Superminaren/MMDVM
1
0
Fork 0
mirror of https://github.com/g4klx/MMDVM.git synced 2026-10-13 23:34:12 +02:00
Code Issues Packages Projects Releases Wiki Activity

Add submodules for F4/F7 libs

Browse Source
This commit is contained in:
Luca Marchesano
2018-06-29 09:31:01 +02:00
committed by GitHub
parent 047229d6d3
commit 0833dba9bd
72 changed files with 116688 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files
STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/source/misc.c
+249
View File
@@ -0,0 +1,249 @@
/**
******************************************************************************
* @file misc.c
* @author MCD Application Team
* @version V1.7.1
* @date 20-May-2016
* @brief This file provides all the miscellaneous firmware functions (add-on
* to CMSIS functions).
*
* @verbatim
*
* ===================================================================
* How to configure Interrupts using driver
* ===================================================================
*
* This section provide functions allowing to configure the NVIC interrupts (IRQ).
* The Cortex-M4 exceptions are managed by CMSIS functions.
*
* 1. Configure the NVIC Priority Grouping using NVIC_PriorityGroupConfig()
* function according to the following table.
* The table below gives the allowed values of the pre-emption priority and subpriority according
* to the Priority Grouping configuration performed by NVIC_PriorityGroupConfig function
* ==========================================================================================================================
* NVIC_PriorityGroup | NVIC_IRQChannelPreemptionPriority | NVIC_IRQChannelSubPriority | Description
* ==========================================================================================================================
* NVIC_PriorityGroup_0 | 0 | 0-15 | 0 bits for pre-emption priority
* | | | 4 bits for subpriority
* --------------------------------------------------------------------------------------------------------------------------
* NVIC_PriorityGroup_1 | 0-1 | 0-7 | 1 bits for pre-emption priority
* | | | 3 bits for subpriority
* --------------------------------------------------------------------------------------------------------------------------
* NVIC_PriorityGroup_2 | 0-3 | 0-3 | 2 bits for pre-emption priority
* | | | 2 bits for subpriority
* --------------------------------------------------------------------------------------------------------------------------
* NVIC_PriorityGroup_3 | 0-7 | 0-1 | 3 bits for pre-emption priority
* | | | 1 bits for subpriority
* --------------------------------------------------------------------------------------------------------------------------
* NVIC_PriorityGroup_4 | 0-15 | 0 | 4 bits for pre-emption priority
* | | | 0 bits for subpriority
* ==========================================================================================================================
*
* 2. Enable and Configure the priority of the selected IRQ Channels using NVIC_Init()
*
* @note When the NVIC_PriorityGroup_0 is selected, IRQ pre-emption is no more possible.
* The pending IRQ priority will be managed only by the subpriority.
*
* @note IRQ priority order (sorted by highest to lowest priority):
* - Lowest pre-emption priority
* - Lowest subpriority
* - Lowest hardware priority (IRQ number)
*
* @endverbatim
*
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2016 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "misc.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @defgroup MISC
* @brief MISC driver modules
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
#define AIRCR_VECTKEY_MASK ((uint32_t)0x05FA0000)
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup MISC_Private_Functions
* @{
*/
/**
* @brief Configures the priority grouping: pre-emption priority and subpriority.
* @param NVIC_PriorityGroup: specifies the priority grouping bits length.
* This parameter can be one of the following values:
* @arg NVIC_PriorityGroup_0: 0 bits for pre-emption priority
* 4 bits for subpriority
* @arg NVIC_PriorityGroup_1: 1 bits for pre-emption priority
* 3 bits for subpriority
* @arg NVIC_PriorityGroup_2: 2 bits for pre-emption priority
* 2 bits for subpriority
* @arg NVIC_PriorityGroup_3: 3 bits for pre-emption priority
* 1 bits for subpriority
* @arg NVIC_PriorityGroup_4: 4 bits for pre-emption priority
* 0 bits for subpriority
* @note When the NVIC_PriorityGroup_0 is selected, IRQ pre-emption is no more possible.
* The pending IRQ priority will be managed only by the subpriority.
* @retval None
*/
void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup)
{
/* Check the parameters */
assert_param(IS_NVIC_PRIORITY_GROUP(NVIC_PriorityGroup));
/* Set the PRIGROUP[10:8] bits according to NVIC_PriorityGroup value */
SCB->AIRCR = AIRCR_VECTKEY_MASK | NVIC_PriorityGroup;
}
/**
* @brief Initializes the NVIC peripheral according to the specified
* parameters in the NVIC_InitStruct.
* @note To configure interrupts priority correctly, the NVIC_PriorityGroupConfig()
* function should be called before.
* @param NVIC_InitStruct: pointer to a NVIC_InitTypeDef structure that contains
* the configuration information for the specified NVIC peripheral.
* @retval None
*/
void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct)
{
uint8_t tmppriority = 0x00, tmppre = 0x00, tmpsub = 0x0F;
/* Check the parameters */
assert_param(IS_FUNCTIONAL_STATE(NVIC_InitStruct->NVIC_IRQChannelCmd));
assert_param(IS_NVIC_PREEMPTION_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority));
assert_param(IS_NVIC_SUB_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelSubPriority));
if (NVIC_InitStruct->NVIC_IRQChannelCmd != DISABLE)
{
/* Compute the Corresponding IRQ Priority --------------------------------*/
tmppriority = (0x700 - ((SCB->AIRCR) & (uint32_t)0x700))>> 0x08;
tmppre = (0x4 - tmppriority);
tmpsub = tmpsub >> tmppriority;
tmppriority = NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority << tmppre;
tmppriority |= (uint8_t)(NVIC_InitStruct->NVIC_IRQChannelSubPriority & tmpsub);
tmppriority = tmppriority << 0x04;
NVIC->IP[NVIC_InitStruct->NVIC_IRQChannel] = tmppriority;
/* Enable the Selected IRQ Channels --------------------------------------*/
NVIC->ISER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] =
(uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F);
}
else
{
/* Disable the Selected IRQ Channels -------------------------------------*/
NVIC->ICER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] =
(uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F);
}
}
/**
* @brief Sets the vector table location and Offset.
* @param NVIC_VectTab: specifies if the vector table is in RAM or FLASH memory.
* This parameter can be one of the following values:
* @arg NVIC_VectTab_RAM: Vector Table in internal SRAM.
* @arg NVIC_VectTab_FLASH: Vector Table in internal FLASH.
* @param Offset: Vector Table base offset field. This value must be a multiple of 0x200.
* @retval None
*/
void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset)
{
/* Check the parameters */
assert_param(IS_NVIC_VECTTAB(NVIC_VectTab));
assert_param(IS_NVIC_OFFSET(Offset));
SCB->VTOR = NVIC_VectTab | (Offset & (uint32_t)0x1FFFFF80);
}
/**
* @brief Selects the condition for the system to enter low power mode.
