Rescale the TX filter for M17.

YSF pictures can go through modem

.gitmodules

@@ -4,3 +4,6 @@
 [submodule "STM32F7XX_Lib"]
 	path = STM32F7XX_Lib
 	url = https://github.com/juribeparada/STM32F7XX_Lib.git
+[submodule "STM32F10X_Lib"]
+	path = STM32F10X_Lib
+	url = https://github.com/shawnchain/STM32F10X_Lib.git

CWIdTX.cpp

@@ -77,6 +77,7 @@ const struct {
   {',', 0xEEAEE000U, 22U},
   {'-', 0xEAAE0000U, 18U},
   {'=', 0xEAB80000U, 16U},
+  {'.', 0xBAEB8000U, 20U},
   {' ', 0x00000000U, 4U},
   {0U,  0x00000000U, 0U}
 };
@@ -170,4 +171,3 @@ void CCWIdTX::reset()
   m_poPtr = 0U;
   m_n     = 0U;
 }
-

CalFM.cpp

@@ -0,0 +1,127 @@
+/*
+ *   Copyright (C) 2009-2015 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2016 by Colin Durbridge G4EML
+ *   Copyright (C) 2020 by Phil Taylor M0VSE
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "Config.h"
+#include "Globals.h"
+#include "CalFM.h"
+
+
+const struct TONE_TABLE {
+  uint16_t  frequency;
+  uint16_t length;
+  q31_t    increment;
+} TONE_TABLE_DATA[] = {
+  {2495U, 10U, 223248821},
+  {2079U, 12U, 186025772},
+  {1633U, 15U, 146118367},
+  {1247U, 19U, 111579672},
+  {1039U, 23U, 93012886},
+  {956U,  25U, 85541432}};
+
+const uint8_t TONE_TABLE_DATA_LEN = 6U;
+
+CCalFM::CCalFM() :
+m_frequency(0),
+m_length(0),
+m_tone(NULL),
+m_level(128 * 12),
+m_transmit(false),
+m_audioSeq(0),
+m_lastState(STATE_IDLE)
+{
+}
+
+void CCalFM::process()
+{
+  const TONE_TABLE* entry = NULL;
+
+  if (m_modemState!=m_lastState)
+  {
+    switch (m_modemState) {
+        case STATE_FMCAL10K:
+          m_frequency = 956U;
+          break;
+        case STATE_FMCAL12K:
+          m_frequency = 1039U;
+          break;
+        case STATE_FMCAL15K:
+          m_frequency = 1247U;
+          break;
+        case STATE_FMCAL20K:
+          m_frequency = 1633U;
+          break;
+        case STATE_FMCAL25K:
+          m_frequency = 2079U;
+          break;
+        case STATE_FMCAL30K:
+          m_frequency = 2495U;
+          break;
+        default:
+          m_frequency = 0U;
+          break;
+    }
+
+    for (uint8_t i = 0U; i < TONE_TABLE_DATA_LEN; i++) {
+      if (TONE_TABLE_DATA[i].frequency == m_frequency) {
+        entry = TONE_TABLE_DATA + i;
+        break;
+      }
+    }
+
+    if (entry == NULL)
+      return;
+
+    m_length = entry->length;
+
+    delete[] m_tone;
+    m_tone = new q15_t[m_length];
+
+    q31_t arg = 0;
+    for (uint16_t i = 0U; i < m_length; i++) {
+      q63_t value = ::arm_sin_q31(arg) * q63_t(m_level);
+      m_tone[i] = q15_t(__SSAT((value >> 31), 16));
+
+      arg += entry->increment;
+    }
+
+    m_lastState=m_modemState;
+  }
+
+  if (m_transmit)
+  {
+    uint16_t space = io.getSpace();
+    while (space > m_length)
+    {
+      io.write(m_modemState,m_tone,m_length);
+      space -= m_length;
+    }
+  }
+}
+
+
+uint8_t CCalFM::write(const uint8_t* data, uint8_t length)
+{
+  if (length != 1U)
+    return 4U;
+
+  m_transmit = data[0U] == 1U;
+
+  return 0U;
+}

CalFM.h

@@ -0,0 +1,51 @@
+/*
+ *   Copyright (C) 2009-2015 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2016 by Colin Durbridge G4EML
+ *   Copyright (C) 2020 by Phil Taylor M0VSE
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if !defined(CALFM_H)
+#define  CALFM_H
+
+#include "Config.h"
+
+class CCalFM {
+public:
+  CCalFM();
+
+  void process();
+  void fm10kcal();
+  void fm12k5cal();
+  void fm15kcal();
+  void fm20kcal();
+  void fm25kcal();
+  void fm30kcal();
+
+  uint8_t write(const uint8_t* data, uint8_t length);
+
+private:
+  uint16_t  m_frequency;
+  uint16_t  m_length;
+  q15_t*    m_tone;
+  q15_t     m_level;
+  bool      m_transmit;
+  uint8_t   m_audioSeq;
+  uint8_t   m_lastState;
+};
+
+#endif
+

Config.h

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2015,2016,2017,2018 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2015,2016,2017,2018,2020 by Jonathan Naylor G4KLX
  *
  *   This program is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by
@@ -35,20 +35,19 @@
 // For 19.2 MHz
 // #define EXTERNAL_OSC 19200000
 
-// Allow the use of the COS line to lockout the modem
-// #define USE_COS_AS_LOCKOUT
-
 // Use pins to output the current mode via LEDs
 // #define MODE_LEDS
 
 // For the original Arduino Due pin layout
 // #define ARDUINO_DUE_PAPA
 
+#if defined(STM32F1)
+// For the SQ6POG board
+#define STM32F1_POG
+#else
 // For the ZUM V1.0 and V1.0.1 boards pin layout
 #define ARDUINO_DUE_ZUM_V10
-
+#endif
-// For the SQ6POG board
-// #define STM32F1_POG
 
 // For the SP8NTH board
 // #define ARDUINO_DUE_NTH
@@ -79,8 +78,13 @@
 // Use the YSF and P25 LEDs for NXDN
 // #define USE_ALTERNATE_NXDN_LEDS
 
+// Use the D-Star and P25 LEDs for M17
+// #define USE_ALTERNATE_M17_LEDS
+
 // Use the D-Star and DMR LEDs for POCSAG
 // #define USE_ALTERNATE_POCSAG_LEDS
 
-#endif
+// Use the D-Star and YSF LEDs for FM
+#define USE_ALTERNATE_FM_LEDS
 
+#endif

FM.cpp

@@ -0,0 +1,523 @@
+/*
+ *   Copyright (C) 2020 by Jonathan Naylor G4KLX
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "Config.h"
+#include "Globals.h"
+#include "FM.h"
+
+/*
+ * Access Mode values are:
+ *   0 - Carrier access with COS
+ *   1 - CTCSS only access without COS
+ *   2 - CTCSS only access with COS
+ *   3 - CTCSS only access with COS to start, then carrier access with COS
+ */
+
+CFM::CFM() :
+m_callsign(),
+m_rfAck(),
+m_ctcssRX(),
+m_ctcssTX(),
+m_timeoutTone(),
+m_state(FS_LISTENING),
+m_callsignAtStart(false),
+m_callsignAtEnd(false),
+m_callsignAtLatch(false),
+m_callsignTimer(),
+m_timeoutTimer(),
+m_holdoffTimer(),
+m_kerchunkTimer(),
+m_ackMinTimer(),
+m_ackDelayTimer(),
+m_hangTimer(),
+m_reverseTimer(),
+m_filterStage1(  724,   1448,   724, 32768, -37895, 21352),//3rd order Cheby Filter 300 to 2700Hz, 0.2dB passband ripple, sampling rate 24kHz
+m_filterStage2(32768,      0,-32768, 32768, -50339, 19052),
+m_filterStage3(32768, -65536, 32768, 32768, -64075, 31460),
+m_blanking(),
+m_accessMode(1U),
+m_cosInvert(false),
+m_rfAudioBoost(1U),
+m_downsampler(128U),//Size might need adjustement
+m_rxLevel(1),
+m_inputRB(4800U),   // 200ms of audio
+m_outputRB(2400U)   // 100ms of audio
+{
+  m_reverseTimer.setTimeout(0U, 150U);
+
+  insertDelay(100U);
+}
+
+void CFM::samples(bool cos, const q15_t* samples, uint8_t length)
+{
+  if (m_cosInvert)
+    cos = !cos;
+
+  clock(length);
+
+  uint8_t i = 0U;
+  for (; i < length; i++) {
+    // ARMv7-M has hardware integer division 
+    q15_t currentSample = q15_t((q31_t(samples[i]) << 8) / m_rxLevel);
+
+    switch (m_accessMode) {
+      case 0U:
+        stateMachine(cos);
+        break;
+
+      case 1U: {
+          uint8_t ctcssState = m_ctcssRX.process(currentSample);
+
+          // Delay the audio by 100ms to better match the CTCSS detector output
+          m_inputRB.put(currentSample);
+          m_inputRB.get(currentSample);
+
+          if (CTCSS_NOT_READY(ctcssState) && m_modemState != STATE_FM) {
+            // Not enough samples to determine if you have CTCSS, just carry on
+          } else {
+            bool validCTCSS = CTCSS_VALID(ctcssState);
+            stateMachine(validCTCSS);
+          }
+        }
+        break;
+
+      case 2U: {
+          uint8_t ctcssState = m_ctcssRX.process(currentSample);
+          if (CTCSS_NOT_READY(ctcssState) && m_modemState != STATE_FM) {
+            // Not enough samples to determine if you have CTCSS, just carry on
+          } else {
+            bool validCTCSS = CTCSS_VALID(ctcssState);
+            stateMachine(validCTCSS && cos);
+          }
+        }
+        break;
+
+      default: {
+          uint8_t ctcssState = m_ctcssRX.process(currentSample);
+          if (CTCSS_NOT_READY(ctcssState) && m_modemState != STATE_FM) {
+            // Not enough samples to determine if you have CTCSS, just carry on
+          } else if (CTCSS_READY(ctcssState) && m_modemState != STATE_FM) {
+            // We had enough samples for CTCSS and we are in some other mode than FM
+            bool validCTCSS = CTCSS_VALID(ctcssState);
+            stateMachine(validCTCSS && cos);
+          } else {
+            stateMachine(cos);
+          }
+        }
+        break;
+    }
+
+    if (m_modemState != STATE_FM)
+      continue;
+
+    // Only let audio through when relaying audio
+    if (m_state == FS_RELAYING || m_state == FS_KERCHUNK) {  
+      // m_downsampler.addSample(currentSample);
+      currentSample = m_blanking.process(currentSample);
+      currentSample *= m_rfAudioBoost;
+    } else {
+      currentSample = 0;
+    }
+
+    if (!m_callsign.isRunning())
+      currentSample += m_rfAck.getHighAudio();
+    
+    if (!m_rfAck.isRunning()) {
+      if (m_state == FS_LISTENING)
+        currentSample += m_callsign.getHighAudio();
+      else
+        currentSample += m_callsign.getLowAudio();
+    }
+
+    currentSample = m_filterStage3.filter(m_filterStage2.filter(m_filterStage1.filter(currentSample)));
+
+    if (!m_callsign.isRunning() && !m_rfAck.isRunning())
+      currentSample += m_timeoutTone.getAudio();
+
+    currentSample += m_ctcssTX.getAudio(m_reverseTimer.isRunning());
+
+    m_outputRB.put(currentSample);
+  }
+}
+
+void CFM::process()
+{
+  q15_t sample;
+  while (io.getSpace() >= 3U && m_outputRB.get(sample))
+    io.write(STATE_FM, &sample, 1U);
+}
+
+void CFM::reset()
+{
+  m_state = FS_LISTENING;
+
+  m_callsignTimer.stop();
+  m_timeoutTimer.stop();
+  m_kerchunkTimer.stop();
+  m_ackMinTimer.stop();
+  m_ackDelayTimer.stop();
+  m_hangTimer.stop();
+  m_reverseTimer.stop();
+
+  m_ctcssRX.reset();
+  m_rfAck.stop();
+  m_callsign.stop();
+  m_timeoutTone.stop();
+
+  m_outputRB.reset();
+}
+
+uint8_t CFM::setCallsign(const char* callsign, uint8_t speed, uint16_t frequency, uint8_t time, uint8_t holdoff, uint8_t highLevel, uint8_t lowLevel, bool callsignAtStart, bool callsignAtEnd, bool callsignAtLatch)
+{
+  m_callsignAtStart = callsignAtStart;
+  m_callsignAtEnd   = callsignAtEnd;
+  m_callsignAtLatch = callsignAtLatch;
+
+  uint16_t holdoffTime  = holdoff * 60U;
+  uint16_t callsignTime = time * 60U;
+
+  m_holdoffTimer.setTimeout(holdoffTime, 0U);
+  m_callsignTimer.setTimeout(callsignTime, 0U);
+
+  if (holdoffTime > 0U)
+    m_holdoffTimer.start();
+
+  return m_callsign.setParams(callsign, speed, frequency, highLevel, lowLevel);
+}
+
+uint8_t CFM::setAck(const char* rfAck, uint8_t speed, uint16_t frequency, uint8_t minTime, uint16_t delay, uint8_t level)
+{
+  m_ackDelayTimer.setTimeout(0U, delay);
+
+  if (minTime > 0U)
+    m_ackMinTimer.setTimeout(minTime, delay);
+
+  return m_rfAck.setParams(rfAck, speed, frequency, level, level);
+}
+
+uint8_t CFM::setMisc(uint16_t timeout, uint8_t timeoutLevel, uint8_t ctcssFrequency, uint8_t ctcssHighThreshold, uint8_t ctcssLowThreshold, uint8_t ctcssLevel, uint8_t kerchunkTime, uint8_t hangTime, uint8_t accessMode, bool cosInvert, uint8_t rfAudioBoost, uint8_t maxDev, uint8_t rxLevel)
+{
+  m_accessMode = accessMode;
+  m_cosInvert  = cosInvert;
+
+  m_rfAudioBoost = q15_t(rfAudioBoost);
+
+  m_timeoutTimer.setTimeout(timeout, 0U);
+  m_kerchunkTimer.setTimeout(kerchunkTime, 0U);
+  m_hangTimer.setTimeout(hangTime, 0U);
+
+  m_timeoutTone.setParams(timeoutLevel);
+  m_blanking.setParams(maxDev, timeoutLevel);
+
+  m_rxLevel = rxLevel; //q15_t(255)/q15_t(rxLevel >> 1);
+
+  uint8_t ret = m_ctcssRX.setParams(ctcssFrequency, ctcssHighThreshold, ctcssLowThreshold);
+  if (ret != 0U)
+    return ret;
+
+  return m_ctcssTX.setParams(ctcssFrequency, ctcssLevel);
+}
+
+void CFM::stateMachine(bool validSignal)
+{
+  switch (m_state) {
+    case FS_LISTENING:
+      listeningState(validSignal);
+      break;
+    case FS_KERCHUNK:
+      kerchunkState(validSignal);
+      break;
+    case FS_RELAYING:
+      relayingState(validSignal);
+      break;
+    case FS_RELAYING_WAIT:
+      relayingWaitState(validSignal);
+      break;
+    case FS_TIMEOUT:
+      timeoutState(validSignal);
+      break;
+    case FS_TIMEOUT_WAIT:
+      timeoutWaitState(validSignal);
+      break;
+    case FS_HANG:
+      hangState(validSignal);
+      break;
+    default:
+      break;
+  }
+
+  if (m_state == FS_LISTENING && m_modemState == STATE_FM) {
+    if (!m_callsign.isWanted() && !m_rfAck.isWanted() && !m_reverseTimer.isRunning())
+      m_reverseTimer.start();
+
+    if (!m_callsign.isWanted() && !m_rfAck.isWanted() && m_reverseTimer.isRunning() && m_reverseTimer.hasExpired()) {
+      DEBUG1("Change to STATE_IDLE");
+      m_modemState = STATE_IDLE;
+      m_callsignTimer.stop();
+      m_timeoutTimer.stop();
+      m_kerchunkTimer.stop();
+      m_ackMinTimer.stop();
+      m_ackDelayTimer.stop();
+      m_hangTimer.stop();
+      m_reverseTimer.stop();
+    }
+  }
+}
+
+void CFM::clock(uint8_t length)
+{
+  m_callsignTimer.clock(length);
+  m_timeoutTimer.clock(length);
+  m_holdoffTimer.clock(length);
+  m_kerchunkTimer.clock(length);
+  m_ackMinTimer.clock(length);
+  m_ackDelayTimer.clock(length);
+  m_hangTimer.clock(length);
+  m_reverseTimer.clock(length);
+}
+
+void CFM::listeningState(bool validSignal)
+{
+  if (validSignal) {
+    if (m_kerchunkTimer.getTimeout() > 0U) {
+      DEBUG1("State to KERCHUNK");
+      m_state = FS_KERCHUNK;
+      m_kerchunkTimer.start();
+      if (m_callsignAtStart && !m_callsignAtLatch)
+        sendCallsign();
+    } else {
+      DEBUG1("State to RELAYING");
+      m_state = FS_RELAYING;
+      if (m_callsignAtStart)
+        sendCallsign();
+    }
+
+    insertSilence(50U);
+
+    beginRelaying();
+
+    m_callsignTimer.start();
+    m_reverseTimer.stop();
+
+    io.setDecode(true);
+    io.setADCDetection(true);
+
+    DEBUG1("Change to STATE_FM");
+    m_modemState = STATE_FM;
+  }
+}
+
+void CFM::kerchunkState(bool validSignal)
+{
+  if (validSignal) {
+    if (m_kerchunkTimer.hasExpired()) {
+      DEBUG1("State to RELAYING");
+      m_state = FS_RELAYING;
+      m_kerchunkTimer.stop();
+      if (m_callsignAtStart && m_callsignAtLatch) {
+        sendCallsign();
+        m_callsignTimer.start();
+      }
+    }
+  } else {
+    io.setDecode(false);
+    io.setADCDetection(false);
+
+    DEBUG1("State to LISTENING");
+    m_state = FS_LISTENING;
+    m_kerchunkTimer.stop();
+    m_timeoutTimer.stop();
+    m_ackMinTimer.stop();
+    m_callsignTimer.stop();
+  }
+}
+
+void CFM::relayingState(bool validSignal)
+{
+  if (validSignal) {
+    if (m_timeoutTimer.isRunning() && m_timeoutTimer.hasExpired()) {
+      DEBUG1("State to TIMEOUT");
+      m_state = FS_TIMEOUT;
+      m_ackMinTimer.stop();
+      m_timeoutTimer.stop();
+      m_timeoutTone.start();
+    }
+  } else {
+    io.setDecode(false);
+    io.setADCDetection(false);
+
+    DEBUG1("State to RELAYING_WAIT");
+    m_state = FS_RELAYING_WAIT;
+    m_ackDelayTimer.start();
+  }
+
+  if (m_callsignTimer.isRunning() && m_callsignTimer.hasExpired()) {
+    sendCallsign();
+    m_callsignTimer.start();
+  }
+}
+
+void CFM::relayingWaitState(bool validSignal)
+{
+  if (validSignal) {
+    io.setDecode(true);
+    io.setADCDetection(true);
+
+    DEBUG1("State to RELAYING");
+    m_state = FS_RELAYING;
+    m_ackDelayTimer.stop();
+  } else {
+    if (m_ackDelayTimer.isRunning() && m_ackDelayTimer.hasExpired()) {
+      DEBUG1("State to HANG");
+      m_state = FS_HANG;
+
+      if (m_ackMinTimer.isRunning()) {
+        if (m_ackMinTimer.hasExpired()) {
+          DEBUG1("Send ack");
+          m_rfAck.start();
+          m_ackMinTimer.stop();
+        }
+      } else {
+          DEBUG1("Send ack");
+          m_rfAck.start();
+          m_ackMinTimer.stop();
+      }
+
+      m_ackDelayTimer.stop();
+      m_timeoutTimer.stop();
+      m_hangTimer.start();
+    }
+  }
+
+  if (m_callsignTimer.isRunning() && m_callsignTimer.hasExpired()) {
+    sendCallsign();
+    m_callsignTimer.start();
+  }
+}
+
+void CFM::hangState(bool validSignal)
+{
+  if (validSignal) {
+    io.setDecode(true);
+    io.setADCDetection(true);
+
+    DEBUG1("State to RELAYING");
+    m_state = FS_RELAYING;
+    DEBUG1("Stop ack");
+    m_rfAck.stop();
+    beginRelaying();
+  } else {
+    if (m_hangTimer.isRunning() && m_hangTimer.hasExpired()) {
+      DEBUG1("State to LISTENING");
+      m_state = FS_LISTENING;
+      m_hangTimer.stop();
+
+      if (m_callsignAtEnd)
+        sendCallsign();
+
+      m_callsignTimer.stop();
+    }
+  }
+
+  if (m_callsignTimer.isRunning() && m_callsignTimer.hasExpired()) {
+    sendCallsign();
+    m_callsignTimer.start();
+  }
+}
+
+void CFM::timeoutState(bool validSignal)
+{
+  if (!validSignal) {
+    io.setDecode(false);
+    io.setADCDetection(false);
+
+    DEBUG1("State to TIMEOUT_WAIT");
+    m_state = FS_TIMEOUT_WAIT;
+    m_ackDelayTimer.start();
+  }
+
+  if (m_callsignTimer.isRunning() && m_callsignTimer.hasExpired()) {
+    sendCallsign();
+    m_callsignTimer.start();
+  }
+}
+
+void CFM::timeoutWaitState(bool validSignal)
+{
+  if (validSignal) {
+    io.setDecode(true);
+    io.setADCDetection(true);
+
+    DEBUG1("State to TIMEOUT");
+    m_state = FS_TIMEOUT;
+    m_ackDelayTimer.stop();
+  } else {
+    if (m_ackDelayTimer.isRunning() && m_ackDelayTimer.hasExpired()) {
+      DEBUG1("State to HANG");
+      m_state = FS_HANG;
+      m_timeoutTone.stop();
+      DEBUG1("Send ack");
+      m_rfAck.start();
+      m_ackDelayTimer.stop();
+      m_ackMinTimer.stop();
+      m_timeoutTimer.stop();
+      m_hangTimer.start();
+    }
+  }
+
+  if (m_callsignTimer.isRunning() && m_callsignTimer.hasExpired()) {
+    sendCallsign();
+    m_callsignTimer.start();
+  }
+}
+
+void CFM::sendCallsign()
+{
+  if (m_holdoffTimer.isRunning()) {
+    if (m_holdoffTimer.hasExpired()) {
+      DEBUG1("Send callsign");
+      m_callsign.start();
+      m_holdoffTimer.start();
+    }
+  } else {
+    DEBUG1("Send callsign");
+    m_callsign.start();
+  }
+}
+
+void CFM::beginRelaying()
+{
+  m_timeoutTimer.start();
+  m_ackMinTimer.start();
+}
+
+void CFM::insertDelay(uint16_t ms)
+{
+  uint32_t nSamples = ms * 24U;
+
+  for (uint32_t i = 0U; i < nSamples; i++)
+    m_inputRB.put(0);
+}
+
+void CFM::insertSilence(uint16_t ms)
+{
+  uint32_t nSamples = ms * 24U;
+
+  for (uint32_t i = 0U; i < nSamples; i++)
+    m_outputRB.put(0);
+}

FM.h

@@ -0,0 +1,109 @@
+/*
+ *   Copyright (C) 2020 by Jonathan Naylor G4KLX
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if !defined(FM_H)
+#define  FM_H
+
+#include "Config.h"
+
+#include "FMBlanking.h"
+#include "FMCTCSSRX.h"
+#include "FMCTCSSTX.h"
+#include "FMTimeout.h"
+#include "FMKeyer.h"
+#include "FMTimer.h"
+#include "FMRB.h"
+#include "FMDirectForm1.h"
+#include "FMDownsampler.h"
+
+enum FM_STATE {
+  FS_LISTENING,
+  FS_KERCHUNK,
+  FS_RELAYING,
+  FS_RELAYING_WAIT,
+  FS_TIMEOUT,
+  FS_TIMEOUT_WAIT,
+  FS_HANG
+};
+
+
+
+
+class CFM {
+public:
+  CFM();
+
+  void samples(bool cos, const q15_t* samples, uint8_t length);
+
+  void process();
+
+  void reset();
+
+  uint8_t setCallsign(const char* callsign, uint8_t speed, uint16_t frequency, uint8_t time, uint8_t holdoff, uint8_t highLevel, uint8_t lowLevel, bool callsignAtStart, bool callsignAtEnd, bool callsignAtLatch);
+  uint8_t setAck(const char* rfAck, uint8_t speed, uint16_t frequency, uint8_t minTime, uint16_t delay, uint8_t level);
+  uint8_t setMisc(uint16_t timeout, uint8_t timeoutLevel, uint8_t ctcssFrequency, uint8_t ctcssHighThreshold, uint8_t ctcssLowThreshold, uint8_t ctcssLevel, uint8_t kerchunkTime, uint8_t hangTime, uint8_t accessMode, bool cosInvert, uint8_t rfAudioBoost, uint8_t maxDev, uint8_t rxLevel);
+
+private:
+  CFMKeyer             m_callsign;
+  CFMKeyer             m_rfAck;
+  CFMCTCSSRX           m_ctcssRX;
+  CFMCTCSSTX           m_ctcssTX;
+  CFMTimeout           m_timeoutTone;
+  FM_STATE             m_state;
+  bool                 m_callsignAtStart;
+  bool                 m_callsignAtEnd;
+  bool                 m_callsignAtLatch;
+  CFMTimer             m_callsignTimer;
+  CFMTimer             m_timeoutTimer;
+  CFMTimer             m_holdoffTimer;
+  CFMTimer             m_kerchunkTimer;
+  CFMTimer             m_ackMinTimer;
+  CFMTimer             m_ackDelayTimer;
+  CFMTimer             m_hangTimer;
+  CFMTimer             m_reverseTimer;
+  CFMDirectFormI       m_filterStage1;
+  CFMDirectFormI       m_filterStage2;
+  CFMDirectFormI       m_filterStage3;
+  CFMBlanking          m_blanking;
+  uint8_t              m_accessMode;
+  bool                 m_cosInvert;
+  q15_t                m_rfAudioBoost;
+  CFMDownsampler       m_downsampler;
+  q15_t                m_rxLevel;
+  CFMRB                m_inputRB;
+  CFMRB                m_outputRB;
+
+  void stateMachine(bool validSignal);
+  void listeningState(bool validSignal);
+  void kerchunkState(bool validSignal);
+  void relayingState(bool validSignal);
+  void relayingWaitState(bool validSignal);
+  void timeoutState(bool validSignal);
+  void timeoutWaitState(bool validSignal);
+  void hangState(bool validSignal);
+
+  void clock(uint8_t length);
+
+  void sendCallsign();
+  void beginRelaying();
+
+  void insertDelay(uint16_t ms);
+  void insertSilence(uint16_t ms);
+};
+
+#endif

FMBlanking.cpp

@@ -0,0 +1,82 @@
+/*
+ *   Copyright (C) 2020 by Jonathan Naylor G4KLX
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "Config.h"
+#include "Globals.h"
+#include "FMBlanking.h"
+
+// 2000 Hz sine wave at 24000 Hz sample rate
+const q31_t TONE[] = {0, 16384, 28378, 32767, 28378, 16384, 0, -16383, -28377, -32767, -28377, -16383};
+
+const uint8_t TONE_LEN = 12U;
+
+const uint32_t BLEEP_LEN = 2400U;   // 100ms
+
+CFMBlanking::CFMBlanking() :
+m_posValue(0),
+m_negValue(0),
+m_level(128 * 128),
+m_running(false),
+m_pos(0U),
+m_n(0U)
+{
+}
+
+void CFMBlanking::setParams(uint8_t value, uint8_t level)
+{
+  m_posValue = q15_t(value * 128);
+  m_negValue = -m_posValue;
+
+  m_level = q15_t(level * 128);
+}
+
+q15_t CFMBlanking::process(q15_t sample)
+{
+  if (m_posValue == 0)
+    return sample;
+
+  if (!m_running) {
+    if (sample >= m_posValue) {
+      m_running = true;
+      m_pos = 0U;
+      m_n   = 0U;
+    } else if (sample <= m_negValue) {
+      m_running = true;
+      m_pos = 0U;
+      m_n   = 0U;
+    }
+  }
+
+  if (!m_running)
+    return sample;
+
+  if (m_pos <= BLEEP_LEN) {
+    q31_t value = TONE[m_n++] * m_level;
+    sample = q15_t(__SSAT((value >> 15), 16));
+    if (m_n >= TONE_LEN)
+      m_n = 0U;
+  } else {
+    sample = 0;
+  }
+
+  m_pos++;
+  if (m_pos >= 12000U)
+    m_running = false;
+
+  return sample;
+}

FMBlanking.h

@@ -0,0 +1,41 @@
+/*
+ *   Copyright (C) 2020 by Jonathan Naylor G4KLX
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if !defined(FMBlanking_H)
+#define  FMBlanking_H
+
+#include "Config.h"
+
+class CFMBlanking {
+public:
+  CFMBlanking();
+
+  void setParams(uint8_t value, uint8_t level);
+
+  q15_t process(q15_t sample);
+
+private:
+  q15_t    m_posValue;
+  q15_t    m_negValue;
+  q15_t    m_level;
+  bool     m_running;
+  uint32_t m_pos;
+  uint8_t  m_n;
+};
+
+#endif

FMCTCSSRX.cpp

@@ -0,0 +1,181 @@
+/*
+ *   Copyright (C) 2020 by Jonathan Naylor G4KLX
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "Config.h"
+#include "Globals.h"
+#include "FMCTCSSRX.h"
+
+const struct RX_CTCSS_TABLE {
+  uint8_t frequency;
+  q63_t   coeffDivTwo;
+} RX_CTCSS_TABLE_DATA[] = {
+  { 67U, 2147153298},
+  { 69U, 2147130228},
+  { 71U, 2147103212},
+  { 74U, 2147076297},
+  { 77U, 2147047330},
+  { 79U, 2147016195},
+  { 82U, 2146982775},
+  { 85U, 2146946945},
+  { 88U, 2146907275},
+  { 91U, 2146867538},
+  { 94U, 2146822298},
+  { 97U, 2146785526},
+  {100U, 2146747759},
+  {103U, 2146695349},
+  {107U, 2146637984},
+  {110U, 2146578604},
+  {114U, 2146513835},
+  {118U, 2146445080},
+  {123U, 2146370355},
+  {127U, 2146291161},
+  {131U, 2146205372},
+  {136U, 2146112589},
+  {141U, 2146014479},
+  {146U, 2145910829},
+  {151U, 2145796971},
+  {156U, 2145676831},
+  {159U, 2145604646},
+  {162U, 2145547790},
+  {165U, 2145468230},
+  {167U, 2145409363},
+  {171U, 2145324517},
+  {173U, 2145261046},
+  {177U, 2145170643},
+  {179U, 2145102321},
+  {183U, 2145006080},
+  {186U, 2144932648},
+  {189U, 2144830280},
+  {192U, 2144748638},
+  {196U, 2144639788},
+  {199U, 2144555290},
+  {203U, 2144436713},
+  {206U, 2144346237},
+  {210U, 2144217348},
+  {218U, 2143983951},
+  {225U, 2143735870},
+  {229U, 2143622139},
+  {233U, 2143469001},
+  {241U, 2143182299},
+  {250U, 2142874683},
+  {254U, 2142733729}};
+
+const uint8_t CTCSS_TABLE_DATA_LEN = 50U;
+
+// 4Hz bandwidth
+const uint16_t N = 24000U / 4U;
+
+CFMCTCSSRX::CFMCTCSSRX() :
+m_coeffDivTwo(0),
+m_highThreshold(0),
+m_lowThreshold(0),
+m_count(0U),
+m_q0(0),
+m_q1(0),
+m_result(CTS_NONE)
+{
+}
+
+uint8_t CFMCTCSSRX::setParams(uint8_t frequency, uint8_t highThreshold, uint8_t lowThreshold)
+{
+  m_coeffDivTwo = 0;
+
+  for (uint8_t i = 0U; i < CTCSS_TABLE_DATA_LEN; i++) {
+    if (RX_CTCSS_TABLE_DATA[i].frequency == frequency) {
+      m_coeffDivTwo = RX_CTCSS_TABLE_DATA[i].coeffDivTwo;
+      break;
+    }
+  }
+
+  if (m_coeffDivTwo == 0)
+    return 4U;
+
+  m_highThreshold = q31_t(highThreshold);
+  m_lowThreshold  = q31_t(lowThreshold);
+
+  return 0U;
+}
+
+uint8_t CFMCTCSSRX::process(q15_t sample)
+{
+  //get more dynamic into the decoder by multiplying the sample by 1.5
+  q31_t sample31 = q31_t(sample) +  (q31_t(sample) >> 1);
+
+  m_result &= ~CTS_READY;
+
+  q31_t q2 = m_q1;
+  m_q1 = m_q0;
+
+  // Q31 multiplication, t3 = m_coeffDivTwo * 2 * m_q1
+  q63_t t1 = m_coeffDivTwo * m_q1;
+  q31_t t2 = __SSAT((t1 >> 31), 31);
+  q31_t t3 = t2 * 2;
+
+  // m_q0 = m_coeffDivTwo * m_q1 * 2 - q2 + sample
+  m_q0 = t3 - q2 + sample31;
+
+  m_count++;
+  if (m_count == N) {
+    // Q31 multiplication, t2 = m_q0 * m_q0
+    q63_t t1 = q63_t(m_q0) * q63_t(m_q0);
+    q31_t t2 = __SSAT((t1 >> 31), 31);
+
+    // Q31 multiplication, t4 = m_q0 * m_q0
+    q63_t t3 = q63_t(m_q1) * q63_t(m_q1);
+    q31_t t4 = __SSAT((t3 >> 31), 31);
+
+    // Q31 multiplication, t9 = m_q0 * m_q1 * m_coeffDivTwo * 2
+    q63_t t5 = q63_t(m_q0) * q63_t(m_q1);
+    q31_t t6 = __SSAT((t5 >> 31), 31);
+    q63_t t7 = t6 * m_coeffDivTwo;
+    q31_t t8 = __SSAT((t7 >> 31), 31);
+    q31_t t9  = t8 * 2;
+
+    // value = m_q0 * m_q0 + m_q1 * m_q1 - m_q0 * m_q1 * m_coeffDivTwo * 2
+    q31_t value = t2 + t4 - t9;
+
+    bool previousCTCSSValid = CTCSS_VALID(m_result);
+
+    q31_t threshold = m_highThreshold;
+    if (previousCTCSSValid)
+      threshold = m_lowThreshold;
+
+    m_result |= CTS_READY;
+    if (value >= threshold)
+      m_result |= CTS_VALID;
+    else
+      m_result &= ~CTS_VALID;
+
+    if (previousCTCSSValid != CTCSS_VALID(m_result))
+      DEBUG4("CTCSS Value / Threshold / Valid", value, threshold, CTCSS_VALID(m_result));
+
+    m_count = 0U;
+    m_q0 = 0;
+    m_q1 = 0;
+  }
+
+  return m_result;
+}
+
+void CFMCTCSSRX::reset()
+{
+  m_q0 = 0;
+  m_q1 = 0;
+  m_result = CTS_NONE;
+  m_count  = 0U;
+}

