Revert "Make CTCSS threshold RXLevel and RXBoost agnostic"

Make CTCSS threshold RXLevel and RXBoost agnostic

.gitignore

@@ -1,6 +1,5 @@
 *.o
 obj/
 bin/
-STM32F4XX_Lib/
 GitVersion.h
 build/

.gitmodules

@@ -0,0 +1,9 @@
+[submodule "STM32F4XX_Lib"]
+	path = STM32F4XX_Lib
+	url = https://github.com/juribeparada/STM32F4XX_Lib.git
+[submodule "STM32F7XX_Lib"]
+	path = STM32F7XX_Lib
+	url = https://github.com/juribeparada/STM32F7XX_Lib.git
+[submodule "STM32F10X_Lib"]
+	path = STM32F10X_Lib
+	url = https://github.com/shawnchain/STM32F10X_Lib.git

CalPOCSAG.cpp

@@ -0,0 +1,49 @@
+/*
+ *   Copyright (C) 2019 by Florian Wolters DF2ET
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "Config.h"
+#include "Globals.h"
+#include "CalPOCSAG.h"
+
+
+CCalPOCSAG::CCalPOCSAG() :
+m_state(POCSAGCAL_IDLE)
+{
+}
+
+void CCalPOCSAG::process()
+{
+  if (m_state == POCSAGCAL_IDLE)
+    return;
+
+  uint16_t space = io.getSpace();
+  if (space <= 165U)
+    return;
+
+  pocsagTX.writeByte(0xAAU);
+}
+
+uint8_t CCalPOCSAG::write(const uint8_t* data, uint8_t length)
+{
+  if (length != 1U)
+    return 4U;
+
+  m_state = data[0U] == 1U ? POCSAGCAL_TX : POCSAGCAL_IDLE;
+
+  return 0U;
+}

CalPOCSAG.h

@@ -0,0 +1,41 @@
+/*
+ *   Copyright (C) 2019 by Florian Wolters DF2ET
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if !defined(CALPOCSAG_H)
+#define  CALPOCSAG_H
+
+#include "Config.h"
+
+enum POCSAGCAL {
+  POCSAGCAL_IDLE,
+  POCSAGCAL_TX
+};
+
+class CCalPOCSAG {
+public:
+  CCalPOCSAG();
+
+  void process();
+
+  uint8_t write(const uint8_t* data, uint8_t length);
+
+private:
+  POCSAGCAL m_state;
+};
+
+#endif

Config.h

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2015,2016,2017 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2015,2016,2017,2018,2020 by Jonathan Naylor G4KLX
  *
  *   This program is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by
@@ -38,17 +38,19 @@
 // Allow the use of the COS line to lockout the modem
 // #define USE_COS_AS_LOCKOUT
 
-// Use pins to output the current mode
+// Use pins to output the current mode via LEDs
-// #define ARDUINO_MODE_PINS
+// #define MODE_LEDS
 
 // For the original Arduino Due pin layout
 // #define ARDUINO_DUE_PAPA
 
+#if defined(STM32F1)
+// For the SQ6POG board
+#define STM32F1_POG
+#else
 // For the ZUM V1.0 and V1.0.1 boards pin layout
 #define ARDUINO_DUE_ZUM_V10
-
+#endif
-// For the SQ6POG board
-// #define STM32F1_POG
 
 // For the SP8NTH board
 // #define ARDUINO_DUE_NTH
@@ -57,8 +59,11 @@
 // #define STM32F4_NUCLEO_MORPHO_HEADER
 // #define STM32F4_NUCLEO_ARDUINO_HEADER
 
-// Use separate mode pins to switch external filters/bandwidth for example
+// Use separate mode pins to switch external channel/filters/bandwidth for example
-// #define STM32F4_NUCLEO_MODE_PINS
+// #define MODE_PINS
+
+// For the VK6MST Pi3 Shield communicating over i2c. i2c address & speed defined in i2cTeensy.cpp
+// #define VK6MST_TEENSY_PI3_SHIELD_I2C
 
 // Pass RSSI information to the host
 // #define SEND_RSSI_DATA
@@ -66,4 +71,20 @@
 // Use the modem as a serial repeater for Nextion displays
 // #define SERIAL_REPEATER
 
+// To reduce CPU load, you can remove the DC blocker by commenting out the next line
+#define USE_DCBLOCKER
+
+// Constant Service LED once repeater is running 
+// Do not use if employing an external hardware watchdog 
+// #define CONSTANT_SRV_LED
+
+// Use the YSF and P25 LEDs for NXDN
+// #define USE_ALTERNATE_NXDN_LEDS
+
+// Use the D-Star and DMR LEDs for POCSAG
+// #define USE_ALTERNATE_POCSAG_LEDS
+
+// Use the D-Star and YSF LEDs for FM
+// #define USE_ALTERNATE_FM_LEDS
+
 #endif

DMRDMOTX.cpp

@@ -38,6 +38,13 @@ const uint8_t BIT_MASK_TABLE[] = {0x80U, 0x40U, 0x20U, 0x10U, 0x08U, 0x04U, 0x02
 #define WRITE_BIT1(p,i,b) p[(i)>>3] = (b) ? (p[(i)>>3] | BIT_MASK_TABLE[(i)&7]) : (p[(i)>>3] & ~BIT_MASK_TABLE[(i)&7])
 #define READ_BIT1(p,i)    (p[(i)>>3] & BIT_MASK_TABLE[(i)&7])
 
+// PR FILL pattern
+const uint8_t PR_FILL[] =
+        {0x63U, 0xEAU, 0x00U, 0x76U, 0x6CU, 0x76U, 0xC4U, 0x52U, 0xC8U, 0x78U,
+         0x09U, 0x2DU, 0xB8U, 0x79U, 0x27U, 0x57U, 0x9BU, 0x31U, 0xBCU, 0x3EU,
+         0xEAU, 0x45U, 0xC3U, 0x30U, 0x49U, 0x17U, 0x93U, 0xAEU, 0x8BU, 0x6DU,
+         0xA4U, 0xA5U, 0xADU, 0xA2U, 0xF1U, 0x35U, 0xB5U, 0x3CU, 0x1EU};
+
 const uint8_t DMR_SYNC = 0x5FU;
 
 CDMRDMOTX::CDMRDMOTX() :
@@ -66,11 +73,11 @@ void CDMRDMOTX::process()
 
       m_poLen = m_txDelay;
     } else {
-      for (unsigned int i = 0U; i < 72U; i++)
-        m_poBuffer[i] = DMR_SYNC;
-
       for (unsigned int i = 0U; i < DMR_FRAME_LENGTH_BYTES; i++)
-        m_poBuffer[i + 39U] = m_fifo.get();
+        m_poBuffer[i] = m_fifo.get();
+
+      for (unsigned int i = 0U; i < 39U; i++)
+        m_poBuffer[i + DMR_FRAME_LENGTH_BYTES] = PR_FILL[i];
 
       m_poLen = 72U;
     }

FM.cpp

@@ -0,0 +1,399 @@
+/*
+ *   Copyright (C) 2020 by Jonathan Naylor G4KLX
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "Config.h"
+#include "Globals.h"
+#include "FM.h"
+
+CFM::CFM() :
+m_callsign(),
+m_rfAck(),
+m_ctcssRX(),
+m_ctcssTX(),
+m_timeoutTone(),
+m_state(FS_LISTENING),
+m_callsignAtStart(false),
+m_callsignAtEnd(false),
+m_callsignTimer(),
+m_timeoutTimer(),
+m_holdoffTimer(),
+m_kerchunkTimer(),
+m_ackMinTimer(),
+m_ackDelayTimer(),
+m_hangTimer(),
+m_filterStage1(  724,   1448,   724, 32768, -37895, 21352),
+m_filterStage2(32768,      0,-32768, 32768, -50339, 19052),
+m_filterStage3(32768, -65536, 32768, 32768, -64075, 31460),
+m_blanking(),
+m_useCOS(true),
+m_rxBoost(1U)
+{
+}
+
+void CFM::samples(bool cos, q15_t* samples, uint8_t length)
+{
+  if (!m_useCOS)
+    cos = true;
+
+  uint8_t i = 0U;
+  for (; i < length; i++) {
+    q15_t currentSample = samples[i];//save to a local variable to avoid indirection on every access
+
+    CTCSSState ctcssState = m_ctcssRX.process(currentSample);
+
+    if (CTCSS_NOT_READY(ctcssState) && m_modemState != STATE_FM) {
+      //Not enough samples to determine if you have CTCSS, just carry on
+      continue;
+    } else if (CTCSS_READY(ctcssState) && m_modemState != STATE_FM) {
+      //we had enough samples for CTCSS and we are in some other mode than FM
+      bool validCTCSS = CTCSS_VALID(ctcssState);
+      stateMachine(validCTCSS && cos, i + 1U);
+      if (m_modemState != STATE_FM)
+        continue;
+    } else if (CTCSS_READY(ctcssState) && m_modemState == STATE_FM) {
+      //We had enough samples for CTCSS and we are in FM mode, trigger the state machine
+      bool validCTCSS = CTCSS_VALID(ctcssState);
+      stateMachine(validCTCSS && cos, i + 1U);
+      if (m_modemState != STATE_FM)
+        break;
+    } else if (CTCSS_NOT_READY(ctcssState) && m_modemState == STATE_FM && i == length - 1) {
+      //Not enough samples for CTCSS but we already are in FM, trigger the state machine
+      //but do not trigger the state machine on every single sample, save CPU!
+        bool validCTCSS = CTCSS_VALID(ctcssState);
+        stateMachine(validCTCSS && cos, i + 1U);
+    }
+    
+    // Only let audio through when relaying audio
+    if (m_state == FS_RELAYING || m_state == FS_KERCHUNK)
+      currentSample = m_blanking.process(currentSample);
+    else
+      currentSample = 0U;
+
+    currentSample *= m_rxBoost;
+
+    if (!m_callsign.isRunning())
+      currentSample += m_rfAck.getHighAudio();
+    
+    if (!m_rfAck.isRunning()) {
+      if (m_state == FS_LISTENING)
+        currentSample += m_callsign.getHighAudio();
+      else
+        currentSample += m_callsign.getLowAudio();
+    }
+
+    if (!m_callsign.isRunning() && !m_rfAck.isRunning())
+      currentSample += m_timeoutTone.getAudio();
+
+    currentSample = q15_t(m_filterStage3.filter(m_filterStage2.filter(m_filterStage1.filter(currentSample))));
+
+    currentSample += m_ctcssTX.getAudio();
+
+    samples[i] = currentSample;
+  }
+
+  if (m_modemState == STATE_FM)
+    io.write(STATE_FM, samples, i);//only write the actual number of processed samples to IO
+}
+
+void CFM::process()
+{
+}
+
+void CFM::reset()
+{
+  m_ctcssRX.reset();
+}
+
+uint8_t CFM::setCallsign(const char* callsign, uint8_t speed, uint16_t frequency, uint8_t time, uint8_t holdoff, uint8_t highLevel, uint8_t lowLevel, bool callsignAtStart, bool callsignAtEnd)
+{
+  m_callsignAtStart = callsignAtStart;
+  m_callsignAtEnd   = callsignAtEnd;
+
+  uint16_t holdoffTime  = holdoff * 60U;
+  uint16_t callsignTime = time * 60U;
+
+  m_holdoffTimer.setTimeout(holdoffTime, 0U);
+  m_callsignTimer.setTimeout(callsignTime, 0U);
+
+  if (holdoffTime > 0U)
+    m_holdoffTimer.start();
+
+  return m_callsign.setParams(callsign, speed, frequency, highLevel, lowLevel);
+}
+
+uint8_t CFM::setAck(const char* rfAck, uint8_t speed, uint16_t frequency, uint8_t minTime, uint16_t delay, uint8_t level)
+{
+  m_ackDelayTimer.setTimeout(0U, delay);
+  m_ackMinTimer.setTimeout(minTime, 0U);
+
+  return m_rfAck.setParams(rfAck, speed, frequency, level, level);
+}
+
+uint8_t CFM::setMisc(uint16_t timeout, uint8_t timeoutLevel, uint8_t ctcssFrequency, uint8_t ctcssThreshold, uint8_t ctcssLevel, uint8_t kerchunkTime, uint8_t hangTime, bool useCOS, uint8_t rxBoost, uint8_t maxDev)
+{
+  m_useCOS  = useCOS;
+  m_rxBoost = q15_t(rxBoost);
+
+  m_timeoutTimer.setTimeout(timeout, 0U);
+  m_kerchunkTimer.setTimeout(kerchunkTime, 0U);
+  m_hangTimer.setTimeout(hangTime, 0U);
+
+  m_timeoutTone.setParams(timeoutLevel);
+  m_blanking.setParams(maxDev, timeoutLevel);
+
+  uint8_t ret = m_ctcssRX.setParams(ctcssFrequency, ctcssThreshold);
+  if (ret != 0U)
+    return ret;
+
+  return m_ctcssTX.setParams(ctcssFrequency, ctcssLevel);
+}
+
+void CFM::stateMachine(bool validSignal, uint8_t length)
+{
+  m_callsignTimer.clock(length);
+  m_timeoutTimer.clock(length);
+  m_holdoffTimer.clock(length);
+  m_kerchunkTimer.clock(length);
+  m_ackMinTimer.clock(length);
+  m_ackDelayTimer.clock(length);
+  m_hangTimer.clock(length);
+
+  switch (m_state) {
+    case FS_LISTENING:
+      listeningState(validSignal);
+      break;
+    case FS_KERCHUNK:
+      kerchunkState(validSignal);
+      break;
+    case FS_RELAYING:
+      relayingState(validSignal);
+      break;
+    case FS_RELAYING_WAIT:
+      relayingWaitState(validSignal);
+      break;
+    case FS_TIMEOUT:
+      timeoutState(validSignal);
+      break;
+    case FS_TIMEOUT_WAIT:
+      timeoutWaitState(validSignal);
+      break;
+    case FS_HANG:
+      hangState(validSignal);
+      break;
+    default:
+      break;
+  }
+
+  if (m_state == FS_LISTENING && m_modemState == STATE_FM) {
+    if (!m_callsign.isRunning() && !m_rfAck.isRunning()) {
+      DEBUG1("Change to STATE_IDLE");
+      m_modemState = STATE_IDLE;
+      m_callsignTimer.stop();
+      m_timeoutTimer.stop();
+      m_kerchunkTimer.stop();
+      m_ackMinTimer.stop();
+      m_ackDelayTimer.stop();
+      m_hangTimer.stop();
+    }
+  }
+}
+
+void CFM::listeningState(bool validSignal)
+{
+  if (validSignal) {
+    if (m_kerchunkTimer.getTimeout() > 0U) {
+      DEBUG1("State to KERCHUNK");
+      m_state = FS_KERCHUNK;
+      m_kerchunkTimer.start();
+    } else {
+      DEBUG1("State to RELAYING");
+      m_state = FS_RELAYING;
+      if (m_callsignAtStart)
+        sendCallsign();
+    }
+
+    beginRelaying();
+
+    m_callsignTimer.start();
+
+    DEBUG1("Change to STATE_FM");
+    m_modemState = STATE_FM;
+  }
+}
+
+void CFM::kerchunkState(bool validSignal)
+{
+  if (validSignal) {
+    if (m_kerchunkTimer.hasExpired()) {
+      DEBUG1("State to RELAYING");
+      m_state = FS_RELAYING;
+      m_kerchunkTimer.stop();
+    }
+  } else {
+    DEBUG1("State to LISTENING");
+    m_state = FS_LISTENING;
+    m_kerchunkTimer.stop();
+    m_timeoutTimer.stop();
+    m_ackMinTimer.stop();
+    m_callsignTimer.stop();
+  }
+}
+
+void CFM::relayingState(bool validSignal)
+{
+  if (validSignal) {
+    if (m_timeoutTimer.isRunning() && m_timeoutTimer.hasExpired()) {
+      DEBUG1("State to TIMEOUT");
+      m_state = FS_TIMEOUT;
+      m_ackMinTimer.stop();
+      m_timeoutTimer.stop();
+      m_timeoutTone.start();
+    }
+  } else {
+    DEBUG1("State to RELAYING_WAIT");
+    m_state = FS_RELAYING_WAIT;
+    m_ackDelayTimer.start();
+  }
+
+  if (m_callsignTimer.isRunning() && m_callsignTimer.hasExpired()) {
+    sendCallsign();
+    m_callsignTimer.start();
+  }
+}
+
+void CFM::relayingWaitState(bool validSignal)
+{
+  if (validSignal) {
+    DEBUG1("State to RELAYING");
+    m_state = FS_RELAYING;
+    m_ackDelayTimer.stop();
+  } else {
+    if (m_ackDelayTimer.isRunning() && m_ackDelayTimer.hasExpired()) {
+      DEBUG1("State to HANG");
+      m_state = FS_HANG;
+
+      if (m_ackMinTimer.isRunning()) {
+        if (m_ackMinTimer.hasExpired()) {
+          DEBUG1("Send ack");
+          m_rfAck.start();
+          m_ackMinTimer.stop();
+        }
+      } else {
+          DEBUG1("Send ack");
+          m_rfAck.start();
+          m_ackMinTimer.stop();
+      }
+
+      m_ackDelayTimer.stop();
+      m_timeoutTimer.stop();
+      m_hangTimer.start();
+    }
+  }
+
+  if (m_callsignTimer.isRunning() && m_callsignTimer.hasExpired()) {
+    sendCallsign();
+    m_callsignTimer.start();
+  }
+}
+
+void CFM::hangState(bool validSignal)
+{
+  if (validSignal) {
+    DEBUG1("State to RELAYING");
+    m_state = FS_RELAYING;
+    DEBUG1("Stop ack");
+    m_rfAck.stop();
+    beginRelaying();
+  } else {
+    if (m_hangTimer.isRunning() && m_hangTimer.hasExpired()) {
+      DEBUG1("State to LISTENING");
+      m_state = FS_LISTENING;
+      m_hangTimer.stop();
+
+      if (m_callsignAtEnd)
+        sendCallsign();
+
+      m_callsignTimer.stop();
+    }
+  }
+
+  if (m_callsignTimer.isRunning() && m_callsignTimer.hasExpired()) {
+    sendCallsign();
+    m_callsignTimer.start();
+  }
+}
+
+void CFM::timeoutState(bool validSignal)
+{
+  if (!validSignal) {
+    DEBUG1("State to TIMEOUT_WAIT");
+    m_state = FS_TIMEOUT_WAIT;
+    m_ackDelayTimer.start();
+  }
+
+  if (m_callsignTimer.isRunning() && m_callsignTimer.hasExpired()) {
+    sendCallsign();
+    m_callsignTimer.start();
+  }
+}
+
+void CFM::timeoutWaitState(bool validSignal)
+{
+  if (validSignal) {
+    DEBUG1("State to TIMEOUT");
+    m_state = FS_TIMEOUT;
+    m_ackDelayTimer.stop();
+  } else {
+    if (m_ackDelayTimer.isRunning() && m_ackDelayTimer.hasExpired()) {
+      DEBUG1("State to HANG");
+      m_state = FS_HANG;
+      m_timeoutTone.stop();
+      DEBUG1("Send ack");
+      m_rfAck.start();
+      m_ackDelayTimer.stop();
+      m_ackMinTimer.stop();
+      m_timeoutTimer.stop();
+      m_hangTimer.start();
+    }
+  }
+
+  if (m_callsignTimer.isRunning() && m_callsignTimer.hasExpired()) {
+    sendCallsign();
+    m_callsignTimer.start();
+  }
+}
+
+void CFM::sendCallsign()
+{
+  if (m_holdoffTimer.isRunning()) {
+    if (m_holdoffTimer.hasExpired()) {
+      DEBUG1("Send callsign");
+      m_callsign.start();
+      m_holdoffTimer.start();
+    }
+  } else {
+    DEBUG1("Send callsign");
+    m_callsign.start();
+  }
+}
+
+void CFM::beginRelaying()
+{
+  m_timeoutTimer.start();
+  m_ackMinTimer.start();
+}

FM.h

@@ -0,0 +1,95 @@
+/*
+ *   Copyright (C) 2020 by Jonathan Naylor G4KLX
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if !defined(FM_H)
+#define  FM_H
+
+#include "Config.h"
+
+#include "FMBlanking.h"
+#include "FMCTCSSRX.h"
+#include "FMCTCSSTX.h"
+#include "FMTimeout.h"
+#include "FMKeyer.h"
+#include "FMTimer.h"
+#include "FMDirectForm1.h"
+
+enum FM_STATE {
+  FS_LISTENING,
+  FS_KERCHUNK,
+  FS_RELAYING,
+  FS_RELAYING_WAIT,
+  FS_TIMEOUT,
+  FS_TIMEOUT_WAIT,
+  FS_HANG
+};
+
+
+
+
+class CFM {
+public:
+  CFM();
+
+  void samples(bool cos, q15_t* samples, uint8_t length);
+
+  void process();
+
+  void reset();
+
+  uint8_t setCallsign(const char* callsign, uint8_t speed, uint16_t frequency, uint8_t time, uint8_t holdoff, uint8_t highLevel, uint8_t lowLevel, bool callsignAtStart, bool callsignAtEnd);
+  uint8_t setAck(const char* rfAck, uint8_t speed, uint16_t frequency, uint8_t minTime, uint16_t delay, uint8_t level);
+  uint8_t setMisc(uint16_t timeout, uint8_t timeoutLevel, uint8_t ctcssFrequency, uint8_t ctcssThreshold, uint8_t ctcssLevel, uint8_t kerchunkTime, uint8_t hangTime, bool useCOS, uint8_t rxBoost, uint8_t maxDev);
+
+private:
+  CFMKeyer             m_callsign;
+  CFMKeyer             m_rfAck;
+  CFMCTCSSRX           m_ctcssRX;
+  CFMCTCSSTX           m_ctcssTX;
+  CFMTimeout           m_timeoutTone;
+  FM_STATE             m_state;
+  bool                 m_callsignAtStart;
+  bool                 m_callsignAtEnd;
+  CFMTimer             m_callsignTimer;
+  CFMTimer             m_timeoutTimer;
+  CFMTimer             m_holdoffTimer;
+  CFMTimer             m_kerchunkTimer;
+  CFMTimer             m_ackMinTimer;
+  CFMTimer             m_ackDelayTimer;
+  CFMTimer             m_hangTimer;
+  CFMDirectFormI       m_filterStage1;
+  CFMDirectFormI       m_filterStage2;
+  CFMDirectFormI       m_filterStage3;
+  CFMBlanking          m_blanking;
+  bool                 m_useCOS;
+  q15_t                m_rxBoost;
+
+  void stateMachine(bool validSignal, uint8_t length);
+  void listeningState(bool validSignal);
+  void kerchunkState(bool validSignal);
+  void relayingState(bool validSignal);
+  void relayingWaitState(bool validSignal);
+  void timeoutState(bool validSignal);
+  void timeoutWaitState(bool validSignal);
+  void hangState(bool validSignal);
+
+  void sendCallsign();
+  void beginRelaying();
+};
+
+#endif

FMBlanking.cpp

@@ -0,0 +1,82 @@
+/*
+ *   Copyright (C) 2020 by Jonathan Naylor G4KLX
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "Config.h"
+#include "Globals.h"
+#include "FMBlanking.h"
+
+// 2000 Hz sine wave at 24000 Hz sample rate
+const q31_t TONE[] = {0, 16384, 28378, 32767, 28378, 16384, 0, -16383, -28377, -32767, -28377, -16383};
+
+const uint8_t TONE_LEN = 12U;
+
+const uint32_t BLEEP_LEN = 2400U;   // 100ms
+
+CFMBlanking::CFMBlanking() :
+m_posValue(0),
+m_negValue(0),
+m_level(128 * 128),
+m_running(false),
+m_pos(0U),
+m_n(0U)
+{
+}
+
+void CFMBlanking::setParams(uint8_t value, uint8_t level)
+{
+  m_posValue = q15_t(value * 128);
+  m_negValue = -m_posValue;
+
+  m_level = q15_t(level * 128);
+}
+
+q15_t CFMBlanking::process(q15_t sample)
+{
+  if (m_posValue == 0)
+    return sample;
+
+  if (!m_running) {
+    if (sample >= m_posValue) {
+      m_running = true;
+      m_pos = 0U;
+      m_n   = 0U;
+    } else if (sample <= m_negValue) {
+      m_running = true;
+      m_pos = 0U;
+      m_n   = 0U;
+    }
+  }
+
+  if (!m_running)
+    return sample;
+
+  if (m_pos <= BLEEP_LEN) {
+    q31_t value = TONE[m_n++] * m_level;
+    sample = q15_t(__SSAT((value >> 15), 16));
+    if (m_n >= TONE_LEN)
+      m_n = 0U;
+  } else {
+    sample = 0;
+  }
+
+  m_pos++;
+  if (m_pos >= 12000U)
+    m_running = false;
+
+  return sample;
+}

FMBlanking.h

@@ -0,0 +1,41 @@
+/*
+ *   Copyright (C) 2020 by Jonathan Naylor G4KLX
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if !defined(FMBlanking_H)
+#define  FMBlanking_H
+
+#include "Config.h"
+
+class CFMBlanking {
+public:
+  CFMBlanking();
+
+  void setParams(uint8_t value, uint8_t level);
+
+  q15_t process(q15_t sample);
+
+private:
+  q15_t    m_posValue;
+  q15_t    m_negValue;
+  q15_t    m_level;
+  bool     m_running;
+  uint32_t m_pos;
+  uint8_t  m_n;
+};
+
+#endif