* @param LowPowerMode: Specifies the new mode for the system to enter low power mode.
* This parameter can be one of the following values:
* @arg NVIC_LP_SEVONPEND: Low Power SEV on Pend.
* @arg NVIC_LP_SLEEPDEEP: Low Power DEEPSLEEP request.
* @arg NVIC_LP_SLEEPONEXIT: Low Power Sleep on Exit.
* @param NewState: new state of LP condition. This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_NVIC_LP(LowPowerMode));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
SCB->SCR |= LowPowerMode;
}
else
{
SCB->SCR &= (uint32_t)(~(uint32_t)LowPowerMode);
}
}
/**
* @brief Configures the SysTick clock source.
* @param SysTick_CLKSource: specifies the SysTick clock source.
* This parameter can be one of the following values:
* @arg SysTick_CLKSource_HCLK_Div8: AHB clock divided by 8 selected as SysTick clock source.
* @arg SysTick_CLKSource_HCLK: AHB clock selected as SysTick clock source.
* @retval None
*/
void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource)
{
/* Check the parameters */
assert_param(IS_SYSTICK_CLK_SOURCE(SysTick_CLKSource));
if (SysTick_CLKSource == SysTick_CLKSource_HCLK)
{
SysTick->CTRL |= SysTick_CLKSource_HCLK;
}
else
{
SysTick->CTRL &= SysTick_CLKSource_HCLK_Div8;
}
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/source/stm32f4xx_adc.c
+1745
View File
File diff suppressed because it is too large Load Diff
STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/source/stm32f4xx_dac.c
+714
View File
@@ -0,0 +1,714 @@
/**
******************************************************************************
* @file stm32f4xx_dac.c
* @author MCD Application Team
* @version V1.7.1
* @date 20-May-2016
* @brief This file provides firmware functions to manage the following
* functionalities of the Digital-to-Analog Converter (DAC) peripheral:
* + DAC channels configuration: trigger, output buffer, data format
* + DMA management
* + Interrupts and flags management
*
@verbatim
===============================================================================
##### DAC Peripheral features #####
===============================================================================
[..]
*** DAC Channels ***
====================
[..]
The device integrates two 12-bit Digital Analog Converters that can
be used independently or simultaneously (dual mode):
(#) DAC channel1 with DAC_OUT1 (PA4) as output
(#) DAC channel2 with DAC_OUT2 (PA5) as output
*** DAC Triggers ***
====================
[..]
Digital to Analog conversion can be non-triggered using DAC_Trigger_None
and DAC_OUT1/DAC_OUT2 is available once writing to DHRx register
using DAC_SetChannel1Data() / DAC_SetChannel2Data() functions.
[..]
Digital to Analog conversion can be triggered by:
(#) External event: EXTI Line 9 (any GPIOx_Pin9) using DAC_Trigger_Ext_IT9.
The used pin (GPIOx_Pin9) must be configured in input mode.
(#) Timers TRGO: TIM2, TIM4, TIM5, TIM6, TIM7 and TIM8
(DAC_Trigger_T2_TRGO, DAC_Trigger_T4_TRGO...)
The timer TRGO event should be selected using TIM_SelectOutputTrigger()
(#) Software using DAC_Trigger_Software
*** DAC Buffer mode feature ***
===============================
[..]
Each DAC channel integrates an output buffer that can be used to
reduce the output impedance, and to drive external loads directly
without having to add an external operational amplifier.
To enable, the output buffer use
DAC_InitStructure.DAC_OutputBuffer = DAC_OutputBuffer_Enable;
[..]
(@) Refer to the device datasheet for more details about output
impedance value with and without output buffer.
*** DAC wave generation feature ***
===================================
[..]
Both DAC channels can be used to generate
(#) Noise wave using DAC_WaveGeneration_Noise
(#) Triangle wave using DAC_WaveGeneration_Triangle
-@- Wave generation can be disabled using DAC_WaveGeneration_None
*** DAC data format ***
=======================
[..]
The DAC data format can be:
(#) 8-bit right alignment using DAC_Align_8b_R
(#) 12-bit left alignment using DAC_Align_12b_L
(#) 12-bit right alignment using DAC_Align_12b_R
*** DAC data value to voltage correspondence ***
================================================
[..]
The analog output voltage on each DAC channel pin is determined
by the following equation:
DAC_OUTx = VREF+ * DOR / 4095
with DOR is the Data Output Register
VEF+ is the input voltage reference (refer to the device datasheet)
e.g. To set DAC_OUT1 to 0.7V, use
DAC_SetChannel1Data(DAC_Align_12b_R, 868);
Assuming that VREF+ = 3.3V, DAC_OUT1 = (3.3 * 868) / 4095 = 0.7V
*** DMA requests ***
=====================
[..]
A DMA1 request can be generated when an external trigger (but not
a software trigger) occurs if DMA1 requests are enabled using
DAC_DMACmd()
[..]
DMA1 requests are mapped as following:
(#) DAC channel1 : mapped on DMA1 Stream5 channel7 which must be
already configured
(#) DAC channel2 : mapped on DMA1 Stream6 channel7 which must be
already configured
##### How to use this driver #####
===============================================================================
[..]
(+) DAC APB clock must be enabled to get write access to DAC
registers using
RCC_APB1PeriphClockCmd(RCC_APB1Periph_DAC, ENABLE)
(+) Configure DAC_OUTx (DAC_OUT1: PA4, DAC_OUT2: PA5) in analog mode.
(+) Configure the DAC channel using DAC_Init() function
(+) Enable the DAC channel using DAC_Cmd() function
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2016 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_dac.h"
#include "stm32f4xx_rcc.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @defgroup DAC
* @brief DAC driver modules
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* CR register Mask */
#define CR_CLEAR_MASK ((uint32_t)0x00000FFE)
/* DAC Dual Channels SWTRIG masks */
#define DUAL_SWTRIG_SET ((uint32_t)0x00000003)
#define DUAL_SWTRIG_RESET ((uint32_t)0xFFFFFFFC)
/* DHR registers offsets */
#define DHR12R1_OFFSET ((uint32_t)0x00000008)
#define DHR12R2_OFFSET ((uint32_t)0x00000014)
#define DHR12RD_OFFSET ((uint32_t)0x00000020)
/* DOR register offset */
#define DOR_OFFSET ((uint32_t)0x0000002C)
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup DAC_Private_Functions
* @{
*/
/** @defgroup DAC_Group1 DAC channels configuration
* @brief DAC channels configuration: trigger, output buffer, data format
*
@verbatim
===============================================================================
##### DAC channels configuration: trigger, output buffer, data format #####
===============================================================================
@endverbatim
* @{
*/
/**
* @brief Deinitializes the DAC peripheral registers to their default reset values.