FMCTCSSRX.h

@@ -0,0 +1,53 @@
+/*
+ *   Copyright (C) 2020 by Jonathan Naylor G4KLX
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if !defined(FMCTCSSRX_H)
+#define  FMCTCSSRX_H
+
+#include "Config.h"
+
+const uint8_t CTS_NONE  = 0U;
+const uint8_t CTS_READY = 1U;
+const uint8_t CTS_VALID = 2U;
+
+#define CTCSS_READY(a) ((a & CTS_READY) != 0)
+#define CTCSS_NOT_READY(a) ((a & CTS_READY) == 0)
+#define CTCSS_VALID(a) ((a & CTS_VALID) != 0)
+#define CTCSS_NOT_VALID(a) ((a & CTS_VALID) == 0)
+
+class CFMCTCSSRX {
+public:
+  CFMCTCSSRX();
+
+  uint8_t setParams(uint8_t frequency, uint8_t highThreshold, uint8_t lowThreshold);
+  
+  uint8_t process(q15_t sample);
+
+  void reset();
+
+private:
+  q63_t    m_coeffDivTwo;
+  q31_t    m_highThreshold;
+  q31_t    m_lowThreshold;
+  uint16_t m_count;
+  q31_t    m_q0;
+  q31_t    m_q1;
+  uint8_t  m_result;
+};
+
+#endif

FMCTCSSTX.cpp

@@ -0,0 +1,128 @@
+/*
+ *   Copyright (C) 2020 by Jonathan Naylor G4KLX
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "Config.h"
+#include "Globals.h"
+#include "FMCTCSSTX.h"
+
+const struct TX_CTCSS_TABLE {
+  uint8_t  frequency;
+  uint16_t length;
+  q31_t    increment;
+} TX_CTCSS_TABLE_DATA[] = {
+  { 67U, 358U, 5995059},
+  { 69U, 346U, 6200860},
+  { 71U, 334U, 6433504},
+  { 74U, 323U, 6657200},
+  { 77U, 312U, 6889844},
+  { 79U, 301U, 7131436},
+  { 82U, 291U, 7381976},
+  { 85U, 281U, 7641463},
+  { 88U, 271U, 7918846},
+  { 91U, 262U, 8187282},
+  { 94U, 253U, 8482561},
+  { 97U, 246U, 8715205},
+  {100U, 240U, 8947849},
+  {103U, 232U, 9261024},
+  {107U, 224U, 9592094},
+  {110U, 216U, 9923165},
+  {114U, 209U, 10272131},
+  {118U, 202U, 10630045},
+  {123U, 195U, 11005854},
+  {127U, 189U, 11390612},
+  {131U, 182U, 11793265},
+  {136U, 176U, 12213814},
+  {141U, 170U, 12643310},
+  {146U, 164U, 13081755},
+  {151U, 159U, 13547043},
+  {156U, 153U, 14021279},
+  {159U, 150U, 14298662},
+  {162U, 148U, 14513411},
+  {165U, 145U, 14808690},
+  {167U, 143U, 15023438},
+  {171U, 140U, 15327665},
+  {173U, 138U, 15551361},
+  {177U, 135U, 15864536},
+  {179U, 133U, 16097180},
+  {183U, 131U, 16419303},
+  {186U, 129U, 16660894},
+  {189U, 126U, 16991965},
+  {192U, 124U, 17251452},
+  {196U, 122U, 17591471},
+  {199U, 120U, 17850958},
+  {203U, 118U, 18208872},
+  {206U, 116U, 18477308},
+  {210U, 114U, 18853117},
+  {218U, 110U, 19515258},
+  {225U, 106U, 20195295},
+  {229U, 105U, 20499521},
+  {233U, 103U, 20902175},
+  {241U,  99U, 21635898},
+  {250U,  96U, 22396465},
+  {254U,  94U, 22736484}};
+
+const uint8_t CTCSS_TABLE_DATA_LEN = 50U;
+
+CFMCTCSSTX::CFMCTCSSTX() :
+m_values(NULL),
+m_length(0U),
+m_n(0U)
+{
+}
+
+uint8_t CFMCTCSSTX::setParams(uint8_t frequency, uint8_t level)
+{
+  const TX_CTCSS_TABLE* entry = NULL;
+
+  for (uint8_t i = 0U; i < CTCSS_TABLE_DATA_LEN; i++) {
+    if (TX_CTCSS_TABLE_DATA[i].frequency == frequency) {
+      entry = TX_CTCSS_TABLE_DATA + i;
+      break;
+    }
+  }
+
+  if (entry == NULL)
+    return 4U;
+
+  m_length = entry->length;
+
+  delete[] m_values;
+  m_values = new q15_t[m_length];
+
+  q31_t arg = 0;
+  for (uint16_t i = 0U; i < m_length; i++) {
+    q63_t value = ::arm_sin_q31(arg) * q63_t(level * 13);
+    m_values[i] = q15_t(__SSAT((value >> 31), 16));
+
+    arg += entry->increment;
+  }
+
+  return 0U;
+}
+
+q15_t CFMCTCSSTX::getAudio(bool reverse)
+{
+  q15_t sample = m_values[m_n++];
+  if (m_n >= m_length)
+    m_n = 0U;
+  
+  if (reverse)
+    return -sample;
+  else
+    return sample;
+}

FMCTCSSTX.h

@@ -0,0 +1,38 @@
+/*
+ *   Copyright (C) 2020 by Jonathan Naylor G4KLX
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if !defined(FMCTCSSTX_H)
+#define  FMCTCSSTX_H
+
+#include "Config.h"
+
+class CFMCTCSSTX {
+public:
+  CFMCTCSSTX();
+
+  uint8_t setParams(uint8_t frequency, uint8_t level);
+
+  q15_t getAudio(bool reverse);
+
+private:
+  q15_t*   m_values;
+  uint16_t m_length;
+  uint16_t m_n;
+};
+
+#endif

FMDirectForm1.h

@@ -0,0 +1,111 @@
+
+/*******************************************************************************
+This header file has been taken from:
+"A Collection of Useful C++ Classes for Digital Signal Processing"
+By Vinnie Falco 
+Bernd Porr adapted it for Linux and turned it into a filter using
+fixed point arithmetic.
+--------------------------------------------------------------------------------
+License: MIT License (http://www.opensource.org/licenses/mit-license.php)
+Copyright (c) 2009 by Vinnie Falco
+Copyright (C) 2013-2017, Bernd Porr, [email protected]
+Copyright (C) 2020 , Mario Molitor , [email protected]
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+*******************************************************************************/
+
+// based on https://raw.githubusercontent.com/berndporr/iir_fixed_point/master/DirectFormI.h
+
+#include "Globals.h"
+
+#ifndef DIRECTFORMI_H_
+#define DIRECTFORMI_H_
+class CFMDirectFormI
+{
+public:
+
+	// convenience function which takes the a0 argument but ignores it!
+	CFMDirectFormI(const q31_t b0, const q31_t b1, const q31_t b2,
+			const q31_t, const q31_t a1, const q31_t a2)
+	{
+		// FIR coefficients
+		c_b0 = b0;
+		c_b1 = b1;
+		c_b2 = b2;
+		// IIR coefficients
+		c_a1 = a1;
+		c_a2 = a2;
+		reset();
+	}
+
+	CFMDirectFormI(const CFMDirectFormI &my)
+	{
+	// delay line
+		m_x2 = my.m_x2; // x[n-2]
+		m_y2 = my.m_y2; // y[n-2]
+		m_x1 = my.m_x1; // x[n-1]
+		m_y1 = my.m_y1; // y[n-1]
+
+	// coefficients
+		c_b0 = my.c_b0;
+		c_b1 = my.c_b1;
+		c_b2 = my.c_b2; // FIR
+		c_a1 = my.c_a1;
+		c_a2 = my.c_a2; // IIR
+    }
+
+	void reset ()
+	{
+		m_x1 = 0;
+		m_x2 = 0;
+		m_y1 = 0;
+		m_y2 = 0;
+	}
+
+	// filtering operation: one sample in and one out
+	inline q15_t filter(const q15_t in)
+	{
+		// calculate the output
+		register q31_t out_upscaled = c_b0 * in
+									+ c_b1 * m_x1
+									+ c_b2 * m_x2
+									- c_a1 * m_y1
+									- c_a2 * m_y2;
+
+		q15_t out = __SSAT(out_upscaled >> 15, 15);
+
+		// update the delay lines
+		m_x2 = m_x1;
+		m_y2 = m_y1;
+		m_x1 = in;
+		m_y1 = out;
+
+		return out;
+	}
+
+private:
+	// delay line
+	q31_t m_x2; // x[n-2]
+	q31_t m_y2; // y[n-2]
+	q31_t m_x1; // x[n-1]
+	q31_t m_y1; // y[n-1]
+
+	// coefficients
+	q31_t c_b0,c_b1,c_b2; // FIR
+	q31_t c_a1,c_a2; // IIR
+};
+
+#endif /* DIRECTFORMI_H */

FMDownsampleRB.cpp

@@ -0,0 +1,101 @@
+/*
+ *   Copyright (C) 2020 by Jonathan Naylor G4KLX
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#include "FMDownsampleRB.h"
+
+CFMDownsampleRB::CFMDownsampleRB(uint16_t length) :
+m_length(length),
+m_head(0U),
+m_tail(0U),
+m_full(false),
+m_overflow(false)
+{
+  m_samples = new uint8_t[length];
+}
+
+uint16_t CFMDownsampleRB::getSpace() const
+{
+  uint16_t n = 0U;
+
+  if (m_tail == m_head)
+    n = m_full ? 0U : m_length;
+  else if (m_tail < m_head)
+    n = m_length - m_head + m_tail;
+  else
+    n = m_tail - m_head;
+
+  if (n > m_length)
+    n = 0U;
+
+  return n;
+}
+
+uint16_t CFMDownsampleRB::getData() const
+{
+  if (m_tail == m_head)
+    return m_full ? m_length : 0U;
+  else if (m_tail < m_head)
+    return m_head - m_tail;
+  else
+    return m_length - m_tail + m_head;
+}
+
+bool CFMDownsampleRB::put(uint8_t sample)
+{
+  if (m_full) {
+    m_overflow = true;
+    return false;
+  }
+
+  m_samples[m_head] = sample;
+
+  m_head++;
+  if (m_head >= m_length)
+    m_head = 0U;
+
+  if (m_head == m_tail)
+    m_full = true;
+
+  return true;
+}
+
+bool CFMDownsampleRB::get(uint8_t& sample)
+{
+  if (m_head == m_tail && !m_full)
+    return false;
+
+  sample = m_samples[m_tail];
+
+  m_full = false;
+
+  m_tail++;
+  if (m_tail >= m_length)
+    m_tail = 0U;
+
+  return true;
+}
+
+bool CFMDownsampleRB::hasOverflowed()
+{
+  bool overflow = m_overflow;
+
+  m_overflow = false;
+
+  return overflow;
+}

FMDownsampleRB.h

@@ -0,0 +1,68 @@
+/*
+ *   Copyright (C) 2020 by Jonathan Naylor G4KLX
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if !defined(FMDOWNSAMPLERB_H)
+#define  FMDOWNSAMPLERB_H
+
+#if defined(STM32F4XX)
+#include "stm32f4xx.h"
+#elif defined(STM32F7XX)
+#include "stm32f7xx.h"
+#elif defined(STM32F105xC)
+#include "stm32f1xx.h"
+#include <cstddef>
+#else
+#include <Arduino.h>
+#endif
+
+#if defined(__SAM3X8E__) || defined(STM32F105xC)
+#define  ARM_MATH_CM3
+#elif defined(STM32F7XX)
+#define  ARM_MATH_CM7
+#elif defined(STM32F4XX) || defined(__MK20DX256__) || defined(__MK64FX512__) || defined(__MK66FX1M0__)
+#define  ARM_MATH_CM4
+#else
+#error "Unknown processor type"
+#endif
+
+#include <arm_math.h>
+
+class CFMDownsampleRB {
+public:
+  CFMDownsampleRB(uint16_t length);
+  
+  uint16_t getSpace() const;
+  
+  uint16_t getData() const;
+
+  bool put(uint8_t sample);
+
+  bool get(uint8_t& sample);
+
+  bool hasOverflowed();
+
+private:
+  uint16_t          m_length;
+  volatile uint8_t* m_samples;
+  volatile uint16_t m_head;
+  volatile uint16_t m_tail;
+  volatile bool     m_full;
+  bool              m_overflow;
+};
+
+#endif

FMDownsampler.cpp

@@ -0,0 +1,63 @@
+/*
+ *   Copyright (C) 2020 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2020 by Geoffrey Merck F4FXL - KC3FRA
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "Config.h"
+#include "FMDownsampler.h"
+
+
+CFMDownsampler::CFMDownsampler(uint16_t length) :
+m_ringBuffer(length),//length might need tweaking
+m_packIndex(0),
+m_downSampleIndex(0)
+{
+    m_samplePack = 0;
+}
+
+void CFMDownsampler::addSample(q15_t sample)
+{
+    //only take one of three samples
+    if(m_downSampleIndex == 0) {
+      switch(m_packIndex){
+        case 0:
+          m_samplePack = int32_t(sample) << 12;
+        break;
+        case 1:{
+            m_samplePack |= int32_t(sample);
+            
+            //we did not use MSB; skip it
+            m_ringBuffer.put(m_samplePackBytes[1]); 
+            m_ringBuffer.put(m_samplePackBytes[2]); 
+            m_ringBuffer.put(m_samplePackBytes[3]); 
+
+            m_samplePack = 0;
+        }
+        break;
+        default:
+            //should never happen
+        break;
+        }
+        m_packIndex++;
+        if(m_packIndex >= 2)
+            m_packIndex = 0;  
+    }
+
+    m_downSampleIndex++;
+    if(m_downSampleIndex >= 3)
+        m_downSampleIndex = 0;
+}

FMDownsampler.h

@@ -0,0 +1,43 @@
+/*
+ *   Copyright (C) 2020 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2020 by Geoffrey Merck F4FXL - KC3FRA
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if !defined(FMDOWNSAMPLER_H)
+#define FMDOWNSAMPLER_H
+
+#include "Config.h"
+#include "FMDownsampleRB.h"
+
+class CFMDownsampler {
+public:
+  CFMDownsampler(uint16_t length);
+  void addSample(q15_t sample);
+  inline bool getPackedData(uint8_t& data){ return m_ringBuffer.get(data); };
+  inline bool hasOverflowed() { return m_ringBuffer.hasOverflowed(); };
+
+private:
+  CFMDownsampleRB m_ringBuffer;
+  union {
+    int32_t m_samplePack;
+    int8_t  m_samplePackBytes[4];
+  };
+  uint8_t m_packIndex;
+  uint8_t m_downSampleIndex;
+};
+
+#endif

FMKeyer.cpp

@@ -0,0 +1,216 @@
+/*
+ *   Copyright (C) 2020 by Jonathan Naylor G4KLX
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "Config.h"
+#include "Globals.h"
+#include "FMKeyer.h"
+
+const struct {
+  char     c;
+  uint32_t pattern;
+  uint8_t  length;
+} SYMBOL_LIST[] = {
+  {'A', 0xB8000000U, 8U},
+  {'B', 0xEA800000U, 12U},
+  {'C', 0xEBA00000U, 14U},
+  {'D', 0xEA000000U, 10U},
+  {'E', 0x80000000U, 4U},
+  {'F', 0xAE800000U, 12U},
+  {'G', 0xEE800000U, 12U},
+  {'H', 0xAA000000U, 10U},
+  {'I', 0xA0000000U, 6U},
+  {'J', 0xBBB80000U, 16U},
+  {'K', 0xEB800000U, 12U},
+  {'L', 0xBA800000U, 12U},
+  {'M', 0xEE000000U, 10U},
+  {'N', 0xE8000000U, 8U},
+  {'O', 0xEEE00000U, 14U},
+  {'P', 0xBBA00000U, 14U},
+  {'Q', 0xEEB80000U, 16U},
+  {'R', 0xBA000000U, 10U},
+  {'S', 0xA8000000U, 8U},
+  {'T', 0xE0000000U, 6U},
+  {'U', 0xAE000000U, 10U},
+  {'V', 0xAB800000U, 12U},
+  {'W', 0xBB800000U, 12U},
+  {'X', 0xEAE00000U, 14U},
+  {'Y', 0xEBB80000U, 16U},
+  {'Z', 0xEEA00000U, 14U},
+  {'1', 0xBBBB8000U, 20U},
+  {'2', 0xAEEE0000U, 18U},
+  {'3', 0xABB80000U, 16U},
+  {'4', 0xAAE00000U, 14U},
+  {'5', 0xAA800000U, 12U},
+  {'6', 0xEAA00000U, 14U},
+  {'7', 0xEEA80000U, 16U},
+  {'8', 0xEEEA0000U, 18U},
+  {'9', 0xEEEE8000U, 20U},
+  {'0', 0xEEEEE000U, 22U},
+  {'/', 0xEAE80000U, 16U},
+  {'?', 0xAEEA0000U, 18U},
+  {',', 0xEEAEE000U, 22U},
+  {'-', 0xEAAE0000U, 18U},
+  {'=', 0xEAB80000U, 16U},
+  {'.', 0xBAEB8000U, 20U},
+  {' ', 0x00000000U, 4U},
+  {0U,  0x00000000U, 0U}
+};
+
+const uint8_t BIT_MASK_TABLE[] = {0x80U, 0x40U, 0x20U, 0x10U, 0x08U, 0x04U, 0x02U, 0x01U};
+
+#define WRITE_BIT_FM(p,i,b) p[(i)>>3] = (b) ? (p[(i)>>3] | BIT_MASK_TABLE[(i)&7]) : (p[(i)>>3] & ~BIT_MASK_TABLE[(i)&7])
+#define READ_BIT_FM(p,i)    (p[(i)>>3] & BIT_MASK_TABLE[(i)&7])
+
+CFMKeyer::CFMKeyer() :
+m_wanted(false),
+m_poBuffer(),
+m_poLen(0U),
+m_poPos(0U),
+m_dotLen(0U),
+m_dotPos(0U),
+m_audio(NULL),
+m_audioLen(0U),
+m_audioPos(0U),
+m_highLevel(0U),
+m_lowLevel(0)
+{
+}
+
+uint8_t CFMKeyer::setParams(const char* text, uint8_t speed, uint16_t frequency, uint8_t highLevel, uint8_t lowLevel)
+{
+  m_poLen = 0U;
+
+  for (uint8_t i = 0U; text[i] != '\0'; i++) {
+    for (uint8_t j = 0U; SYMBOL_LIST[j].c != 0U; j++) {
+      if (SYMBOL_LIST[j].c == text[i]) {
+        uint32_t MASK = 0x80000000U;
+        for (uint8_t k = 0U; k < SYMBOL_LIST[j].length; k++, m_poLen++, MASK >>= 1) {
+          bool b = (SYMBOL_LIST[j].pattern & MASK) == MASK;
+          WRITE_BIT_FM(m_poBuffer, m_poLen, b);
+
+          if (m_poLen >= 995U) {
+            m_poLen = 0U;
+            return 4U;
+          }
+        }
+
+        break;
+      }
+    }
+  }
+
+  m_highLevel = q15_t(highLevel);
+  m_lowLevel  = q15_t(lowLevel);
+
+  m_dotLen = 24000U / speed;   // In samples
+
+  m_audioLen = 24000U / frequency; // In samples
+
+  delete[] m_audio;
+  m_audio = new bool[m_audioLen];
+
+  for (uint16_t i = 0U; i < m_audioLen; i++) {
+    if (i < (m_audioLen / 2U))
+      m_audio[i] = true;
+    else
+      m_audio[i] = false;
+  }
+
+  return 0U;
+}
+
+q15_t CFMKeyer::getHighAudio()
+{
+  q15_t output = 0U;
+  if (!m_wanted)
+    return 0U;
+
+  bool b = READ_BIT_FM(m_poBuffer, m_poPos);
+  if (b)
+    output = m_audio[m_audioPos] ? m_highLevel : -m_highLevel;
+
+  m_audioPos++;
+  if (m_audioPos >= m_audioLen)
+    m_audioPos = 0U;
+  m_dotPos++;
+  if (m_dotPos >= m_dotLen) {
+    m_dotPos = 0U;
+    m_poPos++;
+    if (m_poPos >= m_poLen) {
+      stop();
+      return output;
+    }
+  }
+
+  return output;
+}
+
+q15_t CFMKeyer::getLowAudio()
+{
+  q15_t output = 0U;
+  if (!m_wanted)
+    return 0U;
+
+  bool b = READ_BIT_FM(m_poBuffer, m_poPos);
+  if (b)
+    output = m_audio[m_audioPos] ? m_lowLevel : -m_lowLevel;
+
+  m_audioPos++;
+  if (m_audioPos >= m_audioLen)
+    m_audioPos = 0U;
+  m_dotPos++;
+  if (m_dotPos >= m_dotLen) {
+    m_dotPos = 0U;
+    m_poPos++;
+    if (m_poPos >= m_poLen) {
+      stop();
+      return output;
+    }
+  }
+
+  return output;
+}
+
+void CFMKeyer::start()
+{
+  if (isRunning())
+    return;
+
+  m_wanted   = true;
+  m_poPos    = 0U;
+  m_dotPos   = 0U;
+  m_audioPos = 0U;
+}
+
+void CFMKeyer::stop()
+{
+  m_wanted   = false;
+  m_poPos    = 0U;
+  m_dotPos   = 0U;
+  m_audioPos = 0U;
+}
+
+bool CFMKeyer::isWanted() const
+{
+  return m_wanted;
+}
+
+bool CFMKeyer::isRunning() const
+{
+  return m_poPos > 0U || m_dotPos > 0U || m_audioPos > 0U;
+}

FMKeyer.h

@@ -0,0 +1,54 @@
+/*
+ *   Copyright (C) 2020 by Jonathan Naylor G4KLX
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if !defined(FMKeyer_H)
+#define  FMKeyer_H
+
+#include "Config.h"
+
+class CFMKeyer {
+public:
+  CFMKeyer();
+
+  uint8_t setParams(const char* text, uint8_t speed, uint16_t frequency, uint8_t highLevel, uint8_t lowLevel);
+
+  q15_t getHighAudio();
+  q15_t getLowAudio();
+
+  void start();
+  void stop();
+
+  bool isRunning() const;
+
+  bool isWanted() const;
+
+private:
+  bool     m_wanted;
+  uint8_t  m_poBuffer[1000U];
+  uint16_t m_poLen;
+  uint16_t m_poPos;
+  uint16_t m_dotLen;
+  uint16_t m_dotPos;
+  bool*    m_audio;
+  uint16_t m_audioLen;
+  uint16_t m_audioPos;
+  q15_t    m_highLevel;
+  q15_t    m_lowLevel;
+};
+
+#endif

FMRB.cpp

@@ -0,0 +1,110 @@
+/*
+TX fifo control - Copyright (C) KI6ZUM 2015
+Copyright (C) 2015,2016,2020 by Jonathan Naylor G4KLX
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Library General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+Library General Public License for more details.
+
+You should have received a copy of the GNU Library General Public
+License along with this library; if not, write to the
+Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
+Boston, MA  02110-1301, USA.
+*/
+
+#include "FMRB.h"
+
+CFMRB::CFMRB(uint16_t length) :
+m_length(length),
+m_head(0U),
+m_tail(0U),
+m_full(false),
+m_overflow(false)
+{
+  m_samples = new q15_t[length];
+}
+
+uint16_t CFMRB::getSpace() const
+{
+  uint16_t n = 0U;
+
+  if (m_tail == m_head)
+    n = m_full ? 0U : m_length;
+  else if (m_tail < m_head)
+    n = m_length - m_head + m_tail;
+  else
+    n = m_tail - m_head;
+
+  if (n > m_length)
+    n = 0U;
+
+  return n;
+}
+
+uint16_t CFMRB::getData() const
+{
+  if (m_tail == m_head)
+    return m_full ? m_length : 0U;
+  else if (m_tail < m_head)
+    return m_head - m_tail;
+  else
+    return m_length - m_tail + m_head;
+}
+
+bool CFMRB::put(q15_t sample)
+{
+  if (m_full) {
+    m_overflow = true;
+    return false;
+  }
+
+  m_samples[m_head] = sample;
+
+  m_head++;
+  if (m_head >= m_length)
+    m_head = 0U;
+
+  if (m_head == m_tail)
+    m_full = true;
+
+  return true;
+}
+
+bool CFMRB::get(q15_t& sample)
+{
+  if (m_head == m_tail && !m_full)
+    return false;
+
+  sample = m_samples[m_tail];
+
+  m_full = false;
+
+  m_tail++;
+  if (m_tail >= m_length)
+    m_tail = 0U;
+
+  return true;
+}
+
+bool CFMRB::hasOverflowed()
+{
+  bool overflow = m_overflow;
+
+  m_overflow = false;
+
+  return overflow;
+}
+
+void CFMRB::reset()
+{
+  m_head = 0U;
+  m_tail = 0U;
+  m_full     = false;
+  m_overflow = false;
+}

FMRB.h

@@ -0,0 +1,72 @@
+/*
+Serial fifo control - Copyright (C) KI6ZUM 2015
+Copyright (C) 2015,2016,2020 by Jonathan Naylor G4KLX
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Library General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+This library is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+Library General Public License for more details.
+
+You should have received a copy of the GNU Library General Public
+License along with this library; if not, write to the
+Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
+Boston, MA  02110-1301, USA.
+*/
+
+#if !defined(FMRB_H)
+#define  FMRB_H
+
+#if defined(STM32F4XX)
+#include "stm32f4xx.h"
+#elif defined(STM32F7XX)
+#include "stm32f7xx.h"
+#elif defined(STM32F105xC)
+#include "stm32f1xx.h"
+#include <cstddef>
+#else
+#include <Arduino.h>
+#endif
+
+#if defined(__SAM3X8E__) || defined(STM32F105xC)
+#define  ARM_MATH_CM3
+#elif defined(STM32F7XX)
+#define  ARM_MATH_CM7
+#elif defined(STM32F4XX) || defined(__MK20DX256__) || defined(__MK64FX512__) || defined(__MK66FX1M0__)
+#define  ARM_MATH_CM4
+#else
+#error "Unknown processor type"
+#endif
+
+#include <arm_math.h>
+
+class CFMRB {
+public:
+  CFMRB(uint16_t length);
+  
+  uint16_t getSpace() const;
+  
+  uint16_t getData() const;
+
+  bool put(q15_t sample);
+
+  bool get(q15_t& sample);
+
+  bool hasOverflowed();
+
+  void reset();
+
+private:
+  uint16_t          m_length;
+  volatile q15_t*   m_samples;
+  volatile uint16_t m_head;
+  volatile uint16_t m_tail;
+  volatile bool     m_full;
+  bool              m_overflow;
+};
+
+#endif

FMTimeout.cpp

@@ -0,0 +1,74 @@
+/*
+ *   Copyright (C) 2020 by Jonathan Naylor G4KLX
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "Config.h"
+#include "Globals.h"
+#include "FMTimeout.h"
+
+// 400 Hz sine wave at 24000 Hz sample rate
+const q15_t BUSY_AUDIO[] = {0, 3426, 6813, 10126, 13328, 16384, 19261, 21926, 24351, 26510, 28378, 29935, 31164, 32052, 32588, 32767, 32588, 32052, 31164, 29935, 28378, 26510, 24351,
+                            21926, 19261, 16384, 13328, 10126, 6813, 3425, 0, -3425, -6813, -10126, -13328, -16384, -19261, -21926, -24351, -26510, -28378, -29935, -31164, -32052,
+                            -32588, -32768, -32588, -32052, -31164, -29935, -28378, -26510, -24351, -21926, -19261, -16384, -13328, -10126, -6813, -3425};
+const uint8_t BUSY_AUDIO_LEN = 60U;
+
+CFMTimeout::CFMTimeout() :
+m_level(128 * 128),
+m_running(false),
+m_pos(0U),
+m_n(0U)
+{
+}
+
+void CFMTimeout::setParams(uint8_t level)
+{
+  m_level = q15_t(level * 5);
+}
+
+q15_t CFMTimeout::getAudio()
+{
+  q15_t sample = 0;
+  if (!m_running)
+    return sample;
+
+  if (m_pos >= 12000U) {
+    q31_t sample31 = BUSY_AUDIO[m_n] * m_level;
+    sample = q15_t(__SSAT((sample31 >> 15), 16));
+
+    m_n++;
+    if (m_n >= BUSY_AUDIO_LEN)
+      m_n = 0U;
+  }
+
+  m_pos++;
+  if (m_pos >= 24000U)
+    m_pos = 0U;
+
+  return sample;
+}
+
+void CFMTimeout::start()
+{
+  m_running = true;
+  m_pos = 0U;
+  m_n   = 0U;
+}
+
+void CFMTimeout::stop()
+{
+  m_running = false;
+}

FMTimeout.h

@@ -0,0 +1,42 @@
+/*
+ *   Copyright (C) 2020 by Jonathan Naylor G4KLX
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if !defined(FMTimeout_H)
+#define  FMTimeout_H
+
+#include "Config.h"
+
+class CFMTimeout {
+public:
+  CFMTimeout();
+
+  void setParams(uint8_t level);
+
+  void start();
+  void stop();
+
+  q15_t getAudio();
+
+private:
+  q15_t    m_level;
+  bool     m_running;
+  uint32_t m_pos;
+  uint8_t  m_n;
+};
+
+#endif

FMTimer.cpp

@@ -0,0 +1,70 @@
+/*
+ *   Copyright (C) 2009,2010,2015,2020 by Jonathan Naylor G4KLX
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "Config.h"
+#include "Globals.h"
+#include "FMTimer.h"
+
+CFMTimer::CFMTimer() :
+m_timeout(0U),
+m_timer(0U)
+{
+}
+
+void CFMTimer::setTimeout(uint16_t secs, uint32_t msecs)
+{
+  m_timeout = (secs * 24000U) + (msecs * 24U);
+}
+
+uint32_t CFMTimer::getTimeout() const
+{
+  return m_timeout / 24U;
+}
+
+void CFMTimer::start()
+{
+  if (m_timeout > 0U)
+    m_timer = 1U;
+}
+
+void CFMTimer::stop()
+{
+  m_timer = 0U;
+}
+
+void CFMTimer::clock(uint8_t length)
+{
+  if (m_timer > 0U && m_timeout > 0U)
+    m_timer += length;
+}
+
+bool CFMTimer::isRunning() const
+{
+  return m_timer > 0U;
+}
+
+bool CFMTimer::hasExpired() const
+{
+  if (m_timeout == 0U || m_timer == 0U)
+    return false;
+
+  if (m_timer > m_timeout)
+    return true;
+
+  return false;
+}

FMTimer.h

@@ -0,0 +1,47 @@
+/*
+ *   Copyright (C) 2009,2010,2015,2020 by Jonathan Naylor G4KLX
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if !defined(FMTimer_H)
+#define  FMTimer_H
+
+#include "Config.h"
+
+class CFMTimer {
+public:
+  CFMTimer();
+
+  void setTimeout(uint16_t secs, uint32_t msecs);
+
+  uint32_t getTimeout() const;
+
+  void start();
+  
+  void stop();
+
+  void clock(uint8_t length);
+
+  bool isRunning() const;
+  
+  bool hasExpired() const;
+
+private:
+  uint32_t m_timeout;
+  uint32_t m_timer;
+};
+
+#endif

Globals.h

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2015,2016,2017,2018 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2015,2016,2017,2018,2020 by Jonathan Naylor G4KLX
  *
  *   This program is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by
@@ -50,6 +50,8 @@ enum MMDVM_STATE {
   STATE_P25       = 4,
   STATE_NXDN      = 5,
   STATE_POCSAG    = 6,
+  STATE_M17       = 7,
+  STATE_FM        = 10,
 