FMCTCSSRX.cpp

@@ -0,0 +1,172 @@
+/*
+ *   Copyright (C) 2020 by Jonathan Naylor G4KLX
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "Config.h"
+#include "Globals.h"
+#include "FMCTCSSRX.h"
+
+const struct RX_CTCSS_TABLE {
+  uint8_t frequency;
+  q63_t   coeffDivTwo;
+} RX_CTCSS_TABLE_DATA[] = {
+  { 67U, 2147153298},
+  { 69U, 2147130228},
+  { 71U, 2147103212},
+  { 74U, 2147076297},
+  { 77U, 2147047330},
+  { 79U, 2147016195},
+  { 82U, 2146982775},
+  { 85U, 2146946945},
+  { 88U, 2146907275},
+  { 91U, 2146867538},
+  { 94U, 2146822298},
+  { 97U, 2146785526},
+  {100U, 2146747759},
+  {103U, 2146695349},
+  {107U, 2146637984},
+  {110U, 2146578604},
+  {114U, 2146513835},
+  {118U, 2146445080},
+  {123U, 2146370355},
+  {127U, 2146291161},
+  {131U, 2146205372},
+  {136U, 2146112589},
+  {141U, 2146014479},
+  {146U, 2145910829},
+  {151U, 2145796971},
+  {156U, 2145676831},
+  {159U, 2145604646},
+  {162U, 2145547790},
+  {165U, 2145468230},
+  {167U, 2145409363},
+  {171U, 2145324517},
+  {173U, 2145261046},
+  {177U, 2145170643},
+  {179U, 2145102321},
+  {183U, 2145006080},
+  {186U, 2144932648},
+  {189U, 2144830280},
+  {192U, 2144748638},
+  {196U, 2144639788},
+  {199U, 2144555290},
+  {203U, 2144436713},
+  {206U, 2144346237},
+  {210U, 2144217348},
+  {218U, 2143983951},
+  {225U, 2143735870},
+  {229U, 2143622139},
+  {233U, 2143469001},
+  {241U, 2143182299},
+  {250U, 2142874683},
+  {254U, 2142733729}};
+
+const uint8_t CTCSS_TABLE_DATA_LEN = 50U;
+
+// 4Hz bandwidth
+const uint16_t N = 24000U / 4U;
+
+CFMCTCSSRX::CFMCTCSSRX() :
+m_coeffDivTwo(0),
+m_threshold(0),
+m_count(0U),
+m_q0(0),
+m_q1(0),
+m_result(CTS_NONE)
+{
+}
+
+uint8_t CFMCTCSSRX::setParams(uint8_t frequency, uint8_t threshold)
+{
+  m_coeffDivTwo = 0;
+
+  for (uint8_t i = 0U; i < CTCSS_TABLE_DATA_LEN; i++) {
+    if (RX_CTCSS_TABLE_DATA[i].frequency == frequency) {
+      m_coeffDivTwo = RX_CTCSS_TABLE_DATA[i].coeffDivTwo;
+      break;
+    }
+  }
+
+  if (m_coeffDivTwo == 0)
+    return 4U;
+
+  m_threshold = q31_t(threshold);
+
+  return 0U;
+}
+
+CTCSSState CFMCTCSSRX::process(q15_t sample)
+{
+  m_result = m_result & (~CTS_READY);
+
+  q31_t q2 = m_q1;
+  m_q1 = m_q0;
+
+  // Q31 multiplication, t3 = m_coeffDivTwo * 2 * m_q1
+  q63_t t1 = m_coeffDivTwo * m_q1;
+  q31_t t2 = __SSAT((t1 >> 31), 31);
+  q31_t t3 = t2 * 2;
+
+  // m_q0 = m_coeffDivTwo * m_q1 * 2 - q2 + sample
+  m_q0 = t3 - q2 + q31_t(sample);
+
+  m_count++;
+  if (m_count == N) {
+    // Q31 multiplication, t2 = m_q0 * m_q0
+    q63_t t1 = q63_t(m_q0) * q63_t(m_q0);
+    q31_t t2 = __SSAT((t1 >> 31), 31);
+
+    // Q31 multiplication, t4 = m_q0 * m_q0
+    q63_t t3 = q63_t(m_q1) * q63_t(m_q1);
+    q31_t t4 = __SSAT((t3 >> 31), 31);
+
+    // Q31 multiplication, t9 = m_q0 * m_q1 * m_coeffDivTwo * 2
+    q63_t t5 = q63_t(m_q0) * q63_t(m_q1);
+    q31_t t6 = __SSAT((t5 >> 31), 31);
+    q63_t t7 = t6 * m_coeffDivTwo;
+    q31_t t8 = __SSAT((t7 >> 31), 31);
+    q31_t t9  = t8 * 2;
+
+    // value = m_q0 * m_q0 + m_q1 * m_q1 - m_q0 * m_q1 * m_coeffDivTwo * 2
+    q31_t value = t2 + t4 - t9;
+
+    m_result = m_result | CTS_READY;
+    if (value >= m_threshold)
+      m_result = m_result | CTS_VALID;
+    else
+      m_result = m_result & ~CTS_VALID;
+
+    m_count = 0U;
+    m_q0 = 0;
+    m_q1 = 0;
+  }
+
+  return m_result;
+}
+
+CTCSSState CFMCTCSSRX::getState()
+{
+  return m_result;
+}
+
+void CFMCTCSSRX::reset()
+{
+  m_q0 = 0;
+  m_q1 = 0;
+  m_result = CTS_NONE;
+  m_count  = 0U;
+}

FMCTCSSRX.h

@@ -0,0 +1,73 @@
+/*
+ *   Copyright (C) 2020 by Jonathan Naylor G4KLX
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if !defined(FMCTCSSRX_H)
+#define  FMCTCSSRX_H
+
+#include "Config.h"
+
+enum CTCSSState
+{
+  CTS_NONE  = 0,
+  CTS_READY = 1,
+  CTS_VALID = 2,
+  CTS_READY_VALID = CTS_READY | CTS_VALID
+};
+
+inline CTCSSState operator|(CTCSSState a, CTCSSState b)
+{
+  return static_cast<CTCSSState>(static_cast<uint8_t>(a) | static_cast<uint8_t>(b));
+}
+
+inline CTCSSState operator&(CTCSSState a, CTCSSState b)
+{
+  return static_cast<CTCSSState>(static_cast<uint8_t>(a) & static_cast<uint8_t>(b));
+}
+
+inline CTCSSState operator~(CTCSSState a)
+{
+  return static_cast<CTCSSState>(~(static_cast<uint8_t>(a)));
+}
+
+#define CTCSS_READY(a) ((a & CTS_READY) != 0)
+#define CTCSS_NOT_READY(a) ((a & CTS_READY) == 0)
+#define CTCSS_VALID(a) ((a & CTS_VALID) != 0)
+#define CTCSS_NOT_VALID(a) ((a & CTS_VALID) == 0)
+
+class CFMCTCSSRX {
+public:
+  CFMCTCSSRX();
+
+  uint8_t setParams(uint8_t frequency, uint8_t threshold);
+  
+  CTCSSState process(q15_t samples);
+
+  CTCSSState getState();
+
+  void reset();
+
+private:
+ q63_t      m_coeffDivTwo;
+ q31_t      m_threshold;
+ uint16_t   m_count;
+ q31_t      m_q0;
+ q31_t      m_q1;
+ CTCSSState m_result;
+};
+
+#endif

FMCTCSSTX.cpp

@@ -0,0 +1,126 @@
+/*
+ *   Copyright (C) 2020 by Jonathan Naylor G4KLX
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "Config.h"
+#include "Globals.h"
+#include "FMCTCSSTX.h"
+
+const struct TX_CTCSS_TABLE {
+  uint8_t  frequency;
+  uint16_t length;
+  q15_t    increment;
+} TX_CTCSS_TABLE_DATA[] = {
+  { 67U, 358U,  92},
+  { 69U, 346U,  95},
+  { 71U, 334U,  99},
+  { 74U, 323U, 102},
+  { 77U, 312U, 106},
+  { 79U, 301U, 109},
+  { 82U, 291U, 113},
+  { 85U, 281U, 117},
+  { 88U, 271U, 121},
+  { 91U, 262U, 125},
+  { 94U, 253U, 130},
+  { 97U, 246U, 133},
+  {100U, 240U, 137},
+  {103U, 232U, 142},
+  {107U, 224U, 147},
+  {110U, 216U, 152},
+  {114U, 209U, 157},
+  {118U, 202U, 163},
+  {123U, 195U, 168},
+  {127U, 189U, 174},
+  {131U, 182U, 180},
+  {136U, 176U, 187},
+  {141U, 170U, 193},
+  {146U, 164U, 200},
+  {151U, 159U, 207},
+  {156U, 153U, 214},
+  {159U, 150U, 219},
+  {162U, 148U, 222},
+  {165U, 145U, 226},
+  {167U, 143U, 230},
+  {171U, 140U, 234},
+  {173U, 138U, 238},
+  {177U, 135U, 243},
+  {179U, 133U, 246},
+  {183U, 131U, 251},
+  {186U, 129U, 255},
+  {189U, 126U, 260},
+  {192U, 124U, 264},
+  {196U, 122U, 269},
+  {199U, 120U, 273},
+  {203U, 118U, 278},
+  {206U, 116U, 282},
+  {210U, 114U, 288},
+  {218U, 110U, 298},
+  {225U, 106U, 309},
+  {229U, 105U, 313},
+  {233U, 103U, 319},
+  {241U,  99U, 331},
+  {250U,  96U, 342},
+  {254U,  94U, 347}
+};
+
+const uint8_t CTCSS_TABLE_DATA_LEN = 50U;
+
+CFMCTCSSTX::CFMCTCSSTX() :
+m_values(NULL),
+m_length(0U),
+m_n(0U)
+{
+}
+
+uint8_t CFMCTCSSTX::setParams(uint8_t frequency, uint8_t level)
+{
+  const TX_CTCSS_TABLE* entry = NULL;
+
+  for (uint8_t i = 0U; i < CTCSS_TABLE_DATA_LEN; i++) {
+    if (TX_CTCSS_TABLE_DATA[i].frequency == frequency) {
+      entry = TX_CTCSS_TABLE_DATA + i;
+      break;
+    }
+  }
+
+  if (entry == NULL)
+    return 4U;
+
+  m_length = entry->length;
+
+  delete[] m_values;
+  m_values = new q15_t[m_length];
+
+  q15_t arg = 0;
+  for (uint16_t i = 0U; i < m_length; i++) {
+    q31_t value = ::arm_sin_q15(arg) * q15_t(level * 13);
+    m_values[i] = q15_t(__SSAT((value >> 15), 16));
+
+    arg += entry->increment;
+  }
+
+  return 0U;
+}
+
+q15_t CFMCTCSSTX::getAudio()
+{
+  q15_t sample = m_values[m_n++];
+  if(m_n >= m_length)
+    m_n = 0U;
+  
+  return sample;
+}

FMCTCSSTX.h

@@ -0,0 +1,38 @@
+/*
+ *   Copyright (C) 2020 by Jonathan Naylor G4KLX
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if !defined(FMCTCSSTX_H)
+#define  FMCTCSSTX_H
+
+#include "Config.h"
+
+class CFMCTCSSTX {
+public:
+  CFMCTCSSTX();
+
+  uint8_t setParams(uint8_t frequency, uint8_t level);
+
+  q15_t getAudio();
+
+private:
+  q15_t*   m_values;
+  uint16_t m_length;
+  uint16_t m_n;
+};
+
+#endif

FMDirectForm1.h

@@ -0,0 +1,111 @@
+
+/*******************************************************************************
+This header file has been taken from:
+"A Collection of Useful C++ Classes for Digital Signal Processing"
+By Vinnie Falco 
+Bernd Porr adapted it for Linux and turned it into a filter using
+fixed point arithmetic.
+--------------------------------------------------------------------------------
+License: MIT License (http://www.opensource.org/licenses/mit-license.php)
+Copyright (c) 2009 by Vinnie Falco
+Copyright (C) 2013-2017, Bernd Porr, [email protected]
+Copyright (C) 2020 , Mario Molitor , [email protected]
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+*******************************************************************************/
+
+// based on https://raw.githubusercontent.com/berndporr/iir_fixed_point/master/DirectFormI.h
+
+#include "Globals.h"
+
+#ifndef DIRECTFORMI_H_
+#define DIRECTFORMI_H_
+class CFMDirectFormI
+{
+public:
+
+	// convenience function which takes the a0 argument but ignores it!
+	CFMDirectFormI(const q31_t b0, const q31_t b1, const q31_t b2,
+			const q31_t, const q31_t a1, const q31_t a2)
+	{
+		// FIR coefficients
+		c_b0 = b0;
+		c_b1 = b1;
+		c_b2 = b2;
+		// IIR coefficients
+		c_a1 = a1;
+		c_a2 = a2;
+		reset();
+	}
+
+	CFMDirectFormI(const CFMDirectFormI &my)
+	{
+	// delay line
+		m_x2 = my.m_x2; // x[n-2]
+		m_y2 = my.m_y2; // y[n-2]
+		m_x1 = my.m_x1; // x[n-1]
+		m_y1 = my.m_y1; // y[n-1]
+
+	// coefficients
+		c_b0 = my.c_b0;
+		c_b1 = my.c_b1;
+		c_b2 = my.c_b2; // FIR
+		c_a1 = my.c_a1;
+		c_a2 = my.c_a2; // IIR
+    }
+
+	void reset ()
+	{
+		m_x1 = 0;
+		m_x2 = 0;
+		m_y1 = 0;
+		m_y2 = 0;
+	}
+
+	// filtering operation: one sample in and one out
+	inline q15_t filter(const q15_t in)
+	{
+		// calculate the output
+		register q31_t out_upscaled = c_b0 * in    //F4FXL puting stauration here made everything quiet, not sure why
+									+ c_b1 * m_x1
+									+ c_b2 * m_x2
+									- c_a1 * m_y1
+									- c_a2 * m_y2;
+
+		q15_t out = __SSAT(out_upscaled >> 15, 15);
+
+		// update the delay lines
+		m_x2 = m_x1;
+		m_y2 = m_y1;
+		m_x1 = in;
+		m_y1 = out;
+
+		return out;
+	}
+
+private:
+	// delay line
+	q31_t m_x2; // x[n-2]
+	q31_t m_y2; // y[n-2]
+	q31_t m_x1; // x[n-1]
+	q31_t m_y1; // y[n-1]
+
+	// coefficients
+	q31_t c_b0,c_b1,c_b2; // FIR
+	q31_t c_a1,c_a2; // IIR
+};
+
+#endif /* DIRECTFORMI_H */

FMGenerateFilterCoefficients.py

@@ -0,0 +1,45 @@
+# based on https://github.com/berndporr/iir_fixed_point/blob/master/gen_coeff.py
+
+import numpy as np
+import scipy.signal as signal
+import pylab as pl
+
+# Calculate the coefficients for a pure fixed point
+# integer filter
+
+# sampling rate
+fs = 24000
+
+# cutoffs
+f1 = 300
+f2 = 2700
+# ripple
+rp = 0.2
+
+# scaling factor in bits, do not change !
+q = 15
+# scaling factor as facor...
+scaling_factor = 2**q
+
+# let's generate a sequence of 2nd order IIR filters
+#sos = signal.butter(2,[f1/fs*2,f2/fs*2],'pass',output='sos')
+sos = signal.cheby1(3,rp,[f1/fs*2,f2/fs*2],'bandpass', output='sos')
+
+sos = np.round((sos) * scaling_factor)
+
+# print coefficients
+for biquad in sos:
+    for coeff in biquad:
+        print(int(coeff),",",sep="",end="")
+        #print((coeff),",",sep="",end="")
+    print("")
+
+# plot the frequency response
+b,a = signal.sos2tf(sos)
+w,h = signal.freqz(b,a)
+pl.plot(w/np.pi/2*fs,20*np.log(np.abs(h)))
+pl.xlabel('frequency/Hz');
+pl.ylabel('gain/dB');
+pl.ylim(top=1,bottom=-20);
+pl.xlim(left=250, right=12000);
+pl.show()

FMKeyer.cpp

@@ -0,0 +1,210 @@
+/*
+ *   Copyright (C) 2020 by Jonathan Naylor G4KLX
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "Config.h"
+#include "Globals.h"
+#include "FMKeyer.h"
+
+const struct {
+  char     c;
+  uint32_t pattern;
+  uint8_t  length;
+} SYMBOL_LIST[] = {
+  {'A', 0xB8000000U, 8U},
+  {'B', 0xEA800000U, 12U},
+  {'C', 0xEBA00000U, 14U},
+  {'D', 0xEA000000U, 10U},
+  {'E', 0x80000000U, 4U},
+  {'F', 0xAE800000U, 12U},
+  {'G', 0xEE800000U, 12U},
+  {'H', 0xAA000000U, 10U},
+  {'I', 0xA0000000U, 6U},
+  {'J', 0xBBB80000U, 16U},
+  {'K', 0xEB800000U, 12U},
+  {'L', 0xBA800000U, 12U},
+  {'M', 0xEE000000U, 10U},
+  {'N', 0xE8000000U, 8U},
+  {'O', 0xEEE00000U, 14U},
+  {'P', 0xBBA00000U, 14U},
+  {'Q', 0xEEB80000U, 16U},
+  {'R', 0xBA000000U, 10U},
+  {'S', 0xA8000000U, 8U},
+  {'T', 0xE0000000U, 6U},
+  {'U', 0xAE000000U, 10U},
+  {'V', 0xAB800000U, 12U},
+  {'W', 0xBB800000U, 12U},
+  {'X', 0xEAE00000U, 14U},
+  {'Y', 0xEBB80000U, 16U},
+  {'Z', 0xEEA00000U, 14U},
+  {'1', 0xBBBB8000U, 20U},
+  {'2', 0xAEEE0000U, 18U},
+  {'3', 0xABB80000U, 16U},
+  {'4', 0xAAE00000U, 14U},
+  {'5', 0xAA800000U, 12U},
+  {'6', 0xEAA00000U, 14U},
+  {'7', 0xEEA80000U, 16U},
+  {'8', 0xEEEA0000U, 18U},
+  {'9', 0xEEEE8000U, 20U},
+  {'0', 0xEEEEE000U, 22U},
+  {'/', 0xEAE80000U, 16U},
+  {'?', 0xAEEA0000U, 18U},
+  {',', 0xEEAEE000U, 22U},
+  {'-', 0xEAAE0000U, 18U},
+  {'=', 0xEAB80000U, 16U},
+  {' ', 0x00000000U, 4U},
+  {0U,  0x00000000U, 0U}
+};
+
+const uint8_t BIT_MASK_TABLE[] = {0x80U, 0x40U, 0x20U, 0x10U, 0x08U, 0x04U, 0x02U, 0x01U};
+
+#define WRITE_BIT_FM(p,i,b) p[(i)>>3] = (b) ? (p[(i)>>3] | BIT_MASK_TABLE[(i)&7]) : (p[(i)>>3] & ~BIT_MASK_TABLE[(i)&7])
+#define READ_BIT_FM(p,i)    (p[(i)>>3] & BIT_MASK_TABLE[(i)&7])
+
+CFMKeyer::CFMKeyer() :
+m_wanted(false),
+m_poBuffer(),
+m_poLen(0U),
+m_poPos(0U),
+m_dotLen(0U),
+m_dotPos(0U),
+m_audio(NULL),
+m_audioLen(0U),
+m_audioPos(0U),
+m_highLevel(0U),
+m_lowLevel(0)
+{
+}
+
+uint8_t CFMKeyer::setParams(const char* text, uint8_t speed, uint16_t frequency, uint8_t highLevel, uint8_t lowLevel)
+{
+  m_poLen = 0U;
+
+  for (uint8_t i = 0U; text[i] != '\0'; i++) {
+    for (uint8_t j = 0U; SYMBOL_LIST[j].c != 0U; j++) {
+      if (SYMBOL_LIST[j].c == text[i]) {
+        uint32_t MASK = 0x80000000U;
+        for (uint8_t k = 0U; k < SYMBOL_LIST[j].length; k++, m_poLen++, MASK >>= 1) {
+          bool b = (SYMBOL_LIST[j].pattern & MASK) == MASK;
+          WRITE_BIT_FM(m_poBuffer, m_poLen, b);
+
+          if (m_poLen >= 995U) {
+            m_poLen = 0U;
+            return 4U;
+          }
+        }
+
+        break;
+      }
+    }
+  }
+
+  m_highLevel = q15_t(highLevel);
+  m_lowLevel  = q15_t(lowLevel);
+
+  m_dotLen = 24000U / speed;   // In samples
+
+  m_audioLen = 24000U / frequency; // In samples
+
+  delete[] m_audio;
+  m_audio = new bool[m_audioLen];
+
+  for (uint16_t i = 0U; i < m_audioLen; i++) {
+    if (i < (m_audioLen / 2U))
+      m_audio[i] = true;
+    else
+      m_audio[i] = false;
+  }
+
+  return 0U;
+}
+
+q15_t CFMKeyer::getHighAudio()
+{
+  q15_t output = 0U;
+  if (!m_wanted)
+    return 0U;
+
+  bool b = READ_BIT_FM(m_poBuffer, m_poPos);
+  if (b)
+    output = m_audio[m_audioPos] ? m_highLevel : -m_highLevel;
+
+  m_audioPos++;
+  if (m_audioPos >= m_audioLen)
+    m_audioPos = 0U;
+  m_dotPos++;
+  if (m_dotPos >= m_dotLen) {
+    m_dotPos = 0U;
+    m_poPos++;
+    if (m_poPos >= m_poLen) {
+      stop();
+      return output;
+    }
+  }
+
+  return output;
+}
+
+q15_t CFMKeyer::getLowAudio()
+{
+  q15_t output = 0U;
+  if (!m_wanted)
+    return 0U;
+
+  bool b = READ_BIT_FM(m_poBuffer, m_poPos);
+  if (b)
+    output = m_audio[m_audioPos] ? m_lowLevel : -m_lowLevel;
+
+  m_audioPos++;
+  if (m_audioPos >= m_audioLen)
+    m_audioPos = 0U;
+  m_dotPos++;
+  if (m_dotPos >= m_dotLen) {
+    m_dotPos = 0U;
+    m_poPos++;
+    if (m_poPos >= m_poLen) {
+      stop();
+      return output;
+    }
+  }
+
+  return output;
+}
+
+void CFMKeyer::start()
+{
+  if (isRunning())
+    return;
+
+  m_wanted   = true;
+  m_poPos    = 0U;
+  m_dotPos   = 0U;
+  m_audioPos = 0U;
+}
+
+void CFMKeyer::stop()
+{
+  m_wanted   = false;
+  m_poPos    = 0U;
+  m_dotPos   = 0U;
+  m_audioPos = 0U;
+}
+
+bool CFMKeyer::isRunning() const
+{
+  return m_poPos > 0U || m_dotPos > 0U || m_audioPos > 0U;
+}

FMKeyer.h

@@ -0,0 +1,52 @@
+/*
+ *   Copyright (C) 2020 by Jonathan Naylor G4KLX
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if !defined(FMKeyer_H)
+#define  FMKeyer_H
+
+#include "Config.h"
+
+class CFMKeyer {
+public:
+  CFMKeyer();
+
+  uint8_t setParams(const char* text, uint8_t speed, uint16_t frequency, uint8_t highLevel, uint8_t lowLevel);
+
+  q15_t getHighAudio();
+  q15_t getLowAudio();
+
+  void start();
+  void stop();
+
+  bool isRunning() const;
+
+private:
+  bool     m_wanted;
+  uint8_t  m_poBuffer[1000U];
+  uint16_t m_poLen;
+  uint16_t m_poPos;
+  uint16_t m_dotLen;
+  uint16_t m_dotPos;
+  bool*    m_audio;
+  uint16_t m_audioLen;
+  uint16_t m_audioPos;
+  q15_t    m_highLevel;
+  q15_t    m_lowLevel;
+};
+
+#endif

FMTimeout.cpp

@@ -0,0 +1,76 @@
+/*
+ *   Copyright (C) 2020 by Jonathan Naylor G4KLX
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "Config.h"
+#include "Globals.h"
+#include "FMTimeout.h"
+
+// 400 Hz sine wave at 24000 Hz sample rate
+const q15_t BUSY_AUDIO[] = {0, 3426, 6813, 10126, 13328, 16384, 19261, 21926, 24351, 26510, 28378, 29935, 31164, 32052, 32588, 32767, 32588, 32052, 31164, 29935, 28378, 26510, 24351,
+                            21926, 19261, 16384, 13328, 10126, 6813, 3425, 0, -3425, -6813, -10126, -13328, -16384, -19261, -21926, -24351, -26510, -28378, -29935, -31164, -32052,
+                            -32588, -32768, -32588, -32052, -31164, -29935, -28378, -26510, -24351, -21926, -19261, -16384, -13328, -10126, -6813, -3425};
+const uint8_t BUSY_AUDIO_LEN = 60U;
+
+CFMTimeout::CFMTimeout() :
+m_level(128 * 128),
+m_running(false),
+m_pos(0U),
+m_n(0U)
+{
+}
+
+void CFMTimeout::setParams(uint8_t level)
+{
+  m_level = q15_t(level * 128);
+}
+
+q15_t CFMTimeout::getAudio()
+{
+  q15_t sample = 0U;
+  if (!m_running)
+    return sample;
+
+  if (m_pos > 12000U) {
+    q31_t sample = BUSY_AUDIO[m_n] * m_level;
+    sample = q15_t(__SSAT((sample >> 15), 16));
+
+    m_n++;
+    if (m_n >= BUSY_AUDIO_LEN)
+      m_n = 0U;
+  } else {
+    sample = 0U;
+  }
+
+  m_pos++;
+  if (m_pos >= 24000U)
+    m_pos = 0U;
+
+  return sample;
+}
+
+void CFMTimeout::start()
+{
+  m_running = true;
+  m_pos = 0U;
+  m_n   = 0U;
+}
+
+void CFMTimeout::stop()
+{
+  m_running = false;
+}

