mirror of
https://github.com/google/pebble
synced 2026-10-17 08:44:11 +02:00
242 lines
6.8 KiB
C
242 lines
6.8 KiB
C
/*
|
|
* Copyright 2024 Google LLC
|
|
*
|
|
* Licensed under the Apache License, Version 2.0 (the "License");
|
|
* you may not use this file except in compliance with the License.
|
|
* You may obtain a copy of the License at
|
|
*
|
|
* http://www.apache.org/licenses/LICENSE-2.0
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an "AS IS" BASIS,
|
|
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
* See the License for the specific language governing permissions and
|
|
* limitations under the License.
|
|
*/
|
|
|
|
#pragma once
|
|
|
|
#include "services/imu/units.h"
|
|
#include "util/size.h"
|
|
|
|
#define BOARD_LSE_MODE RCC_LSE_Bypass
|
|
|
|
static const BoardConfig BOARD_CONFIG = {
|
|
.ambient_light_dark_threshold = 150,
|
|
.ambient_k_delta_threshold = 50,
|
|
.photo_en = { GPIOC, GPIO_Pin_0, true },
|
|
.als_always_on = true,
|
|
|
|
.dbgserial_int = { EXTI_PortSourceGPIOB, 5 },
|
|
|
|
// new sharp display requires 30/60Hz so we feed it directly from PMIC
|
|
.lcd_com = { 0 },
|
|
|
|
.backlight_on_percent = 25,
|
|
.backlight_max_duty_cycle_percent = 67,
|
|
|
|
.power_5v0_options = OptionNotPresent,
|
|
.power_ctl_5v0 = { 0 },
|
|
|
|
.has_mic = true,
|
|
};
|
|
|
|
static const BoardConfigButton BOARD_CONFIG_BUTTON = {
|
|
.buttons = {
|
|
[BUTTON_ID_BACK] =
|
|
{ "Back", GPIOC, GPIO_Pin_13, { EXTI_PortSourceGPIOC, 13 }, GPIO_PuPd_NOPULL },
|
|
[BUTTON_ID_UP] =
|
|
{ "Up", GPIOD, GPIO_Pin_2, { EXTI_PortSourceGPIOD, 2 }, GPIO_PuPd_DOWN },
|
|
[BUTTON_ID_SELECT] =
|
|
{ "Select", GPIOH, GPIO_Pin_0, { EXTI_PortSourceGPIOH, 0 }, GPIO_PuPd_DOWN },
|
|
[BUTTON_ID_DOWN] =
|
|
{ "Down", GPIOH, GPIO_Pin_1, { EXTI_PortSourceGPIOH, 1 }, GPIO_PuPd_DOWN },
|
|
},
|
|
.button_com = { 0 },
|
|
.active_high = true,
|
|
};
|
|
|
|
static const BoardConfigPower BOARD_CONFIG_POWER = {
|
|
.pmic_int = { EXTI_PortSourceGPIOC, 7 },
|
|
.pmic_int_gpio = {
|
|
.gpio = GPIOC,
|
|
.gpio_pin = GPIO_Pin_7,
|
|
},
|
|
|
|
.battery_vmon_scale = {
|
|
// Battery voltage is scaled down by a pair of resistors:
|
|
// - R13 on the top @ 47k
|
|
// - R15 on the bottom @ 30.1k
|
|
// (R13 + R15) / R15 = 77.1 / 30.1
|
|
.numerator = 771,
|
|
.denominator = 301,
|
|
},
|
|
|
|
.vusb_stat = { .gpio = GPIO_Port_NULL, },
|
|
.chg_stat = { GPIO_Port_NULL },
|
|
.chg_fast = { GPIO_Port_NULL },
|
|
.chg_en = { GPIO_Port_NULL },
|
|
.has_vusb_interrupt = false,
|
|
|
|
.wake_on_usb_power = false,
|
|
|
|
.charging_status_led_voltage_compensation = 0,
|
|
|
|
#if defined(IS_BIGBOARD) && !defined(BATTERY_DEBUG)
|
|
// We don't use the same batteries on all bigboards, so set a safe cutoff voltage of 4.2V.
