright (C) 2016,2017,2018 by Andy Uribe CA6JAU
- *   Copyright (C) 2017,2018,2020 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2017,2018,2020,2023 by Jonathan Naylor G4KLX
  *   Copyright (C) 2019,2020 by BG5HHP
  *
  *   This program is free software; you can redistribute it and/or modify
@@ -365,10 +365,16 @@ void CIO::interrupt()
 #endif
    }
 
-   // trigger next ADC1
+   // Trigger next ADC1
    ADC_ClearFlag(ADC1, ADC_FLAG_EOC);
    ADC_SoftwareStartConv(ADC1);
 
+#if defined(SEND_RSSI_DATA)
+   // Trigger next ADC2
+   ADC_ClearFlag(ADC2, ADC_FLAG_EOC);
+   ADC_SoftwareStartConv(ADC2);
+#endif
+
    m_rxBuffer.put(sample);
    m_rssiBuffer.put(rawRSSI);
 

IOSTM_CMSIS.cpp

@@ -1,500 +0,0 @@
-/*
- *   Copyright (C) 2016 by Jim McLaughlin KI6ZUM
- *   Copyright (C) 2016, 2017 by Andy Uribe CA6JAU
- *   Copyright (C) 2017,2018,2020 by Jonathan Naylor G4KLX
- *   Copyright (C) 2017 by Wojciech Krutnik N0CALL
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include "Config.h"
-#include "Globals.h"
-#include "IO.h"
-
-#if defined(STM32F1)
-
-#if defined(STM32F1_POG)
-/*
-Pin definitions for STM32F1 POG Board:
-
-PTT      PB12   output
-COSLED   PB5    output
-LED      PB4    output
-COS      PB13   input/PD
-
-DSTAR    PB7    output
-DMR      PB6    output
-YSF      PB8    output
-P25      PB9    output
-NXDN     PB10   output
-POCSAG   PB11   output
-
-RX       PB0    analog input (ADC1_8)
-RSSI     PB1    analog input (ADC2_9)
-TX       PA4    analog output (DAC_OUT1)
-
-EXT_CLK  PA15   input (AF: TIM2_CH1_ETR)
-
-USART1_TXD PA9  output (AF)
-USART1_RXD PA10  input (AF)
-
-*/
-
-#define PIN_PTT           12
-#define PORT_PTT          GPIOB
-#define BB_PTT            *((bitband_t)BITBAND_PERIPH(&PORT_PTT->ODR, PIN_PTT))
-#define PIN_COSLED        5
-#define PORT_COSLED       GPIOB
-#define BB_COSLED         *((bitband_t)BITBAND_PERIPH(&PORT_COSLED->ODR, PIN_COSLED))
-#define PIN_LED           4
-#define PORT_LED          GPIOB
-#define BB_LED            *((bitband_t)BITBAND_PERIPH(&PORT_LED->ODR, PIN_LED))
-#define PIN_COS           13
-#define PORT_COS          GPIOB
-#define BB_COS            *((bitband_t)BITBAND_PERIPH(&PORT_COS->IDR, PIN_COS))
-
-#define PIN_DSTAR         7
-#define PORT_DSTAR        GPIOB
-#define BB_DSTAR          *((bitband_t)BITBAND_PERIPH(&PORT_DSTAR->ODR, PIN_DSTAR))
-#define PIN_DMR           6
-#define PORT_DMR          GPIOB
-#define BB_DMR            *((bitband_t)BITBAND_PERIPH(&PORT_DMR->ODR, PIN_DMR))
-#define PIN_YSF           8
-#define PORT_YSF          GPIOB
-#define BB_YSF            *((bitband_t)BITBAND_PERIPH(&PORT_YSF->ODR, PIN_YSF))
-#define PIN_P25           9
-#define PORT_P25          GPIOB
-#define BB_P25            *((bitband_t)BITBAND_PERIPH(&PORT_P25->ODR, PIN_P25))
-#define PIN_NXDN          10
-#define PORT_NXDN         GPIOB
-#define BB_NXDN           *((bitband_t)BITBAND_PERIPH(&PORT_NXDN->ODR, PIN_NXDN))
-#define PIN_POCSAG        11
-#define PORT_POCSAG       GPIOB
-#define BB_POCSAG         *((bitband_t)BITBAND_PERIPH(&PORT_POCSAG->ODR, PIN_POCSAG))
-
-#define PIN_RX            0
-#define PIN_RX_ADC_CH     8
-#define PORT_RX           GPIOB
-#define PIN_RSSI          1
-#define PIN_RSSI_ADC_CH   9
-#define PORT_RSSI         GPIOB
-#define PIN_TX            4
-#define PIN_TX_DAC_CH     1
-#define PORT_TX           GPIOA
-
-#define PIN_EXT_CLK       15
-#define SRC_EXT_CLK       15
-#define PORT_EXT_CLK      GPIOA
-
-#define PIN_USART1_TXD    9
-#define PORT_USART1_TXD   GPIOA
-#define PIN_USART1_RXD    10
-#define PORT_USART1_RXD   GPIOA
-
-#else   // defined(STM32F1_POG)
-#error "Either STM32F1_POG, or sth need to be defined"
-#endif  // defined(STM32F1_POG)
-
-const uint16_t DC_OFFSET = 2048U;
-
-// Sampling frequency
-#define SAMP_FREQ   24000
-
-extern "C" {
-  void TIM2_IRQHandler() {
-    if ((TIM2->SR & TIM_SR_UIF) == TIM_SR_UIF) {
-      TIM2->SR = ~TIM_SR_UIF;   // clear UI flag
-      io.interrupt();
-    }
-  }
-}
-
-
-void delay(uint32_t cnt)
-{
-  while(cnt--)
-    asm("nop");
-}
-
-// source: http://www.freddiechopin.info/
-void GPIOConfigPin(GPIO_TypeDef *port_ptr, uint32_t pin, uint32_t mode_cnf_value)
-{
-	volatile uint32_t *cr_ptr;
-	uint32_t cr_value;
-
-	cr_ptr = &port_ptr->CRL;  // configuration of pins [0,7] is in CRL
-
-	if (pin >= 8)			        // is pin in [8; 15]?
-	{									        // configuration of pins [8,15] is in CRH
-		cr_ptr++;               // advance to next struct element CRL -> CRH
-		pin -= 8;               // crop the pin number
-	}
-
-	cr_value = *cr_ptr;			  // localize the CRL / CRH value
-
-	cr_value &= ~(0xF << (pin * 4));	// clear the MODE and CNF fields (now that pin is an analog input)
-	cr_value |= (mode_cnf_value << (pin * 4));	        // save new MODE and CNF value for desired pin
-
-	*cr_ptr = cr_value;				// save localized value to CRL / CRL
-}
-
-#if defined(STM32F1_POG)
-void FancyLEDEffect()
-{
-  bitband_t foo[] = {&BB_LED, &BB_COSLED, &BB_PTT, &BB_DMR, &BB_DSTAR, &BB_YSF, &BB_P25};
-   
-  for(int i=0; i<7; i++){
-    *foo[i] = 0x01;
-  }
-  GPIOConfigPin(PORT_USART1_TXD, PIN_USART1_TXD, GPIO_CRL_MODE0_1);
-  *((bitband_t)BITBAND_PERIPH(&PORT_USART1_TXD->ODR, PIN_USART1_TXD)) = 0x00;
-  delay(SystemCoreClock/1000*100);
-  for(int i=0; i<7; i++){
-    *foo[i] = 0x00;
-  }
-  *((bitband_t)BITBAND_PERIPH(&PORT_USART1_TXD->ODR, PIN_USART1_TXD)) = 0x01;
-  delay(SystemCoreClock/1000*20);
-  *((bitband_t)BITBAND_PERIPH(&PORT_USART1_TXD->ODR, PIN_USART1_TXD)) = 0x00;
-  delay(SystemCoreClock/1000*10);
-  *((bitband_t)BITBAND_PERIPH(&PORT_USART1_TXD->ODR, PIN_USART1_TXD)) = 0x01;
-  
-  *foo[0] = 0x01;
-  for(int i=1; i<7; i++){
-    delay(SystemCoreClock/1000*10);
-    *foo[i-1] = 0x00;
-    *foo[i] = 0x01;
-  }
-  for(int i=5; i>=0; i--){
-    delay(SystemCoreClock/1000*10);
-    *foo[i+1] = 0x00;
-    *foo[i] = 0x01;
-  }
-  delay(SystemCoreClock/1000*10);
-  *foo[5+1-6] = 0x00;
-  *((bitband_t)BITBAND_PERIPH(&PORT_USART1_TXD->ODR, PIN_USART1_TXD)) = 0x00;
-  delay(SystemCoreClock/1000*10);
-  *((bitband_t)BITBAND_PERIPH(&PORT_USART1_TXD->ODR, PIN_USART1_TXD)) = 0x01;
-  GPIOConfigPin(PORT_USART1_TXD, PIN_USART1_TXD, GPIO_CRL_MODE0_1|GPIO_CRL_CNF0_1);
-  delay(SystemCoreClock/1000*50);
-}
-#endif
-
-static inline void GPIOInit()
-{
-  RCC->APB2ENR |= RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN
-                  | RCC_APB2ENR_IOPCEN | RCC_APB2ENR_IOPDEN
-                  | RCC_APB2ENR_AFIOEN;	// enable all GPIOs
-                 
-	// set all ports to input with pull-down
-	GPIOA->CRL = 0x88888888;
-	GPIOA->CRH = 0x88888888;
-	GPIOA->ODR = 0;
-	GPIOB->CRL = 0x88888888;
-	GPIOB->CRH = 0x88888888;
-	GPIOB->ODR = 0;
-	GPIOC->CRL = 0x88888888;
-	GPIOC->CRH = 0x88888888;
-	GPIOC->ODR = 0;
-	GPIOD->CRL = 0x88888888;
-	GPIOD->CRH = 0x88888888;
-	GPIOD->ODR = 0;
-  
-  // configure ports
-  GPIOConfigPin(PORT_PTT,    PIN_PTT,    GPIO_CRL_MODE0_1);
-  GPIOConfigPin(PORT_COSLED, PIN_COSLED, GPIO_CRL_MODE0_1);
-  GPIOConfigPin(PORT_LED,    PIN_LED,    GPIO_CRL_MODE0_1);
-  GPIOConfigPin(PORT_COS,    PIN_COS,    GPIO_CRL_CNF0_1);
-  
-  GPIOConfigPin(PORT_DSTAR,  PIN_DSTAR,  GPIO_CRL_MODE0_1);
-  GPIOConfigPin(PORT_DMR,    PIN_DMR,    GPIO_CRL_MODE0_1);
-  GPIOConfigPin(PORT_YSF,    PIN_YSF,    GPIO_CRL_MODE0_1);
-  GPIOConfigPin(PORT_P25,    PIN_P25,    GPIO_CRL_MODE0_1);
-#if !defined(USE_ALTERNATE_NXDN_LEDS)
-  GPIOConfigPin(PORT_NXDN,   PIN_NXDN,   GPIO_CRL_MODE0_1);
-#endif
-#if !defined(USE_ALTERNATE_M17_LEDS)
-  GPIOConfigPin(PORT_M17,    PIN_M17,    GPIO_CRL_MODE0_1);
-#endif
-#if !defined(USE_ALTERNATE_POCSAG_LEDS)
-  GPIOConfigPin(PORT_POCSAG, PIN_POCSAG, GPIO_CRL_MODE0_1);
-#endif
-
-  GPIOConfigPin(PORT_RX, PIN_RX, 0);
-#if defined(SEND_RSSI_DATA)
-  GPIOConfigPin(PORT_RSSI, PIN_RSSI, 0);
-#endif
-  GPIOConfigPin(PORT_TX, PIN_TX, 0);
-
-#if defined(EXTERNAL_OSC)
-#if defined(STM32F1_POG)
-  GPIOConfigPin(PORT_EXT_CLK, PIN_EXT_CLK, GPIO_CRL_CNF0_0);
-  AFIO->MAPR = (AFIO->MAPR & ~AFIO_MAPR_TIM2_REMAP) | AFIO_MAPR_TIM2_REMAP_0;
-#endif
-#endif
-
-  GPIOConfigPin(PORT_USART1_TXD, PIN_USART1_TXD, GPIO_CRL_MODE0_1|GPIO_CRL_CNF0_1);
-  GPIOConfigPin(PORT_USART1_RXD, PIN_USART1_RXD, GPIO_CRL_CNF0_0);
-  
-  AFIO->MAPR = (AFIO->MAPR & ~AFIO_MAPR_SWJ_CFG) | AFIO_MAPR_SWJ_CFG_1;
-}
-
-
-static inline void ADCInit()
-{
-  RCC->CFGR = (RCC->CFGR & ~RCC_CFGR_ADCPRE_Msk)
-              | RCC_CFGR_ADCPRE_DIV6; // ADC clock divided by 6 (72MHz/6 = 12MHz)
-  RCC->APB2ENR |= RCC_APB2ENR_ADC1EN;
-#if defined(SEND_RSSI_DATA)
-  RCC->APB2ENR |= RCC_APB2ENR_ADC2EN;
-#endif
-
-  // Init ADCs in dual mode (RSSI)
-#if defined(SEND_RSSI_DATA)
-  ADC1->CR1 = ADC_CR1_DUALMOD_1|ADC_CR1_DUALMOD_2;  // Regular simultaneous mode
-#endif
-
-  // Set sampling time to 7.5 cycles
-  if (PIN_RX_ADC_CH < 10) {
-    ADC1->SMPR2 = ADC_SMPR2_SMP0_0 << (3*PIN_RX_ADC_CH); 
-  } else {
-    ADC1->SMPR1 = ADC_SMPR1_SMP10_0 << (3*PIN_RX_ADC_CH);
-  }
-#if defined(SEND_RSSI_DATA)
-  if (PIN_RSSI_ADC_CH < 10) {
-    ADC2->SMPR2 = ADC_SMPR2_SMP0_0 << (3*PIN_RSSI_ADC_CH); 
-  } else {
-    ADC2->SMPR1 = ADC_SMPR1_SMP10_0 << (3*PIN_RSSI_ADC_CH);
-  }
-#endif
-
-  // Set conversion channel (single conversion)
-  ADC1->SQR3 = PIN_RX_ADC_CH;
-#if defined(SEND_RSSI_DATA)
-  ADC2->SQR3 = PIN_RSSI_ADC_CH;
-#endif
-
-  // Enable ADC
-  ADC1->CR2 |= ADC_CR2_ADON;
-
-#if defined(SEND_RSSI_DATA)
-  // Enable ADC2
-  ADC2->CR2 |= ADC_CR2_ADON;
-#endif
-
-  // Start calibration
-  delay(6*2);
-  ADC1->CR2 |= ADC_CR2_CAL;
-  while((ADC1->CR2 & ADC_CR2_CAL) == ADC_CR2_CAL)
-    ;
-#if defined(SEND_RSSI_DATA)
-  ADC2->CR2 |= ADC_CR2_CAL;
-  while((ADC2->CR2 & ADC_CR2_CAL) == ADC_CR2_CAL)
-    ;
-#endif
-  
-  // Trigger first conversion
-  ADC1->CR2 |= ADC_CR2_ADON;
-#if defined(SEND_RSSI_DATA)
-  ADC2->CR2 |= ADC_CR2_ADON;
-#endif
-}
-
-
-static inline void DACInit()
-{
-  RCC->APB1ENR |= RCC_APB1ENR_DACEN;
-
-  DAC->CR = DAC_CR_EN1;
-}
-
-
-static inline void TimerInit()
-{
-  RCC->APB1ENR |= RCC_APB1ENR_TIM2EN;
-
-#if defined(EXTERNAL_OSC)
-  // Enable external clock, prescaler /4
-  TIM2->SMCR = TIM_SMCR_ECE | TIM_SMCR_ETPS_1;
-#endif
-
-  // TIM2 output frequency
-  TIM2->PSC = 0;
-#if defined(EXTERNAL_OSC)
-  // TimerCount = ExternalOsc
-  //              /4 (external clock prescaler)
-  //              /SAMP_FREQ
-  TIM2->ARR = (uint16_t) ((EXTERNAL_OSC/(4*SAMP_FREQ)) - 1);
-#else
-  TIM2->ARR = (uint16_t) ((SystemCoreClock/(SAMP_FREQ)) - 1);
-#endif
-
-  // Enable TIse 1%-tolerance comM2 interrupt
-  TIM2->DIER = TIM_DIER_UIE;
-  NVIC_EnableIRQ(TIM2_IRQn);
-  
-  // Enable TIM2
-  TIM2->CR1 |= TIM_CR1_CEN;
-}
-
-
-void CIO::initInt()
-{
-  GPIOInit();
-  ADCInit();
-  DACInit();
-#if defined(STM32F1_POG)
-  FancyLEDEffect();
-#endif
-}
-
-void CIO::startInt()
-{
-  TimerInit();
-   
-  BB_COSLED = 0;
-  BB_LED = 1;
-}
-
-void CIO::interrupt()
-{
-  TSample sample = {DC_OFFSET, MARK_NONE};
-#if defined(SEND_RSSI_DATA)
-  uint16_t rawRSSI = 0U;
-#endif
-  bitband_t eoc = (bitband_t)BITBAND_PERIPH(&ADC1->SR, ADC_SR_EOS_Pos);
-  bitband_t adon = (bitband_t)BITBAND_PERIPH(&ADC1->CR2, ADC_CR2_ADON_Pos);
-#if defined(SEND_RSSI_DATA)
-  bitband_t rssi_adon = (bitband_t)BITBAND_PERIPH(&ADC2->CR2, ADC_CR2_ADON_Pos);
-#endif
-
-  if (*eoc) {
-    // trigger next conversion
-    *adon = 1;
-#if defined(SEND_RSSI_DATA)
-    *rssi_adon = 1;
-#endif
-    
-    m_txBuffer.get(sample);
-    DAC->DHR12R1 = sample.sample;  // Send the value to the DAC
-
-    // Read value from ADC1 and ADC2
-    sample.sample  = ADC1->DR;   // read conversion result; EOC is cleared by this read
-    m_rxBuffer.put(sample);
-#if defined(SEND_RSSI_DATA)
-    rawRSSI = ADC2->DR;
-    m_rssiBuffer.put(rawRSSI);
-#endif
-
-    m_watchdog++;
-  }
-}
-
-bool CIO::getCOSInt()
-{
-  return BB_COS;
-}
-
-void CIO::setLEDInt(bool on)
-{
-  BB_LED = !!on;
-}
-
-void CIO::setPTTInt(bool on)
-{
-  BB_PTT = !!on;
-}
-
-void CIO::setCOSInt(bool on)
-{
-  BB_COSLED = !!on;
-}
-
-void CIO::setDStarInt(bool on)
-{
-  BB_DSTAR = !!on;
-}
-
-void CIO::setDMRInt(bool on)
-{
-  BB_DMR = !!on;
-}
-
-void CIO::setYSFInt(bool on)
-{
-  BB_YSF = !!on;
-}
-
-void CIO::setP25Int(bool on)
-{
-  BB_P25 = !!on;
-}
-
-void CIO::setNXDNInt(bool on)
-{
-#if defined(USE_ALTERNATE_NXDN_LEDS)
-  BB_YSF = !!on;
-  BB_P25 = !!on;
-#else
-  BB_NXDN = !!on;
-#endif
-}
-
-void CIO::setM17Int(bool on)
-{
-#if defined(USE_ALTERNATE_M17_LEDS)
-  BB_DSTAR = !!on;
-  BB_P25   = !!on;
-#else
-  BB_M17 = !!on;
-#endif
-}
-
-void CIO::setPOCSAGInt(bool on)
-{
-#if defined(USE_ALTERNATE_POCSAG_LEDS)
-  BB_DSTAR = !!on;
-  BB_DMR   = !!on;
-#else
-  BB_POCSAG = !!on;
-#endif
-}
-
-void CIO::setFMInt(bool on)
-{
-#if defined(USE_ALTERNATE_FM_LEDS)
-  BB_DSTAR = !!on;
-  BB_YSF   = !!on;
-#endif
-}
-
-void CIO::delayInt(unsigned int dly)
-{
-  delay(dly);
-}
-
-uint8_t CIO::getCPU() const
-{
-  return 2U;
-}
-
-void CIO::getUDID(uint8_t* buffer)
-{
-#if defined(STM32F105xC)
-  ::memcpy(buffer, (void *)0x1FFFF7E8, 12U);
-#endif
-}
-
-#endif
-

