28 Commits

Include renames

Author	SHA1	Message	Date
6 people	6c84c7d5d8	model: add Qwen3.8-Flash-Next (qwen4exp) (#27742) ... * gguf: add qwen4exp (Qwen3.8-Flash-Next) arch and converter Adds the GGUF-side plumbing for HF model_type qwen4_exp: - MODEL_ARCH.QWEN4EXP plus tensors for the low-rank hyper-connection variant (hc_*_norm/down/up/inject) and the PLE n-gram hash embeddings. The DeepSeek-V4 hc_*_fn/base/scale tensors are a different parameterisation, so these are separate entries rather than reuse. - Reuses the existing indexer, per_layer_token_embd, SSM and compress_ratios keys unchanged. - conversion/qwen4exp.py inherits the Qwen3.5 linear-attention V-head reorder and interleaved mrope, concatenates the 128 PLE embedding shards, and splits index_qk_proj into separate indexer q/k tensors. The PLE hash multipliers reach ~2.4e13. prepare_tensors() casts every non-float dtype to float32 before modify_tensors() runs, and GGUF array writes infer INT32 from Python ints, so both paths are bypassed: the constants are read from the pre-cast lazy tensors and written as explicit UINT64 arrays. Additive only; no existing arch changes behaviour. * llama: load qwen4exp (Qwen3.8-Flash-Next) hparams and tensors Adds LLM_ARCH_QWEN4EXP with its hparams and tensor loading. The graph comes in the next commit; this makes the model load and report correct metadata. - hyper-connections set n_embd_out_impl = hc_count * n_embd, so the residual stream is 4x wide and there is no output_norm: the final mixer's hc_norm is the last norm in the model. - registered as hybrid and given the same recurrent/attention memory filters as Qwen3-Next and Qwen3.5. - reuses the existing indexer, per_layer_token_embd, SSM and compress_ratios keys as-is. - the PLE table row count is read back from the file rather than recomputing the vocab padding rule. llama-model-loader gains UINT64 array support. That branch previously threw, so no existing caller changes behaviour; it is needed because the PLE hash multipliers do not fit in int32. * qwen4exp: shorten comments * llama: qwen4exp text graph with hyper-connections, GDN and MoE Implements the decode graph for Qwen3.8-Flash-Next: the hyper-connection residual stream, gated delta net layers, the MoE block with its gated shared expert, and dense full attention. The QSA indexer and the PLE n-gram embedding are not wired up yet and land in later commits. Hyper-connections are implemented here rather than shared with deepseek4.cpp. The two formulations agree on the [n_embd, hc, n_tokens] layout and little else: DeepSeek-V4 mixes with a full-rank projection and Sinkhorn-normalises it, whereas this model uses a low-rank down/silu/up sigmoid gate and collapses by a plain mean. Only the ~10 line stream mean is genuinely common, so sharing would mean touching DSV4's hot path and its three fused CUDA ops to reuse very little. What is reused is the substantive part: the LLM_KV_HYPER_CONNECTION_* keys, the n_embd_out_impl wide-residual support already in the loader, and the layout convention. Also allows a checkpoint to carry no PLE layers at all, which makes it possible to bring the graph up and validate it in stages. Validated against vLLM, the only working reference implementation. On a scaled-down model with an init scale large enough to give non-uniform logits, agreement with vLLM sits at the numerical noise floor: llama.cpp f32 against its own bf16 gives 84.3% top-1 agreement over 255 positions, and this graph against vLLM gives 85.1%. The comparison was calibrated by seeding three deliberate bugs (silu instead of sigmoid on the delta net gate, dropping the 1/hc scale in the mix, dropping the 2x in the combine); each drops top-1 to between 0% and 11%, an order of magnitude below the floor. * llama: qwen4exp PLE n-gram hash embedding Adds the per-layer embedding: a custom I32 graph input hashes each token with its ngram_size-1 predecessors host-side and the result is a plain row gather over the shared table, the same shape gemma3n's per-layer embedding uses. The hash has to run on the host because the splitmix64-derived multipliers reach 2^45, so the products need 64-bit integers and an xor, neither of which ggml has. Predecessors that fall outside the ubatch come from a small per-sequence history on the model, mirroring the per-request ngram_context the reference carries. It is only trusted when contiguous with the incoming position, so a fresh prompt or a rewound cache falls back to EOS padding rather than hashing against stale tokens. The depthwise conv is written out as a sum of shifted, per-channel-scaled copies rather than through ggml_conv_1d_dw, which carries a correctness warning upstream. Verified two ways. The row indices match a transcription of the reference's tensor formulation exactly, 1024 of 1024 rows, including sequences with EOS tokens sprinkled through them to exercise the segment reset. Separately, with PLE placed on layer 0 so its input is just the token embedding, ple_embd and ple_gated_value match a PyTorch computation from the same checkpoint to every printed digit. End to end over 1023 scored positions the port sits the same distance from vLLM with PLE as without it, 6.3 points of top-1 against 6.0, so PLE costs no accuracy relative to the rest of the model. That common offset is vLLM's bf16 activations, which cannot be removed: its QSA kernel refuses float32. Two bugs found along the way, both caught by the row-index check. The history was read and updated in the same pass, so a token early in a ubatch could pick up an earlier token of that same ubatch as prior context; it is now snapshotted first. And an EOS token was cutting its own context, where the reference takes the last EOS strictly before the position, so a boundary only hides tokens from the positions after it. Known gap: the conv carries no state across ubatches, so it is exact only for a prefill that starts at position 0. Chunked prefill and decode need the conv state wired into the recurrent memory, and the conv branch itself is still numerically unverified because the fixture zeroes its weights. * llama: carry the qwen4exp PLE conv state across ubatches The PLE depthwise conv was zero-padding on the left, which is only right for a prefill that starts at position 0. Decode and chunked prefill saw a truncated history for the first (kernel-1)*ngram_size positions of every ubatch. The PLE module sits on a layer that is also a delta-net layer, so both need a conv history in the same recurrent row. Rather than plumb a per-layer state size through build_rs and build_conv_state, the row is widened once and each convolution addresses its own slice through a local helper. n_embd_r() gains the extra span, which is zero for every other architecture because it is derived from ple_n_heads. Verified by feeding the same 1024 token sequence in chunks instead of one shot: at 64 tokens per decode the logits are bit-identical to the single-shot run, 1023 of 1023 top-1 and a maximum logprob deviation of exactly zero. At one token per decode they differ slightly, but the no-PLE model differs more under the same test (94.6% against 97.1%), so that is the usual gemv-versus- gemm accumulation difference and not the state. The conv branch is also no longer unverified. With non-zero conv weights the port sits 6.3 points of top-1 below the numerical floor, the same distance as with the weights zeroed and as the model with no PLE at all, so the branch adds no error of its own. test-llama-archs passes every existing architecture at 0.00e+00, including the delta-net models that share this code path. * llama: fix the qwen4exp PLE conv state and unblock test-llama-archs build_rs writes into the state tensor in place, zeroing one row and copying the carried-over states, so calling it twice for the same layer let the second call clobber the first write-back. The PLE layer is also a delta-net layer, so that is exactly what happened: both convolutions gathered the same row. They now share a single gather per layer. The earlier claim that the conv state was carried correctly was tested on a fixture whose conv weights are zero, where the branch contributes nothing and chunking matches trivially. Re-running with non-zero conv weights showed the divergence, growing with the number of ubatch boundaries: 97.1% top-1 at one boundary down to 90.2% at seven. With the shared gather it is bit-identical to the single-shot run at every chunk size tried, 512, 128 and 64, with a maximum logprob deviation of exactly zero over 1023 positions. The delta-net-only model stays bit-identical too, so nothing regressed there. Also derive the delta-net conv channel count the way load_arch_tensors sizes wqkv instead of from ssm_d_inner. The two agree for this model, but n_embd_r() only bounds the row and the convolution has to match the tensor feeding it. test-llama-archs previously aborted on this architecture and took every later architecture with it. qwen4exp is marked MoE-only, given the hyper-connection keys and an ssm_d_inner consistent with its tensor derivation, and skipped for now: the hyper-connection keys written by get_gguf_ctx are not reaching the synthesised file, which needs a separate look. The suite completes again, 124 architectures at 0.00e+00. * llama: optional indexer key cache in llama_memory_hybrid Groundwork for qwen4exp's QSA sparse attention. Its indexer needs a per-token key history for the full-attention layers, but a hybrid model cannot use llama_kv_cache_dsa: that class derives from llama_memory_i rather than llama_kv_cache, and llama_memory_hybrid constructs its attention cache directly. No existing architecture pairs recurrent state with a sparse indexer, so there was nothing to reuse wholesale. llama_memory_hybrid therefore gains a third, optional cache, shaped the same way llama_kv_cache_dsa shapes its lightning-indexer cache: a copy of hparams with n_head_kv forced to 1 and n_embd_head_k_full set to indexer_head_size. It is built only when a filter_idx callback is passed, which defaults to nullptr, so every existing architecture gets exactly what it got before. The per-sequence operations and the batch preparation forward to it under a null check, matching how the DSA cache prepares its two caches over the same ubatches. test-llama-archs passes all 124 architectures at 0.00e+00, including the 12 in the hybrid family that share this code. The qwen4exp fixtures are unchanged: same logits against vLLM, and chunked evaluation still bit-identical to single-shot. * llama: QSA sparse attention for qwen4exp The full-attention layers of this model do not attend to everything. An indexer scores one mean-pooled key per block of