|
|
// Please do not change this!
|
|
.charging_cutoff_voltage = 4200,
|
|
#else
|
|
.charging_cutoff_voltage = 4300,
|
|
#endif
|
|
|
|
.low_power_threshold = 5,
|
|
|
|
// Based on measurements from v4.0-beta16.
|
|
// Typical Connected Current at VBAT without HRM ~520uA
|
|
// Added draw with HRM on : ~1.5mA ==> Average impact (5% per hour + 1 hour continuous / day)
|
|
// (.05 * 23/24 + 1.0 * 1/24) * 1.5mA = ~134uA
|
|
// Assume ~150uA or so for notifications & user interaction
|
|
// Total Hours = 125 mA * hr / (.520 + .134 + 150)mA = 155 hours
|
|
.battery_capacity_hours = 155,
|
|
};
|
|
|
|
static const BoardConfigAccel BOARD_CONFIG_ACCEL = {
|
|
.accel_config = {
|
|
.axes_offsets[AXIS_X] = 0,
|
|
.axes_offsets[AXIS_Y] = 1,
|
|
.axes_offsets[AXIS_Z] = 2,
|
|
#if IS_BIGBOARD
|
|
.axes_inverts[AXIS_X] = false,
|
|
.axes_inverts[AXIS_Y] = false,
|
|
.axes_inverts[AXIS_Z] = false,
|
|
#else
|
|
.axes_inverts[AXIS_X] = true,
|
|
.axes_inverts[AXIS_Y] = true,
|
|
.axes_inverts[AXIS_Z] = true,
|
|
#endif
|
|
// This is affected by the acceleromter's configured ODR, so this value
|
|
// will need to be tuned again once we stop locking the BMA255 to an ODR of
|
|
// 125 Hz.
|
|
.shake_thresholds[AccelThresholdHigh] = 64,
|
|
.shake_thresholds[AccelThresholdLow] = 0xf,
|
|
.double_tap_threshold = 12500,
|
|
},
|
|
.accel_int_gpios = {
|
|
[0] = { GPIOA, GPIO_Pin_6 },
|
|
[1] = { GPIOA, GPIO_Pin_3 },
|
|
},
|
|
.accel_ints = {
|
|
[0] = { EXTI_PortSourceGPIOA, 6 },
|
|
[1] = { EXTI_PortSourceGPIOA, 3 }
|
|
},
|
|
};
|
|
|
|
static const BoardConfigActuator BOARD_CONFIG_VIBE = {
|
|
.options = ActuatorOptions_Pwm,
|
|
.ctl = { 0 },
|
|
.pwm = {
|
|
.output = { GPIOA, GPIO_Pin_7, true },
|
|
.timer = {
|
|
.peripheral = TIM14,
|
|
.config_clock = RCC_APB1Periph_TIM14,
|
|
.init = TIM_OC1Init,
|
|
.preload = TIM_OC1PreloadConfig
|
|
},
|
|
.afcfg = { GPIOA, GPIO_Pin_7, GPIO_PinSource7, GPIO_AF_TIM14 },
|
|
},
|
|
.vsys_scale = 3300,
|
|
};
|
|
|
|
static const BoardConfigActuator BOARD_CONFIG_BACKLIGHT = {
|
|
.options = ActuatorOptions_Pwm | ActuatorOptions_Ctl,
|
|
.ctl = { GPIOB, GPIO_Pin_13, true },
|
|
.pwm = {
|
|
.output = { GPIOC, GPIO_Pin_6, true },
|
|
.timer = {
|
|
.peripheral = TIM3,
|
|
.config_clock = RCC_APB1Periph_TIM3,
|
|
.init = TIM_OC1Init,
|
|
.preload = TIM_OC1PreloadConfig
