Merge pull request #183 from Hootie81/VK6MST_Shield

Add support for VK6MST_Shield

Config.h

@@ -45,7 +45,7 @@
 // #define ARDUINO_DUE_PAPA
 
 // For the ZUM V1.0 and V1.0.1 boards pin layout
-#define ARDUINO_DUE_ZUM_V10
+//#define ARDUINO_DUE_ZUM_V10
 
 // For the SQ6POG board
 // #define STM32F1_POG
@@ -60,6 +60,9 @@
 // Use separate mode pins to switch external filters/bandwidth for example
 // #define STM32F4_NUCLEO_MODE_PINS
 
+// For the VK6MST Pi3 Shield communicating over i2c. i2c address & speed defined in i2cTeensy.cpp
+#define VK6MST_TEENSY_PI3_SHIELD_I2C
+
 // Pass RSSI information to the host
 // #define SEND_RSSI_DATA
 

I2CTeensy.cpp

@@ -0,0 +1,225 @@
+/*
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *   28-4-2017 Created for MMDVM Pi shield for Teensy by Chris Huitema
+ */
+
+#include "Config.h"
+#include "Globals.h"
+
+#if defined(VK6MST_TEENSY_PI3_SHIELD_I2C)
+
+#include <i2c_t3.h>   //available here https://github.com/nox771/i2c_t3 or maybe the normal wire will work #include <wire.h> justs need to test i guess
+
+#define I2C_ADDRESS   0x22
+#define I2C_SPEED     100000
+
+// Function prototypes
+void receiveEvent(size_t count);
+void requestEvent(void);
+
+#define TX_FIFO_SIZE 512U
+#define RX_FIFO_SIZE 512U
+
+volatile uint8_t  TXfifo[TX_FIFO_SIZE];
+volatile uint8_t  RXfifo[RX_FIFO_SIZE];
+volatile uint16_t TXfifohead, TXfifotail;
+volatile uint16_t RXfifohead, RXfifotail;
+
+// Init queues
+void TXfifoinit(void)
+{
+   TXfifohead = 0U;
+   TXfifotail = 0U;
+}
+
+void RXfifoinit()
+{
+   RXfifohead = 0U;
+   RXfifotail = 0U;
+}
+
+// How full is queue
+
+uint16_t TXfifolevel(void)
+{
+   uint32_t tail = TXfifotail;
+   uint32_t head = TXfifohead;
+
+   if (tail > head)
+      return TX_FIFO_SIZE + head - tail;
+   else
+      return head - tail;
+}
+
+uint16_t RXfifolevel(void)
+{
+   uint32_t tail = RXfifotail;
+   uint32_t head = RXfifohead;
+
+   if (tail > head)
+      return RX_FIFO_SIZE + head - tail;
+   else
+      return head - tail;
+}
+
+
+uint8_t TXfifoput(uint8_t next)
+{
+   if (TXfifolevel() < TX_FIFO_SIZE) {
+      TXfifo[TXfifohead] = next;
+
+      TXfifohead++;
+      if (TXfifohead >= TX_FIFO_SIZE)
+         TXfifohead = 0U;
+      return 1U;
+   } else {
+      return 0U; // signal an overflow occurred by returning a zero count
+   }
+}
+
+void I2Cbegin(void)
+{
+  // Setup for Slave mode, address 0x22, pins 18/19, external pullups, speed in hz
+  Wire.begin(I2C_SLAVE, I2C_ADDRESS, I2C_PINS_18_19, I2C_PULLUP_EXT, I2C_SPEED);
+
+    // register events
+    Wire.onReceive(receiveEvent);
+    Wire.onRequest(requestEvent);
+
+    // initialize the fifos
+    TXfifoinit();
+    RXfifoinit();
+}
+
+
+int I2Cavailable(void)
+{
+  if (RXfifolevel() > 0U)
+      return 1U;
+    else
+      return 0U;
+}
+
+
+uint8_t I2Cread(void)
+{
+  uint8_t data_c = RXfifo[RXfifotail];
+
+   RXfifotail++;
+   if (RXfifotail >= RX_FIFO_SIZE)
+      RXfifotail = 0U;
+
+   return data_c;
+}
+
+
+void I2Cwrite(const uint8_t* data, uint16_t length)
+{
+   for (uint16_t i = 0U; i < length; i++)
+      TXfifoput(data[i]);   //puts it in the fifo
+}
+
+//
+// handle Rx Event (incoming I2C data)
+//
+void receiveEvent(size_t count)
+{
+  for (uint16_t i = 0U; i < count; i++)
+  {
+    if (RXfifolevel() < RX_FIFO_SIZE) {
+      RXfifo[RXfifohead] = Wire.readByte();
+      if (RXfifo[RXfifohead] != -1){
+        RXfifohead++;
+        if (RXfifohead >= RX_FIFO_SIZE) RXfifohead = 0U;
+      }
+    } else {
+      Wire.readByte();                  // drop data if mem full.
+    }
+    
+  }
+}
+
+//
+// handle Tx Event (outgoing I2C data)
+//
+void requestEvent(void)
+{
+    if (TXfifolevel() > 0) {
+      if (Wire.write(TXfifo[TXfifotail])){  //write to i2c
+        TXfifotail++;
+        if (TXfifotail >= TX_FIFO_SIZE) TXfifotail = 0U;
+      }  
+    }
+}
+
+
+
+/************************************/
+
+void CSerialPort::beginInt(uint8_t n, int speed)
+{
+  switch (n) {
+    case 1U:
+      return I2Cbegin();
+    case 3U:
+      Serial3.begin(speed);
+      break;
+    default:
+      break;
+  }
+}
+
+int CSerialPort::availableInt(uint8_t n)
+{
+  switch (n) {
+    case 1U:
+      return I2Cavailable();
+    case 3U:
+      return Serial3.available();
+    default:
+      return false;
+  }
+}
+
+uint8_t CSerialPort::readInt(uint8_t n)
+{
+  switch (n) {
+    case 1U:
+      return I2Cread();
+    case 3U:
+      return Serial3.read();
+    default:
+      return 0U;
+  }
+}
+
+void CSerialPort::writeInt(uint8_t n, const uint8_t* data, uint16_t length, bool flush)
+{
+  switch (n) {
+    case 1U:
+      I2Cwrite(data, length);
+      break;
+    case 3U:
+      Serial3.write(data, length);
+      if (flush)
+        Serial3.flush();
+      break;
+    default:
+      break;
+  }
+}
+
+#endif

SerialArduino.cpp

@@ -21,7 +21,10 @@
 
 #include "SerialPort.h"
 
-#if defined(__SAM3X8E__) || defined(__MK20DX256__) || defined(__MK64FX512__) || defined(__MK66FX1M0__)
+#if defined(VK6MST_TEENSY_PI3_SHIELD_I2C)
+//it will load I2CTeensy.cpp
+
+#elif defined(__SAM3X8E__) || defined(__MK20DX256__) || defined(__MK64FX512__) || defined(__MK66FX1M0__)
 
 void CSerialPort::beginInt(uint8_t n, int speed)
 {