compress_ratio tokens and keeps a budget of the best blocks, plus the tail of tokens that do not yet form a complete block. Below indexer_top_k + compress_ratio - 1 cached tokens every block fits in the budget, so the result is exactly dense. What is reused rather than rebuilt: - the mask machinery. build_attn's DSA overload already turns a list of token indices into a KQ mask via ggml_set_rows, so that block is lifted out verbatim into build_attn_mask_top_k and shared with a new overload on llm_graph_input_attn_kv. DSA's node sequence is unchanged; the new overload exists because llama_kv_cache_dsa assumes MLA and cannot be dropped into a hybrid model. - the indexer key cache, which is the optional third cache added to llama_memory_hybrid in the previous commit. It holds raw keys, because pooling happens before the norm and the rotation. The graph expands block scores rather than block indices: giving every token of a block its block's score needs only a gather, where expanding indices would need an integer multiply-add that ggml has no op for. Since the budget is a whole number of blocks and a block's members tie exactly, the cut still lands on a block boundary. Everything that depends on cache layout is computed host-side in set_input_qsa. Blocks are cuts of the position line rather than of the cell array, so nothing assumes the cache is contiguous. Measured on the tiny fixture against vLLM, comparing the selected token indices directly rather than the logits: below the budget selection identical, and 1024-token logits are bit-identical to the pre-QSA dense path above the budget mean jaccard 0.975 The direct index comparison is what made this correct. The reference rectifies each head's dot product before summing over heads, which an earlier reading of it had missed; on logits alone the resulting port looked fine, because on a randomly initialised fixture the known-correct dense path already disagrees with vLLM by more than the bug did. Comparing the indices showed 0.794, and fixing the ReLU moved it to 0.975. * llama: give the qwen4exp indexer cache the attention cache's slots The indexer cache found its own slots, independently of the attention cache. Both are the same size and see the same ubatches, so in a straight-through prefill they agree, which is why every fixture and every single-shot parity run passed. They drift once the context is being rewritten between turns, and then the QSA top-k indices, which are applied against the attention mask, point at the wrong cells. The seven-turn chat test caught it on the third turn: llama-server aborted on the assertion that the two caches report the same n_kv. The cache is a side buffer addressed by the attention cache's cells, so it now takes that cache's slot layout instead of computing one. Applying that layout also marks its cells identically, so the two agree cell for cell by construction rather than by coincidence, and the assertion can no longer fire. Inert where the caches already agreed: test-llama-archs green at 126 archs and 0.00e+00, and the 4096-token tiny fixture is unchanged at max logit delta 0.0. * tests: record what the qwen4exp arch-test skip actually observes The old note guessed that the hyper-connection keys never reach the file. They do: dumping the gguf_context handed to llama_model_init_from_user shows both among its 67 KVs, and the loader still reports one missing. * tests: cover qwen4exp in test-llama-archs The arch was skipped with a note guessing that the hyper-connection keys never reached the synthesised file. They did. The suite builds a model, then saves and reloads it, and llama_model_saver did not re-emit those keys, so the failure was in the roundtrip leg rather than the first load. Three gaps, all in shared code and all additive: - add_kv_from_model wrote no hyper-connection, compress-ratio or PLE keys. The PLE group only means anything whole, so it is written or omitted together; the rest follow the file's existing style of writing every key unconditionally, since an architecture that does not read one is unaffected by a zero. - the saver had no uint64 path at all, which the PLE hash constants need. - add_tensors_from_model enumerates model-level tensors by hand and was missing per_layer_tok_embd and the three final-mixer tensors. Two smaller fixes on the qwen4exp side, both found by running the test: - build_qsa_top_k divided by the compression ratio before asserting it was non-zero, so a file without the key crashed instead of reporting. - a layer with no compression ratio now falls back to dense attention, which is what the model computes below the budget anyway. The test then has to write a ratio to reach QSA at all, and an indexer key length no narrower than n_rot, since the indexer ropes with the main attention's rotary width. Full suite: 126 archs, qwen4exp at 0.00e+00 with roundtrip OK. The tiny fixture is unchanged, max logit delta 0.0 against the pre-QSA dense run. * convert: stream the qwen4exp PLE table instead of concatenating it The n-gram table arrives as 128 shards that were held in a dict and then torch.cat-ed, so the peak was the shards plus the concatenation: around 300 GB of RSS on the real checkpoint, which rules out machines that could otherwise convert this model. Each shard is now written straight into a memory-mapped file at its final row offset and dropped, so the resident set is one shard and the rest is the page cache's problem. The temporary file sits beside the output and is removed once the write finishes, including on failure. Shards other than the last must be uniform for direct placement, which is asserted rather than assumed, and a shard arriving before the stride is known is held instead of misplaced. Verified on the tiny fixture: the resulting GGUF is byte-identical to the one the concatenating path produced (md5 2d274efac91ad1e9a6007efb0687e597). * quantize: fall back to F16 for 32-block types with an odd ncols tensor_type_fallback demotes a tensor whose ncols is not a multiple of the target's block size, but its switch only enumerates the 256-block types. A target that is already a 32-block type (iq4_nl, q4_0, q5_0, q8_0, ...) falls into default: and throws, even though the function already knows how to answer that case: the ncols check right below the switch resolves an unrepresentable shape to F16. Route those types into that check instead of throwing. Only paths that abort today change, so no quantization that currently succeeds is affected. Found on a 4-wide depthwise conv kernel. llama-quantize reported nothing but "failed to quantize model from ...", with no tensor name and no exception text, which made a quant recipe that had simply not pinned the tensor look like a corrupt model. It now names the tensor and continues. * quantize: let --tensor-type name per_layer_token_embd per_layer_token_embd shares the TOKEN_EMBD category with token_embd.weight, so --token-embedding-type is returned for it before any --tensor-type pattern is consulted, and there is no way to give it a tier of its own. That grouping is fine as a default and stays the default. It is a poor fit for the size, though: on qwen4exp the table is 97.7 GiB of a 337.6 GiB BF16 file and about 46% of a 4-bit one, roughly eighty times token_embd.weight, and it is read by ggml_get_rows rather than a matmul so no imatrix ever covers it. Allow an explicit --tensor-type pattern to name it, and only it. Nothing changes unless such a pattern is passed, and token_embd.weight keeps the old precedence in either case. Measured on Qwen3.8-Flash-Next, Q4_K_M with an imatrix: the table lands at q8_0 (51.9 GiB, 113.5 GiB total) by following --token-embedding-type, and pinning it q4_1 gives 30.5 GiB for 92.1 GiB total, 19% off the file. * quantize: size the output buffer exactly instead of nelements * 4 The per-tensor output buffer was sized `nelements * 4`, described as an upper bound. It is a very loose one: the output is at most 2 bytes per element (f16/bf16) and usually well under 1.1 (q8_0 and below), so between 2x and 4x of it is never touched. The exact size is already known here, since it is what the quantization loop writes, what new_size sums to, and what the GGUF metadata is asserted against a few lines later. On a model whose largest tensor is a few GB none of this matters. On Qwen3.8-Flash-Next it does: per_layer_token_embd is 51.2 G elements, so the buffer was 205 GB where 54 GB is needed at q8_0 and 32 GB at q4_1. Measured on that model, VmHWM of a live llama-quantize was 485 GB per process. Three of them fit in 2 TB and five did not, which is what an OOM-killed quant ladder looks like. This removes about 150 GB of that. Byte-identical output, verified against the same binary built at the parent commit: q4_K, q8_0, q5_K, q6_K and IQ4_XS, over BF16 and F32 sources, with and without a PLE table present. Six cases, six matching md5s. * qwen4exp: hash the image placeholder for multimodal batches The PLE row indices are computed host-side from ubatch->token, and set_input returned early when that was null. A multimodal ubatch is exactly that case: the mtmd layer consumes the image placeholder ids and hands llama_decode embeddings instead. The early return left the I32 index tensor uninitialised, so ggml_get_rows indexed a 320 M row table with whatever the buffer happened to contain, and aborted: GGML_ASSERT(i01 >= 0 && i01 < ne01) failed ggml_compute_forward_get_rows mtmd_helper_decode_image_chunk -> llama_decode Every image request crashed. Nothing caught it because the vision work had only ever been verified by converting an mmproj, never by running one. The reference computes the hash over input_ids, where those positions still hold the image placeholder, so carry that id through as qwen4exp.ple.image_token_id and hash it. The key is optional: a file converted before it existed falls back to the PLE EOS token, which is defined and treats the image as a segment boundary rather than crashing. Verified end to end with llama-mtmd-cli, a Q4_K_M base and the F16 mmproj, on a generated image with known content. The model names the red circle, the blue square, the inverted green triangle and reads "UNSLOTH 42", each with the right position. * qwen4exp: support a non-unified KV cache in QSA set_input_qsa asserted n_stream == 1, so llama-server could not serve this model with more than one slot unless -kvu was passed. With a non-unified cache each sequence owns its own cells, and a cell index means a different token in each stream, so a single shared mapping is wrong. - cell_blk, blk_cells and bias gain a stream dimension. At n_stream == 1 these collapse to the shapes they had, so the unified path is