|
|
},
|
|
.afcfg = { GPIOC, GPIO_Pin_6, GPIO_PinSource6, GPIO_AF_TIM3 },
|
|
},
|
|
};
|
|
|
|
#define ACCESSORY_UART_IS_SHARED_WITH_BT 1
|
|
static const BoardConfigAccessory BOARD_CONFIG_ACCESSORY = {
|
|
.exti = { EXTI_PortSourceGPIOA, 11 },
|
|
};
|
|
|
|
static const BoardConfigBTCommon BOARD_CONFIG_BT_COMMON = {
|
|
.controller = DA14681,
|
|
.reset = { GPIOC, GPIO_Pin_5, true },
|
|
.wakeup = {
|
|
.int_gpio = { GPIOC, GPIO_Pin_4 },
|
|
.int_exti = { EXTI_PortSourceGPIOC, 4 },
|
|
},
|
|
};
|
|
|
|
static const BoardConfigBTSPI BOARD_CONFIG_BT_SPI = {
|
|
.cs = { GPIOB, GPIO_Pin_1, false },
|
|
};
|
|
|
|
static const BoardConfigMCO1 BOARD_CONFIG_MCO1 = {
|
|
.output_enabled = true,
|
|
.af_cfg = {
|
|
.gpio = GPIOA,
|
|
.gpio_pin = GPIO_Pin_8,
|
|
.gpio_pin_source = GPIO_PinSource8,
|
|
.gpio_af = GPIO_AF_MCO,
|
|
},
|
|
.an_cfg = {
|
|
.gpio = GPIOA,
|
|
.gpio_pin = GPIO_Pin_8,
|
|
},
|
|
};
|
|
|
|
static const BoardConfigSharpDisplay BOARD_CONFIG_DISPLAY = {
|
|
.spi = SPI2,
|
|
.spi_gpio = GPIOB,
|
|
.spi_clk = RCC_APB1Periph_SPI2,
|
|
.spi_clk_periph = SpiPeriphClockAPB1,
|
|
|
|
.clk = { GPIOB, GPIO_Pin_10, GPIO_PinSource10, GPIO_AF_SPI2 },
|
|
.mosi = { GPIOB, GPIO_Pin_15, GPIO_PinSource15, GPIO_AF_SPI2 },
|
|
.cs = { GPIOB, GPIO_Pin_9, true },
|
|
|
|
.on_ctrl = { GPIOA, GPIO_Pin_0, true },
|
|
.on_ctrl_otype = GPIO_OType_PP,
|
|
};
|
|
|
|
#define DIALOG_TIMER_IRQ_HANDLER TIM6_IRQHandler
|
|
static const TimerIrqConfig BOARD_BT_WATCHDOG_TIMER = {
|
|
.timer = {
|
|
.peripheral = TIM6,
|
|
.config_clock = RCC_APB1Periph_TIM6,
|
|
},
|
|
.irq_channel = TIM6_IRQn,
|
|
};
|
|
|
|
extern DMARequest * const COMPOSITOR_DMA;
|
|
extern DMARequest * const SHARP_SPI_TX_DMA;
|
|
|
|
extern UARTDevice * const QEMU_UART;
|
|
extern UARTDevice * const DBG_UART;
|
|
extern UARTDevice * const ACCESSORY_UART;
|
|
|
|
extern UARTDevice * const BT_TX_BOOTROM_UART;
|
|
extern UARTDevice * const BT_RX_BOOTROM_UART;
|
|
|
|
extern I2CSlavePort * const I2C_AS3701B;
|
|
|
|
extern const VoltageMonitorDevice * VOLTAGE_MONITOR_ALS;
|
|
extern const VoltageMonitorDevice * VOLTAGE_MONITOR_BATTERY;
|
|
|
|
extern const TemperatureSensor * const TEMPERATURE_SENSOR;
|
|
|
|
extern QSPIPort * const QSPI;
|
|
extern QSPIFlash * const QSPI_FLASH;
|
|
|
|
extern SPISlavePort * const DIALOG_SPI;
|