FMTimeout.h

@@ -0,0 +1,42 @@
+/*
+ *   Copyright (C) 2020 by Jonathan Naylor G4KLX
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if !defined(FMTimeout_H)
+#define  FMTimeout_H
+
+#include "Config.h"
+
+class CFMTimeout {
+public:
+  CFMTimeout();
+
+  void setParams(uint8_t level);
+
+  void start();
+  void stop();
+
+  q15_t getAudio();
+
+private:
+  q15_t    m_level;
+  bool     m_running;
+  uint32_t m_pos;
+  uint8_t  m_n;
+};
+
+#endif

FMTimer.cpp

@@ -0,0 +1,70 @@
+/*
+ *   Copyright (C) 2009,2010,2015,2020 by Jonathan Naylor G4KLX
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "Config.h"
+#include "Globals.h"
+#include "FMTimer.h"
+
+CFMTimer::CFMTimer() :
+m_timeout(0U),
+m_timer(0U)
+{
+}
+
+void CFMTimer::setTimeout(uint16_t secs, uint32_t msecs)
+{
+  m_timeout = (secs * 24000U) + (msecs * 24U);
+}
+
+uint32_t CFMTimer::getTimeout() const
+{
+  return m_timeout / 24U;
+}
+
+void CFMTimer::start()
+{
+  if (m_timeout > 0U)
+    m_timer = 1U;
+}
+
+void CFMTimer::stop()
+{
+  m_timer = 0U;
+}
+
+void CFMTimer::clock(uint8_t length)
+{
+  if (m_timer > 0U && m_timeout > 0U)
+    m_timer += length;
+}
+
+bool CFMTimer::isRunning() const
+{
+  return m_timer > 0U;
+}
+
+bool CFMTimer::hasExpired() const
+{
+  if (m_timeout == 0U || m_timer == 0U)
+    return false;
+
+  if (m_timer > m_timeout)
+    return true;
+
+  return false;
+}

FMTimer.h

@@ -0,0 +1,47 @@
+/*
+ *   Copyright (C) 2009,2010,2015,2020 by Jonathan Naylor G4KLX
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if !defined(FMTimer_H)
+#define  FMTimer_H
+
+#include "Config.h"
+
+class CFMTimer {
+public:
+  CFMTimer();
+
+  void setTimeout(uint16_t secs, uint32_t msecs);
+
+  uint32_t getTimeout() const;
+
+  void start();
+  
+  void stop();
+
+  void clock(uint8_t length);
+
+  bool isRunning() const;
+  
+  bool hasExpired() const;
+
+private:
+  uint32_t m_timeout;
+  uint32_t m_timer;
+};
+
+#endif

Globals.h

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2015,2016,2017,2018 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2015,2016,2017,2018,2020 by Jonathan Naylor G4KLX
  *
  *   This program is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by
@@ -49,6 +49,8 @@ enum MMDVM_STATE {
   STATE_YSF       = 3,
   STATE_P25       = 4,
   STATE_NXDN      = 5,
+  STATE_POCSAG    = 6,
+  STATE_FM        = 10,
 
   // Dummy states start at 90
   STATE_NXDNCAL1K = 91,
@@ -59,7 +61,9 @@ enum MMDVM_STATE {
   STATE_RSSICAL   = 96,
   STATE_CWID      = 97,
   STATE_DMRCAL    = 98,
-  STATE_DSTARCAL  = 99
+  STATE_DSTARCAL  = 99,
+  STATE_INTCAL    = 100,
+  STATE_POCSAGCAL = 101
 };
 
 #include "SerialPort.h"
@@ -76,15 +80,18 @@ enum MMDVM_STATE {
 #include "P25TX.h"
 #include "NXDNRX.h"
 #include "NXDNTX.h"
+#include "POCSAGTX.h"
 #include "CalDStarRX.h"
 #include "CalDStarTX.h"
 #include "CalDMR.h"
 #include "CalP25.h"
 #include "CalNXDN.h"
+#include "CalPOCSAG.h"
 #include "CalRSSI.h"
 #include "CWIdTX.h"
 #include "Debug.h"
 #include "IO.h"
+#include "FM.h"
 
 const uint8_t  MARK_SLOT1 = 0x08U;
 const uint8_t  MARK_SLOT2 = 0x04U;
@@ -95,6 +102,12 @@ const uint16_t RX_BLOCK_SIZE = 2U;
 const uint16_t TX_RINGBUFFER_SIZE = 500U;
 const uint16_t RX_RINGBUFFER_SIZE = 600U;
 
+#if defined(STM32F105xC) || defined(__MK20DX256__)
+const uint16_t TX_BUFFER_LEN = 2000U;
+#else
+const uint16_t TX_BUFFER_LEN = 4000U;
+#endif
+
 extern MMDVM_STATE m_modemState;
 
 extern bool m_dstarEnable;
@@ -102,6 +115,8 @@ extern bool m_dmrEnable;
 extern bool m_ysfEnable;
 extern bool m_p25Enable;
 extern bool m_nxdnEnable;
+extern bool m_pocsagEnable;
+extern bool m_fmEnable;
 
 extern bool m_duplex;
 
@@ -130,14 +145,18 @@ extern CP25TX p25TX;
 extern CNXDNRX nxdnRX;
 extern CNXDNTX nxdnTX;
 
+extern CPOCSAGTX pocsagTX;
+
+extern CFM fm;
+
 extern CCalDStarRX calDStarRX;
 extern CCalDStarTX calDStarTX;
 extern CCalDMR     calDMR;
 extern CCalP25     calP25;
 extern CCalNXDN    calNXDN;
+extern CCalPOCSAG  calPOCSAG;
 extern CCalRSSI    calRSSI;
 
 extern CCWIdTX cwIdTX;
 
 #endif
-

I2CTeensy.cpp

@@ -0,0 +1,235 @@
+/*
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *   28-4-2017 Created for MMDVM Pi shield for Teensy by Chris Huitema
+ */
+
+#include "Config.h"
+#include "Globals.h"
+
+#if defined(VK6MST_TEENSY_PI3_SHIELD_I2C)
+
+#include <i2c_t3.h>   //available here https://github.com/nox771/i2c_t3 or maybe the normal wire will work #include <wire.h> justs need to test i guess
+
+#define I2C_ADDRESS   0x22
+#define I2C_SPEED     100000
+
+// Function prototypes
+void receiveEvent(size_t count);
+void requestEvent(void);
+
+#define TX_FIFO_SIZE 512U
+#define RX_FIFO_SIZE 512U
+
+volatile uint8_t  TXfifo[TX_FIFO_SIZE];
+volatile uint8_t  RXfifo[RX_FIFO_SIZE];
+volatile uint16_t TXfifohead, TXfifotail;
+volatile uint16_t RXfifohead, RXfifotail;
+
+// Init queues
+void TXfifoinit(void)
+{
+   TXfifohead = 0U;
+   TXfifotail = 0U;
+}
+
+void RXfifoinit()
+{
+   RXfifohead = 0U;
+   RXfifotail = 0U;
+}
+
+// How full is queue
+
+uint16_t TXfifolevel(void)
+{
+   uint32_t tail = TXfifotail;
+   uint32_t head = TXfifohead;
+
+   if (tail > head)
+      return TX_FIFO_SIZE + head - tail;
+   else
+      return head - tail;
+}
+
+uint16_t RXfifolevel(void)
+{
+   uint32_t tail = RXfifotail;
+   uint32_t head = RXfifohead;
+
+   if (tail > head)
+      return RX_FIFO_SIZE + head - tail;
+   else
+      return head - tail;
+}
+
+
+uint8_t TXfifoput(uint8_t next)
+{
+   if (TXfifolevel() < TX_FIFO_SIZE) {
+      TXfifo[TXfifohead] = next;
+
+      TXfifohead++;
+      if (TXfifohead >= TX_FIFO_SIZE)
+         TXfifohead = 0U;
+      return 1U;
+   } else {
+      return 0U; // signal an overflow occurred by returning a zero count
+   }
+}
+
+void I2Cbegin(void)
+{
+  // Setup for Slave mode, address 0x22, pins 18/19, external pullups, speed in hz
+  Wire.begin(I2C_SLAVE, I2C_ADDRESS, I2C_PINS_18_19, I2C_PULLUP_EXT, I2C_SPEED);
+
+    // register events
+    Wire.onReceive(receiveEvent);
+    Wire.onRequest(requestEvent);
+
+    // initialize the fifos
+    TXfifoinit();
+    RXfifoinit();
+}
+
+
+int I2Cavailable(void)
+{
+  if (RXfifolevel() > 0U)
+      return 1U;
+    else
+      return 0U;
+}
+
+
+uint8_t I2Cread(void)
+{
+  uint8_t data_c = RXfifo[RXfifotail];
+
+   RXfifotail++;
+   if (RXfifotail >= RX_FIFO_SIZE)
+      RXfifotail = 0U;
+
+   return data_c;
+}
+
+
+void I2Cwrite(const uint8_t* data, uint16_t length)
+{
+   for (uint16_t i = 0U; i < length; i++)
+      TXfifoput(data[i]);   //puts it in the fifo
+}
+
+//
+// handle Rx Event (incoming I2C data)
+//
+void receiveEvent(size_t count)
+{
+  for (uint16_t i = 0U; i < count; i++)
+  {
+    if (RXfifolevel() < RX_FIFO_SIZE) {
+      RXfifo[RXfifohead] = Wire.readByte();
+      if (RXfifo[RXfifohead] != -1){
+        RXfifohead++;
+        if (RXfifohead >= RX_FIFO_SIZE) RXfifohead = 0U;
+      }
+    } else {
+      Wire.readByte();                  // drop data if mem full.
+    }
+    
+  }
+}
+
+//
+// handle Tx Event (outgoing I2C data)
+//
+void requestEvent(void)
+{
+    if (TXfifolevel() > 0) {
+      if (Wire.write(TXfifo[TXfifotail])){  //write to i2c
+        TXfifotail++;
+        if (TXfifotail >= TX_FIFO_SIZE) TXfifotail = 0U;
+      }  
+    }
+}
+
+
+
+/************************************/
+
+void CSerialPort::beginInt(uint8_t n, int speed)
+{
+  switch (n) {
+    case 1U:
+      return I2Cbegin();
+    case 3U:
+      Serial3.begin(speed);
+      break;
+    default:
+      break;
+  }
+}
+
+int CSerialPort::availableInt(uint8_t n)
+{
+  switch (n) {
+    case 1U:
+      return I2Cavailable();
+    case 3U:
+      return Serial3.available();
+    default:
+      return false;
+  }
+}
+
+int CSerialPort::availableForWriteInt(uint8_t n)
+{
+  switch (n) {
+    case 3U:
+      return Serial3.availableForWrite();
+    default:
+      return false;
+  }
+}
+
+uint8_t CSerialPort::readInt(uint8_t n)
+{
+  switch (n) {
+    case 1U:
+      return I2Cread();
+    case 3U:
+      return Serial3.read();
+    default:
+      return 0U;
+  }
+}
+
+void CSerialPort::writeInt(uint8_t n, const uint8_t* data, uint16_t length, bool flush)
+{
+  switch (n) {
+    case 1U:
+      I2Cwrite(data, length);
+      break;
+    case 3U:
+      Serial3.write(data, length);
+      if (flush)
+        Serial3.flush();
+      break;
+    default:
+      break;
+  }
+}
+
+#endif

IO.cpp

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2015,2016,2017,2018 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2015,2016,2017,2018,2020 by Jonathan Naylor G4KLX
  *   Copyright (C) 2015 by Jim Mclaughlin KI6ZUM
  *   Copyright (C) 2016 by Colin Durbridge G4EML
  *
@@ -61,18 +61,16 @@ m_txBuffer(TX_RINGBUFFER_SIZE),
 m_rssiBuffer(RX_RINGBUFFER_SIZE),
 m_dcFilter(),
 m_dcState(),
-m_dmrFilter(),
+m_rrcFilter(),
 m_gaussianFilter(),
 m_boxcarFilter(),
 m_nxdnFilter(),
 m_nxdnISincFilter(),
-m_ysfFilter(),
+m_rrcState(),
-m_dmrState(),
 m_gaussianState(),
 m_boxcarState(),
 m_nxdnState(),
 m_nxdnISincState(),
-m_ysfState(),
 m_pttInvert(false),
 m_rxLevel(128 * 128),
 m_cwIdTXLevel(128 * 128),
@@ -81,6 +79,8 @@ m_dmrTXLevel(128 * 128),
 m_ysfTXLevel(128 * 128),
 m_p25TXLevel(128 * 128),
 m_nxdnTXLevel(128 * 128),
+m_pocsagTXLevel(128 * 128),
+m_fmTXLevel(128 * 128),
 m_rxDCOffset(DC_OFFSET),
 m_txDCOffset(DC_OFFSET),
 m_ledCount(0U),
@@ -91,12 +91,11 @@ m_dacOverflow(0U),
 m_watchdog(0U),
 m_lockout(false)
 {
-  ::memset(m_dmrState,      0x00U,  70U * sizeof(q15_t));
+  ::memset(m_rrcState,      0x00U,  70U * sizeof(q15_t));
   ::memset(m_gaussianState, 0x00U,  40U * sizeof(q15_t));
   ::memset(m_boxcarState,   0x00U,  30U * sizeof(q15_t));
   ::memset(m_nxdnState,     0x00U, 110U * sizeof(q15_t));
   ::memset(m_nxdnISincState, 0x00U, 60U * sizeof(q15_t));
-  ::memset(m_ysfState,      0x00U,  70U * sizeof(q15_t));
   ::memset(m_dcState,       0x00U,   4U * sizeof(q31_t));
 
   m_dcFilter.numStages = DC_FILTER_STAGES;
@@ -104,9 +103,9 @@ m_lockout(false)
   m_dcFilter.pCoeffs   = DC_FILTER;
   m_dcFilter.postShift = 0;
 
-  m_dmrFilter.numTaps = RRC_0_2_FILTER_LEN;
+  m_rrcFilter.numTaps = RRC_0_2_FILTER_LEN;
-  m_dmrFilter.pState  = m_dmrState;
+  m_rrcFilter.pState  = m_rrcState;
-  m_dmrFilter.pCoeffs = RRC_0_2_FILTER;
+  m_rrcFilter.pCoeffs = RRC_0_2_FILTER;
 
   m_gaussianFilter.numTaps = GAUSSIAN_0_5_FILTER_LEN;
   m_gaussianFilter.pState  = m_gaussianState;
@@ -124,10 +123,6 @@ m_lockout(false)
   m_nxdnISincFilter.pState  = m_nxdnISincState;
   m_nxdnISincFilter.pCoeffs = NXDN_ISINC_FILTER;
 
-  m_ysfFilter.numTaps = RRC_0_2_FILTER_LEN;
-  m_ysfFilter.pState  = m_ysfState;
-  m_ysfFilter.pCoeffs = RRC_0_2_FILTER;
-
   initInt();
   
   selfTest();
@@ -143,94 +138,75 @@ void CIO::selfTest()
     // We exclude PTT to avoid trigger the transmitter
     setLEDInt(ledValue);
     setCOSInt(ledValue);
-#if defined(ARDUINO_MODE_PINS)
+#if defined(MODE_LEDS)
     setDStarInt(ledValue);
     setDMRInt(ledValue);
     setYSFInt(ledValue);
     setP25Int(ledValue);
     setNXDNInt(ledValue);
+    setPOCSAGInt(ledValue);
+    setFMInt(ledValue);
 #endif
     delayInt(250);
   }
 
-#if defined(ARDUINO_MODE_PINS)
+#if defined(MODE_LEDS)
   setDStarInt(true);
   setDMRInt(false);
   setYSFInt(false);
   setP25Int(false);
   setNXDNInt(false);
+  setPOCSAGInt(false);
+  setFMInt(false);
 
   delayInt(250);
-
-  setDStarInt(true);
   setDMRInt(true);
-  setYSFInt(false);
-  setP25Int(false);
-  setNXDNInt(false);
 
   delayInt(250);
-
-  setDStarInt(true);
-  setDMRInt(true);
   setYSFInt(true);
-  setP25Int(false);
-  setNXDNInt(false);
 
   delayInt(250);
-
-  setDStarInt(true);
-  setDMRInt(true);
-  setYSFInt(true);
   setP25Int(true);
-  setNXDNInt(false);
 
+#if !defined(USE_ALTERNATE_NXDN_LEDS)
   delayInt(250);
-
-  setDStarInt(true);
-  setDMRInt(true);
-  setYSFInt(true);
-  setP25Int(true);
   setNXDNInt(true);
+#endif
+
+#if !defined(USE_ALTERNATE_POCSAG_LEDS)
+  delayInt(250);
+  setPOCSAGInt(true);
+#endif
+
+#if !defined(USE_ALTERNATE_FM_LEDS)
+  delayInt(250);
+  setFMInt(true);
 
   delayInt(250);
+  setFMInt(false);
+#endif
 
-  setDStarInt(true);
+#if !defined(USE_ALTERNATE_POCSAG_LEDS)
-  setDMRInt(true);
+  delayInt(250);
-  setYSFInt(true);
+  setPOCSAGInt(false);
-  setP25Int(true);
+#endif
+
+#if !defined(USE_ALTERNATE_NXDN_LEDS)
+  delayInt(250);
   setNXDNInt(false);
+#endif
 
   delayInt(250);
-  
-  setDStarInt(true);
-  setDMRInt(true);
-  setYSFInt(true);
   setP25Int(false);
-  setNXDNInt(false);
 
   delayInt(250);
-
-  setDStarInt(true);
-  setDMRInt(true);
   setYSFInt(false);
-  setP25Int(false);
-  setNXDNInt(false);
 
   delayInt(250);
-  
-  setDStarInt(true);
   setDMRInt(false);
-  setYSFInt(false);
-  setP25Int(false);
-  setNXDNInt(false);
 
   delayInt(250);
-
   setDStarInt(false);
-  setDMRInt(false);
-  setYSFInt(false);
-  setP25Int(false);
-  setNXDNInt(false);
 #endif
 }
 
@@ -252,7 +228,7 @@ void CIO::process()
   if (m_started) {
     // Two seconds timeout
     if (m_watchdog >= 48000U) {
-      if (m_modemState == STATE_DSTAR || m_modemState == STATE_DMR || m_modemState == STATE_YSF || m_modemState == STATE_P25 || m_modemState == STATE_NXDN) {
+      if (m_modemState == STATE_DSTAR || m_modemState == STATE_DMR || m_modemState == STATE_YSF || m_modemState == STATE_P25 || m_modemState == STATE_NXDN || m_modemState == STATE_POCSAG) {
         if (m_modemState == STATE_DMR && m_tx)
           dmrTX.setStart(false);
         m_modemState = STATE_IDLE;
@@ -262,11 +238,15 @@ void CIO::process()
       m_watchdog = 0U;
     }
 
+#if defined(CONSTANT_SRV_LED)
+    setLEDInt(true);
+#else
     if (m_ledCount >= 24000U) {
       m_ledCount = 0U;
       m_ledValue = !m_ledValue;
       setLEDInt(m_ledValue);
     }
+#endif
   } else {
     if (m_ledCount >= 240000U) {
       m_ledCount = 0U;
@@ -308,13 +288,14 @@ void CIO::process()
     if (m_lockout)
       return;
 
-    q31_t dcLevel = 0;
+#if defined(USE_DCBLOCKER)
-    q31_t dcValues[RX_BLOCK_SIZE];
     q31_t q31Samples[RX_BLOCK_SIZE];
-
     ::arm_q15_to_q31(samples, q31Samples, RX_BLOCK_SIZE);
+
+    q31_t dcValues[RX_BLOCK_SIZE];
     ::arm_biquad_cascade_df1_q31(&m_dcFilter, q31Samples, dcValues, RX_BLOCK_SIZE);
 
+    q31_t dcLevel = 0;
     for (uint8_t i = 0U; i < RX_BLOCK_SIZE; i++)
       dcLevel += dcValues[i];
     dcLevel /= RX_BLOCK_SIZE;
@@ -324,58 +305,79 @@ void CIO::process()
     q15_t dcSamples[RX_BLOCK_SIZE];
     for (uint8_t i = 0U; i < RX_BLOCK_SIZE; i++)
       dcSamples[i] = samples[i] - offset;
+#endif
 
     if (m_modemState == STATE_IDLE) {
       if (m_dstarEnable) {
         q15_t GMSKVals[RX_BLOCK_SIZE];
+#if defined(USE_DCBLOCKER)
         ::arm_fir_fast_q15(&m_gaussianFilter, dcSamples, GMSKVals, RX_BLOCK_SIZE);
-
+#else
+        ::arm_fir_fast_q15(&m_gaussianFilter, samples, GMSKVals, RX_BLOCK_SIZE);
+#endif
         dstarRX.samples(GMSKVals, rssi, RX_BLOCK_SIZE);
       }
 
       if (m_p25Enable) {
         q15_t P25Vals[RX_BLOCK_SIZE];
+#if defined(USE_DCBLOCKER)
         ::arm_fir_fast_q15(&m_boxcarFilter, dcSamples, P25Vals, RX_BLOCK_SIZE);
-
+#else
+        ::arm_fir_fast_q15(&m_boxcarFilter, samples, P25Vals, RX_BLOCK_SIZE);
+#endif
         p25RX.samples(P25Vals, rssi, RX_BLOCK_SIZE);
       }
 
       if (m_nxdnEnable) {
-        q15_t NXDNVals[RX_BLOCK_SIZE];
         q15_t NXDNValsTmp[RX_BLOCK_SIZE];
+#if defined(USE_DCBLOCKER)
         ::arm_fir_fast_q15(&m_nxdnFilter, dcSamples, NXDNValsTmp, RX_BLOCK_SIZE);
+#else
+        ::arm_fir_fast_q15(&m_nxdnFilter, samples, NXDNValsTmp, RX_BLOCK_SIZE);
+#endif
+        q15_t NXDNVals[RX_BLOCK_SIZE];
         ::arm_fir_fast_q15(&m_nxdnISincFilter, NXDNValsTmp, NXDNVals, RX_BLOCK_SIZE);
 
         nxdnRX.samples(NXDNVals, rssi, RX_BLOCK_SIZE);
       }
 
-      if (m_ysfEnable) {
+      if (m_dmrEnable || m_ysfEnable) {
-        q15_t YSFVals[RX_BLOCK_SIZE];
+        q15_t RRCVals[RX_BLOCK_SIZE];
-        ::arm_fir_fast_q15(&m_ysfFilter, dcSamples, YSFVals, RX_BLOCK_SIZE);
+        ::arm_fir_fast_q15(&m_rrcFilter, samples, RRCVals, RX_BLOCK_SIZE);
 
-        ysfRX.samples(YSFVals, rssi, RX_BLOCK_SIZE);
+        if (m_ysfEnable)
-      }
+          ysfRX.samples(RRCVals, rssi, RX_BLOCK_SIZE);
 
         if (m_dmrEnable) {
-        q15_t DMRVals[RX_BLOCK_SIZE];
-        ::arm_fir_fast_q15(&m_dmrFilter, samples, DMRVals, RX_BLOCK_SIZE);
-
           if (m_duplex)
-          dmrIdleRX.samples(DMRVals, RX_BLOCK_SIZE);
+            dmrIdleRX.samples(RRCVals, RX_BLOCK_SIZE);
           else
-          dmrDMORX.samples(DMRVals, rssi, RX_BLOCK_SIZE);
+            dmrDMORX.samples(RRCVals, rssi, RX_BLOCK_SIZE);
+        }
+      }
+
+      if (m_fmEnable) {
+        bool cos = getCOSInt();
+#if defined(USE_DCBLOCKER)
+        fm.samples(cos, dcSamples, RX_BLOCK_SIZE);
+#else
+        fm.samples(cos, samples, RX_BLOCK_SIZE);
+#endif
       }
     } else if (m_modemState == STATE_DSTAR) {
       if (m_dstarEnable) {
         q15_t GMSKVals[RX_BLOCK_SIZE];
+#if defined(USE_DCBLOCKER)
         ::arm_fir_fast_q15(&m_gaussianFilter, dcSamples, GMSKVals, RX_BLOCK_SIZE);
-
+#else
+        ::arm_fir_fast_q15(&m_gaussianFilter, samples, GMSKVals, RX_BLOCK_SIZE);
+#endif
         dstarRX.samples(GMSKVals, rssi, RX_BLOCK_SIZE);
       }
     } else if (m_modemState == STATE_DMR) {
       if (m_dmrEnable) {
         q15_t DMRVals[RX_BLOCK_SIZE];
-        ::arm_fir_fast_q15(&m_dmrFilter, samples, DMRVals, RX_BLOCK_SIZE);
+        ::arm_fir_fast_q15(&m_rrcFilter, samples, DMRVals, RX_BLOCK_SIZE);
 
         if (m_duplex) {
           // If the transmitter isn't on, use the DMR idle RX to detect the wakeup CSBKs
@@ -390,26 +392,43 @@ void CIO::process()
     } else if (m_modemState == STATE_YSF) {
       if (m_ysfEnable) {
         q15_t YSFVals[RX_BLOCK_SIZE];
-        ::arm_fir_fast_q15(&m_ysfFilter, dcSamples, YSFVals, RX_BLOCK_SIZE);
+#if defined(USE_DCBLOCKER)
-
+        ::arm_fir_fast_q15(&m_rrcFilter, dcSamples, YSFVals, RX_BLOCK_SIZE);
+#else
+        ::arm_fir_fast_q15(&m_rrcFilter, samples, YSFVals, RX_BLOCK_SIZE);
+#endif
         ysfRX.samples(YSFVals, rssi, RX_BLOCK_SIZE);
       }
     } else if (m_modemState == STATE_P25) {
       if (m_p25Enable) {
         q15_t P25Vals[RX_BLOCK_SIZE];
+#if defined(USE_DCBLOCKER)
         ::arm_fir_fast_q15(&m_boxcarFilter, dcSamples, P25Vals, RX_BLOCK_SIZE);
-
+#else
+        ::arm_fir_fast_q15(&m_boxcarFilter, samples, P25Vals, RX_BLOCK_SIZE);
+#endif
         p25RX.samples(P25Vals, rssi, RX_BLOCK_SIZE);
       }
     } else if (m_modemState == STATE_NXDN) {
       if (m_nxdnEnable) {
-        q15_t NXDNVals[RX_BLOCK_SIZE];
         q15_t NXDNValsTmp[RX_BLOCK_SIZE];
+#if defined(USE_DCBLOCKER)
         ::arm_fir_fast_q15(&m_nxdnFilter, dcSamples, NXDNValsTmp, RX_BLOCK_SIZE);
+#else
+        ::arm_fir_fast_q15(&m_nxdnFilter, samples, NXDNValsTmp, RX_BLOCK_SIZE);
+#endif
+        q15_t NXDNVals[RX_BLOCK_SIZE];
         ::arm_fir_fast_q15(&m_nxdnISincFilter, NXDNValsTmp, NXDNVals, RX_BLOCK_SIZE);
 
         nxdnRX.samples(NXDNVals, rssi, RX_BLOCK_SIZE);
       }
+    } else if (m_modemState == STATE_FM) {
+      bool cos = getCOSInt();
+#if defined(USE_DCBLOCKER)
+      fm.samples(cos, dcSamples, RX_BLOCK_SIZE);
+#else
+      fm.samples(cos, samples, RX_BLOCK_SIZE);
+#endif
     } else if (m_modemState == STATE_DSTARCAL) {
       q15_t GMSKVals[RX_BLOCK_SIZE];
       ::arm_fir_fast_q15(&m_gaussianFilter, samples, GMSKVals, RX_BLOCK_SIZE);
@@ -452,6 +471,12 @@ void CIO::write(MMDVM_STATE mode, q15_t* samples, uint16_t length, const uint8_t
     case STATE_NXDN:
       txLevel = m_nxdnTXLevel;
       break;
+    case STATE_POCSAG:
+      txLevel = m_pocsagTXLevel;
+      break;
+    case STATE_FM:
+      txLevel = m_fmTXLevel;
+      break;
     default:
       txLevel = m_cwIdTXLevel;
       break;
@@ -493,16 +518,18 @@ void CIO::setADCDetection(bool detect)
 
 void CIO::setMode()
 {
-#if defined(ARDUINO_MODE_PINS)
+#if defined(MODE_LEDS)
   setDStarInt(m_modemState == STATE_DSTAR);
   setDMRInt(m_modemState   == STATE_DMR);
   setYSFInt(m_modemState   == STATE_YSF);
   setP25Int(m_modemState   == STATE_P25);
   setNXDNInt(m_modemState  == STATE_NXDN);
+  setPOCSAGInt(m_modemState  == STATE_POCSAG);
+  setFMInt(m_modemState == STATE_FM);
 #endif
 }
 