unchanged. - Scoring is now batched over streams. ggml_mul_mat matches ne[2] on both operands, so stream s's queries only ever meet stream s's blocks; without this sequences would score against each other's context. - set_input_qsa loops per stream and resolves cells through v_cells[seq_to_stream[seq_id]], following set_input_kq_mask_impl, instead of hardcoding v_cells[0]. - llama_kv_cache_context::get_n_stream() is added, mirroring the ns that get_k and get_v already derive from the slot info. build_attn_mask_top_k needed no change: it already expects [n_top_k, n_batch, 1, n_stream], so the top-k result is reshaped to meet it. set_input_qsa has exactly one caller, so the blast radius is qwen4exp only. Validation, UD-Q4_K_XL on one B200: - unified cache unchanged within noise: 1802.9/68.85 -> 1807.2/69.11 t/s at batch 1, 2262.5/192.43 -> 2270.1/193.75 at batch 4. - non-unified now runs at npl 1, 4, 16 where it previously aborted, and is 22% faster than the -kvu workaround at batch 16 (1205 vs 984 t/s total), since per-stream cells avoid the cross-sequence masking a unified cache pays for. - no cross-stream contamination: four concurrent sequences each carrying a distinct secret all recall their own and no other, on both cache modes. - test-llama-archs green on qwen4exp, deepseek2, gemma3n, qwen3next, llama. Note on testing: comparing concurrent output against solo output exactly is not a valid check. It failed 0/4 with no bug present, and the unified-cache control failed the same way, because batch composition changes the floating-point reduction order and near-tied tokens flip. The contamination test above is what the exit code gates on. * llama: keep the qwen4exp top-k attention mask arch-local The QSA graph needed a build_attn that attends only to the cells named by a top_k tensor, and the first version got it by adding a llm_graph_input_attn_kv overload to llm_graph_context and factoring the mask construction out of the existing MLA sparse path into a shared build_attn_mask_top_k. That put a new arch on the shared attention path and made the deepseek32 and glm-dsa attention build depend on a helper introduced for qwen4exp. Build the mask in src/models/qwen4exp.cpp instead and leave llama-graph.{h,cpp} exactly as they were: the MLA path keeps its own copy of the same node sequence. The nodes emitted are unchanged, so this is bit-identical. * llama: hold the qwen4exp indexer cache in a new llama_memory_hybrid_idx The indexer key cache was added by extending llama_memory_hybrid with an optional third cache, and the host-side cell/block mapping that drives QSA was added as set_input_qsa on llama_kv_cache. Both are shared classes that every hybrid and every attention model goes through. Move both into a new memory type, llama_memory_hybrid_idx, following llama_kv_cache_msa: the indexer cache and the pos<->cell translation live with the sparse-attention memory rather than in the classes that serve every other architecture. llama-kv-cache.{h,cpp} and llama-memory-hybrid.{h,cpp} are restored to their unmodified state. init_batch is repeated from llama_memory_hybrid because the indexer cache has to be handed the attention cache's slot infos, and those are not reachable through the context the base returns. Allocating them separately lets the two caches drift, which is what pointed QSA's top-k at the wrong cells before. The context derives from llama_memory_hybrid_context so build_inp_mem_hybrid keeps working unchanged, and get_n_stream is computed from the slot infos exactly as llama_kv_cache_context did. Behaviour is unchanged: logits over an 8192-token sequence are bit-identical to the previous implementation, sparse and dense alike. * llama: save and restore the qwen4exp indexer KV cache llama_memory_hybrid_idx forwarded clear, seq_rm, seq_cp, seq_keep, seq_add and seq_div to the indexer cache but not state_write / state_read, so a saved session dropped the indexer keys and a restored one selected QSA top-k against an empty cache. The effect is invisible until the context passes indexer_top_k + compress_ratio - 1 cells, because QSA is exactly dense below that and the indexer contents cannot change the result. The indexer section is written last rather than next to the attention cache it mirrors. As a suffix, a reader that does not expect it stops early and the trailing bytes are caught by the size check in state_load_file; placed between the attention and recurrent sections it would instead be parsed as recurrent state, which can succeed and restore silent garbage. It follows the same LLAMA_STATE_SEQ_FLAGS_PARTIAL_ONLY gate as the attention cache, since a partial checkpoint deliberately skips the token-level attention caches. The indexer restores its own cells instead of taking the attention cache's restored slots. The two caches share size, padding and every sequence operation, and init_batch hands the indexer the attention cache's slot infos, so both state_read_meta calls run find_slot over identical occupancy and land on identical cells. The overrides live on llama_memory_hybrid_idx, the only memory type that owns an indexer cache, so llama_memory_hybrid and every architecture that uses it write and read exactly the bytes they did before. The session and sequence state versions are bumped because the qwen4exp state layout changed. The session path already rejects a short read via its size check, but llama_state_seq_load_file accepts one silently, so only the version check stops a pre-fix blob from being half-restored by a fixed build. (cherry picked from commit 2721542354f8e158c3217625f4e2e7b83e51e3fe) * llama: make the qwen4exp PLE n-gram history per context and serialise it The PLE hash of a token mixes in the ple_ngram_size - 1 tokens before it, which a decode ubatch does not carry, so they were remembered in a map on llama_model_qwen4exp. That is the wrong owner twice over. A llama_model is shared by every context that loads it, and the map was keyed only by llama_seq_id, so two contexts running the same sequence id - two server instances on one model, or a draft/target pair - overwrote each other's window. The next_pos guard turned that into EOS padding instead of a crash, so it degraded quality silently. The map was also in no state blob: grep found ple_hist in neither llama-kv-cache.cpp nor llama-memory-*.cpp nor llama-context.cpp. A restored context therefore failed the next_pos check on its first ubatch and hashed the first tokens after the restore against EOS padding. This is why a session blob round-tripped byte for byte while the restored context computed different logits: the state was never in the bytes. It moves to llama_memory_hybrid_idx, which is per context, is the memory type qwen4exp always builds, and already does the per-sequence bookkeeping this needs. Every sequence operation now carries the window with it: seq_rm a rewind (p1 < 0) truncates the window to the surviving prefix and moves next_pos to p0, so a rollback keeps exact context; a hole punched in the middle leaves the window non-contiguous, so it is dropped seq_cp the destination inherits the source's window, truncated to the copied position range - a copied sequence continues with the same n-grams the source would have used seq_keep every other sequence's window is dropped, like its cells seq_add a shift that moves the whole window keeps it and moves next_pos with it, which is the context-shift case; one that cuts through it drops it seq_div positions stop being consecutive, so an overlapping window is dropped clear everything is dropped Dropping means next_pos = -1, which set_input turns into full EOS padding: the same thing a fresh sequence gets, and the same thing this code did before it followed the sequence operations at all, so no case is worse than before. The state payload is a self-delimiting list, u32 count then per entry { i32 seq_id, i32 next_pos, u32 n_toks, i32 toks[n_toks] }, so a whole-context save and a single-sequence save share one format and a single-sequence restore can retarget the window at its destination seq_id. It is written after the indexer section, last, for the same reason that one is: as a pure suffix an older reader stops early instead of parsing these bytes as something else. Unlike the indexer section it is not under LLAMA_STATE_SEQ_FLAGS_PARTIAL_ONLY. The window is recurrent state - it is the input the PLE convolution's own recurrent state is derived from - and the recurrent cache beside it is written for partial checkpoints too. Gating it would leave the server's speculative decoding checkpoints restoring the conv state without the window that produced it. No further version bump: LLAMA_SESSION_VERSION 10 and LLAMA_STATE_SEQ_VERSION 3 were introduced for the indexer section in the same unreleased series, and both changes are qwen4exp-only additions to the same blob layout. Also fixes the padding of a short window. set_input pads a window shorter than ngram_size - 1 up to that length, but prev() indexes the snapshot with the most recent token last, and resize() pads at the back, so the filler EOS landed where the immediately preceding token belongs. It now pads at the front. A window is short at a sequence start after a one-token prefill, and after a seq_rm rewind, which the new bookkeeping makes common. Every architecture other than qwen4exp builds llama_memory_hybrid rather than llama_memory_hybrid_idx, has no PLE table and never asks for a history, so nothing about its graph, its sequence operations or its state bytes changes. (cherry picked from commit de170364c052c68fcf63285cc0028095edb9f23c) * qwen4exp: tidy comments and simplify image token read Rewrite the comments this series adds to the AGENTS.md rules: one or two lines, no prose hard-wrapped mid-sentence, no narrative or history, and no comment that only restates the code. Net 146 fewer comment lines, no code change. Correct the PLE image comment: mtmd does not consume the placeholder ids. An image is decoded as an embeddings-only batch, so ubatch->token is null and the per-position ids never exist here. gemma3n and gemma4 hit the same case and stand in row 0 of per_layer_token_embd; qwen4exp stands in the configured image token id instead. Read image_token_id straight from self.hparams in the converter. base.py merges text_config into the root of hparams, and the key sits at the root of config.json, so the config.json re-read was redundant. (cherry picked from commit 205840c12169057da3e8d2f65ec4ceec3e18b980) * qwen4exp: support a quantized KV cache in the QSA attention path (cherry picked from commit 4c30574f81dc1115d08078c47b6cf8c789c0a842) * llama: give qwen4exp a large-graph node budget (cherry picked from