M17TX.cpp

@@ -160,7 +160,7 @@ void CM17TX::writeByte(uint8_t c)
 
 void CM17TX::writeSilence()
 {
-  q15_t inBuffer[4U] = {0x00U, 0x00U, 0x00U, 0x00U};
+  q15_t inBuffer[4U] = {0, 0, 0, 0};
   q15_t outBuffer[M17_RADIO_SYMBOL_LENGTH * 4U];
 
   ::arm_fir_interpolate_q15(&m_modFilter, inBuffer, outBuffer, 4U);

MMDVM.cpp

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2015,2016,2017,2018,2020 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2015,2016,2017,2018,2020,2021 by Jonathan Naylor G4KLX
  *   Copyright (C) 2016 by Mathis Schmieder DB9MAT
  *   Copyright (C) 2016 by Colin Durbridge G4EML
  *
@@ -18,7 +18,7 @@
  *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#if defined(STM32F4XX) || defined(STM32F7XX) || defined(STM32F105xC)
+#if defined(STM32F4XX) || defined(STM32F7XX)
 
 #include "Config.h"
 #include "Globals.h"
@@ -82,6 +82,8 @@ CCalNXDN calNXDN;
 #if defined(MODE_M17)
 CM17RX m17RX;
 CM17TX m17TX;
+
+CCalM17 calM17;
 #endif
 
 #if defined(MODE_POCSAG)
@@ -192,6 +194,11 @@ void loop()
     calNXDN.process();
 #endif
 
+#if defined(MODE_M17)
+  if (m_modemState == STATE_M17CAL)
+    calM17.process();
+#endif
+
 #if defined(MODE_POCSAG)
   if (m_modemState == STATE_POCSAGCAL)
     calPOCSAG.process();

MMDVM.ino

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2015,2016,2017,2018,2020 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2015,2016,2017,2018,2020,2021 by Jonathan Naylor G4KLX
  *   Copyright (C) 2016 by Colin Durbridge G4EML
  *
  *   This program is free software; you can redistribute it and/or modify
@@ -79,6 +79,8 @@ CCalNXDN calNXDN;
 #if defined(MODE_M17)
 CM17RX m17RX;
 CM17TX m17TX;
+
+CCalM17 calM17;
 #endif
 
 #if defined(MODE_POCSAG)
@@ -189,6 +191,11 @@ void loop()
     calNXDN.process();
 #endif
 
+#if defined(MODE_M17)
+  if (m_modemState == STATE_M17CAL)
+    calM17.process();
+#endif
+
 #if defined(MODE_POCSAG)
   if (m_modemState == STATE_POCSAGCAL)
     calPOCSAG.process();