   // Dummy states start at 90
   STATE_NXDNCAL1K = 91,
@@ -62,7 +64,13 @@ enum MMDVM_STATE {
   STATE_DMRCAL    = 98,
   STATE_DSTARCAL  = 99,
   STATE_INTCAL    = 100,
-  STATE_POCSAGCAL = 101
+  STATE_POCSAGCAL = 101,
+  STATE_FMCAL10K  = 102,
+  STATE_FMCAL12K  = 103,
+  STATE_FMCAL15K  = 104,
+  STATE_FMCAL20K  = 105,
+  STATE_FMCAL25K  = 106,
+  STATE_FMCAL30K  = 107
 };
 
 #include "SerialPort.h"
@@ -77,11 +85,14 @@ enum MMDVM_STATE {
 #include "YSFTX.h"
 #include "P25RX.h"
 #include "P25TX.h"
+#include "M17RX.h"
+#include "M17TX.h"
 #include "NXDNRX.h"
 #include "NXDNTX.h"
 #include "POCSAGTX.h"
 #include "CalDStarRX.h"
 #include "CalDStarTX.h"
+#include "CalFM.h"
 #include "CalDMR.h"
 #include "CalP25.h"
 #include "CalNXDN.h"
@@ -90,6 +101,7 @@ enum MMDVM_STATE {
 #include "CWIdTX.h"
 #include "Debug.h"
 #include "IO.h"
+#include "FM.h"
 
 const uint8_t  MARK_SLOT1 = 0x08U;
 const uint8_t  MARK_SLOT2 = 0x04U;
@@ -114,6 +126,8 @@ extern bool m_ysfEnable;
 extern bool m_p25Enable;
 extern bool m_nxdnEnable;
 extern bool m_pocsagEnable;
+extern bool m_m17Enable;
+extern bool m_fmEnable;
 
 extern bool m_duplex;
 
@@ -144,9 +158,15 @@ extern CNXDNTX nxdnTX;
 
 extern CPOCSAGTX pocsagTX;
 
+extern CM17RX m17RX;
+extern CM17TX m17TX;
+
+extern CFM fm;
+
 extern CCalDStarRX calDStarRX;
 extern CCalDStarTX calDStarTX;
 extern CCalDMR     calDMR;
+extern CCalFM      calFM;
 extern CCalP25     calP25;
 extern CCalNXDN    calNXDN;
 extern CCalPOCSAG  calPOCSAG;
@@ -155,4 +175,3 @@ extern CCalRSSI    calRSSI;
 extern CCWIdTX cwIdTX;
 
 #endif
-

IO.cpp

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2015,2016,2017,2018 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2015,2016,2017,2018,2020 by Jonathan Naylor G4KLX
  *   Copyright (C) 2015 by Jim Mclaughlin KI6ZUM
  *   Copyright (C) 2016 by Colin Durbridge G4EML
  *
@@ -32,6 +32,12 @@ static q15_t RRC_0_2_FILTER[] = {401, 104, -340, -731, -847, -553, 112, 909, 147
                                  -553, -847, -731, -340, 104, 401, 0};
 const uint16_t RRC_0_2_FILTER_LEN = 42U;
 
+// Generated using rcosdesign(0.5, 8, 5, 'sqrt') in MATLAB
+static q15_t RRC_0_5_FILTER[] = {-147, -88, 72, 220, 223, 46, -197, -285, -79, 334, 623, 390, -498, -1691, -2363, -1556, 1284, 5872, 11033,
+				  15109, 16656, 15109, 11033, 5872, 1284, -1556, -2363, -1691, -498, 390, 623, 334, -79, -285, -197, 46, 223,
+				  220, 72, -88, -147, 0};
+const uint16_t RRC_0_5_FILTER_LEN = 42U;
+
 // Generated using rcosdesign(0.2, 8, 10, 'sqrt') in MATLAB
 static q15_t NXDN_0_2_FILTER[] = {284, 198, 73, -78, -240, -393, -517, -590, -599, -533, -391, -181, 79, 364, 643, 880, 1041, 1097, 1026, 819,
                                   483, 39, -477, -1016, -1516, -1915, -2150, -2164, -1914, -1375, -545, 557, 1886, 3376, 4946, 6502, 7946, 9184,
@@ -61,12 +67,14 @@ m_txBuffer(TX_RINGBUFFER_SIZE),
 m_rssiBuffer(RX_RINGBUFFER_SIZE),
 m_dcFilter(),
 m_dcState(),
-m_rrcFilter(),
+m_rrc02Filter(),
+m_rrc05Filter(),
 m_gaussianFilter(),
 m_boxcarFilter(),
 m_nxdnFilter(),
 m_nxdnISincFilter(),
-m_rrcState(),
+m_rrc02State(),
+m_rrc05State(),
 m_gaussianState(),
 m_boxcarState(),
 m_nxdnState(),
@@ -79,9 +87,12 @@ m_dmrTXLevel(128 * 128),
 m_ysfTXLevel(128 * 128),
 m_p25TXLevel(128 * 128),
 m_nxdnTXLevel(128 * 128),
+m_m17TXLevel(128 * 128),
 m_pocsagTXLevel(128 * 128),
+m_fmTXLevel(128 * 128),
 m_rxDCOffset(DC_OFFSET),
 m_txDCOffset(DC_OFFSET),
+m_useCOSAsLockout(false),
 m_ledCount(0U),
 m_ledValue(true),
 m_detect(false),
@@ -90,7 +101,8 @@ m_dacOverflow(0U),
 m_watchdog(0U),
 m_lockout(false)
 {
-  ::memset(m_rrcState,      0x00U,  70U * sizeof(q15_t));
+  ::memset(m_rrc02State,    0x00U,  70U * sizeof(q15_t));
+  ::memset(m_rrc05State,    0x00U,  70U * sizeof(q15_t));
   ::memset(m_gaussianState, 0x00U,  40U * sizeof(q15_t));
   ::memset(m_boxcarState,   0x00U,  30U * sizeof(q15_t));
   ::memset(m_nxdnState,     0x00U, 110U * sizeof(q15_t));
@@ -102,9 +114,13 @@ m_lockout(false)
   m_dcFilter.pCoeffs   = DC_FILTER;
   m_dcFilter.postShift = 0;
 
-  m_rrcFilter.numTaps = RRC_0_2_FILTER_LEN;
+  m_rrc02Filter.numTaps = RRC_0_2_FILTER_LEN;
-  m_rrcFilter.pState  = m_rrcState;
+  m_rrc02Filter.pState  = m_rrc02State;
-  m_rrcFilter.pCoeffs = RRC_0_2_FILTER;
+  m_rrc02Filter.pCoeffs = RRC_0_2_FILTER;
+
+  m_rrc05Filter.numTaps = RRC_0_5_FILTER_LEN;
+  m_rrc05Filter.pState  = m_rrc05State;
+  m_rrc05Filter.pCoeffs = RRC_0_5_FILTER;
 
   m_gaussianFilter.numTaps = GAUSSIAN_0_5_FILTER_LEN;
   m_gaussianFilter.pState  = m_gaussianState;
@@ -131,7 +147,7 @@ void CIO::selfTest()
 {
   bool ledValue = false;
 
-  for (uint8_t i = 0; i < 6; i++) {
+  for (uint8_t i = 0U; i < 6U; i++) {
     ledValue = !ledValue;
 
     // We exclude PTT to avoid trigger the transmitter
@@ -142,119 +158,100 @@ void CIO::selfTest()
     setDMRInt(ledValue);
     setYSFInt(ledValue);
     setP25Int(ledValue);
+#if !defined(USE_ALTERNATE_NXDN_LEDS)
     setNXDNInt(ledValue);
+#endif
+#if !defined(USE_ALTERNATE_M17_LEDS)
+    setM17Int(ledValue);
+#endif
+#if !defined(USE_ALTERNATE_POCSAG_LEDS)
     setPOCSAGInt(ledValue);
+#endif
+#if !defined(USE_ALTERNATE_FM_LEDS)
+    setFMInt(ledValue);
+#endif
 #endif
     delayInt(250);
   }
 
 #if defined(MODE_LEDS)
-  setDStarInt(true);
-  setDMRInt(false);
-  setYSFInt(false);
-  setP25Int(false);
-  setNXDNInt(false);
-  setPOCSAGInt(false);
-
-  delayInt(250);
-
-  setDStarInt(true);
-  setDMRInt(true);
-  setYSFInt(false);
-  setP25Int(false);
-  setNXDNInt(false);
-  setPOCSAGInt(false);
-
-  delayInt(250);
-
-  setDStarInt(true);
-  setDMRInt(true);
-  setYSFInt(true);
-  setP25Int(false);
-  setNXDNInt(false);
-  setPOCSAGInt(false);
-  
-  delayInt(250);
-
-  setDStarInt(true);
-  setDMRInt(true);
-  setYSFInt(true);
-  setP25Int(true);
-  setNXDNInt(false);
-  setPOCSAGInt(false);
-  
-  delayInt(250);
-
-  setDStarInt(true);
-  setDMRInt(true);
-  setYSFInt(true);
-  setP25Int(true);
-  setNXDNInt(true);
-  setPOCSAGInt(false);
-  
-  delayInt(250);
-
-  setDStarInt(true);
-  setDMRInt(true);
-  setYSFInt(true);
-  setP25Int(true);
-  setNXDNInt(true);
-  setPOCSAGInt(true);
-  
-  delayInt(250);
-
-  setDStarInt(true);
-  setDMRInt(true);
-  setYSFInt(true);
-  setP25Int(true);
-  setNXDNInt(true);
-  setPOCSAGInt(false);
-  
-  delayInt(250);
-
-  setDStarInt(true);
-  setDMRInt(true);
-  setYSFInt(true);
-  setP25Int(true);
-  setNXDNInt(false);
-  setPOCSAGInt(false);
-
-  delayInt(250);
-  
-  setDStarInt(true);
-  setDMRInt(true);
-  setYSFInt(true);
-  setP25Int(false);
-  setNXDNInt(false);
-  setPOCSAGInt(false);
-
-  delayInt(250);
-
-  setDStarInt(true);
-  setDMRInt(true);
-  setYSFInt(false);
-  setP25Int(false);
-  setNXDNInt(false);
-  setPOCSAGInt(false);
-
-  delayInt(250);
-  
-  setDStarInt(true);
-  setDMRInt(false);
-  setYSFInt(false);
-  setP25Int(false);
-  setNXDNInt(false);
-  setPOCSAGInt(false);
-
-  delayInt(250);
-
   setDStarInt(false);
   setDMRInt(false);
   setYSFInt(false);
   setP25Int(false);
+#if !defined(USE_ALTERNATE_NXDN_LEDS)
   setNXDNInt(false);
+#endif
+#if !defined(USE_ALTERNATE_M17_LEDS)
+  setM17Int(false);
+#endif
+#if !defined(USE_ALTERNATE_POCSAG_LEDS)
   setPOCSAGInt(false);
 #endif
+#if !defined(USE_ALTERNATE_FM_LEDS)
+  setFMInt(false);
+#endif
+  setDStarInt(true);
+
+  delayInt(250);
+  setDMRInt(true);
+
+  delayInt(250);
+  setYSFInt(true);
+
+  delayInt(250);
+  setP25Int(true);
+
+#if !defined(USE_ALTERNATE_NXDN_LEDS)
+  delayInt(250);
+  setNXDNInt(true);
+#endif
+
+#if !defined(USE_ALTERNATE_M17_LEDS)
+  delayInt(250);
+  setM17Int(true);
+#endif
+
+#if !defined(USE_ALTERNATE_POCSAG_LEDS)
+  delayInt(250);
+  setPOCSAGInt(true);
+#endif
+
+#if !defined(USE_ALTERNATE_FM_LEDS)
+  delayInt(250);
+  setFMInt(true);
+
+  delayInt(250);
+  setFMInt(false);
+#endif
+
+#if !defined(USE_ALTERNATE_POCSAG_LEDS)
+  delayInt(250);
+  setPOCSAGInt(false);
+#endif
+
+#if !defined(USE_ALTERNATE_M17_LEDS)
+  delayInt(250);
+  setM17Int(false);
+#endif
+
+#if !defined(USE_ALTERNATE_NXDN_LEDS)
+  delayInt(250);
+  setNXDNInt(false);
+#endif
+
+  delayInt(250);
+  setP25Int(false);
+
+  delayInt(250);
+  setYSFInt(false);
+
+  delayInt(250);
+  setDMRInt(false);
+
+  delayInt(250);
+  setDStarInt(false);
+#endif
 }
 
 void CIO::start()
@@ -266,7 +263,7 @@ void CIO::start()
 
   m_started = true;
 
-  setMode();
+  setMode(STATE_IDLE);
 }
 
 void CIO::process()
@@ -275,11 +272,10 @@ void CIO::process()
   if (m_started) {
     // Two seconds timeout
     if (m_watchdog >= 48000U) {
-      if (m_modemState == STATE_DSTAR || m_modemState == STATE_DMR || m_modemState == STATE_YSF || m_modemState == STATE_P25 || m_modemState == STATE_NXDN || m_modemState == STATE_POCSAG) {
+      if (m_modemState == STATE_DSTAR || m_modemState == STATE_DMR || m_modemState == STATE_YSF || m_modemState == STATE_P25 || m_modemState == STATE_NXDN || m_modemState == STATE_M17 || m_modemState == STATE_POCSAG) {
         if (m_modemState == STATE_DMR && m_tx)
           dmrTX.setStart(false);
-        m_modemState = STATE_IDLE;
+        setMode(STATE_IDLE);
-        setMode();
       }
 
       m_watchdog = 0U;
@@ -303,9 +299,8 @@ void CIO::process()
     return;
   }
 
-#if defined(USE_COS_AS_LOCKOUT)
+  if (m_useCOSAsLockout)
-  m_lockout = getCOSInt();
+    m_lockout = getCOSInt();
-#endif
 
   // Switch off the transmitter if needed
   if (m_txBuffer.getData() == 0U && m_tx) {
@@ -388,19 +383,43 @@ void CIO::process()
         nxdnRX.samples(NXDNVals, rssi, RX_BLOCK_SIZE);
       }
 
-      if (m_dmrEnable || m_ysfEnable) {
+      if (m_dmrEnable) {
+        q15_t DMRVals[RX_BLOCK_SIZE];
+        ::arm_fir_fast_q15(&m_rrc02Filter, samples, DMRVals, RX_BLOCK_SIZE);
+
+        if (m_duplex)
+          dmrIdleRX.samples(DMRVals, RX_BLOCK_SIZE);
+        else
+          dmrDMORX.samples(DMRVals, rssi, RX_BLOCK_SIZE);
+      }
+
+      if (m_ysfEnable) {
+        q15_t YSFVals[RX_BLOCK_SIZE];
+#if defined(USE_DCBLOCKER)
+        ::arm_fir_fast_q15(&m_rrc02Filter, dcSamples, YSFVals, RX_BLOCK_SIZE);
+#else
+        ::arm_fir_fast_q15(&m_rrc02Filter, samples, YSFVals, RX_BLOCK_SIZE);
+#endif
+        ysfRX.samples(YSFVals, rssi, RX_BLOCK_SIZE);
+      }
+
+      if (m_m17Enable) {
         q15_t RRCVals[RX_BLOCK_SIZE];
-        ::arm_fir_fast_q15(&m_rrcFilter, samples, RRCVals, RX_BLOCK_SIZE);
+#if defined(USE_DCBLOCKER)
+        ::arm_fir_fast_q15(&m_rrc05Filter, dcSamples, RRCVals, RX_BLOCK_SIZE);
+#else
+        ::arm_fir_fast_q15(&m_rrc05Filter, samples, RRCVals, RX_BLOCK_SIZE);
+#endif
+        m17RX.samples(RRCVals, rssi, RX_BLOCK_SIZE);
+      }
 
-        if (m_ysfEnable)
+      if (m_fmEnable) {
-          ysfRX.samples(RRCVals, rssi, RX_BLOCK_SIZE);
+        bool cos = getCOSInt();
-
+#if defined(USE_DCBLOCKER)
-        if (m_dmrEnable) {
+        fm.samples(cos, dcSamples, RX_BLOCK_SIZE);
-          if (m_duplex)
+#else
-            dmrIdleRX.samples(RRCVals, RX_BLOCK_SIZE);
+        fm.samples(cos, samples, RX_BLOCK_SIZE);
-          else
+#endif
-            dmrDMORX.samples(RRCVals, rssi, RX_BLOCK_SIZE);
-        }
       }
     } else if (m_modemState == STATE_DSTAR) {
       if (m_dstarEnable) {
@@ -415,7 +434,7 @@ void CIO::process()
     } else if (m_modemState == STATE_DMR) {
       if (m_dmrEnable) {
         q15_t DMRVals[RX_BLOCK_SIZE];
-        ::arm_fir_fast_q15(&m_rrcFilter, samples, DMRVals, RX_BLOCK_SIZE);
+        ::arm_fir_fast_q15(&m_rrc02Filter, samples, DMRVals, RX_BLOCK_SIZE);
 
         if (m_duplex) {
           // If the transmitter isn't on, use the DMR idle RX to detect the wakeup CSBKs
@@ -431,9 +450,9 @@ void CIO::process()
       if (m_ysfEnable) {
         q15_t YSFVals[RX_BLOCK_SIZE];
 #if defined(USE_DCBLOCKER)
-        ::arm_fir_fast_q15(&m_rrcFilter, dcSamples, YSFVals, RX_BLOCK_SIZE);
+        ::arm_fir_fast_q15(&m_rrc02Filter, dcSamples, YSFVals, RX_BLOCK_SIZE);
 #else
-        ::arm_fir_fast_q15(&m_rrcFilter, samples, YSFVals, RX_BLOCK_SIZE);
+        ::arm_fir_fast_q15(&m_rrc02Filter, samples, YSFVals, RX_BLOCK_SIZE);
 #endif
         ysfRX.samples(YSFVals, rssi, RX_BLOCK_SIZE);
       }
@@ -460,6 +479,23 @@ void CIO::process()
 
         nxdnRX.samples(NXDNVals, rssi, RX_BLOCK_SIZE);
       }
+    } else if (m_modemState == STATE_M17) {
+      if (m_m17Enable) {
+        q15_t M17Vals[RX_BLOCK_SIZE];
+#if defined(USE_DCBLOCKER)
+        ::arm_fir_fast_q15(&m_rrc05Filter, dcSamples, M17Vals, RX_BLOCK_SIZE);
+#else
+        ::arm_fir_fast_q15(&m_rrc05Filter, samples, M17Vals, RX_BLOCK_SIZE);
+#endif
+        m17RX.samples(M17Vals, rssi, RX_BLOCK_SIZE);
+      }
+    } else if (m_modemState == STATE_FM) {
+      bool cos = getCOSInt();
+#if defined(USE_DCBLOCKER)
+      fm.samples(cos, dcSamples, RX_BLOCK_SIZE);
+#else
+      fm.samples(cos, samples, RX_BLOCK_SIZE);
+#endif
     } else if (m_modemState == STATE_DSTARCAL) {
       q15_t GMSKVals[RX_BLOCK_SIZE];
       ::arm_fir_fast_q15(&m_gaussianFilter, samples, GMSKVals, RX_BLOCK_SIZE);
@@ -502,9 +538,15 @@ void CIO::write(MMDVM_STATE mode, q15_t* samples, uint16_t length, const uint8_t
     case STATE_NXDN:
       txLevel = m_nxdnTXLevel;
       break;
+    case STATE_M17:
+      txLevel = m_m17TXLevel;
+      break;
     case STATE_POCSAG:
       txLevel = m_pocsagTXLevel;
       break;
+    case STATE_FM:
+      txLevel = m_fmTXLevel;
+      break;
     default:
       txLevel = m_cwIdTXLevel;
       break;
@@ -544,19 +586,39 @@ void CIO::setADCDetection(bool detect)
   m_detect = detect;
 }
 
-void CIO::setMode()
+void CIO::setMode(MMDVM_STATE state)
 {
+  if (state == m_modemState)
+    return;
+
 #if defined(MODE_LEDS)
-  setDStarInt(m_modemState == STATE_DSTAR);
+  switch (m_modemState) {
-  setDMRInt(m_modemState   == STATE_DMR);
+    case STATE_DSTAR:  setDStarInt(false);  break;
-  setYSFInt(m_modemState   == STATE_YSF);
+    case STATE_DMR:    setDMRInt(false);    break;
-  setP25Int(m_modemState   == STATE_P25);
+    case STATE_YSF:    setYSFInt(false);    break;
-  setNXDNInt(m_modemState  == STATE_NXDN);
+    case STATE_P25:    setP25Int(false);    break;
-  setPOCSAGInt(m_modemState  == STATE_POCSAG);
+    case STATE_NXDN:   setNXDNInt(false);   break;
+    case STATE_M17:    setM17Int(false);    break;
+    case STATE_POCSAG: setPOCSAGInt(false); break;
+    case STATE_FM:     setFMInt(false);     break;
+  }
+
+  switch (state) {
+    case STATE_DSTAR:  setDStarInt(true);  break;
+    case STATE_DMR:    setDMRInt(true);    break;
+    case STATE_YSF:    setYSFInt(true);    break;
+    case STATE_P25:    setP25Int(true);    break;
+    case STATE_NXDN:   setNXDNInt(true);   break;
+    case STATE_M17:    setM17Int(true);    break;
+    case STATE_POCSAG: setPOCSAGInt(true); break;
+    case STATE_FM:     setFMInt(true);     break;
+  }
 #endif
+
+  m_modemState = state;
 }
 
-void CIO::setParameters(bool rxInvert, bool txInvert, bool pttInvert, uint8_t rxLevel, uint8_t cwIdTXLevel, uint8_t dstarTXLevel, uint8_t dmrTXLevel, uint8_t ysfTXLevel, uint8_t p25TXLevel, uint8_t nxdnTXLevel, uint8_t pocsagTXLevel, int16_t txDCOffset, int16_t rxDCOffset)
+void CIO::setParameters(bool rxInvert, bool txInvert, bool pttInvert, uint8_t rxLevel, uint8_t cwIdTXLevel, uint8_t dstarTXLevel, uint8_t dmrTXLevel, uint8_t ysfTXLevel, uint8_t p25TXLevel, uint8_t nxdnTXLevel, uint8_t m17TXLevel, uint8_t pocsagTXLevel, uint8_t fmTXLevel, int16_t txDCOffset, int16_t rxDCOffset, bool useCOSAsLockout)
 {
   m_pttInvert = pttInvert;
 
@@ -567,10 +629,14 @@ void CIO::setParameters(bool rxInvert, bool txInvert, bool pttInvert, uint8_t rx
   m_ysfTXLevel    = q15_t(ysfTXLevel * 128);
   m_p25TXLevel    = q15_t(p25TXLevel * 128);
   m_nxdnTXLevel   = q15_t(nxdnTXLevel * 128);
+  m_m17TXLevel    = q15_t(m17TXLevel * 128);
   m_pocsagTXLevel = q15_t(pocsagTXLevel * 128);
+  m_fmTXLevel     = q15_t(fmTXLevel * 128);
 
   m_rxDCOffset   = DC_OFFSET + rxDCOffset;
   m_txDCOffset   = DC_OFFSET + txDCOffset;
+
+  m_useCOSAsLockout = useCOSAsLockout;
   
   if (rxInvert)
     m_rxLevel = -m_rxLevel;
@@ -581,6 +647,7 @@ void CIO::setParameters(bool rxInvert, bool txInvert, bool pttInvert, uint8_t rx
     m_ysfTXLevel    = -m_ysfTXLevel;
     m_p25TXLevel    = -m_p25TXLevel;
     m_nxdnTXLevel   = -m_nxdnTXLevel;
+    m_m17TXLevel    = -m_m17TXLevel;
     m_pocsagTXLevel = -m_pocsagTXLevel;
   }
 }
@@ -618,4 +685,3 @@ bool CIO::hasLockout() const
 {
   return m_lockout;
 }
-

IO.h

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2015,2016,2017,2018 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2015,2016,2017,2018,2020 by Jonathan Naylor G4KLX
  *
  *   This program is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by
@@ -38,11 +38,11 @@ public:
 
   void setDecode(bool dcd);
   void setADCDetection(bool detect);
-  void setMode();
+  void setMode(MMDVM_STATE state);
   
   void interrupt();
 
-  void setParameters(bool rxInvert, bool txInvert, bool pttInvert, uint8_t rxLevel, uint8_t cwIdTXLevel, uint8_t dstarTXLevel, uint8_t dmrTXLevel, uint8_t ysfTXLevel, uint8_t p25TXLevel, uint8_t nxdnTXLevel, uint8_t pocsagTXLevel, int16_t txDCOffset, int16_t rxDCOffset);
+  void setParameters(bool rxInvert, bool txInvert, bool pttInvert, uint8_t rxLevel, uint8_t cwIdTXLevel, uint8_t dstarTXLevel, uint8_t dmrTXLevel, uint8_t ysfTXLevel, uint8_t p25TXLevel, uint8_t nxdnTXLevel, uint8_t m17TXLevel, uint8_t pocsagTXLevel, uint8_t fmTXLevel, int16_t txDCOffset, int16_t rxDCOffset, bool useCOSAsLockout);
 
   void getOverflow(bool& adcOverflow, bool& dacOverflow);
 
@@ -66,14 +66,16 @@ private:
   arm_biquad_casd_df1_inst_q31 m_dcFilter;
   q31_t                        m_dcState[4];
 
-  arm_fir_instance_q15 m_rrcFilter;
+  arm_fir_instance_q15 m_rrc02Filter;
+  arm_fir_instance_q15 m_rrc05Filter;
   arm_fir_instance_q15 m_gaussianFilter;
   arm_fir_instance_q15 m_boxcarFilter;
   arm_fir_instance_q15 m_nxdnFilter;
   arm_fir_instance_q15 m_nxdnISincFilter;
-  q15_t                m_rrcState[70U];           // NoTaps + BlockSize - 1, 42 + 20 - 1 plus some spare
+  q15_t                m_rrc02State[70U];         // NoTaps + BlockSize - 1, 42 + 20 - 1 plus some spare
+  q15_t                m_rrc05State[70U];         // NoTaps + BlockSize - 1, 42 + 20 - 1 plus some spare
   q15_t                m_gaussianState[40U];      // NoTaps + BlockSize - 1, 12 + 20 - 1 plus some spare
-  q15_t                m_boxcarState[30U];        // NoTaps + BlockSize - 1, 6 + 20 - 1 plus some spare
+  q15_t                m_boxcarState[30U];        // NoTaps + BlockSize - 1,  6 + 20 - 1 plus some spare
   q15_t                m_nxdnState[110U];         // NoTaps + BlockSize - 1, 82 + 20 - 1 plus some spare
   q15_t                m_nxdnISincState[60U];     // NoTaps + BlockSize - 1, 32 + 20 - 1 plus some spare
 
@@ -85,11 +87,15 @@ private:
   q15_t                m_ysfTXLevel;
   q15_t                m_p25TXLevel;
   q15_t                m_nxdnTXLevel;
+  q15_t                m_m17TXLevel;
   q15_t                m_pocsagTXLevel;
+  q15_t                m_fmTXLevel;
 
   uint16_t             m_rxDCOffset;
   uint16_t             m_txDCOffset;
 
+  bool                 m_useCOSAsLockout;
+
   uint32_t             m_ledCount;
   bool                 m_ledValue;
 
@@ -118,9 +124,10 @@ private:
   void setP25Int(bool on);
   void setNXDNInt(bool on);
   void setPOCSAGInt(bool on);
+  void setM17Int(bool on);
+  void setFMInt(bool on);
   
   void delayInt(unsigned int dly);
 };
 
 #endif
-

IODue.cpp

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2015,2016,2017,2018 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2015,2016,2017,2018,2020 by Jonathan Naylor G4KLX
  *   Copyright (C) 2015 by Jim Mclaughlin KI6ZUM
  *   Copyright (C) 2016 by Colin Durbridge G4EML
  *
@@ -35,6 +35,7 @@
 #define PIN_P25                19
 #define PIN_NXDN               20
 #define PIN_POCSAG             4
+#define PIN_FM                 5
 #define ADC_CHER_Chan          (1<<7)                 // ADC on Due pin A0  - Due AD7 - (1 << 7)
 #define ADC_ISR_EOC_Chan       ADC_ISR_EOC7
 #define ADC_CDR_Chan           7
@@ -50,6 +51,7 @@
 #define PIN_P25                6
 #define PIN_NXDN               5
 #define PIN_POCSAG             4
+#define PIN_FM                 3
 #define ADC_CHER_Chan          (1<<13)                // ADC on Due pin A11 - Due AD13 - (1 << 13)
 #define ADC_ISR_EOC_Chan       ADC_ISR_EOC13
 #define ADC_CDR_Chan           13
@@ -67,6 +69,7 @@
 #define PIN_P25                6
 #define PIN_NXDN               5
 #define PIN_POCSAG             4
+#define PIN_FM                 3
 #define ADC_CHER_Chan          (1<<7)                 // ADC on Due pin A0  - Due AD7 - (1 << 7)
 #define ADC_ISR_EOC_Chan       ADC_ISR_EOC7
 #define ADC_CDR_Chan           7
@@ -104,9 +107,15 @@ void CIO::initInt()
 #if !defined(USE_ALTERNATE_NXDN_LEDS)
   pinMode(PIN_NXDN,   OUTPUT);
 #endif
+#if !defined(USE_ALTERNATE_M17_LEDS)
+  pinMode(PIN_M17,    OUTPUT);
+#endif
 #if !defined(USE_ALTERNATE_POCSAG_LEDS)
   pinMode(PIN_POCSAG, OUTPUT);
 #endif
+#if !defined(USE_ALTERNATE_POCSAG_LEDS)
+  pinMode(PIN_FM,     OUTPUT);
+#endif
 #endif
 }
 
@@ -248,6 +257,16 @@ void CIO::setNXDNInt(bool on)
 #endif
 }
 
+void CIO::setM17Int(bool on)
+{
+#if defined(USE_ALTERNATE_M17_LEDS)
+  digitalWrite(PIN_DSTAR, on ? HIGH : LOW);
+  digitalWrite(PIN_P25,   on ? HIGH : LOW);
+#else
+  digitalWrite(PIN_M17, on ? HIGH : LOW);
+#endif
+}
+
 void CIO::setPOCSAGInt(bool on)
 {
 #if defined(USE_ALTERNATE_POCSAG_LEDS)
@@ -258,10 +277,19 @@ void CIO::setPOCSAGInt(bool on)
 #endif
 }
 
+void CIO::setFMInt(bool on)
+{
+#if defined(USE_ALTERNATE_FM_LEDS)
+  digitalWrite(PIN_DSTAR, on ? HIGH : LOW);
+  digitalWrite(PIN_YSF,   on ? HIGH : LOW);
+#else
+  digitalWrite(PIN_FM, on ? HIGH : LOW);
+#endif
+}
+
 void CIO::delayInt(unsigned int dly)
 {
   delay(dly);
 }
 
 #endif
-

IOPins.h

@@ -0,0 +1,73 @@
+/*
+ *   Copyright (C) 2019,2020 by BG5HHP
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _IO_PINS_H
+#define _IO_PINS_H
+
+#if !defined(CONFIG_H)
+#error "Requires Config.h to be included first!"
+#endif
+
+#if defined(STM32F4_RPT_HAT_TGO)
+    #include "pins/pins_f4_rpt_tgo.h"
+
+#elif defined(STM32F4_DISCOVERY)
+    #include "pins/pins_f4_discovery.h"
+
+#elif defined(STM32F4_PI)
+    #include "pins/pins_f4_pi.h"
+
+#elif defined(STM32F722_PI)
+    #include "pins/pins_f7_pi.h"
+
+#elif defined(STM32F4_F4M)
+    #include "pins/pins_f4_f4m.h"
+
+#elif defined(STM32F722_F7M)
+    #include "pins/pins_f7_f7m.h"
+
+#elif defined(STM32F722_RPT_HAT)
+    #include "pins/pins_f7_rpt_hat.h"
+
+#elif defined(STM32F4_NUCLEO)
+    #if defined(STM32F4_NUCLEO_MORPHO_HEADER)
+        #include "pins/pins_f4_nucleo_morpho.h"
+    #elif defined(STM32F4_NUCLEO_ARDUINO_HEADER)
+        #include "pins/pins_f4_nucleo_arduino.h"
+    #else
+        #error "Either STM32F4_NUCLEO_MORPHO_HEADER or STM32F4_NUCLEO_ARDUINO_HEADER need to be defined"
+    #endif
+
+#elif defined(STM32F7_NUCLEO)
+    #include "pins/pins_f7_nucleo.h"
+
+#elif defined(STM32F4_DVM)
+    #include "pins/pins_f4_stm32dvm_v3.h"
+
+#elif defined(DRCC_DVM_NQF)
+    #include "pins/pins_f4_drcc_nqf.h"
+
+#elif defined(STM32F4_EDA_405) || defined(STM32F4_EDA_446)
+    #include "pins/pins_f4_stm32eda.h"
+
+#else
+    #error "A valid board type macro need to be defined."
+
+#endif
+
+#endif  //#ifndef _IO_PINS_H