commit 37c8c194e6a30e4c46ac29bee3fb264f091596ef) * qwen4exp: drop an unused variable that breaks -Werror builds (cherry picked from commit 528d032b51fa3cf935ed3ef6e0fb1c7401df53b5) * quantize: dequantize and quantize large tensors in row bands f32_conv_buf held the whole dequantized tensor, which is 204.8 GB for per_layer_token_embd alone and dies with std::bad_alloc long before the work buffer is reached. Dequantize and quantize in bands of whole rows instead, capping the f32 staging at 1 GiB per band. Rows are independent and the imatrix is indexed by column, so band boundaries cannot change any output byte. Bands nest inside the existing per-expert loop so each expert slice keeps its own imatrix, and a band is kept to at least one quantization chunk per worker thread so the existing multithreading still has work. F32 sources still stage nothing and are banded by pointer arithmetic into the tensor. llama_tensor_dequantize_impl now takes a first element offset; the single caller is updated. (cherry picked from commit 658c22549613555dbce57a772be4de8509eba3ee) * llama: segment the qwen4exp fused QKV for tensor split qwen4exp was missing from the gated delta net branch of get_split_segments, so its attn_qkv.weight, shaped {n_embd, 2*key_dim + value_dim}, fell through to the generic fused QKV rule and tripped GGML_ASSERT(tensor->ne[axis] == n_embd + 2*n_embd_gqa) while loading with --split-mode tensor. --split-mode layer was unaffected. qwen4exp broadcasts K to the V heads by tiling, k_conv is grown with a plain ggml_repeat_4d over the head axis so that v head j pairs with k head j % n_k_heads. That is the Qwen 3.5 pattern, not the repeat interleave that Qwen 3 Next builds explicitly, so qwen4exp takes the else branch and its V is segmented on the scale of K. Reported by benklop. (cherry picked from commit 353d753f595dc81634ae6130188b31f06018f5ae) * llama: fix the qwen4exp PLE history seq_rm(-1) iterator invalidation and the fatal-warning build ple_hist_rm recursed over ple_hist with a range-based for and the recursive call erases the entry it is iterating when the whole sequence is removed (p0 <= 0, p1 < 0), so the loop then increments an invalidated iterator. It is unreachable today only because llama_memory_recurrent::seq_rm rejects seq_id < 0 before llama_memory_hybrid_idx::seq_rm reaches the history, which is a guard in another class. Advance past the entry before recursing. Two smaller things in the same area: - the n_toks sanity bound in ple_hist_state_read was the literal 64, which is the value of LLAMA_MAX_PLE_HEADS, not of the quantity being checked. The window is at most ple_ngram_size - 1 tokens, so the bound is LLAMA_MAX_PLE_NGRAM - 1, eight times tighter. - build_conv_state_at left mem_size unused, so -DLLAMA_FATAL_WARNINGS=ON does not compile. Predates this series; drop the line. (cherry picked from commit 6eba44a89d5f328eb4859b844e1d28fb564cbe3e) * qwen4exp: include llama-impl.h explicitly for llama_mul_mat_hadamard (cherry picked from commit b634fd4d250d181ef82bf78bd00c1ae3b96a7af6) * convert: fix the qwen4exp lint and type-check failures flake8 flagged an unused MmprojModel import, and ty flagged seven errors in the PLE streaming path: eos_token_id can be absent, and _ple_map, _ple_path, _ple_row_dim and _ple_rows_per_shard are all Optional at the declaration but were dereferenced without narrowing. The map is opened and the stride fixed before the first shard is written, and _finish_ple_table only runs once every shard has landed, so the invariants hold. Assert them so the checker can see it. A missing eos_token_id now raises with the reason instead of a TypeError from int(None). * llama: give the qwen4exp indexer cache its own tensor names The indexer KV cache and the attention KV cache both named their tensors cache_k_l%d, so the Meta backend matched the indexer cache against the attention split pattern and aborted in handle_set_rows. Tag the names instead, and mirror the indexer cache: it has one key head and its projections are mirrored. (cherry picked from commit a1cdc8181134659766763a17762545a1f0e5db7b) * qwen4exp: double the Q split granularity for tensor parallelism qwen4exp fuses the attention gate into attn_q.weight the same way qwen3next and qwen 3.5 do, so a device boundary must fall on a whole q+gate pair or the Q heads stop lining up with the K/V heads and attn_output rows. (cherry picked from commit 6c9a592f0a425a459ab6efae3b897cf68460e244) * qwen4exp: keep the indexer cache in step across server slots The QSA indexer keeps a side cache addressed by the cells of the attention cache, so cell j has to hold the same token in both: the top-k indices it produces are applied to the attention KQ mask. init_batch already hands the indexer the attention cache's slot layout rather than letting it look for its own, but the restore path did not. state_read called llama_kv_cache::state_read on the two caches in turn and each ran its own find_slot over its own occupancy. That agrees only for as long as nothing has already pushed the two caches apart, which is the property a restore is supposed to re-establish rather than one it can lean on. The failure path was the worse half, and it is reachable from the public API with nothing more than a short buffer. Truncating a good blob at 35 offsets and feeding it to llama_state_seq_set_data left the two caches disagreeing at 5 of them, and every one of 23 truncations of a whole-context blob did. Four of those five land inside the attention section, so the attention cache drops the sequence and the indexer keeps it; only the cut that lands in the indexer section gives the opposite direction. llama_kv_cache::state_read cleans up its own cache and rethrows, so whichever way it falls, nothing is left to bring the two back together. The server papers over this by clearing the slot when a prompt cache load fails; a caller of llama_state_seq_set_data that does not is left with an indexer addressing cells that no longer mean what it thinks. llama_kv_cache::state_read_sinfo reports the cells a restore landed in, or takes a copy of them, and state_read_meta uses a supplied layout in place of find_slot once it has checked that those cells are free here too. The indexer now adopts the attention cache's restored layout by construction instead of reproducing it by coincidence, and a layout that does not fit fails the read rather than being applied over cells that already drifted. The hybrid restore is wrapped so that any failure drops the sequence, or for a whole-context restore the context, from all three caches at once, which is a state they do agree on. * kv-cache: clear the cache once when restoring a whole context state_read walks the streams of the cache in turn, and for a whole-context restore each stream went through state_read_meta, which starts by calling clear(). clear() resets every stream at once, so each stream after the first threw away the streams already restored, and the K/V buffers with them. A non-unified cache holds one stream per sequence, so a context saved with N sequences in it came back with only the sequence in the last stream that carried any cells - the highest sequence id. A unified cache has one stream and never showed it. The cache is now emptied once, before the loop, which is what a whole-context restore means. A blob whose streams are all empty now empties the cache as well, where before it left the old contents in place. * kv-cache: check the mirrored slot layout on a whole-context restore too state_read_meta only looked at the layout it was given on the single-sequence path. A whole-context restore lays the cells out from 0 in both caches, so they agree as long as they restore the same number of cells, but nothing checked that they did: an indexer section belonging to some other context was read over cells the attention cache had filled from a different one, which is the state the indexer must never be left in. * qwen4exp: give the PLE conv history its own mirrored recurrent row n_embd_r() reserved n_conv + ple_conv_state() so that one cache_r_l row could carry both the delta-net conv state and the PLE dilated conv history, but the QWEN4EXP arm of get_split_segments only described n_conv. Under -sm tensor the segment sum came up short by ple_conv_state() and llama_memory_recurrent construction aborted in ggml_backend_meta_alloc_ctx_tensors_from_buft. Widening the segment list is not the fix. The Meta backend propagates a view's split descriptor from its parent unchanged, so a view of one sub-range of a split axis is sized as the whole row on every device; declaring the PLE tail as a second segment merely moves the abort to "shape mismatch for VIEW" at graph allocation. The two histories also want opposite policies: the delta-net state is split by head to match wqkv and ssm_conv1d, while per_layer_tok_embd, ple_conv1d and ple_norm_conv are all mirrored, so every device computes the whole dilated conv and needs the whole history. One tensor cannot be both, and the split state has no per-segment mirroring. Move the PLE history into its own cache_ple_r_l%d row, mark it MIRRORED, and return n_embd_r() to n_conv. The row is allocated only on layers where is_ple holds, so mirroring one 92160-element row per device replaces a 92160-element tail on all 36 recurrent rows: the recurrent R footprint drops rather than grows. build_conv_state_at now takes its width from the tensor it was handed and keys its gather on that tensor, which also drops a cont of a strided view. * no more ple_hist (use master version) * llama: give the qwen4exp full memory context its indexer cache graph_reserve() walks a full memory context, and qwen4exp builds its sparse attention only when the context exposes an indexer cache. the full-context constructor left ctx_idx null, so the reserved worst case was the dense fallback: a smaller graph than the one decode executes. ggml-alloc then had to grow the compute buffer on the first decode, past the size reported at load. with -np 4 -c 32768 -fa on -ctk q8_0 -ctv q8_0 on an IQ1_S qwen4exp, the reserved CUDA0 buffer was 217.00 MiB against 275.71 MiB actually used, and CUDA_Host 42.31 MiB against 191.14 MiB. reserving the sparse graph makes both match exactly, in unified and non-unified cache mode. Co-authored-by: Pascal <[email protected]> Assisted-by: Claude * qwen4exp: shrink the PLE hparams storage llama_hparams is held by value inside llm_graph_params and every llm_graph_input_*, and llm_graph_params is a stack local in graph_reserve and process_ubatch, so its width is paid on every worker thread stack. is_ple_impl spent 2048 bytes carrying 512 bits. It is the one per-layer flag that is not