Makefile.CMSIS

@@ -1,165 +0,0 @@
-# The name for the project
-TARGET:=mmdvm
-
-# The CPU architecture (will be used for -mcpu)
-MCPU:=cortex-m3
-MCU:=STM32F105xC
-
-# The source files of the project
-CSRC:=
-CXXSRC:=$(wildcard *.cpp)
-
-# Include directory for the system include files and system source file
-SYSDIR:=system_stm32f1xx
-SYSSRC:=$(SYSDIR)/system_stm32f1xx.c
-
-# Other include directories
-INCDIR:=
-
-# Definitions
-CDEFS:=
-CXXDEFS:=
-
-# The name of the startup file which matches to the architecture (MCPU)
-STARTUP:=$(SYSDIR)/startup_stm32f105xc.S
-STARTUP_DEFS=
-
-# Include directory for CMSIS
-CMSISDIR:=STM32F10X_Lib/CMSIS
-
-# Libraries
-LIBDIR:=
-LIBS:=-larm_cortexM3l_math
-
-# Name of the linker script
-LDSCRIPT:=$(SYSDIR)/gcc.ld
-
-# Target objects and binaries directory
-OBJDIR:=obj
-BINDIR:=bin
-
-# Port definition for programming via bootloader (using stm32flash)
-BL_PORT:=ttyUSB0
-
-
-
-# Internal Variables
-ELF:=$(BINDIR)/$(TARGET).elf
-HEX:=$(BINDIR)/$(TARGET).hex
-DIS:=$(BINDIR)/$(TARGET).dis
-MAP:=$(BINDIR)/$(TARGET).map
-OBJ:=$(CSRC:%.c=$(OBJDIR)/%.o) $(CXXSRC:%.cpp=$(OBJDIR)/%.o)
-OBJ+=$(SYSSRC:$(SYSDIR)/%.c=$(OBJDIR)/%.o) $(STARTUP:$(SYSDIR)/%.S=$(OBJDIR)/%.o)
-
-# Replace standard build tools by arm tools
-CC:=arm-none-eabi-gcc
-CXX:=arm-none-eabi-g++
-AS:=arm-none-eabi-gcc
-LD:=arm-none-eabi-g++
-OBJCOPY:=arm-none-eabi-objcopy
-OBJDUMP:=arm-none-eabi-objdump
-SIZE:=arm-none-eabi-size
-
-# Common flags
-COMMON_FLAGS =-mthumb -mlittle-endian -mcpu=$(MCPU)
-COMMON_FLAGS+= -Wall
-COMMON_FLAGS+= -I. -I$(CMSISDIR)/Include -I$(CMSISDIR)/Device/ST/STM32F1xx/Include -I$(SYSDIR)
-COMMON_FLAGS+=  $(addprefix -I,$(INCDIR))
-COMMON_FLAGS+= -D$(MCU) -DMADEBYMAKEFILE -DSTM32F1
-COMMON_FLAGS+= -Os -flto -ffunction-sections -fdata-sections
-COMMON_FLAGS+= -g
-# Assembler flags
-ASFLAGS:=$(COMMON_FLAGS)
-# C flags
-CFLAGS:=$(COMMON_FLAGS) $(addprefix -D,$(CDEFS))
-CFLAGS+= -std=gnu11 -nostdlib
-# CXX flags
-CXXFLAGS:=$(COMMON_FLAGS) $(addprefix -D,$(CXXDEFS))
-CXXFLAGS+= -nostdlib -fno-exceptions -fno-rtti
-# LD flags
-LDFLAGS:=$(COMMON_FLAGS) -Wl,--gc-sections -Wl,-Map=$(MAP) -Wl,--no-wchar-size-warning
-LDFLAGS+= --specs=nosys.specs --specs=nano.specs
-LDFLAGS+= -L$(CMSISDIR)/Lib/GCC/ $(addprefix -L,$(LIBDIR))
-LDLIBS:=-T$(LDSCRIPT) $(LIBS)
-
-# Dependecies
-DEPENDS:=$(CSRC:%.c=$(OBJDIR)/%.d) $(CXXSRC:%.cpp=$(OBJDIR)/%.d)
-
-
-# Additional Suffixes
-.SUFFIXES: .elf .hex
-
-# Targets
-.PHONY: all
-all: GitVersion.h $(DIS) $(HEX)
-	$(SIZE) $(ELF)
-
-.PHONY: program
-program: $(HEX) $(ELF)
-	openocd -f openocd.cfg \
-					-c "program $(HEX) verify reset exit"
-	$(SIZE) $(ELF)
-
-.PHONY: program_bl
-program_bl: $(HEX) $(ELF)
-	stm32flash -w $(HEX) -v /dev/$(BL_PORT)
-	$(SIZE) $(ELF)
-
-.PHONY: run
-run: $(HEX) $(ELF)
-	openocd -f openocd.cfg \
-					-c "init" -c "reset" -c "exit"
-
-.PHONY: debug
-debug: $(ELF)
-	./debug.sh $(ELF)
-
-.PHONY: clean
-clean:
-	$(RM) $(OBJ) $(HEX) $(ELF) $(DIS) $(MAP) $(DEPENDS) GitVersion.h
-
-# implicit rules
-.elf.hex:
-	$(OBJCOPY) -O ihex $< $@
-
-$(OBJDIR)/%.o: %.c
-	$(CC) -MMD $(CFLAGS) -c $< -o $@
-
-$(OBJDIR)/%.o: %.cpp
-	$(CXX) -MMD $(CXXFLAGS) -c $< -o $@
-
-$(OBJDIR)/%.o: $(SYSDIR)/%.c
-	$(CC) $(CFLAGS) -c $< -o $@
-
-$(OBJDIR)/%.o: $(SYSDIR)/%.S
-	$(AS) $(ASFLAGS) -c $< -o $@
-
-# explicit rules
-$(OBJDIR):
-	mkdir -p $(OBJDIR)
-
-$(BINDIR):
-	mkdir -p $(BINDIR)
-
-$(ELF): $(OBJDIR) $(BINDIR) $(OBJ)
-	$(LD) $(OBJ) $(LDFLAGS) $(LDLIBS) -o $@
-
-$(DIS): $(ELF)
-	$(OBJDUMP) -S $< > $@
-
-# include dependecies
--include $(DEPENDS)
-
-# Export the current git version if the index file exists, else 000...
-GitVersion.h:
-ifdef SYSTEMROOT
-	echo #define GITVERSION "0000000" > $@
-else ifdef SystemRoot
-	echo #define GITVERSION "0000000" > $@
-else
-ifneq ("$(wildcard .git/index)","")
-	echo "#define GITVERSION \"$(shell git rev-parse --short HEAD)\"" > $@
-else
-	echo "#define GITVERSION \"0000000\"" > $@
-endif
-endif

NXDNTX.cpp

@@ -175,7 +175,7 @@ void CNXDNTX::writeByte(uint8_t c)
 
 void CNXDNTX::writeSilence()
 {
-  q15_t inBuffer[4U] = {0x00U, 0x00U, 0x00U, 0x00U};
+  q15_t inBuffer[4U] = {0, 0, 0, 0};
   q15_t intBuffer[NXDN_RADIO_SYMBOL_LENGTH * 4U];
   q15_t outBuffer[NXDN_RADIO_SYMBOL_LENGTH * 4U];
 

P25TX.cpp

@@ -173,7 +173,7 @@ void CP25TX::writeByte(uint8_t c)
 
 void CP25TX::writeSilence()
 {
-  q15_t inBuffer[4U] = {0x00U, 0x00U, 0x00U, 0x00U};
+  q15_t inBuffer[4U] = {0, 0, 0, 0};
   q15_t intBuffer[P25_RADIO_SYMBOL_LENGTH * 4U];
   q15_t outBuffer[P25_RADIO_SYMBOL_LENGTH * 4U];
 

README.md

@@ -1,17 +1,35 @@
-This is the source code of the MMDVM firmware that supports D-Star, DMR,
-System Fusion, P25, NXDN, POCSAG, and FM modes.
+This is the source code of the MMDVM firmware that supports D-Star, DMR, System Fusion, P25, NXDN, M17, POCSAG, AX.25, and FM modes.
 
-It runs on the Arduino Due, the ST-Micro STM32F1xxx, STM32F4xxx and STM32F7xxx
-processors, as well as the Teensy 3.1/3.2/3.5/3.6. What these platforms have in
-common is the use of an ARM Cortex-M3, M4, or M7 processors with a clock speed
-greater than 70 MHz, and access to at least one analogue to digital converter
-and one digital to analogue converter.
+It runs on the Arduino Due, the ST-Micro STM32F4xxx and STM32F7xxx processors, as well as the Teensy 3.5/3.6. What these platforms have in common is the use of an ARM Cortex-M3, M4, or M7 processors with a minimum clock speed greater of 80 MHz, and access to at least one analogue to digital converter, one digital to analogue converter, as well as a number of GPIO pins.
 
-In order to build this software for the Arduino Due, you will need to edit a
-file within the Arduino GUI and that is detailed in the BUILD.txt file. The
-STM32 support is being supplied via the ARM GCC compiler. The Teensy support
-uses Teensyduino.
+In order to build this software for the Arduino Due, you will need to edit a file within the Arduino GUI and that is detailed in the BUILD.txt file. The STM32 support is supplied via the ARM GCC compiler. The Teensy support uses Teensyduino.
 
-This software is licenced under the GPL v2 and is intended for amateur and
-educational use only. Use of this software for commercial purposes is strictly
-forbidden.
+This software is licenced under the GPL v2 and is primarily intended for amateur and educational use.
+
+Portions of the ARM support code include the following copyright:
+
+   Copyright (c) 2011 - 2013 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.

RingBuff.h

@@ -1,47 +0,0 @@
-/*
- * Copyright (C) 2017 Wojciech Krutnik N0CALL
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- * FIFO ring buffer
- * source:
- * http://stackoverflow.com/questions/6822548/correct-way-of-implementing-a-uart-receive-buffer-in-a-small-arm-microcontroller
- * (modified)
- *
- */
- 
-#if !defined(RINGBUFF_H)
-#define RINGBUFF_H
-
-#define RINGBUFF_SIZE(ringBuff) (ringBuff.size)    /* serial buffer in bytes (power 2)   */
-#define RINGBUFF_MASK(ringBuff) (ringBuff.size-1U) /* buffer size mask                   */
-
-/* Buffer read / write macros                                                   */
-#define RINGBUFF_RESET(ringBuff)         (ringBuff).rdIdx = ringBuff.wrIdx = 0
-#define RINGBUFF_WRITE(ringBuff, dataIn) (ringBuff).data[RINGBUFF_MASK(ringBuff) & ringBuff.wrIdx++] = (dataIn)
-#define RINGBUFF_READ(ringBuff)          ((ringBuff).data[RINGBUFF_MASK(ringBuff) & ((ringBuff).rdIdx++)])
-#define RINGBUFF_EMPTY(ringBuff)         ((ringBuff).rdIdx == (ringBuff).wrIdx)
-#define RINGBUFF_FULL(ringBuff)          ((RINGBUFF_MASK(ringBuff) & ringBuff.rdIdx) == (RINGBUFF_MASK(ringBuff) & ringBuff.wrIdx))
-#define RINGBUFF_COUNT(ringBuff)         (RINGBUFF_MASK(ringBuff) & ((ringBuff).wrIdx - (ringBuff).rdIdx))
-
-/* Buffer type                                                                  */
-#define DECLARE_RINGBUFFER_TYPE(name, _size)                           \
-          typedef struct{                                              \
-            uint32_t size;                                             \
-            uint32_t wrIdx;                                            \
-            uint32_t rdIdx;                                            \
-            uint8_t data[_size];                                       \
-          }name##_t
-
-#endif