* @param None
* @retval None
*/
void DAC_DeInit(void)
{
/* Enable DAC reset state */
RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, ENABLE);
/* Release DAC from reset state */
RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, DISABLE);
}
/**
* @brief Initializes the DAC peripheral according to the specified parameters
* in the DAC_InitStruct.
* @param DAC_Channel: the selected DAC channel.
* This parameter can be one of the following values:
* @arg DAC_Channel_1: DAC Channel1 selected
* @arg DAC_Channel_2: DAC Channel2 selected
* @param DAC_InitStruct: pointer to a DAC_InitTypeDef structure that contains
* the configuration information for the specified DAC channel.
* @retval None
*/
void DAC_Init(uint32_t DAC_Channel, DAC_InitTypeDef* DAC_InitStruct)
{
uint32_t tmpreg1 = 0, tmpreg2 = 0;
/* Check the DAC parameters */
assert_param(IS_DAC_TRIGGER(DAC_InitStruct->DAC_Trigger));
assert_param(IS_DAC_GENERATE_WAVE(DAC_InitStruct->DAC_WaveGeneration));
assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude));
assert_param(IS_DAC_OUTPUT_BUFFER_STATE(DAC_InitStruct->DAC_OutputBuffer));
/*---------------------------- DAC CR Configuration --------------------------*/
/* Get the DAC CR value */
tmpreg1 = DAC->CR;
/* Clear BOFFx, TENx, TSELx, WAVEx and MAMPx bits */
tmpreg1 &= ~(CR_CLEAR_MASK << DAC_Channel);
/* Configure for the selected DAC channel: buffer output, trigger,
wave generation, mask/amplitude for wave generation */
/* Set TSELx and TENx bits according to DAC_Trigger value */
/* Set WAVEx bits according to DAC_WaveGeneration value */
/* Set MAMPx bits according to DAC_LFSRUnmask_TriangleAmplitude value */
/* Set BOFFx bit according to DAC_OutputBuffer value */
tmpreg2 = (DAC_InitStruct->DAC_Trigger | DAC_InitStruct->DAC_WaveGeneration |
DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude | \
DAC_InitStruct->DAC_OutputBuffer);
/* Calculate CR register value depending on DAC_Channel */
tmpreg1 |= tmpreg2 << DAC_Channel;
/* Write to DAC CR */
DAC->CR = tmpreg1;
}
/**
* @brief Fills each DAC_InitStruct member with its default value.
* @param DAC_InitStruct: pointer to a DAC_InitTypeDef structure which will
* be initialized.
* @retval None
*/
void DAC_StructInit(DAC_InitTypeDef* DAC_InitStruct)
{
/*--------------- Reset DAC init structure parameters values -----------------*/
/* Initialize the DAC_Trigger member */
DAC_InitStruct->DAC_Trigger = DAC_Trigger_None;
/* Initialize the DAC_WaveGeneration member */
DAC_InitStruct->DAC_WaveGeneration = DAC_WaveGeneration_None;
/* Initialize the DAC_LFSRUnmask_TriangleAmplitude member */
DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude = DAC_LFSRUnmask_Bit0;
/* Initialize the DAC_OutputBuffer member */
DAC_InitStruct->DAC_OutputBuffer = DAC_OutputBuffer_Enable;
}
/**
* @brief Enables or disables the specified DAC channel.
* @param DAC_Channel: The selected DAC channel.
* This parameter can be one of the following values:
* @arg DAC_Channel_1: DAC Channel1 selected
* @arg DAC_Channel_2: DAC Channel2 selected
* @param NewState: new state of the DAC channel.
* This parameter can be: ENABLE or DISABLE.
* @note When the DAC channel is enabled the trigger source can no more be modified.
* @retval None
*/
void DAC_Cmd(uint32_t DAC_Channel, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_DAC_CHANNEL(DAC_Channel));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
/* Enable the selected DAC channel */
DAC->CR |= (DAC_CR_EN1 << DAC_Channel);
}
else
{
/* Disable the selected DAC channel */
DAC->CR &= (~(DAC_CR_EN1 << DAC_Channel));
}
}
/**
* @brief Enables or disables the selected DAC channel software trigger.
* @param DAC_Channel: The selected DAC channel.
* This parameter can be one of the following values:
* @arg DAC_Channel_1: DAC Channel1 selected
* @arg DAC_Channel_2: DAC Channel2 selected
* @param NewState: new state of the selected DAC channel software trigger.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void DAC_SoftwareTriggerCmd(uint32_t DAC_Channel, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_DAC_CHANNEL(DAC_Channel));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
/* Enable software trigger for the selected DAC channel */
DAC->SWTRIGR |= (uint32_t)DAC_SWTRIGR_SWTRIG1 << (DAC_Channel >> 4);
}
else
{
/* Disable software trigger for the selected DAC channel */
DAC->SWTRIGR &= ~((uint32_t)DAC_SWTRIGR_SWTRIG1 << (DAC_Channel >> 4));
}
}
/**
* @brief Enables or disables simultaneously the two DAC channels software triggers.
* @param NewState: new state of the DAC channels software triggers.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void DAC_DualSoftwareTriggerCmd(FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
/* Enable software trigger for both DAC channels */
DAC->SWTRIGR |= DUAL_SWTRIG_SET;
}
else
{
/* Disable software trigger for both DAC channels */
DAC->SWTRIGR &= DUAL_SWTRIG_RESET;
}
}
/**
* @brief Enables or disables the selected DAC channel wave generation.
* @param DAC_Channel: The selected DAC channel.
* This parameter can be one of the following values:
* @arg DAC_Channel_1: DAC Channel1 selected
* @arg DAC_Channel_2: DAC Channel2 selected
* @param DAC_Wave: specifies the wave type to enable or disable.
* This parameter can be one of the following values:
* @arg DAC_Wave_Noise: noise wave generation
* @arg DAC_Wave_Triangle: triangle wave generation
* @param NewState: new state of the selected DAC channel wave generation.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void DAC_WaveGenerationCmd(uint32_t DAC_Channel, uint32_t DAC_Wave, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_DAC_CHANNEL(DAC_Channel));
assert_param(IS_DAC_WAVE(DAC_Wave));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
/* Enable the selected wave generation for the selected DAC channel */
DAC->CR |= DAC_Wave << DAC_Channel;
}
else
{
/* Disable the selected wave generation for the selected DAC channel */
DAC->CR &= ~(DAC_Wave << DAC_Channel);
}
}
/**
* @brief Set the specified data holding register value for DAC channel1.