moved through the loader's uint32 array templates, so a bitset costs nothing in call sites and also removes the uninitialized read that non-qwen4exp archs had, since nothing filled the array for them. The PLE head offsets and vocab sizes are token-space indices; the gather that consumes them already truncates to int32, so 64-bit storage was never reachable. The gguf arrays stay uint64 for file compatibility and are narrowed on load. sizeof(llama_hparams) 34440 -> 31944, sizeof(llm_graph_params) 34872 -> 32376. * llama: opt-in random-access mmap advice for host-resident gather tables qwen4exp keeps per_layer_token_embd on the host: 26.8 GiB at IQ4_NL, read by ggml_get_rows as 16 gathers of ~90-170 bytes per token, spread across 16 head regions ~20M rows apart. Measured over 4.75M gathers, no two consecutive gathers land on the same 4 KiB page, so the readahead the loader asks for buys nothing here and the whole table ends up cached to serve about 4% of itself. llama_mmap applies POSIX_FADV_SEQUENTIAL, MAP_POPULATE and a whole-file POSIX_MADV_WILLNEED unconditionally. Those are right for streaming the file once into buffers and wrong for whatever stays mapped afterwards. Under LLAMA_MMAP_RANDOM the eager pull-in is skipped and the mapping is advised random once every tensor has been read, so the load itself keeps its sequential readahead. That alone drops the table to 4.4% resident but serializes one NVMe latency per gather. The second half is what pays for it: the PLE input already computes every row index for the ubatch before the graph runs, so the pages those rows fall on are handed to the kernel in one batch and the reads overlap. POSIX_MADV_WILLNEED on POSIX, PrefetchVirtualMemory on Windows, which takes the discontiguous ranges in a single call. Off by default and off for every other model: the batched prefetch keys off "this mapping was advised random", which nothing sets unless the user opts in. -c 512 --chunks 60, cold, IQ1_S, mean of 3: default 35.3 s 26.82 GiB resident (100%) advice only 104.5 s 1.19 GiB resident (4.4%) advice + prefetch 34.2 s 1.19 GiB resident (4.4%) PPL 4.2346 +/- 0.07862 in all three. IQ1_S KLD is unchanged in every field, including Mean KLD 0.396070 +/- 0.001931 and Same top p 77.325%. * llama: narrow the random-access mmap advice to the gather table The advice was applied per mapping: every mapping the model kept got POSIX_MADV_RANDOM plus a whole-file POSIX_FADV_RANDOM, and the eager pull-in was skipped for every file. On qwen4exp that also hit token_embd.weight, which sits 0.33 GiB past the PLE table in the same shard and is read densely, not by sparse gathers. Measured over -c 512 --chunks 60 on IQ1_S it fell to 8.45% resident, against 100% with the feature off. A model now nominates its gather tables (qwen4exp: per_layer_tok_embd) and only those byte ranges are advised. The range is rounded out to whole pages, which on this model takes in 832 bytes before and 192 after. token_embd goes back to 86.55% resident and the PLE table still drops to 4.44%; smaps shows one VM_RAND_READ VMA of exactly the table instead of one over all 27.16 GiB that stays mapped. posix_fadvise is dropped from the narrowed path. POSIX_FADV_RANDOM ignores its offset and length and marks the whole open file, and the FMODE_RANDOM it sets is only read by page_cache_sync_ra() on the read() path, which a fault on a MADV_RANDOM vma never reaches. POSIX_FADV_ DONTNEED does take a range, so the drop mode keeps it. The eager pull-in is now skipped only for the files holding a nominated table, and re-issued as WILLNEED over the rest of such a file, so other shards load exactly as before. prefetch_rows() keys off the tensor being nominated rather than off a mapping-level flag, so the batched readahead lands only where the advice did. -c 512 --chunks 60, cold, IQ1_S, mean of 3, total wall: default 32.50 s whole mapping 30.05 s narrowed 30.35 s PPL 4.2061 in all three. IQ1_S KLD is bit-identical with the feature on and off, including Mean KLD 0.396070 +/- 0.001931 and Same top p 77.325%. tg128 73.65 +/- 0.33 narrowed against 73.49 +/- 0.34 whole. Assisted-by: Claude * llama: fold the random-access prefetch into its own feature flag LLAMA_MMAP_RANDOM_PREFETCH existed to measure the two halves of the feature apart, and the measurement is done: on a cold cache over the same wikitext run, MADV_RANDOM without the batched readahead takes 94.4 s against 36.7 s for an untouched mapping, while the pair together take 34.1 s. Suppressing the kernel's readahead only pays if we replace it, so the split let a user select a 2.6x regression through a documented switch. Keep the accessor, since the call site reads better than a mode comparison, but derive it from the mode alone. * FACP (Fewer Acronym Classes Please) * qwen4exp: bias the QSA selection per block, not per cell The QSA bias is a graph input, so it is pinned on the host and uploaded every decode, and at -c 32768 -np 4 its twelve copies were 768 of the 815 MiB of reserved host compute buffer. Only one half of it needs a cell: whether the cell sits in the always-visible tail, and whether its block was pooled. Both are properties of the block. The other half - empty, other sequence, or in the future - is the plain visible/not test the attention mask already carries over the same cells, so add that mask instead of repeating it. The bias then holds one value per block. A block sits wholly inside or wholly outside the tail because the tail starts on a block boundary, so one value per block is exact. Cells no block covers keep their -inf from the mask. The mask is F16 and the bias F32, and a mixed ggml_add reinterprets the F16 buffer as float rather than converting it, so the cast is required. reserved host compute buffer at -c 32768 -np 4: --kv-unified 814.86 -> 238.86 MiB, CUDA0 721.07 -> 421.07 MiB --no-kv-unified 214.86 -> 70.86 MiB, CUDA0 317.07 -> 265.07 MiB Selection is unchanged: over 8192 tokens, four times the budget, every QSA layer returns identical top-k indices and the logprobs are bitwise equal. Two things a reviewer should know. A cell whose position divides past the last block is guarded by an assert rather than handled, because no run reached it. And the mask's same-position M-RoPE rule cannot fire for text and was never exercised for images, so the 2D case is unverified. * clean up code comments * clean up new comments * revert LLAMA_MMAP_RANDOM * nits * replace some changes with #27795 * improve the m-rope image for get_prev_tokens * LazyChunkedTensor * fix lint * add some validations * reduce input nodes * trim output tokens * nits * some more sanity checks * fix llm_graph_input_ple reuse * exclude from webgpu test --------- Co-authored-by: danielhanchen <[email protected]> Co-authored-by: danielhanchen <[email protected]> Co-authored-by: Xuan Son Nguyen <[email protected]> Co-authored-by: Pascal <[email protected]> Co-authored-by: Sigbjørn Skjæret <[email protected]>	2026-08-27 21:32:31 +02:00
Xuan-Son Nguyen	fa88ae9368	convert: add @ModelBase.example (#27208) ... * convert: add @ModelBase.example * add docs * add more variants * BailingMoeV3ForCausalLM * rm pocket-tts	2026-08-17 10:15:11 +02:00
7 people	ad1de39e07	model: add Kimi-K3 text model (#26185) ... * model: add Kimi-K3 text model Hybrid KDA (linear) + MLA (full) attention as in Kimi-Linear-48B, plus five things that architecture does not have: 1. cross-layer residual attention (attn_res_block_size) 2. latent MoE (routed experts run at n_expert_latent) 3. situ activation (replaces SwiGLU everywhere) 4. MLA output gate (sigmoid gate before o_proj) 5. full-rank KDA gate (single ssm_g instead of ssm_g_a/ssm_g_b) K3's text_config reports KimiLinearForCausalLM - the older 48B architecture - so get_model_architecture routes on the top-level name instead. The KDA decay gate has two forms, selected by linear_attn_config's gate_lower_bound. It is not a clamp: when set it swaps the activation entirely (fla/ops/kda/gate.py), from -exp(A_log)*softplus(x) to lower_bound*sigmoid(exp(A_log)*x). K3 sets it to -5.0; kimi-linear leaves it unset, so that path is unchanged. Cross-layer residuals reuse ggml_dsv4_hc_pre for the weighted sum. That op is CPU + CUDA only, so Metal/Vulkan will fall back per-node until those kernels exist. The routed experts ship as compressed-tensors "mxfp4-pack-quantized". That is bit-compatible with ggml's MXFP4 - same E2M1 code assignment, same E8M0 scale byte, only the nibble positions within a block differ - so they are repacked rather than dequantized, losslessly and without a ~5.5 TB bf16 round-trip. The repack is built lazily because gguf_writer holds every added tensor until the final write. DeepSeek-V4 was already doing the identical bit-shuffling, so it now shares the helper. Verified against Moonshot's own code path (transformers + fla's Triton KDA kernels) on a tiny model exercising every K3-specific feature. Final-position logits vs the fp32 reference: 6.7e-05 rel / corr 1.00000000 for both the chunked and the recurrent delta-net path. MXFP4 blocks dequantize to the source weights with 0.0e+00 error. Assisted-By: Claude Opus 5 (1M context) <[email protected]> * model: fix ty errors in the Kimi-K3 converter - `_res_parts` buffers (kind, tensor) pairs, not bare tensors - `get_tensors` must return an Iterator, matching ModelBase - LazyBase's `func` takes one argument, so pass the expert loaders through `args` instead of the closure - borrowing KimiLinearModel.set_vocab from an unrelated TextModel is deliberate and safe, but not expressible in the signature No behaviour change: the MXFP4 repack still dequantizes to the source weights with 0.0e+00 error and end-to-end logits are unchanged (8.386e-03 rel, corr 0.99996630). Assisted-By: Claude Opus 5 (1M context) <[email protected]> * Update conversion/kimi_k3.py Co-authored-by: Boris Dvorkin <[email protected]> * Increase LLAMA_MAX_EXPERTS from 512 to 1024 * tests : support for Kimi K3 in archs test * chat : add Kimi K3 chat format (reasoning, content, typed tool calls) K3's assistant output is an XTML-ish tagged format built by the template's open_tag/close_tag macros. Two properties break generic parsing: 1. The generation prompt ends with open_tag('think'), so the completion starts inside the think section with no opening marker in the output (thinking_forced_open). 