Add kerchunk TX.

Drcc serial bugfix

FM.cpp

@@ -34,6 +34,7 @@ m_callsignTimer(),
 m_timeoutTimer(),
 m_holdoffTimer(),
 m_kerchunkTimer(),
+m_kerchunkTX(true),
 m_ackMinTimer(),
 m_ackDelayTimer(),
 m_hangTimer(),
@@ -183,7 +184,7 @@ uint8_t CFM::setAck(const char* rfAck, uint8_t speed, uint16_t frequency, uint8_
   return m_rfAck.setParams(rfAck, speed, frequency, level, level);
 }
 
-uint8_t CFM::setMisc(uint16_t timeout, uint8_t timeoutLevel, uint8_t ctcssFrequency, uint8_t ctcssHighThreshold, uint8_t ctcssLowThreshold, uint8_t ctcssLevel, uint8_t kerchunkTime, uint8_t hangTime, bool useCOS, bool cosInvert, uint8_t rfAudioBoost, uint8_t maxDev, uint8_t rxLevel)
+uint8_t CFM::setMisc(uint16_t timeout, uint8_t timeoutLevel, uint8_t ctcssFrequency, uint8_t ctcssHighThreshold, uint8_t ctcssLowThreshold, uint8_t ctcssLevel, uint8_t kerchunkTime, bool kerchunkTX, uint8_t hangTime, bool useCOS, bool cosInvert, uint8_t rfAudioBoost, uint8_t maxDev, uint8_t rxLevel)
 {
   m_useCOS    = useCOS;
   m_cosInvert = cosInvert;
@@ -191,7 +192,10 @@ uint8_t CFM::setMisc(uint16_t timeout, uint8_t timeoutLevel, uint8_t ctcssFreque
   m_rfAudioBoost = q15_t(rfAudioBoost);
 
   m_timeoutTimer.setTimeout(timeout, 0U);
+
   m_kerchunkTimer.setTimeout(kerchunkTime, 0U);
+  m_kerchunkTX = kerchunkTX;
+
   m_hangTimer.setTimeout(hangTime, 0U);
 
   m_timeoutTone.setParams(timeoutLevel);
@@ -235,14 +239,16 @@ void CFM::stateMachine(bool validSignal)
   }
 
   if (m_state == FS_LISTENING && m_modemState == STATE_FM) {
-    DEBUG1("Change to STATE_IDLE");
-    m_modemState = STATE_IDLE;
-    m_callsignTimer.stop();
-    m_timeoutTimer.stop();
-    m_kerchunkTimer.stop();
-    m_ackMinTimer.stop();
-    m_ackDelayTimer.stop();
-    m_hangTimer.stop();
+    if (!m_callsign.isWanted() && !m_rfAck.isWanted()) {
+      DEBUG1("Change to STATE_IDLE");
+      m_modemState = STATE_IDLE;
+      m_callsignTimer.stop();
+      m_timeoutTimer.stop();
+      m_kerchunkTimer.stop();
+      m_ackMinTimer.stop();
+      m_ackDelayTimer.stop();
+      m_hangTimer.stop();
+    }
   }
 }
 
@@ -273,14 +279,19 @@ void CFM::listeningState(bool validSignal)
         sendCallsign();
     }
 
-    insertSilence(50U);
+    if (m_state == FS_RELAYING || (m_state == FS_KERCHUNK && m_kerchunkTX)) {
+      insertSilence(50U);
 
-    beginRelaying();
+      beginRelaying();
 
-    m_callsignTimer.start();
+      m_callsignTimer.start();
 
-    DEBUG1("Change to STATE_FM");
-    m_modemState = STATE_FM;
+      io.setDecode(true);
+      io.setADCDetection(true);
+
+      DEBUG1("Change to STATE_FM");
+      m_modemState = STATE_FM;
+    }
   }
 }
 