* @param DAC_Align: Specifies the data alignment for DAC channel1.
* This parameter can be one of the following values:
* @arg DAC_Align_8b_R: 8bit right data alignment selected
* @arg DAC_Align_12b_L: 12bit left data alignment selected
* @arg DAC_Align_12b_R: 12bit right data alignment selected
* @param Data: Data to be loaded in the selected data holding register.
* @retval None
*/
void DAC_SetChannel1Data(uint32_t DAC_Align, uint16_t Data)
{
__IO uint32_t tmp = 0;
/* Check the parameters */
assert_param(IS_DAC_ALIGN(DAC_Align));
assert_param(IS_DAC_DATA(Data));
tmp = (uint32_t)DAC_BASE;
tmp += DHR12R1_OFFSET + DAC_Align;
/* Set the DAC channel1 selected data holding register */
*(__IO uint32_t *) tmp = Data;
}
/**
* @brief Set the specified data holding register value for DAC channel2.
* @param DAC_Align: Specifies the data alignment for DAC channel2.
* This parameter can be one of the following values:
* @arg DAC_Align_8b_R: 8bit right data alignment selected
* @arg DAC_Align_12b_L: 12bit left data alignment selected
* @arg DAC_Align_12b_R: 12bit right data alignment selected
* @param Data: Data to be loaded in the selected data holding register.
* @retval None
*/
void DAC_SetChannel2Data(uint32_t DAC_Align, uint16_t Data)
{
__IO uint32_t tmp = 0;
/* Check the parameters */
assert_param(IS_DAC_ALIGN(DAC_Align));
assert_param(IS_DAC_DATA(Data));
tmp = (uint32_t)DAC_BASE;
tmp += DHR12R2_OFFSET + DAC_Align;
/* Set the DAC channel2 selected data holding register */
*(__IO uint32_t *)tmp = Data;
}
/**
* @brief Set the specified data holding register value for dual channel DAC.
* @param DAC_Align: Specifies the data alignment for dual channel DAC.
* This parameter can be one of the following values:
* @arg DAC_Align_8b_R: 8bit right data alignment selected
* @arg DAC_Align_12b_L: 12bit left data alignment selected
* @arg DAC_Align_12b_R: 12bit right data alignment selected
* @param Data2: Data for DAC Channel2 to be loaded in the selected data holding register.
* @param Data1: Data for DAC Channel1 to be loaded in the selected data holding register.
* @note In dual mode, a unique register access is required to write in both
* DAC channels at the same time.
* @retval None
*/
void DAC_SetDualChannelData(uint32_t DAC_Align, uint16_t Data2, uint16_t Data1)
{
uint32_t data = 0, tmp = 0;
/* Check the parameters */
assert_param(IS_DAC_ALIGN(DAC_Align));
assert_param(IS_DAC_DATA(Data1));
assert_param(IS_DAC_DATA(Data2));
/* Calculate and set dual DAC data holding register value */
if (DAC_Align == DAC_Align_8b_R)
{
data = ((uint32_t)Data2 << 8) | Data1;
}
else
{
data = ((uint32_t)Data2 << 16) | Data1;
}
tmp = (uint32_t)DAC_BASE;
tmp += DHR12RD_OFFSET + DAC_Align;
/* Set the dual DAC selected data holding register */
*(__IO uint32_t *)tmp = data;
}
/**
* @brief Returns the last data output value of the selected DAC channel.
* @param DAC_Channel: The selected DAC channel.
* This parameter can be one of the following values:
* @arg DAC_Channel_1: DAC Channel1 selected
* @arg DAC_Channel_2: DAC Channel2 selected
* @retval The selected DAC channel data output value.
*/
uint16_t DAC_GetDataOutputValue(uint32_t DAC_Channel)
{
__IO uint32_t tmp = 0;
/* Check the parameters */
assert_param(IS_DAC_CHANNEL(DAC_Channel));
tmp = (uint32_t) DAC_BASE ;
tmp += DOR_OFFSET + ((uint32_t)DAC_Channel >> 2);
/* Returns the DAC channel data output register value */
return (uint16_t) (*(__IO uint32_t*) tmp);
}
/**
* @}
*/
/** @defgroup DAC_Group2 DMA management functions
* @brief DMA management functions
*
@verbatim
===============================================================================
##### DMA management functions #####
===============================================================================
@endverbatim
* @{
*/
/**
* @brief Enables or disables the specified DAC channel DMA request.
* @note When enabled DMA1 is generated when an external trigger (EXTI Line9,
* TIM2, TIM4, TIM5, TIM6, TIM7 or TIM8 but not a software trigger) occurs.
* @param DAC_Channel: The selected DAC channel.
* This parameter can be one of the following values:
* @arg DAC_Channel_1: DAC Channel1 selected
* @arg DAC_Channel_2: DAC Channel2 selected
* @param NewState: new state of the selected DAC channel DMA request.
* This parameter can be: ENABLE or DISABLE.
* @note The DAC channel1 is mapped on DMA1 Stream 5 channel7 which must be
* already configured.
* @note The DAC channel2 is mapped on DMA1 Stream 6 channel7 which must be
* already configured.
* @retval None
*/
void DAC_DMACmd(uint32_t DAC_Channel, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_DAC_CHANNEL(DAC_Channel));
assert_param(IS_FUNCTIONAL_STATE(NewState));
if (NewState != DISABLE)
{
/* Enable the selected DAC channel DMA request */
DAC->CR |= (DAC_CR_DMAEN1 << DAC_Channel);
}
else
{
/* Disable the selected DAC channel DMA request */
DAC->CR &= (~(DAC_CR_DMAEN1 << DAC_Channel));
}
}
/**
* @}
*/
/** @defgroup DAC_Group3 Interrupts and flags management functions
* @brief Interrupts and flags management functions
*
@verbatim
===============================================================================
##### Interrupts and flags management functions #####
===============================================================================
@endverbatim
* @{
*/
/**
* @brief Enables or disables the specified DAC interrupts.
* @param DAC_Channel: The selected DAC channel.
* This parameter can be one of the following values:
* @arg DAC_Channel_1: DAC Channel1 selected
* @arg DAC_Channel_2: DAC Channel2 selected
* @param DAC_IT: specifies the DAC interrupt sources to be enabled or disabled.
* This parameter can be the following values:
* @arg DAC_IT_DMAUDR: DMA underrun interrupt mask
* @note The DMA underrun occurs when a second external trigger arrives before the
* acknowledgement for the first external trigger is received (first request).
* @param NewState: new state of the specified DAC interrupts.
* This parameter can be: ENABLE or DISABLE.