-void CIO::setParameters(bool rxInvert, bool txInvert, bool pttInvert, uint8_t rxLevel, uint8_t cwIdTXLevel, uint8_t dstarTXLevel, uint8_t dmrTXLevel, uint8_t ysfTXLevel, uint8_t p25TXLevel, uint8_t nxdnTXLevel, int16_t txDCOffset, int16_t rxDCOffset)
+void CIO::setParameters(bool rxInvert, bool txInvert, bool pttInvert, uint8_t rxLevel, uint8_t cwIdTXLevel, uint8_t dstarTXLevel, uint8_t dmrTXLevel, uint8_t ysfTXLevel, uint8_t p25TXLevel, uint8_t nxdnTXLevel, uint8_t pocsagTXLevel, uint8_t fmTXLevel, int16_t txDCOffset, int16_t rxDCOffset)
 {
   m_pttInvert = pttInvert;
 
@@ -513,6 +540,8 @@ void CIO::setParameters(bool rxInvert, bool txInvert, bool pttInvert, uint8_t rx
   m_ysfTXLevel    = q15_t(ysfTXLevel * 128);
   m_p25TXLevel    = q15_t(p25TXLevel * 128);
   m_nxdnTXLevel   = q15_t(nxdnTXLevel * 128);
+  m_pocsagTXLevel = q15_t(pocsagTXLevel * 128);
+  m_fmTXLevel     = q15_t(fmTXLevel * 128);
 
   m_rxDCOffset   = DC_OFFSET + rxDCOffset;
   m_txDCOffset   = DC_OFFSET + txDCOffset;
@@ -526,6 +555,7 @@ void CIO::setParameters(bool rxInvert, bool txInvert, bool pttInvert, uint8_t rx
     m_ysfTXLevel    = -m_ysfTXLevel;
     m_p25TXLevel    = -m_p25TXLevel;
     m_nxdnTXLevel   = -m_nxdnTXLevel;
+    m_pocsagTXLevel = -m_pocsagTXLevel;
   }
 }
 
@@ -562,4 +592,3 @@ bool CIO::hasLockout() const
 {
   return m_lockout;
 }
-

IO.h

@@ -42,7 +42,7 @@ public:
   
   void interrupt();
 
-  void setParameters(bool rxInvert, bool txInvert, bool pttInvert, uint8_t rxLevel, uint8_t cwIdTXLevel, uint8_t dstarTXLevel, uint8_t dmrTXLevel, uint8_t ysfTXLevel, uint8_t p25TXLevel, uint8_t nxdnLevel, int16_t txDCOffset, int16_t rxDCOffset);
+  void setParameters(bool rxInvert, bool txInvert, bool pttInvert, uint8_t rxLevel, uint8_t cwIdTXLevel, uint8_t dstarTXLevel, uint8_t dmrTXLevel, uint8_t ysfTXLevel, uint8_t p25TXLevel, uint8_t nxdnTXLevel, uint8_t pocsagTXLevel, uint8_t fmTXLevel, int16_t txDCOffset, int16_t rxDCOffset);
 
   void getOverflow(bool& adcOverflow, bool& dacOverflow);
 
@@ -66,18 +66,16 @@ private:
   arm_biquad_casd_df1_inst_q31 m_dcFilter;
   q31_t                        m_dcState[4];
 
-  arm_fir_instance_q15 m_dmrFilter;
+  arm_fir_instance_q15 m_rrcFilter;
   arm_fir_instance_q15 m_gaussianFilter;
   arm_fir_instance_q15 m_boxcarFilter;
   arm_fir_instance_q15 m_nxdnFilter;
   arm_fir_instance_q15 m_nxdnISincFilter;
-  arm_fir_instance_q15 m_ysfFilter;
+  q15_t                m_rrcState[70U];           // NoTaps + BlockSize - 1, 42 + 20 - 1 plus some spare
-  q15_t                m_dmrState[70U];           // NoTaps + BlockSize - 1, 42 + 20 - 1 plus some spare
   q15_t                m_gaussianState[40U];      // NoTaps + BlockSize - 1, 12 + 20 - 1 plus some spare
   q15_t                m_boxcarState[30U];        // NoTaps + BlockSize - 1, 6 + 20 - 1 plus some spare
   q15_t                m_nxdnState[110U];         // NoTaps + BlockSize - 1, 82 + 20 - 1 plus some spare
   q15_t                m_nxdnISincState[60U];     // NoTaps + BlockSize - 1, 32 + 20 - 1 plus some spare
-  q15_t                m_ysfState[70U];           // NoTaps + BlockSize - 1, 42 + 20 - 1 plus some spare
 
   bool                 m_pttInvert;
   q15_t                m_rxLevel;
@@ -87,6 +85,8 @@ private:
   q15_t                m_ysfTXLevel;
   q15_t                m_p25TXLevel;
   q15_t                m_nxdnTXLevel;
+  q15_t                m_pocsagTXLevel;
+  q15_t                m_fmTXLevel;
 
   uint16_t             m_rxDCOffset;
   uint16_t             m_txDCOffset;
@@ -118,9 +118,10 @@ private:
   void setYSFInt(bool on);
   void setP25Int(bool on);
   void setNXDNInt(bool on);
+  void setPOCSAGInt(bool on);
+  void setFMInt(bool on);
   
   void delayInt(unsigned int dly);
 };
 
 #endif
-

IODue.cpp

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2015,2016,2017,2018 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2015,2016,2017,2018,2020 by Jonathan Naylor G4KLX
  *   Copyright (C) 2015 by Jim Mclaughlin KI6ZUM
  *   Copyright (C) 2016 by Colin Durbridge G4EML
  *
@@ -34,6 +34,8 @@
 #define PIN_YSF                18
 #define PIN_P25                19
 #define PIN_NXDN               20
+#define PIN_POCSAG             4
+#define PIN_FM                 5
 #define ADC_CHER_Chan          (1<<7)                 // ADC on Due pin A0  - Due AD7 - (1 << 7)
 #define ADC_ISR_EOC_Chan       ADC_ISR_EOC7
 #define ADC_CDR_Chan           7
@@ -48,6 +50,8 @@
 #define PIN_YSF                7
 #define PIN_P25                6
 #define PIN_NXDN               5
+#define PIN_POCSAG             4
+#define PIN_FM                 3
 #define ADC_CHER_Chan          (1<<13)                // ADC on Due pin A11 - Due AD13 - (1 << 13)
 #define ADC_ISR_EOC_Chan       ADC_ISR_EOC13
 #define ADC_CDR_Chan           13
@@ -64,6 +68,8 @@
 #define PIN_YSF                7
 #define PIN_P25                6
 #define PIN_NXDN               5
+#define PIN_POCSAG             4
+#define PIN_FM                 3
 #define ADC_CHER_Chan          (1<<7)                 // ADC on Due pin A0  - Due AD7 - (1 << 7)
 #define ADC_ISR_EOC_Chan       ADC_ISR_EOC7
 #define ADC_CDR_Chan           7
@@ -92,14 +98,22 @@ void CIO::initInt()
   pinMode(PIN_LED,    OUTPUT);
   pinMode(PIN_COS,    INPUT);
 
-#if defined(ARDUINO_MODE_PINS)
+#if defined(MODE_LEDS)
   // Set up the mode output pins
   pinMode(PIN_DSTAR,  OUTPUT);
   pinMode(PIN_DMR,    OUTPUT);
   pinMode(PIN_YSF,    OUTPUT);
   pinMode(PIN_P25,    OUTPUT);
+#if !defined(USE_ALTERNATE_NXDN_LEDS)
   pinMode(PIN_NXDN,   OUTPUT);
 #endif
+#if !defined(USE_ALTERNATE_POCSAG_LEDS)
+  pinMode(PIN_POCSAG, OUTPUT);
+#endif
+#if !defined(USE_ALTERNATE_POCSAG_LEDS)
+  pinMode(PIN_FM,     OUTPUT);
+#endif
+#endif
 }
 
 void CIO::startInt()
@@ -232,7 +246,32 @@ void CIO::setP25Int(bool on)
 
 void CIO::setNXDNInt(bool on)
 {
+#if defined(USE_ALTERNATE_NXDN_LEDS)
+  digitalWrite(PIN_YSF, on ? HIGH : LOW);
+  digitalWrite(PIN_P25, on ? HIGH : LOW);
+#else
   digitalWrite(PIN_NXDN, on ? HIGH : LOW);
+#endif
+}
+
+void CIO::setPOCSAGInt(bool on)
+{
+#if defined(USE_ALTERNATE_POCSAG_LEDS)
+  digitalWrite(PIN_DSTAR, on ? HIGH : LOW);
+  digitalWrite(PIN_DMR,   on ? HIGH : LOW);
+#else
+  digitalWrite(PIN_POCSAG, on ? HIGH : LOW);
+#endif
+}
+
+void CIO::setFMInt(bool on)
+{
+#if defined(USE_ALTERNATE_FM_LEDS)
+  digitalWrite(PIN_DSTAR, on ? HIGH : LOW);
+  digitalWrite(PIN_YSF,   on ? HIGH : LOW);
+#else
+  digitalWrite(PIN_FM, on ? HIGH : LOW);
+#endif
 }
 
 void CIO::delayInt(unsigned int dly)
@@ -241,4 +280,3 @@ void CIO::delayInt(unsigned int dly)
 }
 
 #endif
-

IOSTM.cpp

@@ -1,7 +1,7 @@
 /*
  *   Copyright (C) 2016 by Jim McLaughlin KI6ZUM
  *   Copyright (C) 2016,2017,2018 by Andy Uribe CA6JAU
- *   Copyright (C) 2017,2018 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2017,2018,2020 by Jonathan Naylor G4KLX
  *
  *   This program is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by
@@ -24,7 +24,120 @@
 
 #if defined(STM32F4XX) || defined(STM32F7XX)
 
-#if defined(STM32F4_DISCOVERY)
+#if defined(STM32F4_RPT_HAT_TGO)
+/*
+Pin definitions for MMDVM_RPT_Hat Pi-Hat BG4TGO  board::
+
+PTT      PB13   output           CN10 Pin30
+COSLED   PB14   output           CN10 Pin28
+LED      PA5    output           CN10 Pin11
+COS      PB15   input            CN10 Pin26
+
+DSTAR    PB10   output           CN10 Pin25
+DMR      PB4    output           CN10 Pin27
+YSF      PB5    output           CN10 Pin29
+P25      PB3    output           CN10 Pin31
+NXDN     PA10   output           CN10 Pin33
+POCSAG   PB12   output           CN10 Pin16
+
+MDSTAR   PC4    output           CN10 Pin34
+MDMR     PC5    output           CN10 Pin6
+MYSF     PC2    output           CN7  Pin35
+MP25     PC3    output           CN7  Pin37
+MNXDN    PC6    output           CN10 Pin4
+MPOCSAG  PC8    output           CN10 Pin2
+
+RX       PA0    analog input     CN7 Pin28
+RSSI     PA1    analog input     CN7 Pin30
+TX       PA4    analog output    CN7 Pin32
+
+EXT_CLK  PA15   input            CN7 Pin17
+*/
+
+#define PIN_COS           GPIO_Pin_15
+#define PORT_COS          GPIOB
+#define RCC_Per_COS       RCC_AHB1Periph_GPIOB
+
+#define PIN_PTT           GPIO_Pin_13
+#define PORT_PTT          GPIOB
+#define RCC_Per_PTT       RCC_AHB1Periph_GPIOB
+
+#define PIN_COSLED        GPIO_Pin_14
+#define PORT_COSLED       GPIOB
+#define RCC_Per_COSLED    RCC_AHB1Periph_GPIOB
+
+#define PIN_LED           GPIO_Pin_5
+#define PORT_LED          GPIOA
+#define RCC_Per_LED       RCC_AHB1Periph_GPIOA
+
+#define PIN_P25           GPIO_Pin_3
+#define PORT_P25          GPIOB
+#define RCC_Per_P25       RCC_AHB1Periph_GPIOB
+
+#define PIN_NXDN          GPIO_Pin_10
+#define PORT_NXDN         GPIOA
+#define RCC_Per_NXDN      RCC_AHB1Periph_GPIOA
+
+#define PIN_POCSAG        GPIO_Pin_12
+#define PORT_POCSAG       GPIOB
+#define RCC_Per_POCSAG    RCC_AHB1Periph_GPIOB
+
+#define PIN_DSTAR         GPIO_Pin_10
+#define PORT_DSTAR        GPIOB
+#define RCC_Per_DSTAR     RCC_AHB1Periph_GPIOB
+
+#define PIN_DMR           GPIO_Pin_4
+#define PORT_DMR          GPIOB
+#define RCC_Per_DMR       RCC_AHB1Periph_GPIOB
+
+#define PIN_YSF           GPIO_Pin_5
+#define PORT_YSF          GPIOB
+#define RCC_Per_YSF       RCC_AHB1Periph_GPIOB
+
+#if defined(MODE_PINS)
+#define PIN_MP25          GPIO_Pin_3
+#define PORT_MP25         GPIOC
+#define RCC_Per_MP25      RCC_AHB1Periph_GPIOC
+
+#define PIN_MNXDN         GPIO_Pin_6
+#define PORT_MNXDN        GPIOC
+#define RCC_Per_MNXDN     RCC_AHB1Periph_GPIOC
+
+#define PIN_MDSTAR        GPIO_Pin_4
+#define PORT_MDSTAR       GPIOC
+#define RCC_Per_MDSTAR    RCC_AHB1Periph_GPIOC
+
+#define PIN_MDMR          GPIO_Pin_5
+#define PORT_MDMR         GPIOC
+#define RCC_Per_MDMR      RCC_AHB1Periph_GPIOC
+
+#define PIN_MYSF          GPIO_Pin_2
+#define PORT_MYSF         GPIOC
+#define RCC_Per_MYSF      RCC_AHB1Periph_GPIOC
+
+#define PIN_MPOCSAG       GPIO_Pin_8
+#define PORT_MPOCSAG      GPIOC
+#define RCC_Per_MPOCSAG   RCC_AHB1Periph_GPIOC
+#endif
+
+#define PIN_EXT_CLK       GPIO_Pin_15
+#define SRC_EXT_CLK       GPIO_PinSource15
+#define PORT_EXT_CLK      GPIOA
+
+#define PIN_RX            GPIO_Pin_0
+#define PIN_RX_CH         ADC_Channel_0
+#define PORT_RX           GPIOA
+#define RCC_Per_RX        RCC_AHB1Periph_GPIOA
+
+#define PIN_RSSI          GPIO_Pin_1
+#define PIN_RSSI_CH       ADC_Channel_1
+#define PORT_RSSI         GPIOA
+#define RCC_Per_RSSI      RCC_AHB1Periph_GPIOA
+
+#define PIN_TX            GPIO_Pin_4
+#define PIN_TX_CH         DAC_Channel_1
+
+#elif defined(STM32F4_DISCOVERY)
 /*
 Pin definitions for STM32F4 Discovery Board:
 
@@ -113,6 +226,7 @@ DMR      PC8    output
 YSF      PA8    output
 P25      PC9    output
 NXDN     PB1    output
+POCSAG   PB12   output
 
 RX       PA0    analog input
 RSSI     PA7    analog input
@@ -145,6 +259,10 @@ EXT_CLK  PA15   input
 #define PORT_NXDN         GPIOB
 #define RCC_Per_NXDN      RCC_AHB1Periph_GPIOB
 
+#define PIN_POCSAG        GPIO_Pin_12
+#define PORT_POCSAG       GPIOB
+#define RCC_Per_POCSAG    RCC_AHB1Periph_GPIOB
+
 #define PIN_DSTAR         GPIO_Pin_7
 #define PORT_DSTAR        GPIOC
 #define RCC_Per_DSTAR     RCC_AHB1Periph_GPIOC
@@ -188,6 +306,7 @@ DMR      PC8    output
 YSF      PA8    output
 P25      PC9    output
 NXDN     PB1    output
+POCSAG   PB12   output
 
 RX       PA0    analog input
 RSSI     PA7    analog input
@@ -220,6 +339,10 @@ EXT_CLK  PA15   input
 #define PORT_NXDN         GPIOB
 #define RCC_Per_NXDN      RCC_AHB1Periph_GPIOB
 
+#define PIN_POCSAG        GPIO_Pin_12
+#define PORT_POCSAG       GPIOB
+#define RCC_Per_POCSAG    RCC_AHB1Periph_GPIOB
+
 #define PIN_DSTAR         GPIO_Pin_7
 #define PORT_DSTAR        GPIOC
 #define RCC_Per_DSTAR     RCC_AHB1Periph_GPIOC
@@ -263,6 +386,7 @@ DMR      PC8    output
 YSF      PA8    output
 P25      PC9    output
 NXDN     PB1    output
+POCSAG   PB12   output
 
 RX       PA0    analog input
 RSSI     PA7    analog input
@@ -295,6 +419,10 @@ EXT_CLK  PA15   input
 #define PORT_NXDN         GPIOB
 #define RCC_Per_NXDN      RCC_AHB1Periph_GPIOB
 
+#define PIN_POCSAG        GPIO_Pin_12
+#define PORT_POCSAG       GPIOB
+#define RCC_Per_POCSAG    RCC_AHB1Periph_GPIOB
+
 #define PIN_DSTAR         GPIO_Pin_7
 #define PORT_DSTAR        GPIOC
 #define RCC_Per_DSTAR     RCC_AHB1Periph_GPIOC
@@ -324,6 +452,199 @@ EXT_CLK  PA15   input
 #define PIN_TX            GPIO_Pin_4
 #define PIN_TX_CH         DAC_Channel_1
 
+#elif defined(STM32F722_F7M)
+/*
+Pin definitions for MMDVM-F7M Pi-Hat F0DEI board:
+
+PTT      PB13   output
+COSLED   PB14   output
+LED      PB15   output
+COS      PC0    input
+
+DSTAR    PC7    output
+DMR      PC8    output
+YSF      PA8    output
+P25      PC9    output
+NXDN     PB1    output
+POCSAG   PB12   output
+
+RX       PA0    analog input
+RSSI     PA7    analog input
+TX       PA4    analog output
+
+EXT_CLK  PA15   input
+*/
+
+#define PIN_COS           GPIO_Pin_0
+#define PORT_COS          GPIOC
+#define RCC_Per_COS       RCC_AHB1Periph_GPIOC
+
+#define PIN_PTT           GPIO_Pin_13
+#define PORT_PTT          GPIOB
+#define RCC_Per_PTT       RCC_AHB1Periph_GPIOB
+
+#define PIN_COSLED        GPIO_Pin_14
+#define PORT_COSLED       GPIOB
+#define RCC_Per_COSLED    RCC_AHB1Periph_GPIOB
+
+#define PIN_LED           GPIO_Pin_15
+#define PORT_LED          GPIOB
+#define RCC_Per_LED       RCC_AHB1Periph_GPIOB
+
+#define PIN_P25           GPIO_Pin_9
+#define PORT_P25          GPIOC
+#define RCC_Per_P25       RCC_AHB1Periph_GPIOC
+
+#define PIN_NXDN          GPIO_Pin_1
+#define PORT_NXDN         GPIOB
+#define RCC_Per_NXDN      RCC_AHB1Periph_GPIOB
+
+#define PIN_POCSAG        GPIO_Pin_12
+#define PORT_POCSAG       GPIOB
+#define RCC_Per_POCSAG    RCC_AHB1Periph_GPIOB
+
+#define PIN_DSTAR         GPIO_Pin_7
+#define PORT_DSTAR        GPIOC
+#define RCC_Per_DSTAR     RCC_AHB1Periph_GPIOC
+
+#define PIN_DMR           GPIO_Pin_8
+#define PORT_DMR          GPIOC
+#define RCC_Per_DMR       RCC_AHB1Periph_GPIOC
+
+#define PIN_YSF           GPIO_Pin_8
+#define PORT_YSF          GPIOA
+#define RCC_Per_YSF       RCC_AHB1Periph_GPIOA
+
+#define PIN_EXT_CLK       GPIO_Pin_15
+#define SRC_EXT_CLK       GPIO_PinSource15
+#define PORT_EXT_CLK      GPIOA
+
+#define PIN_RX            GPIO_Pin_0
+#define PIN_RX_CH         ADC_Channel_0
+#define PORT_RX           GPIOA
+#define RCC_Per_RX        RCC_AHB1Periph_GPIOA
+
+#define PIN_RSSI          GPIO_Pin_7
+#define PIN_RSSI_CH       ADC_Channel_7
+#define PORT_RSSI         GPIOA
+#define RCC_Per_RSSI      RCC_AHB1Periph_GPIOA
+
+#define PIN_TX            GPIO_Pin_4
+#define PIN_TX_CH         DAC_Channel_1
+
+#elif defined(STM32F722_RPT_HAT)
+/*
+Pin definitions for MMDVM_RPT_Hat Pi-Hat F0DEI DB9MAT DF2ET board:
+
+PTT      PB14   output
+COSLED   PB13   output
+LED      PB12   output
+COS      PC0    input
+
+DSTAR    PB15   output
+DMR      PC6    output
+YSF      PC7    output
+P25      PC8    output
+NXDN     PC9    output
+POCSAG   PA8    output
+
+MDSTAR   PC1    output
+MDMR     PC2    output
+MYSF     PC3    output
+MP25     PC4    output
+MNXDN    PC10   output
+MPOCSAG  PC11   output
+
+RX       PA0    analog input
+RSSI     PA7    analog input
+TX       PA4    analog output
+
+EXT_CLK  PA15   input
+*/
+
+#define PIN_COS           GPIO_Pin_0
+#define PORT_COS          GPIOC
+#define RCC_Per_COS       RCC_AHB1Periph_GPIOC
+
+#define PIN_PTT           GPIO_Pin_14
+#define PORT_PTT          GPIOB
+#define RCC_Per_PTT       RCC_AHB1Periph_GPIOB
+
+#define PIN_COSLED        GPIO_Pin_13
+#define PORT_COSLED       GPIOB
+#define RCC_Per_COSLED    RCC_AHB1Periph_GPIOB
+
+#define PIN_LED           GPIO_Pin_12
+#define PORT_LED          GPIOB
+#define RCC_Per_LED       RCC_AHB1Periph_GPIOB
+
+#define PIN_P25           GPIO_Pin_8
+#define PORT_P25          GPIOC
+#define RCC_Per_P25       RCC_AHB1Periph_GPIOC
+
+#define PIN_NXDN          GPIO_Pin_9
+#define PORT_NXDN         GPIOC
+#define RCC_Per_NXDN      RCC_AHB1Periph_GPIOC
+
+#define PIN_POCSAG        GPIO_Pin_8
+#define PORT_POCSAG       GPIOA
+#define RCC_Per_POCSAG    RCC_AHB1Periph_GPIOA
+
+#define PIN_DSTAR         GPIO_Pin_15
+#define PORT_DSTAR        GPIOB
+#define RCC_Per_DSTAR     RCC_AHB1Periph_GPIOB
+
+#define PIN_DMR           GPIO_Pin_6
+#define PORT_DMR          GPIOC
+#define RCC_Per_DMR       RCC_AHB1Periph_GPIOC
+
+#define PIN_YSF           GPIO_Pin_7
+#define PORT_YSF          GPIOC
+#define RCC_Per_YSF       RCC_AHB1Periph_GPIOC
+
+#if defined(MODE_PINS)
+#define PIN_MP25          GPIO_Pin_4
+#define PORT_MP25         GPIOC
+#define RCC_Per_MP25      RCC_AHB1Periph_GPIOC
+
+#define PIN_MNXDN         GPIO_Pin_10
+#define PORT_MNXDN        GPIOC
+#define RCC_Per_MNXDN     RCC_AHB1Periph_GPIOC
+
+#define PIN_MDSTAR        GPIO_Pin_1
+#define PORT_MDSTAR       GPIOC
+#define RCC_Per_MDSTAR    RCC_AHB1Periph_GPIOC
+
+#define PIN_MDMR          GPIO_Pin_2
+#define PORT_MDMR         GPIOC
+#define RCC_Per_MDMR      RCC_AHB1Periph_GPIOC
+
+#define PIN_MYSF          GPIO_Pin_3
+#define PORT_MYSF         GPIOC
+#define RCC_Per_MYSF      RCC_AHB1Periph_GPIOC
+
+#define PIN_MPOCSAG       GPIO_Pin_11
+#define PORT_MPOCSAG      GPIOC
+#define RCC_Per_MPOCSAG   RCC_AHB1Periph_GPIOC
+#endif
+
+#define PIN_EXT_CLK       GPIO_Pin_15
+#define SRC_EXT_CLK       GPIO_PinSource15
+#define PORT_EXT_CLK      GPIOA
+
+#define PIN_RX            GPIO_Pin_0
+#define PIN_RX_CH         ADC_Channel_0
+#define PORT_RX           GPIOA
+#define RCC_Per_RX        RCC_AHB1Periph_GPIOA
+
+#define PIN_RSSI          GPIO_Pin_7
+#define PIN_RSSI_CH       ADC_Channel_7
+#define PORT_RSSI         GPIOA
+#define RCC_Per_RSSI      RCC_AHB1Periph_GPIOA
+
+#define PIN_TX            GPIO_Pin_4
+#define PIN_TX_CH         DAC_Channel_1
+
 #elif defined(STM32F4_NUCLEO)
 