@@ -295,8 +306,24 @@ void CFM::kerchunkState(bool validSignal)
         sendCallsign();
         m_callsignTimer.start();
       }
+      if (!m_kerchunkTX) {
+        insertSilence(50U);
+
+        beginRelaying();
+
+        m_callsignTimer.start();
+
+        io.setDecode(true);
+        io.setADCDetection(true);
+
+        DEBUG1("Change to STATE_FM");
+        m_modemState = STATE_FM;
+      }
     }
   } else {
+    io.setDecode(false);
+    io.setADCDetection(false);
+
     DEBUG1("State to LISTENING");
     m_state = FS_LISTENING;
     m_kerchunkTimer.stop();
@@ -317,6 +344,9 @@ void CFM::relayingState(bool validSignal)
       m_timeoutTone.start();
     }
   } else {
+    io.setDecode(false);
+    io.setADCDetection(false);
+
     DEBUG1("State to RELAYING_WAIT");
     m_state = FS_RELAYING_WAIT;
     m_ackDelayTimer.start();
@@ -331,6 +361,9 @@ void CFM::relayingState(bool validSignal)
 void CFM::relayingWaitState(bool validSignal)
 {
   if (validSignal) {
+    io.setDecode(true);
+    io.setADCDetection(true);
+
     DEBUG1("State to RELAYING");
     m_state = FS_RELAYING;
     m_ackDelayTimer.stop();
@@ -366,6 +399,9 @@ void CFM::relayingWaitState(bool validSignal)
 void CFM::hangState(bool validSignal)
 {
   if (validSignal) {
+    io.setDecode(true);
+    io.setADCDetection(true);
+
     DEBUG1("State to RELAYING");
     m_state = FS_RELAYING;
     DEBUG1("Stop ack");
@@ -393,6 +429,9 @@ void CFM::hangState(bool validSignal)
 void CFM::timeoutState(bool validSignal)
 {
   if (!validSignal) {
+    io.setDecode(false);
+    io.setADCDetection(false);
+
     DEBUG1("State to TIMEOUT_WAIT");
     m_state = FS_TIMEOUT_WAIT;
     m_ackDelayTimer.start();
@@ -407,6 +446,9 @@ void CFM::timeoutState(bool validSignal)
 void CFM::timeoutWaitState(bool validSignal)
 {
   if (validSignal) {
+    io.setDecode(true);
+    io.setADCDetection(true);
+
     DEBUG1("State to TIMEOUT");
     m_state = FS_TIMEOUT;
     m_ackDelayTimer.stop();

FM.h

@@ -56,7 +56,7 @@ public:
 
   uint8_t setCallsign(const char* callsign, uint8_t speed, uint16_t frequency, uint8_t time, uint8_t holdoff, uint8_t highLevel, uint8_t lowLevel, bool callsignAtStart, bool callsignAtEnd, bool callsignAtLatch);
   uint8_t setAck(const char* rfAck, uint8_t speed, uint16_t frequency, uint8_t minTime, uint16_t delay, uint8_t level);
-  uint8_t setMisc(uint16_t timeout, uint8_t timeoutLevel, uint8_t ctcssFrequency, uint8_t ctcssHighThreshold, uint8_t ctcssLowThreshold, uint8_t ctcssLevel, uint8_t kerchunkTime, uint8_t hangTime, bool useCOS, bool cosInvert, uint8_t rfAudioBoost, uint8_t maxDev, uint8_t rxLevel);
+  uint8_t setMisc(uint16_t timeout, uint8_t timeoutLevel, uint8_t ctcssFrequency, uint8_t ctcssHighThreshold, uint8_t ctcssLowThreshold, uint8_t ctcssLevel, uint8_t kerchunkTime, bool kerchunkTX, uint8_t hangTime, bool useCOS, bool cosInvert, uint8_t rfAudioBoost, uint8_t maxDev, uint8_t rxLevel);
 
 private:
   CFMKeyer             m_callsign;
@@ -72,6 +72,7 @@ private:
   CFMTimer             m_timeoutTimer;
   CFMTimer             m_holdoffTimer;
   CFMTimer             m_kerchunkTimer;
+  bool                 m_kerchunkTX;
   CFMTimer             m_ackMinTimer;
   CFMTimer             m_ackDelayTimer;
   CFMTimer             m_hangTimer;