* @retval None
*/
void DAC_ITConfig(uint32_t DAC_Channel, uint32_t DAC_IT, FunctionalState NewState)
{
/* Check the parameters */
assert_param(IS_DAC_CHANNEL(DAC_Channel));
assert_param(IS_FUNCTIONAL_STATE(NewState));
assert_param(IS_DAC_IT(DAC_IT));
if (NewState != DISABLE)
{
/* Enable the selected DAC interrupts */
DAC->CR |= (DAC_IT << DAC_Channel);
}
else
{
/* Disable the selected DAC interrupts */
DAC->CR &= (~(uint32_t)(DAC_IT << DAC_Channel));
}
}
/**
* @brief Checks whether the specified DAC flag is set or not.
* @param DAC_Channel: The selected DAC channel.
* This parameter can be one of the following values:
* @arg DAC_Channel_1: DAC Channel1 selected
* @arg DAC_Channel_2: DAC Channel2 selected
* @param DAC_FLAG: specifies the flag to check.
* This parameter can be only of the following value:
* @arg DAC_FLAG_DMAUDR: DMA underrun flag
* @note The DMA underrun occurs when a second external trigger arrives before the
* acknowledgement for the first external trigger is received (first request).
* @retval The new state of DAC_FLAG (SET or RESET).
*/
FlagStatus DAC_GetFlagStatus(uint32_t DAC_Channel, uint32_t DAC_FLAG)
{
FlagStatus bitstatus = RESET;
/* Check the parameters */
assert_param(IS_DAC_CHANNEL(DAC_Channel));
assert_param(IS_DAC_FLAG(DAC_FLAG));
/* Check the status of the specified DAC flag */
if ((DAC->SR & (DAC_FLAG << DAC_Channel)) != (uint8_t)RESET)
{
/* DAC_FLAG is set */
bitstatus = SET;
}
else
{
/* DAC_FLAG is reset */
bitstatus = RESET;
}
/* Return the DAC_FLAG status */
return bitstatus;
}
/**
* @brief Clears the DAC channel's pending flags.
* @param DAC_Channel: The selected DAC channel.
* This parameter can be one of the following values:
* @arg DAC_Channel_1: DAC Channel1 selected
* @arg DAC_Channel_2: DAC Channel2 selected
* @param DAC_FLAG: specifies the flag to clear.
* This parameter can be of the following value:
* @arg DAC_FLAG_DMAUDR: DMA underrun flag
* @note The DMA underrun occurs when a second external trigger arrives before the
* acknowledgement for the first external trigger is received (first request).
* @retval None
*/
void DAC_ClearFlag(uint32_t DAC_Channel, uint32_t DAC_FLAG)
{
/* Check the parameters */
assert_param(IS_DAC_CHANNEL(DAC_Channel));
assert_param(IS_DAC_FLAG(DAC_FLAG));
/* Clear the selected DAC flags */
DAC->SR = (DAC_FLAG << DAC_Channel);
}
/**
* @brief Checks whether the specified DAC interrupt has occurred or not.
* @param DAC_Channel: The selected DAC channel.
* This parameter can be one of the following values:
* @arg DAC_Channel_1: DAC Channel1 selected
* @arg DAC_Channel_2: DAC Channel2 selected
* @param DAC_IT: specifies the DAC interrupt source to check.
* This parameter can be the following values:
* @arg DAC_IT_DMAUDR: DMA underrun interrupt mask
* @note The DMA underrun occurs when a second external trigger arrives before the
* acknowledgement for the first external trigger is received (first request).
* @retval The new state of DAC_IT (SET or RESET).
*/
ITStatus DAC_GetITStatus(uint32_t DAC_Channel, uint32_t DAC_IT)
{
ITStatus bitstatus = RESET;
uint32_t enablestatus = 0;
/* Check the parameters */
assert_param(IS_DAC_CHANNEL(DAC_Channel));
assert_param(IS_DAC_IT(DAC_IT));
/* Get the DAC_IT enable bit status */
enablestatus = (DAC->CR & (DAC_IT << DAC_Channel)) ;
/* Check the status of the specified DAC interrupt */
if (((DAC->SR & (DAC_IT << DAC_Channel)) != (uint32_t)RESET) && enablestatus)
{
/* DAC_IT is set */
bitstatus = SET;
}
else
{
/* DAC_IT is reset */
bitstatus = RESET;
}
/* Return the DAC_IT status */
return bitstatus;
}
/**
* @brief Clears the DAC channel's interrupt pending bits.
* @param DAC_Channel: The selected DAC channel.
* This parameter can be one of the following values:
* @arg DAC_Channel_1: DAC Channel1 selected
* @arg DAC_Channel_2: DAC Channel2 selected
* @param DAC_IT: specifies the DAC interrupt pending bit to clear.
* This parameter can be the following values:
* @arg DAC_IT_DMAUDR: DMA underrun interrupt mask
* @note The DMA underrun occurs when a second external trigger arrives before the
* acknowledgement for the first external trigger is received (first request).
* @retval None
*/
void DAC_ClearITPendingBit(uint32_t DAC_Channel, uint32_t DAC_IT)
{
/* Check the parameters */
assert_param(IS_DAC_CHANNEL(DAC_Channel));
assert_param(IS_DAC_IT(DAC_IT));
/* Clear the selected DAC interrupt pending bits */
DAC->SR = (DAC_IT << DAC_Channel);
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/source/stm32f4xx_gpio.c
+611
View File
@@ -0,0 +1,611 @@
/**
******************************************************************************
* @file stm32f4xx_gpio.c
* @author MCD Application Team
* @version V1.7.1
* @date 20-May-2016
* @brief This file provides firmware functions to manage the following
* functionalities of the GPIO peripheral:
* + Initialization and Configuration
* + GPIO Read and Write
* + GPIO Alternate functions configuration
*
@verbatim
===============================================================================
##### How to use this driver #####
===============================================================================
[..]
(#) Enable the GPIO AHB clock using the following function
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOx, ENABLE);
(#) Configure the GPIO pin(s) using GPIO_Init()
Four possible configuration are available for each pin:
(++) Input: Floating, Pull-up, Pull-down.
(++) Output: Push-Pull (Pull-up, Pull-down or no Pull)
Open Drain (Pull-up, Pull-down or no Pull). In output mode, the speed
is configurable: 2 MHz, 25 MHz, 50 MHz or 100 MHz.
(++) Alternate Function: Push-Pull (Pull-up, Pull-down or no Pull) Open
Drain (Pull-up, Pull-down or no Pull).
(++) Analog: required mode when a pin is to be used as ADC channel or DAC
output.