 #if defined(STM32F4_NUCLEO_MORPHO_HEADER)
@@ -340,12 +661,14 @@ DMR      PB4    output           CN10 Pin27
 YSF      PB5    output           CN10 Pin29
 P25      PB3    output           CN10 Pin31
 NXDN     PA10   output           CN10 Pin33
+POCSAG   PB12   output           CN10 Pin16
 
 MDSTAR   PC4    output           CN10 Pin34
 MDMR     PC5    output           CN10 Pin6
 MYSF     PC2    output           CN7 Pin35
 MP25     PC3    output           CN7 Pin37
 MNXDN    PC6    output           CN10 Pin4
+MPOCSAG  PC8    output           CN10 Pin2
 
 RX       PA0    analog input     CN7 Pin28
 RSSI     PA1    analog input     CN7 Pin30
@@ -378,6 +701,10 @@ EXT_CLK  PA15   input            CN7 Pin17
 #define PORT_NXDN         GPIOA
 #define RCC_Per_NXDN      RCC_AHB1Periph_GPIOA
 
+#define PIN_POCSAG        GPIO_Pin_12
+#define PORT_POCSAG       GPIOB
+#define RCC_Per_POCSAG    RCC_AHB1Periph_GPIOB
+
 #define PIN_DSTAR         GPIO_Pin_10
 #define PORT_DSTAR        GPIOB
 #define RCC_Per_DSTAR     RCC_AHB1Periph_GPIOB
@@ -390,7 +717,7 @@ EXT_CLK  PA15   input            CN7 Pin17
 #define PORT_YSF          GPIOB
 #define RCC_Per_YSF       RCC_AHB1Periph_GPIOB
 
-#if defined(STM32F4_NUCLEO_MODE_PINS)
+#if defined(MODE_PINS)
 #define PIN_MP25          GPIO_Pin_3
 #define PORT_MP25         GPIOC
 #define RCC_Per_MP25      RCC_AHB1Periph_GPIOC
@@ -410,6 +737,10 @@ EXT_CLK  PA15   input            CN7 Pin17
 #define PIN_MYSF          GPIO_Pin_2
 #define PORT_MYSF         GPIOC
 #define RCC_Per_MYSF      RCC_AHB1Periph_GPIOC
+
+#define PIN_MPOCSAG       GPIO_Pin_8
+#define PORT_MPOCSAG      GPIOC
+#define RCC_Per_MPOCSAG   RCC_AHB1Periph_GPIOC
 #endif
 
 #define PIN_EXT_CLK       GPIO_Pin_15
@@ -442,7 +773,8 @@ DSTAR    PA1    output           CN8 Pin2
 DMR      PA4    output           CN8 Pin3
 YSF      PB0    output           CN8 Pin4
 P25      PC1    output           CN8 Pin5
-NXDN     PC0    output           CN8 Pin6
+NXDN     PA3    output           CN9 Pin1
+POCSAG   PB12   output
 
 RX       PA0    analog input     CN8 Pin1
 RSSI     PC0    analog input     CN8 Pin6
@@ -471,9 +803,13 @@ EXT_CLK  PB8    input            CN5 Pin10
 #define PORT_P25          GPIOC
 #define RCC_Per_P25       RCC_AHB1Periph_GPIOC
 
-#define PIN_NXDN          GPIO_Pin_0
+#define PIN_NXDN          GPIO_Pin_3
-#define PORT_NXDN         GPIOC
+#define PORT_NXDN         GPIOA
-#define RCC_Per_NXDN      RCC_AHB1Periph_GPIOC
+#define RCC_Per_NXDN      RCC_AHB1Periph_GPIOA
+
+#define PIN_POCSAG        GPIO_Pin_12
+#define PORT_POCSAG       GPIOB
+#define RCC_Per_POCSAG    RCC_AHB1Periph_GPIOB
 
 #define PIN_DSTAR         GPIO_Pin_1
 #define PORT_DSTAR        GPIOA
@@ -522,6 +858,7 @@ DMR      PB4    output           CN12 Pin27
 YSF      PB5    output           CN12 Pin29
 P25      PB3    output           CN12 Pin31
 NXDN     PA10   output           CN12 Pin33
+POCSAG   PB12   output           CN12 Pin16
 
 MDSTAR   PC4    output           CN12 Pin34
 MDMR     PC5    output           CN12 Pin6
@@ -560,6 +897,10 @@ EXT_CLK  PA15   input            CN11 Pin17
 #define PORT_NXDN         GPIOA
 #define RCC_Per_NXDN      RCC_AHB1Periph_GPIOA
 
+#define PIN_POCSAG        GPIO_Pin_12
+#define PORT_POCSAG       GPIOB
+#define RCC_Per_POCSAG    RCC_AHB1Periph_GPIOB
+
 #define PIN_DSTAR         GPIO_Pin_10
 #define PORT_DSTAR        GPIOB
 #define RCC_Per_DSTAR     RCC_AHB1Periph_GPIOB
@@ -572,7 +913,7 @@ EXT_CLK  PA15   input            CN11 Pin17
 #define PORT_YSF          GPIOB
 #define RCC_Per_YSF       RCC_AHB1Periph_GPIOB
 
-#if defined(STM32F4_NUCLEO_MODE_PINS)
+#if defined(MODE_PINS)
 #define PIN_MP25          GPIO_Pin_3
 #define PORT_MP25         GPIOC
 #define RCC_Per_MP25      RCC_AHB1Periph_GPIOC
@@ -611,8 +952,89 @@ EXT_CLK  PA15   input            CN11 Pin17
 #define PIN_TX            GPIO_Pin_4
 #define PIN_TX_CH         DAC_Channel_1
 
+#elif defined(STM32F4_DVM)
+/*
+Pin definitions for STM32F4 STM32-DVM rev 3 Board:
+
+COS      PB13   input
+PTT      PB12   output
+COSLED   PB4    output
+LED      PB3    output
+
+P25      PB8    output
+NXDN     PB9    output
+DSTAR    PB6    output
+DMR      PB5    output
+YSF      PB7    output
+POCSAG   PC10   output
+
+RX       PB0    analog input
+RSSI     PB1    analog input
+TX       PA4    analog output
+
+EXT_CLK  PA15   input
+*/
+
+#define PIN_COS           GPIO_Pin_13
+#define PORT_COS          GPIOB
+#define RCC_Per_COS       RCC_AHB1Periph_GPIOB
+
+
+#define PIN_PTT           GPIO_Pin_12
+#define PORT_PTT          GPIOB
+#define RCC_Per_PTT       RCC_AHB1Periph_GPIOB
+
+#define PIN_COSLED        GPIO_Pin_4
+#define PORT_COSLED       GPIOB
+#define RCC_Per_COSLED    RCC_AHB1Periph_GPIOB
+
+#define PIN_LED           GPIO_Pin_3
+#define PORT_LED          GPIOB
+#define RCC_Per_LED       RCC_AHB1Periph_GPIOB
+
+#define PIN_P25           GPIO_Pin_8
+#define PORT_P25          GPIOB
+#define RCC_Per_P25       RCC_AHB1Periph_GPIOB
+
+#define PIN_NXDN          GPIO_Pin_9
+#define PORT_NXDN         GPIOB
+#define RCC_Per_NXDN      RCC_AHB1Periph_GPIOB
+
+#define PIN_DSTAR         GPIO_Pin_6
+#define PORT_DSTAR        GPIOB
+#define RCC_Per_DSTAR     RCC_AHB1Periph_GPIOB
+
+#define PIN_DMR           GPIO_Pin_5
+#define PORT_DMR          GPIOB
+#define RCC_Per_DMR       RCC_AHB1Periph_GPIOB
+
+#define PIN_YSF           GPIO_Pin_7
+#define PORT_YSF          GPIOB
+#define RCC_Per_YSF       RCC_AHB1Periph_GPIOB
+
+#define PIN_POCSAG        GPIO_Pin_10
+#define PORT_POCSAG       GPIOC
+#define RCC_Per_POCSAG    RCC_AHB1Periph_GPIOC
+
+#define PIN_EXT_CLK       GPIO_Pin_15
+#define SRC_EXT_CLK       GPIO_PinSource15
+#define PORT_EXT_CLK      GPIOA
+
+#define PIN_RX            GPIO_Pin_0
+#define PIN_RX_CH         ADC_Channel_8
+#define PORT_RX           GPIOB
+#define RCC_Per_RX        RCC_AHB1Periph_GPIOB
+
+#define PIN_RSSI          GPIO_Pin_1
+#define PIN_RSSI_CH       ADC_Channel_9
+#define PORT_RSSI         GPIOB
+#define RCC_Per_RSSI      RCC_AHB1Periph_GPIOB
+
+#define PIN_TX            GPIO_Pin_4
+#define PIN_TX_CH         DAC_Channel_1
+
 #else
-#error "Either STM32F4_DISCOVERY, STM32F4_PI, STM32F722_PI, STM32F4_F4M, STM32F4_NUCLEO or STM32F7_NUCLEO need to be defined"
+#error "Either STM32F4_DISCOVERY, STM32F4_PI, STM32F722_PI, STM32F4_F4M, STM32F722_F7M, STM32F4_DVM, STM32F4_NUCLEO or STM32F7_NUCLEO need to be defined"
 #endif
 
 const uint16_t DC_OFFSET = 2048U;
@@ -661,7 +1083,7 @@ void CIO::initInt()
    GPIO_InitStruct.GPIO_Mode  = GPIO_Mode_IN;
    GPIO_Init(PORT_COS, &GPIO_InitStruct);
 
-#if defined(ARDUINO_MODE_PINS)
+#if defined(MODE_LEDS)
    // DSTAR pin
    RCC_AHB1PeriphClockCmd(RCC_Per_DSTAR, ENABLE);
    GPIO_InitStruct.GPIO_Pin   = PIN_DSTAR;
@@ -686,6 +1108,7 @@ void CIO::initInt()
    GPIO_InitStruct.GPIO_Mode  = GPIO_Mode_OUT;
    GPIO_Init(PORT_P25, &GPIO_InitStruct);
 
+#if !defined(USE_ALTERNATE_NXDN_LEDS)
    // NXDN pin
    RCC_AHB1PeriphClockCmd(RCC_Per_NXDN, ENABLE);
    GPIO_InitStruct.GPIO_Pin   = PIN_NXDN;
@@ -693,7 +1116,16 @@ void CIO::initInt()
    GPIO_Init(PORT_NXDN, &GPIO_InitStruct);
 #endif
 
-#if defined(STM32F4_NUCLEO_MODE_PINS) && defined(STM32F4_NUCLEO_MORPHO_HEADER) && defined(STM32F4_NUCLEO)
+#if !defined(USE_ALTERNATE_POCSAG_LEDS)
+   // POCSAG pin
+   RCC_AHB1PeriphClockCmd(RCC_Per_POCSAG, ENABLE);
+   GPIO_InitStruct.GPIO_Pin   = PIN_POCSAG;
+   GPIO_InitStruct.GPIO_Mode  = GPIO_Mode_OUT;
+   GPIO_Init(PORT_POCSAG, &GPIO_InitStruct);
+#endif
+#endif
+
+#if defined(MODE_PINS) && defined(STM32F4_NUCLEO_MORPHO_HEADER) && (defined(STM32F4_NUCLEO) || defined(STM32F722_RPT_HAT))
    // DSTAR mode pin
    RCC_AHB1PeriphClockCmd(RCC_Per_MDSTAR, ENABLE);
    GPIO_InitStruct.GPIO_Pin   = PIN_MDSTAR;
@@ -718,12 +1150,22 @@ void CIO::initInt()
    GPIO_InitStruct.GPIO_Mode  = GPIO_Mode_OUT;
    GPIO_Init(PORT_MP25, &GPIO_InitStruct);
 
+#if !defined(USE_ALTERNATE_NXDN_LEDS)
    // NXDN mode pin
    RCC_AHB1PeriphClockCmd(RCC_Per_MNXDN, ENABLE);
    GPIO_InitStruct.GPIO_Pin   = PIN_MNXDN;
    GPIO_InitStruct.GPIO_Mode  = GPIO_Mode_OUT;
    GPIO_Init(PORT_MNXDN, &GPIO_InitStruct);
 #endif
+
+#if !defined(USE_ALTERNATE_POCSAG_LEDS)
+   // POCSAG mode pin
+   RCC_AHB1PeriphClockCmd(RCC_Per_MPOCSAG, ENABLE);
+   GPIO_InitStruct.GPIO_Pin   = PIN_MPOCSAG;
+   GPIO_InitStruct.GPIO_Mode  = GPIO_Mode_OUT;
+   GPIO_Init(PORT_MPOCSAG, &GPIO_InitStruct);
+#endif
+#endif
 }
 
 void CIO::startInt()
@@ -933,7 +1375,7 @@ void CIO::setCOSInt(bool on)
 void CIO::setDStarInt(bool on)
 {
    GPIO_WriteBit(PORT_DSTAR, PIN_DSTAR, on ? Bit_SET : Bit_RESET);
-#if defined(STM32F4_NUCLEO_MODE_PINS) && defined(STM32F4_NUCLEO_MORPHO_HEADER) && defined(STM32F4_NUCLEO)
+#if defined(MODE_PINS) && defined(STM32F4_NUCLEO_MORPHO_HEADER) && (defined(STM32F4_NUCLEO) || defined(STM32F722_RPT_HAT))
    GPIO_WriteBit(PORT_MDSTAR, PIN_MDSTAR, on ? Bit_SET : Bit_RESET);
 #endif
 }
@@ -941,7 +1383,7 @@ void CIO::setDStarInt(bool on)
 void CIO::setDMRInt(bool on)
 {
    GPIO_WriteBit(PORT_DMR, PIN_DMR, on ? Bit_SET : Bit_RESET);
-#if defined(STM32F4_NUCLEO_MODE_PINS) && defined(STM32F4_NUCLEO_MORPHO_HEADER) && defined(STM32F4_NUCLEO)
+#if defined(MODE_PINS) && defined(STM32F4_NUCLEO_MORPHO_HEADER) && (defined(STM32F4_NUCLEO) || defined(STM32F722_RPT_HAT))
    GPIO_WriteBit(PORT_MDMR, PIN_MDMR, on ? Bit_SET : Bit_RESET);
 #endif
 }
@@ -949,7 +1391,7 @@ void CIO::setDMRInt(bool on)
 void CIO::setYSFInt(bool on)
 {
    GPIO_WriteBit(PORT_YSF, PIN_YSF, on ? Bit_SET : Bit_RESET);
-#if defined(STM32F4_NUCLEO_MODE_PINS) && defined(STM32F4_NUCLEO_MORPHO_HEADER) && defined(STM32F4_NUCLEO)
+#if defined(MODE_PINS) && defined(STM32F4_NUCLEO_MORPHO_HEADER) && (defined(STM32F4_NUCLEO) || defined(STM32F722_RPT_HAT))
    GPIO_WriteBit(PORT_MYSF, PIN_MYSF, on ? Bit_SET : Bit_RESET);
 #endif
 }
@@ -957,17 +1399,60 @@ void CIO::setYSFInt(bool on)
 void CIO::setP25Int(bool on)
 {
    GPIO_WriteBit(PORT_P25, PIN_P25, on ? Bit_SET : Bit_RESET);
-#if defined(STM32F4_NUCLEO_MODE_PINS) && defined(STM32F4_NUCLEO_MORPHO_HEADER) && defined(STM32F4_NUCLEO)
+#if defined(MODE_PINS) && defined(STM32F4_NUCLEO_MORPHO_HEADER) && (defined(STM32F4_NUCLEO) || defined(STM32F722_RPT_HAT))
    GPIO_WriteBit(PORT_MP25, PIN_MP25, on ? Bit_SET : Bit_RESET);
 #endif
 }
 
 void CIO::setNXDNInt(bool on)
 {
+#if defined(USE_ALTERNATE_NXDN_LEDS)
+   GPIO_WriteBit(PORT_YSF, PIN_YSF, on ? Bit_SET : Bit_RESET);
+   GPIO_WriteBit(PORT_P25, PIN_P25, on ? Bit_SET : Bit_RESET);
+#if defined(MODE_PINS) && defined(STM32F4_NUCLEO_MORPHO_HEADER) && (defined(STM32F4_NUCLEO) || defined(STM32F722_RPT_HAT))
+   GPIO_WriteBit(PORT_MYSF, PIN_MYSF, on ? Bit_SET : Bit_RESET);
+   GPIO_WriteBit(PORT_MP25, PIN_MP25, on ? Bit_SET : Bit_RESET);
+#endif
+#else
    GPIO_WriteBit(PORT_NXDN, PIN_NXDN, on ? Bit_SET : Bit_RESET);
-#if defined(STM32F4_NUCLEO_MODE_PINS) && defined(STM32F4_NUCLEO_MORPHO_HEADER) && defined(STM32F4_NUCLEO)
+#if defined(MODE_PINS) && defined(STM32F4_NUCLEO_MORPHO_HEADER) && (defined(STM32F4_NUCLEO) || defined(STM32F722_RPT_HAT))
    GPIO_WriteBit(PORT_MNXDN, PIN_MNXDN, on ? Bit_SET : Bit_RESET);
 #endif
+#endif
+}
+
+void CIO::setPOCSAGInt(bool on)
+{
+#if defined(USE_ALTERNATE_POCSAG_LEDS)
+   GPIO_WriteBit(PORT_DSTAR, PIN_DSTAR, on ? Bit_SET : Bit_RESET);
+   GPIO_WriteBit(PORT_DMR,   PIN_DMR,   on ? Bit_SET : Bit_RESET);
+#if defined(MODE_PINS) && defined(STM32F4_NUCLEO_MORPHO_HEADER) && (defined(STM32F4_NUCLEO) || defined(STM32F722_RPT_HAT))
+   GPIO_WriteBit(PORT_MDSTAR, PIN_MDSTAR, on ? Bit_SET : Bit_RESET);
+   GPIO_WriteBit(PORT_MDMR,   PIN_MDMR,   on ? Bit_SET : Bit_RESET);
+#endif
+#else
+   GPIO_WriteBit(PORT_POCSAG,  PIN_POCSAG, on ? Bit_SET : Bit_RESET);
+#if defined(MODE_PINS) && defined(STM32F4_NUCLEO_MORPHO_HEADER) && (defined(STM32F4_NUCLEO) || defined(STM32F722_RPT_HAT))
+   GPIO_WriteBit(PORT_MPOCSAG, PIN_MPOCSAG, on ? Bit_SET : Bit_RESET);
+#endif
+#endif
+}
+
+void CIO::setFMInt(bool on)
+{
+#if defined(USE_ALTERNATE_FM_LEDS)
+   GPIO_WriteBit(PORT_DSTAR, PIN_DSTAR, on ? Bit_SET : Bit_RESET);
+   GPIO_WriteBit(PORT_YSF,   PIN_YSF,   on ? Bit_SET : Bit_RESET);
+#if defined(MODE_PINS) && defined(STM32F4_NUCLEO_MORPHO_HEADER) && (defined(STM32F4_NUCLEO) || defined(STM32F722_RPT_HAT))
+   GPIO_WriteBit(PORT_MDSTAR, PIN_MDSTAR, on ? Bit_SET : Bit_RESET);
+   GPIO_WriteBit(PORT_MYSF,   PIN_MYSF,   on ? Bit_SET : Bit_RESET);
+#endif
+#else
+   GPIO_WriteBit(PORT_FM,  PIN_FM, on ? Bit_SET : Bit_RESET);
+#if defined(MODE_PINS) && defined(STM32F4_NUCLEO_MORPHO_HEADER) && (defined(STM32F4_NUCLEO) || defined(STM32F722_RPT_HAT))
+   GPIO_WriteBit(PORT_MFM, PIN_MFM, on ? Bit_SET : Bit_RESET);
+#endif
+#endif
 }
 
 // Simple delay function for STM32

IOSTM_CMSIS.cpp

@@ -1,7 +1,7 @@
 /*
  *   Copyright (C) 2016 by Jim McLaughlin KI6ZUM
  *   Copyright (C) 2016, 2017 by Andy Uribe CA6JAU
- *   Copyright (C) 2017,2018 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2017,2018,2020 by Jonathan Naylor G4KLX
  *   Copyright (C) 2017 by Wojciech Krutnik N0CALL
  *
  *   This program is free software; you can redistribute it and/or modify
@@ -40,6 +40,8 @@ DMR      PB6    output
 YSF      PB8    output
 P25      PB9    output
 NXDN     PB10   output
+POCSAG   PB11   output
+FM       PB12   output
 
 RX       PB0    analog input (ADC1_8)
 RSSI     PB1    analog input (ADC2_9)
@@ -80,6 +82,12 @@ USART1_RXD PA10  input (AF)
 #define PIN_NXDN          10
 #define PORT_NXDN         GPIOB
 #define BB_NXDN           *((bitband_t)BITBAND_PERIPH(&PORT_NXDN->ODR, PIN_NXDN))
+#define PIN_POCSAG        11
+#define PORT_POCSAG       GPIOB
+#define BB_POCSAG         *((bitband_t)BITBAND_PERIPH(&PORT_POCSAG->ODR, PIN_POCSAG))
+#define PIN_FM            12
+#define PORT_FM           GPIOB
+#define BB_FM             *((bitband_t)BITBAND_PERIPH(&PORT_FM->ODR, PIN_FM))
 
 #define PIN_RX            0
 #define PIN_RX_ADC_CH     8
@@ -150,9 +158,9 @@ void GPIOConfigPin(GPIO_TypeDef *port_ptr, uint32_t pin, uint32_t mode_cnf_value
 #if defined(STM32F1_POG)
 void FancyLEDEffect()
 {
-  bitband_t foo[] = {&BB_LED, &BB_COSLED, &BB_PTT, &BB_DMR, &BB_DSTAR, &BB_YSF, &BB_P25};
+  bitband_t foo[] = {&BB_LED, &BB_COSLED, &BB_PTT, &BB_DMR, &BB_DSTAR, &BB_YSF, &BB_P25, &BB_NXDN, &BB_POCSAG, &BB_FM};
    
-  for(int i=0; i<7; i++){
+  for(int i=0; i<10; i++){
     *foo[i] = 0x01;
   }
   GPIOConfigPin(PORT_USART1_TXD, PIN_USART1_TXD, GPIO_CRL_MODE0_1);
@@ -168,12 +176,12 @@ void FancyLEDEffect()
   *((bitband_t)BITBAND_PERIPH(&PORT_USART1_TXD->ODR, PIN_USART1_TXD)) = 0x01;
   
   *foo[0] = 0x01;
-  for(int i=1; i<7; i++){
+  for(int i=1; i<10; i++){
     delay(SystemCoreClock/1000*10);
     *foo[i-1] = 0x00;
     *foo[i] = 0x01;
   }
-  for(int i=5; i>=0; i--){
+  for(int i=10; i>=0; i--){
     delay(SystemCoreClock/1000*10);
     *foo[i+1] = 0x00;
     *foo[i] = 0x01;
@@ -218,7 +226,15 @@ static inline void GPIOInit()
   GPIOConfigPin(PORT_DMR,    PIN_DMR,    GPIO_CRL_MODE0_1);
   GPIOConfigPin(PORT_YSF,    PIN_YSF,    GPIO_CRL_MODE0_1);
   GPIOConfigPin(PORT_P25,    PIN_P25,    GPIO_CRL_MODE0_1);
+#if !defined(USE_ALTERNATE_NXDN_LEDS)
   GPIOConfigPin(PORT_NXDN,   PIN_NXDN,   GPIO_CRL_MODE0_1);
+#endif
+#if !defined(USE_ALTERNATE_POCSAG_LEDS)
+  GPIOConfigPin(PORT_POCSAG, PIN_POCSAG, GPIO_CRL_MODE0_1);
+#endif
+#if !defined(USE_ALTERNATE_FM_LEDS)
+  GPIOConfigPin(PORT_FM,     PIN_FM,     GPIO_CRL_MODE0_1);
+#endif
 
