fix: use consistent subscripts in equations
Attributes should be lower case and upright (\mathrm{})
This commit is contained in:
@@ -20,10 +20,10 @@ Der Wirkungsgrad der Schaltung ist sehr niedrig, da die Verluste im Vorwiderstan
|
||||
<tip>
|
||||
Lösungsweg:
|
||||
Spannung am Lastwiderstand: $U_L = I_L \cdot R_L = \qty{10}{\milli\ampere} \cdot \qty{470}{\ohm} = \qty{4700}{\milli\volt} = \qty{4,7}{\volt}$
|
||||
Leistung im Lastwiderstand: $P_{out} = \qty{4,7}{\volt} \cdot \qty{10}{\milli\ampere} = \qty{47}{\milli\watt}$
|
||||
Leistung im Lastwiderstand: $P_{\mathrm{out}} = \qty{4,7}{\volt} \cdot \qty{10}{\milli\ampere} = \qty{47}{\milli\watt}$
|
||||
Verlustleistung in der Z-Diode: $P_{VZ} = \qty{4,7}{\volt} \cdot \qty{15}{\milli\ampere} = \qty{70,5}{\milli\watt}$
|
||||
Eingangsstrom: $I_g = \qty{10}{\milli\ampere} + \qty{15}{\milli\ampere} = \qty{25}{\milli\ampere}$
|
||||
Eingangsleistung: $P_{in} = \qty{13,8}{\volt} \cdot \qty{25}{\milli\ampere} = \qty{345}{\milli\watt}$
|
||||
Eingangsleistung: $P_{\mathrm{in}} = \qty{13,8}{\volt} \cdot \qty{25}{\milli\ampere} = \qty{345}{\milli\watt}$
|
||||
Wirkungsgrad: $\eta = \frac{P_{out}}{P_{in}} = \frac{\qty{47}{\milli\watt}}{\qty{345}{\milli\watt}} = \num{0,1}$
|
||||
|
||||
</tip>
|
||||
@@ -48,21 +48,21 @@ Unter der Regelung befindet sich ein großer Kühlkörper mit den Längstransist
|
||||
|
||||
|
||||
[question:AD315]
|
||||
Die Verlustleistung $P_V$ ergibt sich aus der Differenz von $P_{in} - P_{out}$.
|
||||
Die Verlustleistung $P_V$ ergibt sich aus der Differenz von $P_{\mathrm{in}} - P_{\mathrm{out}}$.
|
||||
|
||||
------
|
||||
[question:AD319]
|
||||
Die Verlustleistung $P_V$ bestimmt auch den Wirkungsgrad eines Spannungsreglers. Bei linearen Spanungsreglern ist der Wirkungsgrad systembedingt oft sehr niedrig. Mit der folgenden Formel lässt sich der Wirkungsgrad berechnen:
|
||||
Wirkungsgrad = abgegebene Leistung auf der Lastseite : gesamte Eingangsleistung
|
||||
$\eta = \frac{P_{out}}{P_{in}}$
|
||||
$\eta = \frac{P_{\mathrm{out}}}{P_{\mathrm{in}}}$
|
||||
|
||||
<tip>
|
||||
Eingangsleistung = Eingangsspannung x Laststrom
|
||||
$P_{in} = U_{in} \cdot I_{L}$
|
||||
$P_{in} = \qty{13,8}{\volt} \cdot \qty{0.9}{\ampere} = \qty{12,42}{\watt}$
|
||||
$P_{\mathrm{in}} = U_{\mathrm{in}} \cdot I_L$
|
||||
$P_{\mathrm{in}} = \qty{13,8}{\volt} \cdot \qty{0,9}{\ampere} = \qty{12,42}{\watt}$
|
||||
Ausgangsleistung = Ausgangsspannung x Laststrom
|
||||
$P_{out} = U_{out} \cdot I_{L}$
|
||||
$P_{out} = \qty{9}{\volt} \cdot \qty{0.9}{\ampere} = \qty{8,1}{\watt}$
|
||||
$P_{\mathrm{out}} = U_{\mathrm{out}} \cdot I_L$
|
||||
$P_{\mathrm{out}} = \qty{9}{\volt} \cdot \qty{0,9}{\ampere} = \qty{8,1}{\watt}$
|
||||
</tip>
|
||||
---
|
||||
[question:AD320]
|
||||
@@ -70,13 +70,13 @@ $P_{out} = \qty{9}{\volt} \cdot \qty{0.9}{\ampere} = \qty{8,1}{\watt}$
|
||||
<tip>
|
||||
Der Lösungsweg beginnt mit der Berechnung der Einzelleistungen.