RingBuffer.h

@@ -24,15 +24,12 @@
 #include "stm32f4xx.h"
 #elif defined(STM32F7XX)
 #include "stm32f7xx.h"
-#elif defined(STM32F105xC)
-#include "stm32f1xx.h"
-#include <cstddef>
 #else
 #include <Arduino.h>
 #undef PI
 #endif
 
-#if defined(__SAM3X8E__) || defined(STM32F105xC)
+#if defined(__SAM3X8E__)
 #define  ARM_MATH_CM3
 #elif defined(STM32F7XX)
 #define  ARM_MATH_CM7
@@ -74,4 +71,4 @@ private:
 
 #include "RingBuffer.impl.h"
 
-#endif
+#endif

STM32Utils.h

@@ -1,5 +1,7 @@
 /*
- *   source: http://mightydevices.com/?p=144
+ *   Copyright (C) 2017 by Wojciech Krutnik N0CALL
+ *
+ *   Source: http://mightydevices.com/?p=144
  *
  *   This program is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by

SerialPort.cpp

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2013,2015-2021 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2013,2015-2021,2023 by Jonathan Naylor G4KLX
  *   Copyright (C) 2016 by Colin Durbridge G4EML
  *
  *   This program is free software; you can redistribute it and/or modify
@@ -72,6 +72,7 @@ const uint8_t MMDVM_M17_EOT        = 0x49U;
 const uint8_t MMDVM_POCSAG_DATA  = 0x50U;
 
 const uint8_t MMDVM_AX25_DATA    = 0x55U;
+const uint8_t MMDVM_AX25_DATA_EX = 0x56U;
 
 const uint8_t MMDVM_FM_PARAMS1   = 0x60U;
 const uint8_t MMDVM_FM_PARAMS2   = 0x61U;
@@ -80,6 +81,7 @@ const uint8_t MMDVM_FM_PARAMS4   = 0x63U;
 const uint8_t MMDVM_FM_DATA      = 0x65U;
 const uint8_t MMDVM_FM_STATUS    = 0x66U;
 const uint8_t MMDVM_FM_EOT       = 0x67U;
+const uint8_t MMDVM_FM_RSSI      = 0x68U;
 
 const uint8_t MMDVM_ACK          = 0x70U;
 const uint8_t MMDVM_NAK          = 0x7FU;
@@ -140,10 +142,8 @@ m_buffer(),
 m_ptr(0U),
 m_len(0U),
 m_debug(false),
-m_serialData(),
 m_lastSerialAvail(0),
-m_lastSerialAvailCount(0U),
-m_i2CData()
+m_lastSerialAvailCount(0U)
 {
 }
 
@@ -282,27 +282,26 @@ void CSerialPort::getStatus()
   reply[13U] = 0U;
 #endif
 
-  reply[14U] = 0x00U;
-  reply[15U] = 0x00U;
-
 #if defined(MODE_POCSAG)
   if (m_pocsagEnable)
-    reply[16U] = pocsagTX.getSpace();
+    reply[14U] = pocsagTX.getSpace();
   else
-    reply[16U] = 0U;
+    reply[14U] = 0U;
 #else
-  reply[16U] = 0U;
+  reply[14U] = 0U;
 #endif
 
 #if defined(MODE_AX25)
   if (m_ax25Enable)
-    reply[17U] = ax25TX.getSpace();
+    reply[15U] = ax25TX.getSpace();
   else
-    reply[17U] = 0U;
+    reply[15U] = 0U;
 #else
-  reply[17U] = 0U;
+  reply[15U] = 0U;
 #endif
 
+  reply[16U] = 0x00U;
+  reply[17U] = 0x00U;
   reply[18U] = 0x00U;
   reply[19U] = 0x00U;
 
@@ -417,7 +416,9 @@ uint8_t CSerialPort::setConfig(const uint8_t* data, uint16_t length)
 
   MMDVM_STATE modemState = MMDVM_STATE(data[4U]);
 
-  if (modemState != STATE_IDLE && modemState != STATE_DSTAR && modemState != STATE_DMR && modemState != STATE_YSF && modemState != STATE_P25 && modemState != STATE_NXDN && modemState != STATE_M17 && modemState != STATE_POCSAG && modemState != STATE_FM && modemState != STATE_DSTARCAL && modemState != STATE_DMRCAL && modemState != STATE_RSSICAL && modemState != STATE_LFCAL && modemState != STATE_DMRCAL1K && modemState != STATE_P25CAL1K && modemState != STATE_DMRDMO1K && modemState != STATE_NXDNCAL1K && modemState != STATE_POCSAGCAL && modemState != STATE_FMCAL10K && modemState != STATE_FMCAL12K && modemState != STATE_FMCAL15K && modemState != STATE_FMCAL20K && modemState != STATE_FMCAL25K && modemState != STATE_FMCAL30K)
+  if (modemState != STATE_IDLE && modemState != STATE_DSTAR && modemState != STATE_DMR && modemState != STATE_YSF && modemState != STATE_P25 && modemState != STATE_NXDN && modemState != STATE_M17 && modemState != STATE_POCSAG && modemState != STATE_FM &&
+      modemState != STATE_DSTARCAL && modemState != STATE_DMRCAL && modemState != STATE_RSSICAL && modemState != STATE_LFCAL && modemState != STATE_DMRCAL1K && modemState != STATE_P25CAL1K && modemState != STATE_DMRDMO1K && modemState != STATE_NXDNCAL1K && modemState != STATE_M17CAL && modemState != STATE_POCSAGCAL &&
+      modemState != STATE_FMCAL10K && modemState != STATE_FMCAL12K && modemState != STATE_FMCAL15K && modemState != STATE_FMCAL20K && modemState != STATE_FMCAL25K && modemState != STATE_FMCAL30K)
     return 4U;
 
 #if defined(MODE_DSTAR)
@@ -696,7 +697,9 @@ uint8_t CSerialPort::setMode(const uint8_t* data, uint16_t length)
   if (modemState == m_modemState)
     return 0U;
 
-  if (modemState != STATE_IDLE && modemState != STATE_DSTAR && modemState != STATE_DMR && modemState != STATE_YSF && modemState != STATE_P25 && modemState != STATE_NXDN && modemState != STATE_M17 && modemState != STATE_POCSAG && modemState != STATE_FM && modemState != STATE_DSTARCAL && modemState != STATE_DMRCAL && modemState != STATE_RSSICAL && modemState != STATE_LFCAL && modemState != STATE_DMRCAL1K && modemState != STATE_P25CAL1K && modemState != STATE_DMRDMO1K && modemState != STATE_NXDNCAL1K && modemState != STATE_POCSAGCAL && modemState != STATE_FMCAL10K  && modemState != STATE_FMCAL12K && modemState != STATE_FMCAL15K && modemState != STATE_FMCAL20K && modemState != STATE_FMCAL25K && modemState != STATE_FMCAL30K)
+  if (modemState != STATE_IDLE && modemState != STATE_DSTAR && modemState != STATE_DMR && modemState != STATE_YSF && modemState != STATE_P25 && modemState != STATE_NXDN && modemState != STATE_M17 && modemState != STATE_POCSAG && modemState != STATE_FM &&
+      modemState != STATE_DSTARCAL && modemState != STATE_DMRCAL && modemState != STATE_RSSICAL && modemState != STATE_LFCAL && modemState != STATE_DMRCAL1K && modemState != STATE_P25CAL1K && modemState != STATE_DMRDMO1K && modemState != STATE_NXDNCAL1K && modemState != STATE_M17CAL && modemState != STATE_POCSAGCAL &&
+      modemState != STATE_FMCAL10K  && modemState != STATE_FMCAL12K && modemState != STATE_FMCAL15K && modemState != STATE_FMCAL20K && modemState != STATE_FMCAL25K && modemState != STATE_FMCAL30K)
     return 4U;
 
 #if defined(MODE_DSTAR)
@@ -837,6 +840,9 @@ void CSerialPort::setMode(MMDVM_STATE modemState)
     case STATE_POCSAGCAL:
       DEBUG1("Mode set to POCSAG Calibrate");
       break;
+    case STATE_M17CAL:
+      DEBUG1("Mode set to M17 Calibrate");
+      break;
     default:        // STATE_IDLE
       DEBUG1("Mode set to Idle");
       break;
@@ -890,7 +896,11 @@ void CSerialPort::start()
   beginInt(1U, SERIAL_SPEED);
 
 #if defined(SERIAL_REPEATER)
-  beginInt(3U, 9600);
+  #if defined(SERIAL_REPEATER_BAUD_RATE)
+    beginInt(3U, SERIAL_REPEATER_BAUD_RATE);
+  #else
+    beginInt(3U, 9600);
+  #endif
 #endif
 #if defined(I2C_REPEATER)
   beginInt(10U, 9600);
@@ -948,20 +958,6 @@ void CSerialPort::process()
   }
 
 #if defined(SERIAL_REPEATER)
-  // Write any outgoing serial data
-  uint16_t serialSpace = m_serialData.getData();
-  if (serialSpace > 0U) {
-    int avail = availableForWriteInt(3U);
-    if (avail < serialSpace)
-      serialSpace = avail;
-
-    for (uint16_t i = 0U; i < serialSpace; i++) {
-      uint8_t c = 0U;
-      m_serialData.get(c);
-      writeInt(3U, &c, 1U);
-    }
-  }
-
   // Read any incoming serial data, and send out in batches
   int serialAvail = availableForReadInt(3U);
   if ((serialAvail > 0 && serialAvail == m_lastSerialAvail && m_lastSerialAvailCount >= MAX_SERIAL_COUNT) || (serialAvail >= MAX_SERIAL_DATA)) {
@@ -979,22 +975,6 @@ void CSerialPort::process()
     m_lastSerialAvailCount = 0U;
   }
 #endif
-
-#if defined(I2C_REPEATER)
-  // Write any outgoing serial data
-  uint16_t i2CSpace = m_i2CData.getData();
-  if (i2CSpace > 0U) {
-    int avail = availableForWriteInt(10U);
-    if (avail < i2CSpace)
-      i2CSpace = avail;
-
-    for (uint16_t i = 0U; i < i2CSpace; i++) {
-      uint8_t c = 0U;
-      m_i2CData.get(c);
-      writeInt(10U, &c, 1U);
-    }
-  }
-#endif
 }
 
 void CSerialPort::processMessage(uint8_t type, const uint8_t* buffer, uint16_t length)
@@ -1100,6 +1080,10 @@ void CSerialPort::processMessage(uint8_t type, const uint8_t* buffer, uint16_t l
       if (m_modemState == STATE_NXDNCAL1K)
         err = calNXDN.write(buffer, length);
 #endif
+#if defined(MODE_M17)
+      if (m_modemState == STATE_M17CAL)
+        err = calM17.write(buffer, length);
+#endif
 #if defined(MODE_POCSAG)
       if (m_modemState == STATE_POCSAGCAL)
         err = calPOCSAG.write(buffer, length);
@@ -1398,18 +1382,14 @@ void CSerialPort::processMessage(uint8_t type, const uint8_t* buffer, uint16_t l
       break;
 
 #if defined(SERIAL_REPEATER)
-    case MMDVM_SERIAL_DATA: {
-      for (uint16_t i = 0U; i < length; i++)
-        m_serialData.put(buffer[i]);
-      }
+    case MMDVM_SERIAL_DATA:
+      writeInt(3U, buffer, length);
       break;
 #endif
 
 #if defined(I2C_REPEATER)
-    case MMDVM_I2C_DATA: {
-      for (uint16_t i = 0U; i < length; i++)
-        m_i2CData.put(buffer[i]);
-      }
+    case MMDVM_I2C_DATA:
+      writeInt(10U, buffer, length);
       break;
 #endif
 