2. Only <|open|>/<|close|>/<|sep|>/<|end_of_msg|> are special tokens; tag names ("think", "response", "message") are ordinary text tokens. Adds common_chat_params_init_kimi_k3 (PEG_NATIVE) with detection on the marker trio, reasoning extraction, response unwrapping, and tool-call parsing of the tools/call/argument tag structure with argument types taken from the tool schema. Includes the K3 chat template fixture and 9 test-chat cases derived from real generations of the full 2.8T model. Verified end-to-end against Kimi-K3-Q2_K (GrEarl/Kimi-K3-GGUF) on 8x B200: content, reasoning_content, streaming deltas, and tool_calls all correct; finish_reason stop/tool_calls as appropriate. Co-Authored-By: Claude Fable 5 <[email protected]> * chat : add message_delimiters for Kimi K3 Per-role message-start markers for token-level span splitting. User and assistant messages carry only the role attribute, so their full opener (through <|sep|>) is used; system and tool messages continue with more attributes (type=/tool=/index=), so those delimiters stop after the role's closing quote. Verified against the K3 tiktoken vocabulary that the closing quote is always a standalone token across all attribute variants, so the token-level prefix match stays exact. Co-Authored-By: Claude Fable 5 <[email protected]> * fix: apply nits from @ngxson and text fixes from @danielhanchen * tests : added missing hyperparameters and tensors for Kimi K3 in test-llama-archs * chore : move overly verbose header file comments to Kimi K3 source file * tests : re-enabled KIMI_K3 in test-llama-archs for WebGPU backend * model-saver : emit kda_gate_lower_bound for Kimi K3 Quick fix. The Kimi K3 loader reads kda_gate_lower_bound and gates a graph branch on it (it scales the KDA gate when the bound is above -INFINITY), but the model saver never wrote the key, so a save->load roundtrip silently dropped it back to the -INFINITY default and changed the model's output. The real K3 config sets gate_lower_bound = -5.0. I propose to emit it from the saver, and set it to -5.0 in the test-llama-archs K3 case so the roundtrip check exercises it (the roundtrip fails without the saver line). * Refactor conditional for model architecture check * tests : re-enabled (again) KIMI_K3 and MINIMAX_M3 in test-llama-archs for WebGPU backend * fix code comments * add template on conversion * move repack_mxfp4_blocks to model base * nits * add_value_length * optimize res_stack construction * nits --------- Co-authored-by: Boris Dvorkin <[email protected]> Co-authored-by: Stanisław Szymczyk <[email protected]> Co-authored-by: Deepankar Singh <[email protected]> Co-authored-by: Claude Fable 5 <[email protected]> Co-authored-by: Caleb DeLeeuw <[email protected]> Co-authored-by: Xuan Son Nguyen <[email protected]>	2026-08-15 17:11:05 +02:00
lnigamandSigbjørn Skjæret	cc078b45b6	Dflash support for nemotron-3.5 (#26905) ... * conversion: skip untrained DFlash embeddings * Add Nemotron DFlash support * Add DFlash NVFP4 support * Address review comments * add missing output_s for nvfp4 * Include change for keeping residual for last layer also if requested in future dflash models * Update conversion/qwen.py Defensive check, not needed Co-authored-by: Sigbjørn Skjæret <[email protected]> * Fixing bug introduced by merge conflict --------- Co-authored-by: Sigbjørn Skjæret <[email protected]>	2026-08-11 18:46:26 +05:30
Xuan-Son NguyenandPascal	6e62ba5384	mtmd: support pocket-tts (#26871) ... * adapt the api * text model ok * working impl, need verify and clean up * mtmd: build the pocket-tts transposed convolutions as GEMM + col2im ggml_conv_transpose_1d has no grouped mode, so the depthwise upsample was built as one convolution and one concat per channel, which floods the graph with small nodes and makes kernel launches dominate the decoder. Fold both cases into the column form the seanet decoder already needs: the general case reshapes the kernel to [IC, K * OC] and matmuls it with the input, the depthwise case batches a matmul over the channels so a step scales its own kernel. A single col2im_1d then scatter-adds the columns back to the signal, with the same shape as before, so the overlap-add tail, the streaming state and the bias are untouched. Generation time per frame drops by 80% on CUDA and by 50% on CPU. The output matches the previous implementation sample for sample, with a correlation of 0.999994 and identical frame counts. * flow_temp + frames_after_eos * chunking * mtmd: carry the remaining pocket-tts per-pack settings The language packs also tune the end-of-speech padding and the padding of short prompts, next to the temperature already carried in the mmproj: french_24l asks for 8 tail frames instead of the guessed 3, english_2026-01 asks for short prompts to be padded with spaces. Write both in the mmproj as clip.gen.audio.frames_after_eos and clip.gen.audio.pad_short_text, keyed on the pack in the conversion script like the temperature. The loader keeps them optional, so a mmproj without them behaves as before. Map semicolons to commas for every pack instead, the reference only asks for it on three of them and it costs nothing elsewhere. Existing mmproj files must be converted again to carry the two keys. On a long french text the port now lands within 2% of the reference: 22.96s against 23.44s, with the same peak level and the same amount of silence. * clip.gen.audio.model_variant * clean up code comments * nit: drop the dead flow_temp hparam, the pack table holds the default * update docs * address security problems * less invasive base.py * lint * add mtmd_gen_inp_default * add docs * rm gen_flow_temp --------- Co-authored-by: Pascal <[email protected]>	2026-08-11 14:18:30 +02:00
4 people	b1d4c65524	model: Add MiniMax-M3 (MSA: MiniMax Sparse Attention) support (#24908) ... * Add preliminary MiniMax-M3 support Text-only port that re-uses existing components: MiniMax-M2 style GQA with per-head QK-norm and partial rotary, DeepSeek-V3 style leading-dense and routed/shared experts, and swigluoai activation. Sparse attention is not yet supported (dense fallback); vision tower and MTP heads are dropped. * MiniMax-M3 vision tower (mmproj + clip graph) * Delete m3_vision_ref.py * Update clip.cpp * MSA * Update constants.py * Update minimax.py * Cache creation. Working withotu flash attention * Added flash attention for sparse layers * Decomposed slow cpu OP into GPU + CPU ops. Massive speedup over long ctx * Rewrote indexer op to be cuda native. Modified flash attention to match per group block picking * Implement sparse attention calc out of stock ops. * Fix a cache allocation and cont issue * Fixed -fa auto crash, flagged debug spots * Delete vocab.json * Delete model.safetensors.index.json * Delete generation_config.json * Delete Minimax directory * Handled multi stream case to fall back on Dense Attention * Development scaffolding cleanup. No functional change to the decode or 4-way paths. Full debug harness remains at <8136a9c68ed7a5eb009aa67bba3fda8062f4648f> for reproducing the selection-parity validation. * Remove redundant comment from minimax-m3.cpp * Changed 3 Gelu Ops for vision into Gelu_erf ops * Assert that n_kv is multiple of 128 * Rename MSA index tensors to indexer convention Note: All GGUFs generated before this change will need to be regenerated. * Fix incorrect Assert * Review driven changes (#3) * Remove comment from conversion minimax.py Co-authored-by: Sigbjørn Skjæret <[email protected]> * Remove whitespaces from constants.py Co-authored-by: Sigbjørn Skjæret <[email protected]> * Tighten comment in minimax.py Co-authored-by: Sigbjørn Skjæret <[email protected]> * inherit MiniMax-M3 from MiniMax-M2 * drop dead text_config fallbacks * Add indexer writer methods * Reuse LLM_FFN_SWIGLU_OAI_MOE * Remove duplicate indexer setters, add only block_size/local_blocks, follow value naming convention * Fix conversion error /gguf_writer.py Co-authored-by: Sigbjørn Skjæret <[email protected]> * Update gguf-py/gguf/gguf_writer.py Co-authored-by: Sigbjørn Skjæret <[email protected]> * Update gguf-py/gguf/tensor_mapping.py Co-authored-by: Sigbjørn Skjæret <[email protected]> * Update conversion/minimax.py Co-authored-by: Sigbjørn Skjæret <[email protected]> * Update conversion/minimax.py Co-authored-by: Sigbjørn Skjæret <[email protected]> * Remove whitespace in src/llama-kv-cache.cpp Co-authored-by: Sigbjørn Skjæret <[email protected]> * Remove Whitespace in Update src/llama-model.h Co-authored-by: Sigbjørn Skjæret <[email protected]> * Remove whitespace in src/llama-hparams.h Co-authored-by: Sigbjørn Skjæret <[email protected]> * remove multimodal code upon maintainer request. Will be made as a separate PR * Whitespace clean in tensor_mapping.py * Log cache size on launch, block ctx shift, support prompt caching Log indexer cache size on launch Disallow ctx shift Support prompt caching * Update minimax-m3.cpp * Optimize implementation, add multi stream support. Fully rewrote minimax-m3.cpp for speed and buffer size gains: Unified the 4-way + decode, 1 FA call per layer instead of 4, with the groups mapped onto ne[3] Custom CPU op now emits block-level mask, expanded on GPU, which causes CPU to GPU transfer to shrinks at prefill Decode: ~25 nodes/layer vs ~50, no per-group concats/conts Unified selection semantics, so both regimes rank bs + local bias (position-anchored local force), which means prefill/decode can no longer disagree on selection can_reuse on the MSA bias input. Graph reuse at decode restored (was rebuilding the full graph every token) In-place mask adds, shrinking compute buffer ~6.8 to ~4.2 GiB at ub2048/62k Multi-stream: MSA now runs with -np N when kv_unified=false. Decode stays batched across streams (still 1 FA call), prefill loops per stream. dense fallback only for --kv-unified + multi-seq Measured effect on expert offload bound setup: decode 6.2(4WAY)–7.15(MSA_decode) -> 7.7~7.8 t/s, flat from 5k to 60k+. prefill around 10% faster. buffer about 20% smaller, multi-user support. * set default cache type to F32 * Fix potential DSA double indexer cache allocation bug, only allocate in-cache k_idx for archs that opt in * remove F16 downcasts in MSA attention, force F32 indexer score accum * Add Minimax eos to llama vocab * Guard edge case where idx cache can become stale after a tail trim * Update llama-kv-cache.h * Update llama-kv-cache.cpp * Update llama-kv-cache.cpp * Update llama-kv-cache.h * Update llama-kv-cache.cpp * Review driven changes * style fix * indexer hparams are required * fix tests * fix lint --------- Co-authored-by: Daniel Han <[email protected]> Co-authored-by: Sigbjørn Skjæret <[email protected]> Co-authored-by: Xuan Son Nguyen <[email protected]>	2026-07-26 19:43:45 +02:00
Joe Rowell	1f66c3ce1c	Add support for Laguna XS.2 & M.1 (#25165)	2026-07-22 09:54:08 +08:00