IOSTM_CMSIS.cpp

@@ -1,7 +1,7 @@
 /*
  *   Copyright (C) 2016 by Jim McLaughlin KI6ZUM
  *   Copyright (C) 2016, 2017 by Andy Uribe CA6JAU
- *   Copyright (C) 2017,2018 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2017,2018,2020 by Jonathan Naylor G4KLX
  *   Copyright (C) 2017 by Wojciech Krutnik N0CALL
  *
  *   This program is free software; you can redistribute it and/or modify
@@ -225,6 +225,9 @@ static inline void GPIOInit()
 #if !defined(USE_ALTERNATE_NXDN_LEDS)
   GPIOConfigPin(PORT_NXDN,   PIN_NXDN,   GPIO_CRL_MODE0_1);
 #endif
+#if !defined(USE_ALTERNATE_M17_LEDS)
+  GPIOConfigPin(PORT_M17,    PIN_M17,    GPIO_CRL_MODE0_1);
+#endif
 #if !defined(USE_ALTERNATE_POCSAG_LEDS)
   GPIOConfigPin(PORT_POCSAG, PIN_POCSAG, GPIO_CRL_MODE0_1);
 #endif
@@ -450,6 +453,16 @@ void CIO::setNXDNInt(bool on)
 #endif
 }
 
+void CIO::setM17Int(bool on)
+{
+#if defined(USE_ALTERNATE_M17_LEDS)
+  BB_DSTAR = !!on;
+  BB_P25   = !!on;
+#else
+  BB_M17 = !!on;
+#endif
+}
+
 void CIO::setPOCSAGInt(bool on)
 {
 #if defined(USE_ALTERNATE_POCSAG_LEDS)
@@ -460,6 +473,14 @@ void CIO::setPOCSAGInt(bool on)
 #endif
 }
 
+void CIO::setFMInt(bool on)
+{
+#if defined(USE_ALTERNATE_FM_LEDS)
+  BB_DSTAR = !!on;
+  BB_YSF   = !!on;
+#endif
+}
+
 void CIO::delayInt(unsigned int dly)
 {
   delay(dly);

IOTeensy.cpp

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2016,2017,2018 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2016,2017,2018,2020 by Jonathan Naylor G4KLX
  *
  *   This program is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by
@@ -37,9 +37,11 @@
 #if defined(__MK20DX256__)
 #define PIN_NXDN               2
 #define PIN_POCSAG             3
+#define PIN_FM                 4
 #else
 #define PIN_NXDN               24
 #define PIN_POCSAG             25
+#define PIN_FM                 26
 #endif
 #define PIN_ADC                5        // A0,  Pin 14
 #define PIN_RSSI               4        // Teensy 3.5/3.6, A16, Pin 35. Teensy 3.1/3.2, A17, Pin 28
@@ -73,9 +75,15 @@ void CIO::initInt()
 #if !defined(USE_ALTERNATE_NXDN_LEDS)
   pinMode(PIN_NXDN,   OUTPUT);
 #endif
+#if !defined(USE_ALTERNATE_M17_LEDS)
+  pinMode(PIN_M17,    OUTPUT);
+#endif
 #if !defined(USE_ALTERNATE_POCSAG_LEDS)
   pinMode(PIN_POCSAG, OUTPUT);
 #endif
+#if !defined(USE_ALTERNATE_FM_LEDS)
+  pinMode(PIN_FM,     OUTPUT);
+#endif
 #endif
 }
 
@@ -233,6 +241,16 @@ void CIO::setNXDNInt(bool on)
 #endif
 }
 
+void CIO::setM17Int(bool on)
+{
+#if defined(USE_ALTERNATE_M17_LEDS)
+  digitalWrite(PIN_DSTAR, on ? HIGH : LOW);
+  digitalWrite(PIN_P25,   on ? HIGH : LOW);
+#else
+  digitalWrite(PIN_M17, on ? HIGH : LOW);
+#endif
+}
+
 void CIO::setPOCSAGInt(bool on)
 {
 #if defined(USE_ALTERNATE_POCSAG_LEDS)
@@ -243,6 +261,16 @@ void CIO::setPOCSAGInt(bool on)
 #endif
 }
 
+void CIO::setFMInt(bool on)
+{
+#if defined(USE_ALTERNATE_FM_LEDS)
+  digitalWrite(PIN_DSTAR, on ? HIGH : LOW);
+  digitalWrite(PIN_YSF,   on ? HIGH : LOW);
+#else
+  digitalWrite(PIN_FM, on ? HIGH : LOW);
+#endif
+}
+
 void CIO::delayInt(unsigned int dly)
 {
   delay(dly);

M17Defines.h

@@ -0,0 +1,47 @@
+/*
+ *   Copyright (C) 2016,2017,2018,2020 by Jonathan Naylor G4KLX
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if !defined(M17DEFINES_H)
+#define  M17DEFINES_H
+
+const unsigned int M17_RADIO_SYMBOL_LENGTH = 5U;      // At 24 kHz sample rate
+
+const unsigned int M17_FRAME_LENGTH_BITS    = 384U;
+const unsigned int M17_FRAME_LENGTH_BYTES   = M17_FRAME_LENGTH_BITS / 8U;
+const unsigned int M17_FRAME_LENGTH_SYMBOLS = M17_FRAME_LENGTH_BITS / 2U;
+const unsigned int M17_FRAME_LENGTH_SAMPLES = M17_FRAME_LENGTH_SYMBOLS * M17_RADIO_SYMBOL_LENGTH;
+
+const unsigned int M17_SYNC_LENGTH_BITS    = 16U;
+const unsigned int M17_SYNC_LENGTH_SYMBOLS = M17_SYNC_LENGTH_BITS / 2U;
+const unsigned int M17_SYNC_LENGTH_SAMPLES = M17_SYNC_LENGTH_SYMBOLS * M17_RADIO_SYMBOL_LENGTH;
+
+const uint8_t M17_SYNC_BYTES[]      = {0x32U, 0x43U};
+const uint8_t M17_SYNC_BYTES_LENGTH = 2U;
+
+const uint16_t M17_SYNC_BITS      = 0x3243U;
+
+// 3     2      4      3
+// 00 11 00 10  01 00  00 11
+// +1 -3 +1 -1  +3 +1  +1 -3
+
+const int8_t M17_SYNC_SYMBOLS_VALUES[] = {+1, -3, +1, -1, +3, +1, +1, -3};
+
+const uint8_t M17_SYNC_SYMBOLS = 0xAEU;
+
+#endif
+

M17RX.cpp

@@ -0,0 +1,404 @@
+/*
+ *   Copyright (C) 2009-2017,2020 by Jonathan Naylor G4KLX
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "Config.h"
+#include "Globals.h"
+#include "M17RX.h"
+#include "Utils.h"
+
+const q15_t SCALING_FACTOR = 18750;      // Q15(0.55)
+
+const uint8_t MAX_SYNC_BIT_START_ERRS = 2U;
+const uint8_t MAX_SYNC_BIT_RUN_ERRS   = 4U;
+
+const uint8_t MAX_SYNC_SYMBOLS_ERRS = 3U;
+
+const uint8_t BIT_MASK_TABLE[] = {0x80U, 0x40U, 0x20U, 0x10U, 0x08U, 0x04U, 0x02U, 0x01U};
+
+#define WRITE_BIT1(p,i,b) p[(i)>>3] = (b) ? (p[(i)>>3] | BIT_MASK_TABLE[(i)&7]) : (p[(i)>>3] & ~BIT_MASK_TABLE[(i)&7])
+
+const uint8_t NOAVEPTR = 99U;
+
+const uint16_t NOENDPTR = 9999U;
+
+const unsigned int MAX_SYNC_FRAMES = 1U + 1U;
+
+CM17RX::CM17RX() :
+m_state(M17RXS_NONE),
+m_bitBuffer(),
+m_buffer(),
+m_bitPtr(0U),
+m_dataPtr(0U),
+m_startPtr(NOENDPTR),
+m_endPtr(NOENDPTR),
+m_syncPtr(NOENDPTR),
+m_minSyncPtr(NOENDPTR),
+m_maxSyncPtr(NOENDPTR),
+m_maxCorr(0),
+m_lostCount(0U),
+m_countdown(0U),
+m_centre(),
+m_centreVal(0),
+m_threshold(),
+m_thresholdVal(0),
+m_averagePtr(NOAVEPTR),
+m_rssiAccum(0U),
+m_rssiCount(0U)
+{
+}
+
+void CM17RX::reset()
+{
+  m_state        = M17RXS_NONE;
+  m_dataPtr      = 0U;
+  m_bitPtr       = 0U;
+  m_maxCorr      = 0;
+  m_averagePtr   = NOAVEPTR;
+  m_startPtr     = NOENDPTR;
+  m_endPtr       = NOENDPTR;
+  m_syncPtr      = NOENDPTR;
+  m_minSyncPtr   = NOENDPTR;
+  m_maxSyncPtr   = NOENDPTR;
+  m_centreVal    = 0;
+  m_thresholdVal = 0;
+  m_lostCount    = 0U;
+  m_countdown    = 0U;
+  m_rssiAccum    = 0U;
+  m_rssiCount    = 0U;
+}
+
+void CM17RX::samples(const q15_t* samples, uint16_t* rssi, uint8_t length)
+{
+  for (uint8_t i = 0U; i < length; i++) {
+    q15_t sample = samples[i];
+
+    m_rssiAccum += rssi[i];
+    m_rssiCount++;
+
+    m_bitBuffer[m_bitPtr] <<= 1;
+    if (sample < 0)
+      m_bitBuffer[m_bitPtr] |= 0x01U;
+
+    m_buffer[m_dataPtr] = sample;
+
+    switch (m_state) {
+    case M17RXS_DATA:
+      processData(sample);
+      break;
+    default:
+      processNone(sample);
+      break;
+    }
+
+    m_dataPtr++;
+    if (m_dataPtr >= M17_FRAME_LENGTH_SAMPLES)
+      m_dataPtr = 0U;
+
+    m_bitPtr++;
+    if (m_bitPtr >= M17_RADIO_SYMBOL_LENGTH)
+      m_bitPtr = 0U;
+  }
+}
+
+void CM17RX::processNone(q15_t sample)
+{
+  bool ret = correlateSync();
+  if (ret) {
+    // On the first sync, start the countdown to the state change
+    if (m_countdown == 0U) {
+      m_rssiAccum = 0U;
+      m_rssiCount = 0U;
+
+      io.setDecode(true);
+      io.setADCDetection(true);
+
+      m_averagePtr = NOAVEPTR;
+
+      m_countdown = 5U;
+    }
+  }
+
+  if (m_countdown > 0U)
+    m_countdown--;
+
+  if (m_countdown == 1U) {
+    m_minSyncPtr = m_syncPtr + M17_FRAME_LENGTH_SAMPLES - 1U;
+    if (m_minSyncPtr >= M17_FRAME_LENGTH_SAMPLES)
+      m_minSyncPtr -= M17_FRAME_LENGTH_SAMPLES;
+
+    m_maxSyncPtr = m_syncPtr + 1U;
+    if (m_maxSyncPtr >= M17_FRAME_LENGTH_SAMPLES)
+      m_maxSyncPtr -= M17_FRAME_LENGTH_SAMPLES;
+
+    m_state      = M17RXS_DATA;
+    m_countdown  = 0U;
+  }
+}
+
+void CM17RX::processData(q15_t sample)
+{
+  if (m_minSyncPtr < m_maxSyncPtr) {
+    if (m_dataPtr >= m_minSyncPtr && m_dataPtr <= m_maxSyncPtr)
+      correlateSync();
+  } else {
+    if (m_dataPtr >= m_minSyncPtr || m_dataPtr <= m_maxSyncPtr)
+      correlateSync();
+  }
+
+  if (m_dataPtr == m_endPtr) {
+    // Only update the centre and threshold if they are from a good sync
+    if (m_lostCount == MAX_SYNC_FRAMES) {
+      m_minSyncPtr = m_syncPtr + M17_FRAME_LENGTH_SAMPLES - 1U;
+      if (m_minSyncPtr >= M17_FRAME_LENGTH_SAMPLES)
+        m_minSyncPtr -= M17_FRAME_LENGTH_SAMPLES;
+
+      m_maxSyncPtr = m_syncPtr + 1U;
+      if (m_maxSyncPtr >= M17_FRAME_LENGTH_SAMPLES)
+        m_maxSyncPtr -= M17_FRAME_LENGTH_SAMPLES;
+    }
+
+    calculateLevels(m_startPtr, M17_FRAME_LENGTH_SYMBOLS);
+
+    DEBUG4("M17RX: sync found pos/centre/threshold", m_syncPtr, m_centreVal, m_thresholdVal);
+
+    uint8_t frame[M17_FRAME_LENGTH_BYTES + 3U];
+    samplesToBits(m_startPtr, M17_FRAME_LENGTH_SYMBOLS, frame, 8U, m_centreVal, m_thresholdVal);
+
+    // We've not seen a data sync for too long, signal RXLOST and change to RX_NONE
+    m_lostCount--;
+    if (m_lostCount == 0U) {
+      DEBUG1("M17RX: sync timed out, lost lock");
+
+      io.setDecode(false);
+      io.setADCDetection(false);
+
+      serial.writeM17Lost();
+
+      m_state      = M17RXS_NONE;
+      m_endPtr     = NOENDPTR;
+      m_averagePtr = NOAVEPTR;
+      m_countdown  = 0U;
+      m_maxCorr    = 0;
+    } else {
+      frame[0U] = m_lostCount == (MAX_SYNC_FRAMES - 1U) ? 0x01U : 0x00U;
+      writeRSSIData(frame);
+      m_maxCorr = 0;
+    }
+  }
+}
+
+bool CM17RX::correlateSync()
+{
+  if (countBits8(m_bitBuffer[m_bitPtr] ^ M17_SYNC_SYMBOLS) <= MAX_SYNC_SYMBOLS_ERRS) {
+    uint16_t ptr = m_dataPtr + M17_FRAME_LENGTH_SAMPLES - M17_SYNC_LENGTH_SAMPLES + M17_RADIO_SYMBOL_LENGTH;
+    if (ptr >= M17_FRAME_LENGTH_SAMPLES)
+      ptr -= M17_FRAME_LENGTH_SAMPLES;
+
+    q31_t corr = 0;
+    q15_t min =  16000;
+    q15_t max = -16000;
+
+    for (uint8_t i = 0U; i < M17_SYNC_LENGTH_SYMBOLS; i++) {
+      q15_t val = m_buffer[ptr];
+
+      if (val > max)
+        max = val;
+      if (val < min)
+        min = val;
+
+      switch (M17_SYNC_SYMBOLS_VALUES[i]) {
+      case +3:
+        corr -= (val + val + val);
+        break;
+      case +1:
+        corr -= val;
+        break;
+      case -1:
+        corr += val;
+        break;
+      default:  // -3
+        corr += (val + val + val);
+        break;
+      }
+
+      ptr += M17_RADIO_SYMBOL_LENGTH;
+      if (ptr >= M17_FRAME_LENGTH_SAMPLES)
+        ptr -= M17_FRAME_LENGTH_SAMPLES;
+    }
+
+    if (corr > m_maxCorr) {
+      if (m_averagePtr == NOAVEPTR) {
+        m_centreVal = (max + min) >> 1;
+
+        q31_t v1 = (max - m_centreVal) * SCALING_FACTOR;
+        m_thresholdVal = q15_t(v1 >> 15);
+      }
+
+      uint16_t startPtr = m_dataPtr + M17_FRAME_LENGTH_SAMPLES - M17_SYNC_LENGTH_SAMPLES + M17_RADIO_SYMBOL_LENGTH;
+      if (startPtr >= M17_FRAME_LENGTH_SAMPLES)
+        startPtr -= M17_FRAME_LENGTH_SAMPLES;
+
+      uint8_t sync[M17_SYNC_BYTES_LENGTH];
+      samplesToBits(startPtr, M17_SYNC_LENGTH_SYMBOLS, sync, 0U, m_centreVal, m_thresholdVal);
+
+      uint8_t maxErrs;
+      if (m_state == M17RXS_NONE)
+        maxErrs = MAX_SYNC_BIT_START_ERRS;
+      else
+        maxErrs = MAX_SYNC_BIT_RUN_ERRS;
+
+      uint8_t errs = 0U;
+      for (uint8_t i = 0U; i < M17_SYNC_BYTES_LENGTH; i++)
+        errs += countBits8(sync[i] ^ M17_SYNC_BYTES[i]);
+
+      if (errs <= maxErrs) {
+        m_maxCorr   = corr;
+        m_lostCount = MAX_SYNC_FRAMES;
+        m_syncPtr   = m_dataPtr;
+
+        m_startPtr = startPtr;
+
+        m_endPtr = m_dataPtr + M17_FRAME_LENGTH_SAMPLES - M17_SYNC_LENGTH_SAMPLES - 1U;
+        if (m_endPtr >= M17_FRAME_LENGTH_SAMPLES)
+          m_endPtr -= M17_FRAME_LENGTH_SAMPLES;
+
+        return true;
+      }
+    }
+  }
+
+  return false;
+}
+
+void CM17RX::calculateLevels(uint16_t start, uint16_t count)
+{
+  q15_t maxPos = -16000;
+  q15_t minPos =  16000;
+  q15_t maxNeg =  16000;
+  q15_t minNeg = -16000;
+
+  for (uint16_t i = 0U; i < count; i++) {
+    q15_t sample = m_buffer[start];
+
+    if (sample > 0) {
+      if (sample > maxPos)
+        maxPos = sample;
+      if (sample < minPos)
+        minPos = sample;
+    } else {
+      if (sample < maxNeg)
+        maxNeg = sample;
+      if (sample > minNeg)
+        minNeg = sample;
+    }
+
+    start += M17_RADIO_SYMBOL_LENGTH;
+    if (start >= M17_FRAME_LENGTH_SAMPLES)
+      start -= M17_FRAME_LENGTH_SAMPLES;
+  }
+
+  q15_t posThresh = (maxPos + minPos) >> 1;
+  q15_t negThresh = (maxNeg + minNeg) >> 1;
+
+  q15_t centre = (posThresh + negThresh) >> 1;
+
+  q15_t threshold = posThresh - centre;
+
+  DEBUG5("M17RX: pos/neg/centre/threshold", posThresh, negThresh, centre, threshold);
+
+  if (m_averagePtr == NOAVEPTR) {
+    for (uint8_t i = 0U; i < 16U; i++) {
+      m_centre[i] = centre;
+      m_threshold[i] = threshold;
+    }
+
+    m_averagePtr = 0U;
+  } else {
+    m_centre[m_averagePtr] = centre;
+    m_threshold[m_averagePtr] = threshold;
+
+    m_averagePtr++;
+    if (m_averagePtr >= 16U)
+      m_averagePtr = 0U;
+  }
+
+  m_centreVal = 0;
+  m_thresholdVal = 0;
+
+  for (uint8_t i = 0U; i < 16U; i++) {
+    m_centreVal += m_centre[i];
+    m_thresholdVal += m_threshold[i];
+  }
+
+  m_centreVal >>= 4;
+  m_thresholdVal >>= 4;
+}
+
+void CM17RX::samplesToBits(uint16_t start, uint16_t count, uint8_t* buffer, uint16_t offset, q15_t centre, q15_t threshold)
+{
+  for (uint16_t i = 0U; i < count; i++) {
+    q15_t sample = m_buffer[start] - centre;
+
+    if (sample < -threshold) {
+      WRITE_BIT1(buffer, offset, false);
+      offset++;
+      WRITE_BIT1(buffer, offset, true);
+      offset++;
+    } else if (sample < 0) {
+      WRITE_BIT1(buffer, offset, false);
+      offset++;
+      WRITE_BIT1(buffer, offset, false);
+      offset++;
+    } else if (sample < threshold) {
+      WRITE_BIT1(buffer, offset, true);
+      offset++;
+      WRITE_BIT1(buffer, offset, false);
+      offset++;
+    } else {
+      WRITE_BIT1(buffer, offset, true);
+      offset++;
+      WRITE_BIT1(buffer, offset, true);
+      offset++;
+    }
+
+    start += M17_RADIO_SYMBOL_LENGTH;
+    if (start >= M17_FRAME_LENGTH_SAMPLES)
+      start -= M17_FRAME_LENGTH_SAMPLES;
+  }
+}
+
+void CM17RX::writeRSSIData(uint8_t* data)
+{
+#if defined(SEND_RSSI_DATA)
+  if (m_rssiCount > 0U) {
+    uint16_t rssi = m_rssiAccum / m_rssiCount;
+
+    data[121U] = (rssi >> 8) & 0xFFU;
+    data[122U] = (rssi >> 0) & 0xFFU;
+
+    serial.writeM17Data(data, M17_FRAME_LENGTH_BYTES + 3U);
+  } else {
+    serial.writeM17Data(data, M17_FRAME_LENGTH_BYTES + 1U);
+  }
+#else
+  serial.writeM17Data(data, M17_FRAME_LENGTH_BYTES + 1U);
+#endif
+
+  m_rssiAccum = 0U;
+  m_rssiCount = 0U;
+}

M17RX.h

@@ -0,0 +1,69 @@
+/*
+ *   Copyright (C) 2015,2016,2017,2020 by Jonathan Naylor G4KLX
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if !defined(M17RX_H)
+#define  M17RX_H
+
+#include "Config.h"
+#include "M17Defines.h"
+
+enum M17RX_STATE {
+  M17RXS_NONE,
+  M17RXS_DATA
+};
+
+class CM17RX {
+public:
+  CM17RX();
+
+  void samples(const q15_t* samples, uint16_t* rssi, uint8_t length);
+
+  void reset();
+
+private:
+  M17RX_STATE m_state;
+  uint8_t     m_bitBuffer[M17_RADIO_SYMBOL_LENGTH];
+  q15_t       m_buffer[M17_FRAME_LENGTH_SAMPLES];
+  uint16_t    m_bitPtr;
+  uint16_t    m_dataPtr;
+  uint16_t    m_startPtr;
+  uint16_t    m_endPtr;
+  uint16_t    m_syncPtr;
+  uint16_t    m_minSyncPtr;
+  uint16_t    m_maxSyncPtr;
+  q31_t       m_maxCorr;
+  uint16_t    m_lostCount;
+  uint8_t     m_countdown;
+  q15_t       m_centre[16U];
+  q15_t       m_centreVal;
+  q15_t       m_threshold[16U];
+  q15_t       m_thresholdVal;
+  uint8_t     m_averagePtr;
+  uint32_t    m_rssiAccum;
+  uint16_t    m_rssiCount;
+
+  void processNone(q15_t sample);
+  void processData(q15_t sample);
+  bool correlateSync();
+  void calculateLevels(uint16_t start, uint16_t count);
+  void samplesToBits(uint16_t start, uint16_t count, uint8_t* buffer, uint16_t offset, q15_t centre, q15_t threshold);
+  void writeRSSIData(uint8_t* data);
+};
+
+#endif
+

M17TX.cpp

@@ -0,0 +1,183 @@
+/*
+ *   Copyright (C) 2009-2018,2020 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2017 by Andy Uribe CA6JAU
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "Config.h"
+#include "Globals.h"
+#include "M17TX.h"
+
+#include "M17Defines.h"
+
+// Generated using rcosdesign(0.5, 8, 5, 'sqrt') in MATLAB
+static q15_t RRC_0_5_FILTER[] = {0, 0, 0, 0, -290, -174, 142, 432, 438, 90, -387, -561, -155, 658, 1225, 767,
+				  -980, -3326, -4648, -3062, 2527, 11552, 21705, 29724, 32767, 29724, 21705,
+				  11552, 2527, -3062, -4648, -3326, -980, 767, 1225, 658, -155, -561, -387, 90,
+				  438, 432, 142, -174, -290}; // numTaps = 45, L = 5
+const uint16_t RRC_0_5_FILTER_PHASE_LEN = 9U; // phaseLength = numTaps/L
+
+const q15_t M17_LEVELA =  1683;
+const q15_t M17_LEVELB =  561;
+const q15_t M17_LEVELC = -561;
+const q15_t M17_LEVELD = -1683;
+
+const uint8_t M17_START_SYNC = 0x77U;
+const uint8_t M17_END_SYNC   = 0xFFU;
+const uint8_t M17_HANG       = 0x00U;
+
+CM17TX::CM17TX() :
+m_buffer(TX_BUFFER_LEN),
+m_modFilter(),
+m_modState(),
+m_poBuffer(),
+m_poLen(0U),
+m_poPtr(0U),
+m_txDelay(240U),      // 200ms
+m_txHang(4800U),      // 4s
+m_txCount(0U)
+{
+  ::memset(m_modState, 0x00U, 16U * sizeof(q15_t));
+
+  m_modFilter.L           = M17_RADIO_SYMBOL_LENGTH;
+  m_modFilter.phaseLength = RRC_0_5_FILTER_PHASE_LEN;
+  m_modFilter.pCoeffs     = RRC_0_5_FILTER;
+  m_modFilter.pState      = m_modState;
+}
+
+void CM17TX::process()
+{
+  // If we have M17 data to transmit, do so.
+  if (m_poLen == 0U && m_buffer.getData() > 0U) {
+    if (!m_tx) {
+      for (uint16_t i = 0U; i < m_txDelay; i++)
+        m_poBuffer[m_poLen++] = M17_START_SYNC;
+    } else {
+      for (uint8_t i = 0U; i < M17_FRAME_LENGTH_BYTES; i++) {
+        uint8_t c = m_buffer.get();
+        m_poBuffer[m_poLen++] = c;
+      }
+    }
+
+    m_poPtr = 0U;
+  }
+
+  if (m_poLen > 0U) {
+    // Transmit M17 data.
+    uint16_t space = io.getSpace();
+
+    while (space > (4U * M17_RADIO_SYMBOL_LENGTH)) {
+      uint8_t c = m_poBuffer[m_poPtr++];
+      writeByte(c);
+
+      // Reduce space and reset the hang timer.
+      space -= 4U * M17_RADIO_SYMBOL_LENGTH;
+      if (m_duplex)
+        m_txCount = m_txHang;
+
+      if (m_poPtr >= m_poLen) {
+        m_poPtr = 0U;
+        m_poLen = 0U;
+        return;
+      }
+    }
+  } else if (m_txCount > 0U) {
+    // Transmit silence until the hang timer has expired.
+    uint16_t space = io.getSpace();
+
+    while (space > (4U * M17_RADIO_SYMBOL_LENGTH)) {
+      writeSilence();
+
+      space -= 4U * M17_RADIO_SYMBOL_LENGTH;
+      m_txCount--;
+
+      if (m_txCount == 0U)
+        return;
+    }
+  }
+}
+
+uint8_t CM17TX::writeData(const uint8_t* data, uint8_t length)
+{
+  if (length != (M17_FRAME_LENGTH_BYTES + 1U))
+    return 4U;
+
+  uint16_t space = m_buffer.getSpace();
+  if (space < M17_FRAME_LENGTH_BYTES)
+    return 5U;
+
+  for (uint8_t i = 0U; i < M17_FRAME_LENGTH_BYTES; i++)
+    m_buffer.put(data[i + 1U]);
+
+  return 0U;
+}
+
+void CM17TX::writeByte(uint8_t c)
+{
+  q15_t inBuffer[4U];
+  q15_t outBuffer[M17_RADIO_SYMBOL_LENGTH * 4U];
+
+  const uint8_t MASK = 0xC0U;
+
+  for (uint8_t i = 0U; i < 4U; i++, c <<= 2) {
+    switch (c & MASK) {
+      case 0xC0U:
+        inBuffer[i] = M17_LEVELA;
+        break;
+      case 0x80U:
+        inBuffer[i] = M17_LEVELB;
+        break;
+      case 0x00U:
+        inBuffer[i] = M17_LEVELC;
+        break;
+      default:
+        inBuffer[i] = M17_LEVELD;
+        break;
+    }
+  }
+
+  ::arm_fir_interpolate_q15(&m_modFilter, inBuffer, outBuffer, 4U);
+
+  io.write(STATE_M17, outBuffer, M17_RADIO_SYMBOL_LENGTH * 4U);
+}
+
+void CM17TX::writeSilence()
+{
+  q15_t inBuffer[4U] = {0x00U, 0x00U, 0x00U, 0x00U};
+  q15_t outBuffer[M17_RADIO_SYMBOL_LENGTH * 4U];
+
+  ::arm_fir_interpolate_q15(&m_modFilter, inBuffer, outBuffer, 4U);
+
+  io.write(STATE_M17, outBuffer, M17_RADIO_SYMBOL_LENGTH * 4U);
+}
+
+void CM17TX::setTXDelay(uint8_t delay)
+{
+  m_txDelay = 600U + uint16_t(delay) * 12U;        // 500ms + tx delay
+
+  if (m_txDelay > 1200U)
+    m_txDelay = 1200U;
+}
+
+uint8_t CM17TX::getSpace() const
+{
+  return m_buffer.getSpace() / M17_FRAME_LENGTH_BYTES;
+}
+
+void CM17TX::setParams(uint8_t txHang)
+{
+  m_txHang = txHang * 1200U;
+}

M17TX.h

@@ -0,0 +1,56 @@
+/*
+ *   Copyright (C) 2015,2016,2017,2020 by Jonathan Naylor G4KLX
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if !defined(M17TX_H)
+#define  M17TX_H
+
+#include "Config.h"
+
+#include "SerialRB.h"
+
+class CM17TX {
+public:
+  CM17TX();
+
+  uint8_t writeData(const uint8_t* data, uint8_t length);
+
+  void process();
+
+  void setTXDelay(uint8_t delay);
+
+  uint8_t getSpace() const;
+
+  void setParams(uint8_t txHang);
+
+private:
+  CSerialRB                        m_buffer;
+  arm_fir_interpolate_instance_q15 m_modFilter;
+  q15_t                            m_modState[16U];    // blockSize + phaseLength - 1, 4 + 9 - 1 plus some spare
+  uint8_t                          m_poBuffer[1200U];
+  uint16_t                         m_poLen;
+  uint16_t                         m_poPtr;
+  uint16_t                         m_txDelay;
+  uint32_t                         m_txHang;
+  uint32_t                         m_txCount;
+
+  void writeByte(uint8_t c);
+  void writeSilence();
+};
+
+#endif
+

MMDVM.cpp

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2015,2016,2017,2018 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2015,2016,2017,2018,2020 by Jonathan Naylor G4KLX
  *   Copyright (C) 2016 by Mathis Schmieder DB9MAT
  *   Copyright (C) 2016 by Colin Durbridge G4EML
  *
@@ -31,7 +31,9 @@ bool m_dmrEnable    = true;
 bool m_ysfEnable    = true;
 bool m_p25Enable    = true;
 bool m_nxdnEnable   = true;
+bool m_m17Enable    = true;
 bool m_pocsagEnable = true;
+bool m_fmEnable     = true;
 
 bool m_duplex = true;
 
@@ -57,13 +59,19 @@ CP25TX     p25TX;
 CNXDNRX    nxdnRX;
 CNXDNTX    nxdnTX;
 
+CM17RX     m17RX;
+CM17TX     m17TX;
+
 CPOCSAGTX  pocsagTX;
 
+CFM        fm;
+
 CCalDStarRX calDStarRX;
 CCalDStarTX calDStarTX;
 CCalDMR     calDMR;
 CCalP25     calP25;
 CCalNXDN    calNXDN;
+CCalFM      calFM;
 CCalPOCSAG  calPOCSAG;
 CCalRSSI    calRSSI;
 
@@ -103,9 +111,15 @@ void loop()
   if (m_nxdnEnable && m_modemState == STATE_NXDN)
     nxdnTX.process();
 
+  if (m_m17Enable && m_modemState == STATE_M17)
+    m17TX.process();
+
   if (m_pocsagEnable && (m_modemState == STATE_POCSAG || pocsagTX.busy()))
     pocsagTX.process();
 
+  if (m_fmEnable && m_modemState == STATE_FM)
+    fm.process();
+
   if (m_modemState == STATE_DSTARCAL)
     calDStarTX.process();
 
@@ -121,6 +135,9 @@ void loop()
   if (m_modemState == STATE_POCSAGCAL)
     calPOCSAG.process();
 
+  if (m_modemState == STATE_FMCAL10K || m_modemState == STATE_FMCAL12K || m_modemState == STATE_FMCAL15K || m_modemState == STATE_FMCAL20K || m_modemState == STATE_FMCAL25K ||m_modemState == STATE_FMCAL30K)
+    calFM.process();
+
   if (m_modemState == STATE_IDLE)
     cwIdTX.process();
 }

MMDVM.ino

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2015,2016,2017,2018 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2015,2016,2017,2018,2020 by Jonathan Naylor G4KLX
  *   Copyright (C) 2016 by Colin Durbridge G4EML
  *
  *   This program is free software; you can redistribute it and/or modify
@@ -28,7 +28,9 @@ bool m_dmrEnable    = true;
 bool m_ysfEnable    = true;
 bool m_p25Enable    = true;
 bool m_nxdnEnable   = true;
+bool m_m17Enable    = true;
 bool m_pocsagEnable = true;
+bool m_fmEnable     = true;
 
 bool m_duplex = true;
 
@@ -54,11 +56,17 @@ CP25TX     p25TX;
 CNXDNRX    nxdnRX;
 CNXDNTX    nxdnTX;
 
+CM17RX     m17RX;
+CM17TX     m17TX;
+
 CPOCSAGTX  pocsagTX;
 
+CFM        fm;
+
 CCalDStarRX calDStarRX;
 CCalDStarTX calDStarTX;
 CCalDMR     calDMR;
+CCalFM      calFM;
 CCalP25     calP25;
 CCalNXDN    calNXDN;
 CCalPOCSAG  calPOCSAG;
@@ -100,15 +108,24 @@ void loop()
   if (m_nxdnEnable && m_modemState == STATE_NXDN)
     nxdnTX.process();
 
+  if (m_m17Enable && m_modemState == STATE_M17)
+    m17TX.process();
+
   if (m_pocsagEnable && (m_modemState == STATE_POCSAG || pocsagTX.busy()))
     pocsagTX.process();
 