(#) Peripherals alternate function:
(++) For ADC and DAC, configure the desired pin in analog mode using
GPIO_InitStruct->GPIO_Mode = GPIO_Mode_AN;
(+++) For other peripherals (TIM, USART...):
(+++) Connect the pin to the desired peripherals' Alternate
Function (AF) using GPIO_PinAFConfig() function
(+++) Configure the desired pin in alternate function mode using
GPIO_InitStruct->GPIO_Mode = GPIO_Mode_AF
(+++) Select the type, pull-up/pull-down and output speed via
GPIO_PuPd, GPIO_OType and GPIO_Speed members
(+++) Call GPIO_Init() function
(#) To get the level of a pin configured in input mode use GPIO_ReadInputDataBit()
(#) To set/reset the level of a pin configured in output mode use
GPIO_SetBits()/GPIO_ResetBits()
(#) During and just after reset, the alternate functions are not
active and the GPIO pins are configured in input floating mode (except JTAG
pins).
(#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose
(PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has
priority over the GPIO function.
(#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as
general purpose PH0 and PH1, respectively, when the HSE oscillator is off.
The HSE has priority over the GPIO function.
@endverbatim
*
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2016 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_gpio.h"
#include "stm32f4xx_rcc.h"
/** @addtogroup STM32F4xx_StdPeriph_Driver
* @{
*/
/** @defgroup GPIO
* @brief GPIO driver modules
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup GPIO_Private_Functions
* @{
*/
/** @defgroup GPIO_Group1 Initialization and Configuration
* @brief Initialization and Configuration
*
@verbatim
===============================================================================
##### Initialization and Configuration #####
===============================================================================
@endverbatim
* @{
*/
/**
* @brief De-initializes the GPIOx peripheral registers to their default reset values.
* @note By default, The GPIO pins are configured in input floating mode (except JTAG pins).
* @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F405xx/407xx and STM32F415xx/417xx devices
* x can be (A..I) to select the GPIO peripheral for STM32F42xxx/43xxx devices.
* x can be (A, B, C, D and H) to select the GPIO peripheral for STM32F401xx devices.
* @retval None
*/
void GPIO_DeInit(GPIO_TypeDef* GPIOx)
{
/* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
if (GPIOx == GPIOA)
{
RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOA, ENABLE);
RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOA, DISABLE);
}
else if (GPIOx == GPIOB)
{
RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOB, ENABLE);
RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOB, DISABLE);
}
else if (GPIOx == GPIOC)
{
RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOC, ENABLE);
RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOC, DISABLE);
}
else if (GPIOx == GPIOD)
{
RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOD, ENABLE);
RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOD, DISABLE);
}
else if (GPIOx == GPIOE)
{
RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOE, ENABLE);
RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOE, DISABLE);
}
else if (GPIOx == GPIOF)
{
RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOF, ENABLE);
RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOF, DISABLE);
}
else if (GPIOx == GPIOG)
{
RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOG, ENABLE);
RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOG, DISABLE);
}
else if (GPIOx == GPIOH)
{
RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOH, ENABLE);
RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOH, DISABLE);
}
else if (GPIOx == GPIOI)
{
RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOI, ENABLE);
RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOI, DISABLE);
}
else if (GPIOx == GPIOJ)
{
RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOJ, ENABLE);
RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOJ, DISABLE);
}
else
{
if (GPIOx == GPIOK)
{
RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOK, ENABLE);
RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOK, DISABLE);
}
}
}
/**
* @brief Initializes the GPIOx peripheral according to the specified parameters in the GPIO_InitStruct.
* @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F405xx/407xx and STM32F415xx/417xx devices
* x can be (A..I) to select the GPIO peripheral for STM32F42xxx/43xxx devices.
* x can be (A, B, C, D and H) to select the GPIO peripheral for STM32F401xx devices.
* @param GPIO_InitStruct: pointer to a GPIO_InitTypeDef structure that contains
* the configuration information for the specified GPIO peripheral.
* @retval None
*/
void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct)
{
uint32_t pinpos = 0x00, pos = 0x00 , currentpin = 0x00;
/* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
assert_param(IS_GPIO_PIN(GPIO_InitStruct->GPIO_Pin));
assert_param(IS_GPIO_MODE(GPIO_InitStruct->GPIO_Mode));
assert_param(IS_GPIO_PUPD(GPIO_InitStruct->GPIO_PuPd));
/* ------------------------- Configure the port pins ---------------- */
/*-- GPIO Mode Configuration --*/
for (pinpos = 0x00; pinpos < 0x10; pinpos++)
{
pos = ((uint32_t)0x01) << pinpos;
/* Get the port pins position */
currentpin = (GPIO_InitStruct->GPIO_Pin) & pos;
if (currentpin == pos)
{
GPIOx->MODER &= ~(GPIO_MODER_MODER0 << (pinpos * 2));
GPIOx->MODER |= (((uint32_t)GPIO_InitStruct->GPIO_Mode) << (pinpos * 2));
if ((GPIO_InitStruct->GPIO_Mode == GPIO_Mode_OUT) || (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_AF))
{
/* Check Speed mode parameters */
assert_param(IS_GPIO_SPEED(GPIO_InitStruct->GPIO_Speed));
/* Speed mode configuration */
GPIOx->OSPEEDR &= ~(GPIO_OSPEEDER_OSPEEDR0 << (pinpos * 2));
GPIOx->OSPEEDR |= ((uint32_t)(GPIO_InitStruct->GPIO_Speed) << (pinpos * 2));
/* Check Output mode parameters */
assert_param(IS_GPIO_OTYPE(GPIO_InitStruct->GPIO_OType));
/* Output mode configuration*/
GPIOx->OTYPER &= ~((GPIO_OTYPER_OT_0) << ((uint16_t)pinpos)) ;
GPIOx->OTYPER |= (uint16_t)(((uint16_t)GPIO_InitStruct->GPIO_OType) << ((uint16_t)pinpos));
}
/* Pull-up Pull down resistor configuration*/
GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPDR0 << ((uint16_t)pinpos * 2));
GPIOx->PUPDR |= (((uint32_t)GPIO_InitStruct->GPIO_PuPd) << (pinpos * 2));
}
}
}
/**
* @brief Fills each GPIO_InitStruct member with its default value.
* @param GPIO_InitStruct : pointer to a GPIO_InitTypeDef structure which will be initialized.
* @retval None
*/
void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct)
{
/* Reset GPIO init structure parameters values */
GPIO_InitStruct->GPIO_Pin = GPIO_Pin_All;
GPIO_InitStruct->GPIO_Mode = GPIO_Mode_IN;
GPIO_InitStruct->GPIO_Speed = GPIO_Speed_2MHz;
GPIO_InitStruct->GPIO_OType = GPIO_OType_PP;
GPIO_InitStruct->GPIO_PuPd = GPIO_PuPd_NOPULL;
}
/**
* @brief Locks GPIO Pins configuration registers.
* @note The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR,
* GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH.