FMKeyer.cpp

@@ -205,6 +205,11 @@ void CFMKeyer::stop()
   m_audioPos = 0U;
 }
 
+bool CFMKeyer::isWanted() const
+{
+  return m_wanted;
+}
+
 bool CFMKeyer::isRunning() const
 {
   return m_poPos > 0U || m_dotPos > 0U || m_audioPos > 0U;

FMKeyer.h

@@ -35,6 +35,8 @@ public:
 
   bool isRunning() const;
 
+  bool isWanted() const;
+
 private:
   bool     m_wanted;
   uint8_t  m_poBuffer[1000U];

IOSTM_CMSIS.cpp

@@ -41,7 +41,6 @@ YSF      PB8    output
 P25      PB9    output
 NXDN     PB10   output
 POCSAG   PB11   output
-FM       PB12   output
 
 RX       PB0    analog input (ADC1_8)
 RSSI     PB1    analog input (ADC2_9)
@@ -85,9 +84,6 @@ USART1_RXD PA10  input (AF)
 #define PIN_POCSAG        11
 #define PORT_POCSAG       GPIOB
 #define BB_POCSAG         *((bitband_t)BITBAND_PERIPH(&PORT_POCSAG->ODR, PIN_POCSAG))
-#define PIN_FM            14
-#define PORT_FM           GPIOB
-#define BB_FM             *((bitband_t)BITBAND_PERIPH(&PORT_FM->ODR, PIN_FM))
 
 #define PIN_RX            0
 #define PIN_RX_ADC_CH     8
@@ -158,35 +154,16 @@ void GPIOConfigPin(GPIO_TypeDef *port_ptr, uint32_t pin, uint32_t mode_cnf_value
 #if defined(STM32F1_POG)
 void FancyLEDEffect()
 {
-  int ledCount = 10;
+  bitband_t foo[] = {&BB_LED, &BB_COSLED, &BB_PTT, &BB_DMR, &BB_DSTAR, &BB_YSF, &BB_P25};
    
-  bitband_t foo[] = {&BB_LED, &BB_COSLED, &BB_PTT, &BB_DMR, &BB_DSTAR, &BB_YSF, &BB_P25,
-#if defined(USE_ALTERNATE_NXDN_LEDS)
-	NULL,
-#else
-	&BB_NXDN,
-#endif
-#if defined(USE_ALTERNATE_POCSAG_LEDS)
-	NULL,
-#else
-  	&BB_POCSAG,
-#endif
-#if defined(USE_ALTERNATE_FM_LEDS)
-	NULL};
-#else
-	&BB_FM};
-#endif
-
-  for(int i=0; i<ledCount; i++){
-    if(foo[i] != NULL)
-      *foo[i] = 0x01;
+  for(int i=0; i<7; i++){
+    *foo[i] = 0x01;
   }
   GPIOConfigPin(PORT_USART1_TXD, PIN_USART1_TXD, GPIO_CRL_MODE0_1);
   *((bitband_t)BITBAND_PERIPH(&PORT_USART1_TXD->ODR, PIN_USART1_TXD)) = 0x00;
   delay(SystemCoreClock/1000*100);
-  for(int i=0; i<ledCount; i++){
-    if(foo[i] != NULL)
-      *foo[i] = 0x00;
+  for(int i=0; i<7; i++){
+    *foo[i] = 0x00;
   }
   *((bitband_t)BITBAND_PERIPH(&PORT_USART1_TXD->ODR, PIN_USART1_TXD)) = 0x01;
   delay(SystemCoreClock/1000*20);
@@ -195,22 +172,18 @@ void FancyLEDEffect()
   *((bitband_t)BITBAND_PERIPH(&PORT_USART1_TXD->ODR, PIN_USART1_TXD)) = 0x01;
   