+  if (m_fmEnable && m_modemState == STATE_FM)
+    fm.process();
+
   if (m_modemState == STATE_DSTARCAL)
     calDStarTX.process();
 
   if (m_modemState == STATE_DMRCAL || m_modemState == STATE_LFCAL || m_modemState == STATE_DMRCAL1K || m_modemState == STATE_DMRDMO1K)
     calDMR.process();
 
+  if (m_modemState == STATE_FMCAL10K || m_modemState == STATE_FMCAL12K || m_modemState == STATE_FMCAL15K || m_modemState == STATE_FMCAL20K || m_modemState == STATE_FMCAL25K || m_modemState == STATE_FMCAL30K)
+    calFM.process();
+
   if (m_modemState == STATE_P25CAL1K)
     calP25.process();
 
@@ -121,4 +138,3 @@ void loop()
   if (m_modemState == STATE_IDLE)
     cwIdTX.process();
 }
-

MMDVM_STM32F4xx.coproj

@@ -1,338 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<Project version="2G - 1.7.8" name="MMDVM_STM32F4xx">
-  <Target name="MMDVM_Discovery_407" isCurrent="1">
-    <Device manufacturerId="9" manufacturerName="ST" chipId="344" chipName="STM32F407VG" boardId="" boardName=""/>
-    <BuildOption>
-      <Compile>
-        <Option name="OptimizationLevel" value="4"/>
-        <Option name="UseFPU" value="0"/>
-        <Option name="UserEditCompiler" value=""/>
-        <Option name="SupportCPlusplus" value="1"/>
-        <Option name="FPU" value="2"/>
-        <Includepaths>
-          <Includepath path="."/>
-        </Includepaths>
-        <DefinedSymbols>
-          <Define name="STM32F4XX"/>
-          <Define name="USE_STDPERIPH_DRIVER"/>
-          <Define name="__ASSEMBLY__"/>
-          <Define name="SUPPORT_CPLUSPLUS"/>
-          <Define name="STM32F40_41xxx"/>
-          <Define name="HSE_VALUE=8000000"/>
-          <Define name="STM32F4_DISCOVERY"/>
-          <Define name="__FPU_USED"/>
-        </DefinedSymbols>
-      </Compile>
-      <Link useDefault="0">
-        <Option name="DiscardUnusedSection" value="0"/>
-        <Option name="UserEditLinkder" value=""/>
-        <Option name="UseMemoryLayout" value="0"/>
-        <Option name="nostartfiles" value="1"/>
-        <Option name="LTO" value="0"/>
-        <Option name="IsNewStartupCode" value="1"/>
-        <Option name="Library" value="Semihosting"/>
-        <Option name="UserEditLinker" value="-lstdc++; --specs=nano.specs;"/>
-        <LinkedLibraries>
-          <Libset dir="stm32f4xx_lib\cmsis\lib\gcc\" libs="arm_cortexm4lf_math"/>
-        </LinkedLibraries>
-        <MemoryAreas debugInFlashNotRAM="1">
-          <Memory name="IROM1" type="ReadOnly" size="0x00100000" startValue="0x08000000"/>
-          <Memory name="IRAM1" type="ReadWrite" size="0x00020000" startValue="0x20000000"/>
-          <Memory name="IROM2" type="ReadOnly" size="" startValue=""/>
-          <Memory name="IRAM2" type="ReadWrite" size="0x00010000" startValue="0x10000000"/>
-        </MemoryAreas>
-        <LocateLinkFile path="./stm32f4xx_link.ld" type="0"/>
-      </Link>
-      <Output>
-        <Option name="OutputFileType" value="0"/>
-        <Option name="Path" value="./"/>
-        <Option name="Name" value="MMDVM_DIS"/>
-        <Option name="HEX" value="1"/>
-        <Option name="BIN" value="1"/>
-      </Output>
-      <User>
-        <UserRun name="Run#1" type="Before" checked="0" value=""/>
-        <UserRun name="Run#1" type="After" checked="0" value=""/>
-      </User>
-    </BuildOption>
-    <DebugOption>
-      <Option name="org.coocox.codebugger.gdbjtag.core.adapter" value="ST-Link"/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.debugMode" value="SWD"/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.clockDiv" value="1M"/>
-      <Option name="org.coocox.codebugger.gdbjtag.corerunToMain" value="1"/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.jlinkgdbserver" value=""/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.userDefineGDBScript" value=""/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.targetEndianess" value="0"/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.jlinkResetMode" value="Type 0: Normal"/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.resetMode" value="SYSRESETREQ"/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.ifSemihost" value="0"/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.ifCacheRom" value="1"/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.ipAddress" value="127.0.0.1"/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.portNumber" value="2009"/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.autoDownload" value="1"/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.verify" value="1"/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.downloadFuction" value="Erase Effected"/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.defaultAlgorithm" value="STM32F4xx_1024.elf"/>
-    </DebugOption>
-    <ExcludeFile/>
-  </Target>
-  <Target name="MMDVM_Pi_446" isCurrent="0">
-    <Device manufacturerId="9" manufacturerName="ST" chipId="344" chipName="STM32F407VG" boardId="" boardName=""/>
-    <BuildOption>
-      <Compile>
-        <Option name="OptimizationLevel" value="4"/>
-        <Option name="UseFPU" value="0"/>
-        <Option name="UserEditCompiler" value=""/>
-        <Option name="SupportCPlusplus" value="1"/>
-        <Option name="FPU" value="2"/>
-        <Includepaths>
-          <Includepath path="."/>
-        </Includepaths>
-        <DefinedSymbols>
-          <Define name="STM32F4XX"/>
-          <Define name="USE_STDPERIPH_DRIVER"/>
-          <Define name="__ASSEMBLY__"/>
-          <Define name="SUPPORT_CPLUSPLUS"/>
-          <Define name="__FPU_USED"/>
-          <Define name="STM32F446xx"/>
-          <Define name="HSE_VALUE=12000000"/>
-          <Define name="STM32F4_PI"/>
-          <Define name="MODE_LEDS"/>
-        </DefinedSymbols>
-      </Compile>
-      <Link useDefault="0">
-        <Option name="DiscardUnusedSection" value="0"/>
-        <Option name="UserEditLinkder" value=""/>
-        <Option name="UseMemoryLayout" value="0"/>
-        <Option name="nostartfiles" value="1"/>
-        <Option name="LTO" value="0"/>
-        <Option name="IsNewStartupCode" value="1"/>
-        <Option name="Library" value="Semihosting"/>
-        <Option name="UserEditLinker" value="-lstdc++; --specs=nano.specs;"/>
-        <LinkedLibraries>
-          <Libset dir="stm32f4xx_lib\cmsis\lib\gcc\" libs="arm_cortexm4lf_math"/>
-        </LinkedLibraries>
-        <MemoryAreas debugInFlashNotRAM="1">
-          <Memory name="IROM1" type="ReadOnly" size="0x00100000" startValue="0x08000000"/>
-          <Memory name="IRAM1" type="ReadWrite" size="0x00020000" startValue="0x20000000"/>
-          <Memory name="IROM2" type="ReadOnly" size="" startValue=""/>
-          <Memory name="IRAM2" type="ReadWrite" size="0x00010000" startValue="0x10000000"/>
-        </MemoryAreas>
-        <LocateLinkFile path="./stm32f4xx_link.ld" type="0"/>
-      </Link>
-      <Output>
-        <Option name="OutputFileType" value="0"/>
-        <Option name="Path" value="./"/>
-        <Option name="Name" value="MMDVM_PI"/>
-        <Option name="HEX" value="1"/>
-        <Option name="BIN" value="1"/>
-      </Output>
-      <User>
-        <UserRun name="Run#1" type="Before" checked="0" value=""/>
-        <UserRun name="Run#1" type="After" checked="0" value=""/>
-      </User>
-    </BuildOption>
-    <DebugOption>
-      <Option name="org.coocox.codebugger.gdbjtag.core.adapter" value="ST-Link"/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.debugMode" value="SWD"/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.clockDiv" value="1M"/>
-      <Option name="org.coocox.codebugger.gdbjtag.corerunToMain" value="1"/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.jlinkgdbserver" value=""/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.userDefineGDBScript" value=""/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.targetEndianess" value="0"/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.jlinkResetMode" value="Type 0: Normal"/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.resetMode" value="SYSRESETREQ"/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.ifSemihost" value="0"/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.ifCacheRom" value="1"/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.ipAddress" value="127.0.0.1"/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.portNumber" value="2009"/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.autoDownload" value="1"/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.verify" value="1"/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.downloadFuction" value="Erase Effected"/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.defaultAlgorithm" value="STM32F4xx_1024.elf"/>
-    </DebugOption>
-    <ExcludeFile/>
-  </Target>
-  <Target name="MMDVM_Nucleo_446" isCurrent="0">
-    <Device manufacturerId="9" manufacturerName="ST" chipId="344" chipName="STM32F407VG" boardId="" boardName=""/>
-    <BuildOption>
-      <Compile>
-        <Option name="OptimizationLevel" value="4"/>
-        <Option name="UseFPU" value="0"/>
-        <Option name="UserEditCompiler" value=""/>
-        <Option name="SupportCPlusplus" value="1"/>
-        <Option name="FPU" value="2"/>
-        <Includepaths>
-          <Includepath path="."/>
-        </Includepaths>
-        <DefinedSymbols>
-          <Define name="STM32F4XX"/>
-          <Define name="USE_STDPERIPH_DRIVER"/>
-          <Define name="__ASSEMBLY__"/>
-          <Define name="SUPPORT_CPLUSPLUS"/>
-          <Define name="HSE_VALUE=8000000"/>
-          <Define name="__FPU_USED"/>
-          <Define name="STM32F4_NUCLEO"/>
-          <Define name="STM32F446xx"/>
-        </DefinedSymbols>
-      </Compile>
-      <Link useDefault="0">
-        <Option name="DiscardUnusedSection" value="0"/>
-        <Option name="UserEditLinkder" value=""/>
-        <Option name="UseMemoryLayout" value="0"/>
-        <Option name="nostartfiles" value="1"/>
-        <Option name="LTO" value="0"/>
-        <Option name="IsNewStartupCode" value="1"/>
-        <Option name="Library" value="Semihosting"/>
-        <Option name="UserEditLinker" value="-lstdc++; --specs=nano.specs;"/>
-        <LinkedLibraries>
-          <Libset dir="stm32f4xx_lib\cmsis\lib\gcc\" libs="arm_cortexm4lf_math"/>
-        </LinkedLibraries>
-        <MemoryAreas debugInFlashNotRAM="1">
-          <Memory name="IROM1" type="ReadOnly" size="0x00100000" startValue="0x08000000"/>
-          <Memory name="IRAM1" type="ReadWrite" size="0x00020000" startValue="0x20000000"/>
-          <Memory name="IROM2" type="ReadOnly" size="" startValue=""/>
-          <Memory name="IRAM2" type="ReadWrite" size="0x00010000" startValue="0x10000000"/>
-        </MemoryAreas>
-        <LocateLinkFile path="./stm32f4xx_link.ld" type="0"/>
-      </Link>
-      <Output>
-        <Option name="OutputFileType" value="0"/>
-        <Option name="Path" value="./"/>
-        <Option name="Name" value="MMDVM_NUCLEO"/>
-        <Option name="HEX" value="1"/>
-        <Option name="BIN" value="1"/>
-      </Output>
-      <User>
-        <UserRun name="Run#1" type="Before" checked="0" value=""/>
-        <UserRun name="Run#1" type="After" checked="0" value=""/>
-      </User>
-    </BuildOption>
-    <DebugOption>
-      <Option name="org.coocox.codebugger.gdbjtag.core.adapter" value="ST-Link"/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.debugMode" value="SWD"/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.clockDiv" value="1M"/>
-      <Option name="org.coocox.codebugger.gdbjtag.corerunToMain" value="1"/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.jlinkgdbserver" value=""/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.userDefineGDBScript" value=""/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.targetEndianess" value="0"/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.jlinkResetMode" value="Type 0: Normal"/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.resetMode" value="SYSRESETREQ"/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.ifSemihost" value="0"/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.ifCacheRom" value="1"/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.ipAddress" value="127.0.0.1"/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.portNumber" value="2009"/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.autoDownload" value="1"/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.verify" value="1"/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.downloadFuction" value="Erase Effected"/>
-      <Option name="org.coocox.codebugger.gdbjtag.core.defaultAlgorithm" value="STM32F4xx_1024.elf"/>
-    </DebugOption>
-    <ExcludeFile/>
-  </Target>
-  <Components path="./">
-  </Components>
-  <Files>
-    <File name="DMRIdleRX.h" path="DMRIdleRX.h" type="1"/>
-    <File name="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/source/stm32f4xx_dac.c" path="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/source/stm32f4xx_dac.c" type="1"/>
-    <File name="DMRDMOTX.cpp" path="DMRDMOTX.cpp" type="1"/>
-    <File name="DMRRX.cpp" path="DMRRX.cpp" type="1"/>
-    <File name="YSFRX.cpp" path="YSFRX.cpp" type="1"/>
-    <File name="CalRSSI.cpp" path="CalRSSI.cpp" type="1"/>
-    <File name="STM32F4XX_Lib/Device/stm32f4xx.h" path="STM32F4XX_Lib/Device/stm32f4xx.h" type="1"/>
-    <File name="SampleRB.cpp" path="SampleRB.cpp" type="1"/>
-    <File name="CalDStarTX.h" path="CalDStarTX.h" type="1"/>
-    <File name="STM32F4XX_Lib/CMSIS/Include/core_cm4.h" path="STM32F4XX_Lib/CMSIS/Include/core_cm4.h" type="1"/>
-    <File name="DMRSlotRX.h" path="DMRSlotRX.h" type="1"/>
-    <File name="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/source/stm32f4xx_tim.c" path="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/source/stm32f4xx_tim.c" type="1"/>
-    <File name="YSFRX.h" path="YSFRX.h" type="1"/>
-    <File name="STM32F4XX_Lib/CMSIS/Include" path="" type="2"/>
-    <File name="IO.cpp" path="IO.cpp" type="1"/>
-    <File name="DMRDMORX.cpp" path="DMRDMORX.cpp" type="1"/>
-    <File name="P25RX.h" path="P25RX.h" type="1"/>
-    <File name="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/source/misc.c" path="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/source/misc.c" type="1"/>
-    <File name="STM32F4XX_Lib/CMSIS" path="" type="2"/>
-    <File name="SerialArduino.cpp" path="SerialArduino.cpp" type="1"/>
-    <File name="SerialPort.cpp" path="SerialPort.cpp" type="1"/>
-    <File name="STM32F4XX_Lib/Device/stm32f4xx_conf.h" path="STM32F4XX_Lib/Device/stm32f4xx_conf.h" type="1"/>
-    <File name="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/source/stm32f4xx_adc.c" path="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/source/stm32f4xx_adc.c" type="1"/>
-    <File name="DStarTX.cpp" path="DStarTX.cpp" type="1"/>
-    <File name="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/source/stm32f4xx_usart.c" path="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/source/stm32f4xx_usart.c" type="1"/>
-    <File name="SampleRB.h" path="SampleRB.h" type="1"/>
-    <File name="YSFTX.h" path="YSFTX.h" type="1"/>
-    <File name="DMRRX.h" path="DMRRX.h" type="1"/>
-    <File name="CalRSSI.h" path="CalRSSI.h" type="1"/>
-    <File name="IOTeensy.cpp" path="IOTeensy.cpp" type="1"/>
-    <File name="MMDVM.cpp" path="MMDVM.cpp" type="1"/>
-    <File name="STM32F4XX_Lib/CMSIS/Include/core_cmSimd.h" path="STM32F4XX_Lib/CMSIS/Include/core_cmSimd.h" type="1"/>
-    <File name="DMRDMORX.h" path="DMRDMORX.h" type="1"/>
-    <File name="SerialPort.h" path="SerialPort.h" type="1"/>
-    <File name="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/include/stm32f4xx_dac.h" path="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/include/stm32f4xx_dac.h" type="1"/>
-    <File name="CWIdTX.h" path="CWIdTX.h" type="1"/>
-    <File name="STM32F4XX_Lib/Device/system_stm32f4xx.h" path="STM32F4XX_Lib/Device/system_stm32f4xx.h" type="1"/>
-    <File name="STM32F4XX_Lib/CMSIS/Include/core_cmFunc.h" path="STM32F4XX_Lib/CMSIS/Include/core_cmFunc.h" type="1"/>
-    <File name="CalDStarTX.cpp" path="CalDStarTX.cpp" type="1"/>
-    <File name="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/source" path="" type="2"/>
-    <File name="CalDMR.h" path="CalDMR.h" type="1"/>
-    <File name="DMRDMOTX.h" path="DMRDMOTX.h" type="1"/>
-    <File name="IODue.cpp" path="IODue.cpp" type="1"/>
-    <File name="DMRTX.cpp" path="DMRTX.cpp" type="1"/>
-    <File name="P25RX.cpp" path="P25RX.cpp" type="1"/>
-    <File name="STM32F4XX_Lib/CMSIS/Lib/GCC" path="" type="2"/>
-    <File name="STM32F4XX_Lib" path="" type="2"/>
-    <File name="STM32F4XX_Lib/CMSIS/Include/core_cmInstr.h" path="STM32F4XX_Lib/CMSIS/Include/core_cmInstr.h" type="1"/>
-    <File name="DMRTX.h" path="DMRTX.h" type="1"/>
-    <File name="STM32F4XX_Lib/Device/system_stm32f4xx.c" path="STM32F4XX_Lib/Device/system_stm32f4xx.c" type="1"/>
-    <File name="RSSIRB.h" path="RSSIRB.h" type="1"/>
-    <File name="STM32F4XX_Lib/Device/startup/startup_stm32f4xx.c" path="STM32F4XX_Lib/Device/startup/startup_stm32f4xx.c" type="1"/>
-    <File name="STM32F4XX_Lib/Device/startup" path="" type="2"/>
-    <File name="SerialRB.h" path="SerialRB.h" type="1"/>
-    <File name="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/include/stm32f4xx_gpio.h" path="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/include/stm32f4xx_gpio.h" type="1"/>
-    <File name="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver" path="" type="2"/>
-    <File name="DMRDefines.h" path="DMRDefines.h" type="1"/>
-    <File name="CalDMR.cpp" path="CalDMR.cpp" type="1"/>
-    <File name="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/include/stm32f4xx_adc.h" path="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/include/stm32f4xx_adc.h" type="1"/>
-    <File name="SerialSTM.cpp" path="SerialSTM.cpp" type="1"/>
-    <File name="STM32F4XX_Lib/CMSIS/Lib/GCC/libarm_cortexM4lf_math.a" path="STM32F4XX_Lib/CMSIS/Lib/GCC/libarm_cortexM4lf_math.a" type="1"/>
-    <File name="DStarDefines.h" path="DStarDefines.h" type="1"/>
-    <File name="DStarRX.h" path="DStarRX.h" type="1"/>
-    <File name="Config.h" path="Config.h" type="1"/>
-    <File name="DMRSlotType.cpp" path="DMRSlotType.cpp" type="1"/>
-    <File name="Globals.h" path="Globals.h" type="1"/>
-    <File name="STM32F4XX_Lib/Device" path="" type="2"/>
-    <File name="CalDStarRX.cpp" path="CalDStarRX.cpp" type="1"/>
-    <File name="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/include/stm32f4xx_tim.h" path="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/include/stm32f4xx_tim.h" type="1"/>
-    <File name="CalDStarRX.h" path="CalDStarRX.h" type="1"/>
-    <File name="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/include" path="" type="2"/>
-    <File name="IO.h" path="IO.h" type="1"/>
-    <File name="Utils.cpp" path="Utils.cpp" type="1"/>
-    <File name="STM32F4XX_Lib/CMSIS/.DS_Store" path="STM32F4XX_Lib/CMSIS/.DS_Store" type="1"/>
-    <File name="STM32F4XX_Lib/CMSIS/Lib/.DS_Store" path="STM32F4XX_Lib/CMSIS/Lib/.DS_Store" type="1"/>
-    <File name="Utils.h" path="Utils.h" type="1"/>
-    <File name="STM32F4XX_Lib/CMSIS/Lib" path="" type="2"/>
-    <File name="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/.DS_Store" path="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/.DS_Store" type="1"/>
-    <File name="STM32F4XX_Lib/CMSIS/Include/.DS_Store" path="STM32F4XX_Lib/CMSIS/Include/.DS_Store" type="1"/>
-    <File name="STM32F4XX_Lib/CMSIS/Include/arm_math.h" path="STM32F4XX_Lib/CMSIS/Include/arm_math.h" type="1"/>
-    <File name="YSFDefines.h" path="YSFDefines.h" type="1"/>
-    <File name="DStarTX.h" path="DStarTX.h" type="1"/>
-    <File name="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/source/stm32f4xx_rcc.c" path="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/source/stm32f4xx_rcc.c" type="1"/>
-    <File name="STM32F4XX_Lib/Device/.DS_Store" path="STM32F4XX_Lib/Device/.DS_Store" type="1"/>
-    <File name="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/include/stm32f4xx_rcc.h" path="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/include/stm32f4xx_rcc.h" type="1"/>
-    <File name="P25Defines.h" path="P25Defines.h" type="1"/>
-    <File name="DMRSlotType.h" path="DMRSlotType.h" type="1"/>
-    <File name="Debug.h" path="Debug.h" type="1"/>
-    <File name="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/include/misc.h" path="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/include/misc.h" type="1"/>
-    <File name="P25TX.h" path="P25TX.h" type="1"/>
-    <File name="RSSIRB.cpp" path="RSSIRB.cpp" type="1"/>
-    <File name="DStarRX.cpp" path="DStarRX.cpp" type="1"/>
-    <File name="DMRSlotRX.cpp" path="DMRSlotRX.cpp" type="1"/>
-    <File name="IOSTM.cpp" path="IOSTM.cpp" type="1"/>
-    <File name="P25TX.cpp" path="P25TX.cpp" type="1"/>
-    <File name="SerialRB.cpp" path="SerialRB.cpp" type="1"/>
-    <File name="CWIdTX.cpp" path="CWIdTX.cpp" type="1"/>
-    <File name="DMRIdleRX.cpp" path="DMRIdleRX.cpp" type="1"/>
-    <File name="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/include/stm32f4xx_usart.h" path="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/include/stm32f4xx_usart.h" type="1"/>
-    <File name="STM32F4XX_Lib/.DS_Store" path="STM32F4XX_Lib/.DS_Store" type="1"/>
-    <File name="YSFTX.cpp" path="YSFTX.cpp" type="1"/>
-    <File name="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/source/stm32f4xx_gpio.c" path="STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/source/stm32f4xx_gpio.c" type="1"/>
-  </Files>
-</Project>

Makefile

@@ -25,6 +25,7 @@ F7_LIB_PATH=./STM32F7XX_Lib
 # MCU external clock frequency (Hz)
 CLK_MMDVM_PI=12000000
 CLK_NUCLEO=8000000
+CLK_12MHZ=12000000
 
 # Directory Structure
 BINDIR=bin
@@ -93,6 +94,8 @@ ifndef $(OSC)
 		OSC=$(CLK_MMDVM_PI)
 	else ifeq ($(MAKECMDGOALS),pi-f722)
 		OSC=$(CLK_MMDVM_PI)
+	else ifeq ($(MAKECMDGOALS),drcc_nqf)
+		OSC=$(CLK_12MHZ)
 	else
 		OSC=$(CLK_NUCLEO)
 	endif
@@ -134,6 +137,13 @@ DEFS_RPT_HAT=-DUSE_HAL_DRIVER -DSTM32F722xx -DSTM32F7XX -DSTM32F722_RPT_HAT -DHS
 DEFS_DVM=-DUSE_STDPERIPH_DRIVER -DSTM32F4XX -DSTM32F446xx -DSTM32F4_DVM -DHSE_VALUE=$(OSC) -DMADEBYMAKEFILE
 # MMDVM_RPT_Hat BG4TGO, BG5HHP board:
 DEFS_RPT_HAT_TGO=-DUSE_STDPERIPH_DRIVER -DSTM32F4XX -DSTM32F40_41xxx -DSTM32F4_RPT_HAT_TGO -DHSE_VALUE=$(OSC) -DMADEBYMAKEFILE
+# DRCC_DVM BG7NQF board:
+DEFS_DRCC_DVM=-DUSE_STDPERIPH_DRIVER -DSTM32F4XX -DSTM32F446xx -DDRCC_DVM -DHSE_VALUE=$(OSC) -DMADEBYMAKEFILE
+# WA0EDA F405 MTR2K, MASTR3 board:
+DEFS_EDA_405=-DUSE_STDPERIPH_DRIVER -DSTM32F4XX -DSTM32F40_41xxx -DSTM32F4_EDA_405 -DHSE_VALUE=$(OSC) -DMADEBYMAKEFILE
+# WA0EDA F446 MTR2K, MASTR3 board:
+DEFS_EDA_446=-DUSE_STDPERIPH_DRIVER -DSTM32F4XX -DSTM32F446xx -DSTM32F4_EDA_446 -DHSE_VALUE=$(OSC) -DMADEBYMAKEFILE
+
 
 # Build compiler flags
 CFLAGS_F4=-c $(MCFLAGS_F4) $(INCLUDES_F4)
@@ -149,10 +159,10 @@ LDFLAGS_F722 =-T stm32f722_link.ld $(MCFLAGS_F7) --specs=nosys.specs $(INCLUDES_
 # Common flags
 CFLAGS=-Os -ffunction-sections -fdata-sections -fno-builtin -Wno-implicit -DCUSTOM_NEW -DNO_EXCEPTIONS
 CXXFLAGS=-Os -fno-exceptions -ffunction-sections -fdata-sections -fno-builtin -fno-rtti -DCUSTOM_NEW -DNO_EXCEPTIONS
-LDFLAGS=-Os --specs=nano.specs
+LDFLAGS=-Os --specs=nano.specs -Wl,-Map=bin/mmdvm.map
 
 # Build Rules
-.PHONY: all release dis pi pi-f722 f4m nucleo f767 dvm clean
+.PHONY: all release dis pi pi-f722 f4m nucleo f767 dvm drcc_nqf clean
 
 # Default target: Nucleo-64 F446RE board
 all: nucleo
@@ -217,6 +227,24 @@ dvm: CXXFLAGS+=$(CXXFLAGS_F4) $(DEFS_DVM)
 dvm: LDFLAGS+=$(LDFLAGS_F4)
 dvm: release_f4
 
+drcc_nqf: GitVersion.h
+drcc_nqf: CFLAGS+=$(CFLAGS_F4) $(DEFS_DRCC_DVM) -DDRCC_DVM_NQF
+drcc_nqf: CXXFLAGS+=$(CXXFLAGS_F4) $(DEFS_DRCC_DVM) -DDRCC_DVM_NQF
+drcc_nqf: LDFLAGS+=$(LDFLAGS_F4)
+drcc_nqf: release_f4
+
+eda405: GitVersion.h
+eda405: CFLAGS+=$(CFLAGS_F4) $(DEFS_EDA_405)
+eda405: CXXFLAGS+=$(CXXFLAGS_F4) $(DEFS_EDA_405)
+eda405: LDFLAGS+=$(LDFLAGS_F4)
+eda405: release_f4
+
+eda446: GitVersion.h
+eda446: CFLAGS+=$(CFLAGS_F4) $(DEFS_EDA_446)
+eda446: CXXFLAGS+=$(CXXFLAGS_F4) $(DEFS_EDA_446)
+eda446: LDFLAGS+=$(LDFLAGS_F4)
+eda446: release_f4
+
 release_f4: $(BINDIR)
 release_f4: $(OBJDIR_F4)
 release_f4: $(BINDIR)/$(BINHEX_F4)
@@ -239,7 +267,7 @@ $(OBJDIR_F7):
 $(BINDIR)/$(BINHEX_F4): $(BINDIR)/$(BINELF_F4)
 	$(CP) -O ihex $< $@
 	@echo "Objcopy from ELF to IHEX complete!\n"
-	
+
 $(BINDIR)/$(BINBIN_F4): $(BINDIR)/$(BINELF_F4)
 	$(CP) -O binary $< $@
 	@echo "Objcopy from ELF to BINARY complete!\n"
@@ -252,7 +280,7 @@ $(BINDIR)/$(BINELF_F4): $(OBJ_F4)
 $(BINDIR)/$(BINHEX_F7): $(BINDIR)/$(BINELF_F7)
 	$(CP) -O ihex $< $@
 	@echo "Objcopy from ELF to IHEX complete!\n"
-	
+
 $(BINDIR)/$(BINBIN_F7): $(BINDIR)/$(BINELF_F7)
 	$(CP) -O binary $< $@
 	@echo "Objcopy from ELF to BINARY complete!\n"
@@ -338,17 +366,16 @@ endif
 
 deploy-f4m: deploy-pi
 deploy-dvm: deploy-pi
+deploy-eda405: deploy-pi
+deploy-eda446: deploy-pi
 
 deploy-pi-f7:
 ifneq ($(wildcard /usr/local/bin/stm32flash),)
 	-/usr/local/bin/stm32flash -i 20,-21,21:-20,21 /dev/ttyAMA0
-	-/usr/local/bin/stm32ld /dev/ttyAMA0 57600 bin/$(BINBIN_F7)
 	/usr/local/bin/stm32flash -v -w bin/$(BINBIN_F7) -g 0x0 -R -c /dev/ttyAMA0
-endif
 
-ifneq ($(wildcard /usr/bin/stm32flash),)
+else ifneq ($(wildcard /usr/bin/stm32flash),)
 	-/usr/bin/stm32flash -i 20,-21,21:-20,21 /dev/ttyAMA0
-	-/usr/bin/stm32ld /dev/ttyAMA0 57600 bin/$(BINBIN_F7)
 	/usr/bin/stm32flash -v -w bin/$(BINBIN_F7) -g 0x0 -R -c /dev/ttyAMA0
 endif
 
@@ -368,3 +395,7 @@ else
 	echo "#define GITVERSION \"0000000\"" > $@
 endif
 endif
+
+flash_f4:
+	@echo "flashing firmware..."
+	st-flash write bin/$(BINBIN_F4) 0x8000000

Makefile.CMSIS

@@ -25,7 +25,7 @@ STARTUP:=$(SYSDIR)/startup_stm32f105xc.S
 STARTUP_DEFS=
 
 # Include directory for CMSIS
-CMSISDIR:=/opt/STM32Cube_FW_F1_V1.4.0/Drivers/CMSIS
+CMSISDIR:=STM32F10X_Lib/CMSIS
 
 # Libraries
 LIBDIR:=
@@ -65,7 +65,7 @@ COMMON_FLAGS =-mthumb -mlittle-endian -mcpu=$(MCPU)
 COMMON_FLAGS+= -Wall
 COMMON_FLAGS+= -I. -I$(CMSISDIR)/Include -I$(CMSISDIR)/Device/ST/STM32F1xx/Include -I$(SYSDIR)
 COMMON_FLAGS+=  $(addprefix -I,$(INCDIR))
-COMMON_FLAGS+= -D$(MCU) -DMADEBYMAKEFILE
+COMMON_FLAGS+= -D$(MCU) -DMADEBYMAKEFILE -DSTM32F1
 COMMON_FLAGS+= -Os -flto -ffunction-sections -fdata-sections
 COMMON_FLAGS+= -g
 # Assembler flags

NXDNTX.cpp

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2009-2018 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2009-2018,2020 by Jonathan Naylor G4KLX
  *   Copyright (C) 2017 by Andy Uribe CA6JAU
  *
  *   This program is free software; you can redistribute it and/or modify
@@ -53,7 +53,9 @@ m_sincState(),
 m_poBuffer(),
 m_poLen(0U),
 m_poPtr(0U),
-m_txDelay(240U)      // 200ms
+m_txDelay(240U),     // 200ms
+m_txHang(3000U),     // 5s
+m_txCount(0U)
 {
   ::memset(m_modState, 0x00U, 16U * sizeof(q15_t));
   ::memset(m_sincState,  0x00U, 70U * sizeof(q15_t));
@@ -70,10 +72,7 @@ m_txDelay(240U)      // 200ms
 
 void CNXDNTX::process()
 {
-  if (m_buffer.getData() == 0U && m_poLen == 0U)
+  if (m_poLen == 0U && m_buffer.getData() > 0U) {
-    return;
-
-  if (m_poLen == 0U) {
     if (!m_tx) {
       for (uint16_t i = 0U; i < m_txDelay; i++)
         m_poBuffer[m_poLen++] = NXDN_SYNC;
@@ -98,6 +97,8 @@ void CNXDNTX::process()
       writeByte(c);
 
       space -= 4U * NXDN_RADIO_SYMBOL_LENGTH;
+      if (m_duplex)
+        m_txCount = m_txHang;
       
       if (m_poPtr >= m_poLen) {
         m_poPtr = 0U;
@@ -105,6 +106,19 @@ void CNXDNTX::process()
         return;
       }
     }
+  } else if (m_txCount > 0U) {
+    // Transmit silence until the hang timer has expired.
+    uint16_t space = io.getSpace();
+
+    while (space > (4U * NXDN_RADIO_SYMBOL_LENGTH)) {
+      writeSilence();
+
+      space -= 4U * NXDN_RADIO_SYMBOL_LENGTH;
+      m_txCount--;
+
+      if (m_txCount == 0U)
+        return;
+    }
   }
 }
 
@@ -155,6 +169,19 @@ void CNXDNTX::writeByte(uint8_t c)
   io.write(STATE_NXDN, outBuffer, NXDN_RADIO_SYMBOL_LENGTH * 4U);
 }
 