@@ -1795,7 +1775,7 @@ void CSerialPort::writeFMData(const uint8_t* data, uint16_t length)
     reply[2U] = (length + 4U) - 255U;
     reply[3U] = MMDVM_FM_DATA;
 
-    for (uint8_t i = 0U; i < length; i++)
+    for (uint16_t i = 0U; i < length; i++)
       reply[i + 4U] = data[i];
 
     writeInt(1U, reply, length + 4U);
@@ -1803,7 +1783,7 @@ void CSerialPort::writeFMData(const uint8_t* data, uint16_t length)
     reply[1U] = length + 3U;
     reply[2U] = MMDVM_FM_DATA;
 
-    for (uint8_t i = 0U; i < length; i++)
+    for (uint16_t i = 0U; i < length; i++)
       reply[i + 3U] = data[i];
 
     writeInt(1U, reply, length + 3U);
@@ -1828,6 +1808,25 @@ void CSerialPort::writeFMStatus(uint8_t status)
   writeInt(1U, reply, 4U);
 }
 
+void CSerialPort::writeFMRSSI(uint16_t rssi)
+{
+  if (m_modemState != STATE_FM && m_modemState != STATE_IDLE)
+    return;
+
+  if (!m_fmEnable)
+    return;
+
+  uint8_t reply[10U];
+
+  reply[0U] = MMDVM_FRAME_START;
+  reply[1U] = 5U;
+  reply[2U] = MMDVM_FM_RSSI;
+  reply[3U] = (rssi >> 8) & 0xFFU;
+  reply[4U] = (rssi >> 0) & 0xFFU;
+
+  writeInt(1U, reply, 5U);
+}
+
 void CSerialPort::writeFMEOT()
 {
   if (m_modemState != STATE_FM && m_modemState != STATE_IDLE)
@@ -1864,7 +1863,7 @@ void CSerialPort::writeAX25Data(const uint8_t* data, uint16_t length)
     reply[2U] = (length + 4U) - 255U;
     reply[3U] = MMDVM_AX25_DATA;
 
-    for (uint8_t i = 0U; i < length; i++)
+    for (uint16_t i = 0U; i < length; i++)
       reply[i + 4U] = data[i];
 
     writeInt(1U, reply, length + 4U);
@@ -1872,12 +1871,50 @@ void CSerialPort::writeAX25Data(const uint8_t* data, uint16_t length)
     reply[1U] = length + 3U;
     reply[2U] = MMDVM_AX25_DATA;
 
-    for (uint8_t i = 0U; i < length; i++)
+    for (uint16_t i = 0U; i < length; i++)
       reply[i + 3U] = data[i];
 
     writeInt(1U, reply, length + 3U);
   }
 }
+
+void CSerialPort::writeAX25DataEx(uint16_t rssi, const uint8_t* data, uint16_t length)
+{
+  if (m_modemState != STATE_FM && m_modemState != STATE_IDLE)
+    return;
+
+  if (!m_ax25Enable)
+    return;
+
+  uint8_t reply[512U];
+
+  reply[0U] = MMDVM_FRAME_START;
+
+  if (length > 250U) {
+    reply[1U] = 0U;
+    reply[2U] = (length + 6U) - 255U;
+    reply[3U] = MMDVM_AX25_DATA_EX;
+
+    reply[4U] = (rssi >> 8) & 0xFFU;
+    reply[5U] = (rssi >> 0) & 0xFFU;
+  
+    for (uint16_t i = 0U; i < length; i++)
+      reply[i + 6U] = data[i];
+
+    writeInt(1U, reply, length + 6U);
+  } else {
+    reply[1U] = length + 5U;
+    reply[2U] = MMDVM_AX25_DATA_EX;
+
+    reply[3U] = (rssi >> 8) & 0xFFU;
+    reply[4U] = (rssi >> 0) & 0xFFU;
+  
+    for (uint16_t i = 0U; i < length; i++)
+      reply[i + 5U] = data[i];
+
+    writeInt(1U, reply, length + 5U);
+  }
+}
 #endif
 
 #if defined(SERIAL_REPEATER)
@@ -2099,7 +2136,7 @@ void CSerialPort::writeDebugDump(const uint8_t* data, uint16_t length)
     reply[2U] = (length + 4U) - 255U;
     reply[3U] = MMDVM_DEBUG_DUMP;
 
-    for (uint8_t i = 0U; i < length; i++)
+    for (uint16_t i = 0U; i < length; i++)
       reply[i + 4U] = data[i];
 
     writeInt(1U, reply, length + 4U);
@@ -2107,10 +2144,9 @@ void CSerialPort::writeDebugDump(const uint8_t* data, uint16_t length)
     reply[1U] = length + 3U;
     reply[2U] = MMDVM_DEBUG_DUMP;
 
-    for (uint8_t i = 0U; i < length; i++)
+    for (uint16_t i = 0U; i < length; i++)
       reply[i + 3U] = data[i];
 
     writeInt(1U, reply, length + 3U);
   }
 }
-

SerialPort.h

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2015,2016,2017,2018,2020,2021 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2015,2016,2017,2018,2020,2021,2023 by Jonathan Naylor G4KLX
  *
  *   This program is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by
@@ -73,11 +73,13 @@ public:
 
 #if defined(MODE_AX25)
   void writeAX25Data(const uint8_t* data, uint16_t length);
+  void writeAX25DataEx(uint16_t rssi, const uint8_t* data, uint16_t length);
 #endif
 
 #if defined(MODE_FM)
   void writeFMData(const uint8_t* data, uint16_t length);
   void writeFMStatus(uint8_t status);
+  void writeFMRSSI(uint16_t rssi);
   void writeFMEOT();
 #endif
 
@@ -104,10 +106,8 @@ private:
   uint16_t  m_ptr;
   uint16_t  m_len;
   bool      m_debug;
-  CRingBuffer<uint8_t> m_serialData;
   int       m_lastSerialAvail;
   uint16_t  m_lastSerialAvailCount;
-  CRingBuffer<uint8_t> m_i2CData;
 
   void    sendACK(uint8_t type);
   void    sendNAK(uint8_t type, uint8_t err);

SerialSTM.cpp

@@ -332,7 +332,7 @@ int CSerialPort::availableForReadInt(uint8_t n)
    switch (n) {
       case 1U:
          #if defined(STM32F4_DISCOVERY) || defined(STM32F7_NUCLEO)
-         return m_USART3.availble();//AvailUSART3();
+         return m_USART3.available();//AvailUSART3();
          #elif defined(STM32F4_PI) || defined(STM32F4_F4M) || defined(STM32F722_PI) || defined(STM32F722_F7M) || defined(STM32F722_RPT_HAT) || defined(STM32F4_DVM) || defined(STM32F7_DVM) || defined(STM32F4_EDA_405) || defined(STM32F4_EDA_446)
          return m_USART1.available();//AvailUSART1();
          #elif defined(STM32F4_NUCLEO) || defined(STM32F4_RPT_HAT_TGO)

SerialSTM_CMSIS.cpp

@@ -1,170 +0,0 @@
-/*
- *   Copyright (C) 2017 by Wojciech Krutnik N0CALL
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include "Config.h"
-#include "Globals.h"
-#include "RingBuff.h"
-
-#include "SerialPort.h"
-
-/*
-Pin definitions (configuration in IOSTM_CMSIS.c):
-
-- Host communication:
-USART1 - TXD PA9  - RXD PA10
-
-*/
-
-
-#if defined(STM32F1)
-
-// BaudRate calculator macro
-// source: STM32 HAL Library (stm32f1xx_hal_usart.h)
-#define USART_DIV(__PCLK__, __BAUD__)     (((__PCLK__)*25)/(4*(__BAUD__)))
-#define USART_DIVMANT(__PCLK__, __BAUD__) (USART_DIV((__PCLK__), (__BAUD__))/100)
-#define USART_DIVFRAQ(__PCLK__, __BAUD__) (((USART_DIV((__PCLK__), (__BAUD__)) - (USART_DIVMANT((__PCLK__), (__BAUD__)) * 100)) * 16 + 50) / 100)
-#define USART_BRR(__PCLK__, __BAUD__)     ((USART_DIVMANT((__PCLK__), (__BAUD__)) << 4)|(USART_DIVFRAQ((__PCLK__), (__BAUD__)) & 0x0F))
-
-#define USART_BUFFER_SIZE 256U
-DECLARE_RINGBUFFER_TYPE(USARTBuffer, USART_BUFFER_SIZE);
-
-/* ************* USART1 ***************** */
-static volatile USARTBuffer_t txBuffer1={.size=USART_BUFFER_SIZE};
-static volatile USARTBuffer_t rxBuffer1={.size=USART_BUFFER_SIZE};
-
-
-extern "C" {
-  bitband_t txe = (bitband_t)BITBAND_PERIPH(&USART1->SR, USART_SR_TXE_Pos);
-  bitband_t rxne = (bitband_t)BITBAND_PERIPH(&USART1->SR, USART_SR_RXNE_Pos);
-  bitband_t txeie = (bitband_t)BITBAND_PERIPH(&USART1->CR1, USART_CR1_TXEIE_Pos);
-  
-  RAMFUNC void USART1_IRQHandler()
-  {
-    /* Transmitting data */
-    if(*txe){
-      if(!(RINGBUFF_EMPTY(txBuffer1))){
-        USART1->DR = RINGBUFF_READ(txBuffer1);
-      }else{  /* Buffer empty */
-        *txeie = 0;  /* Don't send further data */
-      }
-    }
-
-    /* Receiving data */
-    if(*rxne){
-      RINGBUFF_WRITE(rxBuffer1, USART1->DR);
-    }
-  }
-}
-
-
-void USART1Init(int speed)
-{
-  RCC->APB2ENR |= RCC_APB2ENR_USART1EN;
-  
-  USART1->BRR = USART_BRR(72000000UL, speed);
-  
-  USART1->CR1 = USART_CR1_UE | USART_CR1_TE |
-                USART_CR1_RE | USART_CR1_RXNEIE;  // Enable USART and RX interrupt
-  NVIC_EnableIRQ(USART1_IRQn);
-}
-
-RAMFUNC void USART1TxData(const uint8_t* data, uint16_t length)
-{
-  NVIC_DisableIRQ(USART1_IRQn);
-  
-  /* Check remaining space in buffer */
-  if(RINGBUFF_COUNT(txBuffer1) + length > RINGBUFF_SIZE(txBuffer1)){
-    NVIC_EnableIRQ(USART1_IRQn);
-    return;
-  }
-  
-  /* Append data to buffer  */
-  while(length--){
-    RINGBUFF_WRITE(txBuffer1, *(data++));
-  }
-
-  /* Start sending data */
-  USART1->CR1 |= USART_CR1_TXEIE;
-
-  NVIC_EnableIRQ(USART1_IRQn);
-}
-
-
-/////////////////////////////////////////////////////////////////
-
-void CSerialPort::beginInt(uint8_t n, int speed)
-{
-  switch (n) {
-    case 1U:
-      USART1Init(speed);
-      break;
-  default:
-    break;
-  }
-}
-
-int CSerialPort::availableForReadInt(uint8_t n)
-{
-  switch (n) {
-    case 1U:
-      return !RINGBUFF_EMPTY(rxBuffer1);
-    default:
-      return false;
-  }
-}
-
-int CSerialPort::availableForWriteInt(uint8_t n)
-{
-  switch (n) {
-    case 1U:
-      return !RINGBUFF_FULL(txBuffer1);
-    default:
-      return false;
-  }
-}
-
-uint8_t CSerialPort::readInt(uint8_t n)
-{
-  switch (n) {
-    case 1U:
-      return RINGBUFF_READ(rxBuffer1);
-    default:
-      return 0U;
-  }
-}
-
-void CSerialPort::writeInt(uint8_t n, const uint8_t* data, uint16_t length, bool flush)
-{
-  bitband_t tc = (bitband_t)BITBAND_PERIPH(&USART1->SR, USART_SR_TC_Pos);
-  
-  switch (n) {
-    case 1U:
-      USART1TxData(data, length);
-      *tc = 0;
-      
-      if (flush) {
-        while (!RINGBUFF_EMPTY(txBuffer1) || !tc)
-          ;
-      }
-      break;
-    default:
-      break;
-  }
-}
-
-#endif