Thiago Padilha	cb489bc0fb	convert_hf_to_gguf: support split MTP export for HY V3 (#25641) ... - Add a supports_mtp_export capability to ModelBase so architectures can opt into --mtp and --no-mtp without extending a central class allowlist. - Enable the capability for the existing Qwen3.5/3.6 and Step3.5/3.7 implementations, and for HY V3, whose converter already supports filtering the appended MTP layers.	2026-07-14 11:43:15 +02:00
6 people	8c146a8366	DeepSeek V4 (#24162) ... * convert: add dsv4 conversion * add basic setup * add llm_graph_input_dsv4 * add save-load state * add sinkhorn eps - correction by @fairydreaming * add rope fix * cleanup dead code * fix bugs * support pro model: added by @fairydreaming * remove redundant V cache * Chat template * remove debugging leftovers * Add mechanism for inlining templates based on architecture * s/deepseek-v4-flash/deepseek4/g * s/deepseek-v4-flash/deepseek4/g continued * enable graph reuse * enable FA * fix test llama archs * rename * compatibility with antirez ds4 GGUFs * simplified set_gguf_parameters() by calling super class method, replaced moe.score_func with expert_gating_func. * reserve worst-case kv-cache * revert max split inputs * address review comments * add padding to enable FA * pad only the final value of plan.n_kv to 256 * remove built-in cpp chat template * cont: remove cpp built-in template * rm outdated test * replace ggml_view_3d() with ggml_reshape_3d() Co-authored-by: Georgi Gerganov <[email protected]> * only support n_seq=1 for now * remove unused var * cont: remove unused var * use scale bias * use correct ptr for can_reuse * remove gen-chat-inline-templates.py * simplify graph reuse * cont: cleanup * remove unused inputs * enable partial checkpointing * add correct shape for kq_mask + set llama_model_n_swa to 0 for dsv4 * precompute source_idx + add comment about dummy write * support multi-seq * remove restored_trim_pos * use split_equal when possible * fix indent * address review comments * use LLM_KV * fix ci --------- Co-authored-by: Piotr Wilkin <[email protected]> Co-authored-by: Stanisław Szymczyk <[email protected]> Co-authored-by: Xuan Son Nguyen <[email protected]> Co-authored-by: fairydreaming <[email protected]> Co-authored-by: Georgi Gerganov <[email protected]>	2026-06-29 16:58:51 +08:00
Sigbjørn Skjæret	f4043fec01	convert : more consistent handling of rope_parameters (#24833)	2026-06-20 13:42:36 +03:00
Michael WandandSigbjørn Skjæret	4988f6e866	Add arch support for cohere2-MoE (#24260) ... * Add arch support for cohere2-MoE * Removed redundant gating_func checks * Changed ffn lookup to prefer prefix_dense_intermediate_size * Renamed arch to cohere2moe * Removed redundant lmhead check and chat template changes * Removed lm_head.weight check from modify tensors, load output tensor not required, fallback to token_embd.weight * Changed to (routed+shared)*0.5 for shared expert combined avg * fixed sliding_window_pattern issue and pattern * Fixed transformers crash 'first_k_dense_replace' error * Remove comment * Removed cohere2-moe as a tokenizer type and kept as tiny_aya. Renamed North-Mini-Code-1.0. * Fixed MTP fail, changed to use iSWA * Fixed remaining todos: cohere2moe renamed, changed swa parsing to use get_key_or_arr, removed extra get_arr use * Force metadata usage Co-authored-by: Sigbjørn Skjæret <[email protected]> * Remove Cohere2 checkpoint comment Co-authored-by: Sigbjørn Skjæret <[email protected]> * Remove MTP comment Co-authored-by: Sigbjørn Skjæret <[email protected]> * Regenerate cohere2moe tokenizer hash * Add cohere2moe to Llama Model Saver supported list * Check for zerobios tensors and add support for Command to use LayerNorm * Map expert_selection_fn to sigmoid in base.py instead of command.py * use bools for foundnorm/foundnormrms Co-authored-by: Sigbjørn Skjæret <[email protected]> --------- Co-authored-by: Sigbjørn Skjæret <[email protected]>	2026-06-13 19:49:00 +02:00
5 people	88a39274ec	spec: add EAGLE3 speculative decoding support (#18039) ... * llama : enable layer input extraction * spec: support eagle3 * eagle3: fix params bug * eagle3: support Gemma4 eagle3 from RedHatAI * eagle3: set sync when get features from target Co-authored-by: tnhnyzc <[email protected]> * eagle3 : fix ubatch handling in embd_layer_inp extraction and encoder Co-authored-by: Doğaç Eldenk <[email protected]> * eagle3: adapt to upstream changes * eagle3: fix rebase issues and adapt to upstream changes * eagle3:exclude the eagle3 arch from test-llama-archs * eagle3: fix editorconfig check failures * eagle3: fix multi-seq issue in d2t vocab mapping * cont : minor style / clean-up * spec : remove `common_speculative_setup_draft_model()` * llama : clean-up unused API * eagle3: set d2t vocab mapping in decode graph * cont : assert layer inputs are configured * hparams : use n_embd_inp instead of n_embd_target_features * eagle3: make output.weight optional and inherit from target model when needed * haparams : generic norm-before-residual param * llama-ext : consistent names * cont : fix * hparams : remove target_hidden_size * cparams : rename output_layer_inp -> embeddings_layer_inp * arch : reuse ATTN_NORM_2 instead of adding new hidden norm * llama : clean-up names * cont : add assert + comment * Update conversion/llama.py Co-authored-by: Sigbjørn Skjæret <[email protected]> --------- Co-authored-by: Georgi Gerganov <[email protected]> Co-authored-by: tnhnyzc <[email protected]> Co-authored-by: Doğaç Eldenk <[email protected]> Co-authored-by: Sigbjørn Skjæret <[email protected]>	2026-06-12 10:21:06 +03:00
Mikhail PodvitskiiandSigbjørn Skjæret	4fb16eccce	model: add Mellum architecture (#23966) ... * model: support for Mellum architecture * model: improve mellum.py formatting * model: improve mellum.py formatting once again * deps: downgrade transformers to 4.57.6 (to fix CI) * deps: remove huggingface_hub dependency * deps: remove huggingface_hub from test requirements --------- Co-authored-by: Sigbjørn Skjæret <[email protected]>	2026-06-02 22:11:12 +03:00
Hans Florian	bfb4308b05	model : support granite multilingual embeddings R2 (ibm-granite/granite-embedding-{97,311}m-multilingual-r2) (#22716) ... * Add support for the ibm-granite/granite-embedding-{97m,311m}-multilingual-r2 embedding models: * Added a version of the gpt4o tokenizer that has a fixed regex (better handling of marks), and different token merging setting for the 97m model * Reused gemma4 tokenizer for the 311m model * granite-embedding-*-multilingual-r2 : add support SwiGLU FFN for Granite Embedding Multilingual R2 * added new GGUF key <arch>.hidden_activation (LLM_KV_HIDDEN_ACT) + writer * added a forward declaration of llm_ffn_op_type to llama-hparams.h * added llm_ffn_op in hparams * added LLM_FFN_NONE = 0 sentinel to llm_ffn_op_type (value-initialization), modern-bert: explicitly assigns LLM_FFN_GEGLU before reading GGUF (unchanged). * centralized hidden_act mapping in llama-model.cpp, added llm_ffn_op_type_from_string() helper, mirroring rope_scaling_type/llama_rope_scaling_type_from_string() * modern-bert reads the GGUF key (when present) and uses the resulting op in its FFN graph * Added granite-embedding-{97m,311m}-multilingual-r2 to the converter code * Added the hashes for the granite embedding multilingual R2 models * Set the hidden_activation in the GGUF if the field is present in config.json (such as for the granite embedding models)	2026-06-02 17:55:11 +02:00
forforever73andSigbjørn Skjæret	f7a0777a5c	convert : support Step3.7-Flash (#23845) ... * feat: support step3.7 * fix: register Step-3.7 BPE pre-tokenizer hash * delete fromjson * register step3.7 arch to Step35Model * drop vit projector in base filter * Apply suggestion from @CISC Co-authored-by: Sigbjørn Skjæret <[email protected]> * restore blank line --------- Co-authored-by: Sigbjørn Skjæret <[email protected]>	2026-06-02 09:54:49 +02:00
Junwon HwangandLG-AI-EXAONE	48b88c3b00	model: Add EXAONE 4.5 implementations (#21733) ... * Add EXAONE 4.5 and Add GQA for MMproj * mtmd: EXAONE 4.5 vision markers and projector path EXAONE 4.5 uses <vision> and </vision> for image boundaries; Qwen keeps <|vision_start|> and <|vision_end|>. Route EXAONE 4.5 through the Qwen2.5-VL-style encode path (window attention pattern, optional mmproj input norm). Update exaone4_5 projector weights and convert_hf_to_gguf for mmproj export. * mtmd: load EXAONE4 nextn tensors correctly Align EXAONE4 tensor registration with EXAONE_MOE for NextN/MTP slots and avoid skip-flag propagation on duplicated rope_freqs so model loading succeeds for EXAONE 4.5 GGUF. * Minor fixes * Address PR feedback * Address PR feedback * Fix EXAONE after merge * Fix EXAONE 4.5 conversion * Address PR feedback * Refactor EXAONE 4.5 conversion * Address PR feedback * Fix unintended deletion * Minor fix --------- Co-authored-by: LG-AI-EXAONE <[email protected]>	2026-06-01 11:48:53 +02:00
o7siandSigbjørn Skjæret	d4c8e2c29c	vocab : add tokenizer support for jina-embeddings-v2-base-zh (#18756) ... * vocab : add jina-embeddings-v2-base-zh (whitespace tokenizer) * lowercase defaults to true * type fix --------- Co-authored-by: Sigbjørn Skjæret <[email protected]>	2026-05-31 12:37:35 +02:00
Tarek Dakhran	2084434e66	vocab : support tokenizer for LFM2.5-8B-A1B (#23826) ... * vocab: Support tokenizer for LFM2.5-8B-A1B * Keep liquid6 tokenizer in models	2026-05-29 20:25:43 +02:00
Saba FallahandXuan-Son Nguyen	da3f990a47	mtmd: Add DeepSeekOCR 2 Support (#20975) ... * mtmd: DeepSeek-OCR 2 support, with multi-tile dynamic resolution * introduced clip_image_f32::add_viewsep * address PR review - drop redundant ggml_cpy ops in both deepseekocr versions build - drop no-op ggml_cont in build_sam - assert num_image_tokens deepseekocr2 - view_seperator as (1, n_embd) at conversion (for both versions) - drop redundant ggml_reshape_2d * Update tools/mtmd/models/deepseekocr2.cpp Co-authored-by: Xuan-Son Nguyen <[email protected]> --------- Co-authored-by: Xuan-Son Nguyen <[email protected]>	2026-05-29 16:13:51 +02:00
4 people	1f0aa2a696	model : support for DeepseekV32ForCausalLM with generic DeepSeek Sparse Attention (DSA) implementation (#23346) ... * llama : support DeepSeek V3.2 model family (with DSA lightning indexer) * convert : handle DeepseekV32ForCausalLM architecture * ggml : support for f16 GGML_OP_FILL * memory : separate hparams argument in llama_kv_cache constructor * memory : add llama_kv_cache_dsa memory (KV cache + lightning indexer cache) * llama : support for LLM_ARCH_DEEPSEEK32 * model : llama_model_deepseek32 implementation * model : merge two scale operations into one in DSA lightning indexer implementation * chore : remove unused code * model : support NVFP4 in DeepSeek V3.2 Co-authored-by: Sigbjørn Skjæret <[email protected]> * memory : refactoring TODO Co-authored-by: ggerganov <[email protected]> --------- Co-authored-by: Stanisław Szymczyk <[email protected]> Co-authored-by: Sigbjørn Skjæret <[email protected]> Co-authored-by: ggerganov <[email protected]>	2026-05-29 10:15:17 +02:00