|
||||
Eingangsleistung = Eingangsspannung x Laststrom
|
||||
$P_{in} = U_{in} \cdot I_{L}$
|
||||
$P_{in} = \qty{13,8}{\volt} \cdot \qty{0.455}{\ampere} = \qty{6,28}{\watt}$
|
||||
$P_{\mathrm{in}} = U_{\mathrm{in}} \cdot I_L$
|
||||
$P_{\mathrm{in}} = \qty{13,8}{\volt} \cdot \qty{0,455}{\ampere} = \qty{6,28}{\watt}$
|
||||
Ausgangsleistung = Ausgangsspannung x Laststrom
|
||||
$P_{out} = U_{out} \cdot I_{L}$
|
||||
$P_{out} = \qty{5}{\volt} \cdot \qty{0,450}{\ampere} = \qty{2,25}{\watt}$
|
||||
$P_{\mathrm{out}} = U_{\mathrm{out}} \cdot I_L$
|
||||
$P_{\mathrm{out}} = \qty{5}{\volt} \cdot \qty{0,450}{\ampere} = \qty{2,25}{\watt}$
|
||||
|
||||
$\eta = \frac{P_{out}}{P_{in}} = \frac{\qty{2,25}{\watt}}{\qty{6,28}{\watt}} = \num{0,36}$
|
||||
$\eta = \frac{P_{\mathrm{out}}}{P_{\mathrm{in}}} = \frac{\qty{2,25}{\watt}}{\qty{6,28}{\watt}} = \num{0,36}$
|
||||
</tip>
|
||||
|
||||
3. *Festspannungsregler* in einer integrierten Schaltung
|
||||
@@ -91,14 +91,14 @@ Festspannungsregler arbeiten wie lineare Spannungsregler mit Längstransistor un
|
||||
Der Lösungsweg beginnt mit der Berechnung des Laststromes: $I_L = \frac{\qty{5}{\volt}}{\qty{10}{\ohm}} = \qty{0,5}{\ampere}$
|
||||
Eingangsleistung = Eingangsspannung x Laststrom
|
||||
Hinweis: Der Strom in der Masseleitung des Festspannungsreglers ist vernachlässigbar klein und wird deshalb nicht berücksichtigt.
|
||||
$P_{in} = U_{in} \cdot I_{L} = \qty{13,8}{\volt} \cdot \qty{0,5}{\ampere} = \qty{6,9}{\watt}$
|
||||
$P_{\mathrm{in}} = U_{\mathrm{in}} \cdot I_L = \qty{13,8}{\volt} \cdot \qty{0,5}{\ampere} = \qty{6,9}{\watt}$
|
||||
|
||||
Ausgangsleistung = Ausgangsspannung x Laststrom
|
||||
$P_{out} = U_{out} \cdot I_{L} = \qty{5}{\volt} \cdot \qty{0,5}{\ampere} = \qty{2,5}{\watt}$
|
||||
$P_{\mathrm{out}} = U_{\mathrm{out}} \cdot I_L = \qty{5}{\volt} \cdot \qty{0,5}{\ampere} = \qty{2,5}{\watt}$
|
||||
</tip>
|
||||
Die Verlustleistung $P_V$ des Festspannungsreglers ergibt sich aus der Differenz von $P_{in}$ und $P_{out}$.
|
||||
Die Verlustleistung $P_V$ des Festspannungsreglers ergibt sich aus der Differenz von $P_{\mathrm{in}}$ und $P_{\mathrm{out}}$.
|
||||
|
||||
$P_V = P_{in} - P_{out} = \qty{6,9}{\watt} - \qty{2,5}{\watt} = \qty{4,4}{\watt}$
|
||||
$P_V = P_{\mathrm{in}} - P_{\mathrm{out}} = \qty{6,9}{\watt} - \qty{2,5}{\watt} = \qty{4,4}{\watt}$
|
||||
|
||||
<margin>
|
||||
[photo:245:a_Festspannungsregler:Festspannungsregler für $\qty{5}{\volt}$, $\qty{12}{\volt}$ und $\qty{9}{\volt}$ auf Kühlkörper]
|
||||
|
||||
Reference in New Issue
Block a user