SerialTeensy.cpp

@@ -1,4 +1,6 @@
 /*
+ *   Copyright (C) 2017 by Chris Huitema
+ *
  *   This program is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by
  *   the Free Software Foundation; either version 2 of the License, or

Utils.h

@@ -23,9 +23,6 @@
 #include "stm32f4xx.h"
 #elif defined(STM32F7XX)
 #include "stm32f7xx.h"
-#elif defined(STM32F105xC)
-#include "stm32f1xx.h"
-#include <cstddef>
 #else
 #include <Arduino.h>
 #endif

Version.h

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2020,2021 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2020,2021,2022,2023 by Jonathan Naylor G4KLX
  *
  *   This program is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by
@@ -19,7 +19,7 @@
 #if !defined(VERSION_H)
 #define  VERSION_H
 
-#define VERSION "20210919"
+#define VERSION "20230802"
 
 #endif
 

YSFTX.cpp

@@ -166,7 +166,7 @@ void CYSFTX::writeByte(uint8_t c)
 
 void CYSFTX::writeSilence()
 {
-  q15_t inBuffer[4U] = {0x00U, 0x00U, 0x00U, 0x00U};
+  q15_t inBuffer[4U] = {0, 0, 0, 0};
   q15_t outBuffer[YSF_RADIO_SYMBOL_LENGTH * 4U];
 
   ::arm_fir_interpolate_q15(&m_modFilter, inBuffer, outBuffer, 4U);

mmdvmmenu.sh

@@ -1,98 +0,0 @@
-#!/bin/bash
-
-###############################################################################
-#
-# mmdvmmenu.sh
-#
-# Copyright (C) 2016 by Paul Nannery KC2VRJ
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-#
-###############################################################################
-#
-# On a Linux based system, such as a Raspberry Pi, this script will perform
-# Modification of the Config.h file for most options. It makes a Back up when
-# you start the script if none is present. You must recompile and load firmware
-# onto the Arduino Due if changes are made.
-#
-###############################################################################
-#
-#                              CONFIGURATION
-#
-# Location of Config.h
-conf=Config.h
-#Location of backup file
-confbak=Config.h.bak
-
-################################################################################
-#
-# Do not edit below here
-#
-###############################################################################
-
-
-
-# Check for backup file and make one if not present
-
-if [ ! -f $confbak ];then
-
-cp -f $conf $confbak
-
-fi
-
-while :
-do
-    clear
-    cat<<EOF
-    ==============================================================
-                       MMDVM Configuration Options
-    --------------------------------------------------------------
-    Please enter your choice:
-
-    (1) Enable 12.000 MHZ Clock
-    (2) Enable 12.288 MHZ Clock
-    (3) Enable 14.400 MHz Clock
-    (4) Enable 19.200 MHz Clock
-    (5) Use the COS to lockout the modem
-    (6) Use pins to output the current mode
-    (7) Use layout for the PAPA board
-    (8) Use layout for ZUM V1.0 and V1.0.1 boards
-    (9) Use layout for SP8NTH board
-    (0) Use modem as display driver
-    (A) Return to Default
-
-                         (Q)uit
-    ---------------------------------------------------------------
-EOF
-    read -n1 -s
-    case "$REPLY" in
-    "1")  sed -e 's/\/\/ #define EXTERNAL_OSC 12000000/#define EXTERNAL_OSC 12000000/'     $conf > $conf.tmp && mv -f $conf.tmp $conf && echo "12.000 MHz clock enabled";;
-    "2")  sed -e 's/\/\/ #define EXTERNAL_OSC 12288000/#define EXTERNAL_OSC 12288000/'     $conf > $conf.tmp && mv -f $conf.tmp $conf && echo "12.288 MHz clock enabled";;
-    "3")  sed -e 's/\/\/ #define EXTERNAL_OSC 14400000/#define EXTERNAL_OSC 14400000/'     $conf > $conf.tmp && mv -f $conf.tmp $conf && echo "14.400 MHz clock enabled";;
-    "4")  sed -e 's/\/\/ #define EXTERNAL_OSC 19200000/#define EXTERNAL_OSC 19200000/'     $conf > $conf.tmp && mv -f $conf.tmp $conf && echo "19.200 MHz clock enabled";;
-    "5")  sed -e 's/\/\/ #define USE_COS_AS_LOCKOUT /#define USE_COS_AS_LOCKOUT/'          $conf > $conf.tmp && mv -f $conf.tmp $conf && echo "COS as Lockout enabled";;
-    "6")  sed -e 's/\/\/ #define MODE_LEDS/#define MODE_LEDS/'             $conf > $conf.tmp && mv -f $conf.tmp $conf && echo "Mode pins enabled";;
-    "7")  sed -e 's/\/\/ #define ARDUINO_DUE_PAPA/#define ARDUINO_DUE_PAPA/'               $conf > $conf.tmp && mv -f $conf.tmp $conf && echo "Layout for the PAPA board enabled";;
-    "8")  sed -e 's/\/\/ #define ARDUINO_DUE_ZUM_V10/#define ARDUINO_DUE_ZUM_V10/'         $conf > $conf.tmp && mv -f $conf.tmp $conf && echo "Layout for ZUM V1.0 and V1.0.1 boards enabled";;
-    "9")  sed -e 's/\/\/ #define ARDUINO_DUE_NTH/#define ARDUINO_DUE_NTH/'                 $conf > $conf.tmp && mv -f $conf.tmp $conf && echo "Layout for SP8NTH board enabled";;
-    "0")  sed -e 's/\/\/ #define SERIAL_REPEATER/#define SERIAL_REPEATER/'                 $conf > $conf.tmp && mv -f $conf.tmp $conf && echo "Modem display driver enabled";;
-    "A")  mv -f $confbak $conf ;;
-    "a")  mv -f $confbak $conf ;;
-    "Q")  echo "If any changes are made you need to (re-)upload the firmware to MMDVM" && exit;;
-    "q")  echo "If any changes are made you need to (re-)upload the firmware to MMDVM" && exit;;
-     * )  echo "invalid option"     ;;
-    esac
-    sleep 1
-done

pins/pins_f4_stm32eda.h

@@ -33,7 +33,7 @@ DSTAR    PB6    output
 DMR      PB5    output
 YSF      PB7    output
 POCSAG   PC10   output
-FM       PC11   output
+FM       PB14   output
 
 RX       PB0    analog input
 RSSI     PB1    analog input
@@ -83,9 +83,9 @@ EXT_CLK  PA15   input
 #define PORT_POCSAG       GPIOC
 #define RCC_Per_POCSAG    RCC_AHB1Periph_GPIOC
 
-#define PIN_FM            GPIO_Pin_11
-#define PORT_FM           GPIOC
-#define RCC_Per_FM        RCC_AHB1Periph_GPIOC
+#define PIN_FM            GPIO_Pin_14
+#define PORT_FM           GPIOB
+#define RCC_Per_FM        RCC_AHB1Periph_GPIOB
 
 #define PIN_EXT_CLK       GPIO_Pin_15
 #define SRC_EXT_CLK       GPIO_PinSource15

pins/pins_f7_stm32dvm_v5.h

@@ -20,7 +20,7 @@
 #define _PINS_F7_STM32DVM_V5_H
 
 /*
-Pin definitions for STM32F4 STM32-DVM rev 5 Board:
+Pin definitions for STM32F7 STM32-DVM rev 5 Board:
 
 COS      PB13   input
 PTT      PB12   output
@@ -33,6 +33,7 @@ DSTAR    PB6    output
 DMR      PB5    output
 YSF      PB7    output
 POCSAG   PC10   output (Not Valid)
+FM       PB14   output
 
 RX       PB0    analog input
 RSSI     PB1    analog input
@@ -45,7 +46,6 @@ EXT_CLK  PA15   input
 #define PORT_COS          GPIOB
 #define RCC_Per_COS       RCC_AHB1Periph_GPIOB
 
-
 #define PIN_PTT           GPIO_Pin_12
 #define PORT_PTT          GPIOB
 #define RCC_Per_PTT       RCC_AHB1Periph_GPIOB

system_stm32f1xx/gcc.ld

@@ -1,187 +0,0 @@
-/* Linker script to configure memory regions.
- * STM32F105RB
- */
-MEMORY
-{
-  FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 128K
-  RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
-}
-
-/* Linker script to place sections and symbol values. Should be used together
- * with other linker script that defines memory regions FLASH and RAM.
- * It references following symbols, which must be defined in code:
- *   Reset_Handler : Entry of reset handler
- *
- * It defines following symbols, which code can use without definition:
- *   __exidx_start
- *   __exidx_end
- *   __copy_table_start__
- *   __copy_table_end__
- *   __zero_table_start__
- *   __zero_table_end__
- *   __etext
- *   __data_start__
- *   __preinit_array_start
- *   __preinit_array_end
- *   __init_array_start
- *   __init_array_end
- *   __fini_array_start
- *   __fini_array_end
- *   __data_end__
- *   __bss_start__
- *   __bss_end__
- *   __end__
- *   end
- *   __HeapLimit
- *   __StackLimit
- *   __StackTop
- *   __stack
- */
-ENTRY(Reset_Handler)
-
-SECTIONS
-{
-	.text :
-	{
-		KEEP(*(.isr_vector))
-		*(.text*)
-
-		KEEP(*(.init))
-		KEEP(*(.fini))
-
-		/* .ctors */
-		*crtbegin.o(.ctors)
-		*crtbegin?.o(.ctors)
-		*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
-		*(SORT(.ctors.*))
-		*(.ctors)
-
-		/* .dtors */
- 		*crtbegin.o(.dtors)
- 		*crtbegin?.o(.dtors)
- 		*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
- 		*(SORT(.dtors.*))
- 		*(.dtors)
-
-		*(.rodata*)
-
-		KEEP(*(.eh_frame*))
-	} > FLASH
-
-	.ARM.extab :
-	{
-		*(.ARM.extab* .gnu.linkonce.armextab.*)
-	} > FLASH
-
-	__exidx_start = .;
-	.ARM.exidx :
-	{
-		*(.ARM.exidx* .gnu.linkonce.armexidx.*)
-	} > FLASH
-	__exidx_end = .;
-
-	/* To copy multiple ROM to RAM sections,
-	 * uncomment .copy.table section and,
-	 * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */
-	/*
-	.copy.table :
-	{
-		. = ALIGN(4);
-		__copy_table_start__ = .;
-		LONG (__etext)
-		LONG (__data_start__)
-		LONG (__data_end__ - __data_start__)
-		LONG (__etext2)
-		LONG (__data2_start__)
-		LONG (__data2_end__ - __data2_start__)
-		__copy_table_end__ = .;
-	} > FLASH
-	*/
-
-	/* To clear multiple BSS sections,
-	 * uncomment .zero.table section and,
-	 * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */
-	/*
-	.zero.table :
-	{
-		. = ALIGN(4);
-		__zero_table_start__ = .;
-		LONG (__bss_start__)
-		LONG (__bss_end__ - __bss_start__)
-		LONG (__bss2_start__)
-		LONG (__bss2_end__ - __bss2_start__)
-		__zero_table_end__ = .;
-	} > FLASH
-	*/
-
-	__etext = .;
-
-	.data : AT (__etext)
-	{
-		__data_start__ = .;
-		*(vtable)
-		*(.data*)
-
-		. = ALIGN(4);
-		/* preinit data */
-		PROVIDE_HIDDEN (__preinit_array_start = .);
-		KEEP(*(.preinit_array))
-		PROVIDE_HIDDEN (__preinit_array_end = .);
-
-		. = ALIGN(4);
-		/* init data */
-		PROVIDE_HIDDEN (__init_array_start = .);
-		KEEP(*(SORT(.init_array.*)))
-		KEEP(*(.init_array))
-		PROVIDE_HIDDEN (__init_array_end = .);
-
-
-		. = ALIGN(4);
-		/* finit data */
-		PROVIDE_HIDDEN (__fini_array_start = .);
-		KEEP(*(SORT(.fini_array.*)))
-		KEEP(*(.fini_array))
-		PROVIDE_HIDDEN (__fini_array_end = .);
-
-		KEEP(*(.jcr*))
-		. = ALIGN(4);
-		/* All data end */
-		__data_end__ = .;
-
-	} > RAM
-
-	.bss :
-	{
-		. = ALIGN(4);
-		__bss_start__ = .;
-		*(.bss*)
-		*(COMMON)
-		. = ALIGN(4);
-		__bss_end__ = .;
-	} > RAM
-
-	.heap (COPY):
-	{
-		__end__ = .;
-		PROVIDE(end = .);
-		*(.heap*)
-		__HeapLimit = .;
-	} > RAM
-
-	/* .stack_dummy section doesn't contains any symbols. It is only
-	 * used for linker to calculate size of stack sections, and assign
-	 * values to stack symbols later */
-	.stack_dummy (COPY):
-	{
-		*(.stack*)
-	} > RAM
-
-	/* Set stack top to end of RAM, and stack limit move down by
-	 * size of stack_dummy section */
-	__StackTop = ORIGIN(RAM) + LENGTH(RAM);
-	__StackLimit = __StackTop - SIZEOF(.stack_dummy);
-	PROVIDE(__stack = __StackTop);
-
-	/* Check if data + heap + stack exceeds RAM limit */
-	ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
-}