ynankani	c5229087a5	convert : add FP8 to Q8 conversion (#23250) ... Signed-off-by: ynankani <[email protected]>	2026-05-28 10:16:17 +03:00
zhangtao2-1andzhangtao	9777256c31	convert: add MiniCPM5 tokenizer support (#23384) ... Add minicpm5 pre-tokenizer hash via convert_hf_to_gguf_update.py and implement hardcoded regex handling in llama-vocab.cpp, consistent with other BPE pre-tokenizers. Co-authored-by: zhangtao <[email protected]>	2026-05-27 08:08:33 +03:00
Niklas Sheth	c9d98295a3	model : add support for talkie-1930-13b (#22596) ... * initial talkie support, coherent * reorder to follow convention * absorb inverse rope * stop folding scalars to improve quantization * use broadcasting instead of duplication * style cleanup * add scaling support to LoraTorchTensor; use that path in conversion * use layer_out_scale instead of embd_skip_scale	2026-05-26 07:57:38 +03:00
Michael WandandSigbjørn Skjæret	a4d2d4ae41	convert : add compressed-tensors NVFP4 support (#21095) ... * Refactored Compressed Tensors NVFP4 support for new base.py * Support compressed-tensors NVFP4 conversion * Moved Qwen MTP remap into filter_tensors * simplify * pathlib no longer used --------- Co-authored-by: Sigbjørn Skjæret <[email protected]>	2026-05-25 14:16:11 +02:00
Kashif RasulandSigbjørn Skjæret	afcda09d15	vocab : fix HybridDNA tokenizer (#23466) ... * vocab : mark hybriddna k-mers to avoid BPE token collisions * improved loop --------- Co-authored-by: Sigbjørn Skjæret <[email protected]>	2026-05-22 11:17:31 +02:00
Kashif RasulandSigbjørn Skjæret	7ea23ddf7b	vocab : add Carbon-3B (HybridDNATokenizer) support (#23410) ... * vocab : add Carbon-3B (HybridDNATokenizer) support Adds a new BPE pre-type LLAMA_VOCAB_PRE_TYPE_CARBON for the HybridDNATokenizer used by HuggingFaceBio/Carbon-{500M,3B,8B}. The base BPE is Qwen3-4B-Base's; what differs is that text inside <dna>...</dna> regions is chunked into fixed 6-mers (right-padded with 'A' on the trailing partial), and any base outside ACGT maps to <oov>. * src/llama-vocab.{h,cpp}: new pre-type, dispatched from llm_tokenizer_bpe_session::tokenize. * src/llama-vocab-carbon.h: pure helpers (tokenize_carbon, emit_dna_kmers) factored out for unit testing — no llama_vocab dependency, vocab access goes through a std::function. * conversion/base.py: detect HybridDNATokenizer by class name in get_vocab_base_pre (chktxt collides with Qwen3 base since it has no <dna>), and pass trust_remote_code=True in get_vocab_base so the custom tokenizer class can load. * tests/test-tokenizer-carbon.cpp: 12 cases covering single 6-mer, multi 6-mer, lowercase, invalid base -> <oov>, partial k-mer right-pad, mixed text+DNA, empty <dna></dna>, unterminated <dna>, two regions, vocab miss. * vocab : align Carbon-3B changes with llama.cpp conventions * Fold tokenize_carbon + emit_dna_kmers inline into llm_tokenizer_bpe_session (drop src/llama-vocab-carbon.h), matching how every other tokenizer keeps its helpers inside llama-vocab.cpp. * Replace the standalone unit test with the conventional test-tokenizer-0 row backed by models/ggml-vocab-carbon.gguf (vocab-only conversion) + .inp/.out fixtures covering single 6-mer, multi 6-mer, lowercase, invalid base -> <oov>, partial right-pad, mixed text+DNA, empty <dna></dna>, unterminated <dna>, two regions. * Register "carbon" in convert_hf_to_gguf_update.py's model list (pointing at HuggingFaceBio/Carbon-3B) and teach both AutoTokenizer call sites in the updater to pass trust_remote_code=True for it, matching how t5 is special-cased. * vocab : move Carbon dispatch to _set_vocab_carbon + LlamaModel branch Refactor the conversion-side changes to follow the per-tokenizer-family convention used by _set_vocab_qwen, _set_vocab_interns1, _set_vocab_glm, etc. instead of conditionalising the shared get_vocab_base / get_vocab_base_pre paths. * conversion/base.py: add _set_vocab_carbon — self-contained, loads with trust_remote_code=True so HybridDNATokenizer's merged Qwen3 + DNA vocab is visible, writes tokenizer.ggml.pre = "carbon" directly. * conversion/llama.py: branch in LlamaModel.set_vocab on tokenizer_config.json["tokenizer_class"] == "HybridDNATokenizer" and dispatch to _set_vocab_carbon. Same precedent as conversion/bert.py (tokenizer_class branch between BertTokenizer / RobertaTokenizer) and conversion/phi.py. * conversion/base.py: revert the conditional in get_vocab_base and the class-name short-circuit in the auto-generated get_vocab_base_pre. * tests : expand ggml-vocab-carbon.gguf fixtures with model-card examples Add 6 cases from the Carbon-3B model card on top of the existing edge coverage: the unterminated basic-completion prompt, the closed 33-bp example, the metadata-conditioned prompt (with <vertebrate_mammalian> and <protein_coding_region> which BPE-decompose since they are not in the vocab), the documented anti-pattern of raw DNA without <dna> tags, and the two likelihood-scoring examples. Brings the suite to 19 cases. * vocab : promote HybridDNATokenizer to its own LLAMA_VOCAB_TYPE Refactor per upstream review: > This should be its own tokenizer model, ie. carbonhybriddna instead > of gpt2 and not carbon pre-tokenizer. That way you can keep the > correct pre-tokenizer, in case that ever changes. Previously the tokenizer was modelled as LLAMA_VOCAB_TYPE_BPE plus a new LLAMA_VOCAB_PRE_TYPE_CARBON, which (a) put a CARBON-specific branch inside llm_tokenizer_bpe_session::tokenize (only existing pre-types differ in regex, not dispatch logic), and (b) conflated "hybrid DNA tokenization" with "Qwen3 BPE pre-tokenizer". This change moves it to its own vocab type, peer to PLAMO2, with the GGUF model name matching the HF tokenizer class (HybridDNATokenizer): * include/llama.h: new LLAMA_VOCAB_TYPE_HYBRIDDNA = 7. * src/llama-vocab.cpp: new llm_tokenizer_hybriddna + session that owns std::unique_ptr<llm_tokenizer_bpe> for non-<dna> text and routes raw text through a DNA-aware splitter; wired into init_tokenizer, tokenize, type_name, byte_to_token, and the BPE-style token_to_piece case (DNA k-mers + <dna>/</dna>/<oov> are pure ASCII, so byte-level BPE decoding handles them). LLAMA_VOCAB_TYPE_HYBRIDDNA gets its own branch in the vocab-type config block alongside SPM/WPM/UGM/RWKV, where pre_type is set to QWEN2 and the matching add_space_prefix / escape_whitespaces / clean_spaces flags are applied — mirroring qwen2's BPE path so byte-level BPE merging stays bit-identical to the Python reference for non-DNA text. * src/llama-vocab.h: drop the short-lived LLAMA_VOCAB_PRE_TYPE_CARBON. * conversion/base.py: _set_vocab_hybriddna writes tokenizer.ggml.model = "hybriddna" (no separate pre). * conversion/llama.py: dispatch on tokenizer_class == "HybridDNATokenizer" same as bert.py / phi.py do. * models/ggml-vocab-hybriddna.gguf{,.inp,.out}: renamed fixture + regenerated metadata. * convert_hf_to_gguf_update.py: drop the stale chkhsh entry and trust_remote_code special-case (no longer needed since dispatch is now class-name driven, not chkhsh). Verified end-to-end against HuggingFaceBio/Carbon-{500M,3B,8B}: tokenization is bit-identical to the Python HybridDNATokenizer for all 19 test fixtures plus the model-card metadata-conditioned prompt; greedy completion produces the same DNA continuation as the Python reference; spec-dec with 500M as draft for 8B still works. * vocab : relax llm_tokenizer_bpe assert to allow HYBRIDDNA * vocab : drop llm_tokenizer_bpe vocab-type assert * vocab : write tokenizer.ggml.pre for HYBRIDDNA, share BPE dispatch * vocab : assert BPE or HYBRIDDNA in llm_tokenizer_bpe * vocab : annotate #endif with PRETOKENIZERDEBUG * vocab : drop local hybriddna fixture (moves to ggml-org/vocabs) * deduplicate * simplify * simplify --------- Co-authored-by: Sigbjørn Skjæret <[email protected]>	2026-05-21 08:34:32 +02:00
Aman GuptaandGeorgi Gerganov	255582687b	llama + spec: MTP Support (#22673) ... * spec: support MTP * fix batch size * rename files * cont : simplify (#7) * MTP: clean-up (#9) * MTP: clean-up * review: use llama_context_type instead of llama_graph_type * review: remove llama_model_has_mtp * review: fix convert issues * convert: fix pycheck * review: formatting * use `mtp-` for identifying mtp models * convert: fix mtp conversion * mtp -> draft-mtp * remove unused llama_arch * add need_embd in speculative * llama: allow partial seq_rm for GDN models for speculative decoding Currently speculative checkpoint needs to restart from a checkpoint after some draft tokens are not accepted, this leads to some wastage in running the target again. This PR adds the ability to rollback upto `draft_max` by storing the GDN intermediates. * fix pending state * vulkan: add GDN partial rollback * meta: extend check to axis 1 * metal: add GDN partial rollback Extend the gated delta net kernel to store intermediate states for partial rollback support on the Metal backend. - Add K (snapshot slot count) as a function constant - Read input state from slot 0 of the 3D state tensor - Write intermediate states to different slots during token loop - For K=1, maintain backward-compatible single-slot behavior Ref: https://github.com/ggml-org/llama.cpp/commit/8c05923630110223669f069af2000e9cf10c02bc Assisted-by: llama.cpp:local pi * delta_net_base: use ggml_pad instead of new_tensor * review: add need_rs_seq * review: rename part_bounded to n_rs * review: deslop comments * review: rename, add asserts * server : adjust checkpoint logic (#11) * server : adjust checkpoint logic * cont : rm asserts * server-context: fix early exit * spec : fix compatibility with n-gram and add TODOs (#13) * metal : cleanup * llama : fix faulty bitwise check in recurrent memory * server : disable RS-based MTP in combination with other spec types * spec : add TODOs * cont : fix comment * cont : update comment * common : fix logic for ngram + mtp compat * llama-memory: enable checkpointing with partial rollback * cont: add test-case for loading into a dirty ctx * llama-memory-recurrent: clear rs_idx in clear * download: fix mtp path * llama-arch: fix enorm op * docs: update docs * conversion: fix type annotations --------- Co-authored-by: Georgi Gerganov <[email protected]>	2026-05-16 20:06:23 +08:00
Piotr Wilkin (ilintar)andSigbjørn Skjæret	cc7200bf12	Refactor: convert_hf_to_gguf.py (#17114) ... * move conversion code to a dedicated conversion directory and split the files akin to the src/models architecture --------- Co-authored-by: Sigbjørn Skjæret <[email protected]>	2026-05-15 15:18:12 +02:00