   GPIOConfigPin(PORT_RX, PIN_RX, 0);
 #if defined(SEND_RSSI_DATA)
@@ -360,7 +376,9 @@ void CIO::interrupt()
 {
   uint8_t control  = MARK_NONE;
   uint16_t sample  = DC_OFFSET;
+#if defined(SEND_RSSI_DATA)
   uint16_t rawRSSI = 0U;
+#endif
   bitband_t eoc = (bitband_t)BITBAND_PERIPH(&ADC1->SR, ADC_SR_EOS_Pos);
   bitband_t adon = (bitband_t)BITBAND_PERIPH(&ADC1->CR2, ADC_CR2_ADON_Pos);
 #if defined(SEND_RSSI_DATA)
@@ -431,7 +449,32 @@ void CIO::setP25Int(bool on)
 
 void CIO::setNXDNInt(bool on)
 {
+#if defined(USE_ALTERNATE_NXDN_LEDS)
+  BB_YSF = !!on;
+  BB_P25 = !!on;
+#else
   BB_NXDN = !!on;
+#endif
+}
+
+void CIO::setPOCSAGInt(bool on)
+{
+#if defined(USE_ALTERNATE_POCSAG_LEDS)
+  BB_DSTAR = !!on;
+  BB_DMR   = !!on;
+#else
+  BB_POCSAG = !!on;
+#endif
+}
+
+void CIO::setFMInt(bool on)
+{
+#if defined(USE_ALTERNATE_FM_LEDS)
+  BB_DSTAR = !!on;
+  BB_YSF   = !!on;
+#else
+  BB_FM = !!on;
+#endif
 }
 
 void CIO::delayInt(unsigned int dly)

IOTeensy.cpp

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2016,2017,2018 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2016,2017,2018,2020 by Jonathan Naylor G4KLX
  *
  *   This program is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by
@@ -34,7 +34,15 @@
 #define PIN_DMR                10
 #define PIN_YSF                11
 #define PIN_P25                12
-#define PIN_NXDN               8
+#if defined(__MK20DX256__)
+#define PIN_NXDN               2
+#define PIN_POCSAG             3
+#define PIN_FM                 4
+#else
+#define PIN_NXDN               24
+#define PIN_POCSAG             25
+#define PIN_FM                 26
+#endif
 #define PIN_ADC                5        // A0,  Pin 14
 #define PIN_RSSI               4        // Teensy 3.5/3.6, A16, Pin 35. Teensy 3.1/3.2, A17, Pin 28
 
@@ -58,14 +66,22 @@ void CIO::initInt()
   pinMode(PIN_LED,    OUTPUT);
   pinMode(PIN_COS,    INPUT);
 
-#if defined(ARDUINO_MODE_PINS)
+#if defined(MODE_LEDS)
   // Set up the mode output pins
   pinMode(PIN_DSTAR,  OUTPUT);
   pinMode(PIN_DMR,    OUTPUT);
   pinMode(PIN_YSF,    OUTPUT);
   pinMode(PIN_P25,    OUTPUT);
+#if !defined(USE_ALTERNATE_NXDN_LEDS)
   pinMode(PIN_NXDN,   OUTPUT);
 #endif
+#if !defined(USE_ALTERNATE_POCSAG_LEDS)
+  pinMode(PIN_POCSAG, OUTPUT);
+#endif
+#if !defined(USE_ALTERNATE_FM_LEDS)
+  pinMode(PIN_FM,     OUTPUT);
+#endif
+#endif
 }
 
 void CIO::startInt()
@@ -214,7 +230,32 @@ void CIO::setP25Int(bool on)
 
 void CIO::setNXDNInt(bool on)
 {
+#if defined(USE_ALTERNATE_NXDN_LEDS)
+  digitalWrite(PIN_YSF, on ? HIGH : LOW);
+  digitalWrite(PIN_P25, on ? HIGH : LOW);
+#else
   digitalWrite(PIN_NXDN, on ? HIGH : LOW);
+#endif
+}
+
+void CIO::setPOCSAGInt(bool on)
+{
+#if defined(USE_ALTERNATE_POCSAG_LEDS)
+  digitalWrite(PIN_DSTAR, on ? HIGH : LOW);
+  digitalWrite(PIN_DMR,   on ? HIGH : LOW);
+#else
+  digitalWrite(PIN_POCSAG, on ? HIGH : LOW);
+#endif
+}
+
+void CIO::setFMInt(bool on)
+{
+#if defined(USE_ALTERNATE_FM_LEDS)
+  digitalWrite(PIN_DSTAR, on ? HIGH : LOW);
+  digitalWrite(PIN_YSF,   on ? HIGH : LOW);
+#else
+  digitalWrite(PIN_FM, on ? HIGH : LOW);
+#endif
 }
 
 void CIO::delayInt(unsigned int dly)

MMDVM.cpp

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2015,2016,2017,2018 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2015,2016,2017,2018,2020 by Jonathan Naylor G4KLX
  *   Copyright (C) 2016 by Mathis Schmieder DB9MAT
  *   Copyright (C) 2016 by Colin Durbridge G4EML
  *
@@ -31,6 +31,8 @@ bool m_dmrEnable   = true;
 bool m_ysfEnable    = true;
 bool m_p25Enable    = true;
 bool m_nxdnEnable   = true;
+bool m_pocsagEnable = true;
+bool m_fmEnable     = true;
 
 bool m_duplex = true;
 
@@ -56,11 +58,16 @@ CP25TX     p25TX;
 CNXDNRX    nxdnRX;
 CNXDNTX    nxdnTX;
 
+CPOCSAGTX  pocsagTX;
+
+CFM        fm;
+
 CCalDStarRX calDStarRX;
 CCalDStarTX calDStarTX;
 CCalDMR     calDMR;
 CCalP25     calP25;
 CCalNXDN    calNXDN;
+CCalPOCSAG  calPOCSAG;
 CCalRSSI    calRSSI;
 
 CCWIdTX cwIdTX;
@@ -99,6 +106,12 @@ void loop()
   if (m_nxdnEnable && m_modemState == STATE_NXDN)
     nxdnTX.process();
 
+  if (m_pocsagEnable && (m_modemState == STATE_POCSAG || pocsagTX.busy()))
+    pocsagTX.process();
+
+  if (m_fmEnable && m_modemState == STATE_FM)
+    fm.process();
+
   if (m_modemState == STATE_DSTARCAL)
     calDStarTX.process();
 
@@ -111,6 +124,9 @@ void loop()
   if (m_modemState == STATE_NXDNCAL1K)
     calNXDN.process();
 
+  if (m_modemState == STATE_POCSAGCAL)
+    calPOCSAG.process();
+
   if (m_modemState == STATE_IDLE)
     cwIdTX.process();
 }

MMDVM.ino

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2015,2016,2017,2018 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2015,2016,2017,2018,2020 by Jonathan Naylor G4KLX
  *   Copyright (C) 2016 by Colin Durbridge G4EML
  *
  *   This program is free software; you can redistribute it and/or modify
@@ -28,6 +28,8 @@ bool m_dmrEnable   = true;
 bool m_ysfEnable    = true;
 bool m_p25Enable    = true;
 bool m_nxdnEnable   = true;
+bool m_pocsagEnable = true;
+bool m_fmEnable     = true;
 
 bool m_duplex = true;
 
@@ -53,11 +55,16 @@ CP25TX     p25TX;
 CNXDNRX    nxdnRX;
 CNXDNTX    nxdnTX;
 
+CPOCSAGTX  pocsagTX;
+
+CFM        fm;
+
 CCalDStarRX calDStarRX;
 CCalDStarTX calDStarTX;
 CCalDMR     calDMR;
 CCalP25     calP25;
 CCalNXDN    calNXDN;
+CCalPOCSAG  calPOCSAG;
 CCalRSSI    calRSSI;
 
 CCWIdTX cwIdTX;
@@ -96,6 +103,12 @@ void loop()
   if (m_nxdnEnable && m_modemState == STATE_NXDN)
     nxdnTX.process();
 
+  if (m_pocsagEnable && (m_modemState == STATE_POCSAG || pocsagTX.busy()))
+    pocsagTX.process();
+
+  if (m_fmEnable && m_modemState == STATE_FM)
+    fm.process();
+
   if (m_modemState == STATE_DSTARCAL)
     calDStarTX.process();
 
@@ -108,7 +121,9 @@ void loop()
   if (m_modemState == STATE_NXDNCAL1K)
     calNXDN.process();
 
+  if (m_modemState == STATE_POCSAGCAL)
+    calPOCSAG.process();
+
   if (m_modemState == STATE_IDLE)
     cwIdTX.process();
 }
-

MMDVM_STM32F4xx.coproj

@@ -97,7 +97,7 @@
           <Define name="STM32F446xx"/>
           <Define name="HSE_VALUE=12000000"/>
           <Define name="STM32F4_PI"/>
-          <Define name="ARDUINO_MODE_PINS"/>
+          <Define name="MODE_LEDS"/>
         </DefinedSymbols>
       </Compile>
       <Link useDefault="0">

Makefile

@@ -1,4 +1,4 @@
-#  Copyright (C) 2016,2017 by Andy Uribe CA6JAU
+#  Copyright (C) 2016,2017,2018 by Andy Uribe CA6JAU
 #  Copyright (C) 2016 by Jim McLaughlin KI6ZUM
 
 #  This program is free software; you can redistribute it and/or modify
@@ -126,6 +126,14 @@ DEFS_NUCLEO=-DUSE_STDPERIPH_DRIVER -DSTM32F4XX -DSTM32F446xx -DSTM32F4_NUCLEO -D
 DEFS_NUCLEO_F767=-DUSE_HAL_DRIVER -DSTM32F767xx -DSTM32F7XX -DSTM32F7_NUCLEO -DHSE_VALUE=$(OSC) -DMADEBYMAKEFILE
 # MMDVM-Pi F722 board:
 DEFS_PI_F722=-DUSE_HAL_DRIVER -DSTM32F722xx -DSTM32F7XX -DSTM32F722_PI -DHSE_VALUE=$(OSC) -DMADEBYMAKEFILE
+# MMDVM-F7M F0DEI board:
+DEFS_F7M=-DUSE_HAL_DRIVER -DSTM32F722xx -DSTM32F7XX -DSTM32F722_F7M -DHSE_VALUE=$(OSC) -DMADEBYMAKEFILE
+# MMDVM_RPT_Hat F0DEI, DB9MAT, DF2ET board:
+DEFS_RPT_HAT=-DUSE_HAL_DRIVER -DSTM32F722xx -DSTM32F7XX -DSTM32F722_RPT_HAT -DHSE_VALUE=$(OSC) -DMADEBYMAKEFILE
+# STM32F4 DVM board:
+DEFS_DVM=-DUSE_STDPERIPH_DRIVER -DSTM32F4XX -DSTM32F446xx -DSTM32F4_DVM -DHSE_VALUE=$(OSC) -DMADEBYMAKEFILE
+# MMDVM_RPT_Hat BG4TGO, BG5HHP board:
+DEFS_RPT_HAT_TGO=-DUSE_STDPERIPH_DRIVER -DSTM32F4XX -DSTM32F40_41xxx -DSTM32F4_RPT_HAT_TGO -DHSE_VALUE=$(OSC) -DMADEBYMAKEFILE
 
 # Build compiler flags
 CFLAGS_F4=-c $(MCFLAGS_F4) $(INCLUDES_F4)
@@ -144,7 +152,7 @@ CXXFLAGS=-Os -fno-exceptions -ffunction-sections -fdata-sections -fno-builtin -f
 LDFLAGS=-Os --specs=nano.specs
 
 # Build Rules
-.PHONY: all release dis pi pi_f722 f4m nucleo f767 clean
+.PHONY: all release dis pi pi-f722 f4m nucleo f767 dvm clean
 
 # Default target: Nucleo-64 F446RE board
 all: nucleo
@@ -167,6 +175,24 @@ f4m: CXXFLAGS+=$(CXXFLAGS_F4) $(DEFS_F4M)
 f4m: LDFLAGS+=$(LDFLAGS_F4)
 f4m: release_f4
 
+f7m: GitVersion.h
+f7m: CFLAGS+=$(CFLAGS_F7) $(DEFS_F7M)
+f7m: CXXFLAGS+=$(CXXFLAGS_F7) $(DEFS_F7M)
+f7m: LDFLAGS+=$(LDFLAGS_F722)
+f7m: release_f7
+
+rpt_hat: GitVersion.h
+rpt_hat: CFLAGS+=$(CFLAGS_F7) $(DEFS_RPT_HAT)
+rpt_hat: CXXFLAGS+=$(CXXFLAGS_F7) $(DEFS_RPT_HAT)
+rpt_hat: LDFLAGS+=$(LDFLAGS_F722)
+rpt_hat: release_f7
+
+rpt_hat_tgo: GitVersion.h
+rpt_hat_tgo: CFLAGS+=$(CFLAGS_F4) $(DEFS_RPT_HAT_TGO)
+rpt_hat_tgo: CXXFLAGS+=$(CXXFLAGS_F4) $(DEFS_RPT_HAT_TGO)
+rpt_hat_tgo: LDFLAGS+=$(LDFLAGS_F4)
+rpt_hat_tgo: release_f4
+
 nucleo: GitVersion.h
 nucleo: CFLAGS+=$(CFLAGS_F4) $(DEFS_NUCLEO)
 nucleo: CXXFLAGS+=$(CXXFLAGS_F4) $(DEFS_NUCLEO)
@@ -185,6 +211,12 @@ f767: CXXFLAGS+=$(CXXFLAGS_F7) $(DEFS_NUCLEO_F767)
 f767: LDFLAGS+=$(LDFLAGS_F767)
 f767: release_f7
 
+dvm: GitVersion.h
+dvm: CFLAGS+=$(CFLAGS_F4) $(DEFS_DVM)
+dvm: CXXFLAGS+=$(CXXFLAGS_F4) $(DEFS_DVM)
+dvm: LDFLAGS+=$(LDFLAGS_F4)
+dvm: release_f4
+
 release_f4: $(BINDIR)
 release_f4: $(OBJDIR_F4)
 release_f4: $(BINDIR)/$(BINHEX_F4)
@@ -305,20 +337,21 @@ ifneq ($(wildcard /usr/bin/stm32flash),)
 endif
 
 deploy-f4m: deploy-pi
+deploy-dvm: deploy-pi
 
 deploy-pi-f7:
 ifneq ($(wildcard /usr/local/bin/stm32flash),)
 	-/usr/local/bin/stm32flash -i 20,-21,21:-20,21 /dev/ttyAMA0
-	-/usr/local/bin/stm32ld /dev/ttyAMA0 57600 bin/$(BINBIN_F7)
 	/usr/local/bin/stm32flash -v -w bin/$(BINBIN_F7) -g 0x0 -R -c /dev/ttyAMA0
-endif
 
-ifneq ($(wildcard /usr/bin/stm32flash),)
+else ifneq ($(wildcard /usr/bin/stm32flash),)
 	-/usr/bin/stm32flash -i 20,-21,21:-20,21 /dev/ttyAMA0
-	-/usr/bin/stm32ld /dev/ttyAMA0 57600 bin/$(BINBIN_F7)
 	/usr/bin/stm32flash -v -w bin/$(BINBIN_F7) -g 0x0 -R -c /dev/ttyAMA0
 endif
 
+deploy-f7m:   deploy-pi-f7
+deploy-rpt_hat: deploy-pi-f7
+
 # Export the current git version if the index file exists, else 000...
 GitVersion.h:
 ifdef SYSTEMROOT

Makefile.CMSIS

@@ -25,7 +25,7 @@ STARTUP:=$(SYSDIR)/startup_stm32f105xc.S
 STARTUP_DEFS=
 
 # Include directory for CMSIS
-CMSISDIR:=/opt/STM32Cube_FW_F1_V1.4.0/Drivers/CMSIS
+CMSISDIR:=STM32F10X_Lib/CMSIS
 
 # Libraries
 LIBDIR:=
@@ -65,7 +65,7 @@ COMMON_FLAGS =-mthumb -mlittle-endian -mcpu=$(MCPU)
 COMMON_FLAGS+= -Wall
 COMMON_FLAGS+= -I. -I$(CMSISDIR)/Include -I$(CMSISDIR)/Device/ST/STM32F1xx/Include -I$(SYSDIR)
 COMMON_FLAGS+=  $(addprefix -I,$(INCDIR))
-COMMON_FLAGS+= -D$(MCU)
+COMMON_FLAGS+= -D$(MCU) -DMADEBYMAKEFILE -DSTM32F1
 COMMON_FLAGS+= -Os -flto -ffunction-sections -fdata-sections
 COMMON_FLAGS+= -g
 # Assembler flags
@@ -91,7 +91,7 @@ DEPENDS:=$(CSRC:%.c=$(OBJDIR)/%.d) $(CXXSRC:%.cpp=$(OBJDIR)/%.d)
 
 # Targets
 .PHONY: all
-all: $(DIS) $(HEX)
+all: GitVersion.h $(DIS) $(HEX)
 	$(SIZE) $(ELF)
 
 .PHONY: program
@@ -116,7 +116,7 @@ debug: $(ELF)
 
 .PHONY: clean
 clean:
-	$(RM) $(OBJ) $(HEX) $(ELF) $(DIS) $(MAP) $(DEPENDS)
+	$(RM) $(OBJ) $(HEX) $(ELF) $(DIS) $(MAP) $(DEPENDS) GitVersion.h
 
 # implicit rules
 .elf.hex:
@@ -149,3 +149,17 @@ $(DIS): $(ELF)
 
 # include dependecies
 -include $(DEPENDS)
+
+# Export the current git version if the index file exists, else 000...
+GitVersion.h:
+ifdef SYSTEMROOT
+	echo #define GITVERSION "0000000" > $@
+else ifdef SystemRoot
+	echo #define GITVERSION "0000000" > $@
+else
+ifneq ("$(wildcard .git/index)","")
+	echo "#define GITVERSION \"$(shell git rev-parse --short HEAD)\"" > $@
+else
+	echo "#define GITVERSION \"0000000\"" > $@
+endif
+endif

NXDNTX.cpp

@@ -45,7 +45,7 @@ const uint8_t NXDN_PREAMBLE[] = {0x57U, 0x75U, 0xFDU};
 const uint8_t NXDN_SYNC = 0x5FU;
 
 CNXDNTX::CNXDNTX() :
-m_buffer(2000U),
+m_buffer(TX_BUFFER_LEN),
 m_modFilter(),
 m_sincFilter(),
 m_modState(),

P25Defines.h

@@ -1,5 +1,6 @@
 /*
  *   Copyright (C) 2016,2017 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2018 by Bryan Biedenkapp <[email protected]>
  *
  *   This program is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by
@@ -41,14 +42,25 @@ const unsigned int P25_TERM_FRAME_LENGTH_BITS      = P25_TERM_FRAME_LENGTH_BYTES
 const unsigned int P25_TERM_FRAME_LENGTH_SYMBOLS   = P25_TERM_FRAME_LENGTH_BYTES * 4U;
 const unsigned int P25_TERM_FRAME_LENGTH_SAMPLES   = P25_TERM_FRAME_LENGTH_SYMBOLS * P25_RADIO_SYMBOL_LENGTH;
 
+const unsigned int P25_TSDU_FRAME_LENGTH_BYTES     = 45U;
+const unsigned int P25_TSDU_FRAME_LENGTH_BITS      = P25_TSDU_FRAME_LENGTH_BYTES * 8U; 
+const unsigned int P25_TSDU_FRAME_LENGTH_SYMBOLS   = P25_TSDU_FRAME_LENGTH_BYTES * 4U; 
+const unsigned int P25_TSDU_FRAME_LENGTH_SAMPLES   = P25_TSDU_FRAME_LENGTH_SYMBOLS * P25_RADIO_SYMBOL_LENGTH;
+
+const unsigned int P25_PDU_HDR_FRAME_LENGTH_BYTES = 45U;
+const unsigned int P25_PDU_HDR_FRAME_LENGTH_BITS = P25_PDU_HDR_FRAME_LENGTH_BYTES * 8U;
+const unsigned int P25_PDU_HDR_FRAME_LENGTH_SYMBOLS = P25_PDU_HDR_FRAME_LENGTH_BYTES * 4U;
+const unsigned int P25_PDU_HDR_FRAME_LENGTH_SAMPLES = P25_PDU_HDR_FRAME_LENGTH_SYMBOLS * P25_RADIO_SYMBOL_LENGTH;
+
 const unsigned int P25_SYNC_LENGTH_BYTES   = 6U;
 const unsigned int P25_SYNC_LENGTH_BITS    = P25_SYNC_LENGTH_BYTES * 8U;
 const unsigned int P25_SYNC_LENGTH_SYMBOLS = P25_SYNC_LENGTH_BYTES * 4U;
 const unsigned int P25_SYNC_LENGTH_SAMPLES = P25_SYNC_LENGTH_SYMBOLS * P25_RADIO_SYMBOL_LENGTH;
 
-const unsigned int P25_NID_LENGTH_BITS     = 64U;
+const unsigned int P25_NID_LENGTH_BYTES    = 8U;
-const unsigned int P25_NID_LENGTH_SYMBOLS  = 32U;
+const unsigned int P25_NID_LENGTH_BITS     = P25_NID_LENGTH_BYTES * 8U;
-const unsigned int P25_NID_LENGTH_SAMPLESS = P25_NID_LENGTH_SYMBOLS * P25_RADIO_SYMBOL_LENGTH;
+const unsigned int P25_NID_LENGTH_SYMBOLS  = P25_NID_LENGTH_BYTES * 4U; 
+const unsigned int P25_NID_LENGTH_SAMPLES  = P25_NID_LENGTH_SYMBOLS * P25_RADIO_SYMBOL_LENGTH;
 
 const uint8_t P25_SYNC_BYTES[] = {0x55U, 0x75U, 0xF5U, 0xFFU, 0x77U, 0xFFU};
 const uint8_t P25_SYNC_BYTES_LENGTH  = 6U;
@@ -65,5 +77,13 @@ const int8_t P25_SYNC_SYMBOLS_VALUES[] = {+3, +3, +3, +3, +3, -3, +3, +3, -3, -3
 const uint32_t P25_SYNC_SYMBOLS      = 0x00FB30A0U;
 const uint32_t P25_SYNC_SYMBOLS_MASK = 0x00FFFFFFU;
 
+const uint8_t P25_DUID_HDU = 0x00U;             // Header Data Unit
+const uint8_t P25_DUID_TDU = 0x03U;             // Simple Terminator Data Unit
+const uint8_t P25_DUID_LDU1 = 0x05U;            // Logical Link Data Unit 1
+const uint8_t P25_DUID_TSDU = 0x07U;            // Trunking System Data Unit
+const uint8_t P25_DUID_LDU2 = 0x0AU;            // Logical Link Data Unit 2
+const uint8_t P25_DUID_PDU = 0x0CU;             // Packet Data Unit 
+const uint8_t P25_DUID_TDULC = 0x0FU;           // Terminator Data Unit with Link Control
+
 #endif
 

P25RX.cpp

@@ -1,5 +1,6 @@
 /*
  *   Copyright (C) 2009-2017 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2018 by Bryan Biedenkapp <[email protected]>
  *
  *   This program is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by
@@ -23,6 +24,8 @@
 
 const q15_t SCALING_FACTOR = 18750;      // Q15(0.57)
 
+const uint8_t CORRELATION_COUNTDOWN = 10U;//5U;
+
 const uint8_t MAX_SYNC_BIT_START_ERRS = 2U;
 const uint8_t MAX_SYNC_BIT_RUN_ERRS   = 4U;
 
@@ -60,7 +63,8 @@ m_threshold(),
 m_thresholdVal(0),
 m_averagePtr(NOAVEPTR),
 m_rssiAccum(0U),
-m_rssiCount(0U)
+m_rssiCount(0U),
+m_duid(0U)
 {
 }
 
@@ -84,6 +88,7 @@ void CP25RX::reset()
   m_countdown     = 0U;
   m_rssiAccum     = 0U;
   m_rssiCount     = 0U;
+  m_duid          = 0U;
 }
 
 void CP25RX::samples(const q15_t* samples, uint16_t* rssi, uint8_t length)
@@ -113,8 +118,10 @@ void CP25RX::samples(const q15_t* samples, uint16_t* rssi, uint8_t length)
     }
 
     m_dataPtr++;
-    if (m_dataPtr >= P25_LDU_FRAME_LENGTH_SAMPLES)
+    if (m_dataPtr >= P25_LDU_FRAME_LENGTH_SAMPLES) {
       m_dataPtr = 0U;
+      m_duid = 0U;
+    }
 
     m_bitPtr++;
     if (m_bitPtr >= P25_RADIO_SYMBOL_LENGTH)
@@ -136,7 +143,7 @@ void CP25RX::processNone(q15_t sample)
 
       m_averagePtr = NOAVEPTR;
 
-      m_countdown = 5U;
+      m_countdown = CORRELATION_COUNTDOWN;
     }
   }
 
@@ -169,7 +176,18 @@ void CP25RX::processHdr(q15_t sample)
   }
 
   if (m_dataPtr == m_maxSyncPtr) {
-    if (m_hdrSyncPtr != m_lduSyncPtr) {
+    uint16_t nidStartPtr = m_hdrStartPtr + P25_SYNC_LENGTH_SAMPLES;
+    if (nidStartPtr >= P25_LDU_FRAME_LENGTH_SAMPLES)
+        nidStartPtr -= P25_LDU_FRAME_LENGTH_SAMPLES;
+
+    uint8_t nid[2U];
+    samplesToBits(nidStartPtr, (2U * 4U), nid, 0U, m_centreVal, m_thresholdVal);
+    // DEBUG3("P25RX: nid (b0 - b1)", nid[0U], nid[1U]);
+
+    m_duid = nid[1U] & 0x0F;
+
+    switch (m_duid) {
+        case P25_DUID_HDU: {
                 calculateLevels(m_hdrStartPtr, P25_HDR_FRAME_LENGTH_SYMBOLS);
 