+void CNXDNTX::writeSilence()
+{
+  q15_t inBuffer[4U] = {0x00U, 0x00U, 0x00U, 0x00U};
+  q15_t intBuffer[NXDN_RADIO_SYMBOL_LENGTH * 4U];
+  q15_t outBuffer[NXDN_RADIO_SYMBOL_LENGTH * 4U];
+
+  ::arm_fir_interpolate_q15(&m_modFilter, inBuffer, intBuffer, 4U);
+
+  ::arm_fir_fast_q15(&m_sincFilter, intBuffer, outBuffer, NXDN_RADIO_SYMBOL_LENGTH * 4U);
+
+  io.write(STATE_NXDN, outBuffer, NXDN_RADIO_SYMBOL_LENGTH * 4U);
+}
+
 void CNXDNTX::setTXDelay(uint8_t delay)
 {
   m_txDelay = 300U + uint16_t(delay) * 6U;        // 500ms + tx delay
@@ -168,3 +195,7 @@ uint8_t CNXDNTX::getSpace() const
   return m_buffer.getSpace() / NXDN_FRAME_LENGTH_BYTES;
 }
 
+void CNXDNTX::setParams(uint8_t txHang)
+{
+  m_txHang = txHang * 600U;
+}

NXDNTX.h

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2015,2016,2017,2018 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2015,2016,2017,2018,2020 by Jonathan Naylor G4KLX
  *
  *   This program is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by
@@ -35,6 +35,8 @@ public:
 
   uint8_t getSpace() const;
 
+  void setParams(uint8_t txHang);
+
 private:
   CSerialRB                        m_buffer;
   arm_fir_interpolate_instance_q15 m_modFilter;
@@ -45,9 +47,11 @@ private:
   uint16_t                         m_poLen;
   uint16_t                         m_poPtr;
   uint16_t                         m_txDelay;
+  uint32_t                         m_txHang;
+  uint32_t                         m_txCount;
 
   void writeByte(uint8_t c);
+  void writeSilence();
 };
 
 #endif
-

P25TX.cpp

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2016,2017 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2016,2017,2020 by Jonathan Naylor G4KLX
  *   Copyright (C) 2017 by Andy Uribe CA6JAU
  *
  *   This program is free software; you can redistribute it and/or modify
@@ -51,7 +51,9 @@ m_lpState(),
 m_poBuffer(),
 m_poLen(0U),
 m_poPtr(0U),
-m_txDelay(240U)       // 200ms
+m_txDelay(240U),      // 200ms
+m_txHang(6000U),      // 5s
+m_txCount(0U)
 {
   ::memset(m_modState, 0x00U, 16U * sizeof(q15_t));
   ::memset(m_lpState,  0x00U, 60U * sizeof(q15_t));
@@ -68,10 +70,7 @@ m_txDelay(240U)       // 200ms
 
 void CP25TX::process()
 {
-  if (m_buffer.getData() == 0U && m_poLen == 0U)
+  if (m_poLen == 0U && m_buffer.getData() > 0U) {
-    return;
-
-  if (m_poLen == 0U) {
     if (!m_tx) {
       for (uint16_t i = 0U; i < m_txDelay; i++)
         m_poBuffer[m_poLen++] = P25_START_SYNC;
@@ -94,13 +93,28 @@ void CP25TX::process()
       writeByte(c);
 
       space -= 4U * P25_RADIO_SYMBOL_LENGTH;
-      
+       if (m_duplex)
+        m_txCount = m_txHang;
+
       if (m_poPtr >= m_poLen) {
         m_poPtr = 0U;
         m_poLen = 0U;
         return;
       }
     }
+  } else if (m_txCount > 0U) {
+    // Transmit silence until the hang timer has expired.
+    uint16_t space = io.getSpace();
+
+    while (space > (4U * P25_RADIO_SYMBOL_LENGTH)) {
+      writeSilence();
+
+      space -= 4U * P25_RADIO_SYMBOL_LENGTH;
+      m_txCount--;
+
+      if (m_txCount == 0U)
+        return;
+    }
   }
 }
 
@@ -152,6 +166,19 @@ void CP25TX::writeByte(uint8_t c)
   io.write(STATE_P25, outBuffer, P25_RADIO_SYMBOL_LENGTH * 4U);
 }
 
+void CP25TX::writeSilence()
+{
+  q15_t inBuffer[4U] = {0x00U, 0x00U, 0x00U, 0x00U};
+  q15_t intBuffer[P25_RADIO_SYMBOL_LENGTH * 4U];
+  q15_t outBuffer[P25_RADIO_SYMBOL_LENGTH * 4U];
+
+  ::arm_fir_interpolate_q15(&m_modFilter, inBuffer, intBuffer, 4U);
+
+  ::arm_fir_fast_q15(&m_lpFilter, intBuffer, outBuffer, P25_RADIO_SYMBOL_LENGTH * 4U);
+
+  io.write(STATE_P25, outBuffer, P25_RADIO_SYMBOL_LENGTH * 4U);
+}
+
 void CP25TX::setTXDelay(uint8_t delay)
 {
   m_txDelay = 600U + uint16_t(delay) * 12U;        // 500ms + tx delay
@@ -164,3 +191,8 @@ uint8_t CP25TX::getSpace() const
 {
   return m_buffer.getSpace() / P25_LDU_FRAME_LENGTH_BYTES;
 }
+
+void CP25TX::setParams(uint8_t txHang)
+{
+  m_txHang = txHang * 1200U;
+}

P25TX.h

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2016,2017 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2016,2017,2020 by Jonathan Naylor G4KLX
  *
  *   This program is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by
@@ -35,6 +35,8 @@ public:
 
   uint8_t getSpace() const;
 
+  void setParams(uint8_t txHang);
+
 private:
   CSerialRB                        m_buffer;
   arm_fir_interpolate_instance_q15 m_modFilter;
@@ -45,9 +47,11 @@ private:
   uint16_t                         m_poLen;
   uint16_t                         m_poPtr;
   uint16_t                         m_txDelay;
+  uint32_t                         m_txHang;
+  uint32_t                         m_txCount;
 
   void writeByte(uint8_t c);
+  void writeSilence();
 };
 
 #endif
-

README.md

@@ -1,7 +1,17 @@
-This is the source code of the MMDVM firmware that supports D-Star, DMR, System Fusion, P25, NXDN, and POCSAG modes.
+This is the source code of the MMDVM firmware that supports D-Star, DMR,
+System Fusion, P25, NXDN, POCSAG, and FM modes.
 
-It runs on the Arduino Due, the ST-Micro STM32F1xxx, STM32F4xxx and STM32F7xxx processors, as well as the Teensy 3.1/3.2/3.5/3.6. What these platforms have in common is the use of an ARM Cortex-M3 or M4 processor with a clock speed greater than 70 MHz, and access to at least one analogue to digital converter and one digital to analogue converter.
+It runs on the Arduino Due, the ST-Micro STM32F1xxx, STM32F4xxx and STM32F7xxx
+processors, as well as the Teensy 3.1/3.2/3.5/3.6. What these platforms have in
+common is the use of an ARM Cortex-M3, M4, or M7 processors with a clock speed
+greater than 70 MHz, and access to at least one analogue to digital converter
+and one digital to analogue converter.
 
-In order to build this software for the Arduino Due, you will need to edit a file within the Arduino GUI and that is detailed in the BUILD.txt file. The STM32 support is being supplied via the Coocox IDE with ARM GCC. The Teensy support uses Teensyduino.
+In order to build this software for the Arduino Due, you will need to edit a
+file within the Arduino GUI and that is detailed in the BUILD.txt file. The
+STM32 support is being supplied via the ARM GCC compiler. The Teensy support
+uses Teensyduino.
 
-This software is licenced under the GPL v2 and is intended for amateur and educational use only. Use of this software for commercial purposes is strictly forbidden.
+This software is licenced under the GPL v2 and is intended for amateur and
+educational use only. Use of this software for commercial purposes is strictly
+forbidden.

SerialPort.cpp

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2013,2015,2016,2017,2018 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2013,2015-2020 by Jonathan Naylor G4KLX
  *   Copyright (C) 2016 by Colin Durbridge G4EML
  *
  *   This program is free software; you can redistribute it and/or modify
@@ -63,8 +63,15 @@ const uint8_t MMDVM_P25_LOST     = 0x32U;
 const uint8_t MMDVM_NXDN_DATA    = 0x40U;
 const uint8_t MMDVM_NXDN_LOST    = 0x41U;
 
+const uint8_t MMDVM_M17_DATA     = 0x45U;
+const uint8_t MMDVM_M17_LOST     = 0x46U;
+
 const uint8_t MMDVM_POCSAG_DATA  = 0x50U;
 
+const uint8_t MMDVM_FM_PARAMS1   = 0x60U;
+const uint8_t MMDVM_FM_PARAMS2   = 0x61U;
+const uint8_t MMDVM_FM_PARAMS3   = 0x62U;
+
 const uint8_t MMDVM_ACK          = 0x70U;
 const uint8_t MMDVM_NAK          = 0x7FU;
 
@@ -91,13 +98,15 @@ const uint8_t MMDVM_DEBUG5       = 0xF5U;
 #define TCXO "NO TCXO"
 #endif
 
-#if defined(STM32F4_RPT_HAT_TGO)
+#if defined(DRCC_DVM_NQF)
-#define HW_TYPE "MMDVM_RPT_HAT_TGO"
+#define	HW_TYPE	"MMDVM DRCC_DVM_NQF"
+#elif defined(STM32F4_RPT_HAT_TGO)
+#define	HW_TYPE	"MMDVM RPT_HAT_TGO"
 #else
-#define HW_TYPE "MMDVM"
+#define	HW_TYPE	"MMDVM"
 #endif
 
-#define DESCRIPTION "20180723 (D-Star/DMR/System Fusion/P25/NXDN/POCSAG)"
+#define DESCRIPTION "20201015 (D-Star/DMR/System Fusion/P25/NXDN/M17/POCSAG/FM)"
 
 #if defined(GITVERSION)
 #define concat(h, a, b, c) h " " a " " b " GitID #" c ""
@@ -152,7 +161,7 @@ void CSerialPort::getStatus()
 
   // Send all sorts of interesting internal values
   reply[0U]  = MMDVM_FRAME_START;
-  reply[1U]  = 13U;
+  reply[1U]  = 14U;
   reply[2U]  = MMDVM_GET_STATUS;
 
   reply[3U]  = 0x00U;
@@ -168,6 +177,10 @@ void CSerialPort::getStatus()
     reply[3U] |= 0x10U;
   if (m_pocsagEnable)
     reply[3U] |= 0x20U;
+  if (m_fmEnable)
+    reply[3U] |= 0x40U;
+  if (m_m17Enable)
+    reply[3U] |= 0x80U;
 
   reply[4U]  = uint8_t(m_modemState);
 
@@ -232,7 +245,12 @@ void CSerialPort::getStatus()
   else
     reply[12U] = 0U;
 
-  writeInt(1U, reply, 13);
+  if (m_m17Enable)
+    reply[13U] = m17TX.getSpace();
+  else
+    reply[13U] = 0U;
+
+  writeInt(1U, reply, 14);
 }
 
 void CSerialPort::getVersion()
@@ -256,14 +274,15 @@ void CSerialPort::getVersion()
 
 uint8_t CSerialPort::setConfig(const uint8_t* data, uint8_t length)
 {
-  if (length < 18U)
+  if (length < 23U)
     return 4U;
 
-  bool rxInvert  = (data[0U] & 0x01U) == 0x01U;
+  bool rxInvert        = (data[0U] & 0x01U) == 0x01U;
-  bool txInvert  = (data[0U] & 0x02U) == 0x02U;
+  bool txInvert        = (data[0U] & 0x02U) == 0x02U;
-  bool pttInvert = (data[0U] & 0x04U) == 0x04U;
+  bool pttInvert       = (data[0U] & 0x04U) == 0x04U;
-  bool ysfLoDev  = (data[0U] & 0x08U) == 0x08U;
+  bool ysfLoDev        = (data[0U] & 0x08U) == 0x08U;
-  bool simplex   = (data[0U] & 0x80U) == 0x80U;
+  bool useCOSAsLockout = (data[0U] & 0x20U) == 0x20U;
+  bool simplex         = (data[0U] & 0x80U) == 0x80U;
 
   m_debug = (data[0U] & 0x10U) == 0x10U;
 
@@ -273,6 +292,8 @@ uint8_t CSerialPort::setConfig(const uint8_t* data, uint8_t length)
   bool p25Enable    = (data[1U] & 0x08U) == 0x08U;
   bool nxdnEnable   = (data[1U] & 0x10U) == 0x10U;
   bool pocsagEnable = (data[1U] & 0x20U) == 0x20U;
+  bool fmEnable     = (data[1U] & 0x40U) == 0x40U;
+  bool m17Enable    = (data[1U] & 0x80U) == 0x80U;
 
   uint8_t txDelay = data[2U];
   if (txDelay > 50U)
@@ -280,7 +301,7 @@ uint8_t CSerialPort::setConfig(const uint8_t* data, uint8_t length)
 
   MMDVM_STATE modemState = MMDVM_STATE(data[3U]);
 
-  if (modemState != STATE_IDLE && modemState != STATE_DSTAR && modemState != STATE_DMR && modemState != STATE_YSF && modemState != STATE_P25 && modemState != STATE_NXDN && modemState != STATE_POCSAG && modemState != STATE_DSTARCAL && modemState != STATE_DMRCAL && modemState != STATE_RSSICAL && modemState != STATE_LFCAL && modemState != STATE_DMRCAL1K && modemState != STATE_P25CAL1K && modemState != STATE_DMRDMO1K && modemState != STATE_NXDNCAL1K && modemState != STATE_POCSAGCAL)
+  if (modemState != STATE_IDLE && modemState != STATE_DSTAR && modemState != STATE_DMR && modemState != STATE_YSF && modemState != STATE_P25 && modemState != STATE_NXDN && modemState != STATE_M17 && modemState != STATE_POCSAG && modemState != STATE_FM && modemState != STATE_DSTARCAL && modemState != STATE_DMRCAL && modemState != STATE_RSSICAL && modemState != STATE_LFCAL && modemState != STATE_DMRCAL1K && modemState != STATE_P25CAL1K && modemState != STATE_DMRDMO1K && modemState != STATE_NXDNCAL1K && modemState != STATE_POCSAGCAL && modemState != STATE_FMCAL10K && modemState != STATE_FMCAL12K && modemState != STATE_FMCAL15K && modemState != STATE_FMCAL20K && modemState != STATE_FMCAL25K && modemState != STATE_FMCAL30K)
     return 4U;
   if (modemState == STATE_DSTAR && !dstarEnable)
     return 4U;
@@ -292,8 +313,12 @@ uint8_t CSerialPort::setConfig(const uint8_t* data, uint8_t length)
     return 4U;
   if (modemState == STATE_NXDN && !nxdnEnable)
     return 4U;
+  if (modemState == STATE_M17 && !m17Enable)
+    return 4U;
   if (modemState == STATE_POCSAG && !pocsagEnable)
     return 4U;
+  if (modemState == STATE_FM && !fmEnable)
+    return 4U;
 
   uint8_t rxLevel = data[4U];
 
@@ -318,14 +343,25 @@ uint8_t CSerialPort::setConfig(const uint8_t* data, uint8_t length)
 
   uint8_t pocsagTXLevel = data[17U];
 
-  m_modemState  = modemState;
+  uint8_t fmTXLevel     = data[18U];
+
+  uint8_t p25TXHang     = data[19U];
+
+  uint8_t nxdnTXHang    = data[20U];
+
+  uint8_t m17TXLevel    = data[21U];
+  uint8_t m17TXHang     = data[22U];
+
+  setMode(modemState);
 
   m_dstarEnable  = dstarEnable;
   m_dmrEnable    = dmrEnable;
   m_ysfEnable    = ysfEnable;
   m_p25Enable    = p25Enable;
   m_nxdnEnable   = nxdnEnable;
+  m_m17Enable    = m17Enable;
   m_pocsagEnable = pocsagEnable;
+  m_fmEnable     = fmEnable;
   m_duplex       = !simplex;
 
   dstarTX.setTXDelay(txDelay);
@@ -333,6 +369,7 @@ uint8_t CSerialPort::setConfig(const uint8_t* data, uint8_t length)
   p25TX.setTXDelay(txDelay);
   dmrDMOTX.setTXDelay(txDelay);
   nxdnTX.setTXDelay(txDelay);
+  m17TX.setTXDelay(txDelay);
   pocsagTX.setTXDelay(txDelay);
 
   dmrTX.setColorCode(colorCode);
@@ -342,14 +379,88 @@ uint8_t CSerialPort::setConfig(const uint8_t* data, uint8_t length)
   dmrIdleRX.setColorCode(colorCode);
 
   ysfTX.setParams(ysfLoDev, ysfTXHang);
+  p25TX.setParams(p25TXHang);
+  nxdnTX.setParams(nxdnTXHang);
+  m17TX.setParams(m17TXHang);
 
-  io.setParameters(rxInvert, txInvert, pttInvert, rxLevel, cwIdTXLevel, dstarTXLevel, dmrTXLevel, ysfTXLevel, p25TXLevel, nxdnTXLevel, pocsagTXLevel, txDCOffset, rxDCOffset);
+  io.setParameters(rxInvert, txInvert, pttInvert, rxLevel, cwIdTXLevel, dstarTXLevel, dmrTXLevel, ysfTXLevel, p25TXLevel, nxdnTXLevel, m17TXLevel, pocsagTXLevel, fmTXLevel, txDCOffset, rxDCOffset, useCOSAsLockout);
 
   io.start();
 
   return 0U;
 }
 
+uint8_t CSerialPort::setFMParams1(const uint8_t* data, uint8_t length)
+{
+  if (length < 8U)
+    return 4U;
+
+  uint8_t  speed     = data[0U];;
+  uint16_t frequency = data[1U] * 10U;
+  uint8_t  time      = data[2U];
+  uint8_t  holdoff   = data[3U];
+  uint8_t  highLevel = data[4U];
+  uint8_t  lowLevel  = data[5U];
+
+  bool callAtStart = (data[6U] & 0x01U) == 0x01U;
+  bool callAtEnd   = (data[6U] & 0x02U) == 0x02U;
+  bool callAtLatch = (data[6U] & 0x04U) == 0x04U;
+
+  char callsign[50U];
+  uint8_t n = 0U;
+  for (uint8_t i = 7U; i < length; i++, n++)
+    callsign[n] = data[i];
+  callsign[n] = '\0';
+
+  return fm.setCallsign(callsign, speed, frequency, time, holdoff, highLevel, lowLevel, callAtStart, callAtEnd, callAtLatch);
+}
+
+uint8_t CSerialPort::setFMParams2(const uint8_t* data, uint8_t length)
+{
+  if (length < 6U)
+    return 4U;
+
+  uint8_t  speed     = data[0U];
+  uint16_t frequency = data[1U] * 10U;
+  uint8_t  minTime   = data[2U];
+  uint16_t delay     = data[3U] * 10U;
+  uint8_t  level     = data[4U];
+
+  char ack[50U];
+  uint8_t n = 0U;
+  for (uint8_t i = 5U; i < length; i++, n++)
+    ack[n] = data[i];
+  ack[n] = '\0';
+
+  return fm.setAck(ack, speed, frequency, minTime, delay, level);
+}
+
+uint8_t CSerialPort::setFMParams3(const uint8_t* data, uint8_t length)
+{
+  if (length < 12U)
+    return 4U;
+
+  uint16_t timeout        = data[0U] * 5U;
+  uint8_t  timeoutLevel   = data[1U];
+
+  uint8_t  ctcssFrequency     = data[2U];
+  uint8_t  ctcssHighThreshold = data[3U];
+  uint8_t  ctcssLowThreshold  = data[4U];
+  uint8_t  ctcssLevel         = data[5U];
+
+  uint8_t  kerchunkTime   = data[6U];
+  uint8_t  hangTime       = data[7U];
+
+  uint8_t  accessMode     = data[8U] & 0x7FU;
+  bool     cosInvert      = (data[8U] & 0x80U) == 0x80U;
+
+  uint8_t  rfAudioBoost   = data[9U];
+  uint8_t  maxDev         = data[10U];
+  uint8_t  rxLevel        = data[11U];
+
+  return fm.setMisc(timeout, timeoutLevel, ctcssFrequency, ctcssHighThreshold, ctcssLowThreshold, ctcssLevel, kerchunkTime, hangTime, accessMode, cosInvert, rfAudioBoost, maxDev, rxLevel);
+}
+
 uint8_t CSerialPort::setMode(const uint8_t* data, uint8_t length)
 {
   if (length < 1U)
@@ -360,7 +471,7 @@ uint8_t CSerialPort::setMode(const uint8_t* data, uint8_t length)
   if (modemState == m_modemState)
     return 0U;
 
-  if (modemState != STATE_IDLE && modemState != STATE_DSTAR && modemState != STATE_DMR && modemState != STATE_YSF && modemState != STATE_P25 && modemState != STATE_NXDN && modemState != STATE_POCSAG && modemState != STATE_DSTARCAL && modemState != STATE_DMRCAL && modemState != STATE_RSSICAL && modemState != STATE_LFCAL && modemState != STATE_DMRCAL1K && modemState != STATE_P25CAL1K && modemState != STATE_DMRDMO1K && modemState != STATE_NXDNCAL1K && modemState != STATE_POCSAGCAL)
+  if (modemState != STATE_IDLE && modemState != STATE_DSTAR && modemState != STATE_DMR && modemState != STATE_YSF && modemState != STATE_P25 && modemState != STATE_NXDN && modemState != STATE_M17 && modemState != STATE_POCSAG && modemState != STATE_FM && modemState != STATE_DSTARCAL && modemState != STATE_DMRCAL && modemState != STATE_RSSICAL && modemState != STATE_LFCAL && modemState != STATE_DMRCAL1K && modemState != STATE_P25CAL1K && modemState != STATE_DMRDMO1K && modemState != STATE_NXDNCAL1K && modemState != STATE_POCSAGCAL && modemState != STATE_FMCAL10K  && modemState != STATE_FMCAL12K && modemState != STATE_FMCAL15K && modemState != STATE_FMCAL20K && modemState != STATE_FMCAL25K && modemState != STATE_FMCAL30K)
     return 4U;
   if (modemState == STATE_DSTAR && !m_dstarEnable)
     return 4U;
@@ -372,8 +483,12 @@ uint8_t CSerialPort::setMode(const uint8_t* data, uint8_t length)
     return 4U;
   if (modemState == STATE_NXDN && !m_nxdnEnable)
     return 4U;
+  if (modemState == STATE_M17 && !m_m17Enable)
+    return 4U;
   if (modemState == STATE_POCSAG && !m_pocsagEnable)
     return 4U;
+  if (modemState == STATE_FM && !m_fmEnable)
+    return 4U;
 
   setMode(modemState);
 
@@ -385,160 +500,102 @@ void CSerialPort::setMode(MMDVM_STATE modemState)
   switch (modemState) {
     case STATE_DMR:
       DEBUG1("Mode set to DMR");
-      dstarRX.reset();
-      ysfRX.reset();
-      p25RX.reset();
-      nxdnRX.reset();
-      cwIdTX.reset();
       break;
     case STATE_DSTAR:
       DEBUG1("Mode set to D-Star");
-      dmrIdleRX.reset();
-      dmrDMORX.reset();
-      dmrRX.reset();
-      ysfRX.reset();
-      p25RX.reset();
-      nxdnRX.reset();
-      cwIdTX.reset();
       break;
     case STATE_YSF:
       DEBUG1("Mode set to System Fusion");
-      dmrIdleRX.reset();
-      dmrDMORX.reset();
-      dmrRX.reset();
-      dstarRX.reset();
-      p25RX.reset();
-      nxdnRX.reset();
-      cwIdTX.reset();
       break;
     case STATE_P25:
       DEBUG1("Mode set to P25");
-      dmrIdleRX.reset();
-      dmrDMORX.reset();
-      dmrRX.reset();
-      dstarRX.reset();
-      ysfRX.reset();
-      nxdnRX.reset();
-      cwIdTX.reset();
       break;
     case STATE_NXDN:
       DEBUG1("Mode set to NXDN");
-      dmrIdleRX.reset();
+      break;
-      dmrDMORX.reset();
+    case STATE_M17:
-      dmrRX.reset();
+      DEBUG1("Mode set to M17");
-      dstarRX.reset();
-      ysfRX.reset();
-      p25RX.reset();
-      cwIdTX.reset();
       break;
     case STATE_POCSAG:
       DEBUG1("Mode set to POCSAG");
-      dmrIdleRX.reset();
+      break;
-      dmrDMORX.reset();
+    case STATE_FM:
-      dmrRX.reset();
+      DEBUG1("Mode set to FM");
-      dstarRX.reset();
-      ysfRX.reset();
-      p25RX.reset();
-      nxdnRX.reset();
-      cwIdTX.reset();
       break;
     case STATE_DSTARCAL:
       DEBUG1("Mode set to D-Star Calibrate");
-      dmrIdleRX.reset();
-      dmrDMORX.reset();
-      dmrRX.reset();
-      dstarRX.reset();
-      ysfRX.reset();
-      p25RX.reset();
-      nxdnRX.reset();
-      cwIdTX.reset();
       break;
     case STATE_DMRCAL:
       DEBUG1("Mode set to DMR Calibrate");
-      dmrIdleRX.reset();
-      dmrDMORX.reset();
-      dmrRX.reset();
-      dstarRX.reset();
-      ysfRX.reset();
-      p25RX.reset();
-      nxdnRX.reset();
-      cwIdTX.reset();
       break;
     case STATE_RSSICAL:
       DEBUG1("Mode set to RSSI Calibrate");
-      dmrIdleRX.reset();
-      dmrDMORX.reset();
-      dmrRX.reset();
-      dstarRX.reset();
-      ysfRX.reset();
-      p25RX.reset();
-      nxdnRX.reset();
-      cwIdTX.reset();
       break;
     case STATE_LFCAL:
       DEBUG1("Mode set to 80 Hz Calibrate");
-      dmrIdleRX.reset();
-      dmrDMORX.reset();
-      dmrRX.reset();
-      dstarRX.reset();
-      ysfRX.reset();
-      p25RX.reset();
-      nxdnRX.reset();
-      cwIdTX.reset();
       break;
-    case STATE_DMRCAL1K:
+    case STATE_FMCAL10K:
-      DEBUG1("Mode set to DMR BS 1031 Hz Calibrate");
+      DEBUG1("Mode set to FM 10Khz Calibrate");
-      dmrIdleRX.reset();
+      break;
-      dmrDMORX.reset();
+    case STATE_FMCAL12K:
-      dmrRX.reset();
+      DEBUG1("Mode set to FM 12.5Khz Calibrate");
-      dstarRX.reset();
+      break;
-      ysfRX.reset();
+    case STATE_FMCAL15K:
-      p25RX.reset();
+      DEBUG1("Mode set to FM 15Khz Calibrate");
-      nxdnRX.reset();
+      break;
-      cwIdTX.reset();
+    case STATE_FMCAL20K:
+      DEBUG1("Mode set to FM 20Khz Calibrate");
+      break;
+    case STATE_FMCAL25K:
+      DEBUG1("Mode set to FM 10Khz Calibrate");
+      break;
+    case STATE_FMCAL30K:
+      DEBUG1("Mode set to FM 30Khz Calibrate");
       break;
     case STATE_P25CAL1K:
       DEBUG1("Mode set to P25 1011 Hz Calibrate");
-      dmrIdleRX.reset();
-      dmrDMORX.reset();
-      dmrRX.reset();
-      dstarRX.reset();
-      ysfRX.reset();
-      p25RX.reset();
-      nxdnRX.reset();
-      cwIdTX.reset();
       break;
     case STATE_DMRDMO1K:
       DEBUG1("Mode set to DMR MS 1031 Hz Calibrate");
-      dmrIdleRX.reset();
-      dmrDMORX.reset();
-      dmrRX.reset();
-      dstarRX.reset();
-      ysfRX.reset();
-      p25RX.reset();
-      nxdnRX.reset();
-      cwIdTX.reset();
       break;
     case STATE_NXDNCAL1K:
       DEBUG1("Mode set to NXDN 1031 Hz Calibrate");
-      dmrIdleRX.reset();
-      dmrDMORX.reset();
-      dmrRX.reset();
-      dstarRX.reset();
-      ysfRX.reset();
-      p25RX.reset();
-      nxdnRX.reset();
-      cwIdTX.reset();
       break;
-    default:
+    case STATE_POCSAGCAL:
+      DEBUG1("Mode set to POCSAG Calibrate");
+      break;
+    default:        // STATE_IDLE
       DEBUG1("Mode set to Idle");
-      // STATE_IDLE
       break;
   }
 
-  m_modemState = modemState;
+  if (modemState != STATE_DSTAR)
+    dstarRX.reset();
 
-  io.setMode();
+  if (modemState != STATE_DMR) {
+    dmrIdleRX.reset();
+    dmrDMORX.reset();
+    dmrRX.reset();
+  }
+
+  if (modemState != STATE_YSF)
+    ysfRX.reset();
+
+  if (modemState != STATE_P25)
+    p25RX.reset();
+
+  if (modemState != STATE_NXDN)
+    nxdnRX.reset();
+
+  if (modemState != STATE_M17)
+    m17RX.reset();
+
+  if (modemState != STATE_FM)
+    fm.reset();
+
+  cwIdTX.reset();
+
+  io.setMode(modemState);
 }
 
 void CSerialPort::start()
@@ -608,11 +665,43 @@ void CSerialPort::process()
             sendACK();
             break;
 
+          case MMDVM_FM_PARAMS1:
+            err = setFMParams1(m_buffer + 3U, m_len - 3U);
+            if (err == 0U) {
+              sendACK();
+            } else {
+              DEBUG2("Received invalid FM params 1", err);
+              sendNAK(err);
+            }
+            break;
+
+          case MMDVM_FM_PARAMS2:
+            err = setFMParams2(m_buffer + 3U, m_len - 3U);
+            if (err == 0U) {
+              sendACK();
+            } else {
+              DEBUG2("Received invalid FM params 2", err);
+              sendNAK(err);
+            }
+            break;
+
+          case MMDVM_FM_PARAMS3:
+            err = setFMParams3(m_buffer + 3U, m_len - 3U);
+            if (err == 0U) {
+              sendACK();
+            } else {
+              DEBUG2("Received invalid FM params 3", err);
+              sendNAK(err);
+            }
+            break;
+
           case MMDVM_CAL_DATA:
             if (m_modemState == STATE_DSTARCAL)
               err = calDStarTX.write(m_buffer + 3U, m_len - 3U);
             if (m_modemState == STATE_DMRCAL || m_modemState == STATE_LFCAL || m_modemState == STATE_DMRCAL1K || m_modemState == STATE_DMRDMO1K)
               err = calDMR.write(m_buffer + 3U, m_len - 3U);
+            if (m_modemState == STATE_FMCAL10K || m_modemState == STATE_FMCAL12K || m_modemState == STATE_FMCAL15K || m_modemState == STATE_FMCAL20K || m_modemState == STATE_FMCAL25K || m_modemState == STATE_FMCAL30K)
+              err = calFM.write(m_buffer + 3U, m_len - 3U);
             if (m_modemState == STATE_P25CAL1K)
               err = calP25.write(m_buffer + 3U, m_len - 3U);
             if (m_modemState == STATE_NXDNCAL1K)
@@ -808,6 +897,20 @@ void CSerialPort::process()
             }
             break;
 
+          case MMDVM_M17_DATA:
+            if (m_m17Enable) {
+              if (m_modemState == STATE_IDLE || m_modemState == STATE_M17)
+                err = m17TX.writeData(m_buffer + 3U, m_len - 3U);
+            }
+            if (err == 0U) {
+              if (m_modemState == STATE_IDLE)
+                setMode(STATE_M17);
+            } else {
+              DEBUG2("Received invalid M17 data", err);
+              sendNAK(err);
+            }
+            break;
+
           case MMDVM_POCSAG_DATA:
             if (m_pocsagEnable) {
               if (m_modemState == STATE_IDLE || m_modemState == STATE_POCSAG)
@@ -1134,6 +1237,46 @@ void CSerialPort::writeNXDNLost()
   writeInt(1U, reply, 3);
 }
 
+void CSerialPort::writeM17Data(const uint8_t* data, uint8_t length)
+{
+  if (m_modemState != STATE_M17 && m_modemState != STATE_IDLE)
+    return;
+
+  if (!m_m17Enable)
+    return;
+
+  uint8_t reply[130U];
+
+  reply[0U] = MMDVM_FRAME_START;
+  reply[1U] = 0U;
+  reply[2U] = MMDVM_M17_DATA;
+
+  uint8_t count = 3U;
+  for (uint8_t i = 0U; i < length; i++, count++)
+    reply[count] = data[i];
+
+  reply[1U] = count;
+
+  writeInt(1U, reply, count);
+}
+
+void CSerialPort::writeM17Lost()
+{
+  if (m_modemState != STATE_M17 && m_modemState != STATE_IDLE)
+    return;
+
+  if (!m_m17Enable)
+    return;
+
+  uint8_t reply[3U];
+
+  reply[0U] = MMDVM_FRAME_START;
+  reply[1U] = 3U;
+  reply[2U] = MMDVM_M17_LOST;
+
+  writeInt(1U, reply, 3);
+}
+
 void CSerialPort::writeCalData(const uint8_t* data, uint8_t length)
 {
   if (m_modemState != STATE_DSTARCAL)

SerialPort.h

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2015,2016,2017,2018 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2015,2016,2017,2018,2020 by Jonathan Naylor G4KLX
  *
  *   This program is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by
@@ -50,6 +50,9 @@ public:
   void writeNXDNData(const uint8_t* data, uint8_t length);
   void writeNXDNLost();
 