system_stm32f1xx/startup_stm32f105xc.S

@@ -1,427 +0,0 @@
-/* File: startup_ARMCM3.S
- * Purpose: startup file for Cortex-M3 devices. Should use with
- *   GCC for ARM Embedded Processors
- * Version: V2.0
- * Date: 16 August 2013
- */
-/* Copyright (c) 2011 - 2013 ARM LIMITED
-
-   All rights reserved.
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are met:
-   - Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-   - Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in the
-     documentation and/or other materials provided with the distribution.
-   - Neither the name of ARM nor the names of its contributors may be used
-     to endorse or promote products derived from this software without
-     specific prior written permission.
-   *
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
-   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-   POSSIBILITY OF SUCH DAMAGE.
-   ---------------------------------------------------------------------------*/
-#if defined(STM32F105xC)
-
-	.syntax	unified
-	.arch	armv7-m
-
-	.section .stack
-	.align	3
-#ifdef __STACK_SIZE
-	.equ	Stack_Size, __STACK_SIZE
-#else
-	.equ	Stack_Size, 0xc00
-#endif
-	.globl	__StackTop
-	.globl	__StackLimit
-__StackLimit:
-	.space	Stack_Size
-	.size	__StackLimit, . - __StackLimit
-__StackTop:
-	.size	__StackTop, . - __StackTop
-
-	.section .heap
-	.align	3
-#ifdef __HEAP_SIZE
-	.equ	Heap_Size, __HEAP_SIZE
-#else
-	.equ	Heap_Size, 0
-#endif
-	.globl	__HeapBase
-	.globl	__HeapLimit
-__HeapBase:
-	.if	Heap_Size
-	.space	Heap_Size
-	.endif
-	.size	__HeapBase, . - __HeapBase
-__HeapLimit:
-	.size	__HeapLimit, . - __HeapLimit
-
-
-.equ  BootRAM, 0xF1E0F85F
-
-	.section .isr_vector
-	.align	2
-	.globl	__isr_vector
-__isr_vector:
-	.long	__StackTop            /* Top of Stack */
-	.long	Reset_Handler         /* Reset Handler */
-	.long	NMI_Handler           /* NMI Handler */
-	.long	HardFault_Handler     /* Hard Fault Handler */
-	.long	MemManage_Handler     /* MPU Fault Handler */
-	.long	BusFault_Handler      /* Bus Fault Handler */
-	.long	UsageFault_Handler    /* Usage Fault Handler */
-	.long	0                     /* Reserved */
-	.long	0                     /* Reserved */
-	.long	0                     /* Reserved */
-	.long	0                     /* Reserved */
-	.long	SVC_Handler           /* SVCall Handler */
-	.long	DebugMon_Handler      /* Debug Monitor Handler */
-	.long	0                     /* Reserved */
-	.long	PendSV_Handler        /* PendSV Handler */
-	.long	SysTick_Handler       /* SysTick Handler */
-	
-	/* External interrupts */
-  .long WWDG_IRQHandler
-  .long PVD_IRQHandler
-  .long TAMPER_IRQHandler
-  .long RTC_IRQHandler
-  .long FLASH_IRQHandler
-  .long RCC_IRQHandler
-  .long EXTI0_IRQHandler
-  .long EXTI1_IRQHandler
-  .long EXTI2_IRQHandler
-  .long EXTI3_IRQHandler
-  .long EXTI4_IRQHandler
-  .long DMA1_Channel1_IRQHandler
-  .long DMA1_Channel2_IRQHandler
-  .long DMA1_Channel3_IRQHandler
-  .long DMA1_Channel4_IRQHandler
-  .long DMA1_Channel5_IRQHandler
-  .long DMA1_Channel6_IRQHandler
-  .long DMA1_Channel7_IRQHandler
-  .long ADC1_2_IRQHandler
-  .long CAN1_TX_IRQHandler
-  .long CAN1_RX0_IRQHandler
-  .long CAN1_RX1_IRQHandler
-  .long CAN1_SCE_IRQHandler
-  .long EXTI9_5_IRQHandler
-  .long TIM1_BRK_IRQHandler
-  .long TIM1_UP_IRQHandler
-  .long TIM1_TRG_COM_IRQHandler
-  .long TIM1_CC_IRQHandler
-  .long TIM2_IRQHandler
-  .long TIM3_IRQHandler
-  .long TIM4_IRQHandler
-  .long I2C1_EV_IRQHandler
-  .long I2C1_ER_IRQHandler
-  .long I2C2_EV_IRQHandler
-  .long I2C2_ER_IRQHandler
-  .long SPI1_IRQHandler
-  .long SPI2_IRQHandler
-  .long USART1_IRQHandler
-  .long USART2_IRQHandler
-  .long USART3_IRQHandler
-  .long EXTI15_10_IRQHandler
-  .long RTC_Alarm_IRQHandler
-  .long OTG_FS_WKUP_IRQHandler
-  .long 0
-  .long 0
-  .long 0
-  .long 0
-  .long 0
-  .long 0
-  .long 0
-  .long TIM5_IRQHandler
-  .long SPI3_IRQHandler
-  .long UART4_IRQHandler
-  .long UART5_IRQHandler
-  .long TIM6_IRQHandler
-  .long TIM7_IRQHandler
-  .long DMA2_Channel1_IRQHandler
-  .long DMA2_Channel2_IRQHandler
-  .long DMA2_Channel3_IRQHandler
-  .long DMA2_Channel4_IRQHandler
-  .long DMA2_Channel5_IRQHandler
-  .long 0
-  .long 0
-  .long CAN2_TX_IRQHandler
-  .long CAN2_RX0_IRQHandler
-  .long CAN2_RX1_IRQHandler
-  .long CAN2_SCE_IRQHandler
-  .long OTG_FS_IRQHandler
-  .long 0
-  .long 0
-  .long 0
-  .long 0
-  .long 0
-  .long 0
-  .long 0
-  .long 0
-  .long 0
-  .long 0
-  .long 0
-  .long 0
-  .long 0
-  .long 0
-  .long 0
-  .long 0
-  .long 0
-  .long 0
-  .long 0
-  .long 0
-  .long 0
-  .long 0
-  .long 0
-  .long 0
-  .long 0
-  .long 0
-  .long 0
-  .long 0
-  .long 0
-  .long 0
-  .long 0
-  .long 0
-  .long 0
-  .long 0
-  .long 0
-  .long 0
-  .long BootRAM     /* @0x1E0. This is for boot in RAM mode for
-                         STM32F10x Connectivity line Devices. */
-
-	.size	__isr_vector, . - __isr_vector
-
-	.text
-	.thumb
-	.thumb_func
-	.align	2
-	.globl	Reset_Handler
-	.type	Reset_Handler, %function
-Reset_Handler:
-/*  Firstly it copies data from read only memory to RAM. There are two schemes
- *  to copy. One can copy more than one sections. Another can only copy
- *  one section.  The former scheme needs more instructions and read-only
- *  data to implement than the latter.
- *  Macro __STARTUP_COPY_MULTIPLE is used to choose between two schemes.  */
-
-#ifdef __STARTUP_COPY_MULTIPLE
-/*  Multiple sections scheme.
- *
- *  Between symbol address __copy_table_start__ and __copy_table_end__,
- *  there are array of triplets, each of which specify:
- *    offset 0: LMA of start of a section to copy from
- *    offset 4: VMA of start of a section to copy to
- *    offset 8: size of the section to copy. Must be multiply of 4
- *
- *  All addresses must be aligned to 4 bytes boundary.
- */
-	ldr	r4, =__copy_table_start__
-	ldr	r5, =__copy_table_end__
-
-.L_loop0:
-	cmp	r4, r5
-	bge	.L_loop0_done
-	ldr	r1, [r4]
-	ldr	r2, [r4, #4]
-	ldr	r3, [r4, #8]
-
-.L_loop0_0:
-	subs	r3, #4
-	ittt	ge
-	ldrge	r0, [r1, r3]
-	strge	r0, [r2, r3]
-	bge	.L_loop0_0
-
-	adds	r4, #12
-	b	.L_loop0
-
-.L_loop0_done:
-#else
-/*  Single section scheme.
- *
- *  The ranges of copy from/to are specified by following symbols
- *    __etext: LMA of start of the section to copy from. Usually end of text
- *    __data_start__: VMA of start of the section to copy to
- *    __data_end__: VMA of end of the section to copy to
- *
- *  All addresses must be aligned to 4 bytes boundary.
- */
-	ldr	r1, =__etext
-	ldr	r2, =__data_start__
-	ldr	r3, =__data_end__
-
-.L_loop1:
-	cmp	r2, r3
-	ittt	lt
-	ldrlt	r0, [r1], #4
-	strlt	r0, [r2], #4
-	blt	.L_loop1
-#endif /*__STARTUP_COPY_MULTIPLE */
-
-/*  This part of work usually is done in C library startup code. Otherwise,
- *  define this macro to enable it in this startup.
- *
- *  There are two schemes too. One can clear multiple BSS sections. Another
- *  can only clear one section. The former is more size expensive than the
- *  latter.
- *
- *  Define macro __STARTUP_CLEAR_BSS_MULTIPLE to choose the former.
- *  Otherwise efine macro __STARTUP_CLEAR_BSS to choose the later.
- */
-#ifdef __STARTUP_CLEAR_BSS_MULTIPLE
-/*  Multiple sections scheme.
- *
- *  Between symbol address __copy_table_start__ and __copy_table_end__,
- *  there are array of tuples specifying:
- *    offset 0: Start of a BSS section
- *    offset 4: Size of this BSS section. Must be multiply of 4
- */
-	ldr	r3, =__zero_table_start__
-	ldr	r4, =__zero_table_end__
-
-.L_loop2:
-	cmp	r3, r4
-	bge	.L_loop2_done
-	ldr	r1, [r3]
-	ldr	r2, [r3, #4]
-	movs	r0, 0
-
-.L_loop2_0:
-	subs	r2, #4
-	itt	ge
-	strge	r0, [r1, r2]
-	bge	.L_loop2_0
-
-	adds	r3, #8
-	b	.L_loop2
-.L_loop2_done:
-#elif defined (__STARTUP_CLEAR_BSS)
-/*  Single BSS section scheme.
- *
- *  The BSS section is specified by following symbols
- *    __bss_start__: start of the BSS section.
- *    __bss_end__: end of the BSS section.
- *
- *  Both addresses must be aligned to 4 bytes boundary.
- */
-	ldr	r1, =__bss_start__
-	ldr	r2, =__bss_end__
-
-	movs	r0, 0
-.L_loop3:
-	cmp	r1, r2
-	itt	lt
-	strlt	r0, [r1], #4
-	blt	.L_loop3
-#endif /* __STARTUP_CLEAR_BSS_MULTIPLE || __STARTUP_CLEAR_BSS */
-
-#ifndef __NO_SYSTEM_INIT
-	bl	SystemInit
-#endif
-
-#ifndef __START
-#define __START _start
-#endif
-	bl	__START
-
-	.pool
-	.size	Reset_Handler, . - Reset_Handler
-
-	.align	1
-	.thumb_func
-	.weak	Default_Handler
-	.type	Default_Handler, %function
-Default_Handler:
-	b	.
-	.size	Default_Handler, . - Default_Handler
-
-/*    Macro to define default handlers. Default handler
- *    will be weak symbol and just dead loops. They can be
- *    overwritten by other handlers */
-	.macro	def_irq_handler	handler_name
-	.weak	\handler_name
-	.set	\handler_name, Default_Handler
-	.endm
-
-	def_irq_handler	NMI_Handler
-	def_irq_handler	HardFault_Handler
-	def_irq_handler	MemManage_Handler
-	def_irq_handler	BusFault_Handler
-	def_irq_handler	UsageFault_Handler
-	def_irq_handler	SVC_Handler
-	def_irq_handler	DebugMon_Handler
-	def_irq_handler	PendSV_Handler
-	def_irq_handler	SysTick_Handler
-  def_irq_handler WWDG_IRQHandler
-  def_irq_handler PVD_IRQHandler
-  def_irq_handler TAMPER_IRQHandler
-  def_irq_handler RTC_IRQHandler
-  def_irq_handler FLASH_IRQHandler
-  def_irq_handler RCC_IRQHandler
-  def_irq_handler EXTI0_IRQHandler
-  def_irq_handler EXTI1_IRQHandler
-  def_irq_handler EXTI2_IRQHandler
-  def_irq_handler EXTI3_IRQHandler
-  def_irq_handler EXTI4_IRQHandler
-  def_irq_handler DMA1_Channel1_IRQHandler
-  def_irq_handler DMA1_Channel2_IRQHandler
-  def_irq_handler DMA1_Channel3_IRQHandler
-  def_irq_handler DMA1_Channel4_IRQHandler
-  def_irq_handler DMA1_Channel5_IRQHandler
-  def_irq_handler DMA1_Channel6_IRQHandler
-  def_irq_handler DMA1_Channel7_IRQHandler
-  def_irq_handler ADC1_2_IRQHandler
-  def_irq_handler CAN1_TX_IRQHandler
-  def_irq_handler CAN1_RX0_IRQHandler
-  def_irq_handler CAN1_RX1_IRQHandler
-  def_irq_handler CAN1_SCE_IRQHandler
-  def_irq_handler EXTI9_5_IRQHandler
-  def_irq_handler TIM1_BRK_IRQHandler
-  def_irq_handler TIM1_UP_IRQHandler
-  def_irq_handler TIM1_TRG_COM_IRQHandler
-  def_irq_handler TIM1_CC_IRQHandler
-  def_irq_handler TIM2_IRQHandler
-  def_irq_handler TIM3_IRQHandler
-  def_irq_handler TIM4_IRQHandler
-  def_irq_handler I2C1_EV_IRQHandler
-  def_irq_handler I2C1_ER_IRQHandler
-  def_irq_handler I2C2_EV_IRQHandler
-  def_irq_handler I2C2_ER_IRQHandler
-  def_irq_handler SPI1_IRQHandler
-  def_irq_handler SPI2_IRQHandler
-  def_irq_handler USART1_IRQHandler
-  def_irq_handler USART2_IRQHandler
-  def_irq_handler USART3_IRQHandler
-  def_irq_handler EXTI15_10_IRQHandler
-  def_irq_handler RTC_Alarm_IRQHandler
-  def_irq_handler OTG_FS_WKUP_IRQHandler
-  def_irq_handler TIM5_IRQHandler
-  def_irq_handler SPI3_IRQHandler
-  def_irq_handler UART4_IRQHandler
-  def_irq_handler UART5_IRQHandler
-  def_irq_handler TIM6_IRQHandler
-  def_irq_handler TIM7_IRQHandler
-  def_irq_handler DMA2_Channel1_IRQHandler
-  def_irq_handler DMA2_Channel2_IRQHandler
-  def_irq_handler DMA2_Channel3_IRQHandler
-  def_irq_handler DMA2_Channel4_IRQHandler
-  def_irq_handler DMA2_Channel5_IRQHandler
-  def_irq_handler CAN2_TX_IRQHandler
-  def_irq_handler CAN2_RX0_IRQHandler
-  def_irq_handler CAN2_RX1_IRQHandler
-  def_irq_handler CAN2_SCE_IRQHandler
-  def_irq_handler OTG_FS_IRQHandler
-
-	.end
-	
-#endif