                 DEBUG4("P25RX: sync found in Hdr pos/centre/threshold", m_hdrSyncPtr, m_centreVal, m_thresholdVal);
@@ -180,6 +198,58 @@ void CP25RX::processHdr(q15_t sample)
                 frame[0U] = 0x01U;
                 serial.writeP25Hdr(frame, P25_HDR_FRAME_LENGTH_BYTES + 1U);
             }
+            break;
+		case P25_DUID_PDU: {
+				calculateLevels(m_hdrSyncPtr, P25_PDU_HDR_FRAME_LENGTH_SYMBOLS);
+
+				DEBUG4("P25RX: sync found in PDU pos/centre/threshold", m_hdrSyncPtr, m_centreVal, m_thresholdVal);
+
+				uint8_t frame[P25_PDU_HDR_FRAME_LENGTH_BYTES + 1U];
+				samplesToBits(m_hdrSyncPtr, P25_PDU_HDR_FRAME_LENGTH_SYMBOLS, frame, 8U, m_centreVal, m_thresholdVal);
+
+				frame[0U] = 0x01U;
+				serial.writeP25Hdr(frame, P25_PDU_HDR_FRAME_LENGTH_BYTES + 1U);
+			}
+			break;
+		case P25_DUID_TSDU: {
+                calculateLevels(m_hdrStartPtr, P25_TSDU_FRAME_LENGTH_SYMBOLS);
+
+                DEBUG4("P25RX: sync found in TSDU pos/centre/threshold", m_hdrSyncPtr, m_centreVal, m_thresholdVal);
+
+                uint8_t frame[P25_TSDU_FRAME_LENGTH_BYTES + 1U];
+                samplesToBits(m_hdrStartPtr, P25_TSDU_FRAME_LENGTH_SYMBOLS, frame, 8U, m_centreVal, m_thresholdVal);
+
+                frame[0U] = 0x01U;
+                serial.writeP25Hdr(frame, P25_TSDU_FRAME_LENGTH_BYTES + 1U);
+            }
+            break;
+        case P25_DUID_TDU: {
+                calculateLevels(m_hdrStartPtr, P25_TERM_FRAME_LENGTH_SYMBOLS);
+
+                DEBUG4("P25RX: sync found in TDU pos/centre/threshold", m_hdrSyncPtr, m_centreVal, m_thresholdVal);
+
+                uint8_t frame[P25_TERM_FRAME_LENGTH_BYTES + 1U];
+                samplesToBits(m_hdrStartPtr, P25_TERM_FRAME_LENGTH_SYMBOLS, frame, 8U, m_centreVal, m_thresholdVal);
+
+                frame[0U] = 0x01U;
+                serial.writeP25Hdr(frame, P25_TERM_FRAME_LENGTH_BYTES + 1U);
+            }
+            break;
+        case P25_DUID_TDULC: {
+                calculateLevels(m_hdrStartPtr, P25_TERMLC_FRAME_LENGTH_SYMBOLS);
+
+                DEBUG4("P25RX: sync found in TDULC pos/centre/threshold", m_hdrSyncPtr, m_centreVal, m_thresholdVal);
+
+                uint8_t frame[P25_TERMLC_FRAME_LENGTH_BYTES + 1U];
+                samplesToBits(m_hdrStartPtr, P25_TERMLC_FRAME_LENGTH_SYMBOLS, frame, 8U, m_centreVal, m_thresholdVal);
+
+                frame[0U] = 0x01U;
+                serial.writeP25Hdr(frame, P25_TERMLC_FRAME_LENGTH_BYTES + 1U);
+            }
+            break;
+        default:
+            break;
+    }
 
     m_minSyncPtr = m_lduSyncPtr + P25_LDU_FRAME_LENGTH_SAMPLES - 1U;
     if (m_minSyncPtr >= P25_LDU_FRAME_LENGTH_SAMPLES)
@@ -238,6 +308,7 @@ void CP25RX::processLdu(q15_t sample)
       m_averagePtr = NOAVEPTR;
       m_countdown  = 0U;
       m_maxCorr    = 0;
+      m_duid       = 0U;
 		} else {
       frame[0U] = m_lostCount == (MAX_SYNC_FRAMES - 1U) ? 0x01U : 0x00U;
       writeRSSILdu(frame);

P25RX.h

@@ -1,5 +1,6 @@
 /*
  *   Copyright (C) 2015,2016,2017 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2018 by Bryan Biedenkapp <[email protected]>
  *
  *   This program is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by
@@ -59,6 +60,7 @@ private:
   uint8_t     m_averagePtr;
   uint32_t    m_rssiAccum;
   uint16_t    m_rssiCount;
+  uint8_t     m_duid;
 
   void processNone(q15_t sample);
   void processHdr(q15_t sample);

P25TX.cpp

@@ -43,7 +43,7 @@ const q15_t P25_LEVELD = -1260;
 const uint8_t P25_START_SYNC = 0x77U;
 
 CP25TX::CP25TX() :
-m_buffer(1500U),
+m_buffer(TX_BUFFER_LEN),
 m_modFilter(),
 m_lpFilter(),
 m_modState(),

POCSAGTX.cpp

@@ -0,0 +1,149 @@
+/*
+ *   Copyright (C) 2009-2018 by Jonathan Naylor G4KLX
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "Config.h"
+#include "Globals.h"
+#include "POCSAGTX.h"
+
+const uint16_t POCSAG_FRAME_LENGTH_BYTES = 17U * sizeof(uint32_t);
+
+const uint16_t POCSAG_PREAMBLE_LENGTH_BYTES = 18U * sizeof(uint32_t);
+
+const uint16_t POCSAG_RADIO_SYMBOL_LENGTH = 20U;
+
+const q15_t POCSAG_LEVEL1[] = { 1700,  1700,  1700,  1700,  1700,  1700,  1700,  1700,  1700,  1700,  1700,  1700,  1700,  1700,  1700,  1700,  1700,  1700,  1700,  1700};
+const q15_t POCSAG_LEVEL0[] = {-1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700, -1700};
+
+static q15_t SHAPING_FILTER[] = {5461, 5461, 5461, 5461, 5461, 5461};
+const uint16_t SHAPING_FILTER_LEN = 6U;
+
+const uint8_t POCSAG_SYNC = 0xAAU;
+
+CPOCSAGTX::CPOCSAGTX() :
+m_buffer(4000U),
+m_modFilter(),
+m_modState(),
+m_poBuffer(),
+m_poLen(0U),
+m_poPtr(0U),
+m_txDelay(POCSAG_PREAMBLE_LENGTH_BYTES)
+{
+  ::memset(m_modState, 0x00U, 170U * sizeof(q15_t));
+
+  m_modFilter.numTaps = SHAPING_FILTER_LEN;
+  m_modFilter.pState  = m_modState;
+  m_modFilter.pCoeffs = SHAPING_FILTER;
+}
+
+void CPOCSAGTX::process()
+{
+  if (m_buffer.getData() == 0U && m_poLen == 0U)
+    return;
+
+  if (m_poLen == 0U) {
+    if (!m_tx) {
+      for (uint16_t i = 0U; i < m_txDelay; i++)
+        m_poBuffer[m_poLen++] = POCSAG_SYNC;
+    } else {
+      for (uint8_t i = 0U; i < POCSAG_FRAME_LENGTH_BYTES; i++) {
+        uint8_t c = m_buffer.get();
+        m_poBuffer[m_poLen++] = c;
+      }
+    }
+
+    m_poPtr = 0U;
+  }
+
+  if (m_poLen > 0U) {
+    uint16_t space = io.getSpace();
+    
+    while (space > (8U * POCSAG_RADIO_SYMBOL_LENGTH)) {
+      uint8_t c = m_poBuffer[m_poPtr++];
+      writeByte(c);
+
+      space -= 8U * POCSAG_RADIO_SYMBOL_LENGTH;
+      
+      if (m_poPtr >= m_poLen) {
+        m_poPtr = 0U;
+        m_poLen = 0U;
+        return;
+      }
+    }
+  }
+}
+
+bool CPOCSAGTX::busy()
+{
+  if (m_poLen > 0U || m_buffer.getData() > 0U)
+    return true;
+  else
+    return false;
+}
+
+uint8_t CPOCSAGTX::writeData(const uint8_t* data, uint8_t length)
+{
+  if (length != POCSAG_FRAME_LENGTH_BYTES)
+    return 4U;
+
+  uint16_t space = m_buffer.getSpace();
+  if (space < POCSAG_FRAME_LENGTH_BYTES)
+    return 5U;
+
+  for (uint8_t i = 0U; i < POCSAG_FRAME_LENGTH_BYTES; i++)
+    m_buffer.put(data[i]);
+
+  return 0U;
+}
+
+void CPOCSAGTX::writeByte(uint8_t c)
+{
+  q15_t inBuffer[POCSAG_RADIO_SYMBOL_LENGTH * 8U];
+  q15_t outBuffer[POCSAG_RADIO_SYMBOL_LENGTH * 8U];
+
+  const uint8_t MASK = 0x80U;
+
+  uint8_t n = 0U;
+  for (uint8_t i = 0U; i < 8U; i++, c <<= 1, n += POCSAG_RADIO_SYMBOL_LENGTH) {
+    switch (c & MASK) {
+      case 0x80U:
+        ::memcpy(inBuffer + n, POCSAG_LEVEL1, POCSAG_RADIO_SYMBOL_LENGTH * sizeof(q15_t));
+        break;
+      default:
+        ::memcpy(inBuffer + n, POCSAG_LEVEL0, POCSAG_RADIO_SYMBOL_LENGTH * sizeof(q15_t));
+        break;
+    }
+  }
+
+  ::arm_fir_fast_q15(&m_modFilter, inBuffer, outBuffer, POCSAG_RADIO_SYMBOL_LENGTH * 8U);
+
+  io.write(STATE_POCSAG, outBuffer, POCSAG_RADIO_SYMBOL_LENGTH * 8U);
+}
+
+void CPOCSAGTX::setTXDelay(uint8_t delay)
+{
+  m_txDelay = POCSAG_PREAMBLE_LENGTH_BYTES + (delay * 3U) / 2U;
+
+  if (m_txDelay > 150U)
+    m_txDelay = 150U;
+}
+
+uint8_t CPOCSAGTX::getSpace() const
+{
+  return m_buffer.getSpace() / POCSAG_FRAME_LENGTH_BYTES;
+}
+

POCSAGTX.h

@@ -0,0 +1,53 @@
+/*
+ *   Copyright (C) 2015-2019 by Jonathan Naylor G4KLX
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if !defined(POCSAGTX_H)
+#define  POCSAGTX_H
+
+#include "Config.h"
+
+#include "SerialRB.h"
+
+class CPOCSAGTX {
+public:
+  CPOCSAGTX();
+
+  uint8_t writeData(const uint8_t* data, uint8_t length);
+
+  void writeByte(uint8_t c);
+
+  void process();
+
+  void setTXDelay(uint8_t delay);
+
+  uint8_t getSpace() const;
+
+  bool busy();
+
+private:
+  CSerialRB            m_buffer;
+  arm_fir_instance_q15 m_modFilter;
+  q15_t                m_modState[170U];     // NoTaps + BlockSize - 1, 6 + 160 - 1 plus some spare
+  uint8_t              m_poBuffer[200U];
+  uint16_t             m_poLen;
+  uint16_t             m_poPtr;
+  uint16_t             m_txDelay;
+};
+
+#endif
+

README.md

@@ -1,7 +1,7 @@
-This is the source code of the MMDVM firmware that supports D-Star, DMR, System Fusion and P25 modes.
+This is the source code of the MMDVM firmware that supports D-Star, DMR, System Fusion, P25, NXDN, and POCSAG modes.
 
-It runs on the Arduino Due, the ST-Micro STM32F407-DISCO and STM32F446-NUCLEO, as well as the Teensy 3.1/3.2/3.5/3.6. What these platforms have in common is the use of an ARM Cortex-M3 or M4 processor with a clock speed greater than 70 MHz, and access to at least one analogue to digital converter and one digital to analogue converter. A Cortex-M7 processor is also probably adequate.
+It runs on the Arduino Due, the ST-Micro STM32F1xxx, STM32F4xxx and STM32F7xxx processors, as well as the Teensy 3.1/3.2/3.5/3.6. What these platforms have in common is the use of an ARM Cortex-M3 or M4 processor with a clock speed greater than 70 MHz, and access to at least one analogue to digital converter and one digital to analogue converter.
 
-In order to build this software for the Arduino Due, you will need to edit a file within the Arduino GUI and that is detailed in the BUILD.txt file. The STM32 support is being supplied via the Coocox IDE with ARM GCC. The Teensy support is via the latest beta of Teensyduino.
+In order to build this software for the Arduino Due, you will need to edit a file within the Arduino GUI and that is detailed in the BUILD.txt file. The STM32 support is being supplied via the Coocox IDE with ARM GCC. The Teensy support uses Teensyduino.
 
 This software is licenced under the GPL v2 and is intended for amateur and educational use only. Use of this software for commercial purposes is strictly forbidden.

RSSIRB.cpp

@@ -22,7 +22,6 @@ Boston, MA  02110-1301, USA.
 
 CRSSIRB::CRSSIRB(uint16_t length) :
 m_length(length),
-m_rssi(NULL),
 m_head(0U),
 m_tail(0U),
 m_full(false),
@@ -101,4 +100,3 @@ bool CRSSIRB::hasOverflowed()
 
   return overflow;
 }
-

SampleRB.cpp

@@ -22,8 +22,6 @@ Boston, MA  02110-1301, USA.
 
 CSampleRB::CSampleRB(uint16_t length) :
 m_length(length),
-m_samples(NULL),
-m_control(NULL),
 m_head(0U),
 m_tail(0U),
 m_full(false),

SerialArduino.cpp

@@ -21,7 +21,10 @@
 
 #include "SerialPort.h"
 
-#if defined(__SAM3X8E__) || defined(__MK20DX256__) || defined(__MK64FX512__) || defined(__MK66FX1M0__)
+#if defined(VK6MST_TEENSY_PI3_SHIELD_I2C)
+//it will load I2CTeensy.cpp
+
+#elif defined(__SAM3X8E__) || defined(__MK20DX256__) || defined(__MK64FX512__) || defined(__MK66FX1M0__)
 
 void CSerialPort::beginInt(uint8_t n, int speed)
 {

SerialPort.cpp

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2013,2015,2016,2017,2018 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2013,2015-2020 by Jonathan Naylor G4KLX
  *   Copyright (C) 2016 by Colin Durbridge G4EML
  *
  *   This program is free software; you can redistribute it and/or modify
@@ -63,30 +63,52 @@ const uint8_t MMDVM_P25_LOST     = 0x32U;
 const uint8_t MMDVM_NXDN_DATA    = 0x40U;
 const uint8_t MMDVM_NXDN_LOST    = 0x41U;
 
+const uint8_t MMDVM_POCSAG_DATA  = 0x50U;
+
+const uint8_t MMDVM_FM_PARAMS1   = 0x60U;
+const uint8_t MMDVM_FM_PARAMS2   = 0x61U;
+const uint8_t MMDVM_FM_PARAMS3   = 0x62U;
+
 const uint8_t MMDVM_ACK          = 0x70U;
 const uint8_t MMDVM_NAK          = 0x7FU;
 
 const uint8_t MMDVM_SERIAL       = 0x80U;
 
+const uint8_t MMDVM_TRANSPARENT  = 0x90U;
+const uint8_t MMDVM_QSO_INFO     = 0x91U;
+
 const uint8_t MMDVM_DEBUG1       = 0xF1U;
 const uint8_t MMDVM_DEBUG2       = 0xF2U;
 const uint8_t MMDVM_DEBUG3       = 0xF3U;
 const uint8_t MMDVM_DEBUG4       = 0xF4U;
 const uint8_t MMDVM_DEBUG5       = 0xF5U;
 
-
+#if EXTERNAL_OSC == 12000000
-#if defined(EXTERNAL_OSC)
+#define TCXO "12.0000 MHz"
-#define DESCRIPTION              "MMDVM 20170501 TCXO (D-Star/DMR/System Fusion/P25/NXDN/RSSI/CW Id)"
+#elif EXTERNAL_OSC == 12288000
+#define TCXO "12.2880 MHz"
+#elif EXTERNAL_OSC == 14400000
+#define TCXO "14.4000 MHz"
+#elif EXTERNAL_OSC == 19200000
+#define TCXO "19.2000 Mhz"
 #else
-#define DESCRIPTION              "MMDVM 20170501 (D-Star/DMR/System Fusion/P25/NXDN/RSSI/CW Id)"
+#define TCXO "NO TCXO"
 #endif
 
-#if defined(GITVERSION)
+#if defined(STM32F4_RPT_HAT_TGO)
-#define concat(a, b) a " GitID #" b ""
+#define	HW_TYPE	"MMDVM RPT_HAT_TGO"
-const char HARDWARE[] = concat(DESCRIPTION, GITVERSION);
 #else
-#define concat(a, b, c) a " (Build: " b " " c ")"
+#define	HW_TYPE	"MMDVM"
-const char HARDWARE[] = concat(DESCRIPTION, __TIME__, __DATE__);
+#endif
+
+#define DESCRIPTION "20200425 (D-Star/DMR/System Fusion/P25/NXDN/POCSAG/FM)"
+
+#if defined(GITVERSION)
+#define concat(h, a, b, c) h " " a " " b " GitID #" c ""
+const char HARDWARE[] = concat(HW_TYPE, DESCRIPTION, TCXO, GITVERSION);
+#else
+#define concat(h, a, b, c, d) h " " a " " b " (Build: " c " " d ")"
+const char HARDWARE[] = concat(HW_TYPE, DESCRIPTION, TCXO, __TIME__, __DATE__);
 #endif
 
 const uint8_t PROTOCOL_VERSION   = 1U;
@@ -130,11 +152,11 @@ void CSerialPort::getStatus()
 {
   io.resetWatchdog();
 
-  uint8_t reply[15U];
+  uint8_t reply[20U];
 
   // Send all sorts of interesting internal values
   reply[0U]  = MMDVM_FRAME_START;
-  reply[1U]  = 11U;
+  reply[1U]  = 13U;
   reply[2U]  = MMDVM_GET_STATUS;
 
   reply[3U]  = 0x00U;
@@ -148,6 +170,10 @@ void CSerialPort::getStatus()
     reply[3U] |= 0x08U;
   if (m_nxdnEnable)
     reply[3U] |= 0x10U;
+  if (m_pocsagEnable)
+    reply[3U] |= 0x20U;
+  if (m_fmEnable)
+    reply[3U] |= 0x40U;
 
   reply[4U]  = uint8_t(m_modemState);
 
@@ -207,12 +233,17 @@ void CSerialPort::getStatus()
   else
     reply[11U] = 0U;
 
-  writeInt(1U, reply, 12);
+  if (m_pocsagEnable)
+    reply[12U] = pocsagTX.getSpace();
+  else
+    reply[12U] = 0U;
+
+  writeInt(1U, reply, 13);
 }
 
 void CSerialPort::getVersion()
 {
-  uint8_t reply[100U];
+  uint8_t reply[150U];
 
   reply[0U] = MMDVM_FRAME_START;
   reply[1U] = 0U;
@@ -231,7 +262,7 @@ void CSerialPort::getVersion()
 
 uint8_t CSerialPort::setConfig(const uint8_t* data, uint8_t length)
 {
-  if (length < 16U)
+  if (length < 19U)
     return 4U;
 
   bool rxInvert  = (data[0U] & 0x01U) == 0x01U;
@@ -247,6 +278,8 @@ uint8_t CSerialPort::setConfig(const uint8_t* data, uint8_t length)
   bool ysfEnable    = (data[1U] & 0x04U) == 0x04U;
   bool p25Enable    = (data[1U] & 0x08U) == 0x08U;
   bool nxdnEnable   = (data[1U] & 0x10U) == 0x10U;
+  bool pocsagEnable = (data[1U] & 0x20U) == 0x20U;
+  bool fmEnable     = (data[1U] & 0x40U) == 0x40U;
 
   uint8_t txDelay = data[2U];
   if (txDelay > 50U)
@@ -254,7 +287,7 @@ uint8_t CSerialPort::setConfig(const uint8_t* data, uint8_t length)
 
   MMDVM_STATE modemState = MMDVM_STATE(data[3U]);
 
-  if (modemState != STATE_IDLE && modemState != STATE_DSTAR && modemState != STATE_DMR && modemState != STATE_YSF && modemState != STATE_P25 && modemState != STATE_NXDN && modemState != STATE_DSTARCAL && modemState != STATE_DMRCAL && modemState != STATE_RSSICAL && modemState != STATE_LFCAL && modemState != STATE_DMRCAL1K && modemState != STATE_P25CAL1K && modemState != STATE_DMRDMO1K && modemState != STATE_NXDNCAL1K)
+  if (modemState != STATE_IDLE && modemState != STATE_DSTAR && modemState != STATE_DMR && modemState != STATE_YSF && modemState != STATE_P25 && modemState != STATE_NXDN && modemState != STATE_POCSAG && modemState != STATE_FM && modemState != STATE_DSTARCAL && modemState != STATE_DMRCAL && modemState != STATE_RSSICAL && modemState != STATE_LFCAL && modemState != STATE_DMRCAL1K && modemState != STATE_P25CAL1K && modemState != STATE_DMRDMO1K && modemState != STATE_NXDNCAL1K && modemState != STATE_POCSAGCAL)
     return 4U;
   if (modemState == STATE_DSTAR && !dstarEnable)
     return 4U;
@@ -266,6 +299,10 @@ uint8_t CSerialPort::setConfig(const uint8_t* data, uint8_t length)
     return 4U;
   if (modemState == STATE_NXDN && !nxdnEnable)
     return 4U;
+  if (modemState == STATE_POCSAG && !pocsagEnable)
+    return 4U;
+  if (modemState == STATE_FM && !fmEnable)
+    return 4U;
 
   uint8_t rxLevel = data[4U];
 
@@ -286,6 +323,12 @@ uint8_t CSerialPort::setConfig(const uint8_t* data, uint8_t length)
 
   uint8_t nxdnTXLevel   = data[15U];
 
+  uint8_t ysfTXHang     = data[16U];
+
+  uint8_t pocsagTXLevel = data[17U];
+
+  uint8_t fmTXLevel     = data[18U];
+
   m_modemState  = modemState;
 
   m_dstarEnable  = dstarEnable;
@@ -293,6 +336,8 @@ uint8_t CSerialPort::setConfig(const uint8_t* data, uint8_t length)
   m_ysfEnable    = ysfEnable;
   m_p25Enable    = p25Enable;
   m_nxdnEnable   = nxdnEnable;
+  m_pocsagEnable = pocsagEnable;
+  m_fmEnable     = fmEnable;
   m_duplex       = !simplex;
 
   dstarTX.setTXDelay(txDelay);
@@ -300,6 +345,7 @@ uint8_t CSerialPort::setConfig(const uint8_t* data, uint8_t length)
   p25TX.setTXDelay(txDelay);
   dmrDMOTX.setTXDelay(txDelay);
   nxdnTX.setTXDelay(txDelay);
+  pocsagTX.setTXDelay(txDelay);
 
   dmrTX.setColorCode(colorCode);
   dmrRX.setColorCode(colorCode);
@@ -307,15 +353,82 @@ uint8_t CSerialPort::setConfig(const uint8_t* data, uint8_t length)
   dmrDMORX.setColorCode(colorCode);
   dmrIdleRX.setColorCode(colorCode);
 
-  ysfTX.setLoDev(ysfLoDev);
+  ysfTX.setParams(ysfLoDev, ysfTXHang);
 
-  io.setParameters(rxInvert, txInvert, pttInvert, rxLevel, cwIdTXLevel, dstarTXLevel, dmrTXLevel, ysfTXLevel, p25TXLevel, nxdnTXLevel, txDCOffset, rxDCOffset);
+  io.setParameters(rxInvert, txInvert, pttInvert, rxLevel, cwIdTXLevel, dstarTXLevel, dmrTXLevel, ysfTXLevel, p25TXLevel, nxdnTXLevel, pocsagTXLevel, fmTXLevel, txDCOffset, rxDCOffset);
 
   io.start();
 
   return 0U;
 }
 
+uint8_t CSerialPort::setFMParams1(const uint8_t* data, uint8_t length)
+{
+  if (length < 8U)
+    return 4U;
+
+  uint8_t  speed     = data[0U];;
+  uint16_t frequency = data[1U] * 10U;
+  uint8_t  time      = data[2U];
+  uint8_t  holdoff   = data[3U];
+  uint8_t  highLevel = data[4U];
+  uint8_t  lowLevel  = data[5U];
+
+  bool callAtStart = (data[6U] & 0x01U) == 0x01U;
+  bool callAtEnd   = (data[6U] & 0x02U) == 0x02U;
+
+  char callsign[50U];
+  uint8_t n = 0U;
+  for (uint8_t i = 7U; i < length; i++, n++)
+    callsign[n] = data[i];
+  callsign[n] = '\0';
+
+  return fm.setCallsign(callsign, speed, frequency, time, holdoff, highLevel, lowLevel, callAtStart, callAtEnd);
+}
+
+uint8_t CSerialPort::setFMParams2(const uint8_t* data, uint8_t length)
+{
+  if (length < 6U)
+    return 4U;
+
+  uint8_t  speed     = data[0U];
+  uint16_t frequency = data[1U] * 10U;
+  uint8_t  minTime   = data[2U];
+  uint16_t delay     = data[3U] * 10U;
+  uint8_t  level     = data[4U];
+
+  char ack[50U];
+  uint8_t n = 0U;
+  for (uint8_t i = 5U; i < length; i++, n++)
+    ack[n] = data[i];
+  ack[n] = '\0';
+
+  return fm.setAck(ack, speed, frequency, minTime, delay, level);
+}
+
+uint8_t CSerialPort::setFMParams3(const uint8_t* data, uint8_t length)
+{
+  if (length < 10U)
+    return 4U;
+
+  uint16_t timeout        = data[0U] * 5U;
+  uint8_t  timeoutLevel   = data[1U];
+
+  uint8_t  ctcssFrequency = data[2U];
+  uint8_t  ctcssThreshold = data[3U];
+  uint8_t  ctcssLevel     = data[4U];
+
+  uint8_t  kerchunkTime   = data[5U];
+  uint8_t  hangTime       = data[6U];
+
+  bool     useCOS         = (data[7U] & 0x01U) == 0x01U;
+
+  uint8_t  rxBoost        = data[8U];
+  uint8_t  maxDev         = data[9U];
+
+  return fm.setMisc(timeout, timeoutLevel, ctcssFrequency, ctcssThreshold, ctcssLevel, kerchunkTime, hangTime, useCOS, rxBoost, maxDev);
+}
+
 uint8_t CSerialPort::setMode(const uint8_t* data, uint8_t length)
 {
   if (length < 1U)
@@ -326,7 +439,7 @@ uint8_t CSerialPort::setMode(const uint8_t* data, uint8_t length)
   if (modemState == m_modemState)
     return 0U;
 