* @note The configuration of the locked GPIO pins can no longer be modified
* until the next reset.
* @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F405xx/407xx and STM32F415xx/417xx devices
* x can be (A..I) to select the GPIO peripheral for STM32F42xxx/43xxx devices.
* x can be (A, B, C, D and H) to select the GPIO peripheral for STM32F401xx devices.
* @param GPIO_Pin: specifies the port bit to be locked.
* This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
* @retval None
*/
void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
{
__IO uint32_t tmp = 0x00010000;
/* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
assert_param(IS_GPIO_PIN(GPIO_Pin));
tmp |= GPIO_Pin;
/* Set LCKK bit */
GPIOx->LCKR = tmp;
/* Reset LCKK bit */
GPIOx->LCKR = GPIO_Pin;
/* Set LCKK bit */
GPIOx->LCKR = tmp;
/* Read LCKK bit*/
tmp = GPIOx->LCKR;
/* Read LCKK bit*/
tmp = GPIOx->LCKR;
}
/**
* @}
*/
/** @defgroup GPIO_Group2 GPIO Read and Write
* @brief GPIO Read and Write
*
@verbatim
===============================================================================
##### GPIO Read and Write #####
===============================================================================
@endverbatim
* @{
*/
/**
* @brief Reads the specified input port pin.
* @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F405xx/407xx and STM32F415xx/417xx devices
* x can be (A..I) to select the GPIO peripheral for STM32F42xxx/43xxx devices.
* x can be (A, B, C, D and H) to select the GPIO peripheral for STM32F401xx devices.
* @param GPIO_Pin: specifies the port bit to read.
* This parameter can be GPIO_Pin_x where x can be (0..15).
* @retval The input port pin value.
*/
uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
{
uint8_t bitstatus = 0x00;
/* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
assert_param(IS_GET_GPIO_PIN(GPIO_Pin));
if ((GPIOx->IDR & GPIO_Pin) != (uint32_t)Bit_RESET)
{
bitstatus = (uint8_t)Bit_SET;
}
else
{
bitstatus = (uint8_t)Bit_RESET;
}
return bitstatus;
}
/**
* @brief Reads the specified GPIO input data port.
* @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F405xx/407xx and STM32F415xx/417xx devices
* x can be (A..I) to select the GPIO peripheral for STM32F42xxx/43xxx devices.
* x can be (A, B, C, D and H) to select the GPIO peripheral for STM32F401xx devices.
* @retval GPIO input data port value.
*/
uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx)
{
/* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
return ((uint16_t)GPIOx->IDR);
}
/**
* @brief Reads the specified output data port bit.
* @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F405xx/407xx and STM32F415xx/417xx devices
* x can be (A..I) to select the GPIO peripheral for STM32F42xxx/43xxx devices.
* x can be (A, B, C, D and H) to select the GPIO peripheral for STM32F401xx devices.
* @param GPIO_Pin: specifies the port bit to read.
* This parameter can be GPIO_Pin_x where x can be (0..15).
* @retval The output port pin value.
*/
uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
{
uint8_t bitstatus = 0x00;
/* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
assert_param(IS_GET_GPIO_PIN(GPIO_Pin));
if (((GPIOx->ODR) & GPIO_Pin) != (uint32_t)Bit_RESET)
{
bitstatus = (uint8_t)Bit_SET;
}
else
{
bitstatus = (uint8_t)Bit_RESET;
}
return bitstatus;
}
/**
* @brief Reads the specified GPIO output data port.
* @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F405xx/407xx and STM32F415xx/417xx devices
* x can be (A..I) to select the GPIO peripheral for STM32F42xxx/43xxx devices.
* x can be (A, B, C, D and H) to select the GPIO peripheral for STM32F401xx devices.
* @retval GPIO output data port value.
*/
uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx)
{
/* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
return ((uint16_t)GPIOx->ODR);
}
/**
* @brief Sets the selected data port bits.
* @note This functions uses GPIOx_BSRR register to allow atomic read/modify
* accesses. In this way, there is no risk of an IRQ occurring between
* the read and the modify access.
* @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F405xx/407xx and STM32F415xx/417xx devices
* x can be (A..I) to select the GPIO peripheral for STM32F42xxx/43xxx devices.
* x can be (A, B, C, D and H) to select the GPIO peripheral for STM32F401xx devices.
* @param GPIO_Pin: specifies the port bits to be written.
* This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
* @retval None
*/
void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
{
/* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
assert_param(IS_GPIO_PIN(GPIO_Pin));
GPIOx->BSRRL = GPIO_Pin;
}
/**
* @brief Clears the selected data port bits.
* @note This functions uses GPIOx_BSRR register to allow atomic read/modify
* accesses. In this way, there is no risk of an IRQ occurring between
* the read and the modify access.
* @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F405xx/407xx and STM32F415xx/417xx devices
* x can be (A..I) to select the GPIO peripheral for STM32F42xxx/43xxx devices.
* x can be (A, B, C, D and H) to select the GPIO peripheral for STM32F401xx devices.
* @param GPIO_Pin: specifies the port bits to be written.
* This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
* @retval None
*/
void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
{
/* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
assert_param(IS_GPIO_PIN(GPIO_Pin));
GPIOx->BSRRH = GPIO_Pin;
}
/**
* @brief Sets or clears the selected data port bit.
* @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F405xx/407xx and STM32F415xx/417xx devices
* x can be (A..I) to select the GPIO peripheral for STM32F42xxx/43xxx devices.
* x can be (A, B, C, D and H) to select the GPIO peripheral for STM32F401xx devices.
* @param GPIO_Pin: specifies the port bit to be written.
* This parameter can be one of GPIO_Pin_x where x can be (0..15).
* @param BitVal: specifies the value to be written to the selected bit.
* This parameter can be one of the BitAction enum values:
* @arg Bit_RESET: to clear the port pin
* @arg Bit_SET: to set the port pin
* @retval None
*/
void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal)
{
/* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
assert_param(IS_GET_GPIO_PIN(GPIO_Pin));
assert_param(IS_GPIO_BIT_ACTION(BitVal));
if (BitVal != Bit_RESET)
{
GPIOx->BSRRL = GPIO_Pin;
}
else
{
GPIOx->BSRRH = GPIO_Pin ;
}
}
/**
* @brief Writes data to the specified GPIO data port.
* @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F405xx/407xx and STM32F415xx/417xx devices
* x can be (A..I) to select the GPIO peripheral for STM32F42xxx/43xxx devices.
* x can be (A, B, C, D and H) to select the GPIO peripheral for STM32F401xx devices.
* @param PortVal: specifies the value to be written to the port output data register.
* @retval None
*/
void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal)
{
/* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
GPIOx->ODR = PortVal;
}
/**
* @brief Toggles the specified GPIO pins..