   *foo[0] = 0x01;
-  for(int i=1; i<ledCount; i++){
+  for(int i=1; i<7; i++){
     delay(SystemCoreClock/1000*10);
-    if (foo[i-1] != NULL)
-      *foo[i-1] = 0x00;
-    if (foo[i] != NULL)
-      *foo[i] = 0x01;
+    *foo[i-1] = 0x00;
+    *foo[i] = 0x01;
   }
-  for(int i=ledCount - 2; i>=0; i--) {
+  for(int i=5; i>=0; i--){
     delay(SystemCoreClock/1000*10);
-    if (foo[i+1] != NULL)
-      *foo[i+1] = 0x00;
-    if (foo[i] != NULL)
-      *foo[i] = 0x01;
+    *foo[i+1] = 0x00;
+    *foo[i] = 0x01;
   }
   delay(SystemCoreClock/1000*10);
-  *foo[0] = 0x00;
+  *foo[5+1-6] = 0x00;
   *((bitband_t)BITBAND_PERIPH(&PORT_USART1_TXD->ODR, PIN_USART1_TXD)) = 0x00;
   delay(SystemCoreClock/1000*10);
   *((bitband_t)BITBAND_PERIPH(&PORT_USART1_TXD->ODR, PIN_USART1_TXD)) = 0x01;
@@ -255,9 +228,6 @@ static inline void GPIOInit()
 #if !defined(USE_ALTERNATE_POCSAG_LEDS)
   GPIOConfigPin(PORT_POCSAG, PIN_POCSAG, GPIO_CRL_MODE0_1);
 #endif
-#if !defined(USE_ALTERNATE_FM_LEDS)
-  GPIOConfigPin(PORT_FM,     PIN_FM,     GPIO_CRL_MODE0_1);
-#endif
 
   GPIOConfigPin(PORT_RX, PIN_RX, 0);
 #if defined(SEND_RSSI_DATA)
@@ -495,8 +465,6 @@ void CIO::setFMInt(bool on)
 #if defined(USE_ALTERNATE_FM_LEDS)
   BB_DSTAR = !!on;
   BB_YSF   = !!on;
-#else
-  BB_FM = !!on;
 #endif
 }
 

Makefile

@@ -155,7 +155,7 @@ LDFLAGS_F722 =-T stm32f722_link.ld $(MCFLAGS_F7) --specs=nosys.specs $(INCLUDES_
 # Common flags
 CFLAGS=-Os -ffunction-sections -fdata-sections -fno-builtin -Wno-implicit -DCUSTOM_NEW -DNO_EXCEPTIONS
 CXXFLAGS=-Os -fno-exceptions -ffunction-sections -fdata-sections -fno-builtin -fno-rtti -DCUSTOM_NEW -DNO_EXCEPTIONS
-LDFLAGS=-Os --specs=nano.specs
+LDFLAGS=-Os --specs=nano.specs -Wl,-Map=bin/mmdvm.map
 
 # Build Rules
 .PHONY: all release dis pi pi-f722 f4m nucleo f767 dvm drcc_nqf clean

NXDNTX.cpp

@@ -54,7 +54,7 @@ m_poBuffer(),
 m_poLen(0U),
 m_poPtr(0U),
 m_txDelay(240U),     // 200ms
-m_txHang(6000U),     // 5s
+m_txHang(3000U),     // 5s
 m_txCount(0U)
 {
   ::memset(m_modState, 0x00U, 16U * sizeof(q15_t));
@@ -72,10 +72,7 @@ m_txCount(0U)
 
 void CNXDNTX::process()
 {
-  if (m_buffer.getData() == 0U && m_poLen == 0U && m_txCount == 0U)
-    return;
-
-  if (m_poLen == 0U) {
+  if (m_poLen == 0U && m_buffer.getData() > 0U) {
     if (!m_tx) {
       for (uint16_t i = 0U; i < m_txDelay; i++)
         m_poBuffer[m_poLen++] = NXDN_SYNC;
@@ -200,5 +197,5 @@ uint8_t CNXDNTX::getSpace() const
 
 void CNXDNTX::setParams(uint8_t txHang)
 {
-  m_txHang = txHang * 1200U;
+  m_txHang = txHang * 600U;
 }