-  if (modemState != STATE_IDLE && modemState != STATE_DSTAR && modemState != STATE_DMR && modemState != STATE_YSF && modemState != STATE_P25 && modemState != STATE_NXDN && modemState != STATE_DSTARCAL && modemState != STATE_DMRCAL && modemState != STATE_RSSICAL && modemState != STATE_LFCAL && modemState != STATE_DMRCAL1K && modemState != STATE_P25CAL1K && modemState != STATE_DMRDMO1K && modemState != STATE_NXDNCAL1K)
+  if (modemState != STATE_IDLE && modemState != STATE_DSTAR && modemState != STATE_DMR && modemState != STATE_YSF && modemState != STATE_P25 && modemState != STATE_NXDN && modemState != STATE_POCSAG && modemState != STATE_FM && modemState != STATE_DSTARCAL && modemState != STATE_DMRCAL && modemState != STATE_RSSICAL && modemState != STATE_LFCAL && modemState != STATE_DMRCAL1K && modemState != STATE_P25CAL1K && modemState != STATE_DMRDMO1K && modemState != STATE_NXDNCAL1K && modemState != STATE_POCSAGCAL)
     return 4U;
   if (modemState == STATE_DSTAR && !m_dstarEnable)
     return 4U;
@@ -338,6 +451,10 @@ uint8_t CSerialPort::setMode(const uint8_t* data, uint8_t length)
     return 4U;
   if (modemState == STATE_NXDN && !m_nxdnEnable)
     return 4U;
+  if (modemState == STATE_POCSAG && !m_pocsagEnable)
+    return 4U;
+  if (modemState == STATE_FM && !m_fmEnable)
+    return 4U;
 
   setMode(modemState);
 
@@ -349,146 +466,80 @@ void CSerialPort::setMode(MMDVM_STATE modemState)
   switch (modemState) {
     case STATE_DMR:
       DEBUG1("Mode set to DMR");
-      dstarRX.reset();
-      ysfRX.reset();
-      p25RX.reset();
-      nxdnRX.reset();
-      cwIdTX.reset();
       break;
     case STATE_DSTAR:
       DEBUG1("Mode set to D-Star");
-      dmrIdleRX.reset();
-      dmrDMORX.reset();
-      dmrRX.reset();
-      ysfRX.reset();
-      p25RX.reset();
-      nxdnRX.reset();
-      cwIdTX.reset();
       break;
     case STATE_YSF:
       DEBUG1("Mode set to System Fusion");
-      dmrIdleRX.reset();
-      dmrDMORX.reset();
-      dmrRX.reset();
-      dstarRX.reset();
-      p25RX.reset();
-      nxdnRX.reset();
-      cwIdTX.reset();
       break;
     case STATE_P25:
       DEBUG1("Mode set to P25");
-      dmrIdleRX.reset();
-      dmrDMORX.reset();
-      dmrRX.reset();
-      dstarRX.reset();
-      ysfRX.reset();
-      nxdnRX.reset();
-      cwIdTX.reset();
       break;
     case STATE_NXDN:
       DEBUG1("Mode set to NXDN");
-      dmrIdleRX.reset();
+      break;
-      dmrDMORX.reset();
+    case STATE_POCSAG:
-      dmrRX.reset();
+      DEBUG1("Mode set to POCSAG");
-      dstarRX.reset();
+      break;
-      ysfRX.reset();
+    case STATE_FM:
-      p25RX.reset();
+      DEBUG1("Mode set to FM");
-      cwIdTX.reset();
       break;
     case STATE_DSTARCAL:
       DEBUG1("Mode set to D-Star Calibrate");
-      dmrIdleRX.reset();
-      dmrDMORX.reset();
-      dmrRX.reset();
-      dstarRX.reset();
-      ysfRX.reset();
-      p25RX.reset();
-      nxdnRX.reset();
-      cwIdTX.reset();
       break;
     case STATE_DMRCAL:
       DEBUG1("Mode set to DMR Calibrate");
-      dmrIdleRX.reset();
-      dmrDMORX.reset();
-      dmrRX.reset();
-      dstarRX.reset();
-      ysfRX.reset();
-      p25RX.reset();
-      nxdnRX.reset();
-      cwIdTX.reset();
       break;
     case STATE_RSSICAL:
       DEBUG1("Mode set to RSSI Calibrate");
-      dmrIdleRX.reset();
-      dmrDMORX.reset();
-      dmrRX.reset();
-      dstarRX.reset();
-      ysfRX.reset();
-      p25RX.reset();
-      nxdnRX.reset();
-      cwIdTX.reset();
       break;
     case STATE_LFCAL:
       DEBUG1("Mode set to 80 Hz Calibrate");
-      dmrIdleRX.reset();
-      dmrDMORX.reset();
-      dmrRX.reset();
-      dstarRX.reset();
-      ysfRX.reset();
-      p25RX.reset();
-      nxdnRX.reset();
-      cwIdTX.reset();
       break;
     case STATE_DMRCAL1K:
       DEBUG1("Mode set to DMR BS 1031 Hz Calibrate");
-      dmrIdleRX.reset();
-      dmrDMORX.reset();
-      dmrRX.reset();
-      dstarRX.reset();
-      ysfRX.reset();
-      p25RX.reset();
-      nxdnRX.reset();
-      cwIdTX.reset();
       break;
     case STATE_P25CAL1K:
       DEBUG1("Mode set to P25 1011 Hz Calibrate");
-      dmrIdleRX.reset();
-      dmrDMORX.reset();
-      dmrRX.reset();
-      dstarRX.reset();
-      ysfRX.reset();
-      p25RX.reset();
-      nxdnRX.reset();
-      cwIdTX.reset();
       break;
     case STATE_DMRDMO1K:
       DEBUG1("Mode set to DMR MS 1031 Hz Calibrate");
-      dmrIdleRX.reset();
-      dmrDMORX.reset();
-      dmrRX.reset();
-      dstarRX.reset();
-      ysfRX.reset();
-      p25RX.reset();
-      nxdnRX.reset();
-      cwIdTX.reset();
       break;
     case STATE_NXDNCAL1K:
       DEBUG1("Mode set to NXDN 1031 Hz Calibrate");
+      break;
+    case STATE_POCSAGCAL:
+      DEBUG1("Mode set to POCSAG Calibrate");
+      break;
+    default:        // STATE_IDLE
+      DEBUG1("Mode set to Idle");
+      break;
+  }
+
+  if (modemState != STATE_DSTAR)
+    dstarRX.reset();
+
+  if (modemState != STATE_DMR) {
     dmrIdleRX.reset();
     dmrDMORX.reset();
     dmrRX.reset();
-      dstarRX.reset();
-      ysfRX.reset();
-      p25RX.reset();
-      nxdnRX.reset();
-      cwIdTX.reset();
-      break;
-    default:
-      DEBUG1("Mode set to Idle");
-      // STATE_IDLE
-      break;
   }
 
+  if (modemState != STATE_YSF)
+    ysfRX.reset();
+
+  if (modemState != STATE_P25)
+    p25RX.reset();
+
+  if (modemState != STATE_NXDN)
+    nxdnRX.reset();
+
+  if (modemState != STATE_FM)
+    fm.reset();
+
+  cwIdTX.reset();
+
   m_modemState = modemState;
 
   io.setMode();
@@ -561,6 +612,36 @@ void CSerialPort::process()
             sendACK();
             break;
 
+          case MMDVM_FM_PARAMS1:
+            err = setFMParams1(m_buffer + 3U, m_len - 3U);
+            if (err == 0U) {
+              sendACK();
+            } else {
+              DEBUG2("Received invalid FM params 1", err);
+              sendNAK(err);
+            }
+            break;
+
+          case MMDVM_FM_PARAMS2:
+            err = setFMParams2(m_buffer + 3U, m_len - 3U);
+            if (err == 0U) {
+              sendACK();
+            } else {
+              DEBUG2("Received invalid FM params 2", err);
+              sendNAK(err);
+            }
+            break;
+
+          case MMDVM_FM_PARAMS3:
+            err = setFMParams3(m_buffer + 3U, m_len - 3U);
+            if (err == 0U) {
+              sendACK();
+            } else {
+              DEBUG2("Received invalid FM params 3", err);
+              sendNAK(err);
+            }
+            break;
+
           case MMDVM_CAL_DATA:
             if (m_modemState == STATE_DSTARCAL)
               err = calDStarTX.write(m_buffer + 3U, m_len - 3U);
@@ -570,6 +651,8 @@ void CSerialPort::process()
               err = calP25.write(m_buffer + 3U, m_len - 3U);
             if (m_modemState == STATE_NXDNCAL1K)
               err = calNXDN.write(m_buffer + 3U, m_len - 3U);
+            if (m_modemState == STATE_POCSAGCAL)
+              err = calPOCSAG.write(m_buffer + 3U, m_len - 3U);
             if (err == 0U) {
               sendACK();
             } else {
@@ -759,6 +842,25 @@ void CSerialPort::process()
             }
             break;
 
+          case MMDVM_POCSAG_DATA:
+            if (m_pocsagEnable) {
+              if (m_modemState == STATE_IDLE || m_modemState == STATE_POCSAG)
+                err = pocsagTX.writeData(m_buffer + 3U, m_len - 3U);
+            }
+            if (err == 0U) {
+              if (m_modemState == STATE_IDLE)
+                setMode(STATE_POCSAG);
+            } else {
+              DEBUG2("Received invalid POCSAG data", err);
+              sendNAK(err);
+            }
+            break;
+
+          case MMDVM_TRANSPARENT:
+          case MMDVM_QSO_INFO:
+            // Do nothing on the MMDVM.
+            break;
+
 #if defined(SERIAL_REPEATER)
           case MMDVM_SERIAL: {
             for (uint8_t i = 3U; i < m_len; i++)

SerialPort.h

@@ -73,6 +73,9 @@ private:
   uint8_t setConfig(const uint8_t* data, uint8_t length);
   uint8_t setMode(const uint8_t* data, uint8_t length);
   void    setMode(MMDVM_STATE modemState);
+  uint8_t setFMParams1(const uint8_t* data, uint8_t length);
+  uint8_t setFMParams2(const uint8_t* data, uint8_t length);
+  uint8_t setFMParams3(const uint8_t* data, uint8_t length);
 
   // Hardware versions
   void    beginInt(uint8_t n, int speed);
@@ -83,4 +86,3 @@ private:
 };
 
 #endif
-

SerialRB.cpp

@@ -22,7 +22,6 @@ Boston, MA  02110-1301, USA.
 
 CSerialRB::CSerialRB(uint16_t length) :
 m_length(length),
-m_buffer(NULL),
 m_head(0U),
 m_tail(0U),
 m_full(false)

SerialSTM.cpp

@@ -1,6 +1,6 @@
 /*
  *   Copyright (C) 2016 by Jim McLaughlin KI6ZUM
- *   Copyright (C) 2016, 2017 by Andy Uribe CA6JAU
+ *   Copyright (C) 2016,2017,2018 by Andy Uribe CA6JAU
  *   Copyright (c) 2017 by Jonathan Naylor G4KLX
  *
  *   This program is free software; you can redistribute it and/or modify
@@ -27,14 +27,14 @@
 Pin definitions:
 
 - Host communication:
-USART1 - TXD PA9  - RXD PA10 (MMDVM-Pi board, MMDVM-Pi F722 board, MMDVM-F4M board)
+USART1 - TXD PA9  - RXD PA10 (MMDVM-Pi board, MMDVM-Pi F722 board, MMDVM-F4M board, STM32F722-F7M board, STM32F4-DVM board)
-USART2 - TXD PA2  - RXD PA3  (Nucleo64 F446RE board, Morpho or Arduino header)
+USART2 - TXD PA2  - RXD PA3  (Nucleo64 F446RE board, Morpho or Arduino header, MMDVM_RPT_Hat BG4TGO/BG5HHP board)
 USART3 - TXD PC10 - RXD PC11 (Discovery board)
 USART3 - TXD PD8  - RXD PD9  (Nucleo144 F767ZI board)
 
 - Serial repeater:
 USART1 - TXD PA9  - RXD PA10 (Nucleo with Arduino header)
-UART5  - TXD PC12 - RXD PD2 (Discovery, MMDVM-Pi, MMDVM-Pi F722 board, MMDVM-F4M board, Nucleo64 with Morpho header and Nucleo144 F767ZI)
+UART5  - TXD PC12 - RXD PD2 (Discovery, MMDVM-Pi, MMDVM-Pi F722 board, MMDVM-F4M board, STM32F722-F7M board, STM32F4-DVM board, Nucleo64 with Morpho header and Nucleo144 F767ZI, MMDVM_RPT_Hat BG4TGO/BG5HHP board)
 */
 
 #if defined(STM32F4XX) || defined(STM32F7XX)
@@ -50,7 +50,7 @@ extern "C" {
 }
 
 /* ************* USART1 ***************** */
-#if defined(STM32F4_PI) || defined(STM32F4_F4M) || defined(STM32F722_PI) || (defined(STM32F4_NUCLEO) && defined(STM32F4_NUCLEO_ARDUINO_HEADER))
+#if defined(STM32F4_PI) || defined(STM32F4_F4M) || defined(STM32F722_F7M) || defined(STM32F722_PI) || defined(STM32F722_RPT_HAT) || defined(STM32F4_DVM) || (defined(STM32F4_NUCLEO) && defined(STM32F4_NUCLEO_ARDUINO_HEADER))
 
 volatile uint8_t  TXSerialfifo1[TX_SERIAL_FIFO_SIZE];
 volatile uint8_t  RXSerialfifo1[RX_SERIAL_FIFO_SIZE];
@@ -241,7 +241,7 @@ void WriteUSART1(const uint8_t* data, uint16_t length)
 #endif
 
 /* ************* USART2 ***************** */
-#if defined(STM32F4_NUCLEO)
+#if defined(STM32F4_NUCLEO) || defined(STM32F4_RPT_HAT_TGO)
 
 volatile uint8_t  TXSerialfifo2[TX_SERIAL_FIFO_SIZE];
 volatile uint8_t  RXSerialfifo2[RX_SERIAL_FIFO_SIZE];
@@ -841,9 +841,9 @@ void CSerialPort::beginInt(uint8_t n, int speed)
       case 1U:
          #if defined(STM32F4_DISCOVERY) || defined(STM32F7_NUCLEO)
          InitUSART3(speed);
-         #elif defined(STM32F4_PI) || defined(STM32F4_F4M) || defined(STM32F722_PI)
+         #elif defined(STM32F4_PI) || defined(STM32F4_F4M) || defined(STM32F722_PI) || defined(STM32F722_F7M) || defined(STM32F722_RPT_HAT) || defined(STM32F4_DVM)
          InitUSART1(speed);
-         #elif defined(STM32F4_NUCLEO)
+         #elif defined(STM32F4_NUCLEO) || defined(STM32F4_RPT_HAT_TGO)
          InitUSART2(speed);
          #endif
          break;
@@ -865,9 +865,9 @@ int CSerialPort::availableInt(uint8_t n)
       case 1U:
          #if defined(STM32F4_DISCOVERY) || defined(STM32F7_NUCLEO)
          return AvailUSART3();
-         #elif defined(STM32F4_PI) || defined(STM32F4_F4M) || defined(STM32F722_PI)
+         #elif defined(STM32F4_PI) || defined(STM32F4_F4M) || defined(STM32F722_PI) || defined(STM32F722_F7M) || defined(STM32F722_RPT_HAT) || defined(STM32F4_DVM)
          return AvailUSART1();
-         #elif defined(STM32F4_NUCLEO)
+         #elif defined(STM32F4_NUCLEO) || defined(STM32F4_RPT_HAT_TGO)
          return AvailUSART2();
          #endif
       case 3U:
@@ -887,9 +887,9 @@ int CSerialPort::availableForWriteInt(uint8_t n)
       case 1U:
          #if defined(STM32F4_DISCOVERY) || defined(STM32F7_NUCLEO)
          return AvailForWriteUSART3();
-         #elif defined(STM32F4_PI) || defined(STM32F4_F4M) || defined(STM32F722_PI)
+         #elif defined(STM32F4_PI) || defined(STM32F4_F4M) || defined(STM32F722_PI) || defined(STM32F722_F7M) || defined(STM32F722_RPT_HAT) || defined(STM32F4_DVM)
          return AvailForWriteUSART1();
-         #elif defined(STM32F4_NUCLEO)
+         #elif defined(STM32F4_NUCLEO) || defined(STM32F4_RPT_HAT_TGO)
          return AvailForWriteUSART2();
          #endif
       case 3U:
@@ -909,9 +909,9 @@ uint8_t CSerialPort::readInt(uint8_t n)
       case 1U:
          #if defined(STM32F4_DISCOVERY) || defined(STM32F7_NUCLEO)
          return ReadUSART3();
-         #elif defined(STM32F4_PI) || defined(STM32F4_F4M) || defined(STM32F722_PI)
+         #elif defined(STM32F4_PI) || defined(STM32F4_F4M) || defined(STM32F722_PI) || defined(STM32F722_F7M) || defined(STM32F722_RPT_HAT) || defined(STM32F4_DVM)
          return ReadUSART1();
-         #elif defined(STM32F4_NUCLEO)
+         #elif defined(STM32F4_NUCLEO) || defined(STM32F4_RPT_HAT_TGO)
          return ReadUSART2();
          #endif
       case 3U:
@@ -933,11 +933,11 @@ void CSerialPort::writeInt(uint8_t n, const uint8_t* data, uint16_t length, bool
          WriteUSART3(data, length);
          if (flush)
             TXSerialFlush3();
-         #elif defined(STM32F4_PI) || defined(STM32F4_F4M) || defined(STM32F722_PI)
+         #elif defined(STM32F4_PI) || defined(STM32F4_F4M) || defined(STM32F722_PI) || defined(STM32F722_F7M) || defined(STM32F722_RPT_HAT) || defined(STM32F4_DVM)
          WriteUSART1(data, length);
          if (flush)
             TXSerialFlush1();
-         #elif defined(STM32F4_NUCLEO)
+         #elif defined(STM32F4_NUCLEO) || defined(STM32F4_RPT_HAT_TGO)
          WriteUSART2(data, length);
          if (flush)
             TXSerialFlush2();

YSFTX.cpp

@@ -1,5 +1,5 @@
 /*
- *   Copyright (C) 2009-2017 by Jonathan Naylor G4KLX
+ *   Copyright (C) 2009-2018 by Jonathan Naylor G4KLX
  *   Copyright (C) 2017 by Andy Uribe CA6JAU
  *
  *   This program is free software; you can redistribute it and/or modify
@@ -41,16 +41,19 @@ const q15_t YSF_LEVELD_LO = -948;
 
 const uint8_t YSF_START_SYNC = 0x77U;
 const uint8_t YSF_END_SYNC   = 0xFFU;
+const uint8_t YSF_HANG       = 0x00U;
 
 CYSFTX::CYSFTX() :
-m_buffer(1500U),
+m_buffer(TX_BUFFER_LEN),
 m_modFilter(),
 m_modState(),
 m_poBuffer(),
 m_poLen(0U),
 m_poPtr(0U),
 m_txDelay(240U),      // 200ms
-m_loDev(false)
+m_loDev(false),
+m_txHang(4800U),      // 4s
+m_txCount(0U)
 {
   ::memset(m_modState, 0x00U, 16U * sizeof(q15_t));
 
@@ -60,12 +63,14 @@ m_loDev(false)
   m_modFilter.pState      = m_modState;
 }
 
+
 void CYSFTX::process()
 {
-  if (m_buffer.getData() == 0U && m_poLen == 0U)
+  if (m_buffer.getData() == 0U && m_poLen == 0U && m_txCount == 0U)
     return;
 
-  if (m_poLen == 0U) {
+  // If we have YSF data to transmit, do so.
+  if (m_poLen == 0U && m_buffer.getData() > 0U) {
     if (!m_tx) {
       for (uint16_t i = 0U; i < m_txDelay; i++)
         m_poBuffer[m_poLen++] = YSF_START_SYNC;
@@ -80,13 +85,17 @@ void CYSFTX::process()
   }
 
   if (m_poLen > 0U) {
+    // Transmit YSF data.
     uint16_t space = io.getSpace();
 
     while (space > (4U * YSF_RADIO_SYMBOL_LENGTH)) {
       uint8_t c = m_poBuffer[m_poPtr++];
       writeByte(c);
 
+      // Reduce space and reset the hang timer.
       space -= 4U * YSF_RADIO_SYMBOL_LENGTH;
+      if (m_duplex)
+        m_txCount = m_txHang;
 
       if (m_poPtr >= m_poLen) {
         m_poPtr = 0U;
@@ -94,6 +103,19 @@ void CYSFTX::process()
         return;
       }
     }
+  } else if (m_txCount > 0U) {
+    // Transmit silence until the hang timer has expired.
+    uint16_t space = io.getSpace();
+
+    while (space > (4U * YSF_RADIO_SYMBOL_LENGTH)) {
+      writeSilence();
+
+      space -= 4U * YSF_RADIO_SYMBOL_LENGTH;
+      m_txCount--;
+
+      if (m_txCount == 0U)
+        return;
+    }
   }
 }
 
@@ -141,6 +163,16 @@ void CYSFTX::writeByte(uint8_t c)
   io.write(STATE_YSF, outBuffer, YSF_RADIO_SYMBOL_LENGTH * 4U);
 }
 
+void CYSFTX::writeSilence()
+{
+  q15_t inBuffer[4U] = {0x00U, 0x00U, 0x00U, 0x00U};
+  q15_t outBuffer[YSF_RADIO_SYMBOL_LENGTH * 4U];
+
+  ::arm_fir_interpolate_q15(&m_modFilter, inBuffer, outBuffer, 4U);
+
+  io.write(STATE_YSF, outBuffer, YSF_RADIO_SYMBOL_LENGTH * 4U);
+}
+
 void CYSFTX::setTXDelay(uint8_t delay)
 {
   m_txDelay = 600U + uint16_t(delay) * 12U;        // 500ms + tx delay
@@ -154,8 +186,9 @@ uint8_t CYSFTX::getSpace() const
   return m_buffer.getSpace() / YSF_FRAME_LENGTH_BYTES;
 }
 
-void CYSFTX::setLoDev(bool on)
+void CYSFTX::setParams(bool on, uint8_t txHang)
 {
   m_loDev  = on;
+  m_txHang = txHang * 1200U;
 }
 

YSFTX.h

@@ -35,7 +35,7 @@ public:
 
   uint8_t getSpace() const;
 
-  void setLoDev(bool on);
+  void setParams(bool on, uint8_t txHang);
 
 private:
   CSerialRB                        m_buffer;
@@ -46,8 +46,11 @@ private:
   uint16_t                         m_poPtr;
   uint16_t                         m_txDelay;
   bool                             m_loDev;
+  uint32_t                         m_txHang;
+  uint32_t                         m_txCount;
 
   void writeByte(uint8_t c);
+  void writeSilence();
 };
 
 #endif

mmdvmmenu.sh

@@ -83,7 +83,7 @@ EOF
     "3")  sed -e 's/\/\/ #define EXTERNAL_OSC 14400000/#define EXTERNAL_OSC 14400000/'     $conf > $conf.tmp && mv -f $conf.tmp $conf && echo "14.400 MHz clock enabled";;
     "4")  sed -e 's/\/\/ #define EXTERNAL_OSC 19200000/#define EXTERNAL_OSC 19200000/'     $conf > $conf.tmp && mv -f $conf.tmp $conf && echo "19.200 MHz clock enabled";;
     "5")  sed -e 's/\/\/ #define USE_COS_AS_LOCKOUT /#define USE_COS_AS_LOCKOUT/'          $conf > $conf.tmp && mv -f $conf.tmp $conf && echo "COS as Lockout enabled";;
-    "6")  sed -e 's/\/\/ #define ARDUINO_MODE_PINS/#define ARDUINO_MODE_PINS/'             $conf > $conf.tmp && mv -f $conf.tmp $conf && echo "Mode pins enabled";;
+    "6")  sed -e 's/\/\/ #define MODE_LEDS/#define MODE_LEDS/'             $conf > $conf.tmp && mv -f $conf.tmp $conf && echo "Mode pins enabled";;
     "7")  sed -e 's/\/\/ #define ARDUINO_DUE_PAPA/#define ARDUINO_DUE_PAPA/'               $conf > $conf.tmp && mv -f $conf.tmp $conf && echo "Layout for the PAPA board enabled";;
     "8")  sed -e 's/\/\/ #define ARDUINO_DUE_ZUM_V10/#define ARDUINO_DUE_ZUM_V10/'         $conf > $conf.tmp && mv -f $conf.tmp $conf && echo "Layout for ZUM V1.0 and V1.0.1 boards enabled";;
     "9")  sed -e 's/\/\/ #define ARDUINO_DUE_NTH/#define ARDUINO_DUE_NTH/'                 $conf > $conf.tmp && mv -f $conf.tmp $conf && echo "Layout for SP8NTH board enabled";;