system_stm32f1xx/system_stm32f1xx.c

@@ -1,227 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    system_stm32f1xx.c
-  * @author  MCD Application Team, Wojciech Krutnik
-  * @version V2.2.2
-  * @date    26-June-2015
-  * @brief   CMSIS Cortex-M0 Device Peripheral Access Layer System Source File.
-  *
-  * 1. This file provides two functions and one global variable to be called from
-  *    user application:
-  *      - SystemInit(): This function is called at startup just after reset and 
-  *                      before branch to main program. This call is made inside
-  *                      the "startup_stm32f1xx.s" file.
-  *
-  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
-  *                                  by the user application to setup the SysTick
-  *                                  timer or configure other parameters.
-  *
-  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
-  *                                 be called whenever the core clock is changed
-  *                                 during program execution.
-  *
-  * 2. After each device reset the HSI (8 MHz) is used as system clock source.
-  *    Then SystemInit() function is called, in "startup_stm32f1xx.s" file, to
-  *    configure the system clock before to branch to main program.
-  *
-  * 3. This file configures the system clock and flash as follows:
-  *=============================================================================
-  *                         Supported STM32F1xx device
-  *-----------------------------------------------------------------------------
-  *        System Clock source                    | PLL
-  *-----------------------------------------------------------------------------
-  *        SYSCLK                                 | 72MHz
-  *-----------------------------------------------------------------------------
-  *        HCLK                                   | 72Mhz
-  *-----------------------------------------------------------------------------
-  *        PCLK1                                  | 36MHz
-  *-----------------------------------------------------------------------------
-  *        PCLK2                                  | 72MHz
-  *-----------------------------------------------------------------------------
-  *        AHB Prescaler                          | 1
-  *-----------------------------------------------------------------------------
-  *        APB1 Prescaler                         | 2
-  *-----------------------------------------------------------------------------
-  *        APB2 Prescaler                         | 1
-  *-----------------------------------------------------------------------------
-  *        PLLSRC                                 | HSE/1
-  *-----------------------------------------------------------------------------
-  *        PLLMUL                                 | 9
-  *-----------------------------------------------------------------------------
-  *        HSE                                    | 8MHz
-  *-----------------------------------------------------------------------------
-  *        Flash Latency(WS)                      | 2
-  *-----------------------------------------------------------------------------
-  *        Prefetch Buffer                        | ON
-  *-----------------------------------------------------------------------------
-  *=============================================================================
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */
-#if defined(STM32F105xC)
-
-/** @addtogroup CMSIS
-  * @{
-  */
-
-/** @addtogroup stm32f1xx_system
-  * @{
-  */
-
-/** @addtogroup STM32F1xx_System_Private_Includes
-  * @{
-  */
-
-#include "stm32f1xx.h"
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F1xx_System_Private_TypesDefinitions
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F1xx_System_Private_Defines
-  * @{
-  */
-#if !defined  (HSE_VALUE) 
-  #define HSE_VALUE    ((uint32_t)8000000) /*!< Default value of the External oscillator in Hz.
-                                                This value can be provided and adapted by the user application. */
-#endif /* HSE_VALUE */
-
-#if !defined  (HSI_VALUE)
-  #define HSI_VALUE    ((uint32_t)8000000) /*!< Default value of the Internal oscillator in Hz.
-                                                This value can be provided and adapted by the user application. */
-#endif /* HSI_VALUE */
-/**
-  * @}
-  */
-
-/** @addtogroup STM32f1xx_System_Private_Macros
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F1xx_System_Private_Variables
-  * @{
-  */
-
-uint32_t SystemCoreClock = 48000000;
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F1xx_System_Private_FunctionPrototypes
-  * @{
-  */
-
-static void SetSysClock(void);
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F1xx_System_Private_Functions
-  * @{
-  */
-
-/**
-  * @brief  Setup the microcontroller system.
-  *         Initialize the default HSI clock source, vector table location and the PLL configuration is reset.
-  * @param  None
-  * @retval None
-  */
-void SystemInit(void)
-{
-  /* Enable Prefetch Buffer, 2 wait states */
-  FLASH->ACR = FLASH_ACR_PRFTBE | FLASH_ACR_LATENCY_1;
-
-  /* Configure the System clock frequency, AHB/APBx prescalers */
-  SetSysClock();
-}
-
-
-/**
-  * @brief  Configures the System clock frequency and AHB/APBx prescalers
-  *         settings.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClock(void)
-{
-  /* Enable HSE and Clock Security System */
-  RCC->CR |= RCC_CR_CSSON | RCC_CR_HSEON;
-  /* Wait for HSE startup */
-  while((RCC->CR & RCC_CR_HSERDY) == 0)
-    ;
-  
-  /* Enable PLL with 9x multiplier and HSE clock source
-   * APB1 prescaler /2 */
-  RCC->CFGR = (RCC->CFGR & (~RCC_CFGR_PLLMULL)) | RCC_CFGR_PLLMULL9
-              | RCC_CFGR_PLLSRC;
-  RCC->CR |= RCC_CR_PLLON;
-  while((RCC->CR & RCC_CR_PLLRDY) == 0)
-    ;
-  
-  /* HCLK = SYSCLK */
-  RCC->CFGR = (RCC->CFGR & ~RCC_CFGR_HPRE) | RCC_CFGR_HPRE_DIV1;
-  /* PCLK1 = HCLK/2; PCLK2 = HCLK */
-  RCC->CFGR = (RCC->CFGR & ~(RCC_CFGR_PPRE1|RCC_CFGR_PPRE2))
-              | RCC_CFGR_PPRE1_DIV2;
-  
-  /* Switch SYSCLK to PLL */
-  RCC->CFGR |= RCC_CFGR_SW_PLL;
-  while((RCC->CFGR & RCC_CFGR_SWS) != RCC_CFGR_SWS_PLL)
-    ;
-}
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-  
-#endif
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-