+  void writeM17Data(const uint8_t* data, uint8_t length);
+  void writeM17Lost();
+
   void writeCalData(const uint8_t* data, uint8_t length);
   void writeRSSIData(const uint8_t* data, uint8_t length);
 
@@ -73,6 +76,9 @@ private:
   uint8_t setConfig(const uint8_t* data, uint8_t length);
   uint8_t setMode(const uint8_t* data, uint8_t length);
   void    setMode(MMDVM_STATE modemState);
+  uint8_t setFMParams1(const uint8_t* data, uint8_t length);
+  uint8_t setFMParams2(const uint8_t* data, uint8_t length);
+  uint8_t setFMParams3(const uint8_t* data, uint8_t length);
 
   // Hardware versions
   void    beginInt(uint8_t n, int speed);
@@ -83,4 +89,3 @@ private:
 };
 
 #endif
-

SerialSTM.cpp

@@ -50,7 +50,7 @@ extern "C" {
 }
 
 /* ************* USART1 ***************** */
-#if defined(STM32F4_PI) || defined(STM32F4_F4M) || defined(STM32F722_F7M) || defined(STM32F722_PI) || defined(STM32F722_RPT_HAT) || defined(STM32F4_DVM) || (defined(STM32F4_NUCLEO) && defined(STM32F4_NUCLEO_ARDUINO_HEADER))
+#if defined(STM32F4_PI) || defined(STM32F4_F4M) || defined(STM32F722_F7M) || defined(STM32F722_PI) || defined(STM32F722_RPT_HAT) || defined(STM32F4_DVM) || (defined(STM32F4_NUCLEO) && defined(STM32F4_NUCLEO_ARDUINO_HEADER)) || defined(DRCC_DVM) || defined(STM32F4_EDA_405) || defined(STM32F4_EDA_446)
 
 volatile uint8_t  TXSerialfifo1[TX_SERIAL_FIFO_SIZE];
 volatile uint8_t  RXSerialfifo1[RX_SERIAL_FIFO_SIZE];
@@ -241,7 +241,7 @@ void WriteUSART1(const uint8_t* data, uint16_t length)
 #endif
 
 /* ************* USART2 ***************** */
-#if defined(STM32F4_NUCLEO) || defined(STM32F4_RPT_HAT_TGO)
+#if defined(STM32F4_NUCLEO) || defined(STM32F4_RPT_HAT_TGO) || defined(DRCC_DVM)
 
 volatile uint8_t  TXSerialfifo2[TX_SERIAL_FIFO_SIZE];
 volatile uint8_t  RXSerialfifo2[RX_SERIAL_FIFO_SIZE];
@@ -841,15 +841,19 @@ void CSerialPort::beginInt(uint8_t n, int speed)
       case 1U:
          #if defined(STM32F4_DISCOVERY) || defined(STM32F7_NUCLEO)
          InitUSART3(speed);
-         #elif defined(STM32F4_PI) || defined(STM32F4_F4M) || defined(STM32F722_PI) || defined(STM32F722_F7M) || defined(STM32F722_RPT_HAT) || defined(STM32F4_DVM)
+         #elif defined(STM32F4_PI) || defined(STM32F4_F4M) || defined(STM32F722_PI) || defined(STM32F722_F7M) || defined(STM32F722_RPT_HAT) || defined(STM32F4_DVM) || defined(STM32F4_EDA_405) || defined(STM32F4_EDA_446)
          InitUSART1(speed);
          #elif defined(STM32F4_NUCLEO) || defined(STM32F4_RPT_HAT_TGO)
          InitUSART2(speed);
+         #elif defined(DRCC_DVM)
+         InitUSART1(speed);
          #endif
          break;
       case 3U:
          #if defined(STM32F4_NUCLEO) && defined(STM32F4_NUCLEO_ARDUINO_HEADER)
          InitUSART1(speed);
+         #elif defined(DRCC_DVM)
+         InitUSART2(speed);
          #else
          InitUART5(speed);
          #endif
@@ -865,14 +869,18 @@ int CSerialPort::availableInt(uint8_t n)
       case 1U:
          #if defined(STM32F4_DISCOVERY) || defined(STM32F7_NUCLEO)
          return AvailUSART3();
-         #elif defined(STM32F4_PI) || defined(STM32F4_F4M) || defined(STM32F722_PI) || defined(STM32F722_F7M) || defined(STM32F722_RPT_HAT) || defined(STM32F4_DVM)
+         #elif defined(STM32F4_PI) || defined(STM32F4_F4M) || defined(STM32F722_PI) || defined(STM32F722_F7M) || defined(STM32F722_RPT_HAT) || defined(STM32F4_DVM) || defined(STM32F4_EDA_405) || defined(STM32F4_EDA_446)
          return AvailUSART1();
          #elif defined(STM32F4_NUCLEO) || defined(STM32F4_RPT_HAT_TGO)
          return AvailUSART2();
+         #elif defined(DRCC_DVM)
+         return AvailUSART1();
          #endif
       case 3U:
          #if defined(STM32F4_NUCLEO) && defined(STM32F4_NUCLEO_ARDUINO_HEADER)
          return AvailUSART1();
+         #elif defined(DRCC_DVM)
+         return AvailUSART2();
          #else
          return AvailUART5();
          #endif
@@ -887,14 +895,18 @@ int CSerialPort::availableForWriteInt(uint8_t n)
       case 1U:
          #if defined(STM32F4_DISCOVERY) || defined(STM32F7_NUCLEO)
          return AvailForWriteUSART3();
-         #elif defined(STM32F4_PI) || defined(STM32F4_F4M) || defined(STM32F722_PI) || defined(STM32F722_F7M) || defined(STM32F722_RPT_HAT) || defined(STM32F4_DVM)
+         #elif defined(STM32F4_PI) || defined(STM32F4_F4M) || defined(STM32F722_PI) || defined(STM32F722_F7M) || defined(STM32F722_RPT_HAT) || defined(STM32F4_DVM) || defined(STM32F4_EDA_405) || defined(STM32F4_EDA_446)
          return AvailForWriteUSART1();
          #elif defined(STM32F4_NUCLEO) || defined(STM32F4_RPT_HAT_TGO)
          return AvailForWriteUSART2();
+         #elif defined(DRCC_DVM)
+         return AvailForWriteUSART1();
          #endif
       case 3U:
          #if defined(STM32F4_NUCLEO) && defined(STM32F4_NUCLEO_ARDUINO_HEADER)
          return AvailForWriteUSART1();
+         #elif defined(DRCC_DVM)
+         return AvailForWriteUSART2();
          #else
          return AvailForWriteUART5();
          #endif
@@ -909,14 +921,18 @@ uint8_t CSerialPort::readInt(uint8_t n)
       case 1U:
          #if defined(STM32F4_DISCOVERY) || defined(STM32F7_NUCLEO)
          return ReadUSART3();
-         #elif defined(STM32F4_PI) || defined(STM32F4_F4M) || defined(STM32F722_PI) || defined(STM32F722_F7M) || defined(STM32F722_RPT_HAT) || defined(STM32F4_DVM)
+         #elif defined(STM32F4_PI) || defined(STM32F4_F4M) || defined(STM32F722_PI) || defined(STM32F722_F7M) || defined(STM32F722_RPT_HAT) || defined(STM32F4_DVM) || defined(STM32F4_EDA_405) || defined(STM32F4_EDA_446)
          return ReadUSART1();
          #elif defined(STM32F4_NUCLEO) || defined(STM32F4_RPT_HAT_TGO)
          return ReadUSART2();
+         #elif defined(DRCC_DVM)
+         return ReadUSART1();
          #endif
       case 3U:
          #if defined(STM32F4_NUCLEO) && defined(STM32F4_NUCLEO_ARDUINO_HEADER)
          return ReadUSART1();
+         #elif defined(DRCC_DVM)
+         return ReadUSART2();
          #else
          return ReadUART5();
          #endif
@@ -933,7 +949,7 @@ void CSerialPort::writeInt(uint8_t n, const uint8_t* data, uint16_t length, bool
          WriteUSART3(data, length);
          if (flush)
             TXSerialFlush3();
-         #elif defined(STM32F4_PI) || defined(STM32F4_F4M) || defined(STM32F722_PI) || defined(STM32F722_F7M) || defined(STM32F722_RPT_HAT) || defined(STM32F4_DVM)
+         #elif defined(STM32F4_PI) || defined(STM32F4_F4M) || defined(STM32F722_PI) || defined(STM32F722_F7M) || defined(STM32F722_RPT_HAT) || defined(STM32F4_DVM) || defined(STM32F4_EDA_405) || defined(STM32F4_EDA_446)
          WriteUSART1(data, length);
          if (flush)
             TXSerialFlush1();
@@ -941,6 +957,10 @@ void CSerialPort::writeInt(uint8_t n, const uint8_t* data, uint16_t length, bool
          WriteUSART2(data, length);
          if (flush)
             TXSerialFlush2();
+         #elif defined(DRCC_DVM)
+         WriteUSART1(data, length);
+         if (flush)
+            TXSerialFlush1();
          #endif
          break;
       case 3U:
@@ -948,6 +968,10 @@ void CSerialPort::writeInt(uint8_t n, const uint8_t* data, uint16_t length, bool
          WriteUSART1(data, length);
          if (flush)
             TXSerialFlush1();
+         #elif defined(DRCC_DVM)
+         WriteUSART2(data, length);
+         if (flush)
+            TXSerialFlush2();
          #else
          WriteUART5(data, length);
          if (flush)

Tools/FMGenerateFilterCoefficients.py

@@ -0,0 +1,46 @@
+# based on https://github.com/berndporr/iir_fixed_point/blob/master/gen_coeff.py
+
+import numpy as np
+import scipy.signal as signal
+import pylab as pl
+
+# Calculate the coefficients for a pure fixed point
+# integer filter
+
+# sampling rate
+fs = 24000
+
+# cutoffs
+f1 = 300
+f2 = 2700
+# ripple
+rp = 0.2
+
+# scaling factor in bits, do not change !
+q = 0
+# scaling factor as facor...
+scaling_factor = 2**q
+
+# let's generate a sequence of 2nd order IIR filters
+sos = signal.cheby1(3,rp,[f1, f2],'bandpass', output='sos', fs=fs)
+#sos = signal.cheby1(1, rp, 2122, 'lowpass', output='sos', fs=fs) #deemphasis filter
+#sos = signal.cheby1(1, rp, 2122, 'highpass', output='sos', fs=fs) #deemphasis filter
+
+#sos = np.round((sos) * scaling_factor)
+
+# print coefficients
+for biquad in sos:
+    for coeff in biquad:
+        #print(int(coeff),",",sep="",end="")
+        print((coeff),",",sep="",end="")
+    print("")
+
+# plot the frequency response
+b,a = signal.sos2tf(sos)
+w,h = signal.freqz(b,a)
+pl.plot(w/np.pi/2*fs,20*np.log(np.abs(h)))
+pl.xlabel('frequency/Hz');
+pl.ylabel('gain/dB');
+pl.ylim(top=1,bottom=-20);
+pl.xlim(left=250, right=12000);
+pl.show()

Tools/emphasis.txt

@@ -0,0 +1,58 @@
+% GNU Octave script to generate pre and deemphasis filters
+% https://dsp.stackexchange.com/questions/34605/biquad-cookbook-formula-for-broadcast-fm-de-emphasis
+% PACKAGES
+
+pkg load control
+pkg load signal
+
+clear all;
+clc;
+
+fs = 24000;
+samplingtime = 1/fs;
+
+% analog prototype
+A2 = [1];
+B2 = [0.000075 1];
+
+% Pre
+Ds = tf(B2, A2);
+% De
+% Ds = tf(A2, B2);
+ 
+Ds = Ds/dcgain(Ds);
+
+% MZT
+T1 = 0.000075; % 75us
+z1 = -exp(-1.0/(fs*T1));
+p1 = 1+z1;
+
+a0 = 1.0;
+a1 = p1;
+a2 = 0;
+
+b0 = 1.0;
+b1 = z1;
+b2 = 0;
+
+% swap between a1, b1 to select pre- or de-emphasis
+
+# Pre
+Bmzt = [b0 a1 b2]
+Amzt = [a0 b1 a2]
+% De
+% Bmzt = [b0 b1 b2]
+% Amzt = [a0 a1 a2]
+
+DzMZT = tf(Amzt, Bmzt, samplingtime);
+DzMZT = DzMZT/dcgain(DzMZT);
+
+%% Plot
+wmin = 2 * pi * 20.0; % 20Hz
+wmax = 2 * pi * ((fs/2.0) - (fs/2 - 20000)); %20kHz
+
+figure(1);
+bode(Ds, 'b', DzMZT, 'c', {wmin, wmax});
+legend('Analog prototype', 'MZT 2nd order','location', 'northwest');
+grid on;
+pause();

Utils.cpp

@@ -30,6 +30,15 @@ uint8_t countBits8(uint8_t bits)
   return BITS_TABLE[bits];
 }
 
+uint8_t countBits16(uint16_t bits)
+{
+  uint8_t* p = (uint8_t*)&bits;
+  uint8_t n = 0U;
+  n += BITS_TABLE[p[0U]];
+  n += BITS_TABLE[p[1U]];
+  return n;
+}
+
 uint8_t countBits32(uint32_t bits)
 {
   uint8_t* p = (uint8_t*)&bits;

Utils.h

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2015,2016 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2015,2016,2020 by Jonathan Naylor G4KLX
  *
  *   This program is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by
@@ -32,6 +32,8 @@
 
 uint8_t countBits8(uint8_t bits);
 
+uint8_t countBits16(uint16_t bits);
+
 uint8_t countBits32(uint32_t bits);
 
 uint8_t countBits64(uint64_t bits);

YSFRX.cpp

@@ -36,7 +36,7 @@ const uint8_t NOAVEPTR = 99U;
 
 const uint16_t NOENDPTR = 9999U;
 
-const unsigned int MAX_SYNC_FRAMES = 4U + 1U;
+const unsigned int MAX_SYNC_FRAMES = 1U + 1U;
 
 CYSFRX::CYSFRX() :
 m_state(YSFRXS_NONE),

YSFTX.cpp

@@ -66,9 +66,6 @@ m_txCount(0U)
 
 void CYSFTX::process()
 {
-  if (m_buffer.getData() == 0U && m_poLen == 0U && m_txCount == 0U)
-    return;
-
   // If we have YSF data to transmit, do so.
   if (m_poLen == 0U && m_buffer.getData() > 0U) {
     if (!m_tx) {
@@ -191,4 +188,3 @@ void CYSFTX::setParams(bool on, uint8_t txHang)
   m_loDev  = on;
   m_txHang = txHang * 1200U;
 }
-

pins/pins_f4_discovery.h

@@ -0,0 +1,96 @@
+/*
+ *   Copyright (C) 2019,2020 by BG5HHP
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _PINS_F4_DISCOVERY_H
+#define _PINS_F4_DISCOVERY_H
+
+/*
+Pin definitions for STM32F4 Discovery Board:
+
+PTT      PB13   output           P1 Pin37
+COSLED   PA7    output           P1 Pin17
+LED      PD15   output           P1 Pin47
+COS      PA5    input            P1 Pin15
+
+DSTAR    PD12   output           P1 Pin44
+DMR      PD13   output           P1 Pin45
+YSF      PD14   output           P1 Pin46
+P25      PD11   output           P1 Pin43
+NXDN     PD10   output           P1 Pin42
+
+RX       PA0    analog input     P1 Pin12
+RSSI     PA1    analog input     P1 Pin11
+TX       PA4    analog output    P1 Pin16
+
+EXT_CLK  PA15   input            P2 Pin40
+*/
+
+#define PIN_COS           GPIO_Pin_5
+#define PORT_COS          GPIOA
+#define RCC_Per_COS       RCC_AHB1Periph_GPIOA
+
+#define PIN_PTT           GPIO_Pin_13
+#define PORT_PTT          GPIOB
+#define RCC_Per_PTT       RCC_AHB1Periph_GPIOB
+
+#define PIN_COSLED        GPIO_Pin_7
+#define PORT_COSLED       GPIOA
+#define RCC_Per_COSLED    RCC_AHB1Periph_GPIOA
+
+#define PIN_LED           GPIO_Pin_15
+#define PORT_LED          GPIOD
+#define RCC_Per_LED       RCC_AHB1Periph_GPIOD
+
+#define PIN_P25           GPIO_Pin_11
+#define PORT_P25          GPIOD
+#define RCC_Per_P25       RCC_AHB1Periph_GPIOD
+
+#define PIN_NXDN          GPIO_Pin_10
+#define PORT_NXDN         GPIOD
+#define RCC_Per_NXDN      RCC_AHB1Periph_GPIOD
+
+#define PIN_DSTAR         GPIO_Pin_12
+#define PORT_DSTAR        GPIOD
+#define RCC_Per_DSTAR     RCC_AHB1Periph_GPIOD
+
+#define PIN_DMR           GPIO_Pin_13
+#define PORT_DMR          GPIOD
+#define RCC_Per_DMR       RCC_AHB1Periph_GPIOD
+
+#define PIN_YSF           GPIO_Pin_14
+#define PORT_YSF          GPIOD
+#define RCC_Per_YSF       RCC_AHB1Periph_GPIOD
+
+#define PIN_EXT_CLK       GPIO_Pin_15
+#define SRC_EXT_CLK       GPIO_PinSource15
+#define PORT_EXT_CLK      GPIOA
+
+#define PIN_RX            GPIO_Pin_0
+#define PIN_RX_CH         ADC_Channel_0
+#define PORT_RX           GPIOA
+#define RCC_Per_RX        RCC_AHB1Periph_GPIOA
+
+#define PIN_RSSI          GPIO_Pin_1
+#define PIN_RSSI_CH       ADC_Channel_1
+#define PORT_RSSI         GPIOA
+#define RCC_Per_RSSI      RCC_AHB1Periph_GPIOA
+
+#define PIN_TX            GPIO_Pin_4
+#define PIN_TX_CH         DAC_Channel_1
+
+#endif

pins/pins_f4_drcc_nqf.h

@@ -0,0 +1,144 @@
+/*
+ *   Copyright (C) 2019,2020 by BG5HHP
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _PINS_F4_DRCC_NQF_H
+#define _PINS_F4_DRCC_NQF_H
+
+/*
+Pin definitions for DRCC_DVM BG7NQF  board rev1
+
+TX/PTT_LED  PB12   output
+RX/COS_LED  PB5    output
+STATUS_LED  PB10   output
+
+COS_IN      PB13   input
+
+DSTAR       N/A
+DMR         N/A
+YSF         N/A
+P25         N/A
+NXDN        N/A
+POCSAG      N/A
+
+MDMR/BIT0   PB8    output
+MYSF/BIT1   PB9    output
+MDSTAR/BIT2 PB14   output
+MP25/BIT3   PB15   output          Generic Mode Pins
+MNXDN       N/A
+MPOCSAG     N/A
+
+RX          PA0    analog input
+RSSI        PA1    analog input
+TX          PA4    analog output
+
+EXT_CLK     PA15   input
+
+UART1_TX    PA9    output
+UART1_RX    PA10   output          Host Data Communication
+
+UART2_TX    PA2    output
+UART2_RX    PA3    output          Nextion Data Communication
+
+I2C1_SCL    PB6    output
+I2C1_SDA    PB7    output          OLED Data Communication as master
+
+*/
+
+#define PIN_COS           GPIO_Pin_13
+#define PORT_COS          GPIOB
+#define RCC_Per_COS       RCC_AHB1Periph_GPIOB
+
+#define PIN_PTT           GPIO_Pin_12
+#define PORT_PTT          GPIOB
+#define RCC_Per_PTT       RCC_AHB1Periph_GPIOB
+
+#define PIN_COSLED        GPIO_Pin_5
+#define PORT_COSLED       GPIOB
+#define RCC_Per_COSLED    RCC_AHB1Periph_GPIOB
+
+#define PIN_LED           GPIO_Pin_10
+#define PORT_LED          GPIOB
+#define RCC_Per_LED       RCC_AHB1Periph_GPIOB
+
+#define PIN_TXLED         GPIO_Pin_4
+#define PORT_TXLED        GPIOB
+#define RCC_Per_TXLED     RCC_AHB1Periph_GPIOB
+
+// #define PIN_P25           GPIO_Pin_3
+// #define PORT_P25          GPIOB
+// #define RCC_Per_P25       RCC_AHB1Periph_GPIOB
+
+// #define PIN_NXDN          GPIO_Pin_10
+// #define PORT_NXDN         GPIOA
+// #define RCC_Per_NXDN      RCC_AHB1Periph_GPIOA
+
+// #define PIN_POCSAG        GPIO_Pin_12
+// #define PORT_POCSAG       GPIOB
+// #define RCC_Per_POCSAG    RCC_AHB1Periph_GPIOB
+
+// #define PIN_DSTAR         GPIO_Pin_10
+// #define PORT_DSTAR        GPIOB
+// #define RCC_Per_DSTAR     RCC_AHB1Periph_GPIOB
+
+// #define PIN_DMR           GPIO_Pin_4
+// #define PORT_DMR          GPIOB
+// #define RCC_Per_DMR       RCC_AHB1Periph_GPIOB
+
+// #define PIN_YSF           GPIO_Pin_5
+// #define PORT_YSF          GPIOB
+// #define RCC_Per_YSF       RCC_AHB1Periph_GPIOB
+
+#if defined(MODE_PINS)
+#define PIN_MP25          GPIO_Pin_15
+#define PORT_MP25         GPIOB
+#define RCC_Per_MP25      RCC_AHB1Periph_GPIOB
+
+#define PIN_MDSTAR        GPIO_Pin_9
+#define PORT_MDSTAR       GPIOB
+#define RCC_Per_MDSTAR    RCC_AHB1Periph_GPIOB
+
+#define PIN_MDMR          GPIO_Pin_8
+#define PORT_MDMR         GPIOB
+#define RCC_Per_MDMR      RCC_AHB1Periph_GPIOB
+
+#define PIN_MYSF          GPIO_Pin_14
+#define PORT_MYSF         GPIOB
+#define RCC_Per_MYSF      RCC_AHB1Periph_GPIOB
+
+#endif
+
+#define PIN_EXT_CLK       GPIO_Pin_15
+#define SRC_EXT_CLK       GPIO_PinSource15
+#define PORT_EXT_CLK      GPIOA
+
+#define PIN_RX            GPIO_Pin_0
+#define PIN_RX_CH         ADC_Channel_0
+#define PORT_RX           GPIOA
+#define RCC_Per_RX        RCC_AHB1Periph_GPIOA
+
+#define PIN_RSSI          GPIO_Pin_1
+#define PIN_RSSI_CH       ADC_Channel_1
+#define PORT_RSSI         GPIOA
+#define RCC_Per_RSSI      RCC_AHB1Periph_GPIOA
+
+#define PIN_TX            GPIO_Pin_4
+#define PIN_TX_CH         DAC_Channel_1
+#define PORT_TX           GPIOA
+#define RCC_Per_TX        RCC_AHB1Periph_GPIOA
+
+#endif

pins/pins_f4_f4m.h

@@ -0,0 +1,101 @@
+/*
+ *   Copyright (C) 2019,2020 by BG5HHP
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _PINS_F4_F4M_H
+#define _PINS_F4_F4M_H
+
+/*
+Pin definitions for MMDVM-F4M Pi-Hat F0DEI board:
+
+PTT      PB13   output
+COSLED   PB14   output
+LED      PB15   output
+COS      PC0    input
+
+DSTAR    PC7    output
+DMR      PC8    output
+YSF      PA8    output
+P25      PC9    output
+NXDN     PB1    output
+POCSAG   PB12   output
+
+RX       PA0    analog input
+RSSI     PA7    analog input
+TX       PA4    analog output
+
+EXT_CLK  PA15   input
+*/
+
+#define PIN_COS           GPIO_Pin_0
+#define PORT_COS          GPIOC
+#define RCC_Per_COS       RCC_AHB1Periph_GPIOC
+
+#define PIN_PTT           GPIO_Pin_13
+#define PORT_PTT          GPIOB
+#define RCC_Per_PTT       RCC_AHB1Periph_GPIOB
+
+#define PIN_COSLED        GPIO_Pin_14
+#define PORT_COSLED       GPIOB
+#define RCC_Per_COSLED    RCC_AHB1Periph_GPIOB
+
+#define PIN_LED           GPIO_Pin_15
+#define PORT_LED          GPIOB
+#define RCC_Per_LED       RCC_AHB1Periph_GPIOB
+
+#define PIN_P25           GPIO_Pin_9
+#define PORT_P25          GPIOC
+#define RCC_Per_P25       RCC_AHB1Periph_GPIOC
+
+#define PIN_NXDN          GPIO_Pin_1
+#define PORT_NXDN         GPIOB
+#define RCC_Per_NXDN      RCC_AHB1Periph_GPIOB
+
+#define PIN_POCSAG        GPIO_Pin_12
+#define PORT_POCSAG       GPIOB
+#define RCC_Per_POCSAG    RCC_AHB1Periph_GPIOB
+
+#define PIN_DSTAR         GPIO_Pin_7
+#define PORT_DSTAR        GPIOC
+#define RCC_Per_DSTAR     RCC_AHB1Periph_GPIOC
+
+#define PIN_DMR           GPIO_Pin_8
+#define PORT_DMR          GPIOC
+#define RCC_Per_DMR       RCC_AHB1Periph_GPIOC
+
+#define PIN_YSF           GPIO_Pin_8
+#define PORT_YSF          GPIOA
+#define RCC_Per_YSF       RCC_AHB1Periph_GPIOA
+
+#define PIN_EXT_CLK       GPIO_Pin_15
+#define SRC_EXT_CLK       GPIO_PinSource15
+#define PORT_EXT_CLK      GPIOA
+
+#define PIN_RX            GPIO_Pin_0
+#define PIN_RX_CH         ADC_Channel_0
+#define PORT_RX           GPIOA
+#define RCC_Per_RX        RCC_AHB1Periph_GPIOA
+
+#define PIN_RSSI          GPIO_Pin_7
+#define PIN_RSSI_CH       ADC_Channel_7
+#define PORT_RSSI         GPIOA
+#define RCC_Per_RSSI      RCC_AHB1Periph_GPIOA
+
+#define PIN_TX            GPIO_Pin_4
+#define PIN_TX_CH         DAC_Channel_1
+
+#endif

pins/pins_f4_nucleo_arduino.h

@@ -0,0 +1,101 @@
+/*
+ *   Copyright (C) 2019,2020 by BG5HHP
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _PINS_F4_NUCLEO_ARDUINO_H
+#define _PINS_F4_NUCLEO_ARDUINO_H
+
+/*
+Pin definitions for STM32F4 Nucleo boards (Arduino header):
+
+PTT      PB10   output           CN9 Pin7
+COSLED   PB3    output           CN9 Pin4
+LED      PB5    output           CN9 Pin5
+COS      PB4    input            CN9 Pin6
+
+DSTAR    PA1    output           CN8 Pin2
+DMR      PA4    output           CN8 Pin3
+YSF      PB0    output           CN8 Pin4
+P25      PC1    output           CN8 Pin5
+NXDN     PA3    output           CN9 Pin1
+POCSAG   PB12   output
+
+RX       PA0    analog input     CN8 Pin1
+RSSI     PC0    analog input     CN8 Pin6
+TX       PA5    analog output    CN5 Pin6
+
+EXT_CLK  PB8    input            CN5 Pin10
+*/
+
+#define PIN_COS           GPIO_Pin_4
+#define PORT_COS          GPIOB
+#define RCC_Per_COS       RCC_AHB1Periph_GPIOB
+
+#define PIN_PTT           GPIO_Pin_10
+#define PORT_PTT          GPIOB
+#define RCC_Per_PTT       RCC_AHB1Periph_GPIOB
+
+#define PIN_COSLED        GPIO_Pin_3
+#define PORT_COSLED       GPIOB
+#define RCC_Per_COSLED    RCC_AHB1Periph_GPIOB
+
+#define PIN_LED           GPIO_Pin_5
+#define PORT_LED          GPIOB
+#define RCC_Per_LED       RCC_AHB1Periph_GPIOB
+
+#define PIN_P25           GPIO_Pin_1
+#define PORT_P25          GPIOC
+#define RCC_Per_P25       RCC_AHB1Periph_GPIOC
+
+#define PIN_NXDN          GPIO_Pin_3
+#define PORT_NXDN         GPIOA
+#define RCC_Per_NXDN      RCC_AHB1Periph_GPIOA
+
+#define PIN_POCSAG        GPIO_Pin_12
+#define PORT_POCSAG       GPIOB
+#define RCC_Per_POCSAG    RCC_AHB1Periph_GPIOB
+
+#define PIN_DSTAR         GPIO_Pin_1
+#define PORT_DSTAR        GPIOA
+#define RCC_Per_DSTAR     RCC_AHB1Periph_GPIOA
+
+#define PIN_DMR           GPIO_Pin_4
+#define PORT_DMR          GPIOA
+#define RCC_Per_DMR       RCC_AHB1Periph_GPIOA
+
+#define PIN_YSF           GPIO_Pin_0
+#define PORT_YSF          GPIOB
+#define RCC_Per_YSF       RCC_AHB1Periph_GPIOB
+
+#define PIN_EXT_CLK       GPIO_Pin_8
+#define SRC_EXT_CLK       GPIO_PinSource8
+#define PORT_EXT_CLK      GPIOB
+
+#define PIN_RX            GPIO_Pin_0
+#define PIN_RX_CH         ADC_Channel_0
+#define PORT_RX           GPIOA
+#define RCC_Per_RX        RCC_AHB1Periph_GPIOA
+
+#define PIN_RSSI          GPIO_Pin_0
+#define PIN_RSSI_CH       ADC_Channel_10
+#define PORT_RSSI         GPIOC
+#define RCC_Per_RSSI      RCC_AHB1Periph_GPIOC
+
+#define PIN_TX            GPIO_Pin_5
+#define PIN_TX_CH         DAC_Channel_2
+
+#endif

pins/pins_f4_nucleo_morpho.h

@@ -0,0 +1,134 @@
+/*
+ *   Copyright (C) 2019,2020 by BG5HHP
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _PINS_F4_NUCLEO_MORPHO_H
+#define _PINS_F4_NUCLEO_MORPHO_H
+
+/*
+Pin definitions for STM32F4 Nucleo boards (ST Morpho header):
+
+PTT      PB13   output           CN10 Pin30
+COSLED   PB14   output           CN10 Pin28
+LED      PA5    output           CN10 Pin11
+COS      PB15   input            CN10 Pin26
+
+DSTAR    PB10   output           CN10 Pin25
+DMR      PB4    output           CN10 Pin27
+YSF      PB5    output           CN10 Pin29
+P25      PB3    output           CN10 Pin31
+NXDN     PA10   output           CN10 Pin33
+POCSAG   PB12   output           CN10 Pin16
+
+MDSTAR   PC4    output           CN10 Pin34
+MDMR     PC5    output           CN10 Pin6
+MYSF     PC2    output           CN7 Pin35
+MP25     PC3    output           CN7 Pin37
+MNXDN    PC6    output           CN10 Pin4
+MPOCSAG  PC8    output           CN10 Pin2
+
+RX       PA0    analog input     CN7 Pin28
+RSSI     PA1    analog input     CN7 Pin30
+TX       PA4    analog output    CN7 Pin32
+
+EXT_CLK  PA15   input            CN7 Pin17
+*/
+
+#define PIN_COS           GPIO_Pin_15
+#define PORT_COS          GPIOB
+#define RCC_Per_COS       RCC_AHB1Periph_GPIOB
+
+#define PIN_PTT           GPIO_Pin_13
+#define PORT_PTT          GPIOB
+#define RCC_Per_PTT       RCC_AHB1Periph_GPIOB
+
+#define PIN_COSLED        GPIO_Pin_14
+#define PORT_COSLED       GPIOB
+#define RCC_Per_COSLED    RCC_AHB1Periph_GPIOB
+
+#define PIN_LED           GPIO_Pin_5
+#define PORT_LED          GPIOA
+#define RCC_Per_LED       RCC_AHB1Periph_GPIOA
+
+#define PIN_P25           GPIO_Pin_3
+#define PORT_P25          GPIOB
+#define RCC_Per_P25       RCC_AHB1Periph_GPIOB
+
+#define PIN_NXDN          GPIO_Pin_10
+#define PORT_NXDN         GPIOA
+#define RCC_Per_NXDN      RCC_AHB1Periph_GPIOA
+
+#define PIN_POCSAG        GPIO_Pin_12
+#define PORT_POCSAG       GPIOB
+#define RCC_Per_POCSAG    RCC_AHB1Periph_GPIOB
+
+#define PIN_DSTAR         GPIO_Pin_10
+#define PORT_DSTAR        GPIOB
+#define RCC_Per_DSTAR     RCC_AHB1Periph_GPIOB
+
+#define PIN_DMR           GPIO_Pin_4
+#define PORT_DMR          GPIOB
+#define RCC_Per_DMR       RCC_AHB1Periph_GPIOB
+
+#define PIN_YSF           GPIO_Pin_5
+#define PORT_YSF          GPIOB
+#define RCC_Per_YSF       RCC_AHB1Periph_GPIOB
+
+#if defined(MODE_PINS)
+#define PIN_MP25          GPIO_Pin_3
+#define PORT_MP25         GPIOC
+#define RCC_Per_MP25      RCC_AHB1Periph_GPIOC
+
+#define PIN_MNXDN         GPIO_Pin_6
+#define PORT_MNXDN        GPIOC
+#define RCC_Per_MNXDN     RCC_AHB1Periph_GPIOC
+
+#define PIN_MDSTAR        GPIO_Pin_4
+#define PORT_MDSTAR       GPIOC
+#define RCC_Per_MDSTAR    RCC_AHB1Periph_GPIOC
+
+#define PIN_MDMR          GPIO_Pin_5
+#define PORT_MDMR         GPIOC
+#define RCC_Per_MDMR      RCC_AHB1Periph_GPIOC
+
+#define PIN_MYSF          GPIO_Pin_2
+#define PORT_MYSF         GPIOC
+#define RCC_Per_MYSF      RCC_AHB1Periph_GPIOC
+
+#define PIN_MPOCSAG       GPIO_Pin_8
+#define PORT_MPOCSAG      GPIOC
+#define RCC_Per_MPOCSAG   RCC_AHB1Periph_GPIOC
+#endif
+
+#define PIN_EXT_CLK       GPIO_Pin_15
+#define SRC_EXT_CLK       GPIO_PinSource15
+#define PORT_EXT_CLK      GPIOA
+
+#define PIN_RX            GPIO_Pin_0
+#define PIN_RX_CH         ADC_Channel_0
+#define PORT_RX           GPIOA
+#define RCC_Per_RX        RCC_AHB1Periph_GPIOA
+
+#define PIN_RSSI          GPIO_Pin_1
+#define PIN_RSSI_CH       ADC_Channel_1
+#define PORT_RSSI         GPIOA
+#define RCC_Per_RSSI      RCC_AHB1Periph_GPIOA
+
+#define PIN_TX            GPIO_Pin_4
+#define PIN_TX_CH         DAC_Channel_1
+
+#endif