* @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F405xx/407xx and STM32F415xx/417xx devices
* x can be (A..I) to select the GPIO peripheral for STM32F42xxx/43xxx devices.
* x can be (A, B, C, D and H) to select the GPIO peripheral for STM32F401xx devices.
* @param GPIO_Pin: Specifies the pins to be toggled.
* @retval None
*/
void GPIO_ToggleBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
{
/* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
GPIOx->ODR ^= GPIO_Pin;
}
/**
* @}
*/
/** @defgroup GPIO_Group3 GPIO Alternate functions configuration function
* @brief GPIO Alternate functions configuration function
*
@verbatim
===============================================================================
##### GPIO Alternate functions configuration function #####
===============================================================================
@endverbatim
* @{
*/
/**
* @brief Changes the mapping of the specified pin.
* @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F405xx/407xx and STM32F415xx/417xx devices
* x can be (A..I) to select the GPIO peripheral for STM32F42xxx/43xxx devices.
* x can be (A, B, C, D and H) to select the GPIO peripheral for STM32F401xx devices.
* @param GPIO_PinSource: specifies the pin for the Alternate function.
* This parameter can be GPIO_PinSourcex where x can be (0..15).
* @param GPIO_AFSelection: selects the pin to used as Alternate function.
* This parameter can be one of the following values:
* @arg GPIO_AF_RTC_50Hz: Connect RTC_50Hz pin to AF0 (default after reset)
* @arg GPIO_AF_MCO: Connect MCO pin (MCO1 and MCO2) to AF0 (default after reset)
* @arg GPIO_AF_TAMPER: Connect TAMPER pins (TAMPER_1 and TAMPER_2) to AF0 (default after reset)
* @arg GPIO_AF_SWJ: Connect SWJ pins (SWD and JTAG)to AF0 (default after reset)
* @arg GPIO_AF_TRACE: Connect TRACE pins to AF0 (default after reset)
* @arg GPIO_AF_TIM1: Connect TIM1 pins to AF1
* @arg GPIO_AF_TIM2: Connect TIM2 pins to AF1
* @arg GPIO_AF_TIM3: Connect TIM3 pins to AF2
* @arg GPIO_AF_TIM4: Connect TIM4 pins to AF2
* @arg GPIO_AF_TIM5: Connect TIM5 pins to AF2
* @arg GPIO_AF_TIM8: Connect TIM8 pins to AF3
* @arg GPIO_AF_TIM9: Connect TIM9 pins to AF3
* @arg GPIO_AF_TIM10: Connect TIM10 pins to AF3
* @arg GPIO_AF_TIM11: Connect TIM11 pins to AF3
* @arg GPIO_AF_I2C1: Connect I2C1 pins to AF4
* @arg GPIO_AF_I2C2: Connect I2C2 pins to AF4
* @arg GPIO_AF_I2C3: Connect I2C3 pins to AF4
* @arg GPIO_AF_SPI1: Connect SPI1 pins to AF5
* @arg GPIO_AF_SPI2: Connect SPI2/I2S2 pins to AF5
* @arg GPIO_AF_SPI4: Connect SPI4 pins to AF5
* @arg GPIO_AF_SPI5: Connect SPI5 pins to AF5
* @arg GPIO_AF_SPI6: Connect SPI6 pins to AF5
* @arg GPIO_AF_SAI1: Connect SAI1 pins to AF6 for STM32F42xxx/43xxx devices.
* @arg GPIO_AF_SPI3: Connect SPI3/I2S3 pins to AF6
* @arg GPIO_AF_I2S3ext: Connect I2S3ext pins to AF7
* @arg GPIO_AF_USART1: Connect USART1 pins to AF7
* @arg GPIO_AF_USART2: Connect USART2 pins to AF7
* @arg GPIO_AF_USART3: Connect USART3 pins to AF7
* @arg GPIO_AF_UART4: Connect UART4 pins to AF8
* @arg GPIO_AF_UART5: Connect UART5 pins to AF8
* @arg GPIO_AF_USART6: Connect USART6 pins to AF8
* @arg GPIO_AF_UART7: Connect UART7 pins to AF8
* @arg GPIO_AF_UART8: Connect UART8 pins to AF8
* @arg GPIO_AF_CAN1: Connect CAN1 pins to AF9
* @arg GPIO_AF_CAN2: Connect CAN2 pins to AF9
* @arg GPIO_AF_TIM12: Connect TIM12 pins to AF9
* @arg GPIO_AF_TIM13: Connect TIM13 pins to AF9
* @arg GPIO_AF_TIM14: Connect TIM14 pins to AF9
* @arg GPIO_AF_OTG_FS: Connect OTG_FS pins to AF10
* @arg GPIO_AF_OTG_HS: Connect OTG_HS pins to AF10
* @arg GPIO_AF_ETH: Connect ETHERNET pins to AF11
* @arg GPIO_AF_FSMC: Connect FSMC pins to AF12
* @arg GPIO_AF_FMC: Connect FMC pins to AF12 for STM32F42xxx/43xxx devices.
* @arg GPIO_AF_OTG_HS_FS: Connect OTG HS (configured in FS) pins to AF12
* @arg GPIO_AF_SDIO: Connect SDIO pins to AF12
* @arg GPIO_AF_DCMI: Connect DCMI pins to AF13
* @arg GPIO_AF_LTDC: Connect LTDC pins to AF14 for STM32F429xx/439xx devices.
* @arg GPIO_AF_EVENTOUT: Connect EVENTOUT pins to AF15
* @retval None
*/
void GPIO_PinAFConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_PinSource, uint8_t GPIO_AF)
{
uint32_t temp = 0x00;
uint32_t temp_2 = 0x00;
/* Check the parameters */
assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
assert_param(IS_GPIO_PIN_SOURCE(GPIO_PinSource));
assert_param(IS_GPIO_AF(GPIO_AF));
temp = ((uint32_t)(GPIO_AF) << ((uint32_t)((uint32_t)GPIO_PinSource & (uint32_t)0x07) * 4)) ;
GPIOx->AFR[GPIO_PinSource >> 0x03] &= ~((uint32_t)0xF << ((uint32_t)((uint32_t)GPIO_PinSource & (uint32_t)0x07) * 4)) ;
temp_2 = GPIOx->AFR[GPIO_PinSource >> 0x03] | temp;
GPIOx->AFR[GPIO_PinSource >> 0x03] = temp_2;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/source/stm32f4xx_rcc.c
+3022
View File
File diff suppressed because it is too large Load Diff
STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/source/stm32f4xx_tim.c
+3365
View File
File diff suppressed because it is too large Load Diff
STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/source/stm32f4xx_usart.c
+1486
View File
File diff suppressed because it is too large Load Diff