Swedish adaptation: Instegscertifikat and HAREC content

- Sections and slides rewritten in Swedish; German law and institutions replaced by
  Swedish/CEPT/ITU equivalents (PTS, SSA, PTSFS 2025:1, SSMFS 2008:18), unverified
  statements marked "% TODO VERIFY"
- New toc: INSTEG, HAREC, UPPGRADERING; section idents are Swedish (see ident-map.tsv)
- Exam-question tags, BNetzA question pool, solutions and the German SWL course removed
- Static pages, snippets, applets, READMEs and image alt-texts translated
- TikZ labels translated; SVG drawings regenerated (drawing 689 still fails to build
  upstream: it references a missing photo)
- Changed from the original: not endorsed by DARC e.V., SSA or PTS

Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
This commit is contained in:
2026-10-10 15:03:03 +02:00
co-authored by Claude Sonnet 5.5
parent 0d034a0902
commit f7fa8cfbc1
3234 changed files with 84960 additions and 137393 deletions
+5 -5
View File
@@ -3,7 +3,7 @@
\begin{tikzpicture}
%\useasboundingbox (-3.75,-1.0) rectangle (10.5,3);
\node[draw, powershape] at (0,0) (netzteil) {};
\draw(netzteil.north) ++(0,0.6) node[anchor=south]{Netzgerät};
\draw(netzteil.north) ++(0,0.6) node[anchor=south]{Nätaggregat};
\draw(netzteil.south) node[anchor=north]{\textdirectcurrent\qty{13,8}{V}};
\node[draw, trxshape] at (8,0) (trx) {};
\draw(trx.east) -- ++(1,0) node[antenna]{};
@@ -11,11 +11,11 @@
\draw(trx.south) node[ground]{};
%
\draw[red](netzteil.plus)
to [fuse, l={Sicherung}, color=red] ++(2.5,0)
to [short, i={Gleichstrom (I)}, color=red] (trx.plus);
\draw(trx.minus) to [short, i={}, l={\textcolor{gray}{\small{\textit{Kurzschluss- und Verpolungsgefahr}}}}] (netzteil.minus);
to [fuse, l={Säkring}, color=red] ++(2.5,0)
to [short, i={Likström (I)}, color=red] (trx.plus);
\draw(trx.minus) to [short, i={}, l={\textcolor{gray}{\small{\textit{Risk för kortslutning och felpolning}}}}] (netzteil.minus);
\draw(netzteil.u1) to [short, -o] ++(-1,0) coordinate(c1);
\draw(netzteil.u2) to [short, -o] ++(-1,0) coordinate(c2);
\draw(c1) to [open, l_={$\sim\qty{230}{\volt}$}] (c2);
\draw[gray](c1) to [open] ++(-0.5,0.4) node[](c3){\itshape\small Hohe Spannung};
\draw[gray](c1) to [open] ++(-0.5,0.4) node[](c3){\itshape\small Hög spänning};
\end{tikzpicture}