pins/pins_f4_pi.h

@@ -0,0 +1,101 @@
+/*
+ *   Copyright (C) 2019,2020 by BG5HHP
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _PINS_F4_PI_H
+#define _PINS_F4_PI_H
+
+/*
+Pin definitions for STM32F4 Pi Board:
+
+PTT      PB13   output
+COSLED   PB14   output
+LED      PB15   output
+COS      PC0    input
+
+DSTAR    PC7    output
+DMR      PC8    output
+YSF      PA8    output
+P25      PC9    output
+NXDN     PB1    output
+POCSAG   PB12   output
+
+RX       PA0    analog input
+RSSI     PA7    analog input
+TX       PA4    analog output
+
+EXT_CLK  PA15   input
+*/
+
+#define PIN_COS           GPIO_Pin_0
+#define PORT_COS          GPIOC
+#define RCC_Per_COS       RCC_AHB1Periph_GPIOC
+
+#define PIN_PTT           GPIO_Pin_13
+#define PORT_PTT          GPIOB
+#define RCC_Per_PTT       RCC_AHB1Periph_GPIOB
+
+#define PIN_COSLED        GPIO_Pin_14
+#define PORT_COSLED       GPIOB
+#define RCC_Per_COSLED    RCC_AHB1Periph_GPIOB
+
+#define PIN_LED           GPIO_Pin_15
+#define PORT_LED          GPIOB
+#define RCC_Per_LED       RCC_AHB1Periph_GPIOB
+
+#define PIN_P25           GPIO_Pin_9
+#define PORT_P25          GPIOC
+#define RCC_Per_P25       RCC_AHB1Periph_GPIOC
+
+#define PIN_NXDN          GPIO_Pin_1
+#define PORT_NXDN         GPIOB
+#define RCC_Per_NXDN      RCC_AHB1Periph_GPIOB
+
+#define PIN_POCSAG        GPIO_Pin_12
+#define PORT_POCSAG       GPIOB
+#define RCC_Per_POCSAG    RCC_AHB1Periph_GPIOB
+
+#define PIN_DSTAR         GPIO_Pin_7
+#define PORT_DSTAR        GPIOC
+#define RCC_Per_DSTAR     RCC_AHB1Periph_GPIOC
+
+#define PIN_DMR           GPIO_Pin_8
+#define PORT_DMR          GPIOC
+#define RCC_Per_DMR       RCC_AHB1Periph_GPIOC
+
+#define PIN_YSF           GPIO_Pin_8
+#define PORT_YSF          GPIOA
+#define RCC_Per_YSF       RCC_AHB1Periph_GPIOA
+
+#define PIN_EXT_CLK       GPIO_Pin_15
+#define SRC_EXT_CLK       GPIO_PinSource15
+#define PORT_EXT_CLK      GPIOA
+
+#define PIN_RX            GPIO_Pin_0
+#define PIN_RX_CH         ADC_Channel_0
+#define PORT_RX           GPIOA
+#define RCC_Per_RX        RCC_AHB1Periph_GPIOA
+
+#define PIN_RSSI          GPIO_Pin_7
+#define PIN_RSSI_CH       ADC_Channel_7
+#define PORT_RSSI         GPIOA
+#define RCC_Per_RSSI      RCC_AHB1Periph_GPIOA
+
+#define PIN_TX            GPIO_Pin_4
+#define PIN_TX_CH         DAC_Channel_1
+
+#endif

pins/pins_f4_rpt_tgo.h

@@ -0,0 +1,134 @@
+/*
+ *   Copyright (C) 2019,2020 by BG5HHP
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _PINS_F4_RPT_TGO_H
+#define _PINS_F4_RPT_TGO_H
+
+/*
+Pin definitions for MMDVM_RPT_Hat Pi-Hat BG4TGO  board::
+
+PTT      PB13   output           CN10 Pin30
+COSLED   PB14   output           CN10 Pin28
+LED      PA5    output           CN10 Pin11
+COS      PB15   input            CN10 Pin26
+
+DSTAR    PB10   output           CN10 Pin25
+DMR      PB4    output           CN10 Pin27
+YSF      PB5    output           CN10 Pin29
+P25      PB3    output           CN10 Pin31
+NXDN     PA10   output           CN10 Pin33
+POCSAG   PB12   output           CN10 Pin16
+
+MDSTAR   PC4    output           CN10 Pin34
+MDMR     PC5    output           CN10 Pin6
+MYSF     PC2    output           CN7 Pin35
+MP25     PC3    output           CN7 Pin37
+MNXDN    PC6    output           CN10 Pin4
+MPOCSAG  PC8    output           CN10 Pin2
+
+RX       PA0    analog input     CN7 Pin28
+RSSI     PA1    analog input     CN7 Pin30
+TX       PA4    analog output    CN7 Pin32
+
+EXT_CLK  PA15   input            CN7 Pin17
+*/
+
+#define PIN_COS           GPIO_Pin_15
+#define PORT_COS          GPIOB
+#define RCC_Per_COS       RCC_AHB1Periph_GPIOB
+
+#define PIN_PTT           GPIO_Pin_13
+#define PORT_PTT          GPIOB
+#define RCC_Per_PTT       RCC_AHB1Periph_GPIOB
+
+#define PIN_COSLED        GPIO_Pin_14
+#define PORT_COSLED       GPIOB
+#define RCC_Per_COSLED    RCC_AHB1Periph_GPIOB
+
+#define PIN_LED           GPIO_Pin_5
+#define PORT_LED          GPIOA
+#define RCC_Per_LED       RCC_AHB1Periph_GPIOA
+
+#define PIN_P25           GPIO_Pin_3
+#define PORT_P25          GPIOB
+#define RCC_Per_P25       RCC_AHB1Periph_GPIOB
+
+#define PIN_NXDN          GPIO_Pin_10
+#define PORT_NXDN         GPIOA
+#define RCC_Per_NXDN      RCC_AHB1Periph_GPIOA
+
+#define PIN_POCSAG        GPIO_Pin_12
+#define PORT_POCSAG       GPIOB
+#define RCC_Per_POCSAG    RCC_AHB1Periph_GPIOB
+
+#define PIN_DSTAR         GPIO_Pin_10
+#define PORT_DSTAR        GPIOB
+#define RCC_Per_DSTAR     RCC_AHB1Periph_GPIOB
+
+#define PIN_DMR           GPIO_Pin_4
+#define PORT_DMR          GPIOB
+#define RCC_Per_DMR       RCC_AHB1Periph_GPIOB
+
+#define PIN_YSF           GPIO_Pin_5
+#define PORT_YSF          GPIOB
+#define RCC_Per_YSF       RCC_AHB1Periph_GPIOB
+
+#if defined(MODE_PINS)
+#define PIN_MP25          GPIO_Pin_3
+#define PORT_MP25         GPIOC
+#define RCC_Per_MP25      RCC_AHB1Periph_GPIOC
+
+#define PIN_MNXDN         GPIO_Pin_6
+#define PORT_MNXDN        GPIOC
+#define RCC_Per_MNXDN     RCC_AHB1Periph_GPIOC
+
+#define PIN_MDSTAR        GPIO_Pin_4
+#define PORT_MDSTAR       GPIOC
+#define RCC_Per_MDSTAR    RCC_AHB1Periph_GPIOC
+
+#define PIN_MDMR          GPIO_Pin_5
+#define PORT_MDMR         GPIOC
+#define RCC_Per_MDMR      RCC_AHB1Periph_GPIOC
+
+#define PIN_MYSF          GPIO_Pin_2
+#define PORT_MYSF         GPIOC
+#define RCC_Per_MYSF      RCC_AHB1Periph_GPIOC
+
+#define PIN_MPOCSAG       GPIO_Pin_8
+#define PORT_MPOCSAG      GPIOC
+#define RCC_Per_MPOCSAG   RCC_AHB1Periph_GPIOC
+#endif
+
+#define PIN_EXT_CLK       GPIO_Pin_15
+#define SRC_EXT_CLK       GPIO_PinSource15
+#define PORT_EXT_CLK      GPIOA
+
+#define PIN_RX            GPIO_Pin_0
+#define PIN_RX_CH         ADC_Channel_0
+#define PORT_RX           GPIOA
+#define RCC_Per_RX        RCC_AHB1Periph_GPIOA
+
+#define PIN_RSSI          GPIO_Pin_1
+#define PIN_RSSI_CH       ADC_Channel_1
+#define PORT_RSSI         GPIOA
+#define RCC_Per_RSSI      RCC_AHB1Periph_GPIOA
+
+#define PIN_TX            GPIO_Pin_4
+#define PIN_TX_CH         DAC_Channel_1
+
+#endif

pins/pins_f4_stm32dvm_v3.h

@@ -0,0 +1,102 @@
+/*
+ *   Copyright (C) 2019,2020 by BG5HHP
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _PINS_F4_STM32DVM_V3_H
+#define _PINS_F4_STM32DVM_V3_H
+
+/*
+Pin definitions for STM32F4 STM32-DVM rev 3 Board:
+
+COS      PB13   input
+PTT      PB12   output
+COSLED   PB4    output
+LED      PB3    output
+
+P25      PB8    output
+NXDN     PB9    output
+DSTAR    PB6    output
+DMR      PB5    output
+YSF      PB7    output
+POCSAG   PC10   output
+
+RX       PB0    analog input
+RSSI     PB1    analog input
+TX       PA4    analog output
+
+EXT_CLK  PA15   input
+*/
+
+#define PIN_COS           GPIO_Pin_13
+#define PORT_COS          GPIOB
+#define RCC_Per_COS       RCC_AHB1Periph_GPIOB
+
+
+#define PIN_PTT           GPIO_Pin_12
+#define PORT_PTT          GPIOB
+#define RCC_Per_PTT       RCC_AHB1Periph_GPIOB
+
+#define PIN_COSLED        GPIO_Pin_4
+#define PORT_COSLED       GPIOB
+#define RCC_Per_COSLED    RCC_AHB1Periph_GPIOB
+
+#define PIN_LED           GPIO_Pin_3
+#define PORT_LED          GPIOB
+#define RCC_Per_LED       RCC_AHB1Periph_GPIOB
+
+#define PIN_P25           GPIO_Pin_8
+#define PORT_P25          GPIOB
+#define RCC_Per_P25       RCC_AHB1Periph_GPIOB
+
+#define PIN_NXDN          GPIO_Pin_9
+#define PORT_NXDN         GPIOB
+#define RCC_Per_NXDN      RCC_AHB1Periph_GPIOB
+
+#define PIN_DSTAR         GPIO_Pin_6
+#define PORT_DSTAR        GPIOB
+#define RCC_Per_DSTAR     RCC_AHB1Periph_GPIOB
+
+#define PIN_DMR           GPIO_Pin_5
+#define PORT_DMR          GPIOB
+#define RCC_Per_DMR       RCC_AHB1Periph_GPIOB
+
+#define PIN_YSF           GPIO_Pin_7
+#define PORT_YSF          GPIOB
+#define RCC_Per_YSF       RCC_AHB1Periph_GPIOB
+
+#define PIN_POCSAG        GPIO_Pin_10
+#define PORT_POCSAG       GPIOC
+#define RCC_Per_POCSAG    RCC_AHB1Periph_GPIOC
+
+#define PIN_EXT_CLK       GPIO_Pin_15
+#define SRC_EXT_CLK       GPIO_PinSource15
+#define PORT_EXT_CLK      GPIOA
+
+#define PIN_RX            GPIO_Pin_0
+#define PIN_RX_CH         ADC_Channel_8
+#define PORT_RX           GPIOB
+#define RCC_Per_RX        RCC_AHB1Periph_GPIOB
+
+#define PIN_RSSI          GPIO_Pin_1
+#define PIN_RSSI_CH       ADC_Channel_9
+#define PORT_RSSI         GPIOB
+#define RCC_Per_RSSI      RCC_AHB1Periph_GPIOB
+
+#define PIN_TX            GPIO_Pin_4
+#define PIN_TX_CH         DAC_Channel_1
+
+#endif

pins/pins_f4_stm32eda.h

@@ -0,0 +1,108 @@
+/*
+ *   Copyright (C) 2019,2020 by BG5HHP
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _PINS_F4_STM32EDA
+#define _PINS_F4_STM32EDA
+
+/*
+Pin definitions for STM32F4 STM32-DVM-MTR2K & STM32-DVM-MASTR3:
+
+COS      PB13   input
+PTT      PB12   output
+COSLED   PB4    output
+LED      PB3    output
+
+P25      PB8    output
+NXDN     PB9    output
+DSTAR    PB6    output
+DMR      PB5    output
+YSF      PB7    output
+POCSAG   PC10   output
+FM       PC11   output
+
+RX       PB0    analog input
+RSSI     PB1    analog input
+TX       PA4    analog output
+
+EXT_CLK  PA15   input
+*/
+
+#define PIN_COS           GPIO_Pin_13
+#define PORT_COS          GPIOB
+#define RCC_Per_COS       RCC_AHB1Periph_GPIOB
+
+
+#define PIN_PTT           GPIO_Pin_12
+#define PORT_PTT          GPIOB
+#define RCC_Per_PTT       RCC_AHB1Periph_GPIOB
+
+#define PIN_COSLED        GPIO_Pin_4
+#define PORT_COSLED       GPIOB
+#define RCC_Per_COSLED    RCC_AHB1Periph_GPIOB
+
+#define PIN_LED           GPIO_Pin_3
+#define PORT_LED          GPIOB
+#define RCC_Per_LED       RCC_AHB1Periph_GPIOB
+
+#define PIN_P25           GPIO_Pin_8
+#define PORT_P25          GPIOB
+#define RCC_Per_P25       RCC_AHB1Periph_GPIOB
+
+#define PIN_NXDN          GPIO_Pin_9
+#define PORT_NXDN         GPIOB
+#define RCC_Per_NXDN      RCC_AHB1Periph_GPIOB
+
+#define PIN_DSTAR         GPIO_Pin_6
+#define PORT_DSTAR        GPIOB
+#define RCC_Per_DSTAR     RCC_AHB1Periph_GPIOB
+
+#define PIN_DMR           GPIO_Pin_5
+#define PORT_DMR          GPIOB
+#define RCC_Per_DMR       RCC_AHB1Periph_GPIOB
+
+#define PIN_YSF           GPIO_Pin_7
+#define PORT_YSF          GPIOB
+#define RCC_Per_YSF       RCC_AHB1Periph_GPIOB
+
+#define PIN_POCSAG        GPIO_Pin_10
+#define PORT_POCSAG       GPIOC
+#define RCC_Per_POCSAG    RCC_AHB1Periph_GPIOC
+
+#define PIN_FM            GPIO_Pin_11
+#define PORT_FM           GPIOC
+#define RCC_Per_FM        RCC_AHB1Periph_GPIOC
+
+#define PIN_EXT_CLK       GPIO_Pin_15
+#define SRC_EXT_CLK       GPIO_PinSource15
+#define PORT_EXT_CLK      GPIOA
+
+#define PIN_RX            GPIO_Pin_0
+#define PIN_RX_CH         ADC_Channel_8
+#define PORT_RX           GPIOB
+#define RCC_Per_RX        RCC_AHB1Periph_GPIOB
+
+#define PIN_RSSI          GPIO_Pin_1
+#define PIN_RSSI_CH       ADC_Channel_9
+#define PORT_RSSI         GPIOB
+#define RCC_Per_RSSI      RCC_AHB1Periph_GPIOB
+
+#define PIN_TX            GPIO_Pin_4
+#define PIN_TX_CH         DAC_Channel_1
+
+#endif
+

pins/pins_f7_f7m.h

@@ -0,0 +1,101 @@
+/*
+ *   Copyright (C) 2019,2020 by BG5HHP
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _PINS_F7_F7M_H
+#define _PINS_F7_F7M_H
+
+/*
+Pin definitions for MMDVM-F7M Pi-Hat F0DEI board:
+
+PTT      PB13   output
+COSLED   PB14   output
+LED      PB15   output
+COS      PC0    input
+
+DSTAR    PC7    output
+DMR      PC8    output
+YSF      PA8    output
+P25      PC9    output
+NXDN     PB1    output
+POCSAG   PB12   output
+
+RX       PA0    analog input
+RSSI     PA7    analog input
+TX       PA4    analog output
+
+EXT_CLK  PA15   input
+*/
+
+#define PIN_COS           GPIO_Pin_0
+#define PORT_COS          GPIOC
+#define RCC_Per_COS       RCC_AHB1Periph_GPIOC
+
+#define PIN_PTT           GPIO_Pin_13
+#define PORT_PTT          GPIOB
+#define RCC_Per_PTT       RCC_AHB1Periph_GPIOB
+
+#define PIN_COSLED        GPIO_Pin_14
+#define PORT_COSLED       GPIOB
+#define RCC_Per_COSLED    RCC_AHB1Periph_GPIOB
+
+#define PIN_LED           GPIO_Pin_15
+#define PORT_LED          GPIOB
+#define RCC_Per_LED       RCC_AHB1Periph_GPIOB
+
+#define PIN_P25           GPIO_Pin_9
+#define PORT_P25          GPIOC
+#define RCC_Per_P25       RCC_AHB1Periph_GPIOC
+
+#define PIN_NXDN          GPIO_Pin_1
+#define PORT_NXDN         GPIOB
+#define RCC_Per_NXDN      RCC_AHB1Periph_GPIOB
+
+#define PIN_POCSAG        GPIO_Pin_12
+#define PORT_POCSAG       GPIOB
+#define RCC_Per_POCSAG    RCC_AHB1Periph_GPIOB
+
+#define PIN_DSTAR         GPIO_Pin_7
+#define PORT_DSTAR        GPIOC
+#define RCC_Per_DSTAR     RCC_AHB1Periph_GPIOC
+
+#define PIN_DMR           GPIO_Pin_8
+#define PORT_DMR          GPIOC
+#define RCC_Per_DMR       RCC_AHB1Periph_GPIOC
+
+#define PIN_YSF           GPIO_Pin_8
+#define PORT_YSF          GPIOA
+#define RCC_Per_YSF       RCC_AHB1Periph_GPIOA
+
+#define PIN_EXT_CLK       GPIO_Pin_15
+#define SRC_EXT_CLK       GPIO_PinSource15
+#define PORT_EXT_CLK      GPIOA
+
+#define PIN_RX            GPIO_Pin_0
+#define PIN_RX_CH         ADC_Channel_0
+#define PORT_RX           GPIOA
+#define RCC_Per_RX        RCC_AHB1Periph_GPIOA
+
+#define PIN_RSSI          GPIO_Pin_7
+#define PIN_RSSI_CH       ADC_Channel_7
+#define PORT_RSSI         GPIOA
+#define RCC_Per_RSSI      RCC_AHB1Periph_GPIOA
+
+#define PIN_TX            GPIO_Pin_4
+#define PIN_TX_CH         DAC_Channel_1
+
+#endif

pins/pins_f7_nucleo.h

@@ -0,0 +1,129 @@
+/*
+ *   Copyright (C) 2019,2020 by BG5HHP
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _PINS_F7_NUCLEO_H
+#define _PINS_F7_NUCLEO_H
+
+/*
+Pin definitions for STM32F7 Nucleo boards (ST Morpho header):
+
+PTT      PB13   output           CN12 Pin30
+COSLED   PB14   output           CN12 Pin28
+LED      PA5    output           CN12 Pin11
+COS      PB15   input            CN12 Pin26
+
+DSTAR    PB10   output           CN12 Pin25
+DMR      PB4    output           CN12 Pin27
+YSF      PB5    output           CN12 Pin29
+P25      PB3    output           CN12 Pin31
+NXDN     PA10   output           CN12 Pin33
+POCSAG   PB12   output           CN12 Pin16
+
+MDSTAR   PC4    output           CN12 Pin34
+MDMR     PC5    output           CN12 Pin6
+MYSF     PC2    output           CN11 Pin35
+MP25     PC3    output           CN11 Pin37
+MNXDN    PC6    output           CN12 Pin4
+
+RX       PA0    analog input     CN11 Pin28
+RSSI     PA1    analog input     CN11 Pin30
+TX       PA4    analog output    CN11 Pin32
+
+EXT_CLK  PA15   input            CN11 Pin17
+*/
+
+#define PIN_COS           GPIO_Pin_15
+#define PORT_COS          GPIOB
+#define RCC_Per_COS       RCC_AHB1Periph_GPIOB
+
+#define PIN_PTT           GPIO_Pin_13
+#define PORT_PTT          GPIOB
+#define RCC_Per_PTT       RCC_AHB1Periph_GPIOB
+
+#define PIN_COSLED        GPIO_Pin_14
+#define PORT_COSLED       GPIOB
+#define RCC_Per_COSLED    RCC_AHB1Periph_GPIOB
+
+#define PIN_LED           GPIO_Pin_5
+#define PORT_LED          GPIOA
+#define RCC_Per_LED       RCC_AHB1Periph_GPIOA
+
+#define PIN_P25           GPIO_Pin_3
+#define PORT_P25          GPIOB
+#define RCC_Per_P25       RCC_AHB1Periph_GPIOB
+
+#define PIN_NXDN          GPIO_Pin_10
+#define PORT_NXDN         GPIOA
+#define RCC_Per_NXDN      RCC_AHB1Periph_GPIOA
+
+#define PIN_POCSAG        GPIO_Pin_12
+#define PORT_POCSAG       GPIOB
+#define RCC_Per_POCSAG    RCC_AHB1Periph_GPIOB
+
+#define PIN_DSTAR         GPIO_Pin_10
+#define PORT_DSTAR        GPIOB
+#define RCC_Per_DSTAR     RCC_AHB1Periph_GPIOB
+
+#define PIN_DMR           GPIO_Pin_4
+#define PORT_DMR          GPIOB
+#define RCC_Per_DMR       RCC_AHB1Periph_GPIOB
+
+#define PIN_YSF           GPIO_Pin_5
+#define PORT_YSF          GPIOB
+#define RCC_Per_YSF       RCC_AHB1Periph_GPIOB
+
+#if defined(MODE_PINS)
+#define PIN_MP25          GPIO_Pin_3
+#define PORT_MP25         GPIOC
+#define RCC_Per_MP25      RCC_AHB1Periph_GPIOC
+
+#define PIN_MNXDN         GPIO_Pin_6
+#define PORT_MNXDN        GPIOC
+#define RCC_Per_MNXDN     RCC_AHB1Periph_GPIOC
+
+#define PIN_MDSTAR        GPIO_Pin_4
+#define PORT_MDSTAR       GPIOC
+#define RCC_Per_MDSTAR    RCC_AHB1Periph_GPIOC
+
+#define PIN_MDMR          GPIO_Pin_5
+#define PORT_MDMR         GPIOC
+#define RCC_Per_MDMR      RCC_AHB1Periph_GPIOC
+
+#define PIN_MYSF          GPIO_Pin_2
+#define PORT_MYSF         GPIOC
+#define RCC_Per_MYSF      RCC_AHB1Periph_GPIOC
+#endif
+
+#define PIN_EXT_CLK       GPIO_Pin_15
+#define SRC_EXT_CLK       GPIO_PinSource15
+#define PORT_EXT_CLK      GPIOA
+
+#define PIN_RX            GPIO_Pin_0
+#define PIN_RX_CH         ADC_Channel_0
+#define PORT_RX           GPIOA
+#define RCC_Per_RX        RCC_AHB1Periph_GPIOA
+
+#define PIN_RSSI          GPIO_Pin_1
+#define PIN_RSSI_CH       ADC_Channel_1
+#define PORT_RSSI         GPIOA
+#define RCC_Per_RSSI      RCC_AHB1Periph_GPIOA
+
+#define PIN_TX            GPIO_Pin_4
+#define PIN_TX_CH         DAC_Channel_1
+
+#endif

pins/pins_f7_pi.h

@@ -0,0 +1,101 @@
+/*
+ *   Copyright (C) 2019,2020 by BG5HHP
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _PINS_F7_PI_H
+#define _PINS_F7_PI_H
+
+/*
+Pin definitions for STM32F722 Pi Board:
+
+PTT      PB13   output
+COSLED   PB14   output
+LED      PB15   output
+COS      PC0    input
+
+DSTAR    PC7    output
+DMR      PC8    output
+YSF      PA8    output
+P25      PC9    output
+NXDN     PB1    output
+POCSAG   PB12   output
+
+RX       PA0    analog input
+RSSI     PA7    analog input
+TX       PA4    analog output
+
+EXT_CLK  PA15   input
+*/
+
+#define PIN_COS           GPIO_Pin_0
+#define PORT_COS          GPIOC
+#define RCC_Per_COS       RCC_AHB1Periph_GPIOC
+
+#define PIN_PTT           GPIO_Pin_13
+#define PORT_PTT          GPIOB
+#define RCC_Per_PTT       RCC_AHB1Periph_GPIOB
+
+#define PIN_COSLED        GPIO_Pin_14
+#define PORT_COSLED       GPIOB
+#define RCC_Per_COSLED    RCC_AHB1Periph_GPIOB
+
+#define PIN_LED           GPIO_Pin_15
+#define PORT_LED          GPIOB
+#define RCC_Per_LED       RCC_AHB1Periph_GPIOB
+
+#define PIN_P25           GPIO_Pin_9
+#define PORT_P25          GPIOC
+#define RCC_Per_P25       RCC_AHB1Periph_GPIOC
+
+#define PIN_NXDN          GPIO_Pin_1
+#define PORT_NXDN         GPIOB
+#define RCC_Per_NXDN      RCC_AHB1Periph_GPIOB
+
+#define PIN_POCSAG        GPIO_Pin_12
+#define PORT_POCSAG       GPIOB
+#define RCC_Per_POCSAG    RCC_AHB1Periph_GPIOB
+
+#define PIN_DSTAR         GPIO_Pin_7
+#define PORT_DSTAR        GPIOC
+#define RCC_Per_DSTAR     RCC_AHB1Periph_GPIOC
+
+#define PIN_DMR           GPIO_Pin_8
+#define PORT_DMR          GPIOC
+#define RCC_Per_DMR       RCC_AHB1Periph_GPIOC
+
+#define PIN_YSF           GPIO_Pin_8
+#define PORT_YSF          GPIOA
+#define RCC_Per_YSF       RCC_AHB1Periph_GPIOA
+
+#define PIN_EXT_CLK       GPIO_Pin_15
+#define SRC_EXT_CLK       GPIO_PinSource15
+#define PORT_EXT_CLK      GPIOA
+
+#define PIN_RX            GPIO_Pin_0
+#define PIN_RX_CH         ADC_Channel_0
+#define PORT_RX           GPIOA
+#define RCC_Per_RX        RCC_AHB1Periph_GPIOA
+
+#define PIN_RSSI          GPIO_Pin_7
+#define PIN_RSSI_CH       ADC_Channel_7
+#define PORT_RSSI         GPIOA
+#define RCC_Per_RSSI      RCC_AHB1Periph_GPIOA
+
+#define PIN_TX            GPIO_Pin_4
+#define PIN_TX_CH         DAC_Channel_1
+
+#endif

pins/pins_f7_rpt_hat.h

@@ -0,0 +1,144 @@
+/*
+ *   Copyright (C) 2019,2020 by BG5HHP
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _PINS_F7_RPT_HAT_H
+#define _PINS_F7_RPT_HAT_H
+
+/*
+Pin definitions for MMDVM_RPT_Hat Pi-Hat F0DEI DB9MAT DF2ET board:
+
+PTT      PB14   output
+COSLED   PB13   output
+LED      PB12   output
+COS      PC0    input
+
+DSTAR    PB15   output
+DMR      PC6    output
+YSF      PC7    output
+P25      PC8    output
+NXDN     PC9    output
+POCSAG   PA8    output
+FM       PA11   output
+
+MDSTAR   PC1    output
+MDMR     PC2    output
+MYSF     PC3    output
+MP25     PC4    output
+MNXDN    PC10   output
+MPOCSAG  PC11   output
+MFM      PC13   output
+
+RX       PA0    analog input
+RSSI     PA7    analog input
+TX       PA4    analog output
+
+EXT_CLK  PA15   input
+*/
+
+#define PIN_COS           GPIO_Pin_0
+#define PORT_COS          GPIOC
+#define RCC_Per_COS       RCC_AHB1Periph_GPIOC
+
+#define PIN_PTT           GPIO_Pin_14
+#define PORT_PTT          GPIOB
+#define RCC_Per_PTT       RCC_AHB1Periph_GPIOB
+
+#define PIN_COSLED        GPIO_Pin_13
+#define PORT_COSLED       GPIOB
+#define RCC_Per_COSLED    RCC_AHB1Periph_GPIOB
+
+#define PIN_LED           GPIO_Pin_12
+#define PORT_LED          GPIOB
+#define RCC_Per_LED       RCC_AHB1Periph_GPIOB
+
+#define PIN_P25           GPIO_Pin_8
+#define PORT_P25          GPIOC
+#define RCC_Per_P25       RCC_AHB1Periph_GPIOC
+
+#define PIN_NXDN          GPIO_Pin_9
+#define PORT_NXDN         GPIOC
+#define RCC_Per_NXDN      RCC_AHB1Periph_GPIOC
+
+#define PIN_POCSAG        GPIO_Pin_8
+#define PORT_POCSAG       GPIOA
+#define RCC_Per_POCSAG    RCC_AHB1Periph_GPIOA
+
+#define PIN_FM            GPIO_Pin_11
+#define PORT_FM           GPIOA
+#define RCC_Per_FM        RCC_AHB1Periph_GPIOA
+
+#define PIN_DSTAR         GPIO_Pin_15
+#define PORT_DSTAR        GPIOB
+#define RCC_Per_DSTAR     RCC_AHB1Periph_GPIOB
+
+#define PIN_DMR           GPIO_Pin_6
+#define PORT_DMR          GPIOC
+#define RCC_Per_DMR       RCC_AHB1Periph_GPIOC
+
+#define PIN_YSF           GPIO_Pin_7
+#define PORT_YSF          GPIOC
+#define RCC_Per_YSF       RCC_AHB1Periph_GPIOC
+
+#if defined(MODE_PINS)
+#define PIN_MP25          GPIO_Pin_4
+#define PORT_MP25         GPIOC
+#define RCC_Per_MP25      RCC_AHB1Periph_GPIOC
+
+#define PIN_MNXDN         GPIO_Pin_10
+#define PORT_MNXDN        GPIOC
+#define RCC_Per_MNXDN     RCC_AHB1Periph_GPIOC
+
+#define PIN_MDSTAR        GPIO_Pin_1
+#define PORT_MDSTAR       GPIOC
+#define RCC_Per_MDSTAR    RCC_AHB1Periph_GPIOC
+
+#define PIN_MDMR          GPIO_Pin_2
+#define PORT_MDMR         GPIOC
+#define RCC_Per_MDMR      RCC_AHB1Periph_GPIOC
+
+#define PIN_MYSF          GPIO_Pin_3
+#define PORT_MYSF         GPIOC
+#define RCC_Per_MYSF      RCC_AHB1Periph_GPIOC
+
+#define PIN_MPOCSAG       GPIO_Pin_11
+#define PORT_MPOCSAG      GPIOC
+#define RCC_Per_MPOCSAG   RCC_AHB1Periph_GPIOC
+
+#define PIN_MFM           GPIO_Pin_13
+#define PORT_MFM          GPIOC
+#define RCC_Per_MFM       RCC_AHB1Periph_GPIOC
+#endif
+
+#define PIN_EXT_CLK       GPIO_Pin_15
+#define SRC_EXT_CLK       GPIO_PinSource15
+#define PORT_EXT_CLK      GPIOA
+
+#define PIN_RX            GPIO_Pin_0
+#define PIN_RX_CH         ADC_Channel_0
+#define PORT_RX           GPIOA
+#define RCC_Per_RX        RCC_AHB1Periph_GPIOA
+
+#define PIN_RSSI          GPIO_Pin_7
+#define PIN_RSSI_CH       ADC_Channel_7
+#define PORT_RSSI         GPIOA
+#define RCC_Per_RSSI      RCC_AHB1Periph_GPIOA
+
+#define PIN_TX            GPIO_Pin_4
+#define PIN_TX_CH         DAC_Channel_1
+
+#endif