P25TX.cpp

@@ -70,10 +70,7 @@ m_txCount(0U)
 
 void CP25TX::process()
 {
-  if (m_buffer.getData() == 0U && m_poLen == 0U && m_txCount == 0U)
-    return;
-
-  if (m_poLen == 0U) {
+  if (m_poLen == 0U && m_buffer.getData() > 0U) {
     if (!m_tx) {
       for (uint16_t i = 0U; i < m_txDelay; i++)
         m_poBuffer[m_poLen++] = P25_START_SYNC;

README.md

@@ -1,7 +1,17 @@
-This is the source code of the MMDVM firmware that supports D-Star, DMR, System Fusion, P25, NXDN, and POCSAG modes.
+This is the source code of the MMDVM firmware that supports D-Star, DMR,
+System Fusion, P25, NXDN, POCSAG, and FM modes.
 
-It runs on the Arduino Due, the ST-Micro STM32F1xxx, STM32F4xxx and STM32F7xxx processors, as well as the Teensy 3.1/3.2/3.5/3.6. What these platforms have in common is the use of an ARM Cortex-M3 or M4 processor with a clock speed greater than 70 MHz, and access to at least one analogue to digital converter and one digital to analogue converter.
+It runs on the Arduino Due, the ST-Micro STM32F1xxx, STM32F4xxx and STM32F7xxx
+processors, as well as the Teensy 3.1/3.2/3.5/3.6. What these platforms have in
+common is the use of an ARM Cortex-M3, M4, or M7 processors with a clock speed
+greater than 70 MHz, and access to at least one analogue to digital converter
+and one digital to analogue converter.
 
-In order to build this software for the Arduino Due, you will need to edit a file within the Arduino GUI and that is detailed in the BUILD.txt file. The STM32 support is being supplied via the Coocox IDE with ARM GCC. The Teensy support uses Teensyduino.
+In order to build this software for the Arduino Due, you will need to edit a
+file within the Arduino GUI and that is detailed in the BUILD.txt file. The
+STM32 support is being supplied via the ARM GCC compiler. The Teensy support
+uses Teensyduino.
 
-This software is licenced under the GPL v2 and is intended for amateur and educational use only. Use of this software for commercial purposes is strictly forbidden.
+This software is licenced under the GPL v2 and is intended for amateur and
+educational use only. Use of this software for commercial purposes is strictly
+forbidden.

SerialPort.cpp

@@ -103,7 +103,7 @@ const uint8_t MMDVM_DEBUG5       = 0xF5U;
 #define	HW_TYPE	"MMDVM"
 #endif
 
-#define DESCRIPTION "20200512 (D-Star/DMR/System Fusion/P25/NXDN/POCSAG/FM)"
+#define DESCRIPTION "20200620 (D-Star/DMR/System Fusion/P25/NXDN/POCSAG/FM)"
 
 #if defined(GITVERSION)
 #define concat(h, a, b, c) h " " a " " b " GitID #" c ""
@@ -433,12 +433,13 @@ uint8_t CSerialPort::setFMParams3(const uint8_t* data, uint8_t length)
 
   bool     useCOS         = (data[8U] & 0x01U) == 0x01U;
   bool     cosInvert      = (data[8U] & 0x02U) == 0x02U;
+  bool     kerchunkTX     = (data[8U] & 0x04U) == 0x04U;
 
   uint8_t  rfAudioBoost   = data[9U];
   uint8_t  maxDev         = data[10U];
   uint8_t  rxLevel        = data[11U];
 
-  return fm.setMisc(timeout, timeoutLevel, ctcssFrequency, ctcssHighThreshold, ctcssLowThreshold, ctcssLevel, kerchunkTime, hangTime, useCOS, cosInvert, rfAudioBoost, maxDev, rxLevel);
+  return fm.setMisc(timeout, timeoutLevel, ctcssFrequency, ctcssHighThreshold, ctcssLowThreshold, ctcssLevel, kerchunkTime, kerchunkTX, hangTime, useCOS, cosInvert, rfAudioBoost, maxDev, rxLevel);
 }
 
 uint8_t CSerialPort::setMode(const uint8_t* data, uint8_t length)

SerialSTM.cpp

@@ -906,7 +906,7 @@ int CSerialPort::availableForWriteInt(uint8_t n)
          #if defined(STM32F4_NUCLEO) && defined(STM32F4_NUCLEO_ARDUINO_HEADER)
          return AvailForWriteUSART1();
          #elif defined(DRCC_DVM)
-         AvailForWriteUSART2();
+         return AvailForWriteUSART2();
          #else
          return AvailForWriteUART5();
          #endif

YSFTX.cpp

@@ -66,9 +66,6 @@ m_txCount(0U)
 
 void CYSFTX::process()
 {
-  if (m_buffer.getData() == 0U && m_poLen == 0U && m_txCount == 0U)
-    return;
-
   // If we have YSF data to transmit, do so.
   if (m_poLen == 0U && m_buffer.getData() > 0U) {
     if (!m_tx) {
@@ -191,4 +188,3 @@ void CYSFTX::setParams(bool on, uint8_t txHang)
   m_loDev  = on;
   m_txHang = txHang * 1200U;
 }
-

pins/pins_f4_drcc_nqf.h

@@ -22,36 +22,40 @@
 /*
 Pin definitions for DRCC_DVM BG7NQF  board rev1
 
-PTT      PB12   output
-LED_PTT  PB4    output
-LED_COS  PB5    output
-LED_SRV  PB10   output
-COS      PB13   input
+TX/PTT_LED  PB12   output
+RX/COS_LED  PB5    output
+STATUS_LED  PB10   output
 
-DSTAR    N/A
-DMR      N/A
-YSF      N/A
-P25      N/A
-NXDN     N/A
-POCSAG   N/A
+COS_IN      PB13   input
 
-MDSTAR   PB14   output
-MDMR     PB8    output
-MYSF     PB9    output
-MP25     PB15   output
-MNXDN    N/A
-MPOCSAG  N/A
+DSTAR       N/A
+DMR         N/A
+YSF         N/A
+P25         N/A
+NXDN        N/A
+POCSAG      N/A
 
-RX       PB0    analog input
-RSSI     PB1    analog input
-TX       PA4    analog output
+MDMR/BIT0   PB8    output
+MYSF/BIT1   PB9    output
+MDSTAR/BIT2 PB14   output
+MP25/BIT3   PB15   output          Generic Mode Pins
+MNXDN       N/A
+MPOCSAG     N/A
 
-EXT_CLK  PA15   input
+RX          PA0    analog input
+RSSI        PA1    analog input
+TX          PA4    analog output
 
-UART1_TX PA9    output
-UART1_RX PA10   output
-UART2_TX PA2    output
-UART2_RX PA3    output
+EXT_CLK     PA15   input
+
+UART1_TX    PA9    output
+UART1_RX    PA10   output          Host Data Communication
+
+UART2_TX    PA2    output
+UART2_RX    PA3    output          Nextion Data Communication
+
+I2C1_SCL    PB6    output
+I2C1_SDA    PB7    output          OLED Data Communication as master
 
 */
 
@@ -124,13 +128,13 @@ UART2_RX PA3    output
 
 #define PIN_RX            GPIO_Pin_0
 #define PIN_RX_CH         ADC_Channel_0
-#define PORT_RX           GPIOB
-#define RCC_Per_RX        RCC_AHB1Periph_GPIOB
+#define PORT_RX           GPIOA
+#define RCC_Per_RX        RCC_AHB1Periph_GPIOA
 
 #define PIN_RSSI          GPIO_Pin_1
 #define PIN_RSSI_CH       ADC_Channel_1
-#define PORT_RSSI         GPIOB
-#define RCC_Per_RSSI      RCC_AHB1Periph_GPIOB
+#define PORT_RSSI         GPIOA
+#define RCC_Per_RSSI      RCC_AHB1Periph_GPIOA
 
 #define PIN_TX            GPIO_Pin_4
 #define PIN_TX_